386 lines
14 KiB
ReStructuredText
386 lines
14 KiB
ReStructuredText
.. program:: nghttpx
|
|
|
|
nghttpx - HTTP/2 proxy - HOW-TO
|
|
===============================
|
|
|
|
:doc:`nghttpx.1` is a proxy translating protocols between HTTP/2 and
|
|
other protocols (e.g., HTTP/1, SPDY). It operates in several modes
|
|
and each mode may require additional programs to work with. This
|
|
article describes each operation mode and explains the intended
|
|
use-cases. It also covers some useful options later.
|
|
|
|
Default mode
|
|
------------
|
|
|
|
If nghttpx is invoked without :option:`--http2-proxy`, it operates in
|
|
default mode. In this mode, it works as reverse proxy (gateway) for
|
|
both HTTP/2 and HTTP/1 clients to backend servers. This is also known
|
|
as "HTTP/2 router". If nghttpx is linked with spdylay library and
|
|
frontend connection is SSL/TLS, the frontend also supports SPDY
|
|
protocol.
|
|
|
|
By default, frontend connection is encrypted using SSL/TLS. So
|
|
server's private key and certificate must be supplied to the command
|
|
line (or through configuration file). In this case, the frontend
|
|
protocol selection will be done via ALPN or NPN.
|
|
|
|
To turn off encryption on frontend connection, use ``no-tls`` keyword
|
|
in :option:`--frontend` option. In this case, SPDY protocol is not
|
|
available even if spdylay library is liked to nghttpx. HTTP/2 and
|
|
HTTP/1 are available on the frontend, and an HTTP/1 connection can be
|
|
upgraded to HTTP/2 using HTTP Upgrade. Starting HTTP/2 connection by
|
|
sending HTTP/2 connection preface is also supported.
|
|
|
|
nghttpx can listen on multiple frontend addresses. This is achieved
|
|
by using multiple :option:`--frontend` options. For each frontend
|
|
address, TLS can be enabled or disabled.
|
|
|
|
By default, backend connections are not encrypted. To enable TLS
|
|
encryption on backend connections, use ``tls`` keyword in
|
|
:option:`--backend` option. Using patterns and ``proto`` keyword in
|
|
:option:`--backend` option, backend application protocol can be
|
|
specified per host/request path pattern. It means that you can use
|
|
both HTTP/2 and HTTP/1 in backend connections at the same time. Note
|
|
that default backend protocol is HTTP/1.1. To use HTTP/2 in backend,
|
|
you have to specify ``h2`` in ``proto`` keyword in :option:`--backend`
|
|
explicitly.
|
|
|
|
The backend is supposed to be Web server. For example, to make
|
|
nghttpx listen to encrypted HTTP/2 requests at port 8443, and a
|
|
backend Web server is configured to listen to HTTP request at port
|
|
8080 in the same host, run nghttpx command-line like this::
|
|
|
|
$ nghttpx -f0.0.0.0,8443 -b127.0.0.1,8080 /path/to/server.key /path/to/server.crt
|
|
|
|
Then HTTP/2 enabled client can access to the nghttpx in HTTP/2. For
|
|
example, you can send GET request to the server using nghttp::
|
|
|
|
$ nghttp -nv https://localhost:8443/
|
|
|
|
HTTP/2 proxy mode
|
|
-----------------
|
|
|
|
If nghttpx is invoked with :option:`--http2-proxy` (or its shorthand
|
|
:option:`-s`) option, it operates in HTTP/2 proxy mode. The supported
|
|
protocols in frontend and backend connections are the same in `default
|
|
mode`_. The difference is that this mode acts like forward proxy and
|
|
assumes the backend is HTTP proxy server (e.g., Squid, Apache Traffic
|
|
Server). HTTP/1 request must include absolute URI in request line.
|
|
|
|
By default, frontend connection is encrypted. So this mode is also
|
|
called secure proxy. If nghttpx is linked with spdylay, it supports
|
|
SPDY protocols and it works as so called SPDY proxy.
|
|
|
|
To turn off encryption on frontend connection, use ``no-tls`` keyword
|
|
in :option:`--frontend` option.
|
|
|
|
The backend must be HTTP proxy server. nghttpx supports multiple
|
|
backend server addresses. It translates incoming requests to HTTP
|
|
request to backend server. The backend server performs real proxy
|
|
work for each request, for example, dispatching requests to the origin
|
|
server and caching contents.
|
|
|
|
The backend connection is not encrypted by default. To enable
|
|
encryption, use ``tls`` keyword in :option:`--backend` option. The
|
|
default backend protocol is HTTP/1.1. To use HTTP/2 in backend
|
|
connection, use :option:`--backend` option, and specify ``h2`` in
|
|
``proto`` keyword explicitly.
|
|
|
|
For example, to make nghttpx listen to encrypted HTTP/2 requests at
|
|
port 8443, and a backend HTTP proxy server is configured to listen to
|
|
HTTP/1 request at port 8080 in the same host, run nghttpx command-line
|
|
like this::
|
|
|
|
$ nghttpx -s -f'*,8443' -b127.0.0.1,8080 /path/to/server.key /path/to/server.crt
|
|
|
|
At the time of this writing, Firefox 41 and Chromium v46 can use
|
|
nghttpx as HTTP/2 proxy.
|
|
|
|
To make Firefox or Chromium use nghttpx as HTTP/2 or SPDY proxy, user
|
|
has to create proxy.pac script file like this:
|
|
|
|
.. code-block:: javascript
|
|
|
|
function FindProxyForURL(url, host) {
|
|
return "HTTPS SERVERADDR:PORT";
|
|
}
|
|
|
|
``SERVERADDR`` and ``PORT`` is the hostname/address and port of the
|
|
machine nghttpx is running. Please note that both Firefox and
|
|
Chromium require valid certificate for secure proxy.
|
|
|
|
For Firefox, open Preference window and select Advanced then click
|
|
Network tab. Clicking Connection Settings button will show the
|
|
dialog. Select "Automatic proxy configuration URL" and enter the path
|
|
to proxy.pac file, something like this:
|
|
|
|
.. code-block:: text
|
|
|
|
file:///path/to/proxy.pac
|
|
|
|
For Chromium, use following command-line::
|
|
|
|
$ google-chrome --proxy-pac-url=file:///path/to/proxy.pac --use-npn
|
|
|
|
As HTTP/1 proxy server, Squid may work as out-of-box. Traffic server
|
|
requires to be configured as forward proxy. Here is the minimum
|
|
configuration items to edit::
|
|
|
|
CONFIG proxy.config.reverse_proxy.enabled INT 0
|
|
CONFIG proxy.config.url_remap.remap_required INT 0
|
|
|
|
Consult Traffic server `documentation
|
|
<http://trafficserver.readthedocs.org/en/latest/admin-guide/configuration/transparent-forward-proxying.en.html>`_
|
|
to know how to configure traffic server as forward proxy and its
|
|
security implications.
|
|
|
|
Disable frontend SSL/TLS
|
|
------------------------
|
|
|
|
The frontend connections are encrypted with SSL/TLS by default. To
|
|
turn off SSL/TLS, use ``no-tls`` keyword in :option:`--frontend`
|
|
option. If this option is used, the private key and certificate are
|
|
not required to run nghttpx.
|
|
|
|
Enable backend SSL/TLS
|
|
----------------------
|
|
|
|
The backend connections are not encrypted by default. To enable
|
|
SSL/TLS encryption, use ``tls`` keyword in :option:`--backend` option.
|
|
|
|
Enable SSL/TLS on memcached connection
|
|
--------------------------------------
|
|
|
|
By default, memcached connection is not encrypted. To enable
|
|
encryption, use :option:`--tls-ticket-key-memcached-tls` for TLS
|
|
ticket key, and use :option:`--tls-session-cache-memcached-tls` for
|
|
TLS session cache.
|
|
|
|
Specifying additional server certificates
|
|
-----------------------------------------
|
|
|
|
nghttpx accepts additional server private key and certificate pairs
|
|
using :option:`--subcert` option. It can be used multiple times.
|
|
|
|
Specifying additional CA certificate
|
|
------------------------------------
|
|
|
|
By default, nghttpx tries to read CA certificate from system. But
|
|
depending on the system you use, this may fail or is not supported.
|
|
To specify CA certificate manually, use :option:`--cacert` option.
|
|
The specified file must be PEM format and can contain multiple
|
|
certificates.
|
|
|
|
By default, nghttpx validates server's certificate. If you want to
|
|
turn off this validation, knowing this is really insecure and what you
|
|
are doing, you can use :option:`--insecure` option to disable
|
|
certificate validation.
|
|
|
|
Read/write rate limit
|
|
---------------------
|
|
|
|
nghttpx supports transfer rate limiting on frontend connections. You
|
|
can do rate limit per frontend connection for reading and writing
|
|
individually.
|
|
|
|
To perform rate limit for reading, use :option:`--read-rate` and
|
|
:option:`--read-burst` options. For writing, use
|
|
:option:`--write-rate` and :option:`--write-burst`.
|
|
|
|
Please note that rate limit is performed on top of TCP and nothing to
|
|
do with HTTP/2 flow control.
|
|
|
|
Rewriting location header field
|
|
-------------------------------
|
|
|
|
nghttpx automatically rewrites location response header field if the
|
|
following all conditions satisfy:
|
|
|
|
* URI in location header field is not absolute URI or is not https URI.
|
|
* URI in location header field includes non empty host component.
|
|
* host (without port) in URI in location header field must match the
|
|
host appearing in :authority or host header field.
|
|
|
|
When rewrite happens, URI scheme and port are replaced with the ones
|
|
used in frontend, and host is replaced with which appears in
|
|
:authority or host request header field. :authority header field has
|
|
precedence. If the above conditions are not met with the host value
|
|
in :authority header field, rewrite is retried with the value in host
|
|
header field.
|
|
|
|
Hot swapping
|
|
------------
|
|
|
|
nghttpx supports hot swapping using signals. The hot swapping in
|
|
nghttpx is multi step process. First send USR2 signal to nghttpx
|
|
process. It will do fork and execute new executable, using same
|
|
command-line arguments and environment variables. At this point, both
|
|
current and new processes can accept requests. To gracefully shutdown
|
|
current process, send QUIT signal to current nghttpx process. When
|
|
all existing frontend connections are done, the current process will
|
|
exit. At this point, only new nghttpx process exists and serves
|
|
incoming requests.
|
|
|
|
Re-opening log files
|
|
--------------------
|
|
|
|
When rotating log files, it is desirable to re-open log files after
|
|
log rotation daemon renamed existing log files. To tell nghttpx to
|
|
re-open log files, send USR1 signal to nghttpx process. It will
|
|
re-open files specified by :option:`--accesslog-file` and
|
|
:option:`--errorlog-file` options.
|
|
|
|
Multiple frontend addresses
|
|
---------------------------
|
|
|
|
nghttpx can listen on multiple frontend addresses. To specify them,
|
|
just use :option:`--frontend` (or its shorthand :option:`-f`) option
|
|
repeatedly. TLS can be enabled or disabled per frontend address
|
|
basis. For example, to listen on port 443 with TLS enabled, and on
|
|
port 80 without TLS:
|
|
|
|
.. code-block:: text
|
|
|
|
frontend=*,443
|
|
frontend=*,80;no-tls
|
|
|
|
|
|
Multiple backend addresses
|
|
--------------------------
|
|
|
|
nghttpx supports multiple backend addresses. To specify them, just
|
|
use :option:`--backend` (or its shorthand :option:`-b`) option
|
|
repeatedly. For example, to use ``192.168.0.10:8080`` and
|
|
``192.168.0.11:8080``, use command-line like this:
|
|
``-b192.168.0.10,8080 -b192.168.0.11,8080``. In configuration file,
|
|
this looks like:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=192.168.0.10,8080
|
|
backend=192.168.0.11,8008
|
|
|
|
nghttpx can route request to different backend according to request
|
|
host and path. For example, to route request destined to host
|
|
``doc.example.com`` to backend server ``docserv:3000``, you can write
|
|
like so:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=docserv,3000;doc.example.com/
|
|
|
|
When you write this option in command-line, you should enclose
|
|
argument with single or double quotes, since the character ``;`` has a
|
|
special meaning in shell.
|
|
|
|
To route, request to request path whose prefix is ``/foo`` to backend
|
|
server ``[::1]:8080``, you can write like so:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=::1,8080;/foo
|
|
|
|
Of course, you can specify both host and request path at the same
|
|
time:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=192.168.0.10,8080;example.com/foo
|
|
|
|
We can use ``*`` in the left most position of host to achieve wildcard
|
|
suffix match. If ``*`` is the left most character, then the remaining
|
|
string should match the request host suffix. ``*`` must match at
|
|
least one character. For example, ``*.example.com`` matches
|
|
``www.example.com`` and ``dev.example.com``, and does not match
|
|
``example.com`` and ``nghttp2.org``. The exact match (without ``*``)
|
|
always takes precedence over wildcard match.
|
|
|
|
One important thing you have to remember is that we have to specify
|
|
default routing pattern for so called "catch all" pattern. To write
|
|
"catch all" pattern, just specify backend server address, without
|
|
pattern.
|
|
|
|
Usually, host is the value of ``Host`` header field. In HTTP/2, the
|
|
value of ``:authority`` pseudo header field is used.
|
|
|
|
When you write multiple backend addresses sharing the same routing
|
|
pattern, they are used as load balancing. For example, to use 2
|
|
servers ``serv1:3000`` and ``serv2:3000`` for request host
|
|
``example.com`` and path ``/myservice``, you can write like so:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=serv1,3000;example.com/myservice
|
|
backend=serv2,3000;example.com/myservice
|
|
|
|
You can also specify backend application protocol in
|
|
:option:`--backend` option using ``proto`` keyword after pattern.
|
|
Utilizing this allows ngttpx to route certain request to HTTP/2, other
|
|
requests to HTTP/1. For example, to route requests to ``/ws/`` in
|
|
backend HTTP/1.1 connection, and use backend HTTP/2 for other
|
|
requests, do this:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=serv1,3000;/;proto=h2
|
|
backend=serv1,3000;/ws/;proto=http/1.1
|
|
|
|
Note that the backends share the same pattern must have the same
|
|
backend protocol. The default backend protocol is HTTP/1.1.
|
|
|
|
TLS can be enabed per pattern basis:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=serv1,8443;/;proto=h2;tls
|
|
backend=serv2,8080;/ws/;proto=http/1.1
|
|
|
|
In the above case, connection to serv1 will be encrypted by TLS. On
|
|
the other hand, connection to serv2 will not be encrypted by TLS.
|
|
|
|
Migration from nghttpx v1.8.0 or earlier
|
|
----------------------------------------
|
|
|
|
As of nghttpx 1.9.0, ``--frontend-no-tls`` and ``--backend-no-tls``
|
|
have been removed.
|
|
|
|
To disable encryption on frontend connection, use ``no-tls`` keyword
|
|
in :option:`--frontend` potion:
|
|
|
|
.. code-block:: text
|
|
|
|
frontend=*,3000;no-tls
|
|
|
|
The TLS encryption is now disabled on backend connection in all modes
|
|
by default. To enable encryption on backend connection, use ``tls``
|
|
keyword in :option:`--backend` option:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=127.0.0.1,8080;tls
|
|
|
|
As of nghttpx 1.9.0, ``--http2-bridge``, ``--client`` and
|
|
``--client-proxy`` options have been removed. These functionality can
|
|
be used using combinations of options.
|
|
|
|
Use following option instead of ``--http2-bridge``:
|
|
|
|
.. code-block:: text
|
|
|
|
backend=<ADDR>,<PORT>;;proto=h2;tls
|
|
|
|
Use following options instead of ``--client``:
|
|
|
|
.. code-block:: text
|
|
|
|
frontend=<ADDR>,<PORT>;no-tls
|
|
backend=<ADDR>,<PORT>;;proto=h2;tls
|
|
|
|
Use following options instead of ``--client-proxy``:
|
|
|
|
.. code-block:: text
|
|
|
|
http2-proxy=yes
|
|
frontend=<ADDR>,<PORT>;no-tls
|
|
backend=<ADDR>,<PORT>;;proto=h2;tls
|