Previously, we did not handle PRIORITY frame which depends on itself
and for idle stream. As a result, nghttp2_session_mem_recv (or
nghttp2_session_recv) returne NGHTTP2_ERR_NOMEM. The error code was
still misleading. It was not out of memory, and we failed to insert
hash map because of duplicated key, which was treated as out of
memory. This commit fixes this issue, by explicitly checking
dependency for incoming PRIORITY for all cases.
When we know that stream is closed at time we read DATA frame header,
we use NGHTTP2_IB_IGN_DATA, and consume data for connection if
nghttp2_option_set_no_auto_window_update() is used. However, if
stream is closed while we are in NGHTTP2_IB_READ_DATA, those bytes are
not consumed for connection, nor notified to application via callback,
so it eventually fills up connection window and connection will
freeze. This commit fixes this issue by consuming these data for
connection when stream is closed or does not exist.
The private global variable nghttp2_enable_strict_preface is also
marked as NGHTTP2_EXTERN, but it is test purpose only (test with
.dll), and not part of public API. It could be removed in the future
release.
From autoconf manual, section 5.6.1 Portability of Headers, says:
"""
The C99 standard says that inttypes.h includes stdint.h, so there's no
need to include stdint.h separately in a standard environment. Some
implementations have inttypes.h but not stdint.h (e.g., Solaris 7),
but we don't know of any implementation that has stdint.h but not
inttypes.h.
"""
The assert only evaluates to code if NDEBUG is undefined. Protect rv and its use accordingly
Issue reported by Joerg Mayer
https://code.wireshark.org/review/8260
After reviewing codebase, only queue for DATA frames requires
priorities. Other frames can be replaced multiple linear queues.
Replacing priority queue with linear queue allows us to simplify
codebase a bit; for example, now nghttp2_session.next_seq is gone.
Since application most likely allocates the stream object in
nghttp2_on_begin_headers_callback, it is desirable to handle its
failure as stream error. But previously it only signals success or
fatal error. Submitting RST_STREAM does not prevent
nghttp2_on_header_callback from being invoked. This commit improves
this situation by allowing NGHTTP2_ERR_TEMPORAL_CALLBACK_FAILURE from
nghttp2_on_begin_headers_callback. If that value is returned, library
submits RST_STREAM with error code INTERNAL_ERROR, and
nghttp2_on_header_callback and nghttp2_on_frame_recv_callback for that
frame are not invoked. Note that for PUSH_PROMISE frame, the stream
to be reset is promised stream.
We rewrite static header table handling in nghttp2_hd.c. We expand
nghttp2_token to include all static header table entries, and fully
use them in header compression and decompression. The lookup function
is now located in nghttp2_hd.c. We add new nghttp2_hd_inflate_hd2()
function to export token value for header name, then we pass it to
nghttp2_http_on_header function, so that we don't have to look up
token there. We carefully set enum value of token to static table
index, so looking up static table is now O(1), assuming we have token.
nghttp2 library now use Literal Header Field never Indexed for
"authorization" header field and small "cookie" header field,
regardless of nghttp2_nv.flags.
The existing nghttp2_session_consume() affects both connection and
stream level flow control windows. The new functions only affects
either connection or stream. There is some interesting use cases.
For example, we may want to pause a stream by not sending
WINDOW_UPDATE, meanwhile we want to continue to process other streams.
In this case, we use nghttp2_session_consume_connection() to tell
library that only connection level window is recovered. The relevant
discussion: https://code.google.com/p/chromium/issues/detail?id=473259
Previously nghttp2_session_send() and nghttp2_session_mem_send() did
not send 24 bytes client magic byte string (MAGIC). We made
nghttp2_session_recv() and nghttp2_session_mem_recv() process MAGIC by
default, so it is natural to make library send MAGIC as well. This
commit makes nghttp2_session_send() and nghttp2_session_mem_send()
send MAGIC. This commit also replace "connection preface" with
"client magic", since we call MAGIC as "connection preface" but it is
just a part of connection preface. NGHTTP2_CLIENT_CONNECTION_PREFACE
macro was replaced with NGHTTP2_CLIENT_MAGIC. The already deprecated
NGHTTP2_CLIENT_CONNECTION_HEADER macro was removed permanently.
nghttp2_option_set_no_recv_client_preface() was renamed as
nghttp2_option_set_no_recv_client_magic(). NGHTTP2_ERR_BAD_PREFACE
was renamed as NGHTTP2_ERR_BAD_CLIENT_MAGIC.
Since HTTP/2 spec requires for client to send connection preface, it
is reasonable to make this option enabled by default. It is still a
use case to disable this, so replace this option with
nghttp2_option_set_no_recv_client_preface().
HTTP/2 and HPACK are going to be published as RFC, but ALTSVC is still
in draft state. To make our API stable, it would be better to remove
ALTSVC API for 1.0.0 release.
To avoid buffer copy in nghttp2_data_source_read_callback, this commit
introduces NGHTTP2_DATA_FLAG_NO_COPY and nghttp2_send_data_callback.
By using NGHTTP2_DATA_FLAG_NO_COPY in
nghttp2_data_source_read_callback, application can avoid to copy
application data to given buffer. Instead, application has to
implement nghttp2_send_data_callback to send complete DATA frame by
itself. We see noticeable performance increase in nghttpd and
tiny-nghttpd using this new feature. On the other hand, nghttpx does
not show such difference, probably because buffer copy is not
bottleneck. Using nghttp2_send_data_callback adds complexity, so it
is recommended to measure the performance to see whether this extra
complexity worth it.
Previously API reference is gigantic one rst file and it is a bit hard
to use, especially when browsing similar functions. This commit
splits API reference into smaller fine grained files. The macros,
enums, types are now in its own file. Each API function has its own
file now. API reference doc is now index to above documentation
files. The apiref-header.rst is renamed as programmers-guide.rst and
becomes standalone document.
For "http" or "https" URIs, :path header field must start with "/".
The only exception is OPTIONS method, which can contain "*" to
represent system-wide OPTIONS request.
nghttp2_submit_request and nghttp2_submit_response will set
NGHTTP2_FLAG_END_STREAM after all given data is sent (data could be
0). This means we have no way to send trailers. In this commit, we
added NGHTTP2_DATA_FLAG_NO_END_STREAM flag. The application can set
this flag in *data_flags inside nghttp2_data_source_read_callback. If
NGHTTP2_DATA_FLAG_EOF is set, library automatically set
NGHTTP2_FLAG_END_STREAM. But if both NGHTTP2_DATA_FLAG_EOF and
NGHTTP2_DATA_FLAG_NO_END_STREAM are set, NGHTTP2_FLAG_END_STREAM will
not set by library. Then application can use new
nghttp2_submit_trailer() to send trailers. nghttp2_submit_trailer()
will set NGHTTP2_FLAG_END_STREAM and it is actually thing wrapper of
nghttp2_submit_headers().
After we sent SETTINGS including ENABLE_PUSH = 0, peer may already
issue PUSH_PROMISE before receiving our SETTINGS and react it to
SETTINGS ACK. Previously we accept this PUSH_PROMISE. In this
commit, we check the pending ENABLE_PUSH value and if it means
disabling push, we refuse PUSH_PROMISE with RST_STREAM of error
REFUSED_STREAM.
This commit only affects the library behaviour unless
nghttp2_option_set_no_http_messaging() is used.
We like strict validation against header field name and value against
RFC 7230, but we have already so much web sites and libraries in
public internet which do not obey these rules. Simply just
terminating stream because of this may break web sites and it is too
disruptive. So we decided that we should be conservative here so
those header fields containing illegal characters are just ignored.
But we are conservative only for regular headers. We are strict for
pseudo headers since it is new to HTTP/2 and new implementations
should know the rules better.
This API function with nonzero |val| parameter disables HTTP Messaging
validation in nghttp2 library, so that application can use nghttp2
library for non-HTTP use.
Previously we did not check HTTP semantics and it is left out for
application. Although checking is relatively easy, but they are
scattered and error prone. We have implemented these checks in our
applications and also feel they are tedious. To make application
development a bit easier, this commit adds basic HTTP semantics
validation to library code. We do following checks:
server:
* HEADERS is either request header or trailer header. Other type of
header is disallowed.
client:
* HEADERS is either zero or more non-final response header or final
response header or trailer header. Other type of header is
disallowed.
For both:
* Check mandatory pseudo header fields.
* Make sure that content-length matches the amount of DATA we
received.
If validation fails, RST_STREAM of type PROTOCOL_ERROR is issued.
Tatsuhiro Tsujikawa
Etienne Cimon
Alexis La Goutte
Remo E
Daniel Stenberg