pcre2/maint/ManyConfigTests

453 lines
14 KiB
Plaintext
Raw Normal View History

#! /bin/sh
# This is a script for the use of PCRE2 maintainers. It configures and rebuilds
# PCRE2 with a variety of configuration options, and in each case runs the
# tests to ensure that all goes well. Every possible combination would take far
# too long, so we use a representative sample. This script should be run in the
# PCRE2 source directory.
# While debugging, it is sometimes useful to be able to cut out some of the
# tests, in order to run those that are giving errors. The following options
# do this:
#
# -noasan skip the test that uses -fsanitize=address
# -nousan skip the test that uses -fsanitize=undefined
# -nodebug skip the test that uses --enable-debug
# -nojit skip all JIT tests
# -nojitmain skip non-valgrind JIT tests
# -nojitvalgrind skip JIT tests with valgrind
# -nomain skip all the main (non-JIT) set of tests
# -nomainvalgrind skip the main (non-JIT) valgrind tests
# -notmp skip the test in a temporary directory
# -novalgrind skip all the valgrind tests
# Alternatively, if any of those names are given with '+' instead of '-no',
# only those groups named with '+' are run (e.g. +jit). If -dummy is given,
# no tests are actually run - this provides a means of testing the selectors.
# The -v option causes a call to 'pcre2test -C' to happen for each
# configuration.
useasan=1
useusan=1
2015-06-03 19:03:37 +02:00
usedebug=1
usejit=1
usejitvalgrind=1
usemain=1
usemainvalgrind=1
usetmp=1
usevalgrind=1
dummy=0
seenplus=0
verbose=0
while [ $# -gt 0 ] ; do
case $1 in
+*) if [ $seenplus -eq 0 ]; then
useasan=0
useusan=0
usedebug=0
usejit=0
usejitvalgrind=0
usemain=0
usemainvalgrind=0
usetmp=0
seenplus=1
fi;;
esac
case $1 in
-dummy) dummy=1;;
-v) verbose=1;;
-noasan) useasan=0;;
-nousan) useusan=0;;
-nodebug) usedebug=0;;
-nojit) usejit=0; usejitvalgrind=0;;
-nojitmain) usejit=0;;
-nojitvalgrind) usejitvalgrind=0;;
-nomain) usemain=0; usemainvalgrind=0;;
-nomainvalgrind) usemainvalgrind=0;;
-notmp) usetmp=0;;
-novalgrind) usevalgrind=0;;
+asan) useasan=1;;
+usan) useusan=1;;
+debug) usedebug=1;;
+jit) usejit=1; usejitvalgrind=1;;
+jitmain) usejit=1;;
+jitvalgrind) usejitvalgrind=1;;
+main) usemain=1; usemainvalgrind=1;;
+mainvalgrind) usemainvalgrind=1;;
+tmp) usetmp=1;;
+valgrind) usevalgrind=1; usejitvalgrind=1; usemainvalgrind=1;;
*) echo "Unknown option '$1'"; exit 1;;
esac
shift
done
if [ $usejitvalgrind -eq 0 -a $usemainvalgrind -eq 0 ] ; then
usevalgrind=0
fi
# This is in case the caller has set aliases (as I do - PH)
unset cp ls mv rm
# This is a temporary directory for testing out-of-line builds
tmp=/tmp/pcre2testing
# Don't bother with compiler optimization for most tests; it just slows down
# compilation a lot (and running the tests themselves is quick). However, one
# special test turns optimization on, because it can provoke some compiler
# warnings.
CFLAGS="-g"
OFLAGS="-O0"
ISGCC=0
# If the compiler is gcc, add a lot of warning switches.
2014-11-18 19:32:12 +01:00
cc --version >/tmp/pcre2ccversion 2>/dev/null
if [ $? -eq 0 ] && grep GCC /tmp/pcre2ccversion >/dev/null; then
ISGCC=1
CFLAGS="$CFLAGS -Wall"
CFLAGS="$CFLAGS -Wno-overlength-strings"
CFLAGS="$CFLAGS -Wpointer-arith"
CFLAGS="$CFLAGS -Wwrite-strings"
CFLAGS="$CFLAGS -Wundef -Wshadow"
CFLAGS="$CFLAGS -Wmissing-field-initializers"
CFLAGS="$CFLAGS -Wunused-parameter"
CFLAGS="$CFLAGS -Wextra -Wformat"
CFLAGS="$CFLAGS -Wbad-function-cast"
CFLAGS="$CFLAGS -Wmissing-declarations"
CFLAGS="$CFLAGS -Wnested-externs"
CFLAGS="$CFLAGS -pedantic"
CFLAGS="$CFLAGS -Wuninitialized"
2017-08-12 18:22:52 +02:00
CFLAGS="$CFLAGS -Wmaybe-uninitialized"
CFLAGS="$CFLAGS -Wmissing-prototypes"
CFLAGS="$CFLAGS -Wstrict-prototypes"
fi
2014-11-18 19:32:12 +01:00
rm -f /tmp/pcre2ccversion
# This function runs a single test with the set of configuration options that
2014-10-16 18:22:44 +02:00
# are in $opts. The source directory must be set in srcdir. The function must
# be defined as "runtest()" not "function runtest()" in order to run on
2014-10-16 18:22:44 +02:00
# Solaris.
2014-10-16 18:22:44 +02:00
runtest()
{
rm -f $srcdir/pcre2test $srcdir/pcre2grep $srcdir/pcre2_jit_test
testcount=`expr $testcount + 1`
if [ "$opts" = "" ] ; then
echo "[$testcount/$testtotal] Configuring with: default settings"
else
echo "[$testcount/$testtotal] Configuring with:"
echo " $opts"
fi
if [ $dummy -eq 1 ]; then return; fi
CFLAGS="$CFLAGS" \
$srcdir/configure $opts >/dev/null 2>teststderrM
if [ $? -ne 0 ]; then
echo " "
echo "******** Error while configuring ********"
cat teststderrM
exit 1
fi
# There is an infelicity in the Autotools world (as of October 2015) which
# causes the message
#
# ar: `u' modifier ignored since `D' is the default (see `U')
2015-12-15 19:20:50 +01:00
#
# to be output while linking. This triggers an unwanted error report from this
# script, because it expects no stderr output while making. To get round this
# we filter the stderr output through sed, removing all occurrences of the
# above lines. Just for paranoia, check that sed is available before doing
# this.
2015-12-15 19:20:50 +01:00
echo "Making"
make -j >/dev/null 2>teststderrM
2015-12-15 19:20:50 +01:00
makeRC=$?
if command -v sed >/dev/null 2>&1 ; then
sed "/\`u' modifier ignored since \`D' is the default/ d" \
teststderrM > teststderrMM
2015-12-15 19:20:50 +01:00
mv -f teststderrMM teststderrM
fi
2015-10-27 17:15:25 +01:00
if [ $makeRC -ne 0 -o -s teststderrM ]; then
echo " "
echo "******** Errors or warnings while making ********"
echo " "
cat teststderrM
exit 1
fi
if [ $verbose -eq 1 ]; then
./pcre2test -C
fi
./pcre2test -C jit >/dev/null
jit=$?
./pcre2test -C pcre2-8 >/dev/null
pcre2_8=$?
echo "Running PCRE2 library tests $withvalgrind"
$srcdir/RunTest $valgrind >teststdoutM 2>teststderrM
if [ $? -ne 0 -o -s teststderrM ]; then
echo " "
echo "**** Test failed ****"
if [ -s teststderrM ] ; then
cat teststderrM
else
cat teststdoutM
fi
exit 1
fi
if [ $pcre2_8 -gt 0 ]; then
echo "Running pcre2grep tests $withvalgrind"
$srcdir/RunGrepTest $valgrind >teststdoutM 2>teststderrM
if [ $? -ne 0 -o -s teststderrM ]; then
echo " "
echo "**** Test failed ****"
cat teststderrM
cat teststdoutM
exit 1
fi
else
echo "Skipping pcre2grep tests: 8-bit library not compiled"
fi
2014-11-18 19:32:12 +01:00
if [ "$jit" -gt 0 ]; then
echo "Running JIT regression tests $withvalgrind"
$jrvalgrind $srcdir/pcre2_jit_test >teststdoutM 2>teststderrM
if [ $? -ne 0 -o -s teststderrM ]; then
echo " "
echo "**** Test failed ****"
cat teststderrM
cat teststdoutM
exit 1
fi
else
2014-11-18 19:32:12 +01:00
echo "Skipping JIT regression tests: JIT is not enabled"
fi
}
# Update the total count whenever a new test is added; it is used to show
# progess as each test is run.
testtotal=`expr 17 \* $usemain + \
1 \* $usemain \* $usedebug + \
1 \* $usetmp + \
1 \* $ISGCC \* $usemain + \
1 \* $ISGCC \* $usemain \* $useasan + \
1 \* $ISGCC \* $usemain \* $useusan + \
13 \* $usejit + \
2 \* $usemainvalgrind + \
2 \* $usejitvalgrind`
testcount=0
if [ $testtotal -eq 0 ] ; then
echo "** No tests selected"
exit 1
fi
valgrind=
jrvalgrind=
withvalgrind=
srcdir=.
export srcdir
if [ $usejit -ne 0 ]; then
enable_jit=--enable-jit
else
enable_jit=
fi
# If gcc is in use, run a maximally configured test with -O2, because that can
# throw up warnings that are not detected with -O0. Then run a second test with
# -fsanitize=address, which also may throw up new warnings as well as checking
# things at runtime. Finally, run another test using -fsanitize=undefined
# -std-gnu99 to check for runtime actions that are not well defined. However,
# we also use -fno-sanitize=shift to avoid warnings for shifts of negative
# numbers, which occur in src/pcre2_jit_compile.c.
if [ $ISGCC -ne 0 -a $usemain -ne 0 ]; then
echo "---------- Maximally configured test with -O2 ----------"
SAVECFLAGS="$CFLAGS"
CFLAGS="-O2 $CFLAGS"
echo "CFLAGS=$CFLAGS"
2014-11-03 19:27:56 +01:00
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
runtest
if [ $useasan -ne 0 ]; then
echo "---------- Maximally configured test with -fsanitize=address ----------"
2017-08-15 12:58:32 +02:00
# Following a kernel change, sanitize address doesn't work unless the extra
# PIE options are also set.
CFLAGS="$OFLAGS $SAVECFLAGS -no-pie -fno-PIE -fsanitize=address"
echo "CFLAGS=$CFLAGS"
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
runtest
fi
if [ $useusan -ne 0 ]; then
2015-07-02 15:18:14 +02:00
echo "------- Maximally configured test with -fsanitize=undefined -fno-sanitize=shift -fno-sanitize=alignment -std=gnu99 -------"
CFLAGS="$OFLAGS $SAVECFLAGS -fsanitize=undefined -fno-sanitize=shift -fno-sanitize=alignment -std=gnu99"
echo "CFLAGS=$CFLAGS"
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32"
runtest
fi
CFLAGS="$OFLAGS $SAVECFLAGS"
fi
# This set of tests builds PCRE2 and runs the tests with a variety of configure
# options, in the current (source) directory. The empty configuration builds
# with all the default settings. As well as testing that these options work, we
# use --disable-shared or --disable-static except for the default test (which
# builds both) to save a bit of time by building only one version of the
# library for the subsequent tests.
echo "---------- CFLAGS for the remaining tests ----------"
echo "CFLAGS=$CFLAGS"
if [ $usemain -ne 0 ]; then
if [ $usedebug -ne 0 ]; then
echo "---------- Maximally configured test with --enable-debug ----------"
opts="--disable-shared $enable_jit --enable-pcre2-16 --enable-pcre2-32 --enable-debug"
runtest
fi
2015-04-24 13:14:47 +02:00
echo "---------- Non-JIT tests in the current directory ----------"
for opts in \
"" \
2014-11-03 19:27:56 +01:00
"--disable-static" \
"--disable-shared" \
"--disable-unicode --disable-shared --enable-never-backslash-C" \
2016-04-01 17:52:08 +02:00
"--with-link-size=3 --disable-shared --disable-pcre2grep-callout" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-rebuild-chartables --disable-shared" \
"--disable-unicode --enable-newline-is-any --disable-shared" \
"--disable-unicode --enable-newline-is-cr --disable-shared" \
"--disable-unicode --enable-newline-is-crlf --disable-shared" \
"--disable-unicode --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared" \
"--enable-newline-is-any --disable-static" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-pcre2-16" \
"--enable-pcre2-16 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-pcre2-32" \
"--enable-pcre2-32 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-shared" \
"--disable-unicode --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --disable-shared"
do
runtest
done
fi
# Now run the JIT tests unless disabled
if [ $usejit -ne 0 ]; then
echo "---------- JIT tests in the current directory ----------"
for opts in \
2014-11-03 19:27:56 +01:00
"--disable-unicode --enable-jit --disable-shared" \
"--enable-jit --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --with-link-size=3 --disable-shared" \
"--enable-jit --enable-pcre2-16 --disable-shared" \
"--disable-unicode --enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
"--enable-jit --enable-pcre2-16 --disable-pcre2-8 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --enable-pcre2-16 --with-link-size=3 --disable-shared" \
"--enable-jit --enable-pcre2-16 --with-link-size=4 --disable-shared" \
"--enable-jit --enable-pcre2-32 --disable-shared" \
"--disable-unicode --enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
"--enable-jit --enable-pcre2-32 --disable-pcre2-8 --disable-shared" \
2014-11-03 19:27:56 +01:00
"--enable-jit --enable-pcre2-32 --with-link-size=4 --disable-shared" \
"--enable-jit --enable-pcre2-32 --enable-pcre2-16 --disable-pcre2-8 --enable-newline-is-anycrlf --enable-bsr-anycrlf --disable-shared"
do
runtest
done
fi
# Now re-run some of the tests under valgrind.
if [ $usevalgrind -ne 0 ]; then
echo "---------- Tests in the current directory using valgrind ----------"
valgrind=valgrind
withvalgrind="with valgrind"
if [ $usemainvalgrind -ne 0 ]; then
for opts in \
"--disable-shared" \
"--with-link-size=3 --enable-pcre2-16 --enable-pcre2-32 --disable-shared"
do
opts="--enable-valgrind $opts"
runtest
done
fi
if [ $usejitvalgrind -ne 0 ]; then
jrvalgrind="valgrind --tool=memcheck -q --smc-check=all-non-file --suppressions=$srcdir/testdata/valgrind-jit.supp"
for opts in \
2014-11-03 19:27:56 +01:00
"--enable-jit --disable-shared" \
"--enable-jit --enable-pcre2-16 --enable-pcre2-32"
do
opts="--enable-valgrind $opts"
runtest
done
fi
fi
valgrind=
jrvalgrind=
withvalgrind=
# Clean up the distribution and then do at least one build and test in a
# directory other than the source directory. It doesn't work unless the
# source directory is cleaned up first.
if [ -f Makefile ]; then
echo "Running 'make distclean'"
make distclean >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "** 'make distclean' failed"
exit 1
fi
fi
2015-12-15 19:20:50 +01:00
echo "---------- End of tests in the source directory ----------"
echo "Removing teststdoutM and teststderrM"
rm -rf teststdoutM teststderrM
if [ $usetmp -ne 0 ]; then
echo "---------- Tests in the $tmp directory ----------"
srcdir=`pwd`
export srcdir
if [ ! -e $tmp ]; then
mkdir $tmp
fi
if [ ! -d $tmp ]; then
echo "** Failed to create $tmp or it is not a directory"
exit 1
fi
cd $tmp
if [ $? -ne 0 ]; then
echo "** Failed to cd to $tmp"
exit 1
fi
for opts in \
2014-11-03 19:27:56 +01:00
"--disable-shared"
do
runtest
done
2015-12-15 19:20:50 +01:00
echo "Removing $tmp"
rm -rf $tmp
fi
2015-12-15 19:20:50 +01:00
echo "---------- All done ----------"
# End