pcre2/maint/ManyConfigTests

375 lines
11 KiB
Plaintext
Raw Normal View History

#! /bin/sh
# This is a script for the use of PCRE2 maintainers. It configures and rebuilds
# PCRE2 with a variety of configuration options, and in each case runs the
# tests to ensure that all goes well. Every possible combination would take far
# too long, so we use a representative sample. This script should be run in the
# PCRE2 source directory.
# While debugging, it is sometimes useful to be able to cut out some of the
# tests, in order to run those that are giving errors. The following options
# do this:
#
# -noasan skip the test that uses -fsanitize=address
# -nojit skip JIT tests
# -nomain skip the main set of tests
# -notmp skip the test in a temporary directory
# -novalgrind skip the valgrind tests
# The -v option causes a call to 'pcre2test -C' to happen for each
# configuration.
# Some of the tests are automatically skipped when PCRE2 is built with non-Unix
# newline recognition because they don't work. I am hoping to reduce this as
# much as possible in due course.
useasan=1
usejit=1
usemain=1
usetmp=1
usevalgrind=1
verbose=0
while [ $# -gt 0 ] ; do
case $1 in
-noasan) useasan=0;;
-nojit) usejit=0;;
-nomain) usemain=0;;
-notmp) usetmp=0;;
-novalgrind) usevalgrind=0;;
-v) verbose=1;;
*) echo "Unknown option '$1'"; exit 1;;
esac
shift
done
# This is in case the caller has set aliases (as I do - PH)
unset cp ls mv rm
# This is a temporary directory for testing out-of-line builds
tmp=/tmp/pcre2testing
# Don't bother with compiler optimization for most tests; it just slows down
# compilation a lot (and running the tests themselves is quick). However, one
# special test turns optimization on, because it can provoke some compiler
# warnings.
CFLAGS="-g"
OFLAGS="-O0"
ISGCC=0
# If the compiler is gcc, add a lot of warning switches.
2014-11-18 19:32:12 +01:00
cc --version >/tmp/pcre2ccversion 2>/dev/null
if [ $? -eq 0 ] && grep GCC /tmp/pcre2ccversion >/dev/null; then
ISGCC=1
CFLAGS="$CFLAGS -Wall"
CFLAGS="$CFLAGS -Wno-overlength-strings"
CFLAGS="$CFLAGS -Wpointer-arith"
CFLAGS="$CFLAGS -Wwrite-strings"
CFLAGS="$CFLAGS -Wundef -Wshadow"
CFLAGS="$CFLAGS -Wmissing-field-initializers"
CFLAGS="$CFLAGS -Wunused-parameter"
CFLAGS="$CFLAGS -Wextra -Wformat"
CFLAGS="$CFLAGS -Wbad-function-cast"
CFLAGS="$CFLAGS -Wmissing-declarations"
CFLAGS="$CFLAGS -Wnested-externs"
CFLAGS="$CFLAGS -pedantic"
CFLAGS="$CFLAGS -Wuninitialized"
CFLAGS="$CFLAGS -Wmissing-prototypes"
CFLAGS="$CFLAGS -Wstrict-prototypes"
fi
2014-11-18 19:32:12 +01:00
rm -f /tmp/pcre2ccversion
# This function runs a single test with the set of configuration options that
2014-10-16 18:22:44 +02:00
# are in $opts. The source directory must be set in srcdir. The function must
# be defined as "runtest()" not "function runtest()" in order to run on
2014-10-16 18:22:44 +02:00
# Solaris.
2014-10-16 18:22:44 +02:00
runtest()
{
rm -f $srcdir/pcre2test $srcdir/pcre2grep $srcdir/pcre2_jit_test
testcount=`expr $testcount + 1`
if [ "$opts" = "" ] ; then
echo "[$testcount/$testtotal] Configuring with: default settings"
else
echo "[$testcount/$testtotal] Configuring with:"
echo " $opts"
fi
CFLAGS="$CFLAGS" \
$srcdir/configure $opts >/dev/null 2>teststderr
if [ $? -ne 0 ]; then
echo " "
echo "******** Error while configuring ********"
cat teststderr
exit 1
fi
echo "Making"
make -j >/dev/null 2>teststderr
if [ $? -ne 0 -o -s teststderr ]; then
echo " "
echo "******** Errors or warnings while making ********"
echo " "
cat teststderr
exit 1
fi
if [ $verbose -eq 1 ]; then
./pcre2test -C
fi
nl=`./pcre2test -C newline`
if [ "$nl" = "LF" -o "$nl" = "ANY" -o "$nl" = "ANYCRLF" ]; then
nlok=1
else
nlok=0
fi
./pcre2test -C jit >/dev/null
jit=$?
./pcre2test -C pcre2-8 >/dev/null
pcre2_8=$?
if [ $nlok -gt 0 ]; then
echo "Running C library tests $withvalgrind"
$srcdir/RunTest $valgrind >teststdout 2>teststderr
if [ $? -ne 0 -o -s teststderr ]; then
echo " "
echo "**** Test failed ****"
cat teststderr
if [ -s teststdout ] ; then cat teststdout; fi
exit 1
fi
else
echo "Skipping C library tests: newline is $nl"
fi
if [ $nlok -gt 0 -a $pcre2_8 -gt 0 ]; then
echo "Running pcre2grep tests $withvalgrind"
$srcdir/RunGrepTest $valgrind >teststdout 2>teststderr
if [ $? -ne 0 -o -s teststderr ]; then
echo " "
echo "**** Test failed ****"
cat teststderr
cat teststdout
exit 1
fi
elif [ $nlok -gt 0 ]; then
echo "Skipping pcre2grep tests: 8-bit library not compiled"
else
echo "Skipping pcre2grep tests: newline is $nl"
fi
2014-11-18 19:32:12 +01:00
if [ "$jit" -gt 0 ]; then
echo "Running JIT regression tests $withvalgrind"
$cvalgrind $srcdir/pcre2_jit_test >teststdout 2>teststderr
if [ $? -ne 0 -o -s teststderr ]; then
echo " "
echo "**** Test failed ****"
cat teststderr
cat teststdout
exit 1
fi
else
2014-11-18 19:32:12 +01:00
echo "Skipping JIT regression tests: JIT is not enabled"
fi
}
# Update the total count whenever a new test is added; it is used to show
# progess as each test is run.
2015-04-24 13:14:47 +02:00
testtotal=`expr 21 \* $usemain + \
1 \* $usetmp + \
1 \* $ISGCC \* $usemain + \
1 \* $ISGCC \* $usemain \* $useasan + \
13 \* $usejit + \
\( 3 + 2 \* $usejit \) \* $usevalgrind`
testcount=0
# This set of tests builds PCRE2 and runs the tests with a variety of configure
# options, in the current (source) directory. The empty configuration builds
# with all the default settings. As well as testing that these options work, we
# use --disable-shared or --disable-static after the default test (which builds
# both) to save a bit of time by building only one version of the library for
# the subsequent tests.
valgrind=
cvalgrind=
withvalgrind=
srcdir=.
export srcdir
# If gcc is in use, run a maximally configured test with -O2, because that can
# throw up warnings that are not detected with -O0. Then run a second test with
# -fsanitize=address, which also may throw up new warnings as well as checking
# things at runtime. Using -fsanitize=address increases the size of stack
# frames by a lot, so run this test with --disable-stack-for-recursion, as
# otherwise RunTest may fail on test 2.
if [ $usejit -ne 0 ]; then
enable_jit=--enable-jit
else
enable_jit=
fi
if [ $ISGCC -ne 0 -a $usemain -ne 0 ]; then
echo "---------- Maximally configured test with -O2 ----------"
SAVECFLAGS="$CFLAGS"
CFLAGS="-O2 $CFLAGS"
echo "CFLAGS=$CFLAGS"
2014-11-03 19:27:56 +01:00
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
runtest
if [ $useasan -ne 0 ]; then
echo "---------- Maximally configured test with -fsanitize=address ----------"
CFLAGS="$OFLAGS $SAVECFLAGS -fsanitize=address"
echo "CFLAGS=$CFLAGS"
opts="--disable-shared $enable_jit --disable-stack-for-recursion --enable-pcre2-16 --enable-pcre2-32"
runtest
fi
CFLAGS="$OFLAGS $SAVECFLAGS"
fi
echo "---------- CFLAGS for the remaining tests ----------"
echo "CFLAGS=$CFLAGS"
if [ $usemain -ne 0 ]; then
2015-04-24 13:14:47 +02:00
echo "---------- Maximally configured test with --enable-debug ----------"
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32 --enable-debug"
runtest
echo "---------- Non-JIT tests in the current directory ----------"
for opts in \
"" \
2014-11-03 19:27:56 +01:00
"--disable-static" \
"--disable-shared" \
"--disable-unicode --disable-stack-for-recursion --disable-shared" \
"--disable-stack-for-recursion --disable-shared" \
2014-11-03 19:27:56 +01:00
"--with-link-size=3 --disable-shared" \
"--disable-unicode --enable-rebuild-chartables --disable-shared" \
"--disable-unicode --enable-newline-is-any --disable-shared" \
"--disable-unicode --enable-newline-is-cr --disable-shared" \
"--disable-unicode --enable-newline-is-crlf --disable-shared" \
"--disable-unicode --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared" \
"--enable-newline-is-any --disable-stack-for-recursion --disable-static" \
"--disable-unicode --enable-pcre2-16" \
"--disable-unicode --enable-pcre2-16 --disable-stack-for-recursion --disable-shared" \
"--enable-pcre2-16 --disable-stack-for-recursion --disable-shared" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-pcre2-32" \
"--disable-unicode --enable-pcre2-32 --disable-stack-for-recursion --disable-shared" \
"--enable-pcre2-32 --disable-stack-for-recursion --disable-shared" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-shared" \
"--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --disable-shared"
do
runtest
done
fi
# Now run the JIT tests unless disabled
if [ $usejit -ne 0 ]; then
echo "---------- JIT tests in the current directory ----------"
for opts in \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-jit --disable-shared" \
"--enable-jit --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --with-link-size=3 --disable-shared" \
"--enable-jit --enable-pcre2-16 --disable-shared" \
"--disable-unicode --enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
"--enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --enable-pcre2-16 --with-link-size=3 --disable-shared" \
"--enable-jit --enable-pcre2-16 --with-link-size=4 --disable-shared" \
"--enable-jit --enable-pcre2-32 --disable-shared" \
"--disable-unicode --enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
"--enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --enable-pcre2-32 --with-link-size=4 --disable-shared" \
"--enable-jit --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared"
do
runtest
done
fi
# Now re-run some of the tests under valgrind.
if [ $usevalgrind -ne 0 ]; then
echo "---------- Tests in the current directory using valgrind ----------"
valgrind=valgrind
cvalgrind="valgrind -q --smc-check=all"
withvalgrind="with valgrind"
for opts in \
2014-11-03 19:27:56 +01:00
"--disable-stack-for-recursion --disable-shared" \
"--with-link-size=3 --enable-pcre2-16 --enable-pcre2-32 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --disable-shared"
do
opts="--enable-valgrind $opts"
runtest
done
if [ $usejit -ne 0 ]; then
for opts in \
2014-11-03 19:27:56 +01:00
"--enable-jit --disable-shared" \
"--enable-jit --enable-pcre2-16 --enable-pcre2-32"
do
opts="--enable-valgrind $opts"
runtest
done
fi
fi
valgrind=
cvalgrind=
withvalgrind=
# Clean up the distribution and then do at least one build and test in a
# directory other than the source directory. It doesn't work unless the
# source directory is cleaned up first.
if [ -f Makefile ]; then
echo "Running 'make distclean'"
make distclean >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "** 'make distclean' failed"
exit 1
fi
fi
echo "---------- Tests in the $tmp directory ----------"
srcdir=`pwd`
export srcdir
if [ ! -e $tmp ]; then
mkdir $tmp
fi
if [ ! -d $tmp ]; then
echo "** Failed to create $tmp or it is not a directory"
exit 1
fi
cd $tmp
if [ $? -ne 0 ]; then
echo "** Failed to cd to $tmp"
exit 1
fi
if [ $usetmp -ne 0 ]; then
for opts in \
2014-11-03 19:27:56 +01:00
"--disable-shared"
do
runtest
done
fi
echo "Removing $tmp"
rm -rf $tmp
echo "All done"
# End