Correct misspellings in document

README.rst

@@ -13,7 +13,7 @@ An HPACK encoder and decoder are available as a public API.
 
 An experimental high level C++ library is also available.
 
-We have Python bindings of this libary, but we do not have full
+We have Python bindings of this library, but we do not have full
 code coverage yet.
 
 Development Status
@@ -490,7 +490,7 @@ disabled in the frontend and incoming HTTP/1.1 connections can be
 upgraded to HTTP/2 through HTTP Upgrade.
 
 The ``--http2-bridge``, ``--client`` and ``--client-proxy`` modes use
-SSL/TLS in the backend connection by deafult.  To disable SSL/TLS, use
+SSL/TLS in the backend connection by default.  To disable SSL/TLS, use
 the ``--backend-no-tls`` option.
 
 ``nghttpx`` supports a configuration file.  See the ``--conf`` option and
@@ -785,7 +785,7 @@ max_deflate_size
     The maximum header table size the encoder uses.  This can be smaller
     than ``max_size``.  In this case, the encoder only uses up to first
     ``max_deflate_size`` buffer.  Since the header table size is still
-    ``max_size``, the encoder has to keep track of entries ouside the
+    ``max_size``, the encoder has to keep track of entries outside the
     ``max_deflate_size`` but inside the ``max_size`` and make sure
     that they are no longer referenced.
 

doc/h2load.1

@@ -71,7 +71,7 @@ Default: \fB1\fP
 .INDENT 0.0
 .TP
 .B \-i, \-\-input\-file=<FILE>
-Path of a file with multiple URIs are seperated by EOLs.
+Path of a file with multiple URIs are separated by EOLs.
 This option will disable URIs getting from command\-line.
 If \(aq\-\(aq is given as <FILE>, URIs will be read from stdin.
 URIs are used  in this order for each  client.  All URIs

doc/h2load.1.rst

@@ -46,7 +46,7 @@ OPTIONS
 
 .. option:: -i, --input-file=<FILE>
 
-    Path of a file with multiple URIs are seperated by EOLs.
+    Path of a file with multiple URIs are separated by EOLs.
     This option will disable URIs getting from command-line.
     If '-' is given as <FILE>, URIs will be read from stdin.
     URIs are used  in this order for each  client.  All URIs

doc/nghttpx.1

@@ -812,7 +812,7 @@ argument in the configuration file.  Specify \fByes\fP as an argument
 ignored.
 .sp
 To specify private key and certificate file which are given as
-positional arguments in commnad\-line, use \fBprivate\-key\-file\fP and
+positional arguments in command\-line, use \fBprivate\-key\-file\fP and
 \fBcertificate\-file\fP\&.
 .sp
 \fI\%\-\-conf\fP option cannot be used in the configuration file and

doc/nghttpx.1.rst

@@ -727,7 +727,7 @@ FILES
   ignored.
 
   To specify private key and certificate file which are given as
-  positional arguments in commnad-line, use ``private-key-file`` and
+  positional arguments in command-line, use ``private-key-file`` and
   ``certificate-file``.
 
   :option:`--conf` option cannot be used in the configuration file and

doc/sources/h2load-howto.rst

@@ -87,5 +87,5 @@ If multiple URIs are specified, they are used in round robin manner.
 
 .. note::
 
-    Please note that h2load uses sheme, host and port in the first URI
+    Please note that h2load uses scheme, host and port in the first URI
     and ignores those parts in the rest of the URIs.

doc/sources/libnghttp2_asio.rst

@@ -80,7 +80,7 @@ status code, in the above example, which is 200.  The second argument,
 which is omitted in the above example, is additional header fields to
 send.
 
-``nghttp2::asio_http2::server::response::end`` sends responde body.
+``nghttp2::asio_http2::server::response::end`` sends response body.
 In the above example, we send string "hello, world".
 
 The life time of req and res object ends after the callback set by
@@ -277,7 +277,7 @@ response header fields and response body to the console screen:
 ``boost::asio::io_service`` object and remote server address.  When
 connection is made, the callback function passed to
 ``nghttp2::asio_http2::client::on_connect`` is invoked with connected
-address as its paramter.  After this callback call, use
+address as its parameter.  After this callback call, use
 ``nghttp2::asio_http2::session::submit`` to send request to the
 server.  You can submit multiple requests at once without waiting for
 the completion of previous request.

doc/sources/nghttpx-howto.rst

@@ -21,7 +21,7 @@ SSL/TLS, the frontend also supports SPDY protocol.
 By default, this mode's frontend connection is encrypted using
 SSL/TLS.  So server's private key and certificate must be supplied to
 the command line (or through configuration file).  In this case, the
-fontend protocol selection will is done via ALPN or NPN.
+frontend protocol selection will is done via ALPN or NPN.
 
 With ``--frontend-no-tls`` option, user can turn off SSL/TLS in
 frontend connection.  In this case, SPDY protocol is not available
@@ -243,7 +243,7 @@ Read/write rate limit
 ---------------------
 
 nghttpx supports transfer rate limiting on frontend connections.  You
-can do rate limit per frontend connection for reading and writeing
+can do rate limit per frontend connection for reading and writing
 individually.
 
 To perform rate limit for reading, use ``--read-rate`` and

doc/sources/python-apiref.rst

@@ -267,7 +267,7 @@ HTTP/2 servers
       (byte string could be ``None``), :py:data:`DATA_EOF` must be
       returned as flag.  If there is no data available right now, but
       additional data are anticipated, return tuple (``None``,
-      :py:data:`DATA_DEFERRD`).  When data arrived, call
+      :py:data:`DATA_DEFERRED`).  When data arrived, call
       :py:meth:`resume()` and restart response body transmission.
 
       Only the body generator can pause response body generation;

doc/sources/tutorial-client.rst

@@ -65,11 +65,11 @@ its stream specific data in ``http2_stream_data`` structure and the
 defined as follows::
 
     typedef struct {
-      /* The NULL-terminated URI string to retreive. */
+      /* The NULL-terminated URI string to retrieve. */
       const char *uri;
       /* Parsed result of the |uri| */
       struct http_parser_url *u;
-      /* The authroity portion of the |uri|, not NULL-terminated */
+      /* The authority portion of the |uri|, not NULL-terminated */
       char *authority;
       /* The path portion of the |uri|, including query, not
          NULL-terminated */
@@ -204,7 +204,7 @@ transmission of client connection header is done in
     }
 
 Here we specify SETTINGS_MAX_CONCURRENT_STREAMS to 100, which is
-really not needed for this tiny example progoram, but we are
+really not needed for this tiny example program, but we are
 demonstrating the use of SETTINGS frame. To queue the SETTINGS frame
 for the transmission, we use `nghttp2_submit_settings()`. Note that
 `nghttp2_submit_settings()` function only queues the frame and not
@@ -388,7 +388,7 @@ After all name/value pairs are emitted for a frame,
     }
 
 In this tutorial, we are just interested in the HTTP response
-HEADERS. We check te frame type and its category (it should be
+HEADERS. We check the frame type and its category (it should be
 :macro:`NGHTTP2_HCAT_RESPONSE` for HTTP response HEADERS). Also check
 its stream ID.
 
@@ -407,7 +407,7 @@ of data is received from the remote peer::
     }
 
 In our case, a chunk of data is response body. After checking stream
-ID, we just write the recieved data to the stdout. Note that the
+ID, we just write the received data to the stdout. Note that the
 output in the terminal may be corrupted if the response body contains
 some binary data.
 

doc/sources/tutorial-hpack.rst

@@ -51,7 +51,7 @@ bound of encoded result, use `nghttp2_hd_deflate_bound()` function::
     size_t nghttp2_hd_deflate_bound(nghttp2_hd_deflater *deflater,
                                     const nghttp2_nv *nva, size_t nvlen);
 
-Pass this function with the same paramters *deflater*, *nva* and
+Pass this function with the same parameters *deflater*, *nva* and
 *nvlen* which will be passed to `nghttp2_hd_deflate_hd()`.
 
 The subsequent call of `nghttp2_hd_deflate_hd()` will use current