This will warn for cases where searching in an associative container happens before insertion, like this:
```cpp
void f1(std::set<unsigned>& s, unsigned x) {
if (s.find(x) == s.end()) {
s.insert(x);
}
}
void f2(std::map<unsigned, unsigned>& m, unsigned x) {
if (m.find(x) == m.end()) {
m.emplace(x, 1);
} else {
m[x] = 1;
}
}
```
In the case of the map it could be written as `m[x] = 1` as it will create the key if it doesnt exist, so the extra search is not necessary.
I have this marked as `performance` as it is mostly concerning performance, but there could be a copy-paste error possibly, although I dont think thats common.
Change the astStringVerbose() recursion to extend a string instead of
returning one. This has the benefit that for tokens where the recursion
runs deep (typically large arrays), the time savings can be substantial
(see comments on benchmarks further down).
The reason is that previously, for each token, the astString of its
operands was constructed, and then appended to this tokens astString.
This led to a lot of unnecessary string copying (and with that
allocations). Instead, by passing the string by reference, the number
of temporary strings is greatly reduced.
Another way of seeing it is that previously, the string was constructed
from end to beginning, but now it is constructed from the beginning to
end. There was no notable speedup by preallocating the entire string
using string::reserve() (at least not on Linux).
To benchmark, the changes and master were tested on Linux using the
commands:
make
time cppcheck --debug --verbose $file >/dev/null
i.e., the cppcheck binary was compiled with the settings in the
Makefile. Printing the output to screen or file will of course take
longer time.
In Trac ticket #8355 which triggered this change, an example file from the
Wine repository was attached. Running the above cppcheck on master took
24 minutes and with the changes in this commmit, took 22 seconds.
Another test made was on lib/tokenlist.cpp in the cppcheck repo, which is
more "normal" file. On that file there was no measurable time difference.
A synthetic benchmark was generated to illustrate the effects on dumping
the ast for arrays of different sizes. The generate code looked as
follows:
const int array[] = {...};
with different number of elements. The results are as follows (times are
in seconds):
N master optimized
10 0.1 0.1
100 0.1 0.1
1000 2.8 0.7
2000 19 1.8
3000 53 3.8
5000 350 10
10000 3215 38
As we can see, for small arrays, there is no time difference, but for
large arrays the time savings are substantial.
This handles concatenated strings and characters from simplecpp.
Previously, L'c' would be preprocessed to the tokens "L" and "'c'".
cppcheck would then remove the "L" token and set "'c'" to be a wide
character literal. Now, it needs to remove the prefix instead.
When doing this, add handling of utf32 encoded literals (U) and UTF-8
encoded literals (u8).
* Code changes for Token::mImpl optimisation
* Added new TokenImpl optimisation
Moving members to the TokenImpl struct reduces the size of the Token class, which is a fairly significant optimisation. In my testing on Windows with 32-bit Release-PCRE, this change reduced the size of the Token class from 108 bits to 52 bits and reduced run-time of my test case by around 20%.
* Several optimisations
Deleted some code that ran very slowly and did nothing, as there is no need to change a Token's string to null if you are about to delete it.
Added a frontToken to simplifyCalculations to reduce the amount of work it has to do on already-simplified calculations.
Moved template removal to the end of the list as this reduces redundant iteration and saves time.
* Added tok argument to simplifyCalculations
This means callers can avoid unnecessary work if they know which tokens have already been simplified. Passing nullptr indicates the original behaviour (starting from the front of the list).
* Removed mention of member from another change
* Re-added and optimised some code deleted in error
Changing mTemplateInstantiations to a vector avoids the high cost of doing repeated linear searches. Changing how the code iterates through the array was necessary because the vector can be resized at several points during the loop, which breaks existing references and iterators.
* Changed mTemplateInstantiations to a vector
This is an optimisation that makes repeated linear searches of this collection significantly faster.
Also added a copy constructor to TokenAndName so code can make copies of these objects to keep a reference if a vector gets resized.
* A cleaner optimisation to removing template tokens
This reverts the previous change to made mInstantiatedTemplates a vector and the iterator changes to support this, and makes mTypesUsedInTemplateInstantiation so the eraseTokens logic can be unified.
* Reverted vector to list
Also made mTypesUsedInTemplateInstantiation a vector of TokenAndName objects so it can share the same logic as the other members.
* Added member for template simplifier pointer
This can be used more efficiently than marking Tokens with a flag and then searching through all templates to find the one that matches.
* Turned loop inside out
This means we only have to iterate through the std::list once. std::list is very expensive to iterate through.
* Latest code from danmar and fixed optimisations
In particular I have optimised simplifying template instantiation names as this was incredibly slow because of the number of times it had to iterate through the template instantiation list. Previous optimisations to this weren't very effective and broke some edge cases.
* Added changes from danmar
Made mExplicitInstantiationsToDelete a vector of TokenAndName to be consistent with the rest of the members, which are cleaned up very efficiently.
* Tokens can have many templateSimplifierPointers
* templateSimplifierPointers must be kept in sync
* Fixed#8693 (Template specialization: Constructor detected as normal function (functionStatic error))
Refactor template simplifier to remove the existing full specialization
function expandSpecialized and allow full specializations to use the
existing function expandTemplate. The function expandTemplate was
modified to either expand the template like it originally did by copying
it or to modify the template in place. Both instantiated and
uninstantiated full specializations are modified in place. This also
fixes#8692 and probably other related tickets as well.
The function simplifyTemplates now tries twice to simplify templates so
more templates can be simplified. We should try as many times as
necessary to find all possible templates. We can't do that now because
uninstantiated templates are left unchanged. It is relatively straight
forward to have the new code also expand in place uninstantiated
templates with their symbolic types but namespaces are not handled
properly (ticket #8671) and it would introduce regressions.
* Fix travis warnings.
* Add tests for invalid ranges
* Refactor loadLibErrors
This reduces the amount of code slightly and will simplify adding
more tests.
* Handle empty valid field
Before this change, the sequence <valid></valid> in a config file would
result in a segmentation fault. Now an empty field results in the error
message:
cppcheck: Failed to load library configuration file 'mycfg.cfg'. Bad attribute value '""'
* Add support for valid for floating point arguments
Previously, it was not possible to add valid ranges to floating point
arguments since it only handled integers. This made ranges not work well
for floating point arguments since arguments were cast to integers
before the ranges were handled.
Fix this by using doubles instead of integers if the argument is a float.
Add some tests for this and make sure errors are printed with enough
precision (somewhat arbitrarily chosen).
Note that it is still only possible to add integer ranges (i.e. -1:1).
* Add support for floats in configuration valid range
Now that it is possible to handle decimal arguments, there is no reason
to not allow non-integer ranges. Take care to not allow broken
configurations.
* Move check to within if-clause
* Move asin{,f,l} and acos{,f,l} input checks to config file
* Added declaration for deletePrevious function
* Added definition for deletePrevious function
* Fixed crash from deleteThis invalidating pointers
The crash was caused by deleteThis() invalidating the pointer to a constant variable usage. This happened when a usage followed an assignment. This fixes bug #8579.
* Added tokensFront to match tokensBack
This means deletePrevious can set the list's front if necessary.
* Initialised tokensFront in appropriate places
* Switched to using default Token constructor
* Switched to using Token default constructor
* Switched to using default constructor for Token
* Added missing argument to Token constructor
* Changed to use default constructor for Tokens
* Switched to using default constructor for Tokens
* Switched to using default constructor for Token
* Added new test for deleting front Token
Also made sure to use the correct constructor for Token in other tests.
* Syntax error
* Replaced tokensFront and tokensBack with a struct
This decreases the size of the Token class for performance purposes.
* Replaced tokensFront and tokensBack with a struct
* Added tokensFrontBack to destructor
* Reworked to use TokensBackFront struct
Also ran astyle.
* Reworked to use TokenList's TokensFrontBack member
* Reworked to use TokensFrontBack struct
* Reworked to use TokensFrontBack struct
* Reworked to work with TokensFrontBack struct
* Removed unnecessary scope operator
* Added missing parentheses
* Fixed syntax error
* Removed unnecessary constructor
* Default constructor now 0-initialises everything
This is safer for not using a temporary TokensFrontBack object, and doesn't use delegating constructors which aren't supported yet.
* Fixed unsafe null check
* Added missing explicit keyword
* Fixing stylistic nits
Removed default constructor as it has been superseded by the single-argument constructor with a default argument value.
Renamed listEnds to tokensFrontBack.
Fixed if statement that was supposed to be adding safety but would actually cause a crash if tokensFrontBack was null.
* Fixing stylistic nits
Removed default constructor and replaced it with a single-argument constructor with a default value.
* Fixing stylistic nits
Renamed _listEnds to _tokensFrontBack.
* Fixing stylistic nits
Renamed _listEnds to _tokensFrontBack.
Three attributes are reset in this member function even if their values
are stored in the same token object.
Move a corresponding sanity check so that less assignments could be
performed eventually.
Link: https://trac.cppcheck.net/ticket/8532
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Before:
[/tmp/test.c:8]: (style) Checking if unsigned variable '.' is less than zero.
[/tmp/test.c:12]: (style) Checking if unsigned variable '.' is less than zero.
After:
[/tmp/test.c:8]: (style) Checking if unsigned variable 'd.n' is less than zero.
[/tmp/test.c:12]: (style) Checking if unsigned variable 'd.n' is less than zero.
- Removed simplifyConst() because it did the opposite of the (superior) simplifyStaticConst()
- Execute simplifyStaticConst() in simplifyTokenList1() - there is no reason to defer it, and it is required to properly parse declarations like "unsigned static int i;"
- Fixed simplifyStaticConst() to handle more patterns. It did not work at the beginning of the token list and for function arguments
- Reimplemented Tokenizer::simplifyStdType()
-> properly support all possible ways to declare integers as requested by the standard, instead of only a few common permutations of "unsigned|signed", "short|char|long|int"
-> Fixed parsing of _Complex/complex types
1) Added global static const std::string emptyString; object:
-> Replaces some static variables in functions which might be not threadsafe
-> Avoids constructor call (std::string::string(""))
-> Even functions that return an empty string in some branches can return by reference now.
Added to config.h to ensure that it is available everywhere
2) Added overloads for TestFixture::assertEquals for the most common use cases:
-> Moves conversion from const char[] to std::string into a function, reducing code duplication in binary.
- Encapsulate parameters passed through AST compiler functions in a struct
-> Reduces maintenance overhead when changing them
-> Contains parameter indicating if the file is C or C++
- Added eKeyword Token type (at the moment, only true for C++ keyword "delete", but should be set for other keywords as well)
-> Performance gain of up to 15% on entire checking time (depends on setup; Result was checked with VS12 (x64), matchcompiled version, ran on tinyxml and cppcheck itself)
Daniel Marjamäki
orbitcowboy
Paul Fultz II
adamjrichter
Rikard Falkeborn
rebnridgway
IOBYTE
amai2012
Markus Elfring
PKEuS
jrp2014
Simon Martin
orbitcowboy
Florin Iucha
Heiko Eißfeldt
Ayaz Salikhov
Ayaz Salikhov
PKEuS
Matthias Krüger
Frank Zingsheim
Boris Egorov
Lauri Nurmi
Alexander Mai
Philipp Kloke
Dmitry-Me
PKEuS
Simon Martin
Thomas Jarosch