diff --git a/gui/cppcheck_de.ts b/gui/cppcheck_de.ts index bcbd24897..5295a8ecf 100644 --- a/gui/cppcheck_de.ts +++ b/gui/cppcheck_de.ts @@ -431,16 +431,16 @@ Parameter: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -622,8 +622,8 @@ Parameter: -l(line) (file) - - + + Information Information @@ -894,14 +894,12 @@ Parameter: -l(line) (file) &Hilfe - Select directory to check - Verzeichnis zum Überprüfen auswählen + Verzeichnis zum Überprüfen auswählen - No suitable files found to check! - Keine passenden Dateien zum Überprüfen gefunden! + Keine passenden Dateien zum Überprüfen gefunden! @@ -909,22 +907,21 @@ Parameter: -l(line) (file) Schnellfilter: - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) C/C++-Sourcecode, Compile-Datenbank, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration Konfiguration wählen - Select the configuration that will be checked - Wählen Sie die Konfiguration, die geprüft werden soll + Wählen Sie die Konfiguration, die geprüft werden soll - + Found project file: %1 Do you want to load this project file instead? @@ -933,69 +930,68 @@ Do you want to load this project file instead? Möchten Sie stattdessen diese öffnen? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Projektdatei im Verzeichnis gefunden. + Projektdatei im Verzeichnis gefunden. Möchten Sie die Prüfung wirklich durchführen, ohne eine Projektdatei zu verwenden? - + File not found Datei nicht gefunden - + Bad XML Fehlerhaftes XML - + Missing attribute Fehlendes Attribut - + Bad attribute value Falscher Attributwert - + Duplicate platform type Plattformtyp doppelt - + Platform type redefined Plattformtyp neu definiert - + Failed to load the selected library '%1'. %2 Laden der ausgewählten Bibliothek '%1' schlug fehl. %2 - + License Lizenz - + Authors Autoren - + Save the report file Speichert die Berichtdatei - - + + XML files (*.xml) XML-Dateien (*.xml) @@ -1009,49 +1005,48 @@ This is probably because the settings were changed between the Cppcheck versions Dies wurde vermutlich durch einen Wechsel der Cppcheck-Version hervorgerufen. Bitte prüfen (und korrigieren) Sie die Einstellungen, andernfalls könnte die Editor-Anwendung nicht korrekt starten. - + You must close the project file before selecting new files or directories! Sie müssen die Projektdatei schließen, bevor Sie neue Dateien oder Verzeichnisse auswählen! - Select files to check - Dateien zum Überprüfen auswählen + Dateien zum Überprüfen auswählen - + The library '%1' contains unknown elements: %2 Die Bibliothek '%1' enthält unbekannte Elemente: %2 - + Unsupported format Nicht unterstütztes Format - + Unknown element Unbekanntes Element - + Unknown issue Unbekannter Fehler - + Error Fehler - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Laden von %1 fehlgeschlagen. Ihre Cppcheck-Installation ist defekt. Sie können --data-dir=<Verzeichnis> als Kommandozeilenparameter verwenden, um anzugeben, wo die Datei sich befindet. Bitte beachten Sie, dass --data-dir in Installationsroutinen genutzt werden soll, und die GUI bei dessen Nutzung nicht startet, sondern die Einstellungen konfiguriert. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1060,74 +1055,107 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Berichtdatei öffnen - Checking is running. Do you want to stop the checking and exit Cppcheck? - Prüfung läuft. + Prüfung läuft. Möchten Sie die Prüfung abbrechen und Cppcheck beenden? - + Text files (*.txt) Textdateien (*.txt) - + CSV files (*.csv) CSV-Dateien (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Projektdateien (*.cppcheck);;Alle Dateien(*.*) - + Select Project File Projektdatei auswählen - - + + Project: Projekt: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) XML-Dateien (*.xml);;Textdateien (*.txt);;CSV-Dateien (*.csv) - + Build dir '%1' does not exist, create it? Erstellungsverzeichnis '%1' existiert nicht. Erstellen? - + Select Project Filename Projektnamen auswählen - + No project file loaded Keine Projektdatei geladen - + The project file %1 diff --git a/gui/cppcheck_es.ts b/gui/cppcheck_es.ts index dd224374f..0a58aaed5 100644 --- a/gui/cppcheck_es.ts +++ b/gui/cppcheck_es.ts @@ -409,16 +409,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -606,8 +606,8 @@ Parameters: -l(line) (file) - - + + Information Información @@ -892,93 +892,85 @@ This is probably because the settings were changed between the Cppcheck versions - No suitable files found to check! - ¡No se han encontrado ficheros para comprobar! + ¡No se han encontrado ficheros para comprobar! - + You must close the project file before selecting new files or directories! ¡Tienes que cerrar el proyecto antes de seleccionar nuevos ficheros o carpetas! - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - Select directory to check - Selecciona una carpeta para comprobar + Selecciona una carpeta para comprobar - + Select configuration - - Select the configuration that will be checked - - - - + File not found Archivo no encontrado - + Bad XML XML malformado - + Missing attribute Falta el atributo - + Bad attribute value - + Unsupported format Formato no soportado - + Failed to load the selected library '%1'. %2 - - + + XML files (*.xml) Archivos XML (*.xml) - + Open the report file Abrir informe - Checking is running. Do you want to stop the checking and exit Cppcheck? - El proceso de comprobación está en curso. + El proceso de comprobación está en curso. ¿Quieres parar la comprobación y salir del Cppcheck? - + License Licencia - + Authors Autores @@ -987,7 +979,7 @@ Do you want to stop the checking and exit Cppcheck? Archivos XML versión 2 (*.xml);;Archivos XML versión 1 (*.xml);;Archivos de texto (*.txt);;Archivos CSV (*.csv) - + Save the report file Guardar informe @@ -997,12 +989,11 @@ Do you want to stop the checking and exit Cppcheck? Filtro rápido: - Select files to check - Selecciona los archivos a comprobar + Selecciona los archivos a comprobar - + Found project file: %1 Do you want to load this project file instead? @@ -1011,53 +1002,52 @@ Do you want to load this project file instead? ¿Quiere cargar este fichero de proyecto en su lugar? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Se encontraron ficheros de proyecto en el directorio. + Se encontraron ficheros de proyecto en el directorio. ¿Quiere proceder a comprobar sin utilizar ninguno de estos ficheros de proyecto? - + The library '%1' contains unknown elements: %2 La biblioteca '%1' contiene elementos deconocidos: %2 - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1074,60 +1064,94 @@ Abrir un nuevo fichero XML eliminará los resultados actuales. ¿Desea continuar Archivos XML versión 2 (*.xml) - + Text files (*.txt) Ficheros de texto (*.txt) - + CSV files (*.csv) Ficheros CVS (*.cvs) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Ficheros de proyecto (*.cppcheck;;Todos los ficheros (*.*) - + Select Project File Selecciona el archivo de proyecto - - + + Project: Proyecto: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename Selecciona el nombre del proyecto - + No project file loaded No hay ningún proyecto cargado - + The project file %1 diff --git a/gui/cppcheck_fi.ts b/gui/cppcheck_fi.ts index 94c8e0704..0bac4f7fa 100644 --- a/gui/cppcheck_fi.ts +++ b/gui/cppcheck_fi.ts @@ -412,16 +412,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -615,8 +615,8 @@ Parameters: -l(line) (file) - - + + Information @@ -888,14 +888,12 @@ Parameters: -l(line) (file) &Ohje - Select directory to check - Valitse tarkistettava hakemisto + Valitse tarkistettava hakemisto - No suitable files found to check! - Tarkistettavaksi sopivia tiedostoja ei löytynyt! + Tarkistettavaksi sopivia tiedostoja ei löytynyt! @@ -903,67 +901,55 @@ Parameters: -l(line) (file) - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? - - Found project files from the directory. - -Do you want to proceed checking without using any of these project files? - - - - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Failed to load the selected library '%1'. %2 - + License Lisenssi - + Authors Tekijät @@ -973,13 +959,13 @@ Do you want to proceed checking without using any of these project files?XML-tiedostot (*.xml);;Tekstitiedostot (*.txt);;CSV-tiedostot (*.csv) - + Save the report file Tallenna raportti - - + + XML files (*.xml) XML-tiedostot (*xml) @@ -991,130 +977,156 @@ This is probably because the settings were changed between the Cppcheck versions - + You must close the project file before selecting new files or directories! - Select files to check - Valitse tarkistettavat tiedostot + Valitse tarkistettavat tiedostot - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file - - Checking is running. - -Do you want to stop the checking and exit Cppcheck? - - - - + Text files (*.txt) Tekstitiedostot (*.txt) - + CSV files (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - + + Project: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename - + No project file loaded - + The project file %1 diff --git a/gui/cppcheck_fr.ts b/gui/cppcheck_fr.ts index f85b2024e..ce8cbece1 100644 --- a/gui/cppcheck_fr.ts +++ b/gui/cppcheck_fr.ts @@ -448,11 +448,11 @@ Parameters: -l(line) (file) No suitable files found to check! - Pas de fichiers trouvés à vérifier ! + Pas de fichiers trouvés à vérifier ! Select directory to check - Sélectionner le répertoire à vérifier + Sélectionner le répertoire à vérifier License @@ -618,7 +618,7 @@ Parameters: -l(line) (file) Checking is running. Do you want to stop the checking and exit Cppcheck? - Vérification en cours. + Vérification en cours. Voulez-vous arrêter la vérification et quitter CppCheck ? @@ -662,12 +662,6 @@ This is probably because the settings were changed between the Cppcheck versions Do you want to load this project file instead? - - Found project files from the directory. - -Do you want to proceed checking without using any of these project files? - - Project: Projet : @@ -736,7 +730,7 @@ L'ouverture d'un nouveau fichier XML effacera les resultats. Voulez-vo Select files to check - Sélectionner les fichiers à vérifier + Sélectionner les fichiers à vérifier Cppcheck GUI - Command line parameters @@ -866,10 +860,6 @@ L'ouverture d'un nouveau fichier XML effacera les resultats. Voulez-vo Select configuration - - Select the configuration that will be checked - - Cppcheck GUI. @@ -923,6 +913,34 @@ Options: XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) + + No suitable files found to analyze! + + + + Select files to analyze + + + + Select directory to analyze + + + + Select the configuration that will be analyzed + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + Platforms diff --git a/gui/cppcheck_it.ts b/gui/cppcheck_it.ts index 54eed6607..dcae8fe73 100644 --- a/gui/cppcheck_it.ts +++ b/gui/cppcheck_it.ts @@ -421,16 +421,16 @@ Parametri: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -624,8 +624,8 @@ Parametri: -l(line) (file) - - + + Information Informazione @@ -897,14 +897,12 @@ Parametri: -l(line) (file) &Aiuto - Select directory to check - Seleziona una cartella da scansionare + Seleziona una cartella da scansionare - No suitable files found to check! - Nessun file trovato idoneo alla scansione! + Nessun file trovato idoneo alla scansione! @@ -912,22 +910,17 @@ Parametri: -l(line) (file) Rapido filtro: - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? @@ -936,52 +929,51 @@ Do you want to load this project file instead? Vuoi piuttosto caricare questo file di progetto? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Trovati file di progetto dalla directory. + Trovati file di progetto dalla directory. Vuoi procedere alla scansione senza usare qualcuno di questi file di progetto? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Unsupported format - + Failed to load the selected library '%1'. %2 - + License Licenza - + Authors Autori @@ -990,13 +982,13 @@ Vuoi procedere alla scansione senza usare qualcuno di questi file di progetto?File XML Versione 2 (*.xml);;File XML Versione 1 (*.xml);;File di testo (*.txt);;File CSV (*.csv) - + Save the report file Salva il file di rapporto - - + + XML files (*.xml) File XML (*.xml) @@ -1010,53 +1002,52 @@ This is probably because the settings were changed between the Cppcheck versions Probabilmente ciò è avvenuto perché le impostazioni sono state modificate tra le versioni di Cppcheck. Per favore controlla (e sistema) le impostazioni delle applicazioni editor, altrimenti il programma editor può non partire correttamente. - + You must close the project file before selecting new files or directories! Devi chiudere il file di progetto prima di selezionare nuovi file o cartelle! - Select files to check - Seleziona i file da scansionare + Seleziona i file da scansionare - + The library '%1' contains unknown elements: %2 - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1065,16 +1056,15 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Apri il file di rapporto - Checking is running. Do you want to stop the checking and exit Cppcheck? - La scansione è in esecuzione. + La scansione è in esecuzione. Vuoi fermare la scansione ed uscire da Cppcheck? @@ -1087,17 +1077,17 @@ Vuoi fermare la scansione ed uscire da Cppcheck? Files XML versione 2 (*.xml) - + Text files (*.txt) File di testo (*.txt) - + CSV files (*.csv) Files CSV (*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -1114,45 +1104,79 @@ The user interface language has been reset to English. Open the Preferences-dial L'interfaccia utente è stata risettata in Inglese. Apri la finestra di dialogo Preferenze per selezionare una qualunque lingua a disposizione. - - + + Project files (*.cppcheck);;All files(*.*) Files di progetto (*.cppcheck);;Tutti i files(*.*) - + Select Project File Seleziona il file di progetto - - + + Project: Progetto: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename Seleziona il nome del file di progetto - + No project file loaded Nessun file di progetto caricato - + The project file %1 diff --git a/gui/cppcheck_ja.ts b/gui/cppcheck_ja.ts index 5bfeaa7ac..38fb94543 100644 --- a/gui/cppcheck_ja.ts +++ b/gui/cppcheck_ja.ts @@ -430,16 +430,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -627,8 +627,8 @@ Parameters: -l(line) (file) - - + + Information 情報 @@ -919,24 +919,22 @@ This is probably because the settings were changed between the Cppcheck versions - No suitable files found to check! - 解析可能なファイルではありません + 解析可能なファイルではありません - + You must close the project file before selecting new files or directories! 新しいファイル／ディレクトリを解析するには現在のプロジェクトを閉じてください - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - Select directory to check - チェック対象のディレクトリを選択 + チェック対象のディレクトリを選択 @@ -944,26 +942,20 @@ This is probably because the settings were changed between the Cppcheck versions クイックフィルタ： - Select files to check - チェック対象のファイルを選択 + チェック対象のファイルを選択 C/C++ Source (%1) C/C++ ソース (%1) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? @@ -972,74 +964,73 @@ Do you want to load this project file instead? 現在のプロジェクトの代わりにこのプロジェクトファイルを読み込んでもかまいませんか？ - Found project files from the directory. Do you want to proceed checking without using any of these project files? - ディレクトリからプロジェクトファイルが検出されました。 + ディレクトリからプロジェクトファイルが検出されました。 これらのプロジェクトファイルを使用せずに解析を進めてもかまいませんか？ - + The library '%1' contains unknown elements: %2 このライブラリ '%1' には不明要素が含まれています。 - + File not found ファイルがありません - + Bad XML 不正なXML - + Missing attribute 属性がありません - + Bad attribute value 不正な属性があります - + Unsupported format サポートされていないフォーマット - + Duplicate platform type プラットフォームの種類が重複しています - + Platform type redefined プラットフォームの種類が再定義されました - + Unknown element - + Unknown issue - + Failed to load the selected library '%1'. %2 選択したライブラリの読み込みに失敗しました '%1' - + Error エラー @@ -1048,12 +1039,12 @@ Do you want to proceed checking without using any of these project files?%1の読み込みに失敗しました。CppCheckのインストールに失敗しています。コマンドライン引数に --data-dir=<directory> を指定して、このファイルの場所を指定してください。 - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1062,32 +1053,31 @@ Opening a new XML file will clear current results.Do you want to proceed? - - + + XML files (*.xml) XML ファイル (*.xml) - + Open the report file レポートを開く - Checking is running. Do you want to stop the checking and exit Cppcheck? - 解析中です. + 解析中です. 解析を停止してCppcheckを終了しますか？. - + License ライセンス - + Authors 作者 @@ -1097,7 +1087,7 @@ Do you want to stop the checking and exit Cppcheck? XML ファイル (*.xml);;テキストファイル (*.txt);;CSV形式ファイル (*.csv) - + Save the report file レポートを保存 @@ -1110,60 +1100,94 @@ Do you want to stop the checking and exit Cppcheck? XMLファイルのバージョン2 - + Text files (*.txt) テキストファイル (*.txt) - + CSV files (*.csv) CSV形式ファイル (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) プロジェクトファイル (*.cppcheck);;すべてのファイル(*.*) - + Select Project File プロジェクトファイルを選択 - - + + Project: プロジェクト: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename プロジェクトファイル名を選択 - + No project file loaded プロジェクトファイルが読み込まれていません - + The project file %1 diff --git a/gui/cppcheck_ko.ts b/gui/cppcheck_ko.ts index ea1a76e84..adfe26fbd 100644 --- a/gui/cppcheck_ko.ts +++ b/gui/cppcheck_ko.ts @@ -650,7 +650,7 @@ Cppcheck 버전간 설정 방법 차이때문인 것으로 보입니다. 편집 No suitable files found to check! - 검사할 수 있는 파일이 없습니다! + 검사할 수 있는 파일이 없습니다! You must close the project file before selecting new files or directories! @@ -658,7 +658,7 @@ Cppcheck 버전간 설정 방법 차이때문인 것으로 보입니다. 편집 Select directory to check - 검사할 디렉토리 선택 + 검사할 디렉토리 선택 Found project file: %1 @@ -672,7 +672,7 @@ Do you want to load this project file instead? Found project files from the directory. Do you want to proceed checking without using any of these project files? - 디렉토리에 프로젝트 파일 존재. + 디렉토리에 프로젝트 파일 존재. 이 프로젝트 파일을 사용하지 않고 검사를 계속하시겠습니까? @@ -688,7 +688,7 @@ Do you want to proceed checking without using any of these project files?Checking is running. Do you want to stop the checking and exit Cppcheck? - 검사 중. + 검사 중. 검사를 중지하고 Cppcheck을 종료하시겠습니까? @@ -788,7 +788,7 @@ Opening a new XML file will clear current results.Do you want to proceed? Select files to check - 검사할 파일 선택 + 검사할 파일 선택 Cppcheck GUI - Command line parameters @@ -908,10 +908,6 @@ Opening a new XML file will clear current results.Do you want to proceed?Select configuration - - Select the configuration that will be checked - - Cppcheck GUI. @@ -965,6 +961,34 @@ Options: XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) + + No suitable files found to analyze! + + + + Select files to analyze + + + + Select directory to analyze + + + + Select the configuration that will be analyzed + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + Platforms diff --git a/gui/cppcheck_nl.ts b/gui/cppcheck_nl.ts index 0436864c1..b0824e900 100644 --- a/gui/cppcheck_nl.ts +++ b/gui/cppcheck_nl.ts @@ -422,16 +422,16 @@ Parameters: -l(lijn) (bestand) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -625,8 +625,8 @@ Parameters: -l(lijn) (bestand) - - + + Information Informatie @@ -898,14 +898,12 @@ Parameters: -l(lijn) (bestand) &Help - Select directory to check - Selecteer een map om te controleren + Selecteer een map om te controleren - No suitable files found to check! - Geen geschikte bestanden gevonden om te controleren! + Geen geschikte bestanden gevonden om te controleren! @@ -913,22 +911,17 @@ Parameters: -l(lijn) (bestand) Snel Filter: - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? @@ -936,46 +929,45 @@ Do you want to load this project file instead? Wilt u dit project laden in plaats van? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Project bestanden gevonden in de map. + Project bestanden gevonden in de map. Wil je verder wilt gaan zonder controle van deze project bestanden? - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Failed to load the selected library '%1'. %2 - + License Licentie - + Authors Auteurs @@ -985,13 +977,13 @@ Wil je verder wilt gaan zonder controle van deze project bestanden?XML bestanden (*.xml);;Tekst bestanden (*.txt);;CSV bestanden (*.csv) - + Save the report file Rapport opslaan - - + + XML files (*.xml) XML bestanden (*.xml) @@ -1005,58 +997,57 @@ This is probably because the settings were changed between the Cppcheck versions Dit is waarschijnlijk omdat de instellingen zijn gewijzigd tussen de versies van cppcheck. Controleer (en maak) de bewerker instellingen, anders zal de bewerker niet correct starten. - + You must close the project file before selecting new files or directories! Je moet project bestanden sluiten voordat je nieuwe bestanden of mappen selekteerd! - Select files to check - Selecteer bestanden om te controleren + Selecteer bestanden om te controleren - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1065,16 +1056,15 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Open het rapport bestand - Checking is running. Do you want to stop the checking and exit Cppcheck? - Het controleren loopt. + Het controleren loopt. Wil je het controleren stoppen en Cppcheck sluiten? @@ -1087,60 +1077,94 @@ Wil je het controleren stoppen en Cppcheck sluiten? XML files version 2 (*.xml) - + Text files (*.txt) Tekst bestanden (*.txt) - + CSV files (*.csv) CSV bestanden (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) Project bestanden (*.cppcheck);;Alle bestanden(*.*) - + Select Project File Selecteer project bestand - - + + Project: Project: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename Selecteer project bestandsnaam - + No project file loaded Geen project bestand geladen - + The project file %1 diff --git a/gui/cppcheck_ru.ts b/gui/cppcheck_ru.ts index 67a98b57c..d0023e3a1 100644 --- a/gui/cppcheck_ru.ts +++ b/gui/cppcheck_ru.ts @@ -422,16 +422,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -625,8 +625,8 @@ Parameters: -l(line) (file) - - + + Information Информационные сообщения @@ -898,14 +898,12 @@ Parameters: -l(line) (file) Помощь - Select directory to check - Выберите каталог для проверки + Выберите каталог для проверки - No suitable files found to check! - Не найдено подходящих файлов для проверки! + Не найдено подходящих файлов для проверки! @@ -913,22 +911,17 @@ Parameters: -l(line) (file) Быстрый фильтр: - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? @@ -937,40 +930,39 @@ Do you want to load this project file instead? Вы хотите загрузить этот проект? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Найдены файлы проекта из каталога. + Найдены файлы проекта из каталога. Вы хотите продолжить проверку, не используя ни одного из этих файлов проекта? - + File not found Файл не найден - + Bad XML Некорректный XML - + Missing attribute Пропущен атрибут - + Bad attribute value Некорректное значение атрибута - + Unsupported format Неподдерживаемый формат - + Failed to load the selected library '%1'. %2 Не удалось загрузить выбранную библиотеку '%1'. @@ -981,12 +973,12 @@ Do you want to proceed checking without using any of these project files?Не удалось загрузить %1. Установленный Cppcheck поврежден. Вы можете использовать ключ --data-dir=<directory> в командной строке, чтобы указать, где расположен этот файл. - + License Лицензия - + Authors Авторы @@ -996,13 +988,13 @@ Do you want to proceed checking without using any of these project files?XML файлы версии 2 (*.xml);;XML файлы версии 1 (*.xml);;Текстовые файлы (*.txt);;CSV файлы (*.csv) - + Save the report file Сохранить файл с отчетом - - + + XML files (*.xml) XML-файлы (*.xml) @@ -1016,54 +1008,53 @@ This is probably because the settings were changed between the Cppcheck versions Возможно, это связано с изменениями в версии программы. Пожалуйста, проверьте (и исправьте) настройки приложения. - + You must close the project file before selecting new files or directories! Вы должны закрыть проект перед выбором новых файлов или директорий! - Select files to check - Выберите файлы для проверки + Выберите файлы для проверки - + The library '%1' contains unknown elements: %2 Библиотека '%1' содержит неизвестные элементы: %2 - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1072,16 +1063,15 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Открыть файл с отчетом - Checking is running. Do you want to stop the checking and exit Cppcheck? - Идет проверка. + Идет проверка. Вы хотите завершить проверку и выйти? @@ -1094,17 +1084,17 @@ Do you want to stop the checking and exit Cppcheck? XML файлы версии 2 (*.xml) - + Text files (*.txt) Текстовые файлы (*.txt) - + CSV files (*.csv) CSV файлы(*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -1121,45 +1111,79 @@ The user interface language has been reset to English. Open the Preferences-dial The user interface language has been reset to English. Open the Preferences-dialog to select any of the available languages. - - + + Project files (*.cppcheck);;All files(*.*) Файлы проекта (*.cppcheck);;Все файлы(*.*) - + Select Project File Выберите файл проекта - - + + Project: Проект: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename Выберите имя файла для проекта - + No project file loaded Файл с проектом не загружен - + The project file %1 diff --git a/gui/cppcheck_sr.ts b/gui/cppcheck_sr.ts index 402e408ac..d00e44721 100644 --- a/gui/cppcheck_sr.ts +++ b/gui/cppcheck_sr.ts @@ -410,16 +410,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -613,8 +613,8 @@ Parameters: -l(line) (file) - - + + Information @@ -890,14 +890,12 @@ Parameters: -l(line) (file) &Help - Select directory to check - Select directory to check + Select directory to check - No suitable files found to check! - No suitable files found to check! + No suitable files found to check! @@ -905,67 +903,55 @@ Parameters: -l(line) (file) - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? - - Found project files from the directory. - -Do you want to proceed checking without using any of these project files? - - - - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Failed to load the selected library '%1'. %2 - + License License - + Authors Authors @@ -974,13 +960,13 @@ Do you want to proceed checking without using any of these project files?XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Save the report file Save the report file - - + + XML files (*.xml) XML files (*.xml) @@ -992,130 +978,156 @@ This is probably because the settings were changed between the Cppcheck versions - + You must close the project file before selecting new files or directories! - Select files to check - Select files to check + Select files to check - + The library '%1' contains unknown elements: %2 - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file - - Checking is running. - -Do you want to stop the checking and exit Cppcheck? - - - - + Text files (*.txt) Text files (*.txt) - + CSV files (*.csv) - + Cppcheck - %1 Cppcheck - %1 - - + + Project files (*.cppcheck);;All files(*.*) - + Select Project File - - + + Project: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename - + No project file loaded - + The project file %1 diff --git a/gui/cppcheck_sv.ts b/gui/cppcheck_sv.ts index b3ca354bb..6daa07e6f 100644 --- a/gui/cppcheck_sv.ts +++ b/gui/cppcheck_sv.ts @@ -440,16 +440,16 @@ Exempel: - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -643,8 +643,8 @@ Exempel: - - + + Information Information @@ -917,14 +917,12 @@ Exempel: &Hjälp - Select directory to check - Välj katalog som skall kontrolleras + Välj katalog som skall kontrolleras - No suitable files found to check! - Inga lämpliga filer hittades! + Inga lämpliga filer hittades! @@ -932,22 +930,21 @@ Exempel: Snabbfilter: - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) C/C++ källkod, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - + Select configuration Välj konfiguration - Select the configuration that will be checked - Välj konfiguration som kommer analyseras + Välj konfiguration som kommer analyseras - + Found project file: %1 Do you want to load this project file instead? @@ -956,53 +953,52 @@ Do you want to load this project file instead? Vill du ladda denna projektfil istället? - Found project files from the directory. Do you want to proceed checking without using any of these project files? - Hittade projektfil(er) i mappen. + Hittade projektfil(er) i mappen. Vill du fortsätta analysen utan att använda någon av dessa projektfiler? - + File not found Filen hittades ej - + Bad XML Ogiltig XML - + Missing attribute Attribut finns ej - + Bad attribute value Ogiltigt attribut värde - + Unsupported format Format stöds ej - + Failed to load the selected library '%1'. %2 Misslyckades att ladda valda library '%1'. %2 - + License Licens - + Authors Utvecklare @@ -1012,13 +1008,13 @@ Vill du fortsätta analysen utan att använda någon av dessa projektfiler?XML filer version 2 (*.xml);;XML filer version 1 (*.xml);;Text filer (*.txt);;CSV filer (*.csv) - + Save the report file Spara rapport - - + + XML files (*.xml) XML filer (*.xml) @@ -1032,54 +1028,53 @@ This is probably because the settings were changed between the Cppcheck versions En trolig orsak är att inställningarna ändrats för olika Cppcheck versioner. Kontrollera programinställningarna. - + You must close the project file before selecting new files or directories! Du måste stänga projektfilen innan nya filer eller sökvägar kan väljas! - Select files to check - Välj filer att kontrollera + Välj filer att kontrollera - + The library '%1' contains unknown elements: %2 Library filen '%1' har element som ej hanteras: %2 - + Duplicate platform type Dubbel plattformstyp - + Platform type redefined Plattformstyp definieras igen - + Unknown element Element hanteras ej - + Unknown issue Något problem - + Error Fel - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. Misslyckades att ladda %1. Din Cppcheck installation är ej komplett. Du kan använda --data-dir<directory> på kommandoraden för att specificera var denna fil finns. Det är meningen att --data-dir kommandot skall köras under installationen,så GUIt kommer ej visas när --data-dir används allt som händer är att en inställning görs. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1088,16 +1083,15 @@ Opening a new XML file will clear current results.Do you want to proceed? - + Open the report file Öppna rapportfilen - Checking is running. Do you want to stop the checking and exit Cppcheck? - Cppcheck kör. + Cppcheck kör. Vill du stoppa analysen och avsluta Cppcheck? @@ -1118,17 +1112,17 @@ Vill du stoppa analysen och avsluta Cppcheck? XML filer version 2 (*.xml) - + Text files (*.txt) Text filer (*.txt) - + CSV files (*.csv) CSV filer (*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -1145,45 +1139,79 @@ The user interface language has been reset to English. Open the Preferences-dial Språket har nollställts till Engelska. Öppna Preferences och välj något av de tillgängliga språken. - - + + Project files (*.cppcheck);;All files(*.*) Projektfiler (*.cppcheck);;Alla filer(*.*) - + Select Project File Välj projektfil - - + + Project: Projekt: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? Build dir '%1' existerar ej, skapa den? - + Select Project Filename Välj Projektfil - + No project file loaded Inget projekt laddat - + The project file %1 diff --git a/gui/cppcheck_zh_CN.ts b/gui/cppcheck_zh_CN.ts index 6a4463fce..b91d37afb 100644 --- a/gui/cppcheck_zh_CN.ts +++ b/gui/cppcheck_zh_CN.ts @@ -419,16 +419,16 @@ Parameters: -l(line) (file) - - - - - - - - - - + + + + + + + + + + Cppcheck Cppcheck @@ -616,8 +616,8 @@ Parameters: -l(line) (file) - - + + Information 信息 @@ -904,24 +904,22 @@ This is probably because the settings were changed between the Cppcheck versions 这可能是因为 Cppcheck 不同版本间的设置有所不同。请检查(并修复)编辑器应用程序设置，否则编辑器程序可能不会正确启动。 - No suitable files found to check! - 未发现适合检查的文件！ + 未发现适合检查的文件！ - + You must close the project file before selecting new files or directories! 在选择新的文件或目录之前，你必须先关闭此项目文件！ - + C/C++ Source, Compile database, Visual Studio (%1 %2 *.sln *.vcxproj) - Select directory to check - 选择目录来检查 + 选择目录来检查 @@ -929,22 +927,16 @@ This is probably because the settings were changed between the Cppcheck versions 快速滤器: - Select files to check - 选择要检查的文件 + 选择要检查的文件 - + Select configuration - - Select the configuration that will be checked - - - - + Found project file: %1 Do you want to load this project file instead? @@ -953,83 +945,82 @@ Do you want to load this project file instead? 你是否想加载该项目文件？ - Found project files from the directory. Do you want to proceed checking without using any of these project files? - 在目录中找到项目文件。 + 在目录中找到项目文件。 你是否想在不使用这些项目文件的情况下，执行检查？ - + The library '%1' contains unknown elements: %2 - + File not found - + Bad XML - + Missing attribute - + Bad attribute value - + Unsupported format - + Duplicate platform type - + Platform type redefined - + Unknown element - + Unknown issue - + Failed to load the selected library '%1'. %2 - + Error - + Failed to load %1. Your Cppcheck installation is broken. You can use --data-dir=<directory> at the command line to specify where this file is located. Please note that --data-dir is supposed to be used by installation scripts and therefore the GUI does not start when it is used, all that happens is that the setting is configured. - + Current results will be cleared. Opening a new XML file will clear current results.Do you want to proceed? @@ -1038,32 +1029,31 @@ Opening a new XML file will clear current results.Do you want to proceed? - - + + XML files (*.xml) XML 文件(*.xml) - + Open the report file 打开报告文件 - Checking is running. Do you want to stop the checking and exit Cppcheck? - 检查正在执行。 + 检查正在执行。 你是否需要停止检查并退出 Cppcheck？ - + License 许可证 - + Authors 作者 @@ -1073,7 +1063,7 @@ Do you want to stop the checking and exit Cppcheck? XML 文件版本 2 (*.xml);;XML 文件版本 1 (*.xml);; 文本文件(*.txt);; CSV 文件(*.csv) - + Save the report file 保存报告文件 @@ -1086,17 +1076,17 @@ Do you want to stop the checking and exit Cppcheck? XML 文件版本 2 (*.xml) - + Text files (*.txt) 文本文件(*.txt) - + CSV files (*.csv) CSV 文件(*.csv) - + Cppcheck - %1 Cppcheck - %1 @@ -1113,45 +1103,79 @@ The user interface language has been reset to English. Open the Preferences-dial 用户界面语言已被重置为英语。打开“首选项”对话框，选择任何可用的语言。 - - + + Project files (*.cppcheck);;All files(*.*) 项目文件(*.cppcheck);;所有文件(*.*) - + Select Project File 选择项目文件 - - + + Project: 项目: - + + No suitable files found to analyze! + + + + + Select files to analyze + + + + + Select directory to analyze + + + + + Select the configuration that will be analyzed + + + + + Found project files from the directory. + +Do you want to proceed analysis without using any of these project files? + + + + + Analyzer is running. + +Do you want to stop the analysis and exit Cppcheck? + + + + XML files (*.xml);;Text files (*.txt);;CSV files (*.csv) - + Build dir '%1' does not exist, create it? - + Select Project Filename 选择项目文件名 - + No project file loaded 项目文件未加载 - + The project file %1