nghttp2/doc/nghttpx.1.rst

.. GENERATED by help2rst.py.  DO NOT EDIT DIRECTLY.

.. program:: nghttpx

nghttpx(1)
==========

SYNOPSIS
--------

**nghttpx** [OPTIONS]... [<PRIVATE_KEY> <CERT>]

DESCRIPTION
-----------

A reverse proxy for HTTP/2, HTTP/1 and SPDY.

.. describe:: <PRIVATE_KEY>

    
    Set  path  to  server's private  key.   Required  unless
    "no-tls" parameter is used in :option:`--frontend` option.

.. describe:: <CERT>

    Set  path  to  server's  certificate.   Required  unless
    "no-tls"  parameter is  used in  :option:`--frontend` option.   To
    make OCSP stapling work, this must be an absolute path.


OPTIONS
-------

The options are categorized into several groups.

Connections
~~~~~~~~~~~

.. option:: -b, --backend=(<HOST>,<PORT>|unix:<PATH>)[;[<PATTERN>[:...]][[;PARAM]...]


    Set  backend  host  and   port.   The  multiple  backend
    addresses are  accepted by repeating this  option.  UNIX
    domain socket  can be  specified by prefixing  path name
    with "unix:" (e.g., unix:/var/run/backend.sock).

    Optionally, if <PATTERN>s are given, the backend address
    is  only  used  if  request  matches  the  pattern.   If
    :option:`--http2-proxy`  is  used,  <PATTERN>s are  ignored.   The
    pattern  matching is  closely  designed  to ServeMux  in
    net/http package of  Go programming language.  <PATTERN>
    consists of  path, host +  path or just host.   The path
    must start  with "*/*".  If  it ends with "*/*",  it matches
    all  request path  in  its subtree.   To  deal with  the
    request  to the  directory without  trailing slash,  the
    path which ends  with "*/*" also matches  the request path
    which  only  lacks  trailing  '*/*'  (e.g.,  path  "*/foo/*"
    matches request path  "*/foo*").  If it does  not end with
    "*/*", it  performs exact match against  the request path.
    If host  is given, it  performs exact match  against the
    request host.  If  host alone is given,  "*/*" is appended
    to it,  so that it  matches all request paths  under the
    host   (e.g.,   specifying   "nghttp2.org"   equals   to
    "nghttp2.org/").

    Patterns with  host take  precedence over  patterns with
    just path.   Then, longer patterns take  precedence over
    shorter ones.

    Host  can  include "\*"  in  the  left most  position  to
    indicate  wildcard match  (only suffix  match is  done).
    The "*" must match at least one character.  For example,
    host    pattern    "\*.nghttp2.org"    matches    against
    "www.nghttp2.org"  and  "git.ngttp2.org", but  does  not
    match  against  "nghttp2.org".   The exact  hosts  match
    takes precedence over the wildcard hosts match.

    If <PATTERN> is omitted or  empty string, "*/*" is used as
    pattern,  which  matches  all request  paths  (catch-all
    pattern).  The catch-all backend must be given.

    When doing  a match, nghttpx made  some normalization to
    pattern, request host and path.  For host part, they are
    converted to lower case.  For path part, percent-encoded
    unreserved characters  defined in RFC 3986  are decoded,
    and any  dot-segments (".."  and ".")   are resolved and
    removed.

    For   example,   :option:`-b`\'127.0.0.1,8080;nghttp2.org/httpbin/'
    matches the  request host "nghttp2.org" and  the request
    path "*/httpbin/get*", but does not match the request host
    "nghttp2.org" and the request path "*/index.html*".

    The  multiple <PATTERN>s  can  be specified,  delimiting
    them            by           ":".             Specifying
    :option:`-b`\'127.0.0.1,8080;nghttp2.org:www.nghttp2.org'  has  the
    same  effect  to specify  :option:`-b`\'127.0.0.1,8080;nghttp2.org'
    and :option:`-b`\'127.0.0.1,8080;www.nghttp2.org'.

    The backend addresses sharing same <PATTERN> are grouped
    together forming  load balancing  group.

    Several parameters <PARAM> are accepted after <PATTERN>.
    The  parameters are  delimited  by  ";".  The  available
    parameters       are:      "proto=<PROTO>",       "tls",
    "sni=<SNI_HOST>",   "fall=<N>",  and   "rise=<N>".   The
    parameter consists  of keyword, and  optionally followed
    by "=" and value.  For example, the parameter "proto=h2"
    consists  of the  keyword "proto"  and value  "h2".  The
    parameter "tls"  consists of  the keyword  "tls" without
    value.  Each parameter is described as follows.

    The backend application protocol  can be specified using
    optional  "proto"   parameter,  and   in  the   form  of
    "proto=<PROTO>".  <PROTO> should be one of the following
    list  without  quotes:  "h2", "http/1.1".   The  default
    value of <PROTO> is  "http/1.1".  Note that usually "h2"
    refers to HTTP/2  over TLS.  But in this  option, it may
    mean HTTP/2  over cleartext TCP unless  "tls" keyword is
    used (see below).

    TLS  can   be  enabled  by  specifying   optional  "tls"
    parameter.  TLS is not enabled by default.

    With "sni=<SNI_HOST>" parameter, it can override the TLS
    SNI  field  value  with  given  <SNI_HOST>.   This  will
    default to the backend <HOST> name

    The  feature  to detect  whether  backend  is online  or
    offline can be enabled  using optional "fall" and "rise"
    parameters.   Using  "fall=<N>"  parameter,  if  nghttpx
    cannot connect  to a  this backend <N>  times in  a row,
    this  backend  is  assumed  to be  offline,  and  it  is
    excluded from load balancing.  If <N> is 0, this backend
    never  be excluded  from load  balancing whatever  times
    nghttpx cannot connect  to it, and this  is the default.
    There is  also "rise=<N>" parameter.  After  backend was
    excluded from load balancing group, nghttpx periodically
    attempts to make a connection to the failed backend, and
    if the  connection is made  successfully <N> times  in a
    row, the backend is assumed to  be online, and it is now
    eligible  for load  balancing target.   If <N>  is 0,  a
    backend  is permanently  offline, once  it goes  in that
    state, and this is the default behaviour.

    Since ";" and ":" are  used as delimiter, <PATTERN> must
    not  contain these  characters.  Since  ";" has  special
    meaning in shell, the option value must be quoted.


    Default: ``127.0.0.1,80``

.. option:: -f, --frontend=(<HOST>,<PORT>|unix:<PATH>)[;no-tls]

    Set  frontend  host and  port.   If  <HOST> is  '\*',  it
    assumes  all addresses  including  both  IPv4 and  IPv6.
    UNIX domain  socket can  be specified by  prefixing path
    name  with  "unix:" (e.g.,  unix:/var/run/nghttpx.sock).
    This  option can  be used  multiple times  to listen  to
    multiple addresses.

    Optionally, TLS  can be disabled by  specifying "no-tls"
    parameter.  TLS is enabled by default.


    Default: ``*,3000``

.. option:: --backlog=<N>

    Set listen backlog size.

    Default: ``512``

.. option:: --backend-address-family=(auto|IPv4|IPv6)

    Specify  address  family  of  backend  connections.   If
    "auto" is given, both IPv4  and IPv6 are considered.  If
    "IPv4" is  given, only  IPv4 address is  considered.  If
    "IPv6" is given, only IPv6 address is considered.

    Default: ``auto``

.. option:: --backend-http-proxy-uri=<URI>

    Specify      proxy       URI      in       the      form
    http://[<USER>:<PASS>@]<PROXY>:<PORT>.    If   a   proxy
    requires  authentication,  specify  <USER>  and  <PASS>.
    Note that  they must be properly  percent-encoded.  This
    proxy  is used  when the  backend connection  is HTTP/2.
    First,  make  a CONNECT  request  to  the proxy  and  it
    connects  to the  backend  on behalf  of nghttpx.   This
    forms  tunnel.   After  that, nghttpx  performs  SSL/TLS
    handshake with  the downstream through the  tunnel.  The
    timeouts when connecting and  making CONNECT request can
    be     specified    by     :option:`--backend-read-timeout`    and
    :option:`--backend-write-timeout` options.

.. option:: --accept-proxy-protocol

    Accept PROXY protocol version 1 on frontend connection.


Performance
~~~~~~~~~~~

.. option:: -n, --workers=<N>

    Set the number of worker threads.

    Default: ``1``

.. option:: --read-rate=<SIZE>

    Set maximum  average read  rate on  frontend connection.
    Setting 0 to this option means read rate is unlimited.

    Default: ``0``

.. option:: --read-burst=<SIZE>

    Set  maximum read  burst  size  on frontend  connection.
    Setting  0  to this  option  means  read burst  size  is
    unlimited.

    Default: ``0``

.. option:: --write-rate=<SIZE>

    Set maximum  average write rate on  frontend connection.
    Setting 0 to this option means write rate is unlimited.

    Default: ``0``

.. option:: --write-burst=<SIZE>

    Set  maximum write  burst size  on frontend  connection.
    Setting  0 to  this  option means  write  burst size  is
    unlimited.

    Default: ``0``

.. option:: --worker-read-rate=<SIZE>

    Set maximum average read rate on frontend connection per
    worker.  Setting  0 to  this option  means read  rate is
    unlimited.  Not implemented yet.

    Default: ``0``

.. option:: --worker-read-burst=<SIZE>

    Set maximum  read burst size on  frontend connection per
    worker.  Setting 0 to this  option means read burst size
    is unlimited.  Not implemented yet.

    Default: ``0``

.. option:: --worker-write-rate=<SIZE>

    Set maximum  average write  rate on  frontend connection
    per worker.  Setting  0 to this option  means write rate
    is unlimited.  Not implemented yet.

    Default: ``0``

.. option:: --worker-write-burst=<SIZE>

    Set maximum write burst  size on frontend connection per
    worker.  Setting 0 to this option means write burst size
    is unlimited.  Not implemented yet.

    Default: ``0``

.. option:: --worker-frontend-connections=<N>

    Set maximum number  of simultaneous connections frontend
    accepts.  Setting 0 means unlimited.

    Default: ``0``

.. option:: --backend-connections-per-host=<N>

    Set  maximum number  of  backend concurrent  connections
    (and/or  streams in  case  of HTTP/2)  per origin  host.
    This option  is meaningful when :option:`--http2-proxy`  option is
    used.   The  origin  host  is  determined  by  authority
    portion of  request URI (or :authority  header field for
    HTTP/2).   To  limit  the   number  of  connections  per
    frontend        for       default        mode,       use
    :option:`--backend-connections-per-frontend`\.

    Default: ``8``

.. option:: --backend-connections-per-frontend=<N>

    Set  maximum number  of  backend concurrent  connections
    (and/or streams  in case of HTTP/2)  per frontend.  This
    option  is   only  used  for  default   mode.   0  means
    unlimited.  To limit the  number of connections per host
    with          :option:`--http2-proxy`         option,          use
    :option:`--backend-connections-per-host`\.

    Default: ``0``

.. option:: --rlimit-nofile=<N>

    Set maximum number of open files (RLIMIT_NOFILE) to <N>.
    If 0 is given, nghttpx does not set the limit.

    Default: ``0``

.. option:: --backend-request-buffer=<SIZE>

    Set buffer size used to store backend request.

    Default: ``16K``

.. option:: --backend-response-buffer=<SIZE>

    Set buffer size used to store backend response.

    Default: ``128K``

.. option:: --fastopen=<N>

    Enables  "TCP Fast  Open" for  the listening  socket and
    limits the  maximum length for the  queue of connections
    that have not yet completed the three-way handshake.  If
    value is 0 then fast open is disabled.

    Default: ``0``

.. option:: --no-kqueue

    Don't use  kqueue.  This  option is only  applicable for
    the platforms  which have kqueue.  For  other platforms,
    this option will be simply ignored.


Timeout
~~~~~~~

.. option:: --frontend-http2-read-timeout=<DURATION>

    Specify  read  timeout  for  HTTP/2  and  SPDY  frontend
    connection.

    Default: ``3m``

.. option:: --frontend-read-timeout=<DURATION>

    Specify read timeout for HTTP/1.1 frontend connection.

    Default: ``1m``

.. option:: --frontend-write-timeout=<DURATION>

    Specify write timeout for all frontend connections.

    Default: ``30s``

.. option:: --stream-read-timeout=<DURATION>

    Specify  read timeout  for HTTP/2  and SPDY  streams.  0
    means no timeout.

    Default: ``0``

.. option:: --stream-write-timeout=<DURATION>

    Specify write  timeout for  HTTP/2 and SPDY  streams.  0
    means no timeout.

    Default: ``0``

.. option:: --backend-read-timeout=<DURATION>

    Specify read timeout for backend connection.

    Default: ``1m``

.. option:: --backend-write-timeout=<DURATION>

    Specify write timeout for backend connection.

    Default: ``30s``

.. option:: --backend-keep-alive-timeout=<DURATION>

    Specify keep-alive timeout for backend connection.

    Default: ``2s``

.. option:: --listener-disable-timeout=<DURATION>

    After accepting  connection failed,  connection listener
    is disabled  for a given  amount of time.   Specifying 0
    disables this feature.

    Default: ``30s``

.. option:: --frontend-http2-setting-timeout=<DURATION>

    Specify  timeout before  SETTINGS ACK  is received  from
    client.

    Default: ``10s``

.. option:: --backend-http2-settings-timeout=<DURATION>

    Specify  timeout before  SETTINGS ACK  is received  from
    backend server.

    Default: ``10s``


SSL/TLS
~~~~~~~

.. option:: --ciphers=<SUITE>

    Set allowed  cipher list.  The  format of the  string is
    described in OpenSSL ciphers(1).

.. option:: -k, --insecure

    Don't  verify backend  server's  certificate  if TLS  is
    enabled for backend connections.

.. option:: --cacert=<PATH>

    Set path to trusted CA  certificate file used in backend
    TLS connections.   The file must  be in PEM  format.  It
    can  contain  multiple   certificates.   If  the  linked
    OpenSSL is configured to  load system wide certificates,
    they are loaded at startup regardless of this option.

.. option:: --private-key-passwd-file=<PATH>

    Path  to file  that contains  password for  the server's
    private key.   If none is  given and the private  key is
    password protected it'll be requested interactively.

.. option:: --subcert=<KEYPATH>:<CERTPATH>

    Specify  additional certificate  and  private key  file.
    nghttpx will  choose certificates based on  the hostname
    indicated  by  client  using TLS  SNI  extension.   This
    option  can  be  used  multiple  times.   To  make  OCSP
    stapling work, <CERTPATH> must be absolute path.

.. option:: --dh-param-file=<PATH>

    Path to file that contains  DH parameters in PEM format.
    Without  this   option,  DHE   cipher  suites   are  not
    available.

.. option:: --npn-list=<LIST>

    Comma delimited list of  ALPN protocol identifier sorted
    in the  order of preference.  That  means most desirable
    protocol comes  first.  This  is used  in both  ALPN and
    NPN.  The parameter must be  delimited by a single comma
    only  and any  white spaces  are  treated as  a part  of
    protocol string.

    Default: ``h2,h2-16,h2-14,spdy/3.1,http/1.1``

.. option:: --verify-client

    Require and verify client certificate.

.. option:: --verify-client-cacert=<PATH>

    Path  to file  that contains  CA certificates  to verify
    client certificate.  The file must be in PEM format.  It
    can contain multiple certificates.

.. option:: --client-private-key-file=<PATH>

    Path to  file that contains  client private key  used in
    backend client authentication.

.. option:: --client-cert-file=<PATH>

    Path to  file that  contains client certificate  used in
    backend client authentication.

.. option:: --tls-proto-list=<LIST>

    Comma delimited list of  SSL/TLS protocol to be enabled.
    The following protocols  are available: TLSv1.2, TLSv1.1
    and   TLSv1.0.    The   name   matching   is   done   in
    case-insensitive   manner.    The  parameter   must   be
    delimited by  a single comma  only and any  white spaces
    are  treated  as a  part  of  protocol string.   If  the
    protocol list advertised by client does not overlap this
    list,  you  will  receive  the  error  message  "unknown
    protocol".

    Default: ``TLSv1.2,TLSv1.1``

.. option:: --tls-ticket-key-file=<PATH>

    Path to file that contains  random data to construct TLS
    session ticket  parameters.  If aes-128-cbc is  given in
    :option:`--tls-ticket-key-cipher`\, the  file must  contain exactly
    48    bytes.     If     aes-256-cbc    is    given    in
    :option:`--tls-ticket-key-cipher`\, the  file must  contain exactly
    80  bytes.   This  options  can be  used  repeatedly  to
    specify  multiple ticket  parameters.  If  several files
    are given,  only the  first key is  used to  encrypt TLS
    session  tickets.  Other  keys are  accepted but  server
    will  issue new  session  ticket with  first key.   This
    allows  session  key  rotation.  Please  note  that  key
    rotation  does  not  occur automatically.   User  should
    rearrange  files or  change options  values and  restart
    nghttpx gracefully.   If opening  or reading  given file
    fails, all loaded  keys are discarded and  it is treated
    as if none  of this option is given.  If  this option is
    not given or an error  occurred while opening or reading
    a file,  key is  generated every  1 hour  internally and
    they are  valid for  12 hours.   This is  recommended if
    ticket  key sharing  between  nghttpx  instances is  not
    required.

.. option:: --tls-ticket-key-memcached=<HOST>,<PORT>[;tls]

    Specify address  of memcached  server to get  TLS ticket
    keys for  session resumption.   This enables  shared TLS
    ticket key between  multiple nghttpx instances.  nghttpx
    does not set TLS ticket  key to memcached.  The external
    ticket key generator is required.  nghttpx just gets TLS
    ticket  keys  from  memcached, and  use  them,  possibly
    replacing current set  of keys.  It is up  to extern TLS
    ticket  key generator  to rotate  keys frequently.   See
    "TLS SESSION  TICKET RESUMPTION" section in  manual page
    to know the data format in memcached entry.  Optionally,
    memcached  connection  can  be  encrypted  with  TLS  by
    specifying "tls" parameter.

.. option:: --tls-ticket-key-memcached-address-family=(auto|IPv4|IPv6)

    Specify address  family of memcached connections  to get
    TLS ticket keys.  If "auto" is given, both IPv4 and IPv6
    are considered.   If "IPv4" is given,  only IPv4 address
    is considered.  If "IPv6" is given, only IPv6 address is
    considered.

    Default: ``auto``

.. option:: --tls-ticket-key-memcached-interval=<DURATION>

    Set interval to get TLS ticket keys from memcached.

    Default: ``10m``

.. option:: --tls-ticket-key-memcached-max-retry=<N>

    Set  maximum   number  of  consecutive   retries  before
    abandoning TLS ticket key  retrieval.  If this number is
    reached,  the  attempt  is considered  as  failure,  and
    "failure" count  is incremented by 1,  which contributed
    to            the            value            controlled
    :option:`--tls-ticket-key-memcached-max-fail` option.

    Default: ``3``

.. option:: --tls-ticket-key-memcached-max-fail=<N>

    Set  maximum   number  of  consecutive   failure  before
    disabling TLS ticket until next scheduled key retrieval.

    Default: ``2``

.. option:: --tls-ticket-key-cipher=<CIPHER>

    Specify cipher  to encrypt TLS session  ticket.  Specify
    either   aes-128-cbc   or  aes-256-cbc.    By   default,
    aes-128-cbc is used.

.. option:: --tls-ticket-key-memcached-cert-file=<PATH>

    Path to client certificate  for memcached connections to
    get TLS ticket keys.

.. option:: --tls-ticket-key-memcached-private-key-file=<PATH>

    Path to client private  key for memcached connections to
    get TLS ticket keys.

.. option:: --fetch-ocsp-response-file=<PATH>

    Path to  fetch-ocsp-response script file.  It  should be
    absolute path.

    Default: ``/usr/local/share/nghttp2/fetch-ocsp-response``

.. option:: --ocsp-update-interval=<DURATION>

    Set interval to update OCSP response cache.

    Default: ``4h``

.. option:: --no-ocsp

    Disable OCSP stapling.

.. option:: --tls-session-cache-memcached=<HOST>,<PORT>[;tls]

    Specify  address of  memcached server  to store  session
    cache.   This  enables   shared  session  cache  between
    multiple   nghttpx  instances.    Optionally,  memcached
    connection can be encrypted with TLS by specifying "tls"
    parameter.

.. option:: --tls-session-cache-memcached-address-family=(auto|IPv4|IPv6)

    Specify address family of memcached connections to store
    session cache.  If  "auto" is given, both  IPv4 and IPv6
    are considered.   If "IPv4" is given,  only IPv4 address
    is considered.  If "IPv6" is given, only IPv6 address is
    considered.

    Default: ``auto``

.. option:: --tls-session-cache-memcached-cert-file=<PATH>

    Path to client certificate  for memcached connections to
    store session cache.

.. option:: --tls-session-cache-memcached-private-key-file=<PATH>

    Path to client private  key for memcached connections to
    store session cache.

.. option:: --tls-dyn-rec-warmup-threshold=<SIZE>

    Specify the  threshold size for TLS  dynamic record size
    behaviour.  During  a TLS  session, after  the threshold
    number of bytes  have been written, the  TLS record size
    will be increased to the maximum allowed (16K).  The max
    record size will  continue to be used on  the active TLS
    session.  After  :option:`--tls-dyn-rec-idle-timeout` has elapsed,
    the record size is reduced  to 1300 bytes.  Specify 0 to
    always use  the maximum record size,  regardless of idle
    period.   This  behaviour  applies   to  all  TLS  based
    frontends, and TLS HTTP/2 backends.

    Default: ``1M``

.. option:: --tls-dyn-rec-idle-timeout=<DURATION>

    Specify TLS dynamic record  size behaviour timeout.  See
    :option:`--tls-dyn-rec-warmup-threshold`  for   more  information.
    This behaviour  applies to all TLS  based frontends, and
    TLS HTTP/2 backends.

    Default: ``1s``

.. option:: --no-http2-cipher-black-list

    Allow black  listed cipher  suite on  HTTP/2 connection.
    See  https://tools.ietf.org/html/rfc7540#appendix-A  for
    the complete HTTP/2 cipher suites black list.


HTTP/2 and SPDY
~~~~~~~~~~~~~~~

.. option:: -c, --frontend-http2-max-concurrent-streams=<N>

    Set the maximum number of  the concurrent streams in one
    frontend HTTP/2 and SPDY session.

    Default: `` 100``

.. option:: --backend-http2-max-concurrent-streams=<N>

    Set the maximum number of  the concurrent streams in one
    backend  HTTP/2 session.   This sets  maximum number  of
    concurrent opened pushed streams.  The maximum number of
    concurrent requests are set by a remote server.

    Default: ``100``

.. option:: --frontend-http2-window-bits=<N>

    Sets the  per-stream initial window size  of HTTP/2 SPDY
    frontend connection.  For HTTP/2,  the size is 2\*\*<N>-1.
    For SPDY, the size is 2\*\*<N>.

    Default: ``16``

.. option:: --frontend-http2-connection-window-bits=<N>

    Sets the  per-connection window size of  HTTP/2 and SPDY
    frontend   connection.    For   HTTP/2,  the   size   is
    2**<N>-1. For SPDY, the size is 2\*\*<N>.

    Default: ``16``

.. option:: --backend-http2-window-bits=<N>

    Sets  the   initial  window   size  of   HTTP/2  backend
    connection to 2\*\*<N>-1.

    Default: ``16``

.. option:: --backend-http2-connection-window-bits=<N>

    Sets the  per-connection window  size of  HTTP/2 backend
    connection to 2\*\*<N>-1.

    Default: ``30``

.. option:: --http2-no-cookie-crumbling

    Don't crumble cookie header field.

.. option:: --padding=<N>

    Add  at most  <N> bytes  to  a HTTP/2  frame payload  as
    padding.  Specify 0 to  disable padding.  This option is
    meant for debugging purpose  and not intended to enhance
    protocol security.

.. option:: --no-server-push

    Disable HTTP/2 server push.  Server push is supported by
    default mode and HTTP/2  frontend via Link header field.
    It is  also supported if  both frontend and  backend are
    HTTP/2 in default mode.  In  this case, server push from
    backend session is relayed  to frontend, and server push
    via Link header field  is also supported.  SPDY frontend
    does not support server push.


Mode
~~~~

.. describe:: (default mode)

    
    Accept HTTP/2, SPDY and HTTP/1.1 over SSL/TLS.  "no-tls"
    parameter is  used in  :option:`--frontend` option,  accept HTTP/2
    and HTTP/1.1 over cleartext  TCP.  The incoming HTTP/1.1
    connection  can  be  upgraded  to  HTTP/2  through  HTTP
    Upgrade.

.. option:: -s, --http2-proxy

    Like default mode, but enable forward proxy.  This is so
    called HTTP/2 proxy mode.


Logging
~~~~~~~

.. option:: -L, --log-level=<LEVEL>

    Set the severity  level of log output.   <LEVEL> must be
    one of INFO, NOTICE, WARN, ERROR and FATAL.

    Default: ``NOTICE``

.. option:: --accesslog-file=<PATH>

    Set path to write access log.  To reopen file, send USR1
    signal to nghttpx.

.. option:: --accesslog-syslog

    Send  access log  to syslog.   If this  option is  used,
    :option:`--accesslog-file` option is ignored.

.. option:: --accesslog-format=<FORMAT>

    Specify  format  string  for access  log.   The  default
    format is combined format.   The following variables are
    available:

    * $remote_addr: client IP address.
    * $time_local: local time in Common Log format.
    * $time_iso8601: local time in ISO 8601 format.
    * $request: HTTP request line.
    * $status: HTTP response status code.
    * $body_bytes_sent: the  number of bytes sent  to client
      as response body.
    * $http_<VAR>: value of HTTP  request header <VAR> where
      '_' in <VAR> is replaced with '-'.
    * $remote_port: client  port.
    * $server_port: server port.
    * $request_time: request processing time in seconds with
      milliseconds resolution.
    * $pid: PID of the running process.
    * $alpn: ALPN identifier of the protocol which generates
      the response.   For HTTP/1,  ALPN is  always http/1.1,
      regardless of minor version.
    * $ssl_cipher: cipher used for SSL/TLS connection.
    * $ssl_protocol: protocol for SSL/TLS connection.
    * $ssl_session_id: session ID for SSL/TLS connection.
    * $ssl_session_reused:  "r"   if  SSL/TLS   session  was
      reused.  Otherwise, "."

    The  variable  can  be  enclosed  by  "{"  and  "}"  for
    disambiguation (e.g., ${remote_addr}).


    Default: ``$remote_addr - - [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent"``

.. option:: --errorlog-file=<PATH>

    Set path to write error  log.  To reopen file, send USR1
    signal  to nghttpx.   stderr will  be redirected  to the
    error log file unless :option:`--errorlog-syslog` is used.

    Default: ``/dev/stderr``

.. option:: --errorlog-syslog

    Send  error log  to  syslog.  If  this  option is  used,
    :option:`--errorlog-file` option is ignored.

.. option:: --syslog-facility=<FACILITY>

    Set syslog facility to <FACILITY>.

    Default: ``daemon``


HTTP
~~~~

.. option:: --add-x-forwarded-for

    Append  X-Forwarded-For header  field to  the downstream
    request.

.. option:: --strip-incoming-x-forwarded-for

    Strip X-Forwarded-For  header field from  inbound client
    requests.

.. option:: --add-forwarded=<LIST>

    Append RFC  7239 Forwarded header field  with parameters
    specified in comma delimited list <LIST>.  The supported
    parameters  are "by",  "for", "host",  and "proto".   By
    default,  the value  of  "by" and  "for" parameters  are
    obfuscated     string.     See     :option:`--forwarded-by`    and
    :option:`--forwarded-for` options respectively.  Note that nghttpx
    does  not  translate non-standard  X-Forwarded-\*  header
    fields into Forwarded header field, and vice versa.

.. option:: --strip-incoming-forwarded

    Strip  Forwarded   header  field  from   inbound  client
    requests.

.. option:: --forwarded-by=(obfuscated|ip|<VALUE>)

    Specify the parameter value sent out with "by" parameter
    of Forwarded  header field.   If "obfuscated"  is given,
    the string is randomly generated at startup.  If "ip" is
    given,   the  interface   address  of   the  connection,
    including port number, is  sent with "by" parameter.  In
    case of UNIX domain  socket, "localhost" is used instead
    of address and  port.  User can also  specify the static
    obfuscated string.  The limitation is that it must start
    with   "_",  and   only   consists   of  character   set
    [A-Za-z0-9._-], as described in RFC 7239.

    Default: ``obfuscated``

.. option:: --forwarded-for=(obfuscated|ip)

    Specify  the   parameter  value  sent  out   with  "for"
    parameter of Forwarded header field.  If "obfuscated" is
    given, the string is  randomly generated for each client
    connection.  If "ip" is given, the remote client address
    of  the connection,  without port  number, is  sent with
    "for"  parameter.   In  case   of  UNIX  domain  socket,
    "localhost" is used instead of address.

    Default: ``obfuscated``

.. option:: --no-via

    Don't append to  Via header field.  If  Via header field
    is received, it is left unaltered.

.. option:: --no-location-rewrite

    Don't  rewrite location  header field  in default  mode.
    When :option:`--http2-proxy`  is used, location header  field will
    not be altered regardless of this option.

.. option:: --host-rewrite

    Rewrite  host and  :authority header  fields in  default
    mode.  When  :option:`--http2-proxy` is  used, these  headers will
    not be altered regardless of this option.

.. option:: --altsvc=<PROTOID,PORT[,HOST,[ORIGIN]]>

    Specify   protocol  ID,   port,  host   and  origin   of
    alternative service.  <HOST>  and <ORIGIN> are optional.
    They  are advertised  in  alt-svc header  field only  in
    HTTP/1.1  frontend.  This  option can  be used  multiple
    times   to   specify  multiple   alternative   services.
    Example: :option:`--altsvc`\=h2,443

.. option:: --add-request-header=<HEADER>

    Specify additional header field to add to request header
    set.  This  option just  appends header field  and won't
    replace anything  already set.  This option  can be used
    several  times   to  specify  multiple   header  fields.
    Example: :option:`--add-request-header`\="foo: bar"

.. option:: --add-response-header=<HEADER>

    Specify  additional  header  field to  add  to  response
    header set.   This option just appends  header field and
    won't replace anything already  set.  This option can be
    used several  times to  specify multiple  header fields.
    Example: :option:`--add-response-header`\="foo: bar"

.. option:: --request-header-field-buffer=<SIZE>

    Set maximum buffer size for incoming HTTP request header
    field list.  This is the sum of header name and value in
    bytes.   If  trailer  fields  exist,  they  are  counted
    towards this number.

    Default: ``64K``

.. option:: --max-request-header-fields=<N>

    Set  maximum  number  of incoming  HTTP  request  header
    fields.   If  trailer  fields exist,  they  are  counted
    towards this number.

    Default: ``100``

.. option:: --response-header-field-buffer=<SIZE>

    Set  maximum  buffer  size for  incoming  HTTP  response
    header field list.   This is the sum of  header name and
    value  in  bytes.  If  trailer  fields  exist, they  are
    counted towards this number.

    Default: ``64K``

.. option:: --max-response-header-fields=<N>

    Set  maximum number  of  incoming  HTTP response  header
    fields.   If  trailer  fields exist,  they  are  counted
    towards this number.

    Default: ``500``

.. option:: --error-page=(<CODE>|*)=<PATH>

    Set file path  to custom error page  served when nghttpx
    originally  generates  HTTP  error status  code  <CODE>.
    <CODE> must be greater than or equal to 400, and at most
    599.  If "*"  is used instead of <CODE>,  it matches all
    HTTP  status  code.  If  error  status  code comes  from
    backend server, the custom error pages are not used.


Debug
~~~~~

.. option:: --frontend-http2-dump-request-header=<PATH>

    Dumps request headers received by HTTP/2 frontend to the
    file denoted  in <PATH>.  The  output is done  in HTTP/1
    header field format and each header block is followed by
    an empty line.  This option  is not thread safe and MUST
    NOT be used with option :option:`-n`\<N>, where <N> >= 2.

.. option:: --frontend-http2-dump-response-header=<PATH>

    Dumps response headers sent  from HTTP/2 frontend to the
    file denoted  in <PATH>.  The  output is done  in HTTP/1
    header field format and each header block is followed by
    an empty line.  This option  is not thread safe and MUST
    NOT be used with option :option:`-n`\<N>, where <N> >= 2.

.. option:: -o, --frontend-frame-debug

    Print HTTP/2 frames in  frontend to stderr.  This option
    is  not thread  safe and  MUST NOT  be used  with option
    :option:`-n`\=N, where N >= 2.


Process
~~~~~~~

.. option:: -D, --daemon

    Run in a background.  If :option:`-D` is used, the current working
    directory is changed to '*/*'.

.. option:: --pid-file=<PATH>

    Set path to save PID of this program.

.. option:: --user=<USER>

    Run this program as <USER>.   This option is intended to
    be used to drop root privileges.


Scripting
~~~~~~~~~

.. option:: --mruby-file=<PATH>

    Set mruby script file


Misc
~~~~

.. option:: --conf=<PATH>

    Load configuration from <PATH>.

    Default: ``/etc/nghttpx/nghttpx.conf``

.. option:: --include=<PATH>

    Load additional configurations from <PATH>.  File <PATH>
    is  read  when  configuration  parser  encountered  this
    option.  This option can be used multiple times, or even
    recursively.

.. option:: -v, --version

    Print version and exit.

.. option:: -h, --help

    Print this help and exit.



The <SIZE> argument is an integer and an optional unit (e.g., 10K is
10 * 1024).  Units are K, M and G (powers of 1024).

The <DURATION> argument is an integer and an optional unit (e.g., 1s
is 1 second and 500ms is 500 milliseconds).  Units are h, m, s or ms
(hours, minutes, seconds and milliseconds, respectively).  If a unit
is omitted, a second is used as unit.

FILES
-----

*/etc/nghttpx/nghttpx.conf*
  The default configuration file path nghttpx searches at startup.
  The configuration file path can be changed using :option:`--conf`
  option.

  Those lines which are staring ``#`` are treated as comment.

  The option name in the configuration file is the long command-line
  option name with leading ``--`` stripped (e.g., ``frontend``).  Put
  ``=`` between option name and value.  Don't put extra leading or
  trailing spaces.

  When specifying arguments including characters which have special
  meaning to a shell, we usually use quotes so that shell does not
  interpret them.  When writing this configuration file, quotes for
  this purpose must not be used.  For example, specify additional
  request header field, do this:

  .. code-block:: text

    add-request-header=foo: bar

  instead of:

  .. code-block:: text

    add-request-header="foo: bar"

  The options which do not take argument in the command-line *take*
  argument in the configuration file.  Specify ``yes`` as an argument
  (e.g., ``http2-proxy=yes``).  If other string is given, it is
  ignored.

  To specify private key and certificate file which are given as
  positional arguments in command-line, use ``private-key-file`` and
  ``certificate-file``.

  :option:`--conf` option cannot be used in the configuration file and
  will be ignored if specified.

SIGNALS
-------

SIGQUIT
  Shutdown gracefully.  First accept pending connections and stop
  accepting connection.  After all connections are handled, nghttpx
  exits.

SIGUSR1
  Reopen log files.

SIGUSR2
  Fork and execute nghttpx.  It will execute the binary in the same
  path with same command-line arguments and environment variables.
  After new process comes up, sending SIGQUIT to the original process
  to perform hot swapping.

.. note::

  nghttpx consists of multiple processes: one process for processing
  these signals, and another one for processing requests.  The former
  spawns the latter.  The former is called master process, and the
  latter is called worker process.  If neverbleed is enabled, the
  worker process spawns neverbleed daemon process which does RSA key
  processing.  The above signal must be sent to the master process.
  If the other processes received one of them, it is ignored.  This
  behaviour of these processes may change in the future release.  In
  other words, in the future release, the processes other than master
  process may terminate upon the reception of these signals.
  Therefore these signals should not be sent to the processes other
  than master process.

SERVER PUSH
-----------

nghttpx supports HTTP/2 server push in default mode with Link header
field.  nghttpx looks for Link header field (`RFC 5988
<http://tools.ietf.org/html/rfc5988>`_) in response headers from
backend server and extracts URI-reference with parameter
``rel=preload`` (see `preload
<http://w3c.github.io/preload/#interoperability-with-http-link-header>`_)
and pushes those URIs to the frontend client. Here is a sample Link
header field to initiate server push:

.. code-block:: http

  Link: </fonts/font.woff>; rel=preload
  Link: </css/theme.css>; rel=preload

Currently, the following restriction is applied for server push:

1. The associated stream must have method "GET" or "POST".  The
   associated stream's status code must be 200.

This limitation may be loosened in the future release.

nghttpx also supports server push if both frontend and backend are
HTTP/2 in default mode.  In this case, in addition to server push via
Link header field, server push from backend is forwarded to frontend
HTTP/2 session.

HTTP/2 server push will be disabled if :option:`--http2-proxy` is
used.

UNIX DOMAIN SOCKET
------------------

nghttpx supports UNIX domain socket with a filename for both frontend
and backend connections.

Please note that current nghttpx implementation does not delete a
socket with a filename.  And on start up, if nghttpx detects that the
specified socket already exists in the file system, nghttpx first
deletes it.  However, if SIGUSR2 is used to execute new binary and
both old and new configurations use same filename, new binary does not
delete the socket and continues to use it.

OCSP STAPLING
-------------

OCSP query is done using external Python script
``fetch-ocsp-response``, which has been originally developed in Perl
as part of h2o project (https://github.com/h2o/h2o), and was
translated into Python.

The script file is usually installed under
``$(prefix)/share/nghttp2/`` directory.  The actual path to script can
be customized using :option:`--fetch-ocsp-response-file` option.

If OCSP query is failed, previous OCSP response, if any, is continued
to be used.

TLS SESSION RESUMPTION
----------------------

nghttpx supports TLS session resumption through both session ID and
session ticket.

SESSION ID RESUMPTION
~~~~~~~~~~~~~~~~~~~~~

By default, session ID is shared by all worker threads.

If :option:`--tls-session-cache-memcached` is given, nghttpx will
insert serialized session data to memcached with
``nghttpx:tls-session-cache:`` + lowercased hex string of session ID
as a memcached entry key, with expiry time 12 hours.  Session timeout
is set to 12 hours.

By default, connections to memcached server are not encrypted.  To
enable encryption, use ``tls`` keyword in
:option:`--tls-session-cache-memcached` option.

TLS SESSION TICKET RESUMPTION
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

By default, session ticket is shared by all worker threads.  The
automatic key rotation is also enabled by default.  Every an hour, new
encryption key is generated, and previous encryption key becomes
decryption only key.  We set session timeout to 12 hours, and thus we
keep at most 12 keys.

If :option:`--tls-ticket-key-memcached` is given, encryption keys are
retrieved from memcached.  nghttpx just reads keys from memcached; one
has to deploy key generator program to update keys frequently (e.g.,
every 1 hour).  The example key generator tlsticketupdate.go is
available under contrib directory in nghttp2 archive.  The memcached
entry key is ``nghttpx:tls-ticket-key``.  The data format stored in
memcached is the binary format described below:

.. code-block:: text

    +--------------+-------+----------------+
    | VERSION (4)  |LEN (2)|KEY(48 or 80) ...
    +--------------+-------+----------------+
                   ^                        |
		   |                        |
		   +------------------------+
                   (LEN, KEY) pair can be repeated

All numbers in the above figure is bytes.  All integer fields are
network byte order.

First 4 bytes integer VERSION field, which must be 1.  The 2 bytes
integer LEN field gives the length of following KEY field, which
contains key.  If :option:`--tls-ticket-key-cipher`\=aes-128-cbc is
used, LEN must be 48.  If
:option:`--tls-ticket-key-cipher`\=aes-256-cbc is used, LEN must be
80.  LEN and KEY pair can be repeated multiple times to store multiple
keys.  The key appeared first is used as encryption key.  All the
remaining keys are used as decryption only.

By default, connections to memcached server are not encrypted.  To
enable encryption, use ``tls`` keyword in
:option:`--tls-ticket-key-memcached` option.

If :option:`--tls-ticket-key-file` is given, encryption key is read
from the given file.  In this case, nghttpx does not rotate key
automatically.  To rotate key, one has to restart nghttpx (see
SIGNALS).

MRUBY SCRIPTING
---------------

.. warning::

  The current mruby extension API is experimental and not frozen.  The
  API is subject to change in the future release.

nghttpx allows users to extend its capability using mruby scripts.
nghttpx has 2 hook points to execute mruby script: request phase and
response phase.  The request phase hook is invoked after all request
header fields are received from client.  The response phase hook is
invoked after all response header fields are received from backend
server.  These hooks allows users to modify header fields, or common
HTTP variables, like authority or request path, and even return custom
response without forwarding request to backend servers.

To specify mruby script file, use :option:`--mruby-file` option.  The
script will be evaluated once per thread on startup, and it must
instantiate object and evaluate it as the return value (e.g.,
``App.new``).  This object is called app object.  If app object
defines ``on_req`` method, it is called with :rb:class:`Nghttpx::Env`
object on request hook.  Similarly, if app object defines ``on_resp``
method, it is called with :rb:class:`Nghttpx::Env` object on response
hook.  For each method invocation, user can can access
:rb:class:`Nghttpx::Request` and :rb:class:`Nghttpx::Response` objects
via :rb:attr:`Nghttpx::Env#req` and :rb:attr:`Nghttpx::Env#resp`
respectively.

.. rb:module:: Nghttpx

.. rb:const:: REQUEST_PHASE

    Constant to represent request phase.

.. rb:const:: RESPONSE_PHASE

    Constant to represent response phase.

.. rb:class:: Env

    Object to represent current request specific context.

    .. rb:attr_reader:: req

        Return :rb:class:`Request` object.

    .. rb:attr_reader:: resp

        Return :rb:class:`Response` object.

    .. rb:attr_reader:: ctx

        Return Ruby hash object.  It persists until request finishes.
        So values set in request phase hoo can be retrieved in
        response phase hook.

    .. rb:attr_reader:: phase

        Return the current phase.

    .. rb:attr_reader:: remote_addr

        Return IP address of a remote client.  If connection is made
        via UNIX domain socket, this returns the string "localhost".

    .. rb:attr_reader:: server_addr

        Return address of server that accepted the connection.  This
	is a string which specified in :option:`--frontend` option,
	excluding port number, and not a resolved IP address.  For
	UNIX domain socket, this is a path to UNIX domain socket.

    .. rb:attr_reader:: server_port

        Return port number of the server frontend which accepted the
        connection from client.

    .. rb:attr_reader:: tls_used

        Return true if TLS is used on the connection.

.. rb:class:: Request

    Object to represent request from client.  The modification to
    Request object is allowed only in request phase hook.

    .. rb:attr_reader:: http_version_major

        Return HTTP major version.

    .. rb:attr_reader:: http_version_minor

        Return HTTP minor version.

    .. rb:attr_accessor:: method

        HTTP method.  On assignment, copy of given value is assigned.
        We don't accept arbitrary method name.  We will document them
        later, but well known methods, like GET, PUT and POST, are all
        supported.

    .. rb:attr_accessor:: authority

        Authority (i.e., example.org), including optional port
        component .  On assignment, copy of given value is assigned.

    .. rb:attr_accessor:: scheme

        Scheme (i.e., http, https).  On assignment, copy of given
        value is assigned.

    .. rb:attr_accessor:: path

        Request path, including query component (i.e., /index.html).
        On assignment, copy of given value is assigned.  The path does
        not include authority component of URI.  This may include
        query component.  nghttpx makes certain normalization for
        path.  It decodes percent-encoding for unreserved characters
        (see https://tools.ietf.org/html/rfc3986#section-2.3), and
        resolves ".." and ".".  But it may leave characters which
        should be percent-encoded as is. So be careful when comparing
        path against desired string.

    .. rb:attr_reader:: headers

        Return Ruby hash containing copy of request header fields.
        Changing values in returned hash does not change request
        header fields actually used in request processing.  Use
        :rb:meth:`Nghttpx::Request#add_header` or
        :rb:meth:`Nghttpx::Request#set_header` to change request
        header fields.

    .. rb:method:: add_header(key, value)

        Add header entry associated with key.  The value can be single
        string or array of string.  It does not replace any existing
        values associated with key.

    .. rb:method:: set_header(key, value)

        Set header entry associated with key.  The value can be single
        string or array of string.  It replaces any existing values
        associated with key.

    .. rb:method:: clear_headers

        Clear all existing request header fields.

    .. rb:method:: push(uri)

        Initiate to push resource identified by *uri*.  Only HTTP/2
        protocol supports this feature.  For the other protocols, this
        method is noop.  *uri* can be absolute URI, absolute path or
        relative path to the current request.  For absolute or
        relative path, scheme and authority are inherited from the
        current request.  Currently, method is always GET.  nghttpx
        will issue request to backend servers to fulfill this request.
        The request and response phase hooks will be called for pushed
        resource as well.

.. rb:class:: Response

    Object to represent response from backend server.

    .. rb:attr_reader:: http_version_major

        Return HTTP major version.

    .. rb:attr_reader:: http_version_minor

        Return HTTP minor version.

    .. rb:attr_accessor:: status

        HTTP status code.  It must be in the range [200, 999],
        inclusive.  The non-final status code is not supported in
        mruby scripting at the moment.

    .. rb:attr_reader:: headers

        Return Ruby hash containing copy of response header fields.
        Changing values in returned hash does not change response
        header fields actually used in response processing.  Use
        :rb:meth:`Nghttpx::Response#add_header` or
        :rb:meth:`Nghttpx::Response#set_header` to change response
        header fields.

    .. rb:method:: add_header(key, value)

        Add header entry associated with key.  The value can be single
        string or array of string.  It does not replace any existing
        values associated with key.

    .. rb:method:: set_header(key, value)

        Set header entry associated with key.  The value can be single
        string or array of string.  It replaces any existing values
        associated with key.

    .. rb:method:: clear_headers

        Clear all existing response header fields.

    .. rb:method:: return(body)

        Return custom response *body* to a client.  When this method
        is called in request phase hook, the request is not forwarded
        to the backend, and response phase hook for this request will
        not be invoked.  When this method is called in response phase
        hook, response from backend server is canceled and discarded.
        The status code and response header fields should be set
        before using this method.  To set status code, use :rb:meth To
        set response header fields, use
        :rb:attr:`Nghttpx::Response#status`.  If status code is not
        set, 200 is used.  :rb:meth:`Nghttpx::Response#add_header` and
        :rb:meth:`Nghttpx::Response#set_header`.  When this method is
        invoked in response phase hook, the response headers are
        filled with the ones received from backend server.  To send
        completely custom header fields, first call
        :rb:meth:`Nghttpx::Response#clear_headers` to erase all
        existing header fields, and then add required header fields.
        It is an error to call this method twice for a given request.

MRUBY EXAMPLES
~~~~~~~~~~~~~~

Modify request path:

.. code-block:: ruby

    class App
      def on_req(env)
        env.req.path = "/apps#{env.req.path}"
      end
    end

    App.new

Don't forget to instantiate and evaluate object at the last line.

Restrict permission of viewing a content to a specific client
addresses:

.. code-block:: ruby

    class App
      def on_req(env)
        allowed_clients = ["127.0.0.1", "::1"]

        if env.req.path.start_with?("/log/") &&
           !allowed_clients.include?(env.remote_addr) then
          env.resp.status = 404
          env.resp.return "permission denied"
        end
      end
    end

    App.new

SEE ALSO
--------

:manpage:`nghttp(1)`, :manpage:`nghttpd(1)`, :manpage:`h2load(1)`