diff --git a/gui/cppcheck_de.ts b/gui/cppcheck_de.ts
index a584c675c..6afd4d7f2 100644
--- a/gui/cppcheck_de.ts
+++ b/gui/cppcheck_de.ts
@@ -430,16 +430,16 @@ Parameter: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ Cppcheck
@@ -626,8 +626,8 @@ Parameter: -l(line) (file)
-
-
+
+ Information
@@ -893,22 +893,22 @@ Parameter: -l(line) (file)
&Hilfe
-
+ Verzeichnis zum Überprüfen auswählen
-
+ Keine passenden Dateien zum Überprüfen gefunden!
-
+ Schnellfilter:
-
+
@@ -917,7 +917,7 @@ Do you want to load this project file instead?
Möchten Sie stattdessen diese öffnen?
-
+
@@ -926,73 +926,73 @@ Do you want to proceed checking without using any of these project files?
-
+ Datei nicht gefunden
-
+ Fehlerhaftes XML
-
+ Fehlendes Attribut
-
+ Falscher Attributwert
-
+ Plattformtyp doppelt
-
+ Plattformtyp neu definiert
-
+ Laden der ausgewählten Bibliothek '%1' schlug fehl. %2
-
+ Laden von %1 fehlgeschlagen. Ihre Cppcheck-Installation ist defekt. Sie können --data-dir=<Verzeichnis> als Kommandozeilenparameter verwenden, um anzugeben, wo die Datei sich befindet.
-
+ Lizenz
-
+ Autoren
-
+ XML-Dateien Version 2 (*.xml);;XML-Dateien Version 1 (*.xml);;Textdateien (*.txt);;CSV-Dateien (*.csv)
-
+ Speichert die Berichtdatei
-
+ XML-Dateien (*.xml)
-
+
@@ -1001,49 +1001,49 @@ This is probably because the settings were changed between the Cppcheck versions
Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bitte prüfen (und korrigieren) Sie die Einstellungen, andernfalls könnte die Editor-Anwendung nicht korrekt starten.
-
+ Sie müssen die Projektdatei schließen, bevor Sie neue Dateien oder Verzeichnisse auswählen!
-
+ Dateien zum Überprüfen auswählen
-
+ C/C++-Code (%1)
-
+ Die Bibliothek '%1' enthält unbekannte Elemente:
%2
-
+ Nicht unterstütztes Format
-
+ Unbekanntes Element
-
+ Unbekannter Fehler
-
+ Fehler
-
+
@@ -1052,12 +1052,12 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ Berichtdatei öffnen
-
+
@@ -1066,59 +1066,59 @@ Do you want to stop the checking and exit Cppcheck?
Möchten Sie die Prüfung abbrechen und Cppcheck beenden?
-
+ XML-Dateien Version 1 (*.xml)
-
+ XML-Dateien Version 2 (*.xml)
-
+ Textdateien (*.txt)
-
+ CSV-Dateien (*.csv)
-
+ Cppcheck - %1
-
-
+
+ Projektdateien (*.cppcheck);;Alle Dateien(*.*)
-
+ Projektdatei auswählen
-
-
+
+ Projekt:
-
+ Projektnamen auswählen
-
+ Keine Projektdatei geladen
-
+
-
+ [Inconclusive][unklar]
@@ -1462,53 +1462,53 @@ Options:
Debug
-
+ RecheckErneut prüfen
-
+ Copy filenameDateiname kopieren
-
+ Copy full pathVollständigen Pfad kopieren
-
+ Copy messageMeldung kopieren
-
+ Copy message idMeldungs-Id kopieren
-
+ HideVerstecken
-
+ Hide all with idVerstecke alle mit gleicher ID
-
+ Open containing folderÜbergeordneten Ordner öffnen
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1517,7 +1517,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1526,12 +1526,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!Datei konnte nicht gefunden werden!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1540,7 +1540,7 @@ Please check the application path and parameters are correct.
Bitte überprüfen Sie ob der Pfad und die Parameter der Anwendung richtig eingestellt sind.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1549,17 +1549,17 @@ Please select the directory where file is located.
Bitte wählen Sie das Verzeichnis, in dem sich die Datei befindet.
-
+ Select DirectoryWähle Verzeichnis
-
+ IdId
-
+ InconclusiveUnklar
@@ -1597,73 +1597,73 @@ Bitte wählen Sie das Verzeichnis, in dem sich die Datei befindet.
ResultsView
-
+ Print ReportBericht drucken
-
+ No errors found, nothing to print.Keine Funde, nichts zu drucken.
-
+ %p% (%1 of %2 files checked)%p% (%1 von %2 Dateien geprüft)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Keine Fehler gefunden.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Es wurden Fehler gefunden, aber sie sind so konfiguriert, ausgeblendet zu werden.
Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werden sollen.
-
-
-
+
+
+ Failed to read the report.Lesen des Berichts fehlgeschlagen.
-
+ SummaryZusammenfassung
-
+ MessageMeldung
-
+ First included byZuerst inkludiert von
-
+ IdId
-
+ No errors found, nothing to save.Keine Fehler gefunden, nichts zu speichern.
-
-
+
+ Failed to save the report.Der Bericht konnte nicht speichern werden.
@@ -1704,13 +1704,13 @@ Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werde
Allgemein
-
+ Include paths:Include-Pfade:
-
-
+
+ Add...Hinzufügen...
@@ -1755,58 +1755,63 @@ Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werde
Auch nach unklaren Fehlern suchen
-
+
+ Show statistics on check completion
+ Zeige Statistiken nach Prüfungsabschluss.
+
+
+ Show internal warnings in logInterne Warnungen im Log anzeigen
-
+ PathsPfade
-
+ EditBearbeiten
-
-
+
+ RemoveEntfernen
-
+ ApplicationsAnwendungen
-
+ Edit...Bearbeiten...
-
+ Set as defaultAls Standard festlegen
-
+ ReportsBerichte
-
+ Save all errors when creating reportAlle Fehler beim Erstellen von Berichten speichern
-
+ Save full path to files in reportsVollständigen Dateipfad in Berichten speichern
-
+ LanguageSprache
@@ -1814,32 +1819,32 @@ Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werde
SettingsDialog
-
+ N/AkA
-
+ Add a new applicationNeue Anwendung hinzufügen
-
+ Modify an applicationAnwendung ändern
-
+ [Default] [Standard]
-
+ [Default][Standard]
-
+ Select include directoryWähle Include-Verzeichnis
diff --git a/gui/cppcheck_es.ts b/gui/cppcheck_es.ts
index d2548e666..f9b9f0313 100644
--- a/gui/cppcheck_es.ts
+++ b/gui/cppcheck_es.ts
@@ -409,16 +409,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -603,8 +603,8 @@ Parameters: -l(line) (file)
-
-
+
+ InformationInformación
@@ -876,75 +876,75 @@ Parameters: -l(line) (file)
Mostrar &ocultos
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
-
+ No suitable files found to check!¡No se han encontrado ficheros para comprobar!
-
+ You must close the project file before selecting new files or directories!¡Tienes que cerrar el proyecto antes de seleccionar nuevos ficheros o carpetas!
-
+ Select directory to checkSelecciona una carpeta para comprobar
-
+ File not foundArchivo no encontrado
-
+ Bad XMLXML malformado
-
+ Missing attributeFalta el atributo
-
+ Bad attribute value
-
+ Unsupported formatFormato no soportado
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ XML files (*.xml)Archivos XML (*.xml)
-
+ Open the report fileAbrir informe
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -953,42 +953,42 @@ Do you want to stop the checking and exit Cppcheck?
¿Quieres parar la comprobación y salir del Cppcheck?
-
+ LicenseLicencia
-
+ AuthorsAutores
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)Archivos XML versión 2 (*.xml);;Archivos XML versión 1 (*.xml);;Archivos de texto (*.txt);;Archivos CSV (*.csv)
-
+ Save the report fileGuardar informe
-
+ Quick Filter:Filtro rápido:
-
+ Select files to checkSelecciona los archivos a comprobar
-
+ C/C++ Source (%1)
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -997,7 +997,7 @@ Do you want to load this project file instead?
¿Quiere cargar este fichero de proyecto en su lugar?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -1006,39 +1006,39 @@ Do you want to proceed checking without using any of these project files?
-
+ The library '%1' contains unknown elements:
%2La biblioteca '%1' contiene elementos deconocidos:
%2
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ ErrorError
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1047,59 +1047,59 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ XML files version 1 (*.xml)Archivos XML versión 1 (*.xml)
-
+ XML files version 2 (*.xml)Archivos XML versión 2 (*.xml)
-
+ Text files (*.txt)Ficheros de texto (*.txt)
-
+ CSV files (*.csv)Ficheros CVS (*.cvs)
-
+ Cppcheck - %1Cppcheck - %1
-
-
+
+ Project files (*.cppcheck);;All files(*.*)Ficheros de proyecto (*.cppcheck;;Todos los ficheros (*.*)
-
+ Select Project FileSelecciona el archivo de proyecto
-
-
+
+ Project:Proyecto:
-
+ Select Project FilenameSelecciona el nombre del proyecto
-
+ No project file loadedNo hay ningún proyecto cargado
-
+ The project file
%1
@@ -1399,22 +1399,22 @@ Options:
ResultsTree
-
+ FileArchivo
-
+ SeveritySeveridad
-
+ LineLínea
-
+ SummaryResumen
@@ -1424,7 +1424,7 @@ Options:
Fichero no definido
-
+ [Inconclusive][No concluyente]
@@ -1444,53 +1444,53 @@ Options:
depuración
-
+ Recheck
-
+ Copy filenameCopiar nombre del archivo
-
+ Copy full pathCopiar ruta completa
-
+ Copy messageCopiar mensaje
-
+ Copy message idCopiar id del mensaje
-
+ HideOcultar
-
+ Hide all with idOcultar todos con el mismo id
-
+ Open containing folderAbrir carpeta contenedora
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1500,7 +1500,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1509,12 +1509,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!¡No se ha encontrado el fichero!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1523,7 +1523,7 @@ Please check the application path and parameters are correct.
Por favor comprueba que la ruta a la aplicación y los parámetros son correctos.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1532,17 +1532,17 @@ Please select the directory where file is located.
Por favor selecciona la carpeta donde se encuentra.
-
+ Select DirectorySelecciona carpeta
-
+ IdId
-
+ Inconclusive
@@ -1575,73 +1575,73 @@ Por favor selecciona la carpeta donde se encuentra.
Resultados
-
+ No errors found, nothing to save.No se han encontrado errores, nada que guardar.
-
-
+
+ Failed to save the report.Error al guardar el informe.
-
+ Print ReportImprimir informe
-
+ No errors found, nothing to print.No se encontraron errores, nada que imprimir.
-
+ %p% (%1 of %2 files checked)%p% (%1 of %2 archivos comprobados)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.No se han encontrado errores.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Se han encontrado errores, pero están configurados para que no se muestren.
Para cambiar el tipo de comportamiento, abra el menú Ver.
-
-
-
+
+
+ Failed to read the report.Error al leer el informe.
-
+ SummaryResumen
-
+ MessageMensaje
-
+ First included by
-
+ IdId
@@ -1702,38 +1702,43 @@ Para cambiar el tipo de comportamiento, abra el menú Ver.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ PathsRutas
-
+ Include paths:Rutas incluidas:
-
-
+
+ Add...Añadir...
-
+ Edit...Editar...
-
+ Set as defaultDefinir por defecto
-
+ LanguageIdioma
@@ -1765,33 +1770,33 @@ Para cambiar el tipo de comportamiento, abra el menú Ver.
Mostrar el mensaje "No se han encontrado errores"
-
+ EditEditar
-
-
+
+ RemoveEliminar
-
+ ApplicationsAplicaciones
-
+ ReportsInformes
-
+ Save all errors when creating reportGuardar todos los errores cuando se cree el informe
-
+ Save full path to files in reportsGuardar la ruta completa en los ficheros de informes
@@ -1799,32 +1804,32 @@ Para cambiar el tipo de comportamiento, abra el menú Ver.
SettingsDialog
-
+ N/AN/A
-
+ Add a new applicationAñadir una nueva aplicación
-
+ Modify an applicationModificar una aplicación
-
+ [Default]
-
+ [Default][Predeterminada]
-
+ Select include directorySeleccionar carpeta a incluir
diff --git a/gui/cppcheck_fi.ts b/gui/cppcheck_fi.ts
index 5af48c50f..59ebcff01 100644
--- a/gui/cppcheck_fi.ts
+++ b/gui/cppcheck_fi.ts
@@ -412,16 +412,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -612,8 +612,8 @@ Parameters: -l(line) (file)
-
-
+
+ Information
@@ -879,222 +879,222 @@ Parameters: -l(line) (file)
&Ohje
-
+ Select directory to checkValitse tarkistettava hakemisto
-
+ No suitable files found to check!Tarkistettavaksi sopivia tiedostoja ei löytynyt!
-
+ Quick Filter:
-
+ Found project file: %1
Do you want to load this project file instead?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseLisenssi
-
+ AuthorsTekijät
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML-tiedostot (*.xml);;Tekstitiedostot (*.txt);;CSV-tiedostot (*.csv)
-
+ Save the report fileTallenna raportti
-
+ XML files (*.xml)XML-tiedostot (*xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
-
+ You must close the project file before selecting new files or directories!
-
+ Select files to checkValitse tarkistettavat tiedostot
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Unsupported format
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report file
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
-
+ XML files version 1 (*.xml)
-
+ XML files version 2 (*.xml)
-
+ Text files (*.txt)Tekstitiedostot (*.txt)
-
+ CSV files (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
-
-
+
+ Project files (*.cppcheck);;All files(*.*)
-
+ Select Project File
-
-
+
+ Project:
-
+ Select Project Filename
-
+ No project file loaded
-
+ The project file
%1
@@ -1386,22 +1386,22 @@ Options:
ResultsTree
-
+ FileTiedosto
-
+ SeverityTyyppi
-
+ LineRivi
-
+ Summary
@@ -1411,7 +1411,7 @@ Options:
Määrittelemätön tiedosto
-
+ [Inconclusive]
@@ -1421,53 +1421,53 @@ Options:
-
+ Recheck
-
+ Copy filenameKopioi tiedostonimi
-
+ Copy full pathKopioi tiedoston koko polku
-
+ Copy message
-
+ Copy message id
-
+ Hide
-
+ Hide all with id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1475,19 +1475,19 @@ Configure the editor application for Cppcheck in preferences/Applications.Voit asetuksista määritellä muita ohjelmia joilla avata tämän virheen sisältävän tiedoston.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
-
+ Could not find the file!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1496,24 +1496,24 @@ Please check the application path and parameters are correct.
Tarkista että ohjelman polku ja parametrit ovat oikeat.
-
+ Could not find file:
%1
Please select the directory where file is located.
-
+ Select Directory
-
+ Id
-
+ Inconclusive
@@ -1551,73 +1551,73 @@ Please select the directory where file is located.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Virheitä ei löytynyt.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Virheitä löytyi, mutta asetuksissa kyseiset virheet on määritelty piilotettavaksi.
Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valikko.
-
-
-
+
+
+ Failed to read the report.
-
+ Summary
-
+ Message
-
+ First included by
-
+ Id
-
+ No errors found, nothing to save.Virheitä ei löytynyt, ei mitään tallennettavaa.
-
-
+
+ Failed to save the report.Raportin tallentaminen epäonnistui.
@@ -1658,13 +1658,13 @@ Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valik
Yleiset
-
+ Include paths:
-
-
+
+ Add...
@@ -1710,58 +1710,63 @@ Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valik
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ Paths
-
+ Edit
-
-
+
+ Remove
-
+ ApplicationsOhjelmat
-
+ Edit...
-
+ Set as default
-
+ ReportsRaportit
-
+ Save all errors when creating reportTallenna kaikki virheet raporttia luodessa
-
+ Save full path to files in reportsTallenna tiedostojen koko polku raportteihin
-
+ Language
@@ -1769,32 +1774,32 @@ Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valik
SettingsDialog
-
+ N/A
-
+ Add a new applicationLisää uusi ohjelma
-
+ Modify an applicationMuokkaa ohjelmaa
-
+ [Default]
-
+ [Default]
-
+ Select include directory
diff --git a/gui/cppcheck_fr.ts b/gui/cppcheck_fr.ts
index f01be8e33..3dbe311d8 100644
--- a/gui/cppcheck_fr.ts
+++ b/gui/cppcheck_fr.ts
@@ -125,7 +125,7 @@ Parameters: -l(line) (file)
Save
-
+ SauvegarderFunctions
@@ -133,7 +133,7 @@ Parameters: -l(line) (file)
Add
-
+ Ajouternoreturn
@@ -165,7 +165,7 @@ Parameters: -l(line) (file)
Edit
-
+ EditerLibrary files (*.cfg)
@@ -596,7 +596,7 @@ Parameters: -l(line) (file)
Show information messages
- Afficher les messages d'information
+ Afficher les messages d'informationPortability
@@ -608,7 +608,7 @@ Parameters: -l(line) (file)
You must close the project file before selecting new files or directories!
- Vous devez d'abord fermer le projet avant de choisir des fichiers/répertoires
+ Vous devez d'abord fermer le projet avant de choisir des fichiers/répertoiresOpen the report file
@@ -740,7 +740,7 @@ Do you want to remove the file from the recently used projects -list?
Opening a new XML file will clear current results.Do you want to proceed?
Les résultats courant seront effacés.
-L'ouverture d'un nouveau fichier XML effacera les resultats. Voulez-vous confirmar l'opération ?
+L'ouverture d'un nouveau fichier XML effacera les resultats. Voulez-vous confirmar l'opération ?
Show S&cratchpad...
@@ -811,7 +811,7 @@ Options:
Bad attribute value
- Mauvaise valeur d'attribut
+ Mauvaise valeur d'attributFailed to load the selected library '%1'.
@@ -847,7 +847,7 @@ Options:
Print Pre&view...
- Apercu d'impression...
+ Apercu d'impression...Open a Print Preview Dialog for the Current Results
@@ -933,7 +933,7 @@ Options:
Could not write the project file.
- Impossible d'écrire dans le fichier projet.
+ Impossible d'écrire dans le fichier projet.
@@ -1080,19 +1080,19 @@ Options:
QPlatformThemeOK
-
+ OKCancel
-
+ AnnulerClose
-
+ FermerSave
-
+ Sauvegarder
@@ -1211,7 +1211,7 @@ Please select the default editor application in preferences/Applications.
Copy message id
- Copier l'identifiant du message
+ Copier l'identifiant du messageHide all with id
@@ -1219,7 +1219,7 @@ Please select the default editor application in preferences/Applications.
Open containing folder
- Ouvrir l'emplacement du fichier
+ Ouvrir l'emplacement du fichierInconclusive
@@ -1284,7 +1284,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
No errors found, nothing to print.
- Aucune erreur trouvée. Il n'y a rien à imprimer
+ Aucune erreur trouvée. Il n'y a rien à imprimerFirst included by
@@ -1390,7 +1390,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Display error Id in column "Id"
- Afficher l'identifiant d'erreur Id dans la colonne "Id"
+ Afficher l'identifiant d'erreur Id dans la colonne "Id"Check for inconclusive errors also
@@ -1400,6 +1400,10 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.Show internal warnings in log
Montrer les avertissements internes dans le journal
+
+ Show statistics on check completion
+
+ SettingsDialog
@@ -1417,7 +1421,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Select include directory
-
+ Selectionner un répertoire à inclure[Default]
@@ -1468,7 +1472,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Scan Duration:
- Durée de l'analyse :
+ Durée de l'analyse :Errors:
@@ -1492,7 +1496,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Information messages:
- Messages d'information :
+ Messages d'information :Copy to Clipboard
@@ -1544,7 +1548,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Paths
-
+ CheminsInclude paths
@@ -1568,15 +1572,15 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Errors
-
+ ErreursWarnings
-
+ AvertissementsStyle warnings
-
+ Avertissement de stylePortability warnings
@@ -1584,7 +1588,7 @@ Pour configurer les erreurs affichées, ouvrez le menu d'affichage.
Performance warnings
-
+ Avertissements de performanceInformation messages
diff --git a/gui/cppcheck_it.ts b/gui/cppcheck_it.ts
index 16e04af1f..c7384f76b 100644
--- a/gui/cppcheck_it.ts
+++ b/gui/cppcheck_it.ts
@@ -421,16 +421,16 @@ Parametri: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -621,8 +621,8 @@ Parametri: -l(line) (file)
-
-
+
+ InformationInformazione
@@ -888,22 +888,22 @@ Parametri: -l(line) (file)
&Aiuto
-
+ Select directory to checkSeleziona una cartella da scansionare
-
+ No suitable files found to check!Nessun file trovato idoneo alla scansione!
-
+ Quick Filter:Rapido filtro:
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -912,7 +912,7 @@ Do you want to load this project file instead?
Vuoi piuttosto caricare questo file di progetto?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -921,68 +921,68 @@ Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Unsupported format
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseLicenza
-
+ AuthorsAutori
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)File XML Versione 2 (*.xml);;File XML Versione 1 (*.xml);;File di testo (*.txt);;File CSV (*.csv)
-
+ Save the report fileSalva il file di rapporto
-
+ XML files (*.xml)File XML (*.xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -991,53 +991,53 @@ This is probably because the settings were changed between the Cppcheck versions
Probabilmente ciò è avvenuto perché le impostazioni sono state modificate tra le versioni di Cppcheck. Per favore controlla (e sistema) le impostazioni delle applicazioni editor, altrimenti il programma editor può non partire correttamente.
-
+ You must close the project file before selecting new files or directories!Devi chiudere il file di progetto prima di selezionare nuovi file o cartelle!
-
+ Select files to checkSeleziona i file da scansionare
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1046,12 +1046,12 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report fileApri il file di rapporto
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1060,27 +1060,27 @@ Do you want to stop the checking and exit Cppcheck?
Vuoi fermare la scansione ed uscire da Cppcheck?
-
+ XML files version 1 (*.xml)Files XML versione 1 (*.xml)
-
+ XML files version 2 (*.xml)Files XML versione 2 (*.xml)
-
+ Text files (*.txt)File di testo (*.txt)
-
+ CSV files (*.csv)Files CSV (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
@@ -1097,34 +1097,34 @@ The user interface language has been reset to English. Open the Preferences-dial
L'interfaccia utente è stata risettata in Inglese. Apri la finestra di dialogo Preferenze per selezionare una qualunque lingua a disposizione.
-
-
+
+ Project files (*.cppcheck);;All files(*.*)Files di progetto (*.cppcheck);;Tutti i files(*.*)
-
+ Select Project FileSeleziona il file di progetto
-
-
+
+ Project:Progetto:
-
+ Select Project FilenameSeleziona il nome del file di progetto
-
+ No project file loadedNessun file di progetto caricato
-
+ The project file
%1
@@ -1424,22 +1424,22 @@ Options:
ResultsTree
-
+ FileFile
-
+ SeveritySeverità
-
+ LineLinea
-
+ SummaryRiassunto
@@ -1449,7 +1449,7 @@ Options:
File indefinito
-
+ [Inconclusive][Inconcludente]
@@ -1459,53 +1459,53 @@ Options:
debug
-
+ Recheck
-
+ Copy filenameCopia nome file
-
+ Copy full pathCopia tutto il percorso
-
+ Copy messageCopia messaggio
-
+ Copy message idCopia id del messaggio
-
+ HideNascondi
-
+ Hide all with id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1514,7 +1514,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1523,12 +1523,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!Non è stato possibile trovare il file!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1537,7 +1537,7 @@ Please check the application path and parameters are correct.
Per favore verifica che il percorso dell'applicazione e i parametri siano corretti.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1546,17 +1546,17 @@ Please select the directory where file is located.
Per favore selezioa la cartella dove il file è posizionato.
-
+ Select DirectorySeleziona Cartella
-
+ IdId
-
+ Inconclusive
@@ -1594,73 +1594,73 @@ Per favore selezioa la cartella dove il file è posizionato.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)%p% (%1 su %2 file scansionati)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Nessun errore trovato.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Sono stati trovati errori, ma sono stati configurati per essere nascosti.
Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza.
-
-
-
+
+
+ Failed to read the report.Apertura del report fallito.
-
+ SummaryRiassunto
-
+ MessageMessaggio
-
+ First included by
-
+ IdId
-
+ No errors found, nothing to save.Nessun errore trovato, nulla da salvare.
-
-
+
+ Failed to save the report.Salvataggio del report fallito.
@@ -1701,13 +1701,13 @@ Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza.Generale
-
+ Include paths:Percorsi d'inclusione:
-
-
+
+ Add...Aggiungi...
@@ -1752,58 +1752,63 @@ Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ PathsPercorsi
-
+ EditModifica
-
-
+
+ RemoveRimuovi
-
+ ApplicationsApplicazioni
-
+ Edit...Modifica...
-
+ Set as defaultImposta come predefinito
-
+ ReportsRapporti
-
+ Save all errors when creating reportSalva tutti gli errori quando viene creato il rapporto
-
+ Save full path to files in reportsSalva tutto il percorso ai files nei rapporti
-
+ LanguageLingua
@@ -1823,32 +1828,32 @@ Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza.
SettingsDialog
-
+ N/AN/A
-
+ Add a new applicationAggiungi una nuova applicazione
-
+ Modify an applicationModifica un'applicazione
-
+ [Default]
-
+ [Default][Predefinito]
-
+ Select include directorySeleziona la cartella da includere
diff --git a/gui/cppcheck_ja.ts b/gui/cppcheck_ja.ts
index 7d6fdd784..ba78da8b9 100644
--- a/gui/cppcheck_ja.ts
+++ b/gui/cppcheck_ja.ts
@@ -430,16 +430,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -624,8 +624,8 @@ Parameters: -l(line) (file)
-
-
+
+ Information情報
@@ -897,7 +897,7 @@ Parameters: -l(line) (file)
ログ表示
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -910,37 +910,37 @@ This is probably because the settings were changed between the Cppcheck versions
-
+ No suitable files found to check!解析可能なファイルではありません
-
+ You must close the project file before selecting new files or directories!新しいファイル/ディレクトリを解析するには現在のプロジェクトを閉じてください
-
+ Select directory to checkチェック対象のディレクトリを選択
-
+ Quick Filter:クイックフィルタ:
-
+ Select files to checkチェック対象のファイルを選択
-
+ C/C++ Source (%1)C/C++ ソース (%1)
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -949,7 +949,7 @@ Do you want to load this project file instead?
現在のプロジェクトの代わりにこのプロジェクトファイルを読み込んでもかまいませんか?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -959,74 +959,74 @@ Do you want to proceed checking without using any of these project files?
-
+ The library '%1' contains unknown elements:
%2このライブラリ '%1' には不明要素が含まれています。
-
+ File not foundファイルがありません
-
+ Bad XML不正なXML
-
+ Missing attribute属性がありません
-
+ Bad attribute value不正な属性があります
-
+ Unsupported formatサポートされていないフォーマット
-
+ Duplicate platform typeプラットフォームの種類が重複しています
-
+ Platform type redefinedプラットフォームの種類が再定義されました
-
+ Unknown element
-
+ Unknown issue
-
+ Failed to load the selected library '%1'.
%2選択したライブラリの読み込みに失敗しました '%1'
-
+ Errorエラー
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.%1の読み込みに失敗しました。CppCheckのインストールに失敗しています。コマンドライン引数に --data-dir=<directory> を指定して、このファイルの場所を指定してください。
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1035,17 +1035,17 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ XML files (*.xml)XML ファイル (*.xml)
-
+ Open the report fileレポートを開く
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1054,80 +1054,80 @@ Do you want to stop the checking and exit Cppcheck?
解析を停止してCppcheckを終了しますか?.
-
+ Licenseライセンス
-
+ Authors作者
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML ファイル (*.xml);;テキストファイル (*.txt);;CSV形式ファイル (*.csv)
-
+ Save the report fileレポートを保存
-
+ XML files version 1 (*.xml)XMLファイルのバージョン1
-
+ XML files version 2 (*.xml)XMLファイルのバージョン2
-
+ Text files (*.txt)テキストファイル (*.txt)
-
+ CSV files (*.csv)CSV形式ファイル (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
-
-
+
+ Project files (*.cppcheck);;All files(*.*)プロジェクトファイル (*.cppcheck);;すべてのファイル(*.*)
-
+ Select Project Fileプロジェクトファイルを選択
-
-
+
+ Project:プロジェクト:
-
+ Select Project Filenameプロジェクトファイル名を選択
-
+ No project file loadedプロジェクトファイルが読み込まれていません
-
+ The project file
%1
@@ -1433,22 +1433,22 @@ Options:
ResultsTree
-
+ Fileファイル
-
+ Severity警告種別
-
+ Line行
-
+ Summary内容
@@ -1458,7 +1458,7 @@ Options:
未定義ファイル
-
+ [Inconclusive][結論の出ない]
@@ -1468,53 +1468,53 @@ Options:
デバッグ
-
+ Recheck
-
+ Copy filenameファイル名をコピー
-
+ Copy full pathフルパスをコピー
-
+ Copy messageメッセージをコピー
-
+ Copy message id
-
+ Hide非表示
-
+ Hide all with idIDを表示しない
-
+ Open containing folder含まれるフォルダを開く
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1522,7 +1522,7 @@ Configure the editor application for Cppcheck in preferences/Applications.メニューの「編集」→「設定」からテキストファイルを表示するアプリケーションを設定してください。
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1532,12 +1532,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!ファイルが見つかりません
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1546,7 +1546,7 @@ Please check the application path and parameters are correct.
実行ファイルパスや引数の設定を確認してください。
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1555,17 +1555,17 @@ Please select the directory where file is located.
ディレクトリにファイルが存在するか確認してください。
-
+ Select Directoryディレクトリを選択
-
+ IdID
-
+ Inconclusive結論のでない
@@ -1608,72 +1608,72 @@ Please select the directory where file is located.
結果
-
+ No errors found, nothing to save.警告/エラーが見つからなかったため、保存しません。
-
-
+
+ Failed to save the report.レポートの保存に失敗しました。
-
+ Print Reportレポートの印刷
-
+ No errors found, nothing to print.指摘がないため、印刷するものがありません。
-
+ %p% (%1 of %2 files checked)%p% (%1 / %2 :ファイル数)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.警告/エラーは見つかりませんでした。
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.警告/エラーが見つかりましたが、非表示設定になっています。
-
-
-
+
+
+ Failed to read the report.レポートの読み込みに失敗.
-
+ Summary内容
-
+ Messageメッセージ
-
+ First included by
-
+ IdID
@@ -1709,13 +1709,13 @@ To toggle what kind of errors are shown, open view menu.
全般
-
+ Include paths:Include ディレクトリ:
-
-
+
+ Add...追加...
@@ -1761,58 +1761,63 @@ To toggle what kind of errors are shown, open view menu.
結論のでない指摘も解析する
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in logログの内部警告も表示する
-
+ Pathsパス
-
+ Edit編集
-
-
+
+ Remove削除
-
+ Applicationsアプリケーション
-
+ Edit...編集...
-
+ Set as defaultデフォルトとして設定
-
+ Reportsレポート
-
+ Save all errors when creating reportすべての警告/エラーを保存
-
+ Save full path to files in reportsファイルのフルパスを保存
-
+ Language言語
@@ -1828,32 +1833,32 @@ To toggle what kind of errors are shown, open view menu.
SettingsDialog
-
+ N/AN/A
-
+ Add a new application新しいアプリケーションの追加
-
+ Modify an applicationアプリケーションの変更
-
+ [Default]
-
+ [Default][デフォルト]
-
+ Select include directoryinclude ディレクトリを選択
diff --git a/gui/cppcheck_ko.ts b/gui/cppcheck_ko.ts
index 8023d5933..b5f5b6571 100644
--- a/gui/cppcheck_ko.ts
+++ b/gui/cppcheck_ko.ts
@@ -1466,6 +1466,10 @@ To toggle what kind of errors are shown, open view menu.
Show internal warnings in log
+
+ Show statistics on check completion
+
+ SettingsDialog
diff --git a/gui/cppcheck_nl.ts b/gui/cppcheck_nl.ts
index 2e57e60f7..1f842ec69 100644
--- a/gui/cppcheck_nl.ts
+++ b/gui/cppcheck_nl.ts
@@ -422,16 +422,16 @@ Parameters: -l(lijn) (bestand)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -622,8 +622,8 @@ Parameters: -l(lijn) (bestand)
-
-
+
+ InformationInformatie
@@ -889,22 +889,22 @@ Parameters: -l(lijn) (bestand)
&Help
-
+ Select directory to checkSelecteer een map om te controleren
-
+ No suitable files found to check!Geen geschikte bestanden gevonden om te controleren!
-
+ Quick Filter:Snel Filter:
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -912,7 +912,7 @@ Do you want to load this project file instead?
Wilt u dit project laden in plaats van?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -920,64 +920,64 @@ Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseLicentie
-
+ AuthorsAuteurs
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML bestanden (*.xml);;Tekst bestanden (*.txt);;CSV bestanden (*.csv)
-
+ Save the report fileRapport opslaan
-
+ XML files (*.xml)XML bestanden (*.xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -986,58 +986,58 @@ This is probably because the settings were changed between the Cppcheck versions
Dit is waarschijnlijk omdat de instellingen zijn gewijzigd tussen de versies van cppcheck. Controleer (en maak) de bewerker instellingen, anders zal de bewerker niet correct starten.
-
+ You must close the project file before selecting new files or directories!Je moet project bestanden sluiten voordat je nieuwe bestanden of mappen selekteerd!
-
+ Select files to checkSelecteer bestanden om te controleren
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Unsupported format
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1046,12 +1046,12 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report fileOpen het rapport bestand
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1060,59 +1060,59 @@ Do you want to stop the checking and exit Cppcheck?
Wil je het controleren stoppen en Cppcheck sluiten?
-
+ XML files version 1 (*.xml)XML files version 1 (*.xml)
-
+ XML files version 2 (*.xml)XML files version 2 (*.xml)
-
+ Text files (*.txt)Tekst bestanden (*.txt)
-
+ CSV files (*.csv)CSV bestanden (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
-
-
+
+ Project files (*.cppcheck);;All files(*.*)Project bestanden (*.cppcheck);;Alle bestanden(*.*)
-
+ Select Project FileSelecteer project bestand
-
-
+
+ Project:Project:
-
+ Select Project FilenameSelecteer project bestandsnaam
-
+ No project file loadedGeen project bestand geladen
-
+ The project file
%1
@@ -1436,22 +1436,22 @@ Options:
ResultsTree
-
+ FileBestand
-
+ SeverityErnst
-
+ LineRegel
-
+ SummaryOverzicht
@@ -1461,7 +1461,7 @@ Options:
Niet gedefinieerd bestand
-
+ [Inconclusive][Onduidelijk]
@@ -1471,53 +1471,53 @@ Options:
-
+ Recheck
-
+ Copy filenameKopier bestandsnaam
-
+ Copy full pathKopieer volledig pad
-
+ Copy messageKopieer bericht
-
+ Copy message idKopieer bericht id
-
+ HideVerberg
-
+ Hide all with idVerberg alles met id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1527,7 +1527,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1535,12 +1535,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!Kon het bestand niet vinden!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1549,7 +1549,7 @@ Please check the application path and parameters are correct.
Gelieve te controleren of de het pad en de parameters correct zijn.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1557,17 +1557,17 @@ Please select the directory where file is located.
Selecteer de map waarin het bestand zich bevindt.
-
+ Select DirectorySelecteer map
-
+ IdId
-
+ Inconclusive
@@ -1605,73 +1605,73 @@ Selecteer de map waarin het bestand zich bevindt.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)%p% (%1 van %2 bestanden gecontroleerd)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Geen fouten gevonden.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Fouten werden gevonden, maar volgens de configuratie zijn deze verborgen.
Gebruik het uitzicht menu om te selecteren welke fouten getoond worden.
-
-
-
+
+
+ Failed to read the report.Kon rapport niet lezen.
-
+ SummaryOverzicht
-
+ MessageBericht
-
+ First included by
-
+ IdId
-
+ No errors found, nothing to save.Geen fouten gevonden; geen data om op te slaan.
-
-
+
+ Failed to save the report.Kon het rapport niet opslaan.
@@ -1712,13 +1712,13 @@ Gebruik het uitzicht menu om te selecteren welke fouten getoond worden.Algemeen
-
+ Include paths:Include paden:
-
-
+
+ Add...Toevoegen...
@@ -1764,58 +1764,63 @@ Gebruik het uitzicht menu om te selecteren welke fouten getoond worden.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ PathsPaden
-
+ EditBewerk
-
-
+
+ RemoveVerwijder
-
+ ApplicationsApplicaties
-
+ Edit...Bewerk...
-
+ Set as defaultInstellen als standaard
-
+ ReportsRapporten
-
+ Save all errors when creating reportAlle fouten opslaan
-
+ Save full path to files in reportsVolledig pad opslaan
-
+ LanguageTaal
@@ -1835,32 +1840,32 @@ Gebruik het uitzicht menu om te selecteren welke fouten getoond worden.
SettingsDialog
-
+ N/A
-
+ Add a new applicationNieuwe applicatie toevoegen
-
+ Modify an applicationApplicatie wijzigen
-
+ [Default]
-
+ [Default][Standaard]
-
+ Select include directorySelecteer include map
diff --git a/gui/cppcheck_ru.ts b/gui/cppcheck_ru.ts
index eba9c026c..79445f672 100644
--- a/gui/cppcheck_ru.ts
+++ b/gui/cppcheck_ru.ts
@@ -422,16 +422,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -622,8 +622,8 @@ Parameters: -l(line) (file)
-
-
+
+ InformationИнформационные сообщения
@@ -889,22 +889,22 @@ Parameters: -l(line) (file)
Помощь
-
+ Select directory to checkВыберите каталог для проверки
-
+ No suitable files found to check!Не найдено подходящих файлов для проверки!
-
+ Quick Filter:Быстрый фильтр:
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -913,7 +913,7 @@ Do you want to load this project file instead?
Вы хотите загрузить этот проект?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -921,69 +921,69 @@ Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Unsupported format
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseЛицензия
-
+ AuthorsАвторы
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML файлы версии 2 (*.xml);;XML файлы версии 1 (*.xml);;Текстовые файлы (*.txt);;CSV файлы (*.csv)
-
+ Save the report fileСохранить файл с отчетом
-
+ XML files (*.xml)XML-файлы (*.xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -992,53 +992,53 @@ This is probably because the settings were changed between the Cppcheck versions
Возможно, это связано с изменениями в версии программы. Пожалуйста, проверьте (и исправьте) настройки приложения.
-
+ You must close the project file before selecting new files or directories!Вы должны закрыть проект перед выбором новых файлов или директорий!
-
+ Select files to checkВыберите файлы для проверки
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1047,12 +1047,12 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report fileОткрыть файл с отчетом
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1061,27 +1061,27 @@ Do you want to stop the checking and exit Cppcheck?
Вы хотите завершить проверку и выйти?
-
+ XML files version 1 (*.xml)XML файлы версии 1 (*.xml)
-
+ XML files version 2 (*.xml)XML файлы версии 2 (*.xml)
-
+ Text files (*.txt)Текстовые файлы (*.txt)
-
+ CSV files (*.csv)CSV файлы(*.csv)
-
+ Cppcheck - %1Cppcheck - %1
@@ -1098,34 +1098,34 @@ The user interface language has been reset to English. Open the Preferences-dial
The user interface language has been reset to English. Open the Preferences-dialog to select any of the available languages.
-
-
+
+ Project files (*.cppcheck);;All files(*.*)Файлы проекта (*.cppcheck);;Все файлы(*.*)
-
+ Select Project FileВыберите файл проекта
-
-
+
+ Project:Проект:
-
+ Select Project FilenameВыберите имя файла для проекта
-
+ No project file loadedФайл с проектом не загружен
-
+ The project file
%1
@@ -1450,22 +1450,22 @@ Options:
ResultsTree
-
+ FileФайл
-
+ SeverityВажность
-
+ LineСтрока
-
+ SummaryКратко
@@ -1475,7 +1475,7 @@ Options:
Неопределенный файл
-
+ [Inconclusive][Неубедительный]
@@ -1485,53 +1485,53 @@ Options:
отлаживать
-
+ Recheck
-
+ Copy filenameСкопировать имя файла
-
+ Copy full pathСкопировать полный путь
-
+ Copy messageСкопировать сообщение
-
+ Copy message idСкопировать номер сообщения
-
+ HideСкрыть
-
+ Hide all with idСкрыть все с id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1540,7 +1540,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1548,12 +1548,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!Не удается найти файл!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1561,7 +1561,7 @@ Please check the application path and parameters are correct.
Пожалуйста, проверьте путь приложения, и верны ли параметры.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1570,17 +1570,17 @@ Please select the directory where file is located.
Пожалуйста, выберите каталог, в котором находится файл.
-
+ Select DirectoryВыберите директорию
-
+ IdId
-
+ Inconclusive
@@ -1618,73 +1618,73 @@ Please select the directory where file is located.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)%p% (%1 из %2 файлов проверено)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Ошибок не найдено.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Были обнаружены ошибки, но они настроены быть скрыты.
Для переключения какие ошибки отображаются, откройте меню представления.
-
-
-
+
+
+ Failed to read the report.Не удалось прочитать отчет.
-
+ SummaryКратко
-
+ MessageСообщение
-
+ First included by
-
+ IdId
-
+ No errors found, nothing to save.Ошибки не найдены, нечего сохранять.
-
-
+
+ Failed to save the report.Не удалось сохранить отчет.
@@ -1725,13 +1725,13 @@ To toggle what kind of errors are shown, open view menu.
Общие
-
+ Include paths:Пути для поиска заголовочных файлов:
-
-
+
+ Add...Добавить...
@@ -1777,58 +1777,63 @@ To toggle what kind of errors are shown, open view menu.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ PathsПути
-
+ EditИзменить
-
-
+
+ RemoveУдалить
-
+ ApplicationsПриложения
-
+ Edit...Изменить...
-
+ Set as defaultУстановить по умолчанию
-
+ ReportsОтчёты
-
+ Save all errors when creating reportСохранять все ошибки при создании отчёта
-
+ Save full path to files in reportsСохранять полные пути к файлам в отчётах
-
+ LanguageЯзык
@@ -1848,32 +1853,32 @@ To toggle what kind of errors are shown, open view menu.
SettingsDialog
-
+ N/AНет данных
-
+ Add a new applicationДобавить новое приложение
-
+ Modify an applicationИзменить приложение
-
+ [Default]
-
+ [Default][По умолчанию]
-
+ Select include directoryВыберите директорию
diff --git a/gui/cppcheck_sr.ts b/gui/cppcheck_sr.ts
index 2cf6d1663..578b44295 100644
--- a/gui/cppcheck_sr.ts
+++ b/gui/cppcheck_sr.ts
@@ -410,16 +410,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -610,8 +610,8 @@ Parameters: -l(line) (file)
-
-
+
+ Information
@@ -881,221 +881,221 @@ Parameters: -l(line) (file)
&Help
-
+ Select directory to checkSelect directory to check
-
+ No suitable files found to check!No suitable files found to check!
-
+ Quick Filter:
-
+ Found project file: %1
Do you want to load this project file instead?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseLicense
-
+ AuthorsAuthors
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)
-
+ Save the report fileSave the report file
-
+ XML files (*.xml)XML files (*.xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
-
+ You must close the project file before selecting new files or directories!
-
+ Select files to checkSelect files to check
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Unsupported format
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report file
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
-
+ XML files version 1 (*.xml)
-
+ XML files version 2 (*.xml)
-
+ Text files (*.txt)Text files (*.txt)
-
+ CSV files (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
-
-
+
+ Project files (*.cppcheck);;All files(*.*)
-
+ Select Project File
-
-
+
+ Project:
-
+ Select Project Filename
-
+ No project file loaded
-
+ The project file
%1
@@ -1385,22 +1385,22 @@ Options:
ResultsTree
-
+ FileFile
-
+ SeveritySeverity
-
+ LineLine
-
+ Summary
@@ -1410,7 +1410,7 @@ Options:
Undefined file
-
+ [Inconclusive]
@@ -1420,72 +1420,72 @@ Options:
-
+ Recheck
-
+ Copy filenameCopy filename
-
+ Copy full pathCopy full path
-
+ Copy message
-
+ Copy message id
-
+ Hide
-
+ Hide all with id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.You can open this error by specifying applications in program's settings.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
-
+ Could not find the file!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1494,24 +1494,24 @@ Please check the application path and parameters are correct.
Please check the application path and parameters are correct.
-
+ Could not find file:
%1
Please select the directory where file is located.
-
+ Select Directory
-
+ Id
-
+ Inconclusive
@@ -1549,73 +1549,73 @@ Please select the directory where file is located.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.No errors found.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.
-
-
-
+
+
+ Failed to read the report.
-
+ Summary
-
+ Message
-
+ First included by
-
+ Id
-
+ No errors found, nothing to save.No errors found, nothing to save.
-
-
+
+ Failed to save the report.Failed to save the report.
@@ -1656,13 +1656,13 @@ To toggle what kind of errors are shown, open view menu.
General
-
+ Include paths:
-
-
+
+ Add...
@@ -1707,58 +1707,63 @@ To toggle what kind of errors are shown, open view menu.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ Paths
-
+ Edit
-
-
+
+ Remove
-
+ ApplicationsApplications
-
+ Edit...
-
+ Set as default
-
+ ReportsReports
-
+ Save all errors when creating reportSave all errors when creating report
-
+ Save full path to files in reportsSave full path to files in reports
-
+ Language
@@ -1766,32 +1771,32 @@ To toggle what kind of errors are shown, open view menu.
SettingsDialog
-
+ N/A
-
+ Add a new applicationAdd a new application
-
+ Modify an applicationModify an application
-
+ [Default]
-
+ [Default]
-
+ Select include directory
diff --git a/gui/cppcheck_sv.ts b/gui/cppcheck_sv.ts
index ac5205a43..9cb292668 100644
--- a/gui/cppcheck_sv.ts
+++ b/gui/cppcheck_sv.ts
@@ -434,16 +434,16 @@ Parametrar: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -634,8 +634,8 @@ Parametrar: -l(line) (file)
-
-
+
+ InformationInformation
@@ -902,22 +902,22 @@ Parametrar: -l(line) (file)
&Hjälp
-
+ Select directory to checkVälj katalog som skall kontrolleras
-
+ No suitable files found to check!Inga lämpliga filer hittades!
-
+ Quick Filter:Snabbfilter:
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -926,7 +926,7 @@ Do you want to load this project file instead?
Vill du ladda denna projektfil istället?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -935,69 +935,69 @@ Do you want to proceed checking without using any of these project files?
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Unsupported format
-
+ Failed to load the selected library '%1'.
%2
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ LicenseLicens
-
+ AuthorsUtvecklare
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML filer version 2 (*.xml);;XML filer version 1 (*.xml);;Text filer (*.txt);;CSV filer (*.csv)
-
+ Save the report fileSpara rapport
-
+ XML files (*.xml)XML filer (*.xml)
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -1006,53 +1006,53 @@ This is probably because the settings were changed between the Cppcheck versions
En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Kontrollera programinställningarna.
-
+ You must close the project file before selecting new files or directories!Du måste stänga projektfilen innan nya filer eller sökvägar kan väljas!
-
+ Select files to checkVälj filer att kontrollera
-
+ C/C++ Source (%1)
-
+ The library '%1' contains unknown elements:
%2
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Error
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1061,12 +1061,12 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ Open the report fileÖppna rapportfilen
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1075,27 +1075,27 @@ Do you want to stop the checking and exit Cppcheck?
Vill du stoppa analysen och avsluta Cppcheck?
-
+ XML files version 1 (*.xml)XML filer version 1 (*.xml)
-
+ XML files version 2 (*.xml)XML filer version 2 (*.xml)
-
+ Text files (*.txt)Text filer (*.txt)
-
+ CSV files (*.csv)CSV filer (*.csv)
-
+ Cppcheck - %1Cppcheck - %1
@@ -1112,34 +1112,34 @@ The user interface language has been reset to English. Open the Preferences-dial
Språket har nollställts till Engelska. Öppna Preferences och välj något av de tillgängliga språken.
-
-
+
+ Project files (*.cppcheck);;All files(*.*)Projektfiler (*.cppcheck);;Alla filer(*.*)
-
+ Select Project FileVälj projektfil
-
-
+
+ Project:Projekt:
-
+ Select Project FilenameVälj Projektfil
-
+ No project file loadedInget projekt laddat
-
+ The project file
%1
@@ -1465,22 +1465,22 @@ Options:
ResultsTree
-
+ FileFil
-
+ SeverityTyp
-
+ LineRad
-
+ SummarySammanfattning
@@ -1490,7 +1490,7 @@ Options:
Odefinierad fil
-
+ [Inconclusive][Inconclusive]
@@ -1500,53 +1500,53 @@ Options:
debug
-
+ Recheck
-
+ Copy filenameKopiera filnamn
-
+ Copy full pathKopiera full sökväg
-
+ Copy messageKopiera meddelande
-
+ Copy message idKopiera meddelande id
-
+ HideDölj
-
+ Hide all with idDölj alla med id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1556,7 +1556,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1565,12 +1565,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!Kunde inte hitta filen!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1579,7 +1579,7 @@ Please check the application path and parameters are correct.
Kontrollera att sökvägen och parametrarna är korrekta.
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1588,17 +1588,17 @@ Please select the directory where file is located.
Välj mappen där filen finns.
-
+ Select DirectoryVälj mapp
-
+ IdId
-
+ Inconclusive
@@ -1636,73 +1636,73 @@ Välj mappen där filen finns.
ResultsView
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)%p% (%1 av %2 filer analyserade)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.Inga fel hittades.
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.Fel hittades, men de visas ej.
För att ställa in vilka fel som skall visas använd visa menyn.
-
-
-
+
+
+ Failed to read the report.Misslyckades att läsa rapporten.
-
+ SummarySammanfattning
-
+ MessageMeddelande
-
+ First included by
-
+ IdId
-
+ No errors found, nothing to save.Inga fel hittades, ingenting att spara.
-
-
+
+ Failed to save the report.Misslyckades med att spara rapporten.
@@ -1743,13 +1743,13 @@ För att ställa in vilka fel som skall visas använd visa menyn.
Allmänt
-
+ Include paths:Include sökvägar:
-
-
+
+ Add...Lägg till...
@@ -1795,58 +1795,63 @@ För att ställa in vilka fel som skall visas använd visa menyn.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ PathsSökvägar
-
+ EditRedigera
-
-
+
+ RemoveTa bort
-
+ ApplicationsProgram
-
+ Edit...Redigera...
-
+ Set as defaultSätt förvald
-
+ ReportsRapporter
-
+ Save all errors when creating reportSpara alla fel
-
+ Save full path to files in reportsSpara fulla sökvägar
-
+ LanguageSpråk
@@ -1866,32 +1871,32 @@ För att ställa in vilka fel som skall visas använd visa menyn.
SettingsDialog
-
+ N/AEj tillgängligt
-
+ Add a new applicationLägg till program
-
+ Modify an applicationÄndra program
-
+ [Default]
-
+ [Default][Förvald]
-
+ Select include directoryVälj include mapp
diff --git a/gui/cppcheck_zh_CN.ts b/gui/cppcheck_zh_CN.ts
index c6fd351a3..039a66383 100644
--- a/gui/cppcheck_zh_CN.ts
+++ b/gui/cppcheck_zh_CN.ts
@@ -419,16 +419,16 @@ Parameters: -l(line) (file)
MainWindow
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+ CppcheckCppcheck
@@ -613,8 +613,8 @@ Parameters: -l(line) (file)
-
-
+
+ Information信息
@@ -886,7 +886,7 @@ Parameters: -l(line) (file)
日志视图
-
+ There was a problem with loading the editor application settings.
This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly.
@@ -895,37 +895,37 @@ This is probably because the settings were changed between the Cppcheck versions
这可能是因为 Cppcheck 不同版本间的设置有所不同。请检查(并修复)编辑器应用程序设置,否则编辑器程序可能不会正确启动。
-
+ No suitable files found to check!未发现适合检查的文件!
-
+ You must close the project file before selecting new files or directories!在选择新的文件或目录之前,你必须先关闭此项目文件!
-
+ Select directory to check选择目录来检查
-
+ Quick Filter:快速滤器:
-
+ Select files to check选择要检查的文件
-
+ C/C++ Source (%1)
-
+ Found project file: %1
Do you want to load this project file instead?
@@ -934,7 +934,7 @@ Do you want to load this project file instead?
你是否想加载该项目文件?
-
+ Found project files from the directory.
Do you want to proceed checking without using any of these project files?
@@ -943,74 +943,74 @@ Do you want to proceed checking without using any of these project files?
-
+ The library '%1' contains unknown elements:
%2
-
+ File not found
-
+ Bad XML
-
+ Missing attribute
-
+ Bad attribute value
-
+ Unsupported format
-
+ Duplicate platform type
-
+ Platform type redefined
-
+ Unknown element
-
+ Unknown issue
-
+ Failed to load the selected library '%1'.
%2
-
+ Error
-
+ Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located.
-
+ Current results will be cleared.
Opening a new XML file will clear current results.Do you want to proceed?
@@ -1019,17 +1019,17 @@ Opening a new XML file will clear current results.Do you want to proceed?
-
+ XML files (*.xml)XML 文件(*.xml)
-
+ Open the report file打开报告文件
-
+ Checking is running.
Do you want to stop the checking and exit Cppcheck?
@@ -1038,48 +1038,48 @@ Do you want to stop the checking and exit Cppcheck?
你是否需要停止检查并退出 Cppcheck?
-
+ License许可证
-
+ Authors作者
-
+ XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv)XML files (*.xml);;Text files (*.txt);;CSV files (*.csv)XML 文件版本 2 (*.xml);;XML 文件版本 1 (*.xml);; 文本文件(*.txt);; CSV 文件(*.csv)
-
+ Save the report file保存报告文件
-
+ XML files version 1 (*.xml)XML 文件版本 1 (*.xml)
-
+ XML files version 2 (*.xml)XML 文件版本 2 (*.xml)
-
+ Text files (*.txt)文本文件(*.txt)
-
+ CSV files (*.csv)CSV 文件(*.csv)
-
+ Cppcheck - %1Cppcheck - %1
@@ -1096,34 +1096,34 @@ The user interface language has been reset to English. Open the Preferences-dial
用户界面语言已被重置为英语。打开“首选项”对话框,选择任何可用的语言。
-
-
+
+ Project files (*.cppcheck);;All files(*.*)项目文件(*.cppcheck);;所有文件(*.*)
-
+ Select Project File选择项目文件
-
-
+
+ Project:项目:
-
+ Select Project Filename选择项目文件名
-
+ No project file loaded项目文件未加载
-
+ The project file
%1
@@ -1423,22 +1423,22 @@ Options:
ResultsTree
-
+ File文件
-
+ Severity严重性
-
+ Line行
-
+ Summary概要
@@ -1448,7 +1448,7 @@ Options:
未定义文件
-
+ [Inconclusive][不确定的]
@@ -1458,53 +1458,53 @@ Options:
调试
-
+ Recheck
-
+ Copy filename复制文件名
-
+ Copy full path复制完整路径
-
+ Copy message复制消息
-
+ Copy message id复制消息 ID
-
+ Hide隐藏
-
+ Hide all with id
-
+ Open containing folder
-
-
+
+ CppcheckCppcheck
-
+ No editor application configured.
Configure the editor application for Cppcheck in preferences/Applications.
@@ -1514,7 +1514,7 @@ Configure the editor application for Cppcheck in preferences/Applications.
-
+ No default editor application selected.
Please select the default editor application in preferences/Applications.
@@ -1523,12 +1523,12 @@ Please select the default editor application in preferences/Applications.
-
+ Could not find the file!找不到文件!
-
+ Could not start %1
Please check the application path and parameters are correct.
@@ -1537,7 +1537,7 @@ Please check the application path and parameters are correct.
请检查此应用程序的路径与参数是否正确。
-
+ Could not find file:
%1
Please select the directory where file is located.
@@ -1546,17 +1546,17 @@ Please select the directory where file is located.
请选择文件所在目录。
-
+ Select Directory选择目录
-
+ IdId
-
+ Inconclusive
@@ -1599,73 +1599,73 @@ Please select the directory where file is located.
结果
-
+ No errors found, nothing to save.未发现错误,没有结果可保存。
-
-
+
+ Failed to save the report.保存报告失败。
-
+ Print Report
-
+ No errors found, nothing to print.
-
+ %p% (%1 of %2 files checked)%p% (%2 个文件已检查 %1 个)
-
-
+
+ CppcheckCppcheck
-
+ No errors found.未发现错误。
-
+ Errors were found, but they are configured to be hidden.
To toggle what kind of errors are shown, open view menu.发现错误,但它们被设为隐藏。
打开“查看”菜单,切换需要显示的错误。
-
-
-
+
+
+ Failed to read the report.读取报告失败。
-
+ Summary概要
-
+ Message消息
-
+ First included by
-
+ IdId
@@ -1701,13 +1701,13 @@ To toggle what kind of errors are shown, open view menu.
常规
-
+ Include paths:Include 路径:
-
-
+
+ Add...添加...
@@ -1753,58 +1753,63 @@ To toggle what kind of errors are shown, open view menu.
-
+
+ Show statistics on check completion
+
+
+
+ Show internal warnings in log
-
+ Paths路径
-
+ Edit编辑
-
-
+
+ Remove移除
-
+ Applications应用程序
-
+ Edit...编辑...
-
+ Set as default设为默认
-
+ Reports报告
-
+ Save all errors when creating report创建报告时,保存所有错误
-
+ Save full path to files in reports在报告中保存文件的完整路径
-
+ Language语言
@@ -1824,32 +1829,32 @@ To toggle what kind of errors are shown, open view menu.
SettingsDialog
-
+ N/AN/A
-
+ Add a new application添加一个新的应用程序
-
+ Modify an application修改一个应用程序
-
+ [Default]
-
+ [Default][默认]
-
+ Select include directory选择包含目录