]> Once you have your face and font objects configured as desired and your input buffer is filled with the characters you need to shape, all you need to do is call hb_shape(). HarfBuzz will return the shaped version of the text in the same buffer that you provided, but it will be in output mode. At that point, you can iterate through the glyphs in the buffer, drawing each one at the specified position or handing them off to the appropriate graphics library. For the most part, HarfBuzz's shaping step is straightforward from the outside. But that doesn't mean there will never be cases where you want to look under the hood and see what is happening on the inside. HarfBuzz provides facilities for doing that, too.

The hb_shape() function call takes four arguments: the font object to use, the buffer of characters to shape, an array of user-specified features to apply, and the length of that feature array. The feature array can be NULL, so for the sake of simplicity we will start with that case. Internally, HarfBuzz looks at the tables of the font file to determine where glyph classes, substitutions, and positioning are defined, using that information to decide which shaper to use (ot for OpenType fonts, aat for Apple Advanced Typography fonts, and so on). It also looks at the direction, script, and language properties of the segment to figure out which script-specific shaping model is needed (at least, in shapers that support multiple options). If a font has a GDEF table, then that is used for glyph classes; if not, HarfBuzz will fall back to Unicode categorization by code point. If a font has an AAT morx table, then it is used for substitutions; if not, but there is a GSUB table, then the GSUB table is used. If the font has an AAT kerx table, then it is used for positioning; if not, but there is a GPOS table, then the GPOS table is used. If neither table is found, but there is a kern table, then HarfBuzz will use the kern table. If there is no kerx, no GPOS, and no kern, HarfBuzz will fall back to positioning marks itself. With a well-behaved OpenType font, you expect GDEF, GSUB, and GPOS tables to all be applied. HarfBuzz implements the script-specific shaping models in internal functions, rather than in the public API. The algorithms used for shaping can be quite involved; HarfBuzz tries to be compatible with the OpenType Layout specification and, wherever there is any ambiguity, HarfBuzz attempts to replicate the output of Microsoft's Uniscribe engine. See the Microsoft Typography pages for more detail. In general, though, all that you need to know is that hb_shape() returns the results of shaping in the same buffer that you provided. The buffer's content type will now be set to HB_BUFFER_CONTENT_TYPE_GLYPHS, indicating that it contains shaped output, rather than input text. You can now extract the glyph information and positioning arrays: hb_glyph_info_t *glyph_info = hb_buffer_get_glyph_infos(buf, &glyph_count); hb_glyph_position_t *glyph_pos = hb_buffer_get_glyph_positions(buf, &glyph_count); The glyph information array holds a hb_glyph_info_t for each output glyph, which has two fields: codepoint and cluster. Whereas, in the input buffer, the codepoint field contained the Unicode code point, it now contains the glyph ID of the corresponding glyph in the font. The cluster field is an integer that you can use to help identify when shaping has reordered, split, or combined code points; we will say more about that in the next chapter. The glyph positions array holds a corresponding hb_glyph_position_t for each output glyph, containing four fields: x_advance, y_advance, x_offset, and y_offset. The advances tell you how far you need to move the drawing point after drawing this glyph, depending on whether you are setting horizontal text (in which case you will have x advances) or vertical text (for which you will have y advances). The x and y offsets tell you where to move to start drawing the glyph; usually you will have both and x and a y offset, regardless of the text direction. Most of the time, you will rely on a font-rendering library or other graphics library to do the actual drawing of glyphs, so you will need to iterate through the glyphs in the buffer and pass the corresponding values off.

OpenType features enable fonts to include smart behavior, implemented as "lookup" rules stored in the GSUB and GPOS tables. The OpenType specification defines a long list of standard features that fonts can use for these behaviors; each feature has a four-character reserved name and a well-defined semantic meaning. Some OpenType features are defined for the purpose of supporting script-specific shaping, and are automatically activated, but only when a buffer's script property is set to a script that the feature supports. Other features are more generic and can apply to several (or any) script, and shaping engines are expected to implement them. By default, HarfBuzz activates several of these features on every text run. They include abvm, blwm, ccmp, locl, mark, mkmk, and rlig. In addition, if the text direction is horizontal, HarfBuzz also applies the calt, clig, curs, dist, kern, liga and rclt, features. Additionally, when HarfBuzz encounters a fraction slash (U+2044), it looks backward and forward for decimal digits (Unicode General Category = Nd), and enables features numr on the sequence before the fraction slash, dnom on the sequence after the fraction slash, and frac on the whole sequence including the fraction slash. Some script-specific shaping models (see ) disable some of the features listed above: Hangul: calt Indic: liga Khmer: liga If the text direction is vertical, HarfBuzz applies the vert feature by default. Still other features are designed to be purely optional and left up to the application or the end user to enable or disable as desired. You can adjust the set of features that HarfBuzz applies to a buffer by supplying an array of hb_feature_t features as the third argument to hb_shape(). For a simple case, let's just enable the dlig feature, which turns on any "discretionary" ligatures in the font: hb_feature_t userfeatures[1]; userfeatures[0].tag = HB_TAG('d','l','i','g'); userfeatures[0].value = 1; userfeatures[0].start = HB_FEATURE_GLOBAL_START; userfeatures[0].end = HB_FEATURE_GLOBAL_END; HB_FEATURE_GLOBAL_END and HB_FEATURE_GLOBAL_END are macros we can use to indicate that the features will be applied to the entire buffer. We could also have used a literal 0 for the start and a -1 to indicate the end of the buffer (or have selected other start and end positions, if needed). When we pass the userfeatures array to hb_shape(), any discretionary ligature substitutions from our font that match the text in our buffer will get performed: hb_shape(font, buf, userfeatures, num_features); Just like we enabled the dlig feature by setting its value to 1, you would disable a feature by setting its value to 0. Some features can take other value settings; be sure you read the full specification of each feature tag to understand what it does and how to control it.

The basic version of hb_shape() determines its shaping strategy based on examining the capabilities of the font file. OpenType font tables cause HarfBuzz to try the ot shaper, while AAT font tables cause HarfBuzz to try the aat shaper. In the real world, however, a font might include some unusual mix of tables, or one of the tables might simply be broken for the script you need to shape. So, sometimes, you might not want to rely on HarfBuzz's process for deciding what to do, and just tell hb_shape() what you want it to try. hb_shape_full() is an alternate shaping function that lets you supply a list of shapers for HarfBuzz to try, in order, when shaping your buffer. For example, if you have determined that HarfBuzz's attempts to work around broken tables gives you better results than the AAT shaper itself does, you might move the AAT shaper to the end of your list of preferences and call hb_shape_full() char *shaperprefs[3] = {"ot", "default", "aat"}; ... hb_shape_full(font, buf, userfeatures, num_features, shaperprefs); to get results you are happier with. You may also want to call hb_shape_list_shapers() to get a list of the shapers that were built at compile time in your copy of HarfBuzz.

Internally, HarfBuzz uses a structure called a shape plan to track its decisions about how to shape the contents of a buffer. The hb_shape() function builds up the shape plan by examining segment properties and by inspecting the contents of the font. This process can involve some decision-making and trade-offs — for example, HarfBuzz inspects the GSUB and GPOS lookups for the script and language tags set on the segment properties, but it falls back on the lookups under the DFLT tag (and sometimes other common tags) if there are actually no lookups for the tag requested. HarfBuzz also includes some work-arounds for handling well-known older font conventions that do not follow OpenType or Unicode specifications, for buggy system fonts, and for peculiarities of Microsoft Uniscribe. All of that means that a shape plan, while not something that you should edit directly in client code, still might be an object that you want to inspect. Furthermore, if resources are tight, you might want to cache the shape plan that HarfBuzz builds for your buffer and font, so that you do not have to rebuild it for every shaping call. You can create a cacheable shape plan with hb_shape_plan_create_cached(face, props, user_features, num_user_features, shaper_list), where face is a face object (not a font object, notably), props is an hb_segment_properties_t, user_features is an array of hb_feature_ts (with length num_user_features), and shaper_list is a list of shapers to try. Shape plans are objects in HarfBuzz, so there are reference-counting functions and user-data attachment functions you can use. hb_shape_plan_reference(shape_plan) increases the reference count on a shape plan, while hb_shape_plan_destroy(shape_plan) decreases the reference count, destroying the shape plan when the last reference is dropped. You can attach user data to a shaper (with a key) using the hb_shape_plan_set_user_data(shape_plan,key,data,destroy,replace) function, optionally supplying a destroy callback to use. You can then fetch the user data attached to a shape plan with hb_shape_plan_get_user_data(shape_plan, key).