nghttp2/doc/nghttpx.1.rst

.. DO NOT MODIFY THIS FILE!  It was generated by man2rst.py

.. program:: nghttpx

nghttpx(1)
==========

NAME
----
nghttpx - HTTP/2 experimental proxy

SYNOPSIS
--------
**nghttpx** [OPTIONS]... [<PRIVATE_KEY> <CERT>]

DESCRIPTION
-----------
A reverse proxy for HTTP/2, HTTP/1 and SPDY.

.. option:: PRIVATE_KEY

    Set  path  to  server's  private  key.   Required
    unless  :option:`-p`,  :option:`--client`  or  :option:`--frontend-no-tls`  are
    given.

.. option:: CERT

    Set  path  to   server's  certificate.   Required
    unless  :option:`-p`,  :option:`--client`  or  :option:`--frontend-no-tls`  are
    given.

OPTIONS
-------

The options are categorized into several groups.

Connections
^^^^^^^^^^^

.. option:: -b, --backend=<HOST,PORT>

    
    Set backend  host and port.  For  HTTP/1 backend,
    multiple  backend   addresses  are   accepted  by
    repeating this  option.  HTTP/2 backend  does not
    support multiple backend  addresses and the first
    occurrence of this option is used.
    Default: '127.0.0.1,80'

.. option:: -f, --frontend=<HOST,PORT>

    
    Set frontend host and port.  If <HOST> is '\*', it
    assumes  all addresses  including  both IPv4  and
    IPv6.
    Default: '\*,3000'

.. option:: --backlog=<NUM>

    
    Set  listen  backlog  size.    If  -1  is  given,
    libevent will choose suitable value.
    Default: 128

.. option:: --backend-ipv4

    
    Resolve backend hostname to IPv4 address only.

.. option:: --backend-ipv6

    
    Resolve backend hostname to IPv6 address only.

.. option:: --backend-http-proxy-uri=<URI>

    
    Specify     proxy     URI     in     the     form
    http://[<USER>:<PASS>@]<PROXY>:<PORT>.     If   a
    proxy requires authentication, specify <USER> and
    <PASS>.    Note  that   they  must   be  properly
    percent-encoded.   This proxy  is  used when  the
    backend  connection  is  HTTP/2.  First,  make  a
    CONNECT request  to the proxy and  it connects to
    the  backend on  behalf of  nghttpx.  This  forms
    tunnel.   After  that, nghttpx  performs  SSL/TLS
    handshake with the downstream through the tunnel.
    The timeouts  when connecting and  making CONNECT
    request       can      be       specified      by
    :option:`--backend-read-timeout`                        and
    :option:`--backend-write-timeout` options.

Performance
^^^^^^^^^^^

.. option:: -n, --workers=<CORES>

    
    Set the number of worker threads.
    Default: 1

.. option:: --read-rate=<RATE>

    
    Set  maximum   average  read  rate   on  frontend
    connection.  Setting 0 to  this option means read
    rate is unlimited.
    Default: 0

.. option:: --read-burst=<SIZE>

    
    Set   maximum  read   burst   size  on   frontend
    connection.  Setting 0 to  this option means read
    burst size is unlimited.
    Default: 0

.. option:: --write-rate=<RATE>

    
    Set  maximum  average   write  rate  on  frontend
    connection.  Setting 0 to this option means write
    rate is unlimited.
    Default: 0

.. option:: --write-burst=<SIZE>

    
    Set   maximum  write   burst  size   on  frontend
    connection.  Setting 0 to this option means write
    burst size is unlimited.
    Default: 0

.. option:: --worker-read-rate=<RATE>

    
    Set  maximum   average  read  rate   on  frontend
    connection per worker.  Setting  0 to this option
    means  read rate  is unlimited.   Not implemented
    yet.
    Default: 0

.. option:: --worker-read-burst=<SIZE>

    
    Set   maximum  read   burst   size  on   frontend
    connection per worker.  Setting  0 to this option
    means   read  burst   size  is   unlimited.   Not
    implemented yet.
    Default: 0

.. option:: --worker-write-rate=<RATE>

    
    Set  maximum  average   write  rate  on  frontend
    connection per worker.  Setting  0 to this option
    means write  rate is unlimited.   Not implemented
    yet.
    Default: 0

.. option:: --worker-write-burst=<SIZE>

    
    Set   maximum  write   burst  size   on  frontend
    connection per worker.  Setting  0 to this option
    means  write   burst  size  is   unlimited.   Not
    implemented yet.
    Default: 0

.. option:: --worker-frontend-connections=<NUM>

    
    Set  maximum number  of simultaneous  connections
    frontend accepts.  Setting 0 means unlimited.
    Default: 0

.. option:: --backend-http1-connections-per-host=<NUM>

    
    Set maximum  number of backend  concurrent HTTP/1
    connections per host.   This option is meaningful
    when :option:`-s` option  is used.  To limit  the number of
    connections  per frontend  for default  mode, use
    :option:`--backend-http1-connections-per-frontend`.
    Default: 8

.. option:: --backend-http1-connections-per-frontend=<NUM>

    
    Set maximum  number of backend  concurrent HTTP/1
    connections  per frontend.   This option  is only
    used for  default mode.   0 means  unlimited.  To
    limit  the number  of  connections  per host  for
    HTTP/2  or  SPDY  proxy  mode  (:option:`-s`  option),  use
    :option:`--backend-http1-connections-per-host`.
    Default: 0

Timeout
^^^^^^^

.. option:: --frontend-http2-read-timeout=<SEC>

    
    Specify read timeout for HTTP/2 and SPDY frontend
    connection.
    Default: 180

.. option:: --frontend-read-timeout=<SEC>

    
    Specify  read   timeout  for   HTTP/1.1  frontend
    connection.
    Default: 180

.. option:: --frontend-write-timeout=<SEC>

    
    Specify   write   timeout    for   all   frontend
    connections.
    Default: 30

.. option:: --stream-read-timeout=<SEC>

    
    Specify read timeout for HTTP/2 and SPDY streams.
    0 means no timeout.
    Default: 0

.. option:: --stream-write-timeout=<SEC>

    
    Specify  write   timeout  for  HTTP/2   and  SPDY
    streams.  0 means no timeout.
    Default: 0

.. option:: --backend-read-timeout=<SEC>

    
    Specify read timeout for backend connection.
    Default: 180

.. option:: --backend-write-timeout=<SEC>

    
    Specify write timeout for backend connection.
    Default: 30

.. option:: --backend-keep-alive-timeout=<SEC>

    
    Specify    keep-alive    timeout   for    backend
    connection.
    Default: 600

.. option:: --listener-disable-timeout=<SEC>

    
    After  accepting  connection  failed,  connection
    listener is disabled for a given time in seconds.
    Specifying 0 disables this feature.
    Default: 0

SSL/TLS
^^^^^^^

.. option:: --ciphers=<SUITE>

    
    Set  allowed  cipher  list.  The  format  of  the
    string  is described  in OpenSSL  ciphers(1).

.. option:: -k, --insecure

    
    Don't verify backend  server's certificate if :option:`-p`,
    :option:`--client`   or   :option:`--http2-bridge`  are   given   and
    :option:`--backend-no-tls` is not given.

.. option:: --cacert=<PATH>

    
    Set path  to trusted  CA certificate file  if :option:`-p`,
    :option:`--client`   or   :option:`--http2-bridge`  are   given   and
    :option:`--backend-no-tls` is not given.   The file must be
    in   PEM  format.    It   can  contain   multiple
    certificates.    If   the   linked   OpenSSL   is
    configured to load system wide certificates, they
    are loaded at startup regardless of this option.

.. option:: --private-key-passwd-file=<FILEPATH>

    
    Path  to  file  that contains  password  for  the
    server's private  key.  If none is  given and the
    private  key  is   password  protected  it'll  be
    requested interactively.

.. option:: --subcert=<KEYPATH>:<CERTPATH>

    
    Specify  additional certificate  and private  key
    file.  nghttpx will  choose certificates based on
    the hostname  indicated by  client using  TLS SNI
    extension.   This  option  can be  used  multiple
    times.

.. option:: --backend-tls-sni-field=<HOST>

    
    Explicitly  set  the  content   of  the  TLS  SNI
    extension.  This will default to the backend HOST
    name.

.. option:: --dh-param-file=<PATH>

    
    Path to  file that contains DH  parameters in PEM
    format.  Without  this option, DHE  cipher suites
    are not available.

.. option:: --npn-list=<LIST>

    
    Comma delimited list  of ALPN protocol identifier
    sorted in  the order  of preference.   That means
    most  desirable protocol  comes  first.  This  is
    used in both ALPN and NPN.  The parameter must be
    delimited by  a single  comma only and  any white
    spaces are treated as a part of protocol string.
    Default: h2-16,h2-14,spdy/3.1,http/1.1

.. option:: --verify-client

    
    Require and verify client certificate.

.. option:: --verify-client-cacert=<PATH>

    
    Path  to file  that contains  CA certificates  to
    verify client  certificate.  The file must  be in
    PEM    format.    It    can   contain    multiple
    certificates.

.. option:: --client-private-key-file=<PATH>

    
    Path  to file  that contains  client private  key
    used in backend client authentication.

.. option:: --client-cert-file=<PATH>

    
    Path  to file  that  contains client  certificate
    used in backend client authentication.

.. option:: --tls-proto-list=<LIST>

    
    Comma delimited  list of  SSL/TLS protocol  to be
    enabled.  The following  protocols are available:
    TLSv1.2, TLSv1.1 and  TLSv1.0.  The name matching
    is   done   in  case-insensitive   manner.    The
    parameter  must be  delimited by  a single  comma
    only and any  white spaces are treated  as a part
    of protocol string.
    Default: TLSv1.2,TLSv1.1

HTTP/2 and SPDY
^^^^^^^^^^^^^^^

.. option:: -c, --http2-max-concurrent-streams=<NUM>

    
    Set the maximum number  of the concurrent streams
    in one HTTP/2 and SPDY session.
    Default: 100

.. option:: --frontend-http2-window-bits=<N>

    
    Sets the per-stream initial window size of HTTP/2
    SPDY frontend  connection.  For HTTP/2,  the size
    is 2\*\*<N>-1.  For SPDY, the size is 2\*\*<N>.
    Default: 16

.. option:: --frontend-http2-connection-window-bits=<N>

    
    Sets the per-connection window size of HTTP/2 and
    SPDY frontend  connection.  For HTTP/2,  the size
    is 2\*\*<N>-1. For SPDY, the size is 2\*\*<N>.
    Default: 16

.. option:: --frontend-no-tls

    
    Disable SSL/TLS on frontend connections.

.. option:: --backend-http2-window-bits=<N>

    
    Sets the  initial window  size of  HTTP/2 backend
    connection to 2\*\*<N>-1.
    Default: 16

.. option:: --backend-http2-connection-window-bits=<N>

    
    Sets  the per-connection  window  size of  HTTP/2
    backend connection to 2\*\*<N>-1.
    Default: 16

.. option:: --backend-no-tls

    
    Disable SSL/TLS on backend connections.

.. option:: --http2-no-cookie-crumbling

    
    Don't crumble cookie header field.

.. option:: --padding=<N>

    
    Add at most  <N> bytes to a  HTTP/2 frame payload
    as padding.  Specify 0  to disable padding.  This
    option  is meant  for debugging  purpose and  not
    intended to enhance protocol security.

Mode
^^^^

.. describe:: (default mode)

    Accept  HTTP/2, SPDY  and HTTP/1.1  over SSL/TLS.
    If :option:`--frontend-no-tls`  is used, accept  HTTP/2 and
    HTTP/1.1.  The  incoming HTTP/1.1  connection can
    be upgraded to HTTP/2  through HTTP Upgrade.  The
    protocol to the backend is HTTP/1.1.

.. option:: -s, --http2-proxy

    
    Like default mode, but enable secure proxy mode.

.. option:: --http2-bridge

    
    Like  default  mode,  but  communicate  with  the
    backend  in   HTTP/2  over  SSL/TLS.    Thus  the
    incoming all connections  are converted to HTTP/2
    connection  and  relayed  to  the  backend.   See
    :option:`--backend-http-proxy-uri` option if you are behind
    the  proxy and  want  to connect  to the  outside
    HTTP/2 proxy.

.. option:: --client

    
    Accept HTTP/2 and  HTTP/1.1 without SSL/TLS.  The
    incoming HTTP/1.1  connection can be  upgraded to
    HTTP/2  connection  through  HTTP  Upgrade.   The
    protocol  to  the  backend  is  HTTP/2.   To  use
    nghttpx  as  a  forward   proxy,  use  :option:`-p`  option
    instead.

.. option:: -p, --client-proxy

    
    Like :option:`--client`  option, but  it also  requires the
    request path  from frontend  must be  an absolute
    URI, suitable for use as a forward proxy.

Logging
^^^^^^^

.. option:: -L, --log-level=<LEVEL>

    
    Set the  severity level  of log  output.  <LEVEL>
    must  be one  of  INFO, NOTICE,  WARN, ERROR  and
    FATAL.
    Default: NOTICE

.. option:: --accesslog-file=<PATH>

    
    Set path  to write  access log.  To  reopen file,
    send USR1 signal to nghttpx.

.. option:: --accesslog-syslog

    
    Send  access log  to syslog.   If this  option is
    used, :option:`--access-file` option is ignored.

.. option:: --accesslog-format=<FORMAT>

    
    Specify  format  string   for  access  log.   The
    default format is combined format.  The following
    variables are available:
    $remote_addr: client IP address.
    $time_local: local time in Common Log format.
    $time_iso8601: local time in ISO 8601 format.
    $request: HTTP request line.
    $status: HTTP response status code.
    $body_bytes_sent: the  number of bytes  sent to
    client as response body.
    $http_<VAR>: value of HTTP request header <VAR>
    where '_' in <VAR> is replaced with '-'.
    $remote_port: client  port.
    $server_port: server port.
    $request_time:   request  processing   time  in
    seconds with milliseconds resolution.
    $pid: PID of the running process.
    $alpn:  ALPN  identifier  of the  protocol  which
    generates  the  response.   For HTTP/1,  ALPN  is
    always http/1.1, regardless of minor version.
    Default: $remote_addr - - [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent"

.. option:: --errorlog-file=<PATH>

    
    Set  path to  write error  log.  To  reopen file,
    send USR1 signal to nghttpx.
    Default: /dev/stderr

.. option:: --errorlog-syslog

    
    Send  error log  to  syslog.  If  this option  is
    used, :option:`--errorlog-file` option is ignored.

.. option:: --syslog-facility=<FACILITY>

    
    Set syslog facility to <FACILITY>.
    Default: daemon

Misc
^^^^

.. option:: --add-x-forwarded-for

    
    Append  X-Forwarded-For   header  field   to  the
    downstream request.

.. option:: --strip-incoming-x-forwarded-for

    
    Strip  X-Forwarded-For  header field from inbound
    client requests.

.. option:: --no-via

    
    Don't append to Via  header field.  If Via header
    field is received, it is left unaltered.

.. option:: --no-location-rewrite

    
    Don't   rewrite   location    header   field   on
    :option:`--http2-bridge`, :option:`--client`  and default  mode.  For
    :option:`--http2-proxy`  and :option:`--client-proxy`  mode, location
    header field  will not  be altered  regardless of
    this option.

.. option:: --altsvc=<PROTOID,PORT[,HOST,[ORIGIN]]>

    
    Specify  protocol ID,  port, host  and origin  of
    alternative  service.   <HOST> and  <ORIGIN>  are
    optional.  They are  advertised in alt-svc header
    field or HTTP/2 ALTSVC frame.  This option can be
    used   multiple   times   to   specify   multiple
    alternative services.  Example: --altsvc=h2,443

.. option:: --add-response-header=<HEADER>

    
    Specify  additional   header  field  to   add  to
    response  header set.   This option  just appends
    header field  and won't replace  anything already
    set.  This  option can  be used several  times to
    specify multiple header fields.
    Example: --add-response-header="foo: bar"

.. option:: --frontend-http2-dump-request-header=<PATH>

    
    Dumps request headers received by HTTP/2 frontend
    to  the file  denoted in  <PATH>.  The  output is
    done  in  HTTP/1  header field  format  and  each
    header block is followed  by an empty line.  This
    option is  not thread safe  and MUST NOT  be used
    with option -n<N>, where <N> >= 2.

.. option:: --frontend-http2-dump-response-header=<PATH>

    
    Dumps response headers  sent from HTTP/2 frontend
    to  the file  denoted in  <PATH>.  The  output is
    done  in  HTTP/1  header field  format  and  each
    header block is followed  by an empty line.  This
    option is  not thread safe  and MUST NOT  be used
    with option -n<N>, where <N> >= 2.

.. option:: -o, --frontend-frame-debug

    
    Print HTTP/2 frames in  frontend to stderr.  This
    option is  not thread safe  and MUST NOT  be used
    with option -n=N, where N >= 2.

.. option:: -D, --daemon

    
    Run in a background.  If  :option:`-D` is used, the current
    working directory is changed to '/'.

.. option:: --pid-file=<PATH>

    
    Set path to save PID of this program.

.. option:: --user=<USER>

    
    Run  this  program  as <USER>.   This  option  is
    intended to be used to drop root privileges.

.. option:: --conf=<PATH>

    
    Load configuration from <PATH>.
    Default: /etc/nghttpx/nghttpx.conf

.. option:: -v, --version

    
    Print version and exit.

.. option:: -h, --help

    
    Print this help and exit.

SEE ALSO
--------

nghttp(1), nghttpd(1), h2load(1)