* Better document usage of opj_set_decode_area(), ie expecting coordinates
in full resolution/reference grid even if requesting at a lower resolution
factor
* Make sure that image->comps[].factor is set by opj_set_decode_area() and
opj_decode() from the value specified in opj_set_decoded_resolution_factor()
* opj_decompress: add 2 environmenet variables to test alternate ways of
using the API, namely USE_OPJ_SET_DECODED_RESOLUTION_FACTOR=YES to use
opj_set_decoded_resolution_factor() instead of parameters.cp_reduce, and
SKIP_OPJ_SET_DECODE_AREA=YES to not call opj_set_decode_area() if -d is
not specified.
PR #975 introduced a check that rejects images that have different bit depth/sign
per compoment in SIZ marker if the JP2 IHDR box has BPC != 255
This didn't work properly if decoding a .j2k file since the new bit added in
opj_cp_t wasn't initialized to the right value.
For clarity, tThis new bit has also been renamed to allow_different_bit_depth_sign
But looking closer at the code, it seems we were already tolerant to inconsistencies.
For example we parsed a JP2 BPCC box even if BPC != 255 (just a warning is emitted)
So failing hard in opj_j2k_read_siz() wouldn't be very inconsistent, and that
alone cannot protect against other issues, so just emit a warning if BPC != 255
and the SIZ marker contains different bit depth/sign per component.
Note: we could also check that the content of JP2 BPCC box is consistant with the one
of the SIZ marker.
Currently we allocate at least 8192 bytes for each codeblock, and copy
the relevant parts of the codestream in that per-codeblock buffer as we
decode packets.
As the whole codestream for the tile is ingested in memory and alive
during the decoding, we can directly point to it instead of copying. But
to do that, we need an intermediate concept, a 'chunk' of code-stream segment,
given that segments may be made of data at different places in the code-stream
when quality layers are used.
With that change, the decoding of MAPA_005.jp2 goes down from the previous
improvement of 2.7 GB down to 1.9 GB.
New profile:
n4: 1885648469 (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
n1: 1610689344 0x4E78287: opj_aligned_malloc (opj_malloc.c:61)
n1: 1610689344 0x4E71D7B: opj_alloc_tile_component_data (tcd.c:676)
n1: 1610689344 0x4E7272C: opj_tcd_init_decode_tile (tcd.c:816)
n1: 1610689344 0x4E4BDD9: opj_j2k_read_tile_header (j2k.c:8618)
n1: 1610689344 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 1610689344 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 1610689344 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40374E: main (opj_decompress.c:1459)
n1: 219232541 0x4E4BBF0: opj_j2k_read_tile_header (j2k.c:4685)
n1: 219232541 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 219232541 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 219232541 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 219232541 0x40374E: main (opj_decompress.c:1459)
n1: 39822000 0x4E727A9: opj_tcd_init_decode_tile (tcd.c:1219)
n1: 39822000 0x4E4BDD9: opj_j2k_read_tile_header (j2k.c:8618)
n1: 39822000 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 39822000 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 39822000 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 39822000 0x40374E: main (opj_decompress.c:1459)
n0: 15904584 in 52 places, all below massif's threshold (1.00%)
b7594c0fcb9dd3aa6356d72c4a525d76168da689 may put opj_tcd_tilecomp_t->data
allocated by opj_alloc_tile_component_data() as the image->comps[].data. As
opj_alloc_tile_component_data() use opj_aligned_malloc() we must be sure to
ue opj_alined_malloc()/_free() in all places where we alloc/free
image->comps[].data.
Note: this might have some compatibility impact in case user code does itself
the allocation/free of image->comps[].data
When components don't have the same width, unaligned load/store are possible.
Fixes openjeg-crashes-2017-07-27/id:000000,sig:11,src:001342,op:flip4,pos:162.jp2 of #895
Fixes issue on id:000020,sig:06,src:001958,op:flip4,pos:149 that has two
SOT markers for the same tile with the same tile part number, causing
opj_j2k_merge_ppt() to be called several times.
By default, only the main thread is used. If opj_codec_set_threads() is not used,
but the OPJ_NUM_THREADS environment variable is set, its value will be
used to initialize the number of threads. The value can be either an integer
number, or "ALL_CPUS". If OPJ_NUM_THREADS is set and this function is called,
this function will override the behaviour of the environment variable.
* Fix unsigned int overflow reported by UBSan
Please add -DOPJ_UBSAN_BUILD to CFLAGS when building with
-fsanitize=undefined,unsigned-integer-overflow
It seems clang/gcc do not allow to disable checking for block of code
other than function or file.
Even Rouault
Stefan Weil
Antonin Descampe
szukw000
Matthieu Darbois
julienmalik