pcre2/doc/pcre2test.txt

PCRE2TEST(1)                General Commands Manual               PCRE2TEST(1)



NAME
       pcre2test - a program for testing Perl-compatible regular expressions.

SYNOPSIS

       pcre2test [options] [input file [output file]]

       pcre2test is a test program for the PCRE2 regular expression libraries,
       but it can also be used for  experimenting  with  regular  expressions.
       This  document  describes the features of the test program; for details
       of the regular expressions themselves, see the pcre2pattern  documenta-
       tion.  For  details  of  the  PCRE2  library  function  calls and their
       options, see the pcre2api documentation.

       The input for pcre2test is a sequence of  regular  expression  patterns
       and  subject strings to be matched. The output shows the result of each
       match attempt. Modifiers on the command line,  the  patterns,  and  the
       subject  lines  specify PCRE2 function options, control how the subject
       is processed, and what output is produced.

       As the original fairly simple PCRE library evolved,  it  acquired  many
       different  features,  and  as  a  result, the original pcretest program
       ended up with a lot of options in a messy, arcane syntax,  for  testing
       all the features. The move to the new PCRE2 API provided an opportunity
       to re-implement the test program as pcre2test, with a cleaner  modifier
       syntax.  Nevertheless,  there are still many obscure modifiers, some of
       which are specifically designed for use in conjunction  with  the  test
       script  and  data  files that are distributed as part of PCRE2. All the
       modifiers are documented here, some  without  much  justification,  but
       many  of  them  are  unlikely  to  be  of  use  except when testing the
       libraries.


PCRE2's 8-BIT, 16-BIT AND 32-BIT LIBRARIES

       Different versions of the PCRE2 library can be built to support charac-
       ter  strings  that  are encoded in 8-bit, 16-bit, or 32-bit code units.
       One, two, or  all  three  of  these  libraries  may  be  simultaneously
       installed. The pcre2test program can be used to test all the libraries.
       However, its own input and output are  always  in  8-bit  format.  When
       testing  the  16-bit  or 32-bit libraries, patterns and subject strings
       are converted to 16- or  32-bit  format  before  being  passed  to  the
       library  functions.  Results are converted back to 8-bit code units for
       output.

       In the rest of this document, the names of library functions and struc-
       tures  are  given  in  generic  form,  for example, pcre_compile(). The
       actual names used in the libraries have a suffix _8, _16,  or  _32,  as
       appropriate.


INPUT ENCODING

       Input  to  pcre2test is processed line by line, either by calling the C
       library's fgets() function, or via the libreadline library (see below).
       In  Unix-like environments, fgets() treats any bytes other than newline
       as data characters. However, in some Windows environments character  26
       (hex  1A) causes an immediate end of file, and no further data is read.
       For maximum portability, therefore, it is safest to avoid  non-printing
       characters in pcre2test input files.


COMMAND LINE OPTIONS

       -8        If the 8-bit library has been built, this option causes it to
                 be used (this is the default). If the 8-bit library  has  not
                 been built, this option causes an error.

       -16       If  the  16-bit library has been built, this option causes it
                 to be used. If only the 16-bit library has been  built,  this
                 is  the  default.  If  the 16-bit library has not been built,
                 this option causes an error.

       -32       If the 32-bit library has been built, this option  causes  it
                 to  be  used. If only the 32-bit library has been built, this
                 is the default. If the 32-bit library  has  not  been  built,
                 this option causes an error.

       -b        Behave  as if each pattern has the /fullbincode modifier; the
                 full internal binary form of the pattern is output after com-
                 pilation.

       -C        Output  the  version  number  of  the  PCRE2 library, and all
                 available information about the optional  features  that  are
                 included,  and  then  exit  with  zero  exit  code. All other
                 options are ignored.

       -C option Output information about a specific build-time  option,  then
                 exit.  This functionality is intended for use in scripts such
                 as RunTest. The following options output the  value  and  set
                 the exit code as indicated:

                   ebcdic-nl  the code for LF (= NL) in an EBCDIC environment:
                                0x15 or 0x25
                                0 if used in an ASCII environment
                                exit code is always 0
                   linksize   the configured internal link size (2, 3, or 4)
                                exit code is set to the link size
                   newline    the default newline setting:
                                CR, LF, CRLF, ANYCRLF, or ANY
                                exit code is always 0
                   bsr        the default setting for what \R matches:
                                ANYCRLF or ANY
                                exit code is always 0

                 The  following  options output 1 for true or 0 for false, and
                 set the exit code to the same value:

                   ebcdic     compiled for an EBCDIC environment
                   jit        just-in-time support is available
                   pcre2-16   the 16-bit library was built
                   pcre2-32   the 32-bit library was built
                   pcre2-8    the 8-bit library was built
                   unicode    Unicode support is available

                 If an unknown option is given, an error  message  is  output;
                 the exit code is 0.

       -d        Behave  as if each pattern has the debug modifier; the inter-
                 nal form and information about the compiled pattern is output
                 after compilation; -d is equivalent to -b -i.

       -dfa      Behave as if each subject line has the dfa modifier; matching
                 is done using the pcre2_dfa_match() function instead  of  the
                 default pcre2_match().

       -help     Output a brief summary these options and then exit.

       -i        Behave as if each pattern has the /info modifier; information
                 about the compiled pattern is given after compilation.

       -jit      Behave as if each pattern line has the  jit  modifier;  after
                 successful  compilation,  each pattern is passed to the just-
                 in-time compiler, if available.

       -pattern modifier-list
                 Behave as if each pattern line contains the given modifiers.

       -q        Do not output the version number of pcre2test at the start of
                 execution.

       -S size   On  Unix-like  systems, set the size of the run-time stack to
                 size megabytes.

       -subject modifier-list
                 Behave as if each subject line contains the given modifiers.

       -t        Run each compile and match many times with a timer, and  out-
                 put  the  resulting  times  per compile or match. When JIT is
                 used, separate times are given for the  initial  compile  and
                 the  JIT  compile.  You  can control the number of iterations
                 that are used for timing by following -t with a number (as  a
                 separate  item  on  the command line). For example, "-t 1000"
                 iterates 1000 times. The default is to iterate 500,000 times.

       -tm       This is like -t except that it times only the matching phase,
                 not the compile phase.

       -T -TM    These  behave like -t and -tm, but in addition, at the end of
                 a run, the total times for all compiles and matches are  out-
                 put.

       -version  Output the PCRE2 version number and then exit.


DESCRIPTION

       If  pcre2test  is given two filename arguments, it reads from the first
       and writes to the second. If the first name is "-", input is taken from
       the  standard  input. If pcre2test is given only one argument, it reads
       from that file and writes to stdout. Otherwise, it reads from stdin and
       writes  to  stdout.  When  the input is a terminal, it prompts for each
       line of input, using "re>" to prompt for regular  expression  patterns,
       and "data>" to prompt for subject lines.

       When  pcre2test  is  built,  a configuration option can specify that it
       should be linked with the libreadline or libedit library. When this  is
       done,  if the input is from a terminal, it is read using the readline()
       function. This provides line-editing and history facilities. The output
       from the -help option states whether or not readline() will be used.

       The  program  handles  any number of tests, each of which consists of a
       set of input lines. Each set starts with a regular expression  pattern,
       followed by any number of subject lines to be matched against that pat-
       tern. In between sets of test data, command lines  that  begin  with  a
       hash  (#)  character  may  appear. This file format, with some restric-
       tions, can also be processed by the perltest.sh script that is distrib-
       uted  with PCRE2 as a means of checking that the behaviour of PCRE2 and
       Perl is the same.

       Each subject line is matched separately and independently. If you  want
       to do multi-line matches, you have to use the \n escape sequence (or \r
       or \r\n, etc., depending on the newline setting) in a  single  line  of
       input  to encode the newline sequences. There is no limit on the length
       of subject lines; the input buffer is automatically extended if  it  is
       too  small.  There  is  a replication feature that makes it possible to
       generate long subject lines without having to supply them explicitly.

       An empty line or the end of the file signals the  end  of  the  subject
       lines  for  a  test,  at  which  point a new pattern or command line is
       expected if there is still input to be read.


COMMAND LINES

       In between sets of test data, a line that begins with a hash (#)  char-
       acter  is interpreted as a command line. If the first character is fol-
       lowed by white space or an exclamation mark, the line is treated  as  a
       comment,  and  ignored.   Otherwise,  the following commands are recog-
       nized:

         #forbid_utf

       Subsequent  patterns  automatically  have   the   PCRE2_NEVER_UTF   and
       PCRE2_NEVER_UCP options set, which locks out the use of UTF and Unicode
       property features. This is a trigger guard that is used in  test  files
       to  ensure  that  UTF/Unicode tests are not accidentally added to files
       that are used when UTF support is not included  in  the  library.  This
       effect  can  also be obtained by the use of #pattern; the difference is
       that #forbid_utf cannot be unset, and the  automatic  options  are  not
       displayed in pattern information, to avoid cluttering up test output.

         #pattern <modifier-list>

       This  command  sets  a default modifier list that applies to all subse-
       quent patterns. Modifiers on a pattern can change these settings.

         #perltest

       The appearance of this line causes all subsequent modifier settings  to
       be checked for compatibility with the perltest.sh script, which is used
       to confirm that Perl gives the same results as PCRE2. Also, apart  from
       comment  lines,  none of the other command lines are permitted, because
       they and many of the modifiers are specific to  pcre2test,  and  should
       not  be  used in test files that are also processed by perltest.sh. The
       #perltest command helps detect tests that are accidentally put  in  the
       wrong file.

         #subject <modifier-list>

       This  command  sets  a default modifier list that applies to all subse-
       quent subject lines. Modifiers on a subject line can change these  set-
       tings.


MODIFIER SYNTAX

       Modifier lists are used with both pattern and subject lines. Items in a
       list are separated by commas and optional white space.  Some  modifiers
       may  be  given  for both patterns and subject lines, whereas others are
       valid for one or the other only. Each modifier has  a  long  name,  for
       example "anchored", and some of them must be followed by an equals sign
       and a value, for example, "offset=12".  Modifiers that do not take val-
       ues may be preceded by a minus sign to turn off a previous setting.

       A few of the more common modifiers can also be specified as single let-
       ters, for example "i" for "caseless". In documentation,  following  the
       Perl convention, these are written with a slash ("the /i modifier") for
       clarity. Abbreviated modifiers must all be concatenated  in  the  first
       item  of a modifier list. If the first item is not recognized as a long
       modifier name, it is interpreted as a sequence of these  abbreviations.
       For example:

         /abc/ig,newline=cr,jit=3

       This  is  a pattern line whose modifier list starts with two one-letter
       modifiers (/i and /g). The lower-case  abbreviated  modifiers  are  the
       same as used in Perl.


PATTERN SYNTAX

       A  pattern line must start with one of the following characters (common
       symbols, excluding pattern meta-characters):

         / ! " ' ` - = _ : ; , % & @ ~

       This is interpreted as the pattern's delimiter.  A  regular  expression
       may  be  continued  over several input lines, in which case the newline
       characters are included within it. It is possible to include the delim-
       iter within the pattern by escaping it with a backslash, for example

         /abc\/def/

       If  you do this, the escape and the delimiter form part of the pattern,
       but since the delimiters are all non-alphanumeric, this does not affect
       its  interpretation.  If  the terminating delimiter is immediately fol-
       lowed by a backslash, for example,

         /abc/\

       then a backslash is added to the end of the pattern. This  is  done  to
       provide  a  way of testing the error condition that arises if a pattern
       finishes with a backslash, because

         /abc\/

       is interpreted as the first line of a pattern that starts with  "abc/",
       causing  pcre2test to read the next line as a continuation of the regu-
       lar expression.

       A pattern can be followed by a modifier list (details below).


SUBJECT LINE SYNTAX

       Before   each   subject   line   is   passed   to   pcre2_match()    or
       pcre2_dfa_match(), leading and trailing white space is removed, and the
       line is scanned for backslash escapes. The following provide a means of
       encoding non-printing characters in a visible way:

         \a         alarm (BEL, \x07)
         \b         backspace (\x08)
         \e         escape (\x27)
         \f         form feed (\x0c)
         \n         newline (\x0a)
         \r         carriage return (\x0d)
         \t         tab (\x09)
         \v         vertical tab (\x0b)
         \nnn       octal character (up to 3 octal digits); always
                      a byte unless > 255 in UTF-8 or 16-bit or 32-bit mode
         \o{dd...}  octal character (any number of octal digits}
         \xhh       hexadecimal byte (up to 2 hex digits)
         \x{hh...}  hexadecimal character (any number of hex digits)

       The use of \x{hh...} is not dependent on the use of the utf modifier on
       the pattern. It is recognized always. There may be any number of  hexa-
       decimal  digits  inside  the  braces; invalid values provoke error mes-
       sages.

       Note that \xhh specifies one byte rather than one  character  in  UTF-8
       mode;  this  makes it possible to construct invalid UTF-8 sequences for
       testing purposes. On the other hand, \x{hh} is interpreted as  a  UTF-8
       character  in UTF-8 mode, generating more than one byte if the value is
       greater than 127.  When testing the 8-bit library not  in  UTF-8  mode,
       \x{hh} generates one byte for values less than 256, and causes an error
       for greater values.

       In UTF-16 mode, all 4-digit \x{hhhh} values are accepted. This makes it
       possible to construct invalid UTF-16 sequences for testing purposes.

       In  UTF-32  mode,  all  4- to 8-digit \x{...} values are accepted. This
       makes it possible to construct invalid  UTF-32  sequences  for  testing
       purposes.

       There is a special backslash sequence that specifies replication of one
       or more characters:

         \[<characters>]{<count>}

       This makes it possible to test long strings without having  to  provide
       them as part of the file. For example:

         \[abc]{4}

       is  converted to "abcabcabcabc". This feature does not support nesting.
       To include a closing square bracket in the characters, code it as \x5D.

       A backslash followed by an equals sign marks the  end  of  the  subject
       string and the start of a modifier list. For example:

         abc\=notbol,notempty

       A  backslash  followed  by  any  other  non-alphanumeric character just
       escapes that character. A backslash followed by anything else causes an
       error.  However,  if the very last character in the line is a backslash
       (and there is no modifier list), it is ignored. This  gives  a  way  of
       passing  an  empty line as data, since a real empty line terminates the
       data input.


PATTERN MODIFIERS

       There are three types of modifier that can appear in pattern lines, two
       of  which  may also be used in a #pattern command. A pattern's modifier
       list can add to or override default modifiers that were set by a previ-
       ous #pattern command.

   Setting compilation options

       The  following modifiers set options for pcre2_compile(). The most com-
       mon ones have single-letter abbreviations. See pcreapi for  a  descrip-
       tion of their effects.

             allow_empty_class         set PCRE2_ALLOW_EMPTY_CLASS
             alt_bsux                  set PCRE2_ALT_BSUX
             anchored                  set PCRE2_ANCHORED
             auto_callout              set PCRE2_AUTO_CALLOUT
         /i  caseless                  set PCRE2_CASELESS
             dollar_endonly            set PCRE2_DOLLAR_ENDONLY
         /s  dotall                    set PCRE2_DOTALL
             dupnames                  set PCRE2_DUPNAMES
         /x  extended                  set PCRE2_EXTENDED
             firstline                 set PCRE2_FIRSTLINE
             match_unset_backref       set PCRE2_MATCH_UNSET_BACKREF
         /m  multiline                 set PCRE2_MULTILINE
             never_ucp                 set PCRE2_NEVER_UCP
             never_utf                 set PCRE2_NEVER_UTF
             no_auto_capture           set PCRE2_NO_AUTO_CAPTURE
             no_auto_possess           set PCRE2_NO_AUTO_POSSESS
             no_start_optimize         set PCRE2_NO_START_OPTIMIZE
             no_utf_check              set PCRE2_NO_UTF_CHECK
             ucp                       set PCRE2_UCP
             ungreedy                  set PCRE2_UNGREEDY
             utf                       set PCRE2_UTF

       As well as turning on the PCRE2_UTF option, the utf modifier causes all
       non-printing characters in output  strings  to  be  printed  using  the
       \x{hh...}  notation. Otherwise, those less than 0x100 are output in hex
       without the curly brackets.

   Setting compilation controls

       The following modifiers  affect  the  compilation  process  or  request
       information about the pattern:

             bsr=[anycrlf|unicode]     specify \R handling
         /B  bincode                   show binary code without lengths
             debug                     same as info,fullbincode
             fullbincode               show binary code with lengths
         /I  info                      show info about compiled pattern
             hex                       pattern is coded in hexadecimal
             jit[=<number>]            use JIT
             jitfast                   use JIT fast path
             jitverify                 verify JIT use
             locale=<name>             use this locale
             memory                    show memory used
             newline=<type>            set newline type
             parens_nest_limit=<n>     set maximum parentheses depth
             perlcompat                lock out non-Perl modifiers
             posix                     use the POSIX API
             stackguard=<number>       test the stackguard feature
             tables=[0|1|2]            select internal tables

       The effects of these modifiers are described in the following sections.

   Newline and \R handling

       The  bsr modifier specifies what \R in a pattern should match. If it is
       set to "anycrlf", \R matches CR, LF, or CRLF only.  If  it  is  set  to
       "unicode",  \R  matches  any  Unicode  newline sequence. The default is
       specified when PCRE2 is built, with the default default being Unicode.

       The newline modifier specifies which characters are to  be  interpreted
       as newlines, both in the pattern and in subject lines. The type must be
       one of CR, LF, CRLF, ANYCRLF, or ANY (in upper or lower case).

   Information about a pattern

       The debug modifier is a shorthand for info,fullbincode, requesting  all
       available information.

       The bincode modifier causes a representation of the compiled code to be
       output after compilation. This information does not contain length  and
       offset values, which ensures that the same output is generated for dif-
       ferent internal link sizes and different code  unit  widths.  By  using
       bincode,  the  same  regression tests can be used in different environ-
       ments.

       The fullbincode modifier, by contrast, does include length  and  offset
       values.  This is used in a few special tests that run only for specific
       code unit widths and link sizes, and is also useful for one-off tests.

       The info modifier  requests  information  about  the  compiled  pattern
       (whether  it  is anchored, has a fixed first character, and so on). The
       information is obtained from the  pcre2_pattern_info()  function.  Here
       are some typical examples:

           re> /(?i)(^a|^b)/m,info
         Capturing subpattern count = 1
         Compile options: multiline
         Overall options: caseless multiline
         First code unit at start or follows newline
         Subject length lower bound = 1

           re> /(?i)abc/info
         Capturing subpattern count = 0
         Compile options: <none>
         Overall options: caseless
         First code unit = 'a' (caseless)
         Last code unit = 'c' (caseless)
         Subject length lower bound = 3

       "Compile  options"  are those specified by modifiers; "overall options"
       have added options that are taken or deduced from the pattern. If  both
       sets  of  options are the same, just a single "options" line is output;
       if there are no options, the line is  omitted.  "First  code  unit"  is
       where  any  match must start; if there is more than one they are listed
       as "starting code units". "Last code unit" is  the  last  literal  code
       unit  that  must  be  present in any match. This is not necessarily the
       last character. These lines are omitted if no starting or  ending  code
       units are recorded.

   Specifying a pattern in hex

       The hex modifier specifies that the characters of the pattern are to be
       interpreted as pairs of hexadecimal digits. White  space  is  permitted
       between pairs. For example:

         /ab 32 59/hex

       This  feature  is  provided  as a way of creating patterns that contain
       binary zero and other non-printing characters.  By  default,  pcre2test
       passes  patterns  as zero-terminated strings to pcre2_compile(), giving
       the length as PCRE2_ZERO_TERMINATED. However, for patterns specified in
       hexadecimal, the actual length of the pattern is passed.

   JIT compilation

       The  /jit  modifier  may optionally be followed by an equals sign and a
       number in the range 0 to 7:

         0  disable JIT
         1  use JIT for normal match only
         2  use JIT for soft partial match only
         3  use JIT for normal match and soft partial match
         4  use JIT for hard partial match only
         6  use JIT for soft and hard partial match
         7  all three modes

       If no number is given, 7 is assumed. If JIT compilation is  successful,
       the  compiled JIT code will automatically be used when pcre2_match() is
       run for the appropriate type of match, except  when  incompatible  run-
       time options are specified. For more details, see the pcre2jit documen-
       tation. See also the jitstack modifier below for a way of  setting  the
       size of the JIT stack.

       If  the  jitfast  modifier is specified, matching is done using the JIT
       "fast path" interface, pcre2_jit_match(), which skips some of the  san-
       ity  checks that are done by pcre2_match(), and of course does not work
       when JIT is not supported. If jitfast is specified without  jit,  jit=7
       is assumed.

       If  the jitverify modifier is specified, information about the compiled
       pattern shows whether JIT compilation was or  was  not  successful.  If
       jitverify  is  specified without jit, jit=7 is assumed. If JIT compila-
       tion is successful when jitverify is set, the text "(JIT)" is added  to
       the first output line after a match or non match when JIT-compiled code
       was actually used in the match.

   Setting a locale

       The /locale modifier must specify the name of a locale, for example:

         /pattern/locale=fr_FR

       The given locale is set, pcre2_maketables() is called to build a set of
       character  tables for the locale, and this is then passed to pcre2_com-
       pile() when compiling the regular expression. The same tables are  used
       when matching the following subject lines. The /locale modifier applies
       only to the pattern on which it appears, but can be given in a #pattern
       command  if a default is needed. Setting a locale and alternate charac-
       ter tables are mutually exclusive.

   Showing pattern memory

       The /memory modifier causes the size in bytes of  the  memory  used  to
       hold  the compiled pattern to be output. This does not include the size
       of the pcre2_code block; it is just the actual compiled  data.  If  the
       pattern is subsequently passed to the JIT compiler, the size of the JIT
       compiled code is also output. Here is an example:

           re> /a(b)c/jit,memory
         Memory allocation (code space): 21
         Memory allocation (JIT code): 1910


   Limiting nested parentheses

       The parens_nest_limit modifier sets a limit  on  the  depth  of  nested
       parentheses  in  a  pattern.  Breaching  the limit causes a compilation
       error.  The default for the library is set when  PCRE2  is  built,  but
       pcre2test  sets  its  own default of 220, which is required for running
       the standard test suite.

   Using the POSIX wrapper API

       The /posix modifier causes pcre2test to call PCRE2 via the POSIX  wrap-
       per  API  rather  than  its  native  API.  This supports only the 8-bit
       library.  When the POSIX API is being used, the following pattern modi-
       fiers set options for the regcomp() function:

         caseless           REG_ICASE
         multiline          REG_NEWLINE
         no_auto_capture    REG_NOSUB
         dotall             REG_DOTALL     )
         ungreedy           REG_UNGREEDY   ) These options are not part of
         ucp                REG_UCP        )   the POSIX standard
         utf                REG_UTF8       )

       The  aftertext  and  allaftertext  subject  modifiers work as described
       below. All other modifiers cause an error.

   Testing the stack guard feature

       The /stackguard modifier is used to  test  the  use  of  pcre2_set_com-
       pile_recursion_guard(),  a  function  that  is provided to enable stack
       availability to be checked during compilation (see the  pcre2api  docu-
       mentation  for  details).  If  the  number specified by the modifier is
       greater than zero, pcre2_set_compile_recursion_guard() is called to set
       up  callback  from pcre2_compile() to a local function. The argument it
       receives is the current nesting parenthesis depth; if this  is  greater
       than the value given by the modifier, non-zero is returned, causing the
       compilation to be aborted.

   Using alternative character tables

       The value specified for the /tables modifier must be one of the  digits
       0, 1, or 2. It causes a specific set of built-in character tables to be
       passed to pcre2_compile(). This is used in the PCRE2 tests to check be-
       haviour with different character tables. The digit specifies the tables
       as follows:

         0   do not pass any special character tables
         1   the default ASCII tables, as distributed in
               pcre2_chartables.c.dist
         2   a set of tables defining ISO 8859 characters

       In table 2, some characters whose codes are greater than 128 are  iden-
       tified  as  letters,  digits,  spaces, etc. Setting alternate character
       tables and a locale are mutually exclusive.

   Setting certain match controls

       The following modifiers are really subject modifiers, and are described
       below.   However, they may be included in a pattern's modifier list, in
       which case they are applied to every subject  line  that  is  processed
       with that pattern. They do not affect the compilation process.

             aftertext           show text after match
             allaftertext        show text after captures
             allcaptures         show all captures
             allusedtext         show all consulted text
         /g  global              global matching
             mark                show mark values
             replace=<string>    specify a replacement string
             startchar           show starting character when relevant

       These  modifiers may not appear in a #pattern command. If you want them
       as defaults, set them in a #subject command.


SUBJECT MODIFIERS

       The modifiers that can appear in subject lines and the #subject command
       are of two types.

   Setting match options

       The    following   modifiers   set   options   for   pcre2_match()   or
       pcre2_dfa_match(). See pcreapi for a description of their effects.

             anchored                  set PCRE2_ANCHORED
             dfa_restart               set PCRE2_DFA_RESTART
             dfa_shortest              set PCRE2_DFA_SHORTEST
             no_utf_check              set PCRE2_NO_UTF_CHECK
             notbol                    set PCRE2_NOTBOL
             notempty                  set PCRE2_NOTEMPTY
             notempty_atstart          set PCRE2_NOTEMPTY_ATSTART
             noteol                    set PCRE2_NOTEOL
             partial_hard (or ph)      set PCRE2_PARTIAL_HARD
             partial_soft (or ps)      set PCRE2_PARTIAL_SOFT

       The partial matching modifiers are provided with abbreviations  because
       they appear frequently in tests.

       If  the  /posix  modifier was present on the pattern, causing the POSIX
       wrapper API to be used, the only option-setting modifiers that have any
       effect   are   notbol,   notempty,   and  noteol,  causing  REG_NOTBOL,
       REG_NOTEMPTY, and REG_NOTEOL, respectively, to be passed to  regexec().
       Any other modifiers cause an error.

   Setting match controls

       The  following  modifiers  affect the matching process or request addi-
       tional information. Some of them may also be  specified  on  a  pattern
       line  (see  above), in which case they apply to every subject line that
       is matched against that pattern.

             aftertext                 show text after match
             allaftertext              show text after captures
             allcaptures               show all captures
             allusedtext               show all consulted text (non-JIT only)
             altglobal                 alternative global matching
             callout_capture           show captures at callout time
             callout_data=<n>          set a value to pass via callouts
             callout_fail=<n>[:<m>]    control callout failure
             callout_none              do not supply a callout function
             copy=<number or name>     copy captured substring
             dfa                       use pcre2_dfa_match()
             find_limits               find match and recursion limits
             get=<number or name>      extract captured substring
             getall                    extract all captured substrings
         /g  global                    global matching
             jitstack=<n>              set size of JIT stack
             mark                      show mark values
             match_limit=>n>           set a match limit
             memory                    show memory usage
             offset=<n>                set starting offset
             ovector=<n>               set size of output vector
             recursion_limit=<n>       set a recursion limit
             replace=<string>          specify a replacement string
             startchar                 show startchar when relevant
             zero_terminate            pass the subject as zero-terminated

       The effects of these modifiers are described in the following sections.

   Showing more text

       The aftertext modifier requests that as well as outputting the part  of
       the subject string that matched the entire pattern, pcre2test should in
       addition output the remainder of the subject string. This is useful for
       tests where the subject contains multiple copies of the same substring.
       The allaftertext modifier requests the same action  for  captured  sub-
       strings as well as the main matched substring. In each case the remain-
       der is output on the following line with a plus character following the
       capture number.

       The  allusedtext modifier requests that all the text that was consulted
       during a successful pattern match by the interpreter should  be  shown.
       This  feature  is not supported for JIT matching, and if requested with
       JIT it is ignored (with  a  warning  message).  Setting  this  modifier
       affects the output if there is a lookbehind at the start of a match, or
       a lookahead at the end, or if \K is used  in  the  pattern.  Characters
       that  precede or follow the start and end of the actual match are indi-
       cated in the output by '<' or '>' characters underneath them.  Here  is
       an example:

           re> /(?<=pqr)abc(?=xyz)/
         data> 123pqrabcxyz456\=allusedtext
          0: pqrabcxyz
             <<<   >>>

       This  shows  that  the  matched string is "abc", with the preceding and
       following strings "pqr" and "xyz"  having  been  consulted  during  the
       match (when processing the assertions).

       The  startchar  modifier  requests  that the starting character for the
       match be indicated, if it is different to  the  start  of  the  matched
       string. The only time when this occurs is when \K has been processed as
       part of the match. In this situation, the output for the matched string
       is  displayed  from  the  starting  character instead of from the match
       point, with circumflex characters under  the  earlier  characters.  For
       example:

           re> /abc\Kxyz/
         data> abcxyz\=startchar
          0: abcxyz
             ^^^

       Unlike  allusedtext, the startchar modifier can be used with JIT.  How-
       ever, these two modifiers are mutually exclusive.

   Showing the value of all capture groups

       The allcaptures modifier requests that the values of all potential cap-
       tured parentheses be output after a match. By default, only those up to
       the highest one actually used in the match are output (corresponding to
       the  return  code from pcre2_match()). Groups that did not take part in
       the match are output as "<unset>".

   Testing callouts

       A callout function is supplied when pcre2test calls the library  match-
       ing  functions, unless callout_none is specified. If callout_capture is
       set, the current captured groups are output when a callout occurs.

       The callout_fail modifier can be given one or two numbers. If there  is
       only one number, 1 is returned instead of 0 when a callout of that num-
       ber is reached. If two numbers are given, 1 is  returned  when  callout
       <n> is reached for the <m>th time.

       The  callout_data  modifier can be given an unsigned or a negative num-
       ber.  Any value other than zero is used as a  return  from  pcre2test's
       callout function.

   Finding all matches in a string

       Searching for all possible matches within a subject can be requested by
       the global or /altglobal modifier. After finding a match, the  matching
       function  is  called  again to search the remainder of the subject. The
       difference between global and altglobal is that  the  former  uses  the
       start_offset  argument  to  pcre2_match() or pcre2_dfa_match() to start
       searching at a new point within the entire string (which is  what  Perl
       does), whereas the latter passes over a shortened subject. This makes a
       difference to the matching process if the pattern begins with a lookbe-
       hind assertion (including \b or \B).

       If  an  empty  string  is  matched,  the  next  match  is done with the
       PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED flags set, in order to search
       for another, non-empty, match at the same point in the subject. If this
       match fails, the start offset is advanced,  and  the  normal  match  is
       retried.  This  imitates the way Perl handles such cases when using the
       /g modifier or the split() function.  Normally,  the  start  offset  is
       advanced  by  one  character,  but if the newline convention recognizes
       CRLF as a newline, and the current character is CR followed by  LF,  an
       advance of two characters occurs.

   Testing substring extraction functions

       The  copy  and  get  modifiers  can  be  used  to  test  the pcre2_sub-
       string_copy_xxx() and pcre2_substring_get_xxx() functions.  They can be
       given  more than once, and each can specify a group name or number, for
       example:

          abcd\=copy=1,copy=3,get=G1

       If the #subject command is used to set default copy and/or  get  lists,
       these  can  be unset by specifying a negative number to cancel all num-
       bered groups and an empty name to cancel all named groups.

       The getall modifier tests  pcre2_substring_list_get(),  which  extracts
       all captured substrings.

       If  the  subject line is successfully matched, the substrings extracted
       by the convenience functions are output with  C,  G,  or  L  after  the
       string  number  instead  of  a colon. This is in addition to the normal
       full list. The string length (that is, the return from  the  extraction
       function) is given in parentheses after each substring, followed by the
       name when the extraction was by name.

   Testing the substitution function

       If the replace modifier is  set,  the  pcre2_substitute()  function  is
       called  instead  of  one  of  the  matching  functions.  Unlike subject
       strings, pcre2test does not  process  replacement  strings  for  escape
       sequences. In UTF mode, a replacement string is checked to see if it is
       a valid UTF-8 string.  If so, it is correctly converted to a UTF string
       of  the appropriate code unit width. If it is not a valid UTF-8 string,
       the individual code units are copied directly. This provides a means of
       passing an invalid UTF-8 string for testing purposes.

       If  the  global  modifier  is set, PCRE2_SUBSTITUTE_GLOBAL is passed to
       pcre2_substitute().  After  a  successful  substitution,  the  modified
       string  is  output, preceded by the number of replacements. This may be
       zero if there were no matches. Here is a simple example of a  substitu-
       tion test:

         /abc/replace=xxx
             =abc=abc=
          1: =xxx=abc=
             =abc=abc=\=global
          2: =xxx=xxx=

       Subject  and  replacement  strings  should be kept relatively short for
       substitution tests, as fixed-size buffers are used. To make it easy  to
       test  for buffer overflow, if the replacement string starts with a num-
       ber in square brackets, that number is passed to pcre2_substitute()  as
       the  size of the output buffer, with the replacement string starting at
       the next character. Here is an example that tests the edge case:

         /abc/
             123abc123\=replace=[10]XYZ
          1: 123XYZ123
             123abc123\=replace=[9]XYZ
         Failed: error -47: no more memory

       A replacement string is ignored with POSIX and DFA matching. Specifying
       partial  matching  provokes  an  error return ("bad option value") from
       pcre2_substitute().

   Setting the JIT stack size

       The jitstack modifier provides a way of setting the maximum stack  size
       that  is  used  by the just-in-time optimization code. It is ignored if
       JIT optimization is not being used. The value is a number of kilobytes.
       Providing a stack that is larger than the default 32K is necessary only
       for very complicated patterns.

   Setting match and recursion limits

       The match_limit and recursion_limit modifiers set the appropriate  lim-
       its in the match context. These values are ignored when the find_limits
       modifier is specified.

   Finding minimum limits

       If the find_limits modifier is present, pcre2test  calls  pcre2_match()
       several  times,  setting  different  values  in  the  match context via
       pcre2_set_match_limit() and pcre2_set_recursion_limit() until it  finds
       the  minimum values for each parameter that allow pcre2_match() to com-
       plete without error.

       If JIT is being used, only the match limit is relevant. If DFA matching
       is  being used, neither limit is relevant, and this modifier is ignored
       (with a warning message).

       The match_limit number is a measure of the amount of backtracking  that
       takes  place,  and  learning  the minimum value can be instructive. For
       most simple matches, the number is quite small, but for  patterns  with
       very  large numbers of matching possibilities, it can become large very
       quickly   with   increasing   length    of    subject    string.    The
       match_limit_recursion  number  is  a  measure of how much stack (or, if
       PCRE2 is compiled with NO_RECURSE, how much heap) memory is  needed  to
       complete the match attempt.

   Showing MARK names


       The mark modifier causes the names from backtracking control verbs that
       are returned from calls to pcre2_match() to be displayed. If a mark  is
       returned  for a match, non-match, or partial match, pcre2test shows it.
       For a match, it is on a line by itself, tagged with  "MK:".  Otherwise,
       it is added to the non-match message.

   Showing memory usage

       The  memory  modifier causes pcre2test to log all memory allocation and
       freeing calls that occur during a match operation.

   Setting a starting offset

       The offset modifier sets an offset  in  the  subject  string  at  which
       matching starts. Its value is a number of code units, not characters.

   Setting the size of the output vector

       The  ovector  modifier  applies  only  to  the subject line in which it
       appears, though of course it can also be used to set  a  default  in  a
       #subject  command. It specifies the number of pairs of offsets that are
       available for storing matching information. The default is 15.

       A value of zero is useful when testing the POSIX API because it  causes
       regexec() to be called with a NULL capture vector. When not testing the
       POSIX API, a value of  zero  is  used  to  cause  pcre2_match_data_cre-
       ate_from_pattern()  to  be  called, in order to create a match block of
       exactly the right size for the pattern. (It is not possible to create a
       match  block  with  a zero-length ovector; there is always at least one
       pair of offsets.)

   Passing the subject as zero-terminated

       By default, the subject string is passed to a native API matching func-
       tion with its correct length. In order to test the facility for passing
       a zero-terminated string, the zero_terminate modifier is  provided.  It
       causes the length to be passed as PCRE2_ZERO_TERMINATED. (When matching
       via the POSIX interface, this modifier has no effect, as  there  is  no
       facility for passing a length.)

       When  testing  pcre2_substitute(), this modifier also has the effect of
       passing the replacement string as zero-terminated.


THE ALTERNATIVE MATCHING FUNCTION

       By default,  pcre2test  uses  the  standard  PCRE2  matching  function,
       pcre2_match() to match each subject line. PCRE2 also supports an alter-
       native matching function, pcre2_dfa_match(), which operates in  a  dif-
       ferent  way, and has some restrictions. The differences between the two
       functions are described in the pcre2matching documentation.

       If the dfa modifier is set, the alternative matching function is  used.
       This  function  finds all possible matches at a given point in the sub-
       ject. If, however, the dfa_shortest modifier is set,  processing  stops
       after  the  first  match is found. This is always the shortest possible
       match.


DEFAULT OUTPUT FROM pcre2test

       This section describes the output when the  normal  matching  function,
       pcre2_match(), is being used.

       When  a  match  succeeds,  pcre2test  outputs the list of captured sub-
       strings, starting with number 0 for the string that matched  the  whole
       pattern.    Otherwise,  it  outputs  "No  match"  when  the  return  is
       PCRE2_ERROR_NOMATCH, or "Partial  match:"  followed  by  the  partially
       matching  substring  when the return is PCRE2_ERROR_PARTIAL. (Note that
       this is the entire substring that  was  inspected  during  the  partial
       match;  it  may  include  characters before the actual match start if a
       lookbehind assertion, \K, \b, or \B was involved.)

       For any other return, pcre2test outputs the PCRE2 negative error number
       and  a  short  descriptive  phrase. If the error is a failed UTF string
       check, the code unit offset of the start of the  failing  character  is
       also output. Here is an example of an interactive pcre2test run.

         $ pcre2test
         PCRE2 version 9.00 2014-05-10

           re> /^abc(\d+)/
         data> abc123
          0: abc123
          1: 123
         data> xyz
         No match

       Unset capturing substrings that are not followed by one that is set are
       not shown by pcre2test unless the allcaptures modifier is specified. In
       the following example, there are two capturing substrings, but when the
       first data line is matched, the second, unset substring is  not  shown.
       An  "internal" unset substring is shown as "<unset>", as for the second
       data line.

           re> /(a)|(b)/
         data> a
          0: a
          1: a
         data> b
          0: b
          1: <unset>
          2: b

       If the strings contain any non-printing characters, they are output  as
       \xhh  escapes  if  the  value is less than 256 and UTF mode is not set.
       Otherwise they are output as \x{hh...} escapes. See below for the defi-
       nition  of  non-printing characters. If the /aftertext modifier is set,
       the output for substring 0 is followed by the the rest of  the  subject
       string, identified by "0+" like this:

           re> /cat/aftertext
         data> cataract
          0: cat
          0+ aract

       If  global  matching  is  requested, the results of successive matching
       attempts are output in sequence, like this:

           re> /\Bi(\w\w)/g
         data> Mississippi
          0: iss
          1: ss
          0: iss
          1: ss
          0: ipp
          1: pp

       "No match" is output only if the first match attempt fails. Here is  an
       example  of  a  failure  message (the offset 4 that is specified by the
       offset modifier is past the end of the subject string):

           re> /xyz/
         data> xyz\=offset=4
         Error -24 (bad offset value)

       Note that whereas patterns can be continued over several lines (a plain
       ">"  prompt  is used for continuations), subject lines may not. However
       newlines can be included in a subject by means of the \n escape (or \r,
       \r\n, etc., depending on the newline sequence setting).


OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION

       When the alternative matching function, pcre2_dfa_match(), is used, the
       output consists of a list of all the matches that start  at  the  first
       point in the subject where there is at least one match. For example:

           re> /(tang|tangerine|tan)/
         data> yellow tangerine\=dfa
          0: tangerine
          1: tang
          2: tan

       Using  the normal matching function on this data finds only "tang". The
       longest matching string is always  given  first  (and  numbered  zero).
       After  a  PCRE2_ERROR_PARTIAL  return,  the output is "Partial match:",
       followed by the partially matching substring. Note  that  this  is  the
       entire  substring  that  was inspected during the partial match; it may
       include characters before the actual match start if a lookbehind asser-
       tion, \b, or \B was involved. (\K is not supported for DFA matching.)

       If global matching is requested, the search for further matches resumes
       at the end of the longest match. For example:

           re> /(tang|tangerine|tan)/g
         data> yellow tangerine and tangy sultana\=dfa
          0: tangerine
          1: tang
          2: tan
          0: tang
          1: tan
          0: tan

       The alternative matching function does not support  substring  capture,
       so  the  modifiers  that are concerned with captured substrings are not
       relevant.


RESTARTING AFTER A PARTIAL MATCH

       When the alternative matching function has given  the  PCRE2_ERROR_PAR-
       TIAL return, indicating that the subject partially matched the pattern,
       you can restart the match with additional subject data by means of  the
       dfa_restart modifier. For example:

           re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
         data> 23ja\=P,dfa
         Partial match: 23ja
         data> n05\=dfa,dfa_restart
          0: n05

       For  further  information  about partial matching, see the pcre2partial
       documentation.


CALLOUTS

       If the pattern contains any callout requests, pcre2test's callout func-
       tion  is  called  during  matching. This works with both matching func-
       tions. By default, the called function displays the callout number, the
       start  and  current  positions in the text at the callout time, and the
       next pattern item to be tested. For example:

         --->pqrabcdef
           0    ^  ^     \d

       This output indicates that  callout  number  0  occurred  for  a  match
       attempt  starting  at  the fourth character of the subject string, when
       the pointer was at the seventh character, and  when  the  next  pattern
       item  was  \d.  Just  one circumflex is output if the start and current
       positions are the same.

       Callouts numbered 255 are assumed to be automatic callouts, inserted as
       a  result  of the /auto_callout pattern modifier. In this case, instead
       of showing the callout number, the offset in the pattern, preceded by a
       plus, is output. For example:

           re> /\d?[A-E]\*/auto_callout
         data> E*
         --->E*
          +0 ^      \d?
          +3 ^      [A-E]
          +8 ^^     \*
         +10 ^ ^
          0: E*

       If a pattern contains (*MARK) items, an additional line is output when-
       ever a change of latest mark is passed to  the  callout  function.  For
       example:

           re> /a(*MARK:X)bc/auto_callout
         data> abc
         --->abc
          +0 ^       a
          +1 ^^      (*MARK:X)
         +10 ^^      b
         Latest Mark: X
         +11 ^ ^     c
         +12 ^  ^
          0: abc

       The  mark  changes between matching "a" and "b", but stays the same for
       the rest of the match, so nothing more is output. If, as  a  result  of
       backtracking,  the  mark  reverts to being unset, the text "<unset>" is
       output.

       The callout function in pcre2test returns zero (carry on  matching)  by
       default,  but you can use a callout_fail modifier in a subject line (as
       described above) to change this and other parameters of the callout.

       Inserting callouts can be helpful when using pcre2test to check compli-
       cated  regular expressions. For further information about callouts, see
       the pcre2callout documentation.


NON-PRINTING CHARACTERS

       When pcre2test is outputting text in the compiled version of a pattern,
       bytes  other  than 32-126 are always treated as non-printing characters
       and are therefore shown as hex escapes.

       When pcre2test is outputting text that is a matched part of  a  subject
       string,  it behaves in the same way, unless a different locale has been
       set for the pattern (using the /locale modifier).  In  this  case,  the
       isprint()  function  is  used  to distinguish printing and non-printing
       characters.


SEE ALSO

       pcre2(3),  pcre2api(3),  pcre2callout(3),  pcre2jit,  pcre2matching(3),
       pcre2partial(d), pcre2pattern(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 23 November 2014
       Copyright (c) 1997-2014 University of Cambridge.