diff --git a/gui/cppcheck_de.ts b/gui/cppcheck_de.ts index d8e6560fb..0dd82d3cf 100644 --- a/gui/cppcheck_de.ts +++ b/gui/cppcheck_de.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2013 Daniel Marjamäki und das Cppcheck-Team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki und das Cppcheck-Team. @@ -166,16 +166,16 @@ Parameter: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -362,7 +362,7 @@ Parameter: -l(line) (file) - + Information Information @@ -578,22 +578,22 @@ Parameter: -l(line) (file) &Hilfe - + Select directory to check Verzeichnis zum Überprüfen auswählen - + No suitable files found to check! Keine passenden Dateien zum Überprüfen gefunden! - + Quick Filter: Schnellfilter: - + Found project file: %1 Do you want to load this project file instead? @@ -602,7 +602,7 @@ Do you want to load this project file instead? Möchten Sie stattdessen diese öffnen? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -611,32 +611,37 @@ Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + Laden von %1 fehlgeschlagen. Ihre Cppcheck-Installation ist defekt. Sie können --data-dir=<Verzeichnis> als Kommandozeilenparameter verwenden, um anzugeben, wo die Datei sich befindet. + + + License Lizenz - + Authors Autoren - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML-Dateien Version 2 (*.xml);;XML-Dateien Version 1 (*.xml);;Textdateien (*.txt);;CSV-Dateien (*.csv) - + Save the report file Speichert die Berichtdatei - + XML files (*.xml) XML-Dateien (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -645,32 +650,27 @@ This is probably because the settings were changed between the Cppcheck versions Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bitte prüfen (und korrigieren) Sie die Einstellungen, andernfalls könnte die Editor-Anwendung nicht korrekt starten. - + You must close the project file before selecting new files or directories! Sie müssen die Projektdatei schließen, bevor Sie neue Dateien oder Verzeichnisse auswählen! - + Select files to check Dateien zum Überprüfen auswählen - + Failed to load the selected library %1 Laden der ausgewählten Bibliothek %1 schlug fehl - + Error Fehler - - Failed to load %1. Your Cppcheck installation is broken. - Laden von %1 schlug fehl. Ihre Cppcheck-Installtion ist defekt. - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -679,12 +679,12 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Berichtdatei öffnen - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -693,59 +693,59 @@ Do you want to stop the checking and exit Cppcheck?. Möchten Sie die Prüfung abbrechen und Cppcheck beenden? - + XML files version 1 (*.xml) XML-Dateien Version 1 (*.xml) - + XML files version 2 (*.xml) XML-Dateien Version 2 (*.xml) - + Text files (*.txt) Textdateien (*.txt) - + CSV files (*.csv) CSV-Dateien (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Projektdateien (*.cppcheck);;Alle Dateien(*.*) - + Select Project File Projektdatei auswählen - - + + Project: Projekt: - + Select Project Filename Projektnamen auswählen - + No project file loaded Keine Projektdatei geladen - + The project file %1 @@ -762,97 +762,101 @@ Do you want to remove the file from the recently used projects -list? Möchten Sie die Datei von der Liste der zuletzt benutzten Projekte entfernen? - + Finnish Finnisch - + English Englisch - + Chinese (Simplified) Chinesisch (vereinfacht) - + Dutch Niederländisch - + French Französisch - + Italian Italienisch - + Korean Koreanisch - + Spanish Spanisch - + Swedish Schwedisch - + German Deutsch - + Russian Russisch - + Japanese Japanisch - + Serbian Serbisch - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version - Cppcheck-GUI + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + Cppcheck GUI. -Syntax: - cppcheck-gui [OPTIONEN] [Dateien oder Pfade] + Syntax: + cppcheck-gui [OPTIONEN] [Dateien oder Pfade] -Optionen: - -h, --help Gibt diese Hilfeinformationen aus - -p <Datei> Öffnet das angegebene Projekt und startet die Prüfung - -l <Datei> Öffnet die angegenbene XML-Resultatdatei - -d <Verzeichnis> Spezifiziert das Verzeichnis, dass überprüft wurde, als die mit -l angegebene Datei erstellt wurde - -v, --version Zeigt die Programmversion + Options: + -h, --help Gibt diese Hilfeinformationen aus + -p <file> Öffnet das angegebene Projekt und beginnt die Prüfung + -l <file> Öffnet die angegebene XML-Ergebnisdatei + -d <directory> Gibt das Verzeichnis an, das geprüft wurde, um das unter -l angegebene XML-Ergebnis zu erzeugen + -v, --version Zeigt Programmversion an + --data-dir=<directory> Gibt das Verzeichnis an, unter dem sich die Konfigurationsdateien für die GUI (Übersetzungen, Cfg) befinden + - + Cppcheck GUI - Command line parameters Cppcheck GUI - Kommandozeilenparameter @@ -1013,27 +1017,27 @@ Optionen: Projektdatei: %1 - + Select include directory Wähle Include-Verzeichnisse - + Select a directory to check Wähle zu prüfendes Verzeichnis - + Select directory to ignore Wähle zu ignorierendes Verzeichnis - + Add Suppression Fehlerunterdrückung hinzufügen - + Select error id suppress: Wähle Fehler-ID zum Unterdrücken: @@ -1041,22 +1045,22 @@ Optionen: QDialogButtonBox - + OK OK - + Cancel Abbrechen - + Close Schließen - + Save Speichern @@ -1064,17 +1068,17 @@ Optionen: QObject - + Unknown language specified! Unbekannte Sprache angegeben! - + Language file %1 not found! Sprachdatei %1 nicht gefunden! - + Failed to load translation for language %1 from file %2 Die Übersetzungen der Sprache %1 konnten nicht aus der Datei %2 geladen werden @@ -1688,7 +1692,7 @@ Legen Sie unter dem Menü Ansicht fest, welche Arten von Fehlern angezeigt werde TranslationHandler - + Failed to change the user interface language: %1 @@ -1701,7 +1705,7 @@ The user interface language has been reset to English. Open the Preferences-dial Die Sprache wurde auf Englisch zurückgesetzt. Öffnen Sie den Einstellungen-Dialog um eine verfügbare Sprache auszuwählen. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_es.ts b/gui/cppcheck_es.ts index 47e765e3a..97201d4ee 100644 --- a/gui/cppcheck_es.ts +++ b/gui/cppcheck_es.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. Copyright © 2007-2010 Daniel Marjamäki y el equipo de cppcheck. @@ -155,16 +155,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -345,7 +345,7 @@ Parameters: -l(line) (file) - + Information Información @@ -567,39 +567,44 @@ Parameters: -l(line) (file) Mostrar &ocultas - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + No suitable files found to check! ¡No se han encontrado ficheros para comprobar! - + You must close the project file before selecting new files or directories! ¡Tienes que cerrar el fichero de proyecto antes de seleccionar nuevos ficheros o carpetas! - + Select directory to check Selecciona una carpeta para comprobar - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + XML files (*.xml) Ficheros XML(*.xml) - + Open the report file Abrir informe - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -608,37 +613,37 @@ Do you want to stop the checking and exit Cppcheck?. ¿Quieres parar la comprobación y salir del Cppcheck?. - + License Licencia - + Authors Autores - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Save the report file Guardar informe - + Quick Filter: Filtro rápido: - + Select files to check Selecciona ficheros para comprobar - + Found project file: %1 Do you want to load this project file instead? @@ -647,7 +652,7 @@ Do you want to load this project file instead? Quiere cargar dicho fichero de proyecto? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -656,22 +661,17 @@ Do you want to proceed checking without using any of these project files? - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -680,59 +680,59 @@ Opening a new XML file will clear current results.Do you want to proceed? - + XML files version 1 (*.xml) - + XML files version 2 (*.xml) - + Text files (*.txt) Ficheros de texto (*.txt) - + CSV files (*.csv) Ficheros CVS (*.cvs) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Ficheros de proyecto (*.cppcheck;;Todos los ficheros (*.*) - + Select Project File Selecciona proyecto - - + + Project: Proyecto: - + Select Project Filename Selecciona el nombre del proyecto - + No project file loaded No hay ningún proyecto cargado - + The project file %1 @@ -743,87 +743,88 @@ Do you want to remove the file from the recently used projects -list? - + English English - + Dutch Holandés - + Chinese (Simplified) - + Finnish Finés - + French - + Italian - + Korean - + Spanish - + Swedish Sueco - + German Alemán - + Russian Ruso - + Japanese Japonés - + Serbian Servio - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -984,27 +985,27 @@ Options: Fichero de proyecto: %1 - + Select include directory Selecciona una carpeta para incluir - + Select a directory to check - + Select directory to ignore - + Add Suppression - + Select error id suppress: @@ -1012,22 +1013,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close Cerrar - + Save Guardar @@ -1035,17 +1036,17 @@ Options: QObject - + Unknown language specified! - + Language file %1 not found! ¡Fichero de idioma %1 no encontrado! - + Failed to load translation for language %1 from file %2 Fallo al cargar la traducción para el idioma %1 desde el fichero %2 @@ -1656,7 +1657,7 @@ Para cambiar el tipo de comportamiento, abrir el menú vista. TranslationHandler - + Failed to change the user interface language: %1 @@ -1669,7 +1670,7 @@ The user interface language has been reset to English. Open the Preferences-dial El idioma de la interfaz grafica ha sido cambiado a Inglés. Abra la ventana de Preferencias para seleccionar alguno de los idiomas disponibles. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_fi.ts b/gui/cppcheck_fi.ts index ef81a8a74..ff3a4dc98 100644 --- a/gui/cppcheck_fi.ts +++ b/gui/cppcheck_fi.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. Copyright (C) 2007-2009 Daniel Marjamäki ja cppcheck tiimi. @@ -158,16 +158,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -354,7 +354,7 @@ Parameters: -l(line) (file) - + Information @@ -570,165 +570,165 @@ Parameters: -l(line) (file) &Ohje - + Select directory to check Valitse tarkistettava hakemisto - + No suitable files found to check! Tarkistettavaksi sopivia tiedostoja ei löytynyt! - + Quick Filter: - + Found project file: %1 Do you want to load this project file instead? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License Lisenssi - + Authors Tekijät - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML-tiedostot (*.xml);;Tekstitiedostot (*.txt);;CSV-tiedostot (*.csv) - + Save the report file Tallenna raportti - + XML files (*.xml) XML-tiedostot (*xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! - + Select files to check Valitse tarkistettavat tiedostot - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file - + Checking is running. Do you want to stop the checking and exit Cppcheck?. - + XML files version 1 (*.xml) - + XML files version 2 (*.xml) - + Text files (*.txt) Tekstitiedostot (*.txt) - + CSV files (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - + + Project: - + Select Project Filename - + No project file loaded - + The project file %1 @@ -739,88 +739,89 @@ Do you want to remove the file from the recently used projects -list? - + Finnish Suomi - + English Englanti - + Chinese (Simplified) - + Dutch - + French - + Italian - + Korean - + Spanish - + Swedish Ruotsi - + German Saksa - + Russian Venäjä - + Japanese Japanease - + Serbian - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -981,27 +982,27 @@ Options: - + Select include directory - + Select a directory to check - + Select directory to ignore - + Add Suppression - + Select error id suppress: @@ -1009,22 +1010,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close - + Save @@ -1032,18 +1033,18 @@ Options: QObject - + Unknown language specified! - + Language file %1 not found! Language file %1.qm not found! Käännöstiedostoa %1 ei löytynyt! - + Failed to load translation for language %1 from file %2 Failed to load translation for language %1 from file %2.qm Käänöksen lataaminen kielelle %1 tiedostosta %2 epäonnistui @@ -1654,7 +1655,7 @@ Määrittääksesi minkä tyyppisiä virheitä näytetään, avaa näkymä valik TranslationHandler - + Failed to change the user interface language: %1 @@ -1663,7 +1664,7 @@ The user interface language has been reset to English. Open the Preferences-dial - + Cppcheck Cppcheck diff --git a/gui/cppcheck_fr.ts b/gui/cppcheck_fr.ts index 681a49d87..4b8861e01 100644 --- a/gui/cppcheck_fr.ts +++ b/gui/cppcheck_fr.ts @@ -26,7 +26,7 @@ General Public License version 3 Visitez le site Cppcheck : %1 - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. @@ -599,20 +599,6 @@ Opening a new XML file will clear current results.Do you want to proceed?Select files to check Sélectionner les fichiers à vérifier - - Cppcheck GUI. - -Syntax: - cppcheck-gui [OPTIONS] [files or paths] - -Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version - - Cppcheck GUI - Command line parameters @@ -646,7 +632,22 @@ Options: - Failed to load %1. Your Cppcheck installation is broken. + Cppcheck GUI. + +Syntax: + cppcheck-gui [OPTIONS] [files or paths] + +Options: + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. diff --git a/gui/cppcheck_it.ts b/gui/cppcheck_it.ts index 1e6b06ba4..969c72655 100644 --- a/gui/cppcheck_it.ts +++ b/gui/cppcheck_it.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. Copyright (C) 2007-2012 Daniel Marjamäki ed il team Cppcheck. @@ -167,16 +167,16 @@ Parametri: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -363,7 +363,7 @@ Parametri: -l(line) (file) - + Information Informazione @@ -579,22 +579,22 @@ Parametri: -l(line) (file) &Aiuto - + Select directory to check Seleziona una cartella da scansionare - + No suitable files found to check! Nessun file trovato idoneo alla scansione! - + Quick Filter: Rapido filtro: - + Found project file: %1 Do you want to load this project file instead? @@ -603,7 +603,7 @@ Do you want to load this project file instead? Vuoi piuttosto caricare questo file di progetto? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -612,32 +612,37 @@ Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License Licenza - + Authors Autori - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) File XML Versione 2 (*.xml);;File XML Versione 1 (*.xml);;File di testo (*.txt);;File CSV (*.csv) - + Save the report file Salva il file di rapporto - + XML files (*.xml) File XML (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -646,32 +651,27 @@ This is probably because the settings were changed between the Cppcheck versions Probabilmente ciò è avvenuto perché le impostazioni sono state modificate tra le versioni di Cppcheck. Per favore controlla (e sistema) le impostazioni delle applicazioni editor, altrimenti il programma editor può non partire correttamente. - + You must close the project file before selecting new files or directories! Devi chiudere il file di progetto prima di selezionare nuovi file o cartelle! - + Select files to check Seleziona i file da scansionare - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -680,12 +680,12 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Apri il file di rapporto - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -694,27 +694,27 @@ Do you want to stop the checking and exit Cppcheck?. Vuoi fermare la scansione ed uscire da Cppcheck? - + XML files version 1 (*.xml) Files XML versione 1 (*.xml) - + XML files version 2 (*.xml) Files XML versione 2 (*.xml) - + Text files (*.txt) File di testo (*.txt) - + CSV files (*.csv) Files CSV (*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -731,34 +731,34 @@ The user interface language has been reset to English. Open the Preferences-dial L'interfaccia utente è stata risettata in Inglese. Apri la finestra di dialogo Preferenze per selezionare una qualunque lingua a disposizione. - - + + Project files (*.cppcheck);;All files(*.*) Files di progetto (*.cppcheck);;Tutti i files(*.*) - + Select Project File Seleziona il file di progetto - - + + Project: Progetto: - + Select Project Filename Seleziona il nome del file di progetto - + No project file loaded Nessun file di progetto caricato - + The project file %1 @@ -775,87 +775,88 @@ Do you want to remove the file from the recently used projects -list? Vuoi rimuovere il file dalla lista dei progetti recentemente usati? - + Finnish Finnish - + English English - + Chinese (Simplified) - + Dutch Dutch - + French French - + Italian Italian - + Korean Korean - + Spanish Spanish - + Swedish Swedish - + German German - + Russian Russian - + Japanese Japanese - + Serbian Serbian - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -1016,27 +1017,27 @@ Options: File di progetto: %1 - + Select include directory Seleziona la cartella da includere - + Select a directory to check Seleziona una cartella da scansionare - + Select directory to ignore Seleziona la cartella da ignorare - + Add Suppression - + Select error id suppress: @@ -1044,22 +1045,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close Chiudi - + Save @@ -1067,17 +1068,17 @@ Options: QObject - + Unknown language specified! Lingua specificata sconosciuta! - + Language file %1 not found! Il file di lingua %1 non trovato! - + Failed to load translation for language %1 from file %2 Fallito il tentativo di aprire la traduzione per la lingua %1 dal file %2 @@ -1691,7 +1692,7 @@ Per vedere il tipo di errori che sono mostrati, apri il menu Visualizza. TranslationHandler - + Failed to change the user interface language: %1 @@ -1704,7 +1705,7 @@ The user interface language has been reset to English. Open the Preferences-dial L'interfaccia utente è stata risettata in Inglese. Apri la finestra di dialogo Preferenze per selezionare una qualunque lingua a disposizione. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_ja.ts b/gui/cppcheck_ja.ts index 152571661..b0390a369 100644 --- a/gui/cppcheck_ja.ts +++ b/gui/cppcheck_ja.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. @@ -155,16 +155,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -345,7 +345,7 @@ Parameters: -l(line) (file) - + Information 情報 @@ -567,85 +567,85 @@ Parameters: -l(line) (file) ログ表示 - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + No suitable files found to check! 解析可能なファイルではありません - + You must close the project file before selecting new files or directories! 新しいファイル／ディレクトリを解析するには現在のプロジェクトを閉じてください - + Select directory to check チェック対象のディレクトリを選択 - + Quick Filter: クイックフィルタ： - + Select files to check チェック対象のファイルを選択 - + Found project file: %1 Do you want to load this project file instead? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? - + XML files (*.xml) XML ファイル (*.xml) - + Open the report file レポートを開く - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -654,80 +654,80 @@ Do you want to stop the checking and exit Cppcheck?. 解析を停止してCppcheckを終了しますか？. - + License ライセンス - + Authors 作者 - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML ファイル (*.xml);;テキストファイル (*.txt);;CSV形式ファイル (*.csv) - + Save the report file レポートを保存 - + XML files version 1 (*.xml) XMLファイルのバージョン1 - + XML files version 2 (*.xml) XMLファイルのバージョン2 - + Text files (*.txt) テキストファイル (*.txt) - + CSV files (*.csv) CSV形式ファイル (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) プロジェクトファイル (*.cppcheck);;すべてのファイル(*.*) - + Select Project File プロジェクトファイルを選択 - - + + Project: プロジェクト: - + Select Project Filename プロジェクトファイル名を選択 - + No project file loaded プロジェクトファイルが読み込まれていません - + The project file %1 @@ -738,88 +738,89 @@ Do you want to remove the file from the recently used projects -list? - + English 英語 - + Dutch オランダ語 - + Chinese (Simplified) - + Finnish フィンランド語 - + French フランス語 - + Italian - + Korean - + Spanish スペイン語 - + Swedish スウェーデン語 - + German ドイツ語 - + Russian ロシア語 - + Japanese Japanease 日本語 - + Serbian セルビア語 - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -980,27 +981,27 @@ Options: プロジェクトファイル:%1 - + Select include directory includeディレクトリを選択 - + Select a directory to check - + Select directory to ignore - + Add Suppression - + Select error id suppress: @@ -1008,22 +1009,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close 閉じる - + Save @@ -1031,17 +1032,17 @@ Options: QObject - + Unknown language specified! 指定された未知の言語 - + Language file %1 not found! 言語ファイル %1 が見つかりません! - + Failed to load translation for language %1 from file %2 @@ -1652,7 +1653,7 @@ To toggle what kind of errors are shown, open view menu. TranslationHandler - + Failed to change the user interface language: %1 @@ -1661,7 +1662,7 @@ The user interface language has been reset to English. Open the Preferences-dial - + Cppcheck Cppcheck diff --git a/gui/cppcheck_ko.ts b/gui/cppcheck_ko.ts index 06649010e..d5b5ec80b 100644 --- a/gui/cppcheck_ko.ts +++ b/gui/cppcheck_ko.ts @@ -31,7 +31,11 @@ of the GNU General Public License version 3 Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. {2007-2013 ?} + Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. {2007-2013 ?} + + + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. {2007-2013 ?} {2007-2014 ?} @@ -643,20 +647,6 @@ Opening a new XML file will clear current results.Do you want to proceed?Select files to check 검사할 파일 선택 - - Cppcheck GUI. - -Syntax: - cppcheck-gui [OPTIONS] [files or paths] - -Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version - - Cppcheck GUI - Command line parameters @@ -690,7 +680,22 @@ Options: - Failed to load %1. Your Cppcheck installation is broken. + Cppcheck GUI. + +Syntax: + cppcheck-gui [OPTIONS] [files or paths] + +Options: + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. diff --git a/gui/cppcheck_nl.ts b/gui/cppcheck_nl.ts index dd92dc362..f5d3467f8 100644 --- a/gui/cppcheck_nl.ts +++ b/gui/cppcheck_nl.ts @@ -20,9 +20,9 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. - Copyright (C) 2007-2009 Daniel Marjamäki en het cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright (C) 2007-2009 Daniel Marjamäki en het cppcheck team. @@ -168,16 +168,16 @@ Parameters: -l(lijn) (bestand) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -364,7 +364,7 @@ Parameters: -l(lijn) (bestand) - + Information Informatie @@ -580,22 +580,22 @@ Parameters: -l(lijn) (bestand) &Help - + Select directory to check Selecteer een map om te controleren - + No suitable files found to check! Geen geschikte bestanden gevonden om te controleren! - + Quick Filter: Snel Filter: - + Found project file: %1 Do you want to load this project file instead? @@ -603,7 +603,7 @@ Do you want to load this project file instead? Wilt u dit project laden in plaats van? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -611,33 +611,38 @@ Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License Licentie - + Authors Auteurs - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML bestanden (*.xml);;Tekst bestanden (*.txt);;CSV bestanden (*.csv) - + Save the report file Rapport opslaan - + XML files (*.xml) XML bestanden (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -646,32 +651,27 @@ This is probably because the settings were changed between the Cppcheck versions Dit is waarschijnlijk omdat de instellingen zijn gewijzigd tussen de versies van cppcheck. Controleer (en maak) de bewerker instellingen, anders zal de bewerker niet correct starten. - + You must close the project file before selecting new files or directories! Je moet project bestanden sluiten voordat je nieuwe bestanden of mappen selekteerd! - + Select files to check Selecteer bestanden om te controleren - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -680,12 +680,12 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Open het rapport bestand - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -694,59 +694,59 @@ Do you want to stop the checking and exit Cppcheck?. Wil je het controleren stoppen en Cppcheck sluiten?. - + XML files version 1 (*.xml) XML files version 1 (*.xml) - + XML files version 2 (*.xml) XML files version 2 (*.xml) - + Text files (*.txt) Tekst bestanden (*.txt) - + CSV files (*.csv) CSV bestanden (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Project bestanden (*.cppcheck);;Alle bestanden(*.*) - + Select Project File Selecteer project bestand - - + + Project: Project: - + Select Project Filename Selecteer project bestandsnaam - + No project file loaded Geen project bestand geladen - + The project file %1 @@ -762,73 +762,72 @@ Kan niet worden gevonden! Wilt u het bestand van de onlangs gebruikte project verwijderen -lijst? - + Finnish Fins - + English Engels - + Chinese (Simplified) Chinees (Vereenvoudigd) - + Dutch Nederlands - + French Frans - + Italian Italiaans - + Korean Koreaans - + Spanish Spaans - + Swedish Zweeds - + German Duits - + Russian Russisch - + Japanese Japanease Japans - + Serbian Servisch - Cppcheck GUI. Syntax: @@ -840,7 +839,7 @@ Options: -l <file> Open given results xml file -d <directory> Specify the directory that was checked to generate the results xml specified with -l -v, --version Show program version - Cppcheck GUI. + Cppcheck GUI. Syntax: ....cppcheck-gui [Opies] [bestanden of paden] @@ -852,7 +851,23 @@ Opties: .....-v,.--versie Toon versie van programma - + + Cppcheck GUI. + +Syntax: + cppcheck-gui [OPTIONS] [files or paths] + +Options: + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + + + Cppcheck GUI - Command line parameters Cppcheck GUI - Command lijn parameters @@ -1013,27 +1028,27 @@ Opties: Project Bestand %1 - + Select include directory Selecteer include map - + Select a directory to check Selecteer een map om te controleren - + Select directory to ignore Selecteer een map om te negeren - + Add Suppression - + Select error id suppress: @@ -1041,22 +1056,22 @@ Opties: QDialogButtonBox - + OK - + Cancel Annuleer - + Close Sluit - + Save Opslaan @@ -1064,18 +1079,18 @@ Opties: QObject - + Unknown language specified! Onbekende taal gekozen! - + Language file %1 not found! Language file %1.qm not found! Kon het taalbestand niet vinden: %1! - + Failed to load translation for language %1 from file %2 Failed to load translation for language %1 from file %2.qm Kon de vertaling voor taal %1 in bestand %2 niet laden @@ -1690,7 +1705,7 @@ Gebruik het uitzicht menu om te selecteren welke fouten getoond worden. TranslationHandler - + Failed to change the user interface language: %1 @@ -1703,7 +1718,7 @@ The user interface language has been reset to English. Open the Preferences-dial De gebruikerstaal is gereset naar Engels. Open het dialoogvenster om een van de beschikbare talen te selecteren. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_ru.ts b/gui/cppcheck_ru.ts index 3d7d861d0..5ef2a0cd0 100644 --- a/gui/cppcheck_ru.ts +++ b/gui/cppcheck_ru.ts @@ -20,9 +20,9 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. @@ -168,16 +168,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -364,7 +364,7 @@ Parameters: -l(line) (file) - + Information Информационные сообщения @@ -580,22 +580,22 @@ Parameters: -l(line) (file) Помощь - + Select directory to check Выберите каталог для проверки - + No suitable files found to check! Не найдено подходящих файлов для проверки! - + Quick Filter: Быстрый фильтр: - + Found project file: %1 Do you want to load this project file instead? @@ -604,7 +604,7 @@ Do you want to load this project file instead? Вы хотите загрузить этот проект? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -612,33 +612,38 @@ Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License Лицензия - + Authors Авторы - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML файлы версии 2 (*.xml);;XML файлы версии 1 (*.xml);;Текстовые файлы (*.txt);;CSV файлы (*.csv) - + Save the report file Сохранить файл с отчетом - + XML files (*.xml) XML-файлы (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -647,32 +652,27 @@ This is probably because the settings were changed between the Cppcheck versions Возможно, это связано с изменениями в версии программы. Пожалуйста, проверьте (и исправьте) настройки приложения. - + You must close the project file before selecting new files or directories! Вы должны закрыть проект перед выбором новых файлов или директорий! - + Select files to check Выберите файлы для проверки - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -681,12 +681,12 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Открыть файл с отчетом - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -695,27 +695,27 @@ Do you want to stop the checking and exit Cppcheck?. Вы хотите завершить проверку и выйти? - + XML files version 1 (*.xml) XML файлы версии 1 (*.xml) - + XML files version 2 (*.xml) XML файлы версии 2 (*.xml) - + Text files (*.txt) Текстовые файлы (*.txt) - + CSV files (*.csv) CSV файлы(*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -732,34 +732,34 @@ The user interface language has been reset to English. Open the Preferences-dial The user interface language has been reset to English. Open the Preferences-dialog to select any of the available languages. - - + + Project files (*.cppcheck);;All files(*.*) Файлы проекта (*.cppcheck);;Все файлы(*.*) - + Select Project File Выберите файл проекта - - + + Project: Проект: - + Select Project Filename Выберите имя файла для проекта - + No project file loaded Файл с проектом не загружен - + The project file %1 @@ -775,73 +775,72 @@ Do you want to remove the file from the recently used projects -list? Хотите удалить его из списка проектов? - + Finnish Финский - + English Английский - + Chinese (Simplified) Китайский (упрощенный) - + Dutch Голландский - + French Французский - + Italian Итальянский - + Korean Корейский - + Spanish Испанский - + Swedish Шведский - + German Немецкий - + Russian Русский - + Japanese Japanease Японский - + Serbian Сербский - Cppcheck GUI. Syntax: @@ -853,7 +852,7 @@ Options: -l <file> Open given results xml file -d <directory> Specify the directory that was checked to generate the results xml specified with -l -v, --version Show program version - Cppcheck Графический Интерфейс Пользователя . + Cppcheck Графический Интерфейс Пользователя . Синтаксис: cppcheck-gui [ОПЦИИ] [файлы или пути] @@ -866,7 +865,23 @@ Options: -v, --version Показать версию программы - + + Cppcheck GUI. + +Syntax: + cppcheck-gui [OPTIONS] [files or paths] + +Options: + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + + + Cppcheck GUI - Command line parameters Cppcheck GUI - параметры Командной строки @@ -1027,27 +1042,27 @@ Options: Файл проекта: %1 - + Select include directory Выберите директорию для поиска заголовочных файлов - + Select a directory to check Выберите директорию для проверки - + Select directory to ignore Выберите директорию, которую надо проигнорировать - + Add Suppression - + Select error id suppress: @@ -1055,22 +1070,22 @@ Options: QDialogButtonBox - + OK OK - + Cancel Отмена - + Close Закрыть - + Save Сохранить @@ -1078,18 +1093,18 @@ Options: QObject - + Unknown language specified! Неизвестный язык! - + Language file %1 not found! Language file %1.qm not found! Языковой файл %1 не найден! - + Failed to load translation for language %1 from file %2 Failed to load translation for language %1 from file %2.qm Ошибка загрузки переводов для языка %1 из файла %2 @@ -1703,7 +1718,7 @@ To toggle what kind of errors are shown, open view menu. TranslationHandler - + Failed to change the user interface language: %1 @@ -1716,7 +1731,7 @@ The user interface language has been reset to English. Open the Preferences-dial Язык пользовательского интерфейса был сброшен на английский. Откройте Настройки-диалог для выбора любой из доступных языков. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_sr.ts b/gui/cppcheck_sr.ts index e70a5865c..9cb998edf 100644 --- a/gui/cppcheck_sr.ts +++ b/gui/cppcheck_sr.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. Copyright (C) 2007-2009 Daniel Marjamäki and cppcheck team. @@ -156,16 +156,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -352,7 +352,7 @@ Parameters: -l(line) (file) - + Information @@ -572,164 +572,164 @@ Parameters: -l(line) (file) &Help - + Select directory to check Select directory to check - + No suitable files found to check! No suitable files found to check! - + Quick Filter: - + Found project file: %1 Do you want to load this project file instead? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License License - + Authors Authors - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Save the report file Save the report file - + XML files (*.xml) XML files (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. - + You must close the project file before selecting new files or directories! - + Select files to check Select files to check - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file - + Checking is running. Do you want to stop the checking and exit Cppcheck?. - + XML files version 1 (*.xml) - + XML files version 2 (*.xml) - + Text files (*.txt) Text files (*.txt) - + CSV files (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - + + Project: - + Select Project Filename - + No project file loaded - + The project file %1 @@ -740,87 +740,88 @@ Do you want to remove the file from the recently used projects -list? - + Finnish Finski - + English Engleski - + Chinese (Simplified) Kineski (Pojednostavljeni) - + Dutch Holandski - + French Francuski - + Italian Italijanski - + Korean Korejski - + Spanish Španski - + Swedish Švedski - + German Nemački - + Russian Ruski - + Japanese Japanski - + Serbian Srpski - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -981,27 +982,27 @@ Options: - + Select include directory - + Select a directory to check - + Select directory to ignore - + Add Suppression - + Select error id suppress: @@ -1009,22 +1010,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close - + Save @@ -1032,17 +1033,17 @@ Options: QObject - + Unknown language specified! - + Language file %1 not found! Could not find the file: %1! - + Failed to load translation for language %1 from file %2 Failed to load translation for language %1 from file %2 @@ -1650,7 +1651,7 @@ To toggle what kind of errors are shown, open view menu. TranslationHandler - + Failed to change the user interface language: %1 @@ -1659,7 +1660,7 @@ The user interface language has been reset to English. Open the Preferences-dial - + Cppcheck Cppcheck diff --git a/gui/cppcheck_sv.ts b/gui/cppcheck_sv.ts index c21e17ff6..384049020 100644 --- a/gui/cppcheck_sv.ts +++ b/gui/cppcheck_sv.ts @@ -20,9 +20,9 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. - Copyright (C) 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. + Copyright (C) 2007-2013 Daniel Marjamäki and cppcheck team. @@ -180,16 +180,16 @@ Parametrar: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -376,7 +376,7 @@ Parametrar: -l(line) (file) - + Information Information @@ -593,22 +593,22 @@ Parametrar: -l(line) (file) &Hjälp - + Select directory to check Välj katalog som skall kontrolleras - + No suitable files found to check! Inga lämpliga filer hittades! - + Quick Filter: Snabbfilter: - + Found project file: %1 Do you want to load this project file instead? @@ -617,7 +617,7 @@ Do you want to load this project file instead? Vill du ladda denna projektfil istället? - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -626,33 +626,38 @@ Do you want to proceed checking without using any of these project files? - + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. + + + + License Licens - + Authors Utvecklare - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML filer version 2 (*.xml);;XML filer version 1 (*.xml);;Text filer (*.txt);;CSV filer (*.csv) - + Save the report file Spara rapport - + XML files (*.xml) XML filer (*.xml) - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -661,32 +666,27 @@ This is probably because the settings were changed between the Cppcheck versions En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Kontrollera programinställningarna. - + You must close the project file before selecting new files or directories! Du måste stänga projektfilen innan nya filer eller sökvägar kan väljas! - + Select files to check Välj filer att kontrollera - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. - - - - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -695,12 +695,12 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Öppna rapportfilen - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -709,27 +709,27 @@ Do you want to stop the checking and exit Cppcheck?. Vill du stoppa analysen och avsluta Cppcheck? - + XML files version 1 (*.xml) XML filer version 1 (*.xml) - + XML files version 2 (*.xml) XML filer version 2 (*.xml) - + Text files (*.txt) Text filer (*.txt) - + CSV files (*.csv) CSV filer (*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -746,34 +746,34 @@ The user interface language has been reset to English. Open the Preferences-dial Språket har nollställts till Engelska. Öppna Preferences och välj något av de tillgängliga språken. - - + + Project files (*.cppcheck);;All files(*.*) Projektfiler (*.cppcheck);;Alla filer(*.*) - + Select Project File Välj projektfil - - + + Project: Projekt: - + Select Project Filename Välj Projektfil - + No project file loaded Inget projekt laddat - + The project file %1 @@ -790,73 +790,72 @@ Do you want to remove the file from the recently used projects -list? Vill du ta bort filen från 'senast använda projekt'-listan? - + Finnish Finska - + English Engelska - + Chinese (Simplified) Kinesiska (Förenklad) - + Dutch Nederländska - + French Franska - + Italian Italienska - + Korean Koreanska - + Spanish Spanska - + Swedish Svenska - + German Tyska - + Russian Ryska - + Japanese Japanease Japanska - + Serbian Serbiska - Cppcheck GUI. Syntax: @@ -868,7 +867,7 @@ Options: -l <file> Open given results xml file -d <directory> Specify the directory that was checked to generate the results xml specified with -l -v, --version Show program version - Cppcheck GUI. + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] @@ -881,7 +880,23 @@ Options: -v, --version Show program version - + + Cppcheck GUI. + +Syntax: + cppcheck-gui [OPTIONS] [files or paths] + +Options: + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) + + + + Cppcheck GUI - Command line parameters Cppcheck GUI - Command line parameters @@ -1042,27 +1057,27 @@ Options: Projektfil: %1 - + Select include directory Välj include sökväg - + Select a directory to check Välj mapp att analysera - + Select directory to ignore Välj sökväg att ignorera - + Add Suppression - + Select error id suppress: @@ -1070,22 +1085,22 @@ Options: QDialogButtonBox - + OK OK - + Cancel Avbryt - + Close Stäng - + Save Spara @@ -1093,18 +1108,18 @@ Options: QObject - + Unknown language specified! Okänt språk valt! - + Language file %1 not found! Language file %1.qm not found! Språk filen %1 hittades ej! - + Failed to load translation for language %1 from file %2 Failed to load translation for language %1 from file %2.qm Misslyckades med att ladda översättningen för %1 från filen %2 @@ -1721,7 +1736,7 @@ För att ställa in vilka fel som skall visas använd visa menyn. TranslationHandler - + Failed to change the user interface language: %1 @@ -1734,7 +1749,7 @@ The user interface language has been reset to English. Open the Preferences-dial Språket har nollställts till Engelska. Öppna Preferences och välj något av de tillgängliga språken. - + Cppcheck Cppcheck diff --git a/gui/cppcheck_zh_CN.ts b/gui/cppcheck_zh_CN.ts index bef4f4c00..41279756b 100644 --- a/gui/cppcheck_zh_CN.ts +++ b/gui/cppcheck_zh_CN.ts @@ -20,8 +20,8 @@ - Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. - Copyright © 2007-2012 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2014 Daniel Marjamäki and cppcheck team. + Copyright © 2007-2013 Daniel Marjamäki and cppcheck team. 版权所有 © 2007-2012 Daniel Marjamäki 与 Cppcheck 团队。 @@ -165,16 +165,16 @@ Parameters: -l(line) (file) MainWindow - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -355,7 +355,7 @@ Parameters: -l(line) (file) - + Information 信息 @@ -577,7 +577,7 @@ Parameters: -l(line) (file) 日志视图 - + There was a problem with loading the editor application settings. This is probably because the settings were changed between the Cppcheck versions. Please check (and fix) the editor application settings, otherwise the editor program might not start correctly. @@ -586,32 +586,32 @@ This is probably because the settings were changed between the Cppcheck versions 这可能是因为 Cppcheck 不同版本间的设置有所不同。请检查(并修复)编辑器应用程序设置，否则编辑器程序可能不会正确启动。 - + No suitable files found to check! 未发现适合检查的文件！ - + You must close the project file before selecting new files or directories! 在选择新的文件或目录之前，你必须先关闭此项目文件！ - + Select directory to check 选择目录来检查 - + Quick Filter: 快速滤器: - + Select files to check 选择要检查的文件 - + Found project file: %1 Do you want to load this project file instead? @@ -620,7 +620,7 @@ Do you want to load this project file instead? 你是否想加载该项目文件？ - + Found project files from the directory. Do you want to proceed checking without using any of these project files? @@ -629,22 +629,22 @@ Do you want to proceed checking without using any of these project files? - + Failed to load the selected library %1 - + Error - - Failed to load %1. Your Cppcheck installation is broken. + + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -653,17 +653,17 @@ Opening a new XML file will clear current results.Do you want to proceed? - + XML files (*.xml) XML 文件(*.xml) - + Open the report file 打开报告文件 - + Checking is running. Do you want to stop the checking and exit Cppcheck?. @@ -672,48 +672,48 @@ Do you want to stop the checking and exit Cppcheck?. 你是否需要停止检查并退出 Cppcheck？ - + License 许可证 - + Authors 作者 - + XML files version 2 (*.xml);;XML files version 1 (*.xml);;Text files (*.txt);;CSV files (*.csv) XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML 文件版本 2 (*.xml);;XML 文件版本 1 (*.xml);; 文本文件(*.txt);; CSV 文件(*.csv) - + Save the report file 保存报告文件 - + XML files version 1 (*.xml) XML 文件版本 1 (*.xml) - + XML files version 2 (*.xml) XML 文件版本 2 (*.xml) - + Text files (*.txt) 文本文件(*.txt) - + CSV files (*.csv) CSV 文件(*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -730,34 +730,34 @@ The user interface language has been reset to English. Open the Preferences-dial 用户界面语言已被重置为英语。打开“首选项”对话框，选择任何可用的语言。 - - + + Project files (*.cppcheck);;All files(*.*) 项目文件(*.cppcheck);;所有文件(*.*) - + Select Project File 选择项目文件 - - + + Project: 项目: - + Select Project Filename 选择项目文件名 - + No project file loaded 项目文件未加载 - + The project file %1 @@ -774,88 +774,89 @@ Do you want to remove the file from the recently used projects -list? 你要从最近使用的项目列表中删除此文件吗？ - + English 英語 - + Dutch 荷兰语 - + Chinese (Simplified) - + Finnish 芬兰语 - + French 法语 - + Italian 意大利语 - + Korean 韩文 - + Spanish 西班牙语 - + Swedish 瑞典语 - + German 德语 - + Russian 俄语 - + Japanese Japanease 日语 - + Serbian 塞尔维亚语 - + Cppcheck GUI. Syntax: cppcheck-gui [OPTIONS] [files or paths] Options: - -h, --help Print this help - -p <file> Open given project file and start checking it - -l <file> Open given results xml file - -d <directory> Specify the directory that was checked to generate the results xml specified with -l - -v, --version Show program version + -h, --help Print this help + -p <file> Open given project file and start checking it + -l <file> Open given results xml file + -d <directory> Specify the directory that was checked to generate the results xml specified with -l + -v, --version Show program version + --data-dir=<directory> Specify directory where GUI datafiles are located (translations, cfg) - + Cppcheck GUI - Command line parameters @@ -1016,27 +1017,27 @@ Options: 项目文件: %1 - + Select include directory 选择 Include 目录 - + Select a directory to check 选择一个检查目录 - + Select directory to ignore 选择忽略的目录 - + Add Suppression - + Select error id suppress: @@ -1044,22 +1045,22 @@ Options: QDialogButtonBox - + OK - + Cancel - + Close 关闭 - + Save @@ -1067,17 +1068,17 @@ Options: QObject - + Unknown language specified! 指定了未知语言！ - + Language file %1 not found! 语言文件 %1 不存在！ - + Failed to load translation for language %1 from file %2 无法从文件 %2 中为语言 %1 加载翻译文件 @@ -1693,7 +1694,7 @@ To toggle what kind of errors are shown, open view menu. TranslationHandler - + Failed to change the user interface language: %1 @@ -1706,7 +1707,7 @@ The user interface language has been reset to English. Open the Preferences-dial 用户界面语言已被重置为英语。打开“首选项”对话框，选择任何可用的语言。 - + Cppcheck Cppcheck diff --git a/lib/checkio.cpp b/lib/checkio.cpp index 6c59d8381..341985b94 100644 --- a/lib/checkio.cpp +++ b/lib/checkio.cpp @@ -182,7 +182,7 @@ void CheckIO::checkFileUsage() operation = Filepointer::OPEN; } else if ((tok->str() == "rewind" || tok->str() == "fseek" || tok->str() == "fsetpos" || tok->str() == "fflush") || (windows && tok->str() == "_fseeki64")) { - if (Token::simpleMatch(tok, "fflush ( stdin )") && !_settings->standards.posix) + if (Token::simpleMatch(tok, "fflush ( stdin )")) fflushOnInputStreamError(tok, tok->strAt(2)); else { fileTok = tok->tokAt(2);