From fb0e397330e6291823bee6a8defcede0a4e0a3bc Mon Sep 17 00:00:00 2001 From: mayeut Date: Sat, 4 Jul 2015 18:45:06 +0200 Subject: [PATCH] Update zlib to version 1.2.8 --- thirdparty/include/zconf.h | 201 ++++++--- thirdparty/include/zconf.h.cmake.msvc | 430 -------------------- thirdparty/include/zlib.h | 343 +++++++++++----- thirdparty/libz/adler32.c | 68 ++-- thirdparty/libz/compress.c | 2 +- thirdparty/libz/crc32.c | 83 ++-- thirdparty/libz/crc32.h | 2 +- thirdparty/libz/deflate.c | 261 +++++++++--- thirdparty/libz/deflate.h | 12 +- thirdparty/libz/example.c | 565 -------------------------- thirdparty/libz/gzguts.h | 103 ++++- thirdparty/libz/gzlib.c | 197 ++++++--- thirdparty/libz/gzread.c | 431 +++++++++----------- thirdparty/libz/gzwrite.c | 196 +++++---- thirdparty/libz/infback.c | 16 +- thirdparty/libz/inffast.c | 6 +- thirdparty/libz/inffixed.h | 6 +- thirdparty/libz/inflate.c | 136 ++++--- thirdparty/libz/inftrees.c | 54 +-- thirdparty/libz/minigzip.c | 440 -------------------- thirdparty/libz/trees.c | 54 +-- thirdparty/libz/uncompr.c | 2 +- thirdparty/libz/zlib.h | 343 +++++++++++----- thirdparty/libz/zutil.c | 26 +- thirdparty/libz/zutil.h | 103 ++--- 25 files changed, 1656 insertions(+), 2424 deletions(-) delete mode 100644 thirdparty/include/zconf.h.cmake.msvc delete mode 100644 thirdparty/libz/example.c delete mode 100644 thirdparty/libz/minigzip.c diff --git a/thirdparty/include/zconf.h b/thirdparty/include/zconf.h index 02ce56c4..9987a775 100644 --- a/thirdparty/include/zconf.h +++ b/thirdparty/include/zconf.h @@ -1,5 +1,5 @@ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2010 Jean-loup Gailly. + * Copyright (C) 1995-2013 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -15,11 +15,13 @@ * this permanently in zconf.h using "./configure --zprefix". */ #ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET /* all linked symbols */ # define _dist_code z__dist_code # define _length_code z__length_code # define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits # define _tr_flush_block z__tr_flush_block # define _tr_init z__tr_init # define _tr_stored_block z__tr_stored_block @@ -27,9 +29,11 @@ # define adler32 z_adler32 # define adler32_combine z_adler32_combine # define adler32_combine64 z_adler32_combine64 -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif # define crc32 z_crc32 # define crc32_combine z_crc32_combine # define crc32_combine64 z_crc32_combine64 @@ -40,44 +44,53 @@ # define deflateInit2_ z_deflateInit2_ # define deflateInit_ z_deflateInit_ # define deflateParams z_deflateParams +# define deflatePending z_deflatePending # define deflatePrime z_deflatePrime # define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep # define deflateSetDictionary z_deflateSetDictionary # define deflateSetHeader z_deflateSetHeader # define deflateTune z_deflateTune # define deflate_copyright z_deflate_copyright # define get_crc_table z_get_crc_table -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif # define inflate z_inflate # define inflateBack z_inflateBack # define inflateBackEnd z_inflateBackEnd @@ -92,16 +105,22 @@ # define inflateReset z_inflateReset # define inflateReset2 z_inflateReset2 # define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary # define inflateSync z_inflateSync # define inflateSyncPoint z_inflateSyncPoint # define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep # define inflate_copyright z_inflate_copyright # define inflate_fast z_inflate_fast # define inflate_table z_inflate_table -# define uncompress z_uncompress +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif # define zError z_zError -# define zcalloc z_zcalloc -# define zcfree z_zcfree +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif # define zlibCompileFlags z_zlibCompileFlags # define zlibVersion z_zlibVersion @@ -111,7 +130,9 @@ # define alloc_func z_alloc_func # define charf z_charf # define free_func z_free_func -# define gzFile z_gzFile +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif # define gz_header z_gz_header # define gz_headerp z_gz_headerp # define in_func z_in_func @@ -197,6 +218,12 @@ # endif #endif +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + /* Some Mac compilers merge all .h files incorrectly: */ #if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) # define NO_DUMMY_DECL @@ -243,6 +270,14 @@ # endif #endif +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + /* The following definitions for FAR are needed only for MSDOS mixed * model programming (small or medium model with some far allocations). * This was tested only with MSC; for other MSDOS compilers you may have @@ -356,12 +391,47 @@ typedef uLong FAR uLongf; typedef Byte *voidp; #endif +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + #ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ # define Z_HAVE_UNISTD_H #endif +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + #ifdef STDC -# include /* for off_t */ +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif #endif /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and @@ -370,21 +440,38 @@ typedef uLong FAR uLongf; * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as * equivalently requesting no 64-bit operations */ -#if -_LARGEFILE64_SOURCE - -1 == 1 +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 # undef _LARGEFILE64_SOURCE #endif -#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_* and off_t */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif # endif #endif -#ifndef SEEK_SET +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) # define SEEK_SET 0 /* Seek from beginning of file. */ # define SEEK_CUR 1 /* Seek from current position. */ # define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ @@ -394,18 +481,14 @@ typedef uLong FAR uLongf; # define z_off_t long #endif -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +#if !defined(_WIN32) && defined(Z_LARGE64) # define z_off64_t off64_t #else -# define z_off64_t z_off_t -#endif - -#if defined(__OS400__) -# define NO_vsnprintf -#endif - -#if defined(__MVS__) -# define NO_vsnprintf +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif #endif /* MVS linker does not support external names larger than 8 bytes */ diff --git a/thirdparty/include/zconf.h.cmake.msvc b/thirdparty/include/zconf.h.cmake.msvc deleted file mode 100644 index 57465e07..00000000 --- a/thirdparty/include/zconf.h.cmake.msvc +++ /dev/null @@ -1,430 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2010 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H -/* #undef Z_PREFIX */ -/* #undef Z_HAVE_UNISTD_H */ - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ - -/* all linked symbols */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzgetc z_gzgetc -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzwrite z_gzwrite -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetHeader z_inflateGetHeader -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# define uncompress z_uncompress -# define zError z_zError -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# define gzFile z_gzFile -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -/* Some Mac compilers merge all .h files incorrectly: */ -#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) -# define NO_DUMMY_DECL -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef STDC -# include /* for off_t */ -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_* and off_t */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -#endif - -#ifndef SEEK_SET -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 -# define z_off64_t off64_t -#else -# define z_off64_t z_off_t -#endif - -#if defined(__OS400__) -# define NO_vsnprintf -#endif - -#if defined(__MVS__) -# define NO_vsnprintf -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/thirdparty/include/zlib.h b/thirdparty/include/zlib.h index bfbba83e..3e0c7672 100644 --- a/thirdparty/include/zlib.h +++ b/thirdparty/include/zlib.h @@ -1,7 +1,7 @@ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.5, April 19th, 2010 + version 1.2.8, April 28th, 2013 - Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -24,8 +24,8 @@ The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). */ #ifndef ZLIB_H @@ -37,11 +37,11 @@ extern "C" { #endif -#define ZLIB_VERSION "1.2.5" -#define ZLIB_VERNUM 0x1250 +#define ZLIB_VERSION "1.2.8" +#define ZLIB_VERNUM 0x1280 #define ZLIB_VER_MAJOR 1 #define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 5 +#define ZLIB_VER_REVISION 8 #define ZLIB_VER_SUBREVISION 0 /* @@ -83,15 +83,15 @@ typedef void (*free_func) OF((voidpf opaque, voidpf address)); struct internal_state; typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ + z_const Bytef *next_in; /* next input byte */ uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ + uLong total_in; /* total number of input bytes read so far */ Bytef *next_out; /* next output byte should be put there */ uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ + uLong total_out; /* total number of bytes output so far */ - char *msg; /* last error message, NULL if no error */ + z_const char *msg; /* last error message, NULL if no error */ struct internal_state FAR *state; /* not visible by applications */ alloc_func zalloc; /* used to allocate the internal state */ @@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); Z_FINISH can be used immediately after deflateInit if all the compression is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). If deflate does not return - Z_STREAM_END, then it must be called again as described above. + value returned by deflateBound (see below). Then deflate is guaranteed to + return Z_STREAM_END. If not enough output space is provided, deflate will + not return Z_STREAM_END, and it must be called again as described above. deflate() sets strm->adler to the adler32 checksum of all input read so far (that is, total_in bytes). @@ -451,23 +452,29 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); error. However if all decompression is to be performed in a single step (a single call of inflate), the parameter flush should be set to Z_FINISH. In this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all the uncompressed data. (The size - of the uncompressed data may have been saved by the compressor for this - purpose.) The next operation on this stream must be inflateEnd to deallocate - the decompression state. The use of Z_FINISH is never required, but can be - used to inform inflate that a faster approach may be used for the single - inflate() call. + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. In this implementation, inflate() always flushes as much output as possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK or Z_TREES is used. + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, + strm->adler to the Adler-32 checksum of all output produced so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described below. At the end of the stream, inflate() checks that its computed adler32 checksum is equal to that saved by the compressor and returns Z_STREAM_END @@ -478,7 +485,9 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); initializing with inflateInit2(). Any information contained in the gzip header is not retained, so applications that need that information should instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. + perform their own processing of the gzip header and trailer. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + producted so far. The CRC-32 is checked against the gzip trailer. inflate() returns Z_OK if some progress has been made (more input processed or more output produced), Z_STREAM_END if the end of the compressed data has @@ -580,10 +589,15 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, uInt dictLength)); /* Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any call - of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). The dictionary should consist of strings (byte sequences) that are likely to be encountered later in the data to be compressed, with the most commonly @@ -610,8 +624,8 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). */ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, @@ -688,9 +702,29 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, deflation of sourceLen bytes. It must be called after deflateInit() or deflateInit2(), and after deflateSetHeader(), if used. This would be used to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. */ +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, int bits, int value)); @@ -703,8 +737,9 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, than or equal to 16, and that many of the least significant bits of value will be inserted in the output. - deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. */ ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, @@ -790,10 +825,11 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, if that call returned Z_NEED_DICT. The dictionary chosen by the compressor can be determined from the adler32 value returned by that call of inflate. The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is @@ -803,19 +839,38 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, inflate(). */ +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); /* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all available input is skipped. No output is provided. - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been - found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the - success case, the application may save the current current value of total_in - which indicates where valid compressed data was found. In the error case, - the application may repeatedly call inflateSync, providing more input each - time, until success or end of the input data. + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. */ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, @@ -962,12 +1017,13 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, See inflateBack() for the usage of these routines. inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the paramaters are invalid, Z_MEM_ERROR if the internal state could not be + the parameters are invalid, Z_MEM_ERROR if the internal state could not be allocated, or Z_VERSION_ERROR if the version of the library does not match the version of the header file. */ -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, @@ -975,11 +1031,12 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, out_func out, void FAR *out_desc)); /* inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. inflateBackInit() must be called first to allocate the internal state and to initialize the state with the user-provided window buffer. @@ -1088,6 +1145,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); 27-31: 0 (reserved) */ +#ifndef Z_SOLO /* utility functions */ @@ -1149,10 +1207,11 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, uncompress returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. */ - /* gzip file access functions */ /* @@ -1162,7 +1221,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, wrapper, documented in RFC 1952, wrapped around a deflate stream. */ -typedef voidp gzFile; /* opaque gzip file descriptor */ +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ /* ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); @@ -1172,13 +1231,28 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) Also "a" - can be used instead of "w" to request that the gzip stream that will be - written be appended to the file. "+" will result in an error, since reading - and writing to the same gzip file is not supported. + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. gzopen returns NULL if the file could not be opened, if there was insufficient memory to allocate the gzFile state, or if an invalid mode was @@ -1197,7 +1271,11 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. gzdopen returns NULL if there was insufficient memory to allocate the gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not @@ -1235,14 +1313,26 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); /* Reads the given number of uncompressed bytes from the compressed file. If - the input file was not in gzip format, gzread copies the given number of - bytes into the buffer. + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream, or failing that, reading the rest - of the input file directly without decompression. The entire input file - will be read if gzread is called until it returns less than the requested - len. + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. gzread returns the number of uncompressed bytes actually read, less than len for end of file, or -1 for error. @@ -1256,7 +1346,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file, error. */ -ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); /* Converts, formats, and writes the arguments to the compressed file under control of the format string, as in fprintf. gzprintf returns the number of @@ -1301,7 +1391,10 @@ ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); /* Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. */ ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); @@ -1397,9 +1490,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file)); ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); /* Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. This state can change from - false to true while reading the input file if the end of a gzip stream is - reached, but is followed by data that is not another gzip stream. + (0) if file is a gzip stream being decompressed. If the input file is empty, gzdirect() will return true, since the input does not contain a gzip stream. @@ -1408,6 +1499,13 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); cause buffers to be allocated to allow reading the file to determine if it is a gzip file. Therefore if gzbuffer() is used, it should be called before gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) */ ZEXTERN int ZEXPORT gzclose OF((gzFile file)); @@ -1419,7 +1517,8 @@ ZEXTERN int ZEXPORT gzclose OF((gzFile file)); must not be called more than once on the same allocation. gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, or Z_OK on success. + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. */ ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); @@ -1457,6 +1556,7 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); file that is being written concurrently. */ +#endif /* !Z_SOLO */ /* checksum functions */ @@ -1492,16 +1592,17 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. */ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); /* Update a running CRC-32 with the bytes buf[0..len-1] and return the updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the for the crc. Pre- and post-conditioning (one's - complement) is performed within this function so it shouldn't be done by the - application. + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. Usage example: @@ -1544,17 +1645,42 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, const char *version, int stream_size)); #define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) #define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) #define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) #define inflateBackInit(strm, windowBits, window) \ inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, sizeof(z_stream)) + ZLIB_VERSION, (int)sizeof(z_stream)) + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#endif /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if @@ -1562,7 +1688,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, * functions are changed to 64 bits) -- in case these are set on systems * without large file support, _LFS64_LARGEFILE must also be true */ -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +#ifdef Z_LARGE64 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); @@ -1571,14 +1697,23 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); #endif -#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0 -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# ifdef _LARGEFILE64_SOURCE +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); @@ -1595,6 +1730,13 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); #endif +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + /* hack for buggy compilers */ #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) struct internal_state {int dummy;}; @@ -1603,8 +1745,21 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, /* undocumented functions */ ZEXTERN const char * ZEXPORT zError OF((int)); ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif #ifdef __cplusplus } diff --git a/thirdparty/libz/adler32.c b/thirdparty/libz/adler32.c index 65ad6a5a..a868f073 100644 --- a/thirdparty/libz/adler32.c +++ b/thirdparty/libz/adler32.c @@ -1,5 +1,5 @@ /* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2007 Mark Adler + * Copyright (C) 1995-2011 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -9,9 +9,9 @@ #define local static -local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2); +local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); -#define BASE 65521UL /* largest prime smaller than 65536 */ +#define BASE 65521 /* largest prime smaller than 65536 */ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ @@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2); #define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); #define DO16(buf) DO8(buf,0); DO8(buf,8); -/* use NO_DIVIDE if your processor does not do division in hardware */ +/* use NO_DIVIDE if your processor does not do division in hardware -- + try it both ways to see which is faster */ #ifdef NO_DIVIDE -# define MOD(a) \ +/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 + (thank you to John Reiser for pointing this out) */ +# define CHOP(a) \ do { \ - if (a >= (BASE << 16)) a -= (BASE << 16); \ - if (a >= (BASE << 15)) a -= (BASE << 15); \ - if (a >= (BASE << 14)) a -= (BASE << 14); \ - if (a >= (BASE << 13)) a -= (BASE << 13); \ - if (a >= (BASE << 12)) a -= (BASE << 12); \ - if (a >= (BASE << 11)) a -= (BASE << 11); \ - if (a >= (BASE << 10)) a -= (BASE << 10); \ - if (a >= (BASE << 9)) a -= (BASE << 9); \ - if (a >= (BASE << 8)) a -= (BASE << 8); \ - if (a >= (BASE << 7)) a -= (BASE << 7); \ - if (a >= (BASE << 6)) a -= (BASE << 6); \ - if (a >= (BASE << 5)) a -= (BASE << 5); \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ + unsigned long tmp = a >> 16; \ + a &= 0xffffUL; \ + a += (tmp << 4) - tmp; \ + } while (0) +# define MOD28(a) \ + do { \ + CHOP(a); \ if (a >= BASE) a -= BASE; \ } while (0) -# define MOD4(a) \ +# define MOD(a) \ do { \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ + CHOP(a); \ + MOD28(a); \ + } while (0) +# define MOD63(a) \ + do { /* this assumes a is not negative */ \ + z_off64_t tmp = a >> 32; \ + a &= 0xffffffffL; \ + a += (tmp << 8) - (tmp << 5) + tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ if (a >= BASE) a -= BASE; \ } while (0) #else # define MOD(a) a %= BASE -# define MOD4(a) a %= BASE +# define MOD28(a) a %= BASE +# define MOD63(a) a %= BASE #endif /* ========================================================================= */ @@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len) } if (adler >= BASE) adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ + MOD28(sum2); /* only added so many BASE's */ return adler | (sum2 << 16); } @@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2) unsigned long sum2; unsigned rem; + /* for negative len, return invalid adler32 as a clue for debugging */ + if (len2 < 0) + return 0xffffffffUL; + /* the derivation of this formula is left as an exercise for the reader */ - rem = (unsigned)(len2 % BASE); + MOD63(len2); /* assumes len2 >= 0 */ + rem = (unsigned)len2; sum1 = adler1 & 0xffff; sum2 = rem * sum1; MOD(sum2); diff --git a/thirdparty/libz/compress.c b/thirdparty/libz/compress.c index ea4dfbe9..6e976267 100644 --- a/thirdparty/libz/compress.c +++ b/thirdparty/libz/compress.c @@ -29,7 +29,7 @@ int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) z_stream stream; int err; - stream.next_in = (Bytef*)source; + stream.next_in = (z_const Bytef *)source; stream.avail_in = (uInt)sourceLen; #ifdef MAXSEG_64K /* Check for source > 64K on 16-bit machine: */ diff --git a/thirdparty/libz/crc32.c b/thirdparty/libz/crc32.c index 91be372d..979a7190 100644 --- a/thirdparty/libz/crc32.c +++ b/thirdparty/libz/crc32.c @@ -1,5 +1,5 @@ /* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2006, 2010 Mark Adler + * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h * * Thanks to Rodney Brown for his contribution of faster @@ -17,6 +17,8 @@ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should first call get_crc_table() to initialize the tables before allowing more than one thread to use crc32(). + + DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h. */ #ifdef MAKECRCH @@ -30,31 +32,11 @@ #define local static -/* Find a four-byte integer type for crc32_little() and crc32_big(). */ -#ifndef NOBYFOUR -# ifdef STDC /* need ANSI C limits.h to determine sizes */ -# include -# define BYFOUR -# if (UINT_MAX == 0xffffffffUL) - typedef unsigned int u4; -# else -# if (ULONG_MAX == 0xffffffffUL) - typedef unsigned long u4; -# else -# if (USHRT_MAX == 0xffffffffUL) - typedef unsigned short u4; -# else -# undef BYFOUR /* can't find a four-byte integer type! */ -# endif -# endif -# endif -# endif /* STDC */ -#endif /* !NOBYFOUR */ - /* Definitions for doing the crc four data bytes at a time. */ +#if !defined(NOBYFOUR) && defined(Z_U4) +# define BYFOUR +#endif #ifdef BYFOUR -# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \ - (((w)&0xff00)<<8)+(((w)&0xff)<<24)) local unsigned long crc32_little OF((unsigned long, const unsigned char FAR *, unsigned)); local unsigned long crc32_big OF((unsigned long, @@ -68,16 +50,16 @@ local unsigned long gf2_matrix_times OF((unsigned long *mat, unsigned long vec)); local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); -local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2); +local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); #ifdef DYNAMIC_CRC_TABLE local volatile int crc_table_empty = 1; -local unsigned long FAR crc_table[TBLS][256]; +local z_crc_t FAR crc_table[TBLS][256]; local void make_crc_table OF((void)); #ifdef MAKECRCH - local void write_table OF((FILE *, const unsigned long FAR *)); + local void write_table OF((FILE *, const z_crc_t FAR *)); #endif /* MAKECRCH */ /* Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: @@ -107,9 +89,9 @@ local void make_crc_table OF((void)); */ local void make_crc_table() { - unsigned long c; + z_crc_t c; int n, k; - unsigned long poly; /* polynomial exclusive-or pattern */ + z_crc_t poly; /* polynomial exclusive-or pattern */ /* terms of polynomial defining this crc (except x^32): */ static volatile int first = 1; /* flag to limit concurrent making */ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; @@ -121,13 +103,13 @@ local void make_crc_table() first = 0; /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0UL; - for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) - poly |= 1UL << (31 - p[n]); + poly = 0; + for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++) + poly |= (z_crc_t)1 << (31 - p[n]); /* generate a crc for every 8-bit value */ for (n = 0; n < 256; n++) { - c = (unsigned long)n; + c = (z_crc_t)n; for (k = 0; k < 8; k++) c = c & 1 ? poly ^ (c >> 1) : c >> 1; crc_table[0][n] = c; @@ -138,11 +120,11 @@ local void make_crc_table() and then the byte reversal of those as well as the first table */ for (n = 0; n < 256; n++) { c = crc_table[0][n]; - crc_table[4][n] = REV(c); + crc_table[4][n] = ZSWAP32(c); for (k = 1; k < 4; k++) { c = crc_table[0][c & 0xff] ^ (c >> 8); crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); + crc_table[k + 4][n] = ZSWAP32(c); } } #endif /* BYFOUR */ @@ -164,7 +146,7 @@ local void make_crc_table() if (out == NULL) return; fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); - fprintf(out, "local const unsigned long FAR "); + fprintf(out, "local const z_crc_t FAR "); fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); write_table(out, crc_table[0]); # ifdef BYFOUR @@ -184,12 +166,13 @@ local void make_crc_table() #ifdef MAKECRCH local void write_table(out, table) FILE *out; - const unsigned long FAR *table; + const z_crc_t FAR *table; { int n; for (n = 0; n < 256; n++) - fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n], + fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", + (unsigned long)(table[n]), n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); } #endif /* MAKECRCH */ @@ -204,13 +187,13 @@ local void write_table(out, table) /* ========================================================================= * This function can be used by asm versions of crc32() */ -const unsigned long FAR * ZEXPORT get_crc_table() +const z_crc_t FAR * ZEXPORT get_crc_table() { #ifdef DYNAMIC_CRC_TABLE if (crc_table_empty) make_crc_table(); #endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; + return (const z_crc_t FAR *)crc_table; } /* ========================================================================= */ @@ -232,7 +215,7 @@ unsigned long ZEXPORT crc32(crc, buf, len) #ifdef BYFOUR if (sizeof(void *) == sizeof(ptrdiff_t)) { - u4 endian; + z_crc_t endian; endian = 1; if (*((unsigned char *)(&endian))) @@ -266,17 +249,17 @@ local unsigned long crc32_little(crc, buf, len) const unsigned char FAR *buf; unsigned len; { - register u4 c; - register const u4 FAR *buf4; + register z_crc_t c; + register const z_crc_t FAR *buf4; - c = (u4)crc; + c = (z_crc_t)crc; c = ~c; while (len && ((ptrdiff_t)buf & 3)) { c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); len--; } - buf4 = (const u4 FAR *)(const void FAR *)buf; + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; while (len >= 32) { DOLIT32; len -= 32; @@ -306,17 +289,17 @@ local unsigned long crc32_big(crc, buf, len) const unsigned char FAR *buf; unsigned len; { - register u4 c; - register const u4 FAR *buf4; + register z_crc_t c; + register const z_crc_t FAR *buf4; - c = REV((u4)crc); + c = ZSWAP32((z_crc_t)crc); c = ~c; while (len && ((ptrdiff_t)buf & 3)) { c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); len--; } - buf4 = (const u4 FAR *)(const void FAR *)buf; + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; buf4--; while (len >= 32) { DOBIG32; @@ -333,7 +316,7 @@ local unsigned long crc32_big(crc, buf, len) c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); } while (--len); c = ~c; - return (unsigned long)(REV(c)); + return (unsigned long)(ZSWAP32(c)); } #endif /* BYFOUR */ diff --git a/thirdparty/libz/crc32.h b/thirdparty/libz/crc32.h index 8053b611..9e0c7781 100644 --- a/thirdparty/libz/crc32.h +++ b/thirdparty/libz/crc32.h @@ -2,7 +2,7 @@ * Generated automatically by crc32.c */ -local const unsigned long FAR crc_table[TBLS][256] = +local const z_crc_t FAR crc_table[TBLS][256] = { { 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, diff --git a/thirdparty/libz/deflate.c b/thirdparty/libz/deflate.c index 5c4022f3..69695770 100644 --- a/thirdparty/libz/deflate.c +++ b/thirdparty/libz/deflate.c @@ -1,5 +1,5 @@ /* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler + * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -37,7 +37,7 @@ * REFERENCES * * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". - * Available in http://www.ietf.org/rfc/rfc1951.txt + * Available in http://tools.ietf.org/html/rfc1951 * * A description of the Rabin and Karp algorithm is given in the book * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. @@ -52,7 +52,7 @@ #include "deflate.h" const char deflate_copyright[] = - " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler "; + " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -155,6 +155,9 @@ local const config configuration_table[10] = { struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ #endif +/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ +#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0)) + /* =========================================================================== * Update a hash value with the given input byte * IN assertion: all calls to to UPDATE_HASH are made with consecutive @@ -235,10 +238,19 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, strm->msg = Z_NULL; if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; +#endif } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif #ifdef FASTEST if (level != 0) level = 1; @@ -293,7 +305,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || s->pending_buf == Z_NULL) { s->status = FINISH_STATE; - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); + strm->msg = ERR_MSG(Z_MEM_ERROR); deflateEnd (strm); return Z_MEM_ERROR; } @@ -314,43 +326,70 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) uInt dictLength; { deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; + uInt str, n; + int wrap; + unsigned avail; + z_const unsigned char *next; - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || - strm->state->wrap == 2 || - (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) + if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) + return Z_STREAM_ERROR; + s = strm->state; + wrap = s->wrap; + if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) return Z_STREAM_ERROR; - s = strm->state; - if (s->wrap) + /* when using zlib wrappers, compute Adler-32 for provided dictionary */ + if (wrap == 1) strm->adler = adler32(strm->adler, dictionary, dictLength); + s->wrap = 0; /* avoid computing Adler-32 in read_buf */ - if (length < MIN_MATCH) return Z_OK; - if (length > s->w_size) { - length = s->w_size; - dictionary += dictLength - length; /* use the tail of the dictionary */ + /* if dictionary would fill window, just replace the history */ + if (dictLength >= s->w_size) { + if (wrap == 0) { /* already empty otherwise */ + CLEAR_HASH(s); + s->strstart = 0; + s->block_start = 0L; + s->insert = 0; + } + dictionary += dictLength - s->w_size; /* use the tail */ + dictLength = s->w_size; } - zmemcpy(s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); + /* insert dictionary into window and hash */ + avail = strm->avail_in; + next = strm->next_in; + strm->avail_in = dictLength; + strm->next_in = (z_const Bytef *)dictionary; + fill_window(s); + while (s->lookahead >= MIN_MATCH) { + str = s->strstart; + n = s->lookahead - (MIN_MATCH-1); + do { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + } while (--n); + s->strstart = str; + s->lookahead = MIN_MATCH-1; + fill_window(s); } - if (hash_head) hash_head = 0; /* to make compiler happy */ + s->strstart += s->lookahead; + s->block_start = (long)s->strstart; + s->insert = s->lookahead; + s->lookahead = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + strm->next_in = next; + strm->avail_in = avail; + s->wrap = wrap; return Z_OK; } /* ========================================================================= */ -int ZEXPORT deflateReset (strm) +int ZEXPORT deflateResetKeep (strm) z_streamp strm; { deflate_state *s; @@ -380,11 +419,22 @@ int ZEXPORT deflateReset (strm) s->last_flush = Z_NO_FLUSH; _tr_init(s); - lm_init(s); return Z_OK; } +/* ========================================================================= */ +int ZEXPORT deflateReset (strm) + z_streamp strm; +{ + int ret; + + ret = deflateResetKeep(strm); + if (ret == Z_OK) + lm_init(strm->state); + return ret; +} + /* ========================================================================= */ int ZEXPORT deflateSetHeader (strm, head) z_streamp strm; @@ -396,15 +446,43 @@ int ZEXPORT deflateSetHeader (strm, head) return Z_OK; } +/* ========================================================================= */ +int ZEXPORT deflatePending (strm, pending, bits) + unsigned *pending; + int *bits; + z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (pending != Z_NULL) + *pending = strm->state->pending; + if (bits != Z_NULL) + *bits = strm->state->bi_valid; + return Z_OK; +} + /* ========================================================================= */ int ZEXPORT deflatePrime (strm, bits, value) z_streamp strm; int bits; int value; { + deflate_state *s; + int put; + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - strm->state->bi_valid = bits; - strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); + s = strm->state; + if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) + return Z_BUF_ERROR; + do { + put = Buf_size - s->bi_valid; + if (put > bits) + put = bits; + s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); + s->bi_valid += put; + _tr_flush_bits(s); + value >>= put; + bits -= put; + } while (bits); return Z_OK; } @@ -435,6 +513,8 @@ int ZEXPORT deflateParams(strm, level, strategy) strm->total_in != 0) { /* Flush the last buffer: */ err = deflate(strm, Z_BLOCK); + if (err == Z_BUF_ERROR && s->pending == 0) + err = Z_OK; } if (s->level != level) { s->level = level; @@ -562,19 +642,22 @@ local void putShortMSB (s, b) local void flush_pending(strm) z_streamp strm; { - unsigned len = strm->state->pending; + unsigned len; + deflate_state *s = strm->state; + _tr_flush_bits(s); + len = s->pending; if (len > strm->avail_out) len = strm->avail_out; if (len == 0) return; - zmemcpy(strm->next_out, strm->state->pending_out, len); + zmemcpy(strm->next_out, s->pending_out, len); strm->next_out += len; - strm->state->pending_out += len; + s->pending_out += len; strm->total_out += len; strm->avail_out -= len; - strm->state->pending -= len; - if (strm->state->pending == 0) { - strm->state->pending_out = strm->state->pending_buf; + s->pending -= len; + if (s->pending == 0) { + s->pending_out = s->pending_buf; } } @@ -801,7 +884,7 @@ int ZEXPORT deflate (strm, flush) * flushes. For repeated and useless calls with Z_FINISH, we keep * returning Z_STREAM_END instead of Z_BUF_ERROR. */ - } else if (strm->avail_in == 0 && flush <= old_flush && + } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && flush != Z_FINISH) { ERR_RETURN(strm, Z_BUF_ERROR); } @@ -850,6 +933,7 @@ int ZEXPORT deflate (strm, flush) if (s->lookahead == 0) { s->strstart = 0; s->block_start = 0L; + s->insert = 0; } } } @@ -945,12 +1029,12 @@ int ZEXPORT deflateCopy (dest, source) ss = source->state; - zmemcpy(dest, source, sizeof(z_stream)); + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); if (ds == Z_NULL) return Z_MEM_ERROR; dest->state = (struct internal_state FAR *) ds; - zmemcpy(ds, ss, sizeof(deflate_state)); + zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); ds->strm = dest; ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); @@ -966,8 +1050,8 @@ int ZEXPORT deflateCopy (dest, source) } /* following zmemcpy do not work for 16-bit MSDOS */ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); - zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); @@ -1001,15 +1085,15 @@ local int read_buf(strm, buf, size) strm->avail_in -= len; + zmemcpy(buf, strm->next_in, len); if (strm->state->wrap == 1) { - strm->adler = adler32(strm->adler, strm->next_in, len); + strm->adler = adler32(strm->adler, buf, len); } #ifdef GZIP else if (strm->state->wrap == 2) { - strm->adler = crc32(strm->adler, strm->next_in, len); + strm->adler = crc32(strm->adler, buf, len); } #endif - zmemcpy(buf, strm->next_in, len); strm->next_in += len; strm->total_in += len; @@ -1036,6 +1120,7 @@ local void lm_init (s) s->strstart = 0; s->block_start = 0L; s->lookahead = 0; + s->insert = 0; s->match_length = s->prev_length = MIN_MATCH-1; s->match_available = 0; s->ins_h = 0; @@ -1310,6 +1395,8 @@ local void fill_window(s) unsigned more; /* Amount of free space at the end of the window. */ uInt wsize = s->w_size; + Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); + do { more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); @@ -1362,7 +1449,7 @@ local void fill_window(s) #endif more += wsize; } - if (s->strm->avail_in == 0) return; + if (s->strm->avail_in == 0) break; /* If there was no sliding: * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && @@ -1381,12 +1468,24 @@ local void fill_window(s) s->lookahead += n; /* Initialize the hash value now that we have some input: */ - if (s->lookahead >= MIN_MATCH) { - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); + if (s->lookahead + s->insert >= MIN_MATCH) { + uInt str = s->strstart - s->insert; + s->ins_h = s->window[str]; + UPDATE_HASH(s, s->ins_h, s->window[str + 1]); #if MIN_MATCH != 3 Call UPDATE_HASH() MIN_MATCH-3 more times #endif + while (s->insert) { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + s->insert--; + if (s->lookahead + s->insert < MIN_MATCH) + break; + } } /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, * but this is not important since only literal bytes will be emitted. @@ -1427,6 +1526,9 @@ local void fill_window(s) s->high_water += init; } } + + Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, + "not enough room for search"); } /* =========================================================================== @@ -1506,8 +1608,14 @@ local block_state deflate_stored(s, flush) FLUSH_BLOCK(s, 0); } } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if ((long)s->strstart > s->block_start) + FLUSH_BLOCK(s, 0); + return block_done; } /* =========================================================================== @@ -1603,8 +1711,14 @@ local block_state deflate_fast(s, flush) } if (bflush) FLUSH_BLOCK(s, 0); } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; } #ifndef FASTEST @@ -1728,8 +1842,14 @@ local block_state deflate_slow(s, flush) _tr_tally_lit(s, s->window[s->strstart-1], bflush); s->match_available = 0; } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; } #endif /* FASTEST */ @@ -1749,11 +1869,11 @@ local block_state deflate_rle(s, flush) for (;;) { /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes - * for the longest encodable run. + * for the longest run, plus one for the unrolled loop. */ - if (s->lookahead < MAX_MATCH) { + if (s->lookahead <= MAX_MATCH) { fill_window(s); - if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { + if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { return need_more; } if (s->lookahead == 0) break; /* flush the current block */ @@ -1776,6 +1896,7 @@ local block_state deflate_rle(s, flush) if (s->match_length > s->lookahead) s->match_length = s->lookahead; } + Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); } /* Emit match if have run of MIN_MATCH or longer, else emit literal */ @@ -1796,8 +1917,14 @@ local block_state deflate_rle(s, flush) } if (bflush) FLUSH_BLOCK(s, 0); } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; } /* =========================================================================== @@ -1829,6 +1956,12 @@ local block_state deflate_huff(s, flush) s->strstart++; if (bflush) FLUSH_BLOCK(s, 0); } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; } diff --git a/thirdparty/libz/deflate.h b/thirdparty/libz/deflate.h index cbf0d1ea..ce0299ed 100644 --- a/thirdparty/libz/deflate.h +++ b/thirdparty/libz/deflate.h @@ -1,5 +1,5 @@ /* deflate.h -- internal compression state - * Copyright (C) 1995-2010 Jean-loup Gailly + * Copyright (C) 1995-2012 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -48,6 +48,9 @@ #define MAX_BITS 15 /* All codes must not exceed MAX_BITS bits */ +#define Buf_size 16 +/* size of bit buffer in bi_buf */ + #define INIT_STATE 42 #define EXTRA_STATE 69 #define NAME_STATE 73 @@ -101,7 +104,7 @@ typedef struct internal_state { int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ gz_headerp gzhead; /* gzip header information to write */ uInt gzindex; /* where in extra, name, or comment */ - Byte method; /* STORED (for zip only) or DEFLATED */ + Byte method; /* can only be DEFLATED */ int last_flush; /* value of flush param for previous deflate call */ /* used by deflate.c: */ @@ -188,7 +191,7 @@ typedef struct internal_state { int nice_match; /* Stop searching when current match exceeds this */ /* used by trees.c: */ - /* Didn't use ct_data typedef below to supress compiler warning */ + /* Didn't use ct_data typedef below to suppress compiler warning */ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ @@ -244,7 +247,7 @@ typedef struct internal_state { ulg opt_len; /* bit length of current block with optimal trees */ ulg static_len; /* bit length of current block with static trees */ uInt matches; /* number of string matches in current block */ - int last_eob_len; /* bit length of EOB code for last block */ + uInt insert; /* bytes at end of window left to insert */ #ifdef DEBUG ulg compressed_len; /* total bit length of compressed file mod 2^32 */ @@ -294,6 +297,7 @@ void ZLIB_INTERNAL _tr_init OF((deflate_state *s)); int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, int last)); +void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s)); void ZLIB_INTERNAL _tr_align OF((deflate_state *s)); void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, int last)); diff --git a/thirdparty/libz/example.c b/thirdparty/libz/example.c deleted file mode 100644 index 604736f1..00000000 --- a/thirdparty/libz/example.c +++ /dev/null @@ -1,565 +0,0 @@ -/* example.c -- usage example of the zlib compression library - * Copyright (C) 1995-2006 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#include "zlib.h" -#include - -#ifdef STDC -# include -# include -#endif - -#if defined(VMS) || defined(RISCOS) -# define TESTFILE "foo-gz" -#else -# define TESTFILE "foo.gz" -#endif - -#define CHECK_ERR(err, msg) { \ - if (err != Z_OK) { \ - fprintf(stderr, "%s error: %d\n", msg, err); \ - exit(1); \ - } \ -} - -const char hello[] = "hello, hello!"; -/* "hello world" would be more standard, but the repeated "hello" - * stresses the compression code better, sorry... - */ - -const char dictionary[] = "hello"; -uLong dictId; /* Adler32 value of the dictionary */ - -void test_compress OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_gzio OF((const char *fname, - Byte *uncompr, uLong uncomprLen)); -void test_deflate OF((Byte *compr, uLong comprLen)); -void test_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_large_deflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_large_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_flush OF((Byte *compr, uLong *comprLen)); -void test_sync OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -void test_dict_deflate OF((Byte *compr, uLong comprLen)); -void test_dict_inflate OF((Byte *compr, uLong comprLen, - Byte *uncompr, uLong uncomprLen)); -int main OF((int argc, char *argv[])); - -/* =========================================================================== - * Test compress() and uncompress() - */ -void test_compress(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - uLong len = (uLong)strlen(hello)+1; - - err = compress(compr, &comprLen, (const Bytef*)hello, len); - CHECK_ERR(err, "compress"); - - strcpy((char*)uncompr, "garbage"); - - err = uncompress(uncompr, &uncomprLen, compr, comprLen); - CHECK_ERR(err, "uncompress"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad uncompress\n"); - exit(1); - } else { - printf("uncompress(): %s\n", (char *)uncompr); - } -} - -/* =========================================================================== - * Test read/write of .gz files - */ -void test_gzio(fname, uncompr, uncomprLen) - const char *fname; /* compressed file name */ - Byte *uncompr; - uLong uncomprLen; -{ -#ifdef NO_GZCOMPRESS - fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); -#else - int err; - int len = (int)strlen(hello)+1; - gzFile file; - z_off_t pos; - - file = gzopen(fname, "wb"); - if (file == NULL) { - fprintf(stderr, "gzopen error\n"); - exit(1); - } - gzputc(file, 'h'); - if (gzputs(file, "ello") != 4) { - fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); - exit(1); - } - if (gzprintf(file, ", %s!", "hello") != 8) { - fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); - exit(1); - } - gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ - gzclose(file); - - file = gzopen(fname, "rb"); - if (file == NULL) { - fprintf(stderr, "gzopen error\n"); - exit(1); - } - strcpy((char*)uncompr, "garbage"); - - if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { - fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); - exit(1); - } - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); - exit(1); - } else { - printf("gzread(): %s\n", (char*)uncompr); - } - - pos = gzseek(file, -8L, SEEK_CUR); - if (pos != 6 || gztell(file) != pos) { - fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", - (long)pos, (long)gztell(file)); - exit(1); - } - - if (gzgetc(file) != ' ') { - fprintf(stderr, "gzgetc error\n"); - exit(1); - } - - if (gzungetc(' ', file) != ' ') { - fprintf(stderr, "gzungetc error\n"); - exit(1); - } - - gzgets(file, (char*)uncompr, (int)uncomprLen); - if (strlen((char*)uncompr) != 7) { /* " hello!" */ - fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); - exit(1); - } - if (strcmp((char*)uncompr, hello + 6)) { - fprintf(stderr, "bad gzgets after gzseek\n"); - exit(1); - } else { - printf("gzgets() after gzseek: %s\n", (char*)uncompr); - } - - gzclose(file); -#endif -} - -/* =========================================================================== - * Test deflate() with small buffers - */ -void test_deflate(compr, comprLen) - Byte *compr; - uLong comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - uLong len = (uLong)strlen(hello)+1; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_in = (Bytef*)hello; - c_stream.next_out = compr; - - while (c_stream.total_in != len && c_stream.total_out < comprLen) { - c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - } - /* Finish the stream, still forcing small buffers: */ - for (;;) { - c_stream.avail_out = 1; - err = deflate(&c_stream, Z_FINISH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "deflate"); - } - - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with small buffers - */ -void test_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - d_stream.next_in = compr; - d_stream.avail_in = 0; - d_stream.next_out = uncompr; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { - d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "inflate"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad inflate\n"); - exit(1); - } else { - printf("inflate(): %s\n", (char *)uncompr); - } -} - -/* =========================================================================== - * Test deflate() with large buffers and dynamic change of compression level - */ -void test_large_deflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_BEST_SPEED); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_out = compr; - c_stream.avail_out = (uInt)comprLen; - - /* At this point, uncompr is still mostly zeroes, so it should compress - * very well: - */ - c_stream.next_in = uncompr; - c_stream.avail_in = (uInt)uncomprLen; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - if (c_stream.avail_in != 0) { - fprintf(stderr, "deflate not greedy\n"); - exit(1); - } - - /* Feed in already compressed data and switch to no compression: */ - deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); - c_stream.next_in = compr; - c_stream.avail_in = (uInt)comprLen/2; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - - /* Switch back to compressing mode: */ - deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); - c_stream.next_in = uncompr; - c_stream.avail_in = (uInt)uncomprLen; - err = deflate(&c_stream, Z_NO_FLUSH); - CHECK_ERR(err, "deflate"); - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - fprintf(stderr, "deflate should report Z_STREAM_END\n"); - exit(1); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with large buffers - */ -void test_large_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - d_stream.next_in = compr; - d_stream.avail_in = (uInt)comprLen; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - for (;;) { - d_stream.next_out = uncompr; /* discard the output */ - d_stream.avail_out = (uInt)uncomprLen; - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - CHECK_ERR(err, "large inflate"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (d_stream.total_out != 2*uncomprLen + comprLen/2) { - fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); - exit(1); - } else { - printf("large_inflate(): OK\n"); - } -} - -/* =========================================================================== - * Test deflate() with full flush - */ -void test_flush(compr, comprLen) - Byte *compr; - uLong *comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - uInt len = (uInt)strlen(hello)+1; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - c_stream.next_in = (Bytef*)hello; - c_stream.next_out = compr; - c_stream.avail_in = 3; - c_stream.avail_out = (uInt)*comprLen; - err = deflate(&c_stream, Z_FULL_FLUSH); - CHECK_ERR(err, "deflate"); - - compr[3]++; /* force an error in first compressed block */ - c_stream.avail_in = len - 3; - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - CHECK_ERR(err, "deflate"); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); - - *comprLen = c_stream.total_out; -} - -/* =========================================================================== - * Test inflateSync() - */ -void test_sync(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - d_stream.next_in = compr; - d_stream.avail_in = 2; /* just read the zlib header */ - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_out = uncompr; - d_stream.avail_out = (uInt)uncomprLen; - - inflate(&d_stream, Z_NO_FLUSH); - CHECK_ERR(err, "inflate"); - - d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ - err = inflateSync(&d_stream); /* but skip the damaged part */ - CHECK_ERR(err, "inflateSync"); - - err = inflate(&d_stream, Z_FINISH); - if (err != Z_DATA_ERROR) { - fprintf(stderr, "inflate should report DATA_ERROR\n"); - /* Because of incorrect adler32 */ - exit(1); - } - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - printf("after inflateSync(): hel%s\n", (char *)uncompr); -} - -/* =========================================================================== - * Test deflate() with preset dictionary - */ -void test_dict_deflate(compr, comprLen) - Byte *compr; - uLong comprLen; -{ - z_stream c_stream; /* compression stream */ - int err; - - c_stream.zalloc = (alloc_func)0; - c_stream.zfree = (free_func)0; - c_stream.opaque = (voidpf)0; - - err = deflateInit(&c_stream, Z_BEST_COMPRESSION); - CHECK_ERR(err, "deflateInit"); - - err = deflateSetDictionary(&c_stream, - (const Bytef*)dictionary, sizeof(dictionary)); - CHECK_ERR(err, "deflateSetDictionary"); - - dictId = c_stream.adler; - c_stream.next_out = compr; - c_stream.avail_out = (uInt)comprLen; - - c_stream.next_in = (Bytef*)hello; - c_stream.avail_in = (uInt)strlen(hello)+1; - - err = deflate(&c_stream, Z_FINISH); - if (err != Z_STREAM_END) { - fprintf(stderr, "deflate should report Z_STREAM_END\n"); - exit(1); - } - err = deflateEnd(&c_stream); - CHECK_ERR(err, "deflateEnd"); -} - -/* =========================================================================== - * Test inflate() with a preset dictionary - */ -void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) - Byte *compr, *uncompr; - uLong comprLen, uncomprLen; -{ - int err; - z_stream d_stream; /* decompression stream */ - - strcpy((char*)uncompr, "garbage"); - - d_stream.zalloc = (alloc_func)0; - d_stream.zfree = (free_func)0; - d_stream.opaque = (voidpf)0; - - d_stream.next_in = compr; - d_stream.avail_in = (uInt)comprLen; - - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - - d_stream.next_out = uncompr; - d_stream.avail_out = (uInt)uncomprLen; - - for (;;) { - err = inflate(&d_stream, Z_NO_FLUSH); - if (err == Z_STREAM_END) break; - if (err == Z_NEED_DICT) { - if (d_stream.adler != dictId) { - fprintf(stderr, "unexpected dictionary"); - exit(1); - } - err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, - sizeof(dictionary)); - } - CHECK_ERR(err, "inflate with dict"); - } - - err = inflateEnd(&d_stream); - CHECK_ERR(err, "inflateEnd"); - - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad inflate with dict\n"); - exit(1); - } else { - printf("inflate with dictionary: %s\n", (char *)uncompr); - } -} - -/* =========================================================================== - * Usage: example [output.gz [input.gz]] - */ - -int main(argc, argv) - int argc; - char *argv[]; -{ - Byte *compr, *uncompr; - uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ - uLong uncomprLen = comprLen; - static const char* myVersion = ZLIB_VERSION; - - if (zlibVersion()[0] != myVersion[0]) { - fprintf(stderr, "incompatible zlib version\n"); - exit(1); - - } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { - fprintf(stderr, "warning: different zlib version\n"); - } - - printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", - ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); - - compr = (Byte*)calloc((uInt)comprLen, 1); - uncompr = (Byte*)calloc((uInt)uncomprLen, 1); - /* compr and uncompr are cleared to avoid reading uninitialized - * data and to ensure that uncompr compresses well. - */ - if (compr == Z_NULL || uncompr == Z_NULL) { - printf("out of memory\n"); - exit(1); - } - test_compress(compr, comprLen, uncompr, uncomprLen); - - test_gzio((argc > 1 ? argv[1] : TESTFILE), - uncompr, uncomprLen); - - test_deflate(compr, comprLen); - test_inflate(compr, comprLen, uncompr, uncomprLen); - - test_large_deflate(compr, comprLen, uncompr, uncomprLen); - test_large_inflate(compr, comprLen, uncompr, uncomprLen); - - test_flush(compr, &comprLen); - test_sync(compr, comprLen, uncompr, uncomprLen); - comprLen = uncomprLen; - - test_dict_deflate(compr, comprLen); - test_dict_inflate(compr, comprLen, uncompr, uncomprLen); - - free(compr); - free(uncompr); - - return 0; -} diff --git a/thirdparty/libz/gzguts.h b/thirdparty/libz/gzguts.h index 0f8fb79f..d87659d0 100644 --- a/thirdparty/libz/gzguts.h +++ b/thirdparty/libz/gzguts.h @@ -1,5 +1,5 @@ /* gzguts.h -- zlib internal header definitions for gz* operations - * Copyright (C) 2004, 2005, 2010 Mark Adler + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -12,7 +12,7 @@ # endif #endif -#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ) +#ifdef HAVE_HIDDEN # define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) #else # define ZLIB_INTERNAL @@ -27,13 +27,80 @@ #endif #include +#ifdef _WIN32 +# include +#endif + +#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) +# include +#endif + +#ifdef WINAPI_FAMILY +# define open _open +# define read _read +# define write _write +# define close _close +#endif + #ifdef NO_DEFLATE /* for compatibility with old definition */ # define NO_GZCOMPRESS #endif +#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(__CYGWIN__) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#ifndef HAVE_VSNPRINTF +# ifdef MSDOS +/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), + but for now we just assume it doesn't. */ +# define NO_vsnprintf +# endif +# ifdef __TURBOC__ +# define NO_vsnprintf +# endif +# ifdef WIN32 +/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ +# if !defined(vsnprintf) && !defined(NO_vsnprintf) +# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) +# define vsnprintf _vsnprintf +# endif +# endif +# endif +# ifdef __SASC +# define NO_vsnprintf +# endif +# ifdef VMS +# define NO_vsnprintf +# endif +# ifdef __OS400__ +# define NO_vsnprintf +# endif +# ifdef __MVS__ +# define NO_vsnprintf +# endif +#endif + +/* unlike snprintf (which is required in C99, yet still not supported by + Microsoft more than a decade later!), _snprintf does not guarantee null + termination of the result -- however this is only used in gzlib.c where + the result is assured to fit in the space provided */ #ifdef _MSC_VER -# include -# define vsnprintf _vsnprintf +# define snprintf _snprintf #endif #ifndef local @@ -52,7 +119,7 @@ # include # define zstrerror() gz_strwinerror((DWORD)GetLastError()) #else -# ifdef STDC +# ifndef NO_STRERROR # include # define zstrerror() strerror(errno) # else @@ -68,7 +135,15 @@ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); #endif -/* default i/o buffer size -- double this for output when reading */ +/* default memLevel */ +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif + +/* default i/o buffer size -- double this for output when reading (this and + twice this must be able to fit in an unsigned type) */ #define GZBUFSIZE 8192 /* gzip modes, also provide a little integrity check on the passed structure */ @@ -84,23 +159,25 @@ /* internal gzip file state data structure */ typedef struct { + /* exposed contents for gzgetc() macro */ + struct gzFile_s x; /* "x" for exposed */ + /* x.have: number of bytes available at x.next */ + /* x.next: next output data to deliver or write */ + /* x.pos: current position in uncompressed data */ /* used for both reading and writing */ int mode; /* see gzip modes above */ int fd; /* file descriptor */ char *path; /* path or fd for error messages */ - z_off64_t pos; /* current position in uncompressed data */ unsigned size; /* buffer size, zero if not allocated yet */ unsigned want; /* requested buffer size, default is GZBUFSIZE */ unsigned char *in; /* input buffer */ unsigned char *out; /* output buffer (double-sized when reading) */ - unsigned char *next; /* next output data to deliver or write */ + int direct; /* 0 if processing gzip, 1 if transparent */ /* just for reading */ - unsigned have; /* amount of output data unused at next */ - int eof; /* true if end of input file reached */ - z_off64_t start; /* where the gzip data started, for rewinding */ - z_off64_t raw; /* where the raw data started, for seeking */ int how; /* 0: get header, 1: copy, 2: decompress */ - int direct; /* true if last read direct, false if gzip */ + z_off64_t start; /* where the gzip data started, for rewinding */ + int eof; /* true if end of input file reached */ + int past; /* true if read requested past end */ /* just for writing */ int level; /* compression level */ int strategy; /* compression strategy */ diff --git a/thirdparty/libz/gzlib.c b/thirdparty/libz/gzlib.c index 603e60ed..fae202ef 100644 --- a/thirdparty/libz/gzlib.c +++ b/thirdparty/libz/gzlib.c @@ -1,19 +1,23 @@ /* gzlib.c -- zlib functions common to reading and writing gzip files - * Copyright (C) 2004, 2010 Mark Adler + * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ #include "gzguts.h" +#if defined(_WIN32) && !defined(__BORLANDC__) +# define LSEEK _lseeki64 +#else #if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 # define LSEEK lseek64 #else # define LSEEK lseek #endif +#endif /* Local functions */ local void gz_reset OF((gz_statep)); -local gzFile gz_open OF((const char *, int, const char *)); +local gzFile gz_open OF((const void *, int, const char *)); #if defined UNDER_CE @@ -71,28 +75,40 @@ char ZLIB_INTERNAL *gz_strwinerror (error) local void gz_reset(state) gz_statep state; { + state->x.have = 0; /* no output data available */ if (state->mode == GZ_READ) { /* for reading ... */ - state->have = 0; /* no output data available */ state->eof = 0; /* not at end of file */ + state->past = 0; /* have not read past end yet */ state->how = LOOK; /* look for gzip header */ - state->direct = 1; /* default for empty file */ } state->seek = 0; /* no seek request pending */ gz_error(state, Z_OK, NULL); /* clear error */ - state->pos = 0; /* no uncompressed data yet */ + state->x.pos = 0; /* no uncompressed data yet */ state->strm.avail_in = 0; /* no input data yet */ } /* Open a gzip file either by name or file descriptor. */ local gzFile gz_open(path, fd, mode) - const char *path; + const void *path; int fd; const char *mode; { gz_statep state; + size_t len; + int oflag; +#ifdef O_CLOEXEC + int cloexec = 0; +#endif +#ifdef O_EXCL + int exclusive = 0; +#endif + + /* check input */ + if (path == NULL) + return NULL; /* allocate gzFile structure to return */ - state = malloc(sizeof(gz_state)); + state = (gz_statep)malloc(sizeof(gz_state)); if (state == NULL) return NULL; state->size = 0; /* no buffers allocated yet */ @@ -103,6 +119,7 @@ local gzFile gz_open(path, fd, mode) state->mode = GZ_NONE; state->level = Z_DEFAULT_COMPRESSION; state->strategy = Z_DEFAULT_STRATEGY; + state->direct = 0; while (*mode) { if (*mode >= '0' && *mode <= '9') state->level = *mode - '0'; @@ -124,6 +141,16 @@ local gzFile gz_open(path, fd, mode) return NULL; case 'b': /* ignore -- will request binary anyway */ break; +#ifdef O_CLOEXEC + case 'e': + cloexec = 1; + break; +#endif +#ifdef O_EXCL + case 'x': + exclusive = 1; + break; +#endif case 'f': state->strategy = Z_FILTERED; break; @@ -135,6 +162,10 @@ local gzFile gz_open(path, fd, mode) break; case 'F': state->strategy = Z_FIXED; + break; + case 'T': + state->direct = 1; + break; default: /* could consider as an error, but just ignore */ ; } @@ -147,30 +178,71 @@ local gzFile gz_open(path, fd, mode) return NULL; } + /* can't force transparent read */ + if (state->mode == GZ_READ) { + if (state->direct) { + free(state); + return NULL; + } + state->direct = 1; /* for empty file */ + } + /* save the path name for error messages */ - state->path = malloc(strlen(path) + 1); +#ifdef _WIN32 + if (fd == -2) { + len = wcstombs(NULL, path, 0); + if (len == (size_t)-1) + len = 0; + } + else +#endif + len = strlen((const char *)path); + state->path = (char *)malloc(len + 1); if (state->path == NULL) { free(state); return NULL; } - strcpy(state->path, path); +#ifdef _WIN32 + if (fd == -2) + if (len) + wcstombs(state->path, path, len + 1); + else + *(state->path) = 0; + else +#endif +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->path, len + 1, "%s", (const char *)path); +#else + strcpy(state->path, path); +#endif - /* open the file with the appropriate mode (or just use fd) */ - state->fd = fd != -1 ? fd : - open(path, + /* compute the flags for open() */ + oflag = #ifdef O_LARGEFILE - O_LARGEFILE | + O_LARGEFILE | #endif #ifdef O_BINARY - O_BINARY | + O_BINARY | #endif - (state->mode == GZ_READ ? - O_RDONLY : - (O_WRONLY | O_CREAT | ( - state->mode == GZ_WRITE ? - O_TRUNC : - O_APPEND))), - 0666); +#ifdef O_CLOEXEC + (cloexec ? O_CLOEXEC : 0) | +#endif + (state->mode == GZ_READ ? + O_RDONLY : + (O_WRONLY | O_CREAT | +#ifdef O_EXCL + (exclusive ? O_EXCL : 0) | +#endif + (state->mode == GZ_WRITE ? + O_TRUNC : + O_APPEND))); + + /* open the file with the appropriate flags (or just use fd) */ + state->fd = fd > -1 ? fd : ( +#ifdef _WIN32 + fd == -2 ? _wopen(path, oflag, 0666) : +#endif + open((const char *)path, oflag, 0666)); if (state->fd == -1) { free(state->path); free(state); @@ -216,14 +288,28 @@ gzFile ZEXPORT gzdopen(fd, mode) char *path; /* identifier for error messages */ gzFile gz; - if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL) + if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL) return NULL; +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(path, 7 + 3 * sizeof(int), "", fd); /* for debugging */ +#else sprintf(path, "", fd); /* for debugging */ +#endif gz = gz_open(path, fd, mode); free(path); return gz; } +/* -- see zlib.h -- */ +#ifdef _WIN32 +gzFile ZEXPORT gzopen_w(path, mode) + const wchar_t *path; + const char *mode; +{ + return gz_open(path, -2, mode); +} +#endif + /* -- see zlib.h -- */ int ZEXPORT gzbuffer(file, size) gzFile file; @@ -243,8 +329,8 @@ int ZEXPORT gzbuffer(file, size) return -1; /* check and set requested size */ - if (size == 0) - return -1; + if (size < 2) + size = 2; /* need two bytes to check magic header */ state->want = size; return 0; } @@ -261,7 +347,8 @@ int ZEXPORT gzrewind(file) state = (gz_statep)file; /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || state->err != Z_OK) + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) return -1; /* back up and start over */ @@ -289,7 +376,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence) return -1; /* check that there's no error */ - if (state->err != Z_OK) + if (state->err != Z_OK && state->err != Z_BUF_ERROR) return -1; /* can only seek from start or relative to current position */ @@ -298,31 +385,32 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence) /* normalize offset to a SEEK_CUR specification */ if (whence == SEEK_SET) - offset -= state->pos; + offset -= state->x.pos; else if (state->seek) offset += state->skip; state->seek = 0; /* if within raw area while reading, just go there */ if (state->mode == GZ_READ && state->how == COPY && - state->pos + offset >= state->raw) { - ret = LSEEK(state->fd, offset - state->have, SEEK_CUR); + state->x.pos + offset >= 0) { + ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR); if (ret == -1) return -1; - state->have = 0; + state->x.have = 0; state->eof = 0; + state->past = 0; state->seek = 0; gz_error(state, Z_OK, NULL); state->strm.avail_in = 0; - state->pos += offset; - return state->pos; + state->x.pos += offset; + return state->x.pos; } /* calculate skip amount, rewinding if needed for back seek when reading */ if (offset < 0) { if (state->mode != GZ_READ) /* writing -- can't go backwards */ return -1; - offset += state->pos; + offset += state->x.pos; if (offset < 0) /* before start of file! */ return -1; if (gzrewind(file) == -1) /* rewind, then skip to offset */ @@ -331,11 +419,11 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence) /* if reading, skip what's in output buffer (one less gzgetc() check) */ if (state->mode == GZ_READ) { - n = GT_OFF(state->have) || (z_off64_t)state->have > offset ? - (unsigned)offset : state->have; - state->have -= n; - state->next += n; - state->pos += n; + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? + (unsigned)offset : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; offset -= n; } @@ -344,7 +432,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence) state->seek = 1; state->skip = offset; } - return state->pos + offset; + return state->x.pos + offset; } /* -- see zlib.h -- */ @@ -373,7 +461,7 @@ z_off64_t ZEXPORT gztell64(file) return -1; /* return position */ - return state->pos + (state->seek ? state->skip : 0); + return state->x.pos + (state->seek ? state->skip : 0); } /* -- see zlib.h -- */ @@ -433,8 +521,7 @@ int ZEXPORT gzeof(file) return 0; /* return end-of-file state */ - return state->mode == GZ_READ ? - (state->eof && state->strm.avail_in == 0 && state->have == 0) : 0; + return state->mode == GZ_READ ? state->past : 0; } /* -- see zlib.h -- */ @@ -454,7 +541,8 @@ const char * ZEXPORT gzerror(file, errnum) /* return error information */ if (errnum != NULL) *errnum = state->err; - return state->msg == NULL ? "" : state->msg; + return state->err == Z_MEM_ERROR ? "out of memory" : + (state->msg == NULL ? "" : state->msg); } /* -- see zlib.h -- */ @@ -471,8 +559,10 @@ void ZEXPORT gzclearerr(file) return; /* clear error and end-of-file */ - if (state->mode == GZ_READ) + if (state->mode == GZ_READ) { state->eof = 0; + state->past = 0; + } gz_error(state, Z_OK, NULL); } @@ -494,26 +584,33 @@ void ZLIB_INTERNAL gz_error(state, err, msg) state->msg = NULL; } + /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ + if (err != Z_OK && err != Z_BUF_ERROR) + state->x.have = 0; + /* set error code, and if no message, then done */ state->err = err; if (msg == NULL) return; - /* for an out of memory error, save as static string */ - if (err == Z_MEM_ERROR) { - state->msg = (char *)msg; + /* for an out of memory error, return literal string when requested */ + if (err == Z_MEM_ERROR) return; - } /* construct error message with path */ - if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) { + if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) == + NULL) { state->err = Z_MEM_ERROR; - state->msg = (char *)"out of memory"; return; } +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->msg, strlen(state->path) + strlen(msg) + 3, + "%s%s%s", state->path, ": ", msg); +#else strcpy(state->msg, state->path); strcat(state->msg, ": "); strcat(state->msg, msg); +#endif return; } diff --git a/thirdparty/libz/gzread.c b/thirdparty/libz/gzread.c index 548201ab..bf4538eb 100644 --- a/thirdparty/libz/gzread.c +++ b/thirdparty/libz/gzread.c @@ -1,5 +1,5 @@ /* gzread.c -- zlib functions for reading gzip files - * Copyright (C) 2004, 2005, 2010 Mark Adler + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -8,10 +8,9 @@ /* Local functions */ local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *)); local int gz_avail OF((gz_statep)); -local int gz_next4 OF((gz_statep, unsigned long *)); -local int gz_head OF((gz_statep)); +local int gz_look OF((gz_statep)); local int gz_decomp OF((gz_statep)); -local int gz_make OF((gz_statep)); +local int gz_fetch OF((gz_statep)); local int gz_skip OF((gz_statep, z_off64_t)); /* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from @@ -46,73 +45,54 @@ local int gz_load(state, buf, len, have) error, 0 otherwise. Note that the eof flag is set when the end of the input file is reached, even though there may be unused data in the buffer. Once that data has been used, no more attempts will be made to read the file. - gz_avail() assumes that strm->avail_in == 0. */ + If strm->avail_in != 0, then the current data is moved to the beginning of + the input buffer, and then the remainder of the buffer is loaded with the + available data from the input file. */ local int gz_avail(state) gz_statep state; { + unsigned got; z_streamp strm = &(state->strm); - if (state->err != Z_OK) + if (state->err != Z_OK && state->err != Z_BUF_ERROR) return -1; if (state->eof == 0) { - if (gz_load(state, state->in, state->size, - (unsigned *)&(strm->avail_in)) == -1) + if (strm->avail_in) { /* copy what's there to the start */ + unsigned char *p = state->in; + unsigned const char *q = strm->next_in; + unsigned n = strm->avail_in; + do { + *p++ = *q++; + } while (--n); + } + if (gz_load(state, state->in + strm->avail_in, + state->size - strm->avail_in, &got) == -1) return -1; + strm->avail_in += got; strm->next_in = state->in; } return 0; } -/* Get next byte from input, or -1 if end or error. */ -#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \ - (strm->avail_in == 0 ? -1 : \ - (strm->avail_in--, *(strm->next_in)++))) - -/* Get a four-byte little-endian integer and return 0 on success and the value - in *ret. Otherwise -1 is returned and *ret is not modified. */ -local int gz_next4(state, ret) - gz_statep state; - unsigned long *ret; -{ - int ch; - unsigned long val; - z_streamp strm = &(state->strm); - - val = NEXT(); - val += (unsigned)NEXT() << 8; - val += (unsigned long)NEXT() << 16; - ch = NEXT(); - if (ch == -1) - return -1; - val += (unsigned long)ch << 24; - *ret = val; - return 0; -} - -/* Look for gzip header, set up for inflate or copy. state->have must be zero. +/* Look for gzip header, set up for inflate or copy. state->x.have must be 0. If this is the first time in, allocate required memory. state->how will be left unchanged if there is no more input data available, will be set to COPY if there is no gzip header and direct copying will be performed, or it will - be set to GZIP for decompression, and the gzip header will be skipped so - that the next available input data is the raw deflate stream. If direct - copying, then leftover input data from the input buffer will be copied to - the output buffer. In that case, all further file reads will be directly to - either the output buffer or a user buffer. If decompressing, the inflate - state and the check value will be initialized. gz_head() will return 0 on - success or -1 on failure. Failures may include read errors or gzip header - errors. */ -local int gz_head(state) + be set to GZIP for decompression. If direct copying, then leftover input + data from the input buffer will be copied to the output buffer. In that + case, all further file reads will be directly to either the output buffer or + a user buffer. If decompressing, the inflate state will be initialized. + gz_look() will return 0 on success or -1 on failure. */ +local int gz_look(state) gz_statep state; { z_streamp strm = &(state->strm); - int flags; - unsigned len; /* allocate read buffers and inflate memory */ if (state->size == 0) { /* allocate buffers */ - state->in = malloc(state->want); - state->out = malloc(state->want << 1); + state->in = (unsigned char *)malloc(state->want); + state->out = (unsigned char *)malloc(state->want << 1); if (state->in == NULL || state->out == NULL) { if (state->out != NULL) free(state->out); @@ -129,7 +109,7 @@ local int gz_head(state) state->strm.opaque = Z_NULL; state->strm.avail_in = 0; state->strm.next_in = Z_NULL; - if (inflateInit2(&(state->strm), -15) != Z_OK) { /* raw inflate */ + if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */ free(state->out); free(state->in); state->size = 0; @@ -138,83 +118,45 @@ local int gz_head(state) } } - /* get some data in the input buffer */ - if (strm->avail_in == 0) { + /* get at least the magic bytes in the input buffer */ + if (strm->avail_in < 2) { if (gz_avail(state) == -1) return -1; if (strm->avail_in == 0) return 0; } - /* look for the gzip magic header bytes 31 and 139 */ - if (strm->next_in[0] == 31) { - strm->avail_in--; - strm->next_in++; - if (strm->avail_in == 0 && gz_avail(state) == -1) - return -1; - if (strm->avail_in && strm->next_in[0] == 139) { - /* we have a gzip header, woo hoo! */ - strm->avail_in--; - strm->next_in++; - - /* skip rest of header */ - if (NEXT() != 8) { /* compression method */ - gz_error(state, Z_DATA_ERROR, "unknown compression method"); - return -1; - } - flags = NEXT(); - if (flags & 0xe0) { /* reserved flag bits */ - gz_error(state, Z_DATA_ERROR, "unknown header flags set"); - return -1; - } - NEXT(); /* modification time */ - NEXT(); - NEXT(); - NEXT(); - NEXT(); /* extra flags */ - NEXT(); /* operating system */ - if (flags & 4) { /* extra field */ - len = (unsigned)NEXT(); - len += (unsigned)NEXT() << 8; - while (len--) - if (NEXT() < 0) - break; - } - if (flags & 8) /* file name */ - while (NEXT() > 0) - ; - if (flags & 16) /* comment */ - while (NEXT() > 0) - ; - if (flags & 2) { /* header crc */ - NEXT(); - NEXT(); - } - /* an unexpected end of file is not checked for here -- it will be - noticed on the first request for uncompressed data */ - - /* set up for decompression */ - inflateReset(strm); - strm->adler = crc32(0L, Z_NULL, 0); - state->how = GZIP; - state->direct = 0; - return 0; - } - else { - /* not a gzip file -- save first byte (31) and fall to raw i/o */ - state->out[0] = 31; - state->have = 1; - } + /* look for gzip magic bytes -- if there, do gzip decoding (note: there is + a logical dilemma here when considering the case of a partially written + gzip file, to wit, if a single 31 byte is written, then we cannot tell + whether this is a single-byte file, or just a partially written gzip + file -- for here we assume that if a gzip file is being written, then + the header will be written in a single operation, so that reading a + single byte is sufficient indication that it is not a gzip file) */ + if (strm->avail_in > 1 && + strm->next_in[0] == 31 && strm->next_in[1] == 139) { + inflateReset(strm); + state->how = GZIP; + state->direct = 0; + return 0; } - /* doing raw i/o, save start of raw data for seeking, copy any leftover - input to output -- this assumes that the output buffer is larger than - the input buffer, which also assures space for gzungetc() */ - state->raw = state->pos; - state->next = state->out; + /* no gzip header -- if we were decoding gzip before, then this is trailing + garbage. Ignore the trailing garbage and finish. */ + if (state->direct == 0) { + strm->avail_in = 0; + state->eof = 1; + state->x.have = 0; + return 0; + } + + /* doing raw i/o, copy any leftover input to output -- this assumes that + the output buffer is larger than the input buffer, which also assures + space for gzungetc() */ + state->x.next = state->out; if (strm->avail_in) { - memcpy(state->next + state->have, strm->next_in, strm->avail_in); - state->have += strm->avail_in; + memcpy(state->x.next, strm->next_in, strm->avail_in); + state->x.have = strm->avail_in; strm->avail_in = 0; } state->how = COPY; @@ -223,19 +165,15 @@ local int gz_head(state) } /* Decompress from input to the provided next_out and avail_out in the state. - If the end of the compressed data is reached, then verify the gzip trailer - check value and length (modulo 2^32). state->have and state->next are set - to point to the just decompressed data, and the crc is updated. If the - trailer is verified, state->how is reset to LOOK to look for the next gzip - stream or raw data, once state->have is depleted. Returns 0 on success, -1 - on failure. Failures may include invalid compressed data or a failed gzip - trailer verification. */ + On return, state->x.have and state->x.next point to the just decompressed + data. If the gzip stream completes, state->how is reset to LOOK to look for + the next gzip stream or raw data, once state->x.have is depleted. Returns 0 + on success, -1 on failure. */ local int gz_decomp(state) gz_statep state; { - int ret; + int ret = Z_OK; unsigned had; - unsigned long crc, len; z_streamp strm = &(state->strm); /* fill output buffer up to end of deflate stream */ @@ -245,15 +183,15 @@ local int gz_decomp(state) if (strm->avail_in == 0 && gz_avail(state) == -1) return -1; if (strm->avail_in == 0) { - gz_error(state, Z_DATA_ERROR, "unexpected end of file"); - return -1; + gz_error(state, Z_BUF_ERROR, "unexpected end of file"); + break; } /* decompress and handle errors */ ret = inflate(strm, Z_NO_FLUSH); if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { gz_error(state, Z_STREAM_ERROR, - "internal error: inflate stream corrupt"); + "internal error: inflate stream corrupt"); return -1; } if (ret == Z_MEM_ERROR) { @@ -262,67 +200,55 @@ local int gz_decomp(state) } if (ret == Z_DATA_ERROR) { /* deflate stream invalid */ gz_error(state, Z_DATA_ERROR, - strm->msg == NULL ? "compressed data error" : strm->msg); + strm->msg == NULL ? "compressed data error" : strm->msg); return -1; } } while (strm->avail_out && ret != Z_STREAM_END); - /* update available output and crc check value */ - state->have = had - strm->avail_out; - state->next = strm->next_out - state->have; - strm->adler = crc32(strm->adler, state->next, state->have); + /* update available output */ + state->x.have = had - strm->avail_out; + state->x.next = strm->next_out - state->x.have; - /* check gzip trailer if at end of deflate stream */ - if (ret == Z_STREAM_END) { - if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) { - gz_error(state, Z_DATA_ERROR, "unexpected end of file"); - return -1; - } - if (crc != strm->adler) { - gz_error(state, Z_DATA_ERROR, "incorrect data check"); - return -1; - } - if (len != (strm->total_out & 0xffffffffL)) { - gz_error(state, Z_DATA_ERROR, "incorrect length check"); - return -1; - } - state->how = LOOK; /* ready for next stream, once have is 0 (leave - state->direct unchanged to remember how) */ - } + /* if the gzip stream completed successfully, look for another */ + if (ret == Z_STREAM_END) + state->how = LOOK; /* good decompression */ return 0; } -/* Make data and put in the output buffer. Assumes that state->have == 0. +/* Fetch data and put it in the output buffer. Assumes state->x.have is 0. Data is either copied from the input file or decompressed from the input file depending on state->how. If state->how is LOOK, then a gzip header is - looked for (and skipped if found) to determine wither to copy or decompress. - Returns -1 on error, otherwise 0. gz_make() will leave state->have as COPY - or GZIP unless the end of the input file has been reached and all data has - been processed. */ -local int gz_make(state) + looked for to determine whether to copy or decompress. Returns -1 on error, + otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the + end of the input file has been reached and all data has been processed. */ +local int gz_fetch(state) gz_statep state; { z_streamp strm = &(state->strm); - if (state->how == LOOK) { /* look for gzip header */ - if (gz_head(state) == -1) - return -1; - if (state->have) /* got some data from gz_head() */ + do { + switch(state->how) { + case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */ + if (gz_look(state) == -1) + return -1; + if (state->how == LOOK) + return 0; + break; + case COPY: /* -> COPY */ + if (gz_load(state, state->out, state->size << 1, &(state->x.have)) + == -1) + return -1; + state->x.next = state->out; return 0; - } - if (state->how == COPY) { /* straight copy */ - if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1) - return -1; - state->next = state->out; - } - else if (state->how == GZIP) { /* decompress */ - strm->avail_out = state->size << 1; - strm->next_out = state->out; - if (gz_decomp(state) == -1) - return -1; - } + case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */ + strm->avail_out = state->size << 1; + strm->next_out = state->out; + if (gz_decomp(state) == -1) + return -1; + } + } while (state->x.have == 0 && (!state->eof || strm->avail_in)); return 0; } @@ -336,12 +262,12 @@ local int gz_skip(state, len) /* skip over len bytes or reach end-of-file, whichever comes first */ while (len) /* skip over whatever is in output buffer */ - if (state->have) { - n = GT_OFF(state->have) || (z_off64_t)state->have > len ? - (unsigned)len : state->have; - state->have -= n; - state->next += n; - state->pos += n; + if (state->x.have) { + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ? + (unsigned)len : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; len -= n; } @@ -352,7 +278,7 @@ local int gz_skip(state, len) /* need more data to skip -- load up output buffer */ else { /* get more output, looking for header if required */ - if (gz_make(state) == -1) + if (gz_fetch(state) == -1) return -1; } return 0; @@ -374,14 +300,15 @@ int ZEXPORT gzread(file, buf, len) state = (gz_statep)file; strm = &(state->strm); - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || state->err != Z_OK) + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) return -1; /* since an int is returned, make sure len fits in one, otherwise return with an error (this avoids the flaw in the interface) */ if ((int)len < 0) { - gz_error(state, Z_BUF_ERROR, "requested length does not fit in int"); + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); return -1; } @@ -400,49 +327,51 @@ int ZEXPORT gzread(file, buf, len) got = 0; do { /* first just try copying data from the output buffer */ - if (state->have) { - n = state->have > len ? len : state->have; - memcpy(buf, state->next, n); - state->next += n; - state->have -= n; + if (state->x.have) { + n = state->x.have > len ? len : state->x.have; + memcpy(buf, state->x.next, n); + state->x.next += n; + state->x.have -= n; } /* output buffer empty -- return if we're at the end of the input */ - else if (state->eof && strm->avail_in == 0) + else if (state->eof && strm->avail_in == 0) { + state->past = 1; /* tried to read past end */ break; + } /* need output data -- for small len or new stream load up our output buffer */ else if (state->how == LOOK || len < (state->size << 1)) { /* get more output, looking for header if required */ - if (gz_make(state) == -1) + if (gz_fetch(state) == -1) return -1; - continue; /* no progress yet -- go back to memcpy() above */ + continue; /* no progress yet -- go back to copy above */ /* the copy above assures that we will leave with space in the output buffer, allowing at least one gzungetc() to succeed */ } /* large len -- read directly into user buffer */ else if (state->how == COPY) { /* read directly */ - if (gz_load(state, buf, len, &n) == -1) + if (gz_load(state, (unsigned char *)buf, len, &n) == -1) return -1; } /* large len -- decompress directly into user buffer */ else { /* state->how == GZIP */ strm->avail_out = len; - strm->next_out = buf; + strm->next_out = (unsigned char *)buf; if (gz_decomp(state) == -1) return -1; - n = state->have; - state->have = 0; + n = state->x.have; + state->x.have = 0; } /* update progress */ len -= n; buf = (char *)buf + n; got += n; - state->pos += n; + state->x.pos += n; } while (len); /* return number of bytes read into user buffer (will fit in int) */ @@ -450,6 +379,11 @@ int ZEXPORT gzread(file, buf, len) } /* -- see zlib.h -- */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +#else +# undef gzgetc +#endif int ZEXPORT gzgetc(file) gzFile file; { @@ -462,15 +396,16 @@ int ZEXPORT gzgetc(file) return -1; state = (gz_statep)file; - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || state->err != Z_OK) + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) return -1; /* try output buffer (no need to check for skip request) */ - if (state->have) { - state->have--; - state->pos++; - return *(state->next)++; + if (state->x.have) { + state->x.have--; + state->x.pos++; + return *(state->x.next)++; } /* nothing there -- try gzread() */ @@ -478,6 +413,12 @@ int ZEXPORT gzgetc(file) return ret < 1 ? -1 : buf[0]; } +int ZEXPORT gzgetc_(file) +gzFile file; +{ + return gzgetc(file); +} + /* -- see zlib.h -- */ int ZEXPORT gzungetc(c, file) int c; @@ -490,8 +431,9 @@ int ZEXPORT gzungetc(c, file) return -1; state = (gz_statep)file; - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || state->err != Z_OK) + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) return -1; /* process a skip request */ @@ -506,32 +448,34 @@ int ZEXPORT gzungetc(c, file) return -1; /* if output buffer empty, put byte at end (allows more pushing) */ - if (state->have == 0) { - state->have = 1; - state->next = state->out + (state->size << 1) - 1; - state->next[0] = c; - state->pos--; + if (state->x.have == 0) { + state->x.have = 1; + state->x.next = state->out + (state->size << 1) - 1; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; return c; } /* if no room, give up (must have already done a gzungetc()) */ - if (state->have == (state->size << 1)) { - gz_error(state, Z_BUF_ERROR, "out of room to push characters"); + if (state->x.have == (state->size << 1)) { + gz_error(state, Z_DATA_ERROR, "out of room to push characters"); return -1; } /* slide output data if needed and insert byte before existing data */ - if (state->next == state->out) { - unsigned char *src = state->out + state->have; + if (state->x.next == state->out) { + unsigned char *src = state->out + state->x.have; unsigned char *dest = state->out + (state->size << 1); while (src > state->out) *--dest = *--src; - state->next = dest; + state->x.next = dest; } - state->have++; - state->next--; - state->next[0] = c; - state->pos--; + state->x.have++; + state->x.next--; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; return c; } @@ -551,8 +495,9 @@ char * ZEXPORT gzgets(file, buf, len) return NULL; state = (gz_statep)file; - /* check that we're reading and that there's no error */ - if (state->mode != GZ_READ || state->err != Z_OK) + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) return NULL; /* process a skip request */ @@ -569,32 +514,31 @@ char * ZEXPORT gzgets(file, buf, len) left = (unsigned)len - 1; if (left) do { /* assure that something is in the output buffer */ - if (state->have == 0) { - if (gz_make(state) == -1) - return NULL; /* error */ - if (state->have == 0) { /* end of file */ - if (buf == str) /* got bupkus */ - return NULL; - break; /* got something -- return it */ - } + if (state->x.have == 0 && gz_fetch(state) == -1) + return NULL; /* error */ + if (state->x.have == 0) { /* end of file */ + state->past = 1; /* read past end */ + break; /* return what we have */ } /* look for end-of-line in current output buffer */ - n = state->have > left ? left : state->have; - eol = memchr(state->next, '\n', n); + n = state->x.have > left ? left : state->x.have; + eol = (unsigned char *)memchr(state->x.next, '\n', n); if (eol != NULL) - n = (unsigned)(eol - state->next) + 1; + n = (unsigned)(eol - state->x.next) + 1; /* copy through end-of-line, or remainder if not found */ - memcpy(buf, state->next, n); - state->have -= n; - state->next += n; - state->pos += n; + memcpy(buf, state->x.next, n); + state->x.have -= n; + state->x.next += n; + state->x.pos += n; left -= n; buf += n; } while (left && eol == NULL); - /* found end-of-line or out of space -- terminate string and return it */ + /* return terminated string, or if nothing, end of file */ + if (buf == str) + return NULL; buf[0] = 0; return str; } @@ -610,16 +554,12 @@ int ZEXPORT gzdirect(file) return 0; state = (gz_statep)file; - /* check that we're reading */ - if (state->mode != GZ_READ) - return 0; - /* if the state is not known, but we can find out, then do so (this is mainly for right after a gzopen() or gzdopen()) */ - if (state->how == LOOK && state->have == 0) - (void)gz_head(state); + if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) + (void)gz_look(state); - /* return 1 if reading direct, 0 if decompressing a gzip stream */ + /* return 1 if transparent, 0 if processing a gzip stream */ return state->direct; } @@ -627,7 +567,7 @@ int ZEXPORT gzdirect(file) int ZEXPORT gzclose_r(file) gzFile file; { - int ret; + int ret, err; gz_statep state; /* get internal structure */ @@ -645,9 +585,10 @@ int ZEXPORT gzclose_r(file) free(state->out); free(state->in); } + err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK; gz_error(state, Z_OK, NULL); free(state->path); ret = close(state->fd); free(state); - return ret ? Z_ERRNO : Z_OK; + return ret ? Z_ERRNO : err; } diff --git a/thirdparty/libz/gzwrite.c b/thirdparty/libz/gzwrite.c index e8defc68..aa767fbf 100644 --- a/thirdparty/libz/gzwrite.c +++ b/thirdparty/libz/gzwrite.c @@ -1,5 +1,5 @@ /* gzwrite.c -- zlib functions for writing gzip files - * Copyright (C) 2004, 2005, 2010 Mark Adler + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -18,44 +18,55 @@ local int gz_init(state) int ret; z_streamp strm = &(state->strm); - /* allocate input and output buffers */ - state->in = malloc(state->want); - state->out = malloc(state->want); - if (state->in == NULL || state->out == NULL) { - if (state->out != NULL) - free(state->out); - if (state->in != NULL) - free(state->in); + /* allocate input buffer */ + state->in = (unsigned char *)malloc(state->want); + if (state->in == NULL) { gz_error(state, Z_MEM_ERROR, "out of memory"); return -1; } - /* allocate deflate memory, set up for gzip compression */ - strm->zalloc = Z_NULL; - strm->zfree = Z_NULL; - strm->opaque = Z_NULL; - ret = deflateInit2(strm, state->level, Z_DEFLATED, - 15 + 16, 8, state->strategy); - if (ret != Z_OK) { - free(state->in); - gz_error(state, Z_MEM_ERROR, "out of memory"); - return -1; + /* only need output buffer and deflate state if compressing */ + if (!state->direct) { + /* allocate output buffer */ + state->out = (unsigned char *)malloc(state->want); + if (state->out == NULL) { + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* allocate deflate memory, set up for gzip compression */ + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = deflateInit2(strm, state->level, Z_DEFLATED, + MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); + if (ret != Z_OK) { + free(state->out); + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } } /* mark state as initialized */ state->size = state->want; - /* initialize write buffer */ - strm->avail_out = state->size; - strm->next_out = state->out; - state->next = strm->next_out; + /* initialize write buffer if compressing */ + if (!state->direct) { + strm->avail_out = state->size; + strm->next_out = state->out; + state->x.next = strm->next_out; + } return 0; } /* Compress whatever is at avail_in and next_in and write to the output file. Return -1 if there is an error writing to the output file, otherwise 0. flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH, - then the deflate() state is reset to start a new gzip stream. */ + then the deflate() state is reset to start a new gzip stream. If gz->direct + is true, then simply write to the output file without compressing, and + ignore flush. */ local int gz_comp(state, flush) gz_statep state; int flush; @@ -68,6 +79,17 @@ local int gz_comp(state, flush) if (state->size == 0 && gz_init(state) == -1) return -1; + /* write directly if requested */ + if (state->direct) { + got = write(state->fd, strm->next_in, strm->avail_in); + if (got < 0 || (unsigned)got != strm->avail_in) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + strm->avail_in = 0; + return 0; + } + /* run deflate() on provided input until it produces no more output */ ret = Z_OK; do { @@ -75,8 +97,8 @@ local int gz_comp(state, flush) doing Z_FINISH then don't write until we get to Z_STREAM_END */ if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && (flush != Z_FINISH || ret == Z_STREAM_END))) { - have = (unsigned)(strm->next_out - state->next); - if (have && ((got = write(state->fd, state->next, have)) < 0 || + have = (unsigned)(strm->next_out - state->x.next); + if (have && ((got = write(state->fd, state->x.next, have)) < 0 || (unsigned)got != have)) { gz_error(state, Z_ERRNO, zstrerror()); return -1; @@ -85,7 +107,7 @@ local int gz_comp(state, flush) strm->avail_out = state->size; strm->next_out = state->out; } - state->next = strm->next_out; + state->x.next = strm->next_out; } /* compress */ @@ -131,7 +153,7 @@ local int gz_zero(state, len) } strm->avail_in = n; strm->next_in = state->in; - state->pos += n; + state->x.pos += n; if (gz_comp(state, Z_NO_FLUSH) == -1) return -1; len -= n; @@ -146,7 +168,6 @@ int ZEXPORT gzwrite(file, buf, len) unsigned len; { unsigned put = len; - unsigned n; gz_statep state; z_streamp strm; @@ -163,7 +184,7 @@ int ZEXPORT gzwrite(file, buf, len) /* since an int is returned, make sure len fits in one, otherwise return with an error (this avoids the flaw in the interface) */ if ((int)len < 0) { - gz_error(state, Z_BUF_ERROR, "requested length does not fit in int"); + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); return 0; } @@ -186,16 +207,19 @@ int ZEXPORT gzwrite(file, buf, len) if (len < state->size) { /* copy to input buffer, compress when full */ do { + unsigned have, copy; + if (strm->avail_in == 0) strm->next_in = state->in; - n = state->size - strm->avail_in; - if (n > len) - n = len; - memcpy(strm->next_in + strm->avail_in, buf, n); - strm->avail_in += n; - state->pos += n; - buf = (char *)buf + n; - len -= n; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + copy = state->size - have; + if (copy > len) + copy = len; + memcpy(state->in + have, buf, copy); + strm->avail_in += copy; + state->x.pos += copy; + buf = (const char *)buf + copy; + len -= copy; if (len && gz_comp(state, Z_NO_FLUSH) == -1) return 0; } while (len); @@ -207,8 +231,8 @@ int ZEXPORT gzwrite(file, buf, len) /* directly compress user buffer to file */ strm->avail_in = len; - strm->next_in = (voidp)buf; - state->pos += len; + strm->next_in = (z_const Bytef *)buf; + state->x.pos += len; if (gz_comp(state, Z_NO_FLUSH) == -1) return 0; } @@ -222,6 +246,7 @@ int ZEXPORT gzputc(file, c) gzFile file; int c; { + unsigned have; unsigned char buf[1]; gz_statep state; z_streamp strm; @@ -245,19 +270,23 @@ int ZEXPORT gzputc(file, c) /* try writing to input buffer for speed (state->size == 0 if buffer not initialized) */ - if (strm->avail_in < state->size) { + if (state->size) { if (strm->avail_in == 0) strm->next_in = state->in; - strm->next_in[strm->avail_in++] = c; - state->pos++; - return c; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + if (have < state->size) { + state->in[have] = c; + strm->avail_in++; + state->x.pos++; + return c & 0xff; + } } /* no room in buffer or not initialized, use gz_write() */ buf[0] = c; if (gzwrite(file, buf, 1) != 1) return -1; - return c; + return c & 0xff; } /* -- see zlib.h -- */ @@ -274,16 +303,15 @@ int ZEXPORT gzputs(file, str) return ret == 0 && len != 0 ? -1 : ret; } -#ifdef STDC +#if defined(STDC) || defined(Z_HAVE_STDARG_H) #include /* -- see zlib.h -- */ -int ZEXPORTVA gzprintf (gzFile file, const char *format, ...) +int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) { int size, len; gz_statep state; z_streamp strm; - va_list va; /* get internal structure */ if (file == NULL) @@ -313,25 +341,20 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...) /* do the printf() into the input buffer, put length in len */ size = (int)(state->size); state->in[size - 1] = 0; - va_start(va, format); #ifdef NO_vsnprintf # ifdef HAS_vsprintf_void - (void)vsprintf(state->in, format, va); - va_end(va); + (void)vsprintf((char *)(state->in), format, va); for (len = 0; len < size; len++) if (state->in[len] == 0) break; # else - len = vsprintf(state->in, format, va); - va_end(va); + len = vsprintf((char *)(state->in), format, va); # endif #else # ifdef HAS_vsnprintf_void - (void)vsnprintf(state->in, size, format, va); - va_end(va); - len = strlen(state->in); + (void)vsnprintf((char *)(state->in), size, format, va); + len = strlen((char *)(state->in)); # else len = vsnprintf((char *)(state->in), size, format, va); - va_end(va); # endif #endif @@ -342,11 +365,22 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...) /* update buffer and position, defer compression until needed */ strm->avail_in = (unsigned)len; strm->next_in = state->in; - state->pos += len; + state->x.pos += len; return len; } -#else /* !STDC */ +int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) +{ + va_list va; + int ret; + + va_start(va, format); + ret = gzvprintf(file, format, va); + va_end(va); + return ret; +} + +#else /* !STDC && !Z_HAVE_STDARG_H */ /* -- see zlib.h -- */ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, @@ -366,6 +400,10 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, state = (gz_statep)file; strm = &(state->strm); + /* check that can really pass pointer in ints */ + if (sizeof(int) != sizeof(void *)) + return 0; + /* check that we're writing and that there's no error */ if (state->mode != GZ_WRITE || state->err != Z_OK) return 0; @@ -390,22 +428,23 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, state->in[size - 1] = 0; #ifdef NO_snprintf # ifdef HAS_sprintf_void - sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8, + sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); for (len = 0; len < size; len++) if (state->in[len] == 0) break; # else - len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); # endif #else # ifdef HAS_snprintf_void - snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8, + snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - len = strlen(state->in); + len = strlen((char *)(state->in)); # else - len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, + a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, + a19, a20); # endif #endif @@ -416,7 +455,7 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, /* update buffer and position, defer compression until needed */ strm->avail_in = (unsigned)len; strm->next_in = state->in; - state->pos += len; + state->x.pos += len; return len; } @@ -500,7 +539,7 @@ int ZEXPORT gzsetparams(file, level, strategy) int ZEXPORT gzclose_w(file) gzFile file; { - int ret = 0; + int ret = Z_OK; gz_statep state; /* get internal structure */ @@ -515,17 +554,24 @@ int ZEXPORT gzclose_w(file) /* check for seek request */ if (state->seek) { state->seek = 0; - ret += gz_zero(state, state->skip); + if (gz_zero(state, state->skip) == -1) + ret = state->err; } /* flush, free memory, and close file */ - ret += gz_comp(state, Z_FINISH); - (void)deflateEnd(&(state->strm)); - free(state->out); - free(state->in); + if (gz_comp(state, Z_FINISH) == -1) + ret = state->err; + if (state->size) { + if (!state->direct) { + (void)deflateEnd(&(state->strm)); + free(state->out); + } + free(state->in); + } gz_error(state, Z_OK, NULL); free(state->path); - ret += close(state->fd); + if (close(state->fd) == -1) + ret = Z_ERRNO; free(state); - return ret ? Z_ERRNO : Z_OK; + return ret; } diff --git a/thirdparty/libz/infback.c b/thirdparty/libz/infback.c index af3a8c96..f3833c2e 100644 --- a/thirdparty/libz/infback.c +++ b/thirdparty/libz/infback.c @@ -1,5 +1,5 @@ /* infback.c -- inflate using a call-back interface - * Copyright (C) 1995-2009 Mark Adler + * Copyright (C) 1995-2011 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -42,10 +42,19 @@ int stream_size; return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; +#endif } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif state = (struct inflate_state FAR *)ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; @@ -246,7 +255,7 @@ out_func out; void FAR *out_desc; { struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ + z_const unsigned char FAR *next; /* next input */ unsigned char FAR *put; /* next output */ unsigned have, left; /* available input and output */ unsigned long hold; /* bit buffer */ @@ -394,7 +403,6 @@ void FAR *out_desc; PULLBYTE(); } if (here.val < 16) { - NEEDBITS(here.bits); DROPBITS(here.bits); state->lens[state->have++] = here.val; } diff --git a/thirdparty/libz/inffast.c b/thirdparty/libz/inffast.c index 2f1d60b4..bda59ceb 100644 --- a/thirdparty/libz/inffast.c +++ b/thirdparty/libz/inffast.c @@ -1,5 +1,5 @@ /* inffast.c -- fast decoding - * Copyright (C) 1995-2008, 2010 Mark Adler + * Copyright (C) 1995-2008, 2010, 2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -69,8 +69,8 @@ z_streamp strm; unsigned start; /* inflate()'s starting value for strm->avail_out */ { struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ + z_const unsigned char FAR *in; /* local strm->next_in */ + z_const unsigned char FAR *last; /* have enough input while in < last */ unsigned char FAR *out; /* local strm->next_out */ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ unsigned char FAR *end; /* while out < end, enough space available */ diff --git a/thirdparty/libz/inffixed.h b/thirdparty/libz/inffixed.h index 75ed4b59..d6283277 100644 --- a/thirdparty/libz/inffixed.h +++ b/thirdparty/libz/inffixed.h @@ -2,9 +2,9 @@ * Generated automatically by makefixed(). */ - /* WARNING: this file should *not* be used by applications. It - is part of the implementation of the compression library and - is subject to change. Applications should only use zlib.h. + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. */ static const code lenfix[512] = { diff --git a/thirdparty/libz/inflate.c b/thirdparty/libz/inflate.c index a8431abe..870f89bb 100644 --- a/thirdparty/libz/inflate.c +++ b/thirdparty/libz/inflate.c @@ -1,5 +1,5 @@ /* inflate.c -- zlib decompression - * Copyright (C) 1995-2010 Mark Adler + * Copyright (C) 1995-2012 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -93,14 +93,15 @@ /* function prototypes */ local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); +local int updatewindow OF((z_streamp strm, const unsigned char FAR *end, + unsigned copy)); #ifdef BUILDFIXED void makefixed OF((void)); #endif -local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, +local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf, unsigned len)); -int ZEXPORT inflateReset(strm) +int ZEXPORT inflateResetKeep(strm) z_streamp strm; { struct inflate_state FAR *state; @@ -109,15 +110,13 @@ z_streamp strm; state = (struct inflate_state FAR *)strm->state; strm->total_in = strm->total_out = state->total = 0; strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ + if (state->wrap) /* to support ill-conceived Java test suite */ + strm->adler = state->wrap & 1; state->mode = HEAD; state->last = 0; state->havedict = 0; state->dmax = 32768U; state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->wnext = 0; state->hold = 0; state->bits = 0; state->lencode = state->distcode = state->next = state->codes; @@ -127,6 +126,19 @@ z_streamp strm; return Z_OK; } +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + state->wsize = 0; + state->whave = 0; + state->wnext = 0; + return inflateResetKeep(strm); +} + int ZEXPORT inflateReset2(strm, windowBits) z_streamp strm; int windowBits; @@ -180,10 +192,19 @@ int stream_size; if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else strm->zalloc = zcalloc; strm->opaque = (voidpf)0; +#endif } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif state = (struct inflate_state FAR *) ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; @@ -321,8 +342,8 @@ void makefixed() low = 0; for (;;) { if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits, - state.lencode[low].val); + printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, + state.lencode[low].bits, state.lencode[low].val); if (++low == size) break; putchar(','); } @@ -355,12 +376,13 @@ void makefixed() output will fall in the output data, making match copies simpler and faster. The advantage may be dependent on the size of the processor's data caches. */ -local int updatewindow(strm, out) +local int updatewindow(strm, end, copy) z_streamp strm; -unsigned out; +const Bytef *end; +unsigned copy; { struct inflate_state FAR *state; - unsigned copy, dist; + unsigned dist; state = (struct inflate_state FAR *)strm->state; @@ -380,19 +402,18 @@ unsigned out; } /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); + zmemcpy(state->window, end - state->wsize, state->wsize); state->wnext = 0; state->whave = state->wsize; } else { dist = state->wsize - state->wnext; if (dist > copy) dist = copy; - zmemcpy(state->window + state->wnext, strm->next_out - copy, dist); + zmemcpy(state->window + state->wnext, end - copy, dist); copy -= dist; if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); + zmemcpy(state->window, end - copy, copy); state->wnext = copy; state->whave = state->wsize; } @@ -499,11 +520,6 @@ unsigned out; bits -= bits & 7; \ } while (0) -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - /* inflate() uses a state machine to process as much input data and generate as much output data as possible before returning. The state machine is @@ -591,7 +607,7 @@ z_streamp strm; int flush; { struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ + z_const unsigned char FAR *next; /* next input */ unsigned char FAR *put; /* next output */ unsigned have, left; /* available input and output */ unsigned long hold; /* bit buffer */ @@ -797,7 +813,7 @@ int flush; #endif case DICTID: NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); + strm->adler = state->check = ZSWAP32(hold); INITBITS(); state->mode = DICT; case DICT: @@ -905,7 +921,7 @@ int flush; while (state->have < 19) state->lens[order[state->have++]] = 0; state->next = state->codes; - state->lencode = (code const FAR *)(state->next); + state->lencode = (const code FAR *)(state->next); state->lenbits = 7; ret = inflate_table(CODES, state->lens, 19, &(state->next), &(state->lenbits), state->work); @@ -925,7 +941,6 @@ int flush; PULLBYTE(); } if (here.val < 16) { - NEEDBITS(here.bits); DROPBITS(here.bits); state->lens[state->have++] = here.val; } @@ -980,7 +995,7 @@ int flush; values here (9 and 6) without reading the comments in inftrees.h concerning the ENOUGH constants, which depend on those values */ state->next = state->codes; - state->lencode = (code const FAR *)(state->next); + state->lencode = (const code FAR *)(state->next); state->lenbits = 9; ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), &(state->lenbits), state->work); @@ -989,7 +1004,7 @@ int flush; state->mode = BAD; break; } - state->distcode = (code const FAR *)(state->next); + state->distcode = (const code FAR *)(state->next); state->distbits = 6; ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, &(state->next), &(state->distbits), state->work); @@ -1170,7 +1185,7 @@ int flush; #ifdef GUNZIP state->flags ? hold : #endif - REVERSE(hold)) != state->check) { + ZSWAP32(hold)) != state->check) { strm->msg = (char *)"incorrect data check"; state->mode = BAD; break; @@ -1214,8 +1229,9 @@ int flush; */ inf_leave: RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { + if (state->wsize || (out != strm->avail_out && state->mode < BAD && + (state->mode < CHECK || flush != Z_FINISH))) + if (updatewindow(strm, strm->next_out, out - strm->avail_out)) { state->mode = MEM; return Z_MEM_ERROR; } @@ -1249,13 +1265,37 @@ z_streamp strm; return Z_OK; } +int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength) +z_streamp strm; +Bytef *dictionary; +uInt *dictLength; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* copy dictionary */ + if (state->whave && dictionary != Z_NULL) { + zmemcpy(dictionary, state->window + state->wnext, + state->whave - state->wnext); + zmemcpy(dictionary + state->whave - state->wnext, + state->window, state->wnext); + } + if (dictLength != Z_NULL) + *dictLength = state->whave; + return Z_OK; +} + int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) z_streamp strm; const Bytef *dictionary; uInt dictLength; { struct inflate_state FAR *state; - unsigned long id; + unsigned long dictid; + int ret; /* check state */ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; @@ -1263,29 +1303,21 @@ uInt dictLength; if (state->wrap != 0 && state->mode != DICT) return Z_STREAM_ERROR; - /* check for correct dictionary id */ + /* check for correct dictionary identifier */ if (state->mode == DICT) { - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) + dictid = adler32(0L, Z_NULL, 0); + dictid = adler32(dictid, dictionary, dictLength); + if (dictid != state->check) return Z_DATA_ERROR; } - /* copy dictionary to window */ - if (updatewindow(strm, strm->avail_out)) { + /* copy dictionary to window using updatewindow(), which will amend the + existing dictionary if appropriate */ + ret = updatewindow(strm, dictionary + dictLength, dictLength); + if (ret) { state->mode = MEM; return Z_MEM_ERROR; } - if (dictLength > state->wsize) { - zmemcpy(state->window, dictionary + dictLength - state->wsize, - state->wsize); - state->whave = state->wsize; - } - else { - zmemcpy(state->window + state->wsize - dictLength, dictionary, - dictLength); - state->whave = dictLength; - } state->havedict = 1; Tracev((stderr, "inflate: dictionary set\n")); return Z_OK; @@ -1321,7 +1353,7 @@ gz_headerp head; */ local unsigned syncsearch(have, buf, len) unsigned FAR *have; -unsigned char FAR *buf; +const unsigned char FAR *buf; unsigned len; { unsigned got; @@ -1433,8 +1465,8 @@ z_streamp source; } /* copy state */ - zmemcpy(dest, source, sizeof(z_stream)); - zmemcpy(copy, state, sizeof(struct inflate_state)); + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state)); if (state->lencode >= state->codes && state->lencode <= state->codes + ENOUGH - 1) { copy->lencode = copy->codes + (state->lencode - state->codes); diff --git a/thirdparty/libz/inftrees.c b/thirdparty/libz/inftrees.c index 11e9c52a..44d89cf2 100644 --- a/thirdparty/libz/inftrees.c +++ b/thirdparty/libz/inftrees.c @@ -1,5 +1,5 @@ /* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2010 Mark Adler + * Copyright (C) 1995-2013 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -9,7 +9,7 @@ #define MAXBITS 15 const char inflate_copyright[] = - " inflate 1.2.5 Copyright 1995-2010 Mark Adler "; + " inflate 1.2.8 Copyright 1995-2013 Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -62,7 +62,7 @@ unsigned short FAR *work; 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; static const unsigned short lext[31] = { /* Length codes 257..285 extra */ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195}; + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78}; static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, @@ -208,8 +208,8 @@ unsigned short FAR *work; mask = used - 1; /* mask for comparing low */ /* check available table space */ - if ((type == LENS && used >= ENOUGH_LENS) || - (type == DISTS && used >= ENOUGH_DISTS)) + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) return 1; /* process all codes and make table entries */ @@ -277,8 +277,8 @@ unsigned short FAR *work; /* check for enough space */ used += 1U << curr; - if ((type == LENS && used >= ENOUGH_LENS) || - (type == DISTS && used >= ENOUGH_DISTS)) + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) return 1; /* point entry in root table to sub-table */ @@ -289,38 +289,14 @@ unsigned short FAR *work; } } - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - here.op = (unsigned char)64; /* invalid code marker */ - here.bits = (unsigned char)(len - drop); - here.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - here.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = here; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; + /* fill in remaining table entry if code is incomplete (guaranteed to have + at most one remaining entry, since if the code is incomplete, the + maximum code length that was allowed to get this far is one bit) */ + if (huff != 0) { + here.op = (unsigned char)64; /* invalid code marker */ + here.bits = (unsigned char)(len - drop); + here.val = (unsigned short)0; + next[huff] = here; } /* set return parameters */ diff --git a/thirdparty/libz/minigzip.c b/thirdparty/libz/minigzip.c deleted file mode 100644 index 9825ccc3..00000000 --- a/thirdparty/libz/minigzip.c +++ /dev/null @@ -1,440 +0,0 @@ -/* minigzip.c -- simulate gzip using the zlib compression library - * Copyright (C) 1995-2006, 2010 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * minigzip is a minimal implementation of the gzip utility. This is - * only an example of using zlib and isn't meant to replace the - * full-featured gzip. No attempt is made to deal with file systems - * limiting names to 14 or 8+3 characters, etc... Error checking is - * very limited. So use minigzip only for testing; use gzip for the - * real thing. On MSDOS, use only on file names without extension - * or in pipe mode. - */ - -/* @(#) $Id$ */ - -#include "zlib.h" -#include - -#ifdef STDC -# include -# include -#endif - -#ifdef USE_MMAP -# include -# include -# include -#endif - -#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) -# include -# include -# ifdef UNDER_CE -# include -# endif -# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) -#else -# define SET_BINARY_MODE(file) -#endif - -#ifdef VMS -# define unlink delete -# define GZ_SUFFIX "-gz" -#endif -#ifdef RISCOS -# define unlink remove -# define GZ_SUFFIX "-gz" -# define fileno(file) file->__file -#endif -#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include /* for fileno */ -#endif - -#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE) -#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ - extern int unlink OF((const char *)); -#endif -#endif - -#if defined(UNDER_CE) -# include -# define perror(s) pwinerror(s) - -/* Map the Windows error number in ERROR to a locale-dependent error - message string and return a pointer to it. Typically, the values - for ERROR come from GetLastError. - - The string pointed to shall not be modified by the application, - but may be overwritten by a subsequent call to strwinerror - - The strwinerror function does not change the current setting - of GetLastError. */ - -static char *strwinerror (error) - DWORD error; -{ - static char buf[1024]; - - wchar_t *msgbuf; - DWORD lasterr = GetLastError(); - DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM - | FORMAT_MESSAGE_ALLOCATE_BUFFER, - NULL, - error, - 0, /* Default language */ - (LPVOID)&msgbuf, - 0, - NULL); - if (chars != 0) { - /* If there is an \r\n appended, zap it. */ - if (chars >= 2 - && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { - chars -= 2; - msgbuf[chars] = 0; - } - - if (chars > sizeof (buf) - 1) { - chars = sizeof (buf) - 1; - msgbuf[chars] = 0; - } - - wcstombs(buf, msgbuf, chars + 1); - LocalFree(msgbuf); - } - else { - sprintf(buf, "unknown win32 error (%ld)", error); - } - - SetLastError(lasterr); - return buf; -} - -static void pwinerror (s) - const char *s; -{ - if (s && *s) - fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ())); - else - fprintf(stderr, "%s\n", strwinerror(GetLastError ())); -} - -#endif /* UNDER_CE */ - -#ifndef GZ_SUFFIX -# define GZ_SUFFIX ".gz" -#endif -#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) - -#define BUFLEN 16384 -#define MAX_NAME_LEN 1024 - -#ifdef MAXSEG_64K -# define local static - /* Needed for systems with limitation on stack size. */ -#else -# define local -#endif - -char *prog; - -void error OF((const char *msg)); -void gz_compress OF((FILE *in, gzFile out)); -#ifdef USE_MMAP -int gz_compress_mmap OF((FILE *in, gzFile out)); -#endif -void gz_uncompress OF((gzFile in, FILE *out)); -void file_compress OF((char *file, char *mode)); -void file_uncompress OF((char *file)); -int main OF((int argc, char *argv[])); - -/* =========================================================================== - * Display error message and exit - */ -void error(msg) - const char *msg; -{ - fprintf(stderr, "%s: %s\n", prog, msg); - exit(1); -} - -/* =========================================================================== - * Compress input to output then close both files. - */ - -void gz_compress(in, out) - FILE *in; - gzFile out; -{ - local char buf[BUFLEN]; - int len; - int err; - -#ifdef USE_MMAP - /* Try first compressing with mmap. If mmap fails (minigzip used in a - * pipe), use the normal fread loop. - */ - if (gz_compress_mmap(in, out) == Z_OK) return; -#endif - for (;;) { - len = (int)fread(buf, 1, sizeof(buf), in); - if (ferror(in)) { - perror("fread"); - exit(1); - } - if (len == 0) break; - - if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); - } - fclose(in); - if (gzclose(out) != Z_OK) error("failed gzclose"); -} - -#ifdef USE_MMAP /* MMAP version, Miguel Albrecht */ - -/* Try compressing the input file at once using mmap. Return Z_OK if - * if success, Z_ERRNO otherwise. - */ -int gz_compress_mmap(in, out) - FILE *in; - gzFile out; -{ - int len; - int err; - int ifd = fileno(in); - caddr_t buf; /* mmap'ed buffer for the entire input file */ - off_t buf_len; /* length of the input file */ - struct stat sb; - - /* Determine the size of the file, needed for mmap: */ - if (fstat(ifd, &sb) < 0) return Z_ERRNO; - buf_len = sb.st_size; - if (buf_len <= 0) return Z_ERRNO; - - /* Now do the actual mmap: */ - buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); - if (buf == (caddr_t)(-1)) return Z_ERRNO; - - /* Compress the whole file at once: */ - len = gzwrite(out, (char *)buf, (unsigned)buf_len); - - if (len != (int)buf_len) error(gzerror(out, &err)); - - munmap(buf, buf_len); - fclose(in); - if (gzclose(out) != Z_OK) error("failed gzclose"); - return Z_OK; -} -#endif /* USE_MMAP */ - -/* =========================================================================== - * Uncompress input to output then close both files. - */ -void gz_uncompress(in, out) - gzFile in; - FILE *out; -{ - local char buf[BUFLEN]; - int len; - int err; - - for (;;) { - len = gzread(in, buf, sizeof(buf)); - if (len < 0) error (gzerror(in, &err)); - if (len == 0) break; - - if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { - error("failed fwrite"); - } - } - if (fclose(out)) error("failed fclose"); - - if (gzclose(in) != Z_OK) error("failed gzclose"); -} - - -/* =========================================================================== - * Compress the given file: create a corresponding .gz file and remove the - * original. - */ -void file_compress(file, mode) - char *file; - char *mode; -{ - local char outfile[MAX_NAME_LEN]; - FILE *in; - gzFile out; - - if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) { - fprintf(stderr, "%s: filename too long\n", prog); - exit(1); - } - - strcpy(outfile, file); - strcat(outfile, GZ_SUFFIX); - - in = fopen(file, "rb"); - if (in == NULL) { - perror(file); - exit(1); - } - out = gzopen(outfile, mode); - if (out == NULL) { - fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); - exit(1); - } - gz_compress(in, out); - - unlink(file); -} - - -/* =========================================================================== - * Uncompress the given file and remove the original. - */ -void file_uncompress(file) - char *file; -{ - local char buf[MAX_NAME_LEN]; - char *infile, *outfile; - FILE *out; - gzFile in; - size_t len = strlen(file); - - if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) { - fprintf(stderr, "%s: filename too long\n", prog); - exit(1); - } - - strcpy(buf, file); - - if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { - infile = file; - outfile = buf; - outfile[len-3] = '\0'; - } else { - outfile = file; - infile = buf; - strcat(infile, GZ_SUFFIX); - } - in = gzopen(infile, "rb"); - if (in == NULL) { - fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); - exit(1); - } - out = fopen(outfile, "wb"); - if (out == NULL) { - perror(file); - exit(1); - } - - gz_uncompress(in, out); - - unlink(infile); -} - - -/* =========================================================================== - * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...] - * -c : write to standard output - * -d : decompress - * -f : compress with Z_FILTERED - * -h : compress with Z_HUFFMAN_ONLY - * -r : compress with Z_RLE - * -1 to -9 : compression level - */ - -int main(argc, argv) - int argc; - char *argv[]; -{ - int copyout = 0; - int uncompr = 0; - gzFile file; - char *bname, outmode[20]; - - strcpy(outmode, "wb6 "); - - prog = argv[0]; - bname = strrchr(argv[0], '/'); - if (bname) - bname++; - else - bname = argv[0]; - argc--, argv++; - - if (!strcmp(bname, "gunzip")) - uncompr = 1; - else if (!strcmp(bname, "zcat")) - copyout = uncompr = 1; - - while (argc > 0) { - if (strcmp(*argv, "-c") == 0) - copyout = 1; - else if (strcmp(*argv, "-d") == 0) - uncompr = 1; - else if (strcmp(*argv, "-f") == 0) - outmode[3] = 'f'; - else if (strcmp(*argv, "-h") == 0) - outmode[3] = 'h'; - else if (strcmp(*argv, "-r") == 0) - outmode[3] = 'R'; - else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && - (*argv)[2] == 0) - outmode[2] = (*argv)[1]; - else - break; - argc--, argv++; - } - if (outmode[3] == ' ') - outmode[3] = 0; - if (argc == 0) { - SET_BINARY_MODE(stdin); - SET_BINARY_MODE(stdout); - if (uncompr) { - file = gzdopen(fileno(stdin), "rb"); - if (file == NULL) error("can't gzdopen stdin"); - gz_uncompress(file, stdout); - } else { - file = gzdopen(fileno(stdout), outmode); - if (file == NULL) error("can't gzdopen stdout"); - gz_compress(stdin, file); - } - } else { - if (copyout) { - SET_BINARY_MODE(stdout); - } - do { - if (uncompr) { - if (copyout) { - file = gzopen(*argv, "rb"); - if (file == NULL) - fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv); - else - gz_uncompress(file, stdout); - } else { - file_uncompress(*argv); - } - } else { - if (copyout) { - FILE * in = fopen(*argv, "rb"); - - if (in == NULL) { - perror(*argv); - } else { - file = gzdopen(fileno(stdout), outmode); - if (file == NULL) error("can't gzdopen stdout"); - - gz_compress(in, file); - } - - } else { - file_compress(*argv, outmode); - } - } - } while (argv++, --argc); - } - return 0; -} diff --git a/thirdparty/libz/trees.c b/thirdparty/libz/trees.c index 56e9bb1c..1fd7759e 100644 --- a/thirdparty/libz/trees.c +++ b/thirdparty/libz/trees.c @@ -1,5 +1,5 @@ /* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2010 Jean-loup Gailly + * Copyright (C) 1995-2012 Jean-loup Gailly * detect_data_type() function provided freely by Cosmin Truta, 2006 * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -74,11 +74,6 @@ local const uch bl_order[BL_CODES] * probability, to avoid transmitting the lengths for unused bit length codes. */ -#define Buf_size (8 * 2*sizeof(char)) -/* Number of bits used within bi_buf. (bi_buf might be implemented on - * more than 16 bits on some systems.) - */ - /* =========================================================================== * Local data. These are initialized only once. */ @@ -151,8 +146,8 @@ local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); local int build_bl_tree OF((deflate_state *s)); local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); +local void compress_block OF((deflate_state *s, const ct_data *ltree, + const ct_data *dtree)); local int detect_data_type OF((deflate_state *s)); local unsigned bi_reverse OF((unsigned value, int length)); local void bi_windup OF((deflate_state *s)); @@ -399,7 +394,6 @@ void ZLIB_INTERNAL _tr_init(s) s->bi_buf = 0; s->bi_valid = 0; - s->last_eob_len = 8; /* enough lookahead for inflate */ #ifdef DEBUG s->compressed_len = 0L; s->bits_sent = 0L; @@ -882,16 +876,18 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last) copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ } +/* =========================================================================== + * Flush the bits in the bit buffer to pending output (leaves at most 7 bits) + */ +void ZLIB_INTERNAL _tr_flush_bits(s) + deflate_state *s; +{ + bi_flush(s); +} + /* =========================================================================== * Send one empty static block to give enough lookahead for inflate. * This takes 10 bits, of which 7 may remain in the bit buffer. - * The current inflate code requires 9 bits of lookahead. If the - * last two codes for the previous block (real code plus EOB) were coded - * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode - * the last real code. In this case we send two empty static blocks instead - * of one. (There are no problems if the previous block is stored or fixed.) - * To simplify the code, we assume the worst case of last real code encoded - * on one bit only. */ void ZLIB_INTERNAL _tr_align(s) deflate_state *s; @@ -902,20 +898,6 @@ void ZLIB_INTERNAL _tr_align(s) s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ #endif bi_flush(s); - /* Of the 10 bits for the empty block, we have already sent - * (10 - bi_valid) bits. The lookahead for the last real code (before - * the EOB of the previous block) was thus at least one plus the length - * of the EOB plus what we have just sent of the empty static block. - */ - if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; -#endif - bi_flush(s); - } - s->last_eob_len = 7; } /* =========================================================================== @@ -990,7 +972,8 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last) } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { #endif send_bits(s, (STATIC_TREES<<1)+last, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); + compress_block(s, (const ct_data *)static_ltree, + (const ct_data *)static_dtree); #ifdef DEBUG s->compressed_len += 3 + s->static_len; #endif @@ -998,7 +981,8 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last) send_bits(s, (DYN_TREES<<1)+last, 3); send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); + compress_block(s, (const ct_data *)s->dyn_ltree, + (const ct_data *)s->dyn_dtree); #ifdef DEBUG s->compressed_len += 3 + s->opt_len; #endif @@ -1075,8 +1059,8 @@ int ZLIB_INTERNAL _tr_tally (s, dist, lc) */ local void compress_block(s, ltree, dtree) deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ + const ct_data *ltree; /* literal tree */ + const ct_data *dtree; /* distance tree */ { unsigned dist; /* distance of matched string */ int lc; /* match length or unmatched char (if dist == 0) */ @@ -1118,7 +1102,6 @@ local void compress_block(s, ltree, dtree) } while (lx < s->last_lit); send_code(s, END_BLOCK, ltree); - s->last_eob_len = ltree[END_BLOCK].Len; } /* =========================================================================== @@ -1226,7 +1209,6 @@ local void copy_block(s, buf, len, header) int header; /* true if block header must be written */ { bi_windup(s); /* align on byte boundary */ - s->last_eob_len = 8; /* enough lookahead for inflate */ if (header) { put_short(s, (ush)len); diff --git a/thirdparty/libz/uncompr.c b/thirdparty/libz/uncompr.c index ad98be3a..242e9493 100644 --- a/thirdparty/libz/uncompr.c +++ b/thirdparty/libz/uncompr.c @@ -30,7 +30,7 @@ int ZEXPORT uncompress (dest, destLen, source, sourceLen) z_stream stream; int err; - stream.next_in = (Bytef*)source; + stream.next_in = (z_const Bytef *)source; stream.avail_in = (uInt)sourceLen; /* Check for source > 64K on 16-bit machine: */ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; diff --git a/thirdparty/libz/zlib.h b/thirdparty/libz/zlib.h index bfbba83e..3e0c7672 100644 --- a/thirdparty/libz/zlib.h +++ b/thirdparty/libz/zlib.h @@ -1,7 +1,7 @@ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.5, April 19th, 2010 + version 1.2.8, April 28th, 2013 - Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -24,8 +24,8 @@ The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). */ #ifndef ZLIB_H @@ -37,11 +37,11 @@ extern "C" { #endif -#define ZLIB_VERSION "1.2.5" -#define ZLIB_VERNUM 0x1250 +#define ZLIB_VERSION "1.2.8" +#define ZLIB_VERNUM 0x1280 #define ZLIB_VER_MAJOR 1 #define ZLIB_VER_MINOR 2 -#define ZLIB_VER_REVISION 5 +#define ZLIB_VER_REVISION 8 #define ZLIB_VER_SUBREVISION 0 /* @@ -83,15 +83,15 @@ typedef void (*free_func) OF((voidpf opaque, voidpf address)); struct internal_state; typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ + z_const Bytef *next_in; /* next input byte */ uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ + uLong total_in; /* total number of input bytes read so far */ Bytef *next_out; /* next output byte should be put there */ uInt avail_out; /* remaining free space at next_out */ - uLong total_out; /* total nb of bytes output so far */ + uLong total_out; /* total number of bytes output so far */ - char *msg; /* last error message, NULL if no error */ + z_const char *msg; /* last error message, NULL if no error */ struct internal_state FAR *state; /* not visible by applications */ alloc_func zalloc; /* used to allocate the internal state */ @@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); Z_FINISH can be used immediately after deflateInit if all the compression is to be done in a single step. In this case, avail_out must be at least the - value returned by deflateBound (see below). If deflate does not return - Z_STREAM_END, then it must be called again as described above. + value returned by deflateBound (see below). Then deflate is guaranteed to + return Z_STREAM_END. If not enough output space is provided, deflate will + not return Z_STREAM_END, and it must be called again as described above. deflate() sets strm->adler to the adler32 checksum of all input read so far (that is, total_in bytes). @@ -451,23 +452,29 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); error. However if all decompression is to be performed in a single step (a single call of inflate), the parameter flush should be set to Z_FINISH. In this case all pending input is processed and all pending output is flushed; - avail_out must be large enough to hold all the uncompressed data. (The size - of the uncompressed data may have been saved by the compressor for this - purpose.) The next operation on this stream must be inflateEnd to deallocate - the decompression state. The use of Z_FINISH is never required, but can be - used to inform inflate that a faster approach may be used for the single - inflate() call. + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. In this implementation, inflate() always flushes as much output as possible to the output buffer, and always uses the faster approach on the - first call. So the only effect of the flush parameter in this implementation - is on the return value of inflate(), as noted below, or when it returns early - because Z_BLOCK or Z_TREES is used. + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm->adler to the adler32 checksum of the dictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise it sets - strm->adler to the adler32 checksum of all output produced so far (that is, + strm->adler to the Adler-32 checksum of all output produced so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described below. At the end of the stream, inflate() checks that its computed adler32 checksum is equal to that saved by the compressor and returns Z_STREAM_END @@ -478,7 +485,9 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); initializing with inflateInit2(). Any information contained in the gzip header is not retained, so applications that need that information should instead use raw inflate, see inflateInit2() below, or inflateBack() and - perform their own processing of the gzip header and trailer. + perform their own processing of the gzip header and trailer. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + producted so far. The CRC-32 is checked against the gzip trailer. inflate() returns Z_OK if some progress has been made (more input processed or more output produced), Z_STREAM_END if the end of the compressed data has @@ -580,10 +589,15 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, uInt dictLength)); /* Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any call - of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). The dictionary should consist of strings (byte sequences) that are likely to be encountered later in the data to be compressed, with the most commonly @@ -610,8 +624,8 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). */ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, @@ -688,9 +702,29 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, deflation of sourceLen bytes. It must be called after deflateInit() or deflateInit2(), and after deflateSetHeader(), if used. This would be used to allocate an output buffer for deflation in a single pass, and so would be - called before deflate(). + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. */ +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, int bits, int value)); @@ -703,8 +737,9 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, than or equal to 16, and that many of the least significant bits of value will be inserted in the output. - deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent. + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. */ ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, @@ -790,10 +825,11 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, if that call returned Z_NEED_DICT. The dictionary chosen by the compressor can be determined from the adler32 value returned by that call of inflate. The compressor and decompressor must use exactly the same dictionary (see - deflateSetDictionary). For raw inflate, this function can be called - immediately after inflateInit2() or inflateReset() and before any call of - inflate() to set the dictionary. The application must insure that the - dictionary that was used for compression is provided. + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is @@ -803,19 +839,38 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, inflate(). */ +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); /* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all available input is skipped. No output is provided. - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been - found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the - success case, the application may save the current current value of total_in - which indicates where valid compressed data was found. In the error case, - the application may repeatedly call inflateSync, providing more input each - time, until success or end of the input data. + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. */ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, @@ -962,12 +1017,13 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, See inflateBack() for the usage of these routines. inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of - the paramaters are invalid, Z_MEM_ERROR if the internal state could not be + the parameters are invalid, Z_MEM_ERROR if the internal state could not be allocated, or Z_VERSION_ERROR if the version of the library does not match the version of the header file. */ -typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, @@ -975,11 +1031,12 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, out_func out, void FAR *out_desc)); /* inflateBack() does a raw inflate with a single call using a call-back - interface for input and output. This is more efficient than inflate() for - file i/o applications in that it avoids copying between the output and the - sliding window by simply making the window itself the output buffer. This - function trusts the application to not change the output buffer passed by - the output function, at least until inflateBack() returns. + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. inflateBackInit() must be called first to allocate the internal state and to initialize the state with the user-provided window buffer. @@ -1088,6 +1145,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); 27-31: 0 (reserved) */ +#ifndef Z_SOLO /* utility functions */ @@ -1149,10 +1207,11 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, uncompress returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. */ - /* gzip file access functions */ /* @@ -1162,7 +1221,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, wrapper, documented in RFC 1952, wrapped around a deflate stream. */ -typedef voidp gzFile; /* opaque gzip file descriptor */ +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ /* ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); @@ -1172,13 +1231,28 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) Also "a" - can be used instead of "w" to request that the gzip stream that will be - written be appended to the file. "+" will result in an error, since reading - and writing to the same gzip file is not supported. + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. gzopen returns NULL if the file could not be opened, if there was insufficient memory to allocate the gzFile state, or if an invalid mode was @@ -1197,7 +1271,11 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. gzdopen returns NULL if there was insufficient memory to allocate the gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not @@ -1235,14 +1313,26 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); /* Reads the given number of uncompressed bytes from the compressed file. If - the input file was not in gzip format, gzread copies the given number of - bytes into the buffer. + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream, or failing that, reading the rest - of the input file directly without decompression. The entire input file - will be read if gzread is called until it returns less than the requested - len. + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. gzread returns the number of uncompressed bytes actually read, less than len for end of file, or -1 for error. @@ -1256,7 +1346,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file, error. */ -ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); /* Converts, formats, and writes the arguments to the compressed file under control of the format string, as in fprintf. gzprintf returns the number of @@ -1301,7 +1391,10 @@ ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); /* Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. */ ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); @@ -1397,9 +1490,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file)); ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); /* Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. This state can change from - false to true while reading the input file if the end of a gzip stream is - reached, but is followed by data that is not another gzip stream. + (0) if file is a gzip stream being decompressed. If the input file is empty, gzdirect() will return true, since the input does not contain a gzip stream. @@ -1408,6 +1499,13 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); cause buffers to be allocated to allow reading the file to determine if it is a gzip file. Therefore if gzbuffer() is used, it should be called before gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) */ ZEXTERN int ZEXPORT gzclose OF((gzFile file)); @@ -1419,7 +1517,8 @@ ZEXTERN int ZEXPORT gzclose OF((gzFile file)); must not be called more than once on the same allocation. gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, or Z_OK on success. + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. */ ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); @@ -1457,6 +1556,7 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); file that is being written concurrently. */ +#endif /* !Z_SOLO */ /* checksum functions */ @@ -1492,16 +1592,17 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. */ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); /* Update a running CRC-32 with the bytes buf[0..len-1] and return the updated CRC-32. If buf is Z_NULL, this function returns the required - initial value for the for the crc. Pre- and post-conditioning (one's - complement) is performed within this function so it shouldn't be done by the - application. + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. Usage example: @@ -1544,17 +1645,42 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, const char *version, int stream_size)); #define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) #define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) #define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) #define inflateBackInit(strm, windowBits, window) \ inflateBackInit_((strm), (windowBits), (window), \ - ZLIB_VERSION, sizeof(z_stream)) + ZLIB_VERSION, (int)sizeof(z_stream)) + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#endif /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if @@ -1562,7 +1688,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, * functions are changed to 64 bits) -- in case these are set on systems * without large file support, _LFS64_LARGEFILE must also be true */ -#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +#ifdef Z_LARGE64 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); @@ -1571,14 +1697,23 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); #endif -#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0 -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# ifdef _LARGEFILE64_SOURCE +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); @@ -1595,6 +1730,13 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); #endif +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + /* hack for buggy compilers */ #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) struct internal_state {int dummy;}; @@ -1603,8 +1745,21 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, /* undocumented functions */ ZEXTERN const char * ZEXPORT zError OF((int)); ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); -ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif #ifdef __cplusplus } diff --git a/thirdparty/libz/zutil.c b/thirdparty/libz/zutil.c index 898ed345..23d2ebef 100644 --- a/thirdparty/libz/zutil.c +++ b/thirdparty/libz/zutil.c @@ -1,17 +1,20 @@ /* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005, 2010 Jean-loup Gailly. + * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ /* @(#) $Id$ */ #include "zutil.h" +#ifndef Z_SOLO +# include "gzguts.h" +#endif #ifndef NO_DUMMY_DECL struct internal_state {int dummy;}; /* for buggy compilers */ #endif -const char * const z_errmsg[10] = { +z_const char * const z_errmsg[10] = { "need dictionary", /* Z_NEED_DICT 2 */ "stream end", /* Z_STREAM_END 1 */ "", /* Z_OK 0 */ @@ -85,27 +88,27 @@ uLong ZEXPORT zlibCompileFlags() #ifdef FASTEST flags += 1L << 21; #endif -#ifdef STDC +#if defined(STDC) || defined(Z_HAVE_STDARG_H) # ifdef NO_vsnprintf - flags += 1L << 25; + flags += 1L << 25; # ifdef HAS_vsprintf_void - flags += 1L << 26; + flags += 1L << 26; # endif # else # ifdef HAS_vsnprintf_void - flags += 1L << 26; + flags += 1L << 26; # endif # endif #else - flags += 1L << 24; + flags += 1L << 24; # ifdef NO_snprintf - flags += 1L << 25; + flags += 1L << 25; # ifdef HAS_sprintf_void - flags += 1L << 26; + flags += 1L << 26; # endif # else # ifdef HAS_snprintf_void - flags += 1L << 26; + flags += 1L << 26; # endif # endif #endif @@ -181,6 +184,7 @@ void ZLIB_INTERNAL zmemzero(dest, len) } #endif +#ifndef Z_SOLO #ifdef SYS16BIT @@ -316,3 +320,5 @@ void ZLIB_INTERNAL zcfree (opaque, ptr) } #endif /* MY_ZCALLOC */ + +#endif /* !Z_SOLO */ diff --git a/thirdparty/libz/zutil.h b/thirdparty/libz/zutil.h index 258fa887..24ab06b1 100644 --- a/thirdparty/libz/zutil.h +++ b/thirdparty/libz/zutil.h @@ -1,5 +1,5 @@ /* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2010 Jean-loup Gailly. + * Copyright (C) 1995-2013 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -13,7 +13,7 @@ #ifndef ZUTIL_H #define ZUTIL_H -#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ) +#ifdef HAVE_HIDDEN # define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) #else # define ZLIB_INTERNAL @@ -21,7 +21,7 @@ #include "zlib.h" -#ifdef STDC +#if defined(STDC) && !defined(Z_SOLO) # if !(defined(_WIN32_WCE) && defined(_MSC_VER)) # include # endif @@ -29,6 +29,10 @@ # include #endif +#ifdef Z_SOLO + typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#endif + #ifndef local # define local static #endif @@ -40,13 +44,13 @@ typedef unsigned short ush; typedef ush FAR ushf; typedef unsigned long ulg; -extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ /* (size given to avoid silly warnings with Visual C++) */ #define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] #define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) + return (strm->msg = ERR_MSG(err), (err)) /* To be used only when the state is known to be valid */ /* common constants */ @@ -78,16 +82,18 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) # define OS_CODE 0x00 -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include +# ifndef Z_SOLO +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif +# else /* MSC or DJGPP */ +# include # endif -# else /* MSC or DJGPP */ -# include # endif #endif @@ -107,18 +113,20 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #ifdef OS2 # define OS_CODE 0x06 -# ifdef M_I86 +# if defined(M_I86) && !defined(Z_SOLO) # include # endif #endif #if defined(MACOS) || defined(TARGET_OS_MAC) # define OS_CODE 0x07 -# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include /* for fdopen */ -# else -# ifndef fdopen -# define fdopen(fd,mode) NULL /* No fdopen() */ +# ifndef Z_SOLO +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif # endif # endif #endif @@ -153,14 +161,15 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ # endif #endif -#if defined(__BORLANDC__) +#if defined(__BORLANDC__) && !defined(MSDOS) #pragma warn -8004 #pragma warn -8008 #pragma warn -8066 #endif /* provide prototypes for these when building zlib without LFS */ -#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 +#if !defined(_WIN32) && \ + (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); #endif @@ -177,42 +186,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ /* functions */ -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS - /* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 - /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) -# define vsnprintf _vsnprintf -# endif -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -#endif -#ifdef VMS -# define NO_vsnprintf -#endif - -#if defined(pyr) +#if defined(pyr) || defined(Z_SOLO) # define NO_MEMCPY #endif #if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) @@ -261,14 +235,19 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ # define Tracecv(c,x) #endif - -voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, - unsigned size)); -void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); +#ifndef Z_SOLO + voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, + unsigned size)); + void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); +#endif #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size)) #define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) #define TRY_FREE(s, p) {if (p) ZFREE(s, p);} +/* Reverse the bytes in a 32-bit value */ +#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + #endif /* ZUTIL_H */