pcre2/doc/pcre2compat.3

.TH PCRE2COMPAT 3 "03 April 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH "DIFFERENCES BETWEEN PCRE2 AND PERL"
.rs
.sp
This document describes the differences in the ways that PCRE2 and Perl handle
regular expressions. The differences described here are with respect to Perl
versions 5.24, but as both Perl and PCRE2 are continually changing, the
information may sometimes be out of date.
.P
1. PCRE2 has only a subset of Perl's Unicode support. Details of what it does
have are given in the
.\" HREF
\fBpcre2unicode\fP
.\"
page.
.P
2. Like Perl, PCRE2 allows repeat quantifiers on parenthesized assertions, but
they do not mean what you might think. For example, (?!a){3} does not assert
that the next three characters are not "a". It just asserts that the next
character is not "a" three times (in principle: PCRE2 optimizes this to run the
assertion just once). Perl allows some repeat quantifiers on other assertions,
for example, \eb* (but not \eb{3}), but these do not seem to have any use.
.P
3. Capturing subpatterns that occur inside negative lookaround assertions are
counted, but their entries in the offsets vector are set only when a negative
assertion is a condition that has a matching branch (that is, the condition is
false).
.P
4. The following Perl escape sequences are not supported: \el, \eu, \eL,
\eU, and \eN when followed by a character name or Unicode value. (\eN on its
own, matching a non-newline character, is supported.) In fact these are
implemented by Perl's general string-handling and are not part of its pattern
matching engine. If any of these are encountered by PCRE2, an error is
generated by default. However, if the PCRE2_ALT_BSUX option is set,
\eU and \eu are interpreted as ECMAScript interprets them.
.P
5. The Perl escape sequences \ep, \eP, and \eX are supported only if PCRE2 is
built with Unicode support (the default). The properties that can be tested
with \ep and \eP are limited to the general category properties such as Lu and
Nd, script names such as Greek or Han, and the derived properties Any and L&.
PCRE2 does support the Cs (surrogate) property, which Perl does not; the Perl
documentation says "Because Perl hides the need for the user to understand the
internal representation of Unicode characters, there is no need to implement
the somewhat messy concept of surrogates."
.P
6. PCRE2 does support the \eQ...\eE escape for quoting substrings. Characters
in between are treated as literals. This is slightly different from Perl in
that $ and @ are also handled as literals inside the quotes. In Perl, they
cause variable interpolation (but of course PCRE2 does not have variables).
Note the following examples:
.sp
    Pattern            PCRE2 matches      Perl matches
.sp
.\" JOIN
    \eQabc$xyz\eE        abc$xyz           abc followed by the
                                           contents of $xyz
    \eQabc\e$xyz\eE       abc\e$xyz          abc\e$xyz
    \eQabc\eE\e$\eQxyz\eE   abc$xyz           abc$xyz
.sp
The \eQ...\eE sequence is recognized both inside and outside character classes.
.P
7. Fairly obviously, PCRE2 does not support the (?{code}) and (??{code})
constructions. However, there is support PCRE2's "callout" feature, which
allows an external function to be called during pattern matching. See the
.\" HREF
\fBpcre2callout\fP
.\"
documentation for details.
.P
8. Subroutine calls (whether recursive or not) were treated as atomic groups up
to PCRE2 release 10.23, but from release 10.30 this changed, and backtracking
into subroutine calls is now supported, as in Perl. 
.P
9. If any of the backtracking control verbs are used in a subpattern that is
called as a subroutine (whether or not recursively), their effect is confined
to that subpattern; it does not extend to the surrounding pattern. This is not
always the case in Perl. In particular, if (*THEN) is present in a group that
is called as a subroutine, its action is limited to that group, even if the
group does not contain any | characters. Note that such subpatterns are
processed as anchored at the point where they are tested.
.P
10. If a pattern contains more than one backtracking control verb, the first
one that is backtracked onto acts. For example, in the pattern
A(*COMMIT)B(*PRUNE)C a failure in B triggers (*COMMIT), but a failure in C
triggers (*PRUNE). Perl's behaviour is more complex; in many cases it is the
same as PCRE2, but there are cases where it differs.
.P
11. Most backtracking verbs in assertions have their normal actions. They are
not confined to the assertion.
.P
12. There are some differences that are concerned with the settings of captured
strings when part of a pattern is repeated. For example, matching "aba" against
the pattern /^(a(b)?)+$/ in Perl leaves $2 unset, but in PCRE2 it is set to
"b".
.P
13. PCRE2's handling of duplicate subpattern numbers and duplicate subpattern
names is not as general as Perl's. This is a consequence of the fact the PCRE2
works internally just with numbers, using an external table to translate
between numbers and names. In particular, a pattern such as (?|(?<a>A)|(?<b>B),
where the two capturing parentheses have the same number but different names,
is not supported, and causes an error at compile time. If it were allowed, it
would not be possible to distinguish which parentheses matched, because both
names map to capturing subpattern number 1. To avoid this confusing situation,
an error is given at compile time.
.P
14. Perl used to recognize comments in some places that PCRE2 does not, for
example, between the ( and ? at the start of a subpattern. If the /x modifier
is set, Perl allowed white space between ( and ? though the latest Perls give
an error (for a while it was just deprecated). There may still be some cases
where Perl behaves differently.
.P
15. Perl, when in warning mode, gives warnings for character classes such as
[A-\ed] or [a-[:digit:]]. It then treats the hyphens as literals. PCRE2 has no
warning features, so it gives an error in these cases because they are almost
certainly user mistakes.
.P
16. In PCRE2, the upper/lower case character properties Lu and Ll are not
affected when case-independent matching is specified. For example, \ep{Lu}
always matches an upper case letter. I think Perl has changed in this respect;
in the release at the time of writing (5.24), \ep{Lu} and \ep{Ll} match all
letters, regardless of case, when case independence is specified.
.P
17. PCRE2 provides some extensions to the Perl regular expression facilities.
Perl 5.10 includes new features that are not in earlier versions of Perl, some
of which (such as named parentheses) were in PCRE2 for some time before. This
list is with respect to Perl 5.24:
.sp
(a) Although lookbehind assertions in PCRE2 must match fixed length strings,
each alternative branch of a lookbehind assertion can match a different length
of string. Perl requires them all to have the same length.
.sp
(b) From PCRE2 10.23, back references to groups of fixed length are supported
in lookbehinds, provided that there is no possibility of referencing a
non-unique number or name. Perl does not support backreferences in lookbehinds.
.sp
(c) If PCRE2_DOLLAR_ENDONLY is set and PCRE2_MULTILINE is not set, the $
meta-character matches only at the very end of the string.
.sp
(d) A backslash followed by a letter with no special meaning is faulted. (Perl
can be made to issue a warning.)
.sp
(e) If PCRE2_UNGREEDY is set, the greediness of the repetition quantifiers is
inverted, that is, by default they are not greedy, but if followed by a
question mark they are.
.sp
(f) PCRE2_ANCHORED can be used at matching time to force a pattern to be tried
only at the first matching position in the subject string.
.sp
(g) The PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY, PCRE2_NOTEMPTY_ATSTART, and
PCRE2_NO_AUTO_CAPTURE options have no Perl equivalents.
.sp
(h) The \eR escape sequence can be restricted to match only CR, LF, or CRLF
by the PCRE2_BSR_ANYCRLF option.
.sp
(i) The callout facility is PCRE2-specific.
.sp
(j) The partial matching facility is PCRE2-specific.
.sp
(k) The alternative matching function (\fBpcre2_dfa_match()\fP matches in a
different way and is not Perl-compatible.
.sp
(l) PCRE2 recognizes some special sequences such as (*CR) at the start of
a pattern that set overall options that cannot be changed within the pattern.
.
.
.SH AUTHOR
.rs
.sp
.nf
Philip Hazel
University Computing Service
Cambridge, England.
.fi
.
.
.SH REVISION
.rs
.sp
.nf
Last updated: 03 April 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi