pcre2/doc/pcre2grep.txt

PCRE2GREP(1)                General Commands Manual               PCRE2GREP(1)



NAME
       pcre2grep - a grep with Perl-compatible regular expressions.

SYNOPSIS
       pcre2grep [options] [long options] [pattern] [path1 path2 ...]


DESCRIPTION

       pcre2grep  searches  files  for  character patterns, in the same way as
       other grep commands do,  but  it  uses  the  PCRE2  regular  expression
       library  to  support  patterns  that  are  compatible  with the regular
       expressions of Perl 5. See pcre2syntax(3) for a quick-reference summary
       of  pattern  syntax,  or  pcre2pattern(3) for a full description of the
       syntax and semantics of the regular expressions that PCRE2 supports.

       Patterns, whether supplied on the command line or in a  separate  file,
       are given without delimiters. For example:

         pcre2grep Thursday /etc/motd

       If you attempt to use delimiters (for example, by surrounding a pattern
       with slashes, as is common in Perl scripts), they  are  interpreted  as
       part  of  the pattern. Quotes can of course be used to delimit patterns
       on the command line because they are  interpreted  by  the  shell,  and
       indeed  quotes  are required if a pattern contains white space or shell
       metacharacters.

       The first argument that follows any option settings is treated  as  the
       single  pattern  to be matched when neither -e nor -f is present.  Con-
       versely, when one or both of these options are  used  to  specify  pat-
       terns, all arguments are treated as path names. At least one of -e, -f,
       or an argument pattern must be provided.

       If no files are specified, pcre2grep  reads  the  standard  input.  The
       standard  input can also be referenced by a name consisting of a single
       hyphen.  For example:

         pcre2grep some-pattern file1 - file3

       Input files are searched line by  line.  By  default,  each  line  that
       matches  a  pattern  is  copied to the standard output, and if there is
       more than one file, the file name is output at the start of each  line,
       followed  by  a  colon.  However, there are options that can change how
       pcre2grep behaves. In particular, the -M option makes  it  possible  to
       search  for  strings  that  span  line  boundaries. What defines a line
       boundary is controlled by the -N (--newline) option.

       The amount of memory used for buffering files that are being scanned is
       controlled  by a parameter that can be set by the --buffer-size option.
       The default value for this parameter is  specified  when  pcre2grep  is
       built,  with  the  default  default  being 20K. A block of memory three
       times this size is used (to allow for buffering  "before"  and  "after"
       lines). An error occurs if a line overflows the buffer.

       Patterns  can  be  no  longer than 8K or BUFSIZ bytes, whichever is the
       greater.  BUFSIZ is defined in <stdio.h>. When there is more  than  one
       pattern (specified by the use of -e and/or -f), each pattern is applied
       to each line in the order in which they are defined,  except  that  all
       the -e patterns are tried before the -f patterns.

       By  default, as soon as one pattern matches a line, no further patterns
       are considered. However, if --colour (or --color) is used to colour the
       matching  substrings, or if --only-matching, --file-offsets, or --line-
       offsets is used to output only  the  part  of  the  line  that  matched
       (either shown literally, or as an offset), scanning resumes immediately
       following the match, so that further matches on the same  line  can  be
       found.  If  there  are  multiple  patterns,  they  are all tried on the
       remainder of the line, but patterns that follow the  one  that  matched
       are not tried on the earlier part of the line.

       This  behaviour  means  that  the  order in which multiple patterns are
       specified can affect the output when one of the above options is  used.
       This  is no longer the same behaviour as GNU grep, which now manages to
       display earlier matches for later patterns (as  long  as  there  is  no
       overlap).

       Patterns  that can match an empty string are accepted, but empty string
       matches   are   never   recognized.   An   example   is   the   pattern
       "(super)?(man)?",  in  which  all components are optional. This pattern
       finds all occurrences of both "super" and  "man";  the  output  differs
       from  matching  with  "super|man" when only the matching substrings are
       being shown.

       If the LC_ALL or LC_CTYPE environment variable is set,  pcre2grep  uses
       the value to set a locale when calling the PCRE2 library.  The --locale
       option can be used to override this.


SUPPORT FOR COMPRESSED FILES

       It is possible to compile pcre2grep so that it uses libz or  libbz2  to
       read  files  whose names end in .gz or .bz2, respectively. You can find
       out whether your binary has support for one or both of these file types
       by running it with the --help option. If the appropriate support is not
       present, files are treated as plain text. The standard input is  always
       so treated.


BINARY FILES

       By  default,  a  file that contains a binary zero byte within the first
       1024 bytes is identified as a binary file, and is processed  specially.
       (GNU  grep  also  identifies  binary  files  in  this  manner.) See the
       --binary-files option for a means of changing the way binary files  are
       handled.


OPTIONS

       The  order  in  which some of the options appear can affect the output.
       For example, both the -h and -l options affect  the  printing  of  file
       names.  Whichever  comes later in the command line will be the one that
       takes effect. Similarly, except where noted  below,  if  an  option  is
       given  twice,  the  later setting is used. Numerical values for options
       may be followed by K  or  M,  to  signify  multiplication  by  1024  or
       1024*1024 respectively.

       --        This terminates the list of options. It is useful if the next
                 item on the command line starts with a hyphen but is  not  an
                 option.  This  allows for the processing of patterns and file
                 names that start with hyphens.

       -A number, --after-context=number
                 Output number lines of context after each matching  line.  If
                 file  names  and/or  line  numbers are being output, a hyphen
                 separator is used instead of a colon for the context lines. A
                 line  containing  "--" is output between each group of lines,
                 unless they are in fact contiguous in  the  input  file.  The
                 value  of number is expected to be relatively small. However,
                 pcre2grep guarantees to have  up  to  8K  of  following  text
                 available for context output.

       -a, --text
                 Treat  binary  files as text. This is equivalent to --binary-
                 files=text.

       -B number, --before-context=number
                 Output number lines of context before each matching line.  If
                 file  names  and/or  line  numbers are being output, a hyphen
                 separator is used instead of a colon for the context lines. A
                 line  containing  "--" is output between each group of lines,
                 unless they are in fact contiguous in  the  input  file.  The
                 value  of number is expected to be relatively small. However,
                 pcre2grep guarantees to have  up  to  8K  of  preceding  text
                 available for context output.

       --binary-files=word
                 Specify  how binary files are to be processed. If the word is
                 "binary" (the default),  pattern  matching  is  performed  on
                 binary  files,  but  the  only  output is "Binary file <name>
                 matches" when a match succeeds. If the word is "text",  which
                 is  equivalent  to  the -a or --text option, binary files are
                 processed in the same way as any other file.  In  this  case,
                 when  a  match  succeeds,  the  output may be binary garbage,
                 which can have nasty effects if sent to a  terminal.  If  the
                 word  is  "without-match",  which  is  equivalent  to  the -I
                 option, binary files are  not  processed  at  all;  they  are
                 assumed not to be of interest and are skipped without causing
                 any output or affecting the return code.

       --buffer-size=number
                 Set the parameter that controls how much memory is  used  for
                 buffering files that are being scanned.

       -C number, --context=number
                 Output  number  lines  of  context both before and after each
                 matching line.  This is equivalent to setting both -A and  -B
                 to the same value.

       -c, --count
                 Do  not  output  lines from the files that are being scanned;
                 instead output the number of matches (or non-matches if -v is
                 used)  that would otherwise have caused lines to be shown. By
                 default, this count is the same as the number  of  suppressed
                 lines, but if the -M (multiline) option is used (without -v),
                 there may  be  more  suppressed  lines  than  the  number  of
                 matches.

                 If  no lines are selected, the number zero is output. If sev-
                 eral files are are being scanned, a count is output for  each
                 of  them. However, if the --files-with-matches option is also
                 used, only those files whose counts are greater than zero are
                 listed.  When  -c  is  used,  the  -A, -B, and -C options are
                 ignored.

       --colour, --color
                 If this option is given without any data, it is equivalent to
                 "--colour=auto".   If  data  is required, it must be given in
                 the same shell item, separated by an equals sign.

       --colour=value, --color=value
                 This option specifies under what circumstances the parts of a
                 line that matched a pattern should be coloured in the output.
                 By default, the output is not coloured. The value  (which  is
                 optional,  see above) may be "never", "always", or "auto". In
                 the latter case, colouring happens only if the standard  out-
                 put  is connected to a terminal. More resources are used when
                 colouring is enabled, because pcre2grep has to search for all
                 possible  matches in a line, not just one, in order to colour
                 them all.

                 The colour that is used can be specified by setting the envi-
                 ronment  variable  PCRE2GREP_COLOUR  or  PCRE2GREP_COLOR. The
                 value of this variable should be a  string  of  two  numbers,
                 separated  by  a semicolon. They are copied directly into the
                 control string for setting colour on a  terminal,  so  it  is
                 your  responsibility  to ensure that they make sense. If nei-
                 ther of the environment variables  is  set,  the  default  is
                 "1;31", which gives red.

       -D action, --devices=action
                 If  an  input  path  is  not  a  regular file or a directory,
                 "action" specifies how it is to be  processed.  Valid  values
                 are "read" (the default) or "skip" (silently skip the path).

       -d action, --directories=action
                 If an input path is a directory, "action" specifies how it is
                 to be processed.  Valid values are  "read"  (the  default  in
                 non-Windows  environments,  for compatibility with GNU grep),
                 "recurse" (equivalent to the -r option), or "skip"  (silently
                 skip  the  path, the default in Windows environments). In the
                 "read" case, directories are read as if  they  were  ordinary
                 files.  In  some  operating  systems  the effect of reading a
                 directory like this is an immediate end-of-file; in others it
                 may provoke an error.

       -e pattern, --regex=pattern, --regexp=pattern
                 Specify a pattern to be matched. This option can be used mul-
                 tiple times in order to specify several patterns. It can also
                 be  used  as a way of specifying a single pattern that starts
                 with a hyphen. When -e is used, no argument pattern is  taken
                 from  the  command  line;  all  arguments are treated as file
                 names. There is no limit to the number of patterns. They  are
                 applied  to  each line in the order in which they are defined
                 until one matches.

                 If -f is used with -e, the command line patterns are  matched
                 first, followed by the patterns from the file(s), independent
                 of the order in which these options are specified. Note  that
                 multiple  use  of -e is not the same as a single pattern with
                 alternatives. For example, X|Y finds the first character in a
                 line  that  is  X or Y, whereas if the two patterns are given
                 separately, with X first, pcre2grep finds X if it is present,
                 even if it follows Y in the line. It finds Y only if there is
                 no X in the line. This matters only if you are  using  -o  or
                 --colo(u)r to show the part(s) of the line that matched.

       --exclude=pattern
                 Files (but not directories) whose names match the pattern are
                 skipped without being processed. This applies to  all  files,
                 whether  listed  on  the  command line, obtained from --file-
                 list, or by scanning a directory. The pattern is a PCRE2 reg-
                 ular  expression,  and is matched against the final component
                 of the file name, not the entire path. The  -F,  -w,  and  -x
                 options do not apply to this pattern. The option may be given
                 any number of times in order to specify multiple patterns. If
                 a  file  name matches both an --include and an --exclude pat-
                 tern, it is excluded. There is no short form for this option.

       --exclude-from=filename
                 Treat each non-empty line of the file  as  the  data  for  an
                 --exclude option. What constitutes a newline when reading the
                 file is the operating system's default. The --newline  option
                 has  no  effect on this option. This option may be given more
                 than once in order to specify a number of files to read.

       --exclude-dir=pattern
                 Directories whose names match the pattern are skipped without
                 being  processed,  whatever  the  setting  of the --recursive
                 option. This applies to all directories,  whether  listed  on
                 the command line, obtained from --file-list, or by scanning a
                 parent directory. The pattern is a PCRE2 regular  expression,
                 and  is  matched against the final component of the directory
                 name, not the entire path. The -F, -w, and -x options do  not
                 apply  to this pattern. The option may be given any number of
                 times in order to specify more than one pattern. If a  direc-
                 tory  matches  both  --include-dir  and  --exclude-dir, it is
                 excluded. There is no short form for this option.

       -F, --fixed-strings
                 Interpret each data-matching  pattern  as  a  list  of  fixed
                 strings,  separated  by  newlines,  instead  of  as a regular
                 expression. What constitutes a newline for  this  purpose  is
                 controlled  by the --newline option. The -w (match as a word)
                 and -x (match whole line) options can be used with -F.   They
                 apply to each of the fixed strings. A line is selected if any
                 of the fixed strings are found in it (subject to -w or -x, if
                 present).  This  option applies only to the patterns that are
                 matched against the contents of files; it does not  apply  to
                 patterns  specified  by  any  of  the  --include or --exclude
                 options.

       -f filename, --file=filename
                 Read patterns from the file, one per  line,  and  match  them
                 against  each  line of input. What constitutes a newline when
                 reading the file  is  the  operating  system's  default.  The
                 --newline option has no effect on this option. Trailing white
                 space is removed from each line, and blank lines are ignored.
                 An  empty  file  contains  no  patterns and therefore matches
                 nothing. See also the comments about multiple patterns versus
                 a  single  pattern with alternatives in the description of -e
                 above.

                 If this option is given more than  once,  all  the  specified
                 files  are read. A data line is output if any of the patterns
                 match it. A file name can be given as "-"  to  refer  to  the
                 standard  input.  When  -f is used, patterns specified on the
                 command line using -e may also be present;  they  are  tested
                 before  the  file's  patterns.  However,  no other pattern is
                 taken from the command line; all arguments are treated as the
                 names of paths to be searched.

       --file-list=filename
                 Read  a  list  of  files  and/or  directories  that are to be
                 scanned from the given file, one  per  line.  Trailing  white
                 space is removed from each line, and blank lines are ignored.
                 These paths are processed before any that are listed  on  the
                 command  line.  The file name can be given as "-" to refer to
                 the standard input.  If --file and --file-list are both spec-
                 ified  as  "-",  patterns are read first. This is useful only
                 when the standard input is a  terminal,  from  which  further
                 lines  (the  list  of files) can be read after an end-of-file
                 indication. If this option is given more than once,  all  the
                 specified files are read.

       --file-offsets
                 Instead  of  showing lines or parts of lines that match, show
                 each match as an offset from the start  of  the  file  and  a
                 length,  separated  by  a  comma. In this mode, no context is
                 shown. That is, the -A, -B, and -C options  are  ignored.  If
                 there is more than one match in a line, each of them is shown
                 separately. This option is mutually  exclusive  with  --line-
                 offsets and --only-matching.

       -H, --with-filename
                 Force  the  inclusion of the file name at the start of output
                 lines when searching a single file. By default, the file name
                 is not shown in this case.  For matching lines, the file name
                 is followed by a colon; for context lines, a hyphen separator
                 is  used.  If  a line number is also being output, it follows
                 the file name. When the -M option causes a pattern  to  match
                 more  than  one  line, only the first is preceded by the file
                 name.

       -h, --no-filename
                 Suppress the output file names when searching multiple files.
                 By  default,  file  names  are  shown when multiple files are
                 searched. For matching lines, the file name is followed by  a
                 colon;  for  context lines, a hyphen separator is used.  If a
                 line number is also being output, it follows the file name.

       --help    Output a help message, giving brief details  of  the  command
                 options  and  file type support, and then exit. Anything else
                 on the command line is ignored.

       -I        Ignore  binary  files.  This  is  equivalent   to   --binary-
                 files=without-match.

       -i, --ignore-case
                 Ignore upper/lower case distinctions during comparisons.

       --include=pattern
                 If  any --include patterns are specified, the only files that
                 are processed are those that match one of the  patterns  (and
                 do  not  match  an  --exclude  pattern). This option does not
                 affect directories, but it  applies  to  all  files,  whether
                 listed  on the command line, obtained from --file-list, or by
                 scanning a directory. The pattern is a PCRE2 regular  expres-
                 sion,  and is matched against the final component of the file
                 name, not the entire path. The -F, -w, and -x options do  not
                 apply  to this pattern. The option may be given any number of
                 times. If a file  name  matches  both  an  --include  and  an
                 --exclude  pattern,  it  is excluded.  There is no short form
                 for this option.

       --include-from=filename
                 Treat each non-empty line of the file  as  the  data  for  an
                 --include option. What constitutes a newline for this purpose
                 is the operating system's default. The --newline  option  has
                 no effect on this option. This option may be given any number
                 of times; all the files are read.

       --include-dir=pattern
                 If any --include-dir patterns are specified, the only  direc-
                 tories  that  are  processed  are those that match one of the
                 patterns (and do not match an  --exclude-dir  pattern).  This
                 applies  to  all  directories,  whether listed on the command
                 line, obtained from --file-list,  or  by  scanning  a  parent
                 directory.  The pattern is a PCRE2 regular expression, and is
                 matched against the final component of  the  directory  name,
                 not  the entire path. The -F, -w, and -x options do not apply
                 to this pattern. The option may be given any number of times.
                 If  a directory matches both --include-dir and --exclude-dir,
                 it is excluded. There is no short form for this option.

       -L, --files-without-match
                 Instead of outputting lines from the files, just  output  the
                 names  of  the files that do not contain any lines that would
                 have been output. Each file name is output once, on  a  sepa-
                 rate line.

       -l, --files-with-matches
                 Instead  of  outputting lines from the files, just output the
                 names of the files containing lines that would have been out-
                 put.  Each  file  name  is  output  once, on a separate line.
                 Searching normally stops as soon as a matching line is  found
                 in  a  file.  However, if the -c (count) option is also used,
                 matching continues in order to obtain the correct count,  and
                 those  files  that  have  at least one match are listed along
                 with their counts. Using this option with -c is a way of sup-
                 pressing the listing of files with no matches.

       --label=name
                 This option supplies a name to be used for the standard input
                 when file names are being output. If not supplied, "(standard
                 input)" is used. There is no short form for this option.

       --line-buffered
                 When  this  option is given, input is read and processed line
                 by line, and the output  is  flushed  after  each  write.  By
                 default,  input is read in large chunks, unless pcre2grep can
                 determine that it is reading from a terminal (which  is  cur-
                 rently  possible  only  in Unix-like environments). Output to
                 terminal is normally automatically flushed by  the  operating
                 system. This option can be useful when the input or output is
                 attached to a pipe and you do not want pcre2grep to buffer up
                 large  amounts  of data. However, its use will affect perfor-
                 mance, and the -M (multiline) option ceases to work.

       --line-offsets
                 Instead of showing lines or parts of lines that  match,  show
                 each match as a line number, the offset from the start of the
                 line, and a length. The line number is terminated by a  colon
                 (as  usual; see the -n option), and the offset and length are
                 separated by a comma. In this  mode,  no  context  is  shown.
                 That  is, the -A, -B, and -C options are ignored. If there is
                 more than one match in a line, each of them  is  shown  sepa-
                 rately. This option is mutually exclusive with --file-offsets
                 and --only-matching.

       --locale=locale-name
                 This option specifies a locale to be used for pattern  match-
                 ing.  It  overrides the value in the LC_ALL or LC_CTYPE envi-
                 ronment variables. If  no  locale  is  specified,  the  PCRE2
                 library's  default (usually the "C" locale) is used. There is
                 no short form for this option.

       --match-limit=number
                 Processing some regular expression  patterns  can  require  a
                 very  large amount of memory, leading in some cases to a pro-
                 gram crash if not enough is available.   Other  patterns  may
                 take  a  very  long  time to search for all possible matching
                 strings.  The  pcre2_match()  function  that  is  called   by
                 pcre2grep  to  do  the  matching  has two parameters that can
                 limit the resources that it uses.

                 The  --match-limit  option  provides  a  means  of   limiting
                 resource usage when processing patterns that are not going to
                 match, but which have a very large number of possibilities in
                 their  search  trees.  The  classic example is a pattern that
                 uses nested unlimited repeats. Internally, PCRE2 uses a func-
                 tion  called  match()  which  it  calls repeatedly (sometimes
                 recursively). The limit set by --match-limit  is  imposed  on
                 the  number  of times this function is called during a match,
                 which has the effect of limiting the amount  of  backtracking
                 that can take place.

                 The --recursion-limit option is similar to --match-limit, but
                 instead of limiting the total number of times that match() is
                 called, it limits the depth of recursive calls, which in turn
                 limits the amount of memory that can be used.  The  recursion
                 depth  is  a  smaller  number than the total number of calls,
                 because not all calls to match() are recursive. This limit is
                 of use only if it is set smaller than --match-limit.

                 There  are no short forms for these options. The default set-
                 tings are specified when the PCRE2 library is compiled,  with
                 the default default being 10 million.

       -M, --multiline
                 Allow  patterns to match more than one line. When this option
                 is given, patterns may usefully contain literal newline char-
                 acters  and  internal  occurrences of ^ and $ characters. The
                 output for a successful match may consist of  more  than  one
                 line.  The  first is the line in which the match started, and
                 the last is the line in which the match ended. If the matched
                 string  ends  with  a newline sequence the output ends at the
                 end of that line.

                 When this option is set, the PCRE2 library is called in "mul-
                 tiline"  mode.   However, pcre2grep still processes the input
                 line by line. The difference is that  a  matched  string  may
                 extend  past  the  end  of a line and continue on one or more
                 subsequent lines. The newline sequence  must  be  matched  as
                 part of the pattern. For example, to find the phrase "regular
                 expression" in a file where "regular" might be at the end  of
                 a  line  and  "expression" at the start of the next line, you
                 could use this command:

                   pcre2grep -M 'regular\s+expression' <file>

                 The \s escape sequence matches  any  white  space  character,
                 including  newlines,  and  is  followed  by  + so as to match
                 trailing white space on the first line as  well  as  possibly
                 handling a two-character newline sequence.

                 There  is a limit to the number of lines that can be matched,
                 imposed by the way that pcre2grep buffers the input  file  as
                 it  scans  it.  However,  pcre2grep  ensures that at least 8K
                 characters or the rest of the file (whichever is the shorter)
                 are  available for forward matching, and similarly the previ-
                 ous 8K characters (or all the previous characters,  if  fewer
                 than 8K) are guaranteed to be available for lookbehind asser-
                 tions. The -M option does not work when input is read line by
                 line (see --line-buffered.)

       -N newline-type, --newline=newline-type
                 The  PCRE2  library  supports  five different conventions for
                 indicating the ends of lines. They are  the  single-character
                 sequences  CR  (carriage  return) and LF (linefeed), the two-
                 character sequence CRLF, an "anycrlf" convention, which  rec-
                 ognizes  any  of the preceding three types, and an "any" con-
                 vention, in which any Unicode line ending sequence is assumed
                 to  end a line. The Unicode sequences are the three just men-
                 tioned, plus  VT  (vertical  tab,  U+000B),  FF  (form  feed,
                 U+000C),   NEL  (next  line,  U+0085),  LS  (line  separator,
                 U+2028), and PS (paragraph separator, U+2029).

                 When the  PCRE2  library  is  built,  a  default  line-ending
                 sequence   is  specified.   This  is  normally  the  standard
                 sequence for the operating system. Unless otherwise specified
                 by  this  option,  pcre2grep uses the library's default.  The
                 possible values for this option are CR, LF, CRLF, ANYCRLF, or
                 ANY.  This  makes  it possible to use pcre2grep to scan files
                 that have come from other environments without having to mod-
                 ify  their  line  endings.  If the data that is being scanned
                 does not agree  with  the  convention  set  by  this  option,
                 pcre2grep  may  behave in strange ways. Note that this option
                 does not apply to files specified by the -f,  --exclude-from,
                 or  --include-from  options,  which  are  expected to use the
                 operating system's standard newline sequence.

       -n, --line-number
                 Precede each output line by its line number in the file, fol-
                 lowed  by  a colon for matching lines or a hyphen for context
                 lines. If the file name is also being output, it precedes the
                 line  number.  When  the  -M option causes a pattern to match
                 more than one line, only the first is preceded  by  its  line
                 number. This option is forced if --line-offsets is used.

       --no-jit  If  the  PCRE2 library is built with support for just-in-time
                 compiling (which speeds up matching), pcre2grep automatically
                 makes use of this, unless it was explicitly disabled at build
                 time. This option can be used to disable the use  of  JIT  at
                 run  time. It is provided for testing and working round prob-
                 lems.  It should never be needed in normal use.

       -o, --only-matching
                 Show only the part of the line that matched a pattern instead
                 of  the  whole  line. In this mode, no context is shown. That
                 is, the -A, -B, and -C options are ignored. If there is  more
                 than  one  match in a line, each of them is shown separately.
                 If -o is combined with -v (invert the sense of the  match  to
                 find  non-matching  lines),  no  output is generated, but the
                 return code is set appropriately. If the matched  portion  of
                 the  line is empty, nothing is output unless the file name or
                 line number are being printed, in which case they  are  shown
                 on an otherwise empty line. This option is mutually exclusive
                 with --file-offsets and --line-offsets.

       -onumber, --only-matching=number
                 Show only the part of the line  that  matched  the  capturing
                 parentheses of the given number. Up to 32 capturing parenthe-
                 ses are supported, and -o0 is equivalent to -o without a num-
                 ber.  Because  these options can be given without an argument
                 (see above), if an argument is present, it must be  given  in
                 the  same  shell item, for example, -o3 or --only-matching=2.
                 The comments given for the non-argument case above also apply
                 to  this  case. If the specified capturing parentheses do not
                 exist in the pattern, or were not set in the  match,  nothing
                 is  output unless the file name or line number are being out-
                 put.

                 If this option is given multiple times,  multiple  substrings
                 are  output, in the order the options are given. For example,
                 -o3 -o1 -o3 causes the substrings matched by capturing paren-
                 theses  3  and  1  and then 3 again to be output. By default,
                 there is no separator (but see the next option).

       --om-separator=text
                 Specify a separating string for multiple occurrences  of  -o.
                 The  default is an empty string. Separating strings are never
                 coloured.

       -q, --quiet
                 Work quietly, that is, display nothing except error messages.
                 The  exit  status  indicates  whether or not any matches were
                 found.

       -r, --recursive
                 If any given path is a directory, recursively scan the  files
                 it  contains, taking note of any --include and --exclude set-
                 tings. By default, a directory is read as a normal  file;  in
                 some  operating  systems this gives an immediate end-of-file.
                 This option is a shorthand  for  setting  the  -d  option  to
                 "recurse".

       --recursion-limit=number
                 See --match-limit above.

       -s, --no-messages
                 Suppress  error  messages  about  non-existent  or unreadable
                 files. Such files are quietly skipped.  However,  the  return
                 code is still 2, even if matches were found in other files.

       -u, --utf-8
                 Operate in UTF-8 mode. This option is available only if PCRE2
                 has been compiled with UTF-8 support. All patterns (including
                 those  for  any --exclude and --include options) and all sub-
                 ject lines that are scanned must be valid  strings  of  UTF-8
                 characters.

       -V, --version
                 Write  the version numbers of pcre2grep and the PCRE2 library
                 to the standard output and then exit. Anything  else  on  the
                 command line is ignored.

       -v, --invert-match
                 Invert  the  sense  of  the match, so that lines which do not
                 match any of the patterns are the ones that are found.

       -w, --word-regex, --word-regexp
                 Force the patterns to match only whole words. This is equiva-
                 lent  to  having \b at the start and end of the pattern. This
                 option applies only to the patterns that are matched  against
                 the  contents  of files; it does not apply to patterns speci-
                 fied by any of the --include or --exclude options.

       -x, --line-regex, --line-regexp
                 Force the patterns to be anchored (each must  start  matching
                 at  the beginning of a line) and in addition, require them to
                 match entire lines. This is equivalent  to  having  ^  and  $
                 characters at the start and end of each alternative top-level
                 branch in every pattern. This option applies only to the pat-
                 terns that are matched against the contents of files; it does
                 not apply to patterns specified by any of  the  --include  or
                 --exclude options.


ENVIRONMENT VARIABLES

       The  environment  variables  LC_ALL  and LC_CTYPE are examined, in that
       order, for a locale. The first one that is set is  used.  This  can  be
       overridden  by  the  --locale  option.  If  no locale is set, the PCRE2
       library's default (usually the "C" locale) is used.


NEWLINES

       The -N (--newline) option allows pcre2grep to scan files with different
       newline conventions from the default. Any parts of the input files that
       are written to the standard output are copied identically,  with  what-
       ever  newline sequences they have in the input. However, the setting of
       this option does not affect the interpretation of  files  specified  by
       the -f, --exclude-from, or --include-from options, which are assumed to
       use the operating system's  standard  newline  sequence,  nor  does  it
       affect  the way in which pcre2grep writes informational messages to the
       standard error and output streams. For these it uses the string "\n" to
       indicate  newlines,  relying on the C I/O library to convert this to an
       appropriate sequence.


OPTIONS COMPATIBILITY

       Many of the short and long forms of pcre2grep's options are the same as
       in  the GNU grep program. Any long option of the form --xxx-regexp (GNU
       terminology) is also available as --xxx-regex (PCRE2 terminology). How-
       ever,  the  --file-list, --file-offsets, --include-dir, --line-offsets,
       --locale, --match-limit, -M, --multiline, -N,  --newline,  --om-separa-
       tor,  --recursion-limit,  -u,  and  --utf-8  options  are  specific  to
       pcre2grep, as is the use of the --only-matching option with a capturing
       parentheses number.

       Although  most  of the common options work the same way, a few are dif-
       ferent in pcre2grep. For example, the --include option's argument is  a
       glob  for GNU grep, but a regular expression for pcre2grep. If both the
       -c and -l options are given, GNU grep lists only  file  names,  without
       counts, but pcre2grep gives the counts as well.


OPTIONS WITH DATA

       There are four different ways in which an option with data can be spec-
       ified.  If a short form option is used, the  data  may  follow  immedi-
       ately, or (with one exception) in the next command line item. For exam-
       ple:

         -f/some/file
         -f /some/file

       The exception is the -o option, which may appear with or without  data.
       Because  of this, if data is present, it must follow immediately in the
       same item, for example -o3.

       If a long form option is used, the data may appear in the same  command
       line  item,  separated by an equals character, or (with two exceptions)
       it may appear in the next command line item. For example:

         --file=/some/file
         --file /some/file

       Note, however, that if you want to supply a file name beginning with  ~
       as  data  in  a  shell  command,  and have the shell expand ~ to a home
       directory, you must separate the file name from the option, because the
       shell does not treat ~ specially unless it is at the start of an item.

       The  exceptions  to the above are the --colour (or --color) and --only-
       matching options, for which the data  is  optional.  If  one  of  these
       options  does  have  data, it must be given in the first form, using an
       equals character. Otherwise pcre2grep will assume that it has no data.


MATCHING ERRORS

       It is possible to supply a regular expression that takes  a  very  long
       time  to  fail  to  match certain lines. Such patterns normally involve
       nested indefinite repeats, for example: (a+)*\d when matched against  a
       line  of  a's  with  no  final digit. The PCRE2 matching function has a
       resource limit that causes it to abort in these circumstances. If  this
       happens,  pcre2grep  outputs  an error message and the line that caused
       the problem to the standard error stream. If there  are  more  than  20
       such errors, pcre2grep gives up.

       The  --match-limit  option  of pcre2grep can be used to set the overall
       resource limit; there is a second option called --recursion-limit  that
       sets  a limit on the amount of memory (usually stack) that is used (see
       the discussion of these options above).


DIAGNOSTICS

       Exit status is 0 if any matches were found, 1 if no matches were found,
       and  2  for syntax errors, overlong lines, non-existent or inaccessible
       files (even if matches were found in other files) or too many  matching
       errors. Using the -s option to suppress error messages about inaccessi-
       ble files does not affect the return code.


SEE ALSO

       pcre2pattern(3), pcre2syntax(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 03 January 2015
       Copyright (c) 1997-2015 University of Cambridge.