Fix pcre2grep -o bug when ovector overflows; add option to adjust the limit;

raise the default limit; give error if -o requests an uncaptured parens.

ChangeLog

@@ -39,6 +39,12 @@ minimum is potentially useful.
 10. A (*MARK) value inside a successful condition was not being returned by the 
 interpretive matcher (it was returned by JIT). This bug has been mended.
 
+11. A bug in pcre2grep meant that -o without an argument (or -o0) didn't work 
+if the pattern had more than 32 capturing parentheses. This is fixed. In 
+addition (a) the default limit for groups requested by -o<n> has been raised to 
+50, (b) the new --om-capture option changes the limit, (c) an error is raised 
+if -o asks for a group that is above the limit.
+
 
 Version 10.33 16-April-2019
 ---------------------------

RunGrepTest

@@ -653,6 +653,13 @@ printf 'ABC\0XYZ\nABCDEF\nDEFABC\n' >testtemp2grep
 $valgrind $vjs $pcre2grep -a -f testtemp1grep testtemp2grep >>testtrygrep
 echo "RC=$?" >>testtrygrep
 
+echo "---------------------------- Test 127 -----------------------------" >>testtrygrep
+(cd $srcdir; $valgrind $vjs $pcre2grep -o --om-capture=0 'pattern()()()()' testdata/grepinput) >>testtrygrep
+echo "RC=$?" >>testtrygrep
+
+echo "---------------------------- Test 128 -----------------------------" >>testtrygrep
+(cd $srcdir; $valgrind $vjs $pcre2grep -o1 --om-capture=0 'pattern()()()()' testdata/grepinput) >>testtrygrep 2>&1
+echo "RC=$?" >>testtrygrep
 
 # Now compare the results.
 

doc/html/pcre2api.html

@@ -2266,12 +2266,12 @@ segment.
   PCRE2_INFO_MINLENGTH
 </pre>
 If a minimum length for matching subject strings was computed, its value is
-returned. Otherwise the returned value is 0. The value is a number of
+returned. Otherwise the returned value is 0. This value is not computed when
-characters, which in UTF mode may be different from the number of code units.
+PCRE2_NO_START_OPTIMIZE is set. The value is a number of characters, which in
-The third argument should point to an <b>uint32_t</b> variable. The value is a
+UTF mode may be different from the number of code units. The third argument
-lower bound to the length of any matching string. There may not be any strings
+should point to an <b>uint32_t</b> variable. The value is a lower bound to the
-of that length that do actually match, but every string that does match is at
+length of any matching string. There may not be any strings of that length that
-least that long.
+do actually match, but every string that does match is at least that long.
 <pre>
   PCRE2_INFO_NAMECOUNT
   PCRE2_INFO_NAMEENTRYSIZE
@@ -3836,7 +3836,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC42" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 30 May 2019
+Last updated: 11 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>

doc/html/pcre2grep.html

@@ -685,20 +685,32 @@ otherwise empty line. This option is mutually exclusive with <b>--output</b>,
 <P>
 <b>-o</b><i>number</i>, <b>--only-matching</b>=<i>number</i>
 Show only the part of the line that matched the capturing parentheses of the
-given number. Up to 32 capturing parentheses are supported, and -o0 is
+given number. Up to 50 capturing parentheses are supported by default. This
-equivalent to <b>-o</b> without a number. Because these options can be given
+limit can be changed via the <b>--om-capture</b> option. A pattern may contain
-without an argument (see above), if an argument is present, it must be given in
+any number of capturing parentheses, but only those whose number is within the
-the same shell item, for example, -o3 or --only-matching=2. The comments given
+limit can be accessed by <b>-o</b>. An error occurs if the number specified by
-for the non-argument case above also apply to this option. If the specified
+<b>-o</b> is greater than the limit.
-capturing parentheses do not exist in the pattern, or were not set in the
+<br>
-match, nothing is output unless the file name or line number are being output.
+<br>
+-o0 is the same as <b>-o</b> without a number. Because these options can be
+given without an argument (see above), if an argument is present, it must be
+given in the same shell item, for example, -o3 or --only-matching=2. The
+comments given for the non-argument case above also apply to this option. If
+the specified capturing parentheses do not exist in the pattern, or were not
+set in the match, nothing is output unless the file name or line number are
+being output.
 <br>
 <br>
 If this option is given multiple times, multiple substrings are output for each
 match, in the order the options are given, and all on one line. For example,
 -o3 -o1 -o3 causes the substrings matched by capturing parentheses 3 and 1 and
 then 3 again to be output. By default, there is no separator (but see the next
-option).
+but one option).
+</P>
+<P>
+<b>--om-capture</b>=<i>number</i>
+Set the number of capturing parentheses that can be accessed by <b>-o</b>. The 
+default is 50.
 </P>
 <P>
 <b>--om-separator</b>=<i>text</i>
@@ -980,7 +992,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC16" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 28 May 2019
+Last updated: 15 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>

doc/html/pcre2test.html

@@ -739,7 +739,9 @@ options, the line is omitted. "First code unit" is where any match must start;
 if there is more than one they are listed as "starting code units". "Last code
 unit" is the last literal code unit that must be present in any match. This is
 not necessarily the last character. These lines are omitted if no starting or
-ending code units are recorded.
+ending code units are recorded. The subject length line is omitted when 
+<b>no_start_optimize</b> is set because the minimum length is not calculated 
+when it can never be used.
 </P>
 <P>
 The <b>framesize</b> modifier shows the size, in bytes, of the storage frames
@@ -2079,7 +2081,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC21" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 23 May 2019
+Last updated: 11 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>

doc/pcre2grep.1

@@ -1,4 +1,4 @@
-.TH PCRE2GREP 1 "28 May 2019" "PCRE2 10.34"
+.TH PCRE2GREP 1 "15 June 2019" "PCRE2 10.34"
 .SH NAME
 pcre2grep - a grep with Perl-compatible regular expressions.
 .SH SYNOPSIS
@@ -596,19 +596,29 @@ otherwise empty line. This option is mutually exclusive with \fB--output\fP,
 .TP
 \fB-o\fP\fInumber\fP, \fB--only-matching\fP=\fInumber\fP
 Show only the part of the line that matched the capturing parentheses of the
-given number. Up to 32 capturing parentheses are supported, and -o0 is
+given number. Up to 50 capturing parentheses are supported by default. This
-equivalent to \fB-o\fP without a number. Because these options can be given
+limit can be changed via the \fB--om-capture\fP option. A pattern may contain
-without an argument (see above), if an argument is present, it must be given in
+any number of capturing parentheses, but only those whose number is within the
-the same shell item, for example, -o3 or --only-matching=2. The comments given
+limit can be accessed by \fB-o\fP. An error occurs if the number specified by
-for the non-argument case above also apply to this option. If the specified
+\fB-o\fP is greater than the limit.
-capturing parentheses do not exist in the pattern, or were not set in the
+.sp
-match, nothing is output unless the file name or line number are being output.
+-o0 is the same as \fB-o\fP without a number. Because these options can be
+given without an argument (see above), if an argument is present, it must be
+given in the same shell item, for example, -o3 or --only-matching=2. The
+comments given for the non-argument case above also apply to this option. If
+the specified capturing parentheses do not exist in the pattern, or were not
+set in the match, nothing is output unless the file name or line number are
+being output.
 .sp
 If this option is given multiple times, multiple substrings are output for each
 match, in the order the options are given, and all on one line. For example,
 -o3 -o1 -o3 causes the substrings matched by capturing parentheses 3 and 1 and
 then 3 again to be output. By default, there is no separator (but see the next
-option).
+but one option).
+.TP
+\fB--om-capture\fP=\fInumber\fP
+Set the number of capturing parentheses that can be accessed by \fB-o\fP. The 
+default is 50.
 .TP
 \fB--om-separator\fP=\fItext\fP
 Specify a separating string for multiple occurrences of \fB-o\fP. The default
@@ -894,6 +904,6 @@ Cambridge, England.
 .rs
 .sp
 .nf
-Last updated: 28 May 2019
+Last updated: 15 June 2019
 Copyright (c) 1997-2019 University of Cambridge.
 .fi

doc/pcre2grep.txt

@@ -662,23 +662,32 @@ OPTIONS
 
        -onumber, --only-matching=number
                  Show only the part of the line  that  matched  the  capturing
-                 parentheses of the given number. Up to 32 capturing parenthe-
+                 parentheses of the given number. Up to 50 capturing parenthe-
-                 ses are supported, and -o0 is equivalent to -o without a num-
+                 ses are supported by default. This limit can be  changed  via
-                 ber.  Because  these options can be given without an argument
+                 the  --om-capture option. A pattern may contain any number of
-                 (see above), if an argument is present, it must be  given  in
+                 capturing parentheses, but only those whose number is  within
-                 the  same  shell item, for example, -o3 or --only-matching=2.
+                 the  limit can be accessed by -o. An error occurs if the num-
-                 The comments given for the non-argument case above also apply
+                 ber specified by -o is greater than the limit.
-                 to this option. If the specified capturing parentheses do not
-                 exist in the pattern, or were not set in the  match,  nothing
-                 is  output unless the file name or line number are being out-
-                 put.
 
-                 If this option is given multiple times,  multiple  substrings
+                 -o0 is the same as -o without a number. Because these options
-                 are  output  for  each  match,  in  the order the options are
+                 can  be given without an argument (see above), if an argument
-                 given, and all on one line. For example, -o3 -o1  -o3  causes
+                 is present, it must be given in  the  same  shell  item,  for
-                 the  substrings  matched by capturing parentheses 3 and 1 and
+                 example, -o3 or --only-matching=2. The comments given for the
-                 then 3 again to be output. By default, there is no  separator
+                 non-argument case above also apply to  this  option.  If  the
-                 (but see the next option).
+                 specified  capturing parentheses do not exist in the pattern,
+                 or were not set in the match, nothing is  output  unless  the
+                 file name or line number are being output.
+
+                 If  this  option is given multiple times, multiple substrings
+                 are output for each match,  in  the  order  the  options  are
+                 given,  and  all on one line. For example, -o3 -o1 -o3 causes
+                 the substrings matched by capturing parentheses 3 and  1  and
+                 then  3 again to be output. By default, there is no separator
+                 (but see the next but one option).
+
+       --om-capture=number
+                 Set the number of capturing parentheses that can be  accessed
+                 by -o. The default is 50.
 
        --om-separator=text
                  Specify  a  separating string for multiple occurrences of -o.
@@ -955,5 +964,5 @@ AUTHOR
 
 REVISION
 
-       Last updated: 28 May 2019
+       Last updated: 15 June 2019
        Copyright (c) 1997-2019 University of Cambridge.

doc/pcre2test.txt

@@ -670,7 +670,9 @@ PATTERN MODIFIERS
        as "starting code units". "Last code unit" is  the  last  literal  code
        unit  that  must  be  present in any match. This is not necessarily the
        last character. These lines are omitted if no starting or  ending  code
-       units are recorded.
+       units   are   recorded.   The  subject  length  line  is  omitted  when
+       no_start_optimize is set because the minimum length is  not  calculated
+       when it can never be used.
 
        The  framesize modifier shows the size, in bytes, of the storage frames
        used by pcre2_match() for handling backtracking. The  size  depends  on
@@ -1891,5 +1893,5 @@ AUTHOR
 
 REVISION
 
-       Last updated: 23 May 2019
+       Last updated: 11 June 2019
        Copyright (c) 1997-2019 University of Cambridge.

src/pcre2grep.c

@@ -128,7 +128,7 @@ be C99 don't support it (hence DISABLE_PERCENT_ZT). */
 
 typedef int BOOL;
 
-#define OFFSET_SIZE 33
+#define DEFAULT_CAPTURE_MAX 50
 
 #if BUFSIZ > 8192
 #define MAXPATLEN BUFSIZ
@@ -255,6 +255,8 @@ static pcre2_compile_context *compile_context;
 static pcre2_match_context *match_context;
 static pcre2_match_data *match_data;
 static PCRE2_SIZE *offsets;
+static uint32_t offset_size;
+static uint32_t capture_max = DEFAULT_CAPTURE_MAX;
 
 static BOOL count_only = FALSE;
 static BOOL do_colour = FALSE;
@@ -404,6 +406,7 @@ used to identify them. */
 #define N_INCLUDE_FROM (-21)
 #define N_OM_SEPARATOR (-22)
 #define N_MAX_BUFSIZE  (-23)
+#define N_OM_CAPTURE   (-24)
 
 static option_item optionlist[] = {
   { OP_NODATA,     N_NULL,   NULL,              "",              "terminate options" },
@@ -450,6 +453,7 @@ static option_item optionlist[] = {
   { OP_STRING,     'O',      &output_text,       "output=text",   "show only this text (possibly expanded)" },
   { OP_OP_NUMBERS, 'o',      &only_matching_data, "only-matching=n", "show only the part of the line that matched" },
   { OP_STRING,     N_OM_SEPARATOR, &om_separator, "om-separator=text", "set separator for multiple -o output" },
+  { OP_U32NUMBER,  N_OM_CAPTURE, &capture_max,  "om-capture=n",  "set capture count for --only-matching" },
   { OP_NODATA,     'q',      NULL,              "quiet",         "suppress output, just set return code" },
   { OP_NODATA,     'r',      NULL,              "recursive",     "recursively scan sub-directories" },
   { OP_PATLIST,    N_EXCLUDE,&exclude_patdata,  "exclude=pattern","exclude matching files when recursing" },
@@ -2591,7 +2595,7 @@ while (ptr < endptr)
 
       for (i = 0; i < jfriedl_XR; i++)
           match = (pcre_exec(patterns->compiled, patterns->hint, ptr, length, 0,
-              PCRE2_NOTEMPTY, offsets, OFFSET_SIZE) >= 0);
+              PCRE2_NOTEMPTY, offsets, offset_size) >= 0);
 
       if (gettimeofday(&end_time, &dummy) != 0)
               perror("bad gettimeofday");
@@ -2711,7 +2715,7 @@ while (ptr < endptr)
           for (om = only_matching; om != NULL; om = om->next)
             {
             int n = om->groupnum;
-            if (n < mrc)
+            if (n == 0 || n < mrc)
               {
               int plen = offsets[2*n + 1] - offsets[2*n];
               if (plen > 0)
@@ -3663,6 +3667,7 @@ int rc = 1;
 BOOL only_one_at_top;
 patstr *cp;
 fnstr *fn;
+omstr *om;
 const char *locale_from = "--locale";
 
 #ifdef SUPPORT_PCRE2GREP_JIT
@@ -3679,20 +3684,6 @@ must use STDOUT_NL to terminate lines. */
 _setmode(_fileno(stdout), _O_BINARY);
 #endif
 
-/* Set up a default compile and match contexts and a match data block. */
-
-compile_context = pcre2_compile_context_create(NULL);
-match_context = pcre2_match_context_create(NULL);
-match_data = pcre2_match_data_create(OFFSET_SIZE, NULL);
-offsets = pcre2_get_ovector_pointer(match_data);
-
-/* If string (script) callouts are supported, set up the callout processing
-function. */
-
-#ifdef SUPPORT_PCRE2GREP_CALLOUT
-pcre2_set_callout(match_context, pcre2grep_callout, NULL);
-#endif
-
 /* Process the options */
 
 for (i = 1; i < argc; i++)
@@ -4039,12 +4030,40 @@ if (only_matching_count > 1)
   pcre2grep_exit(usage(2));
   }
 
+/* Check that there is a big enough ovector for all -o settings. */
+
+for (om = only_matching; om != NULL; om = om->next)
+  {
+  int n = om->groupnum;
+  if (n > (int)capture_max)
+    {
+    fprintf(stderr, "pcre2grep: Requested group %d cannot be captured.\n", n);
+    fprintf(stderr, "pcre2grep: Use --om-capture to increase the size of the capture vector.\n");
+    goto EXIT2;
+    }
+  }
+
 /* Check the text supplied to --output for errors. */
 
 if (output_text != NULL &&
     !syntax_check_output_text((PCRE2_SPTR)output_text, FALSE))
   goto EXIT2;
 
+/* Set up default compile and match contexts and a match data block. */
+
+offset_size = capture_max + 1;
+compile_context = pcre2_compile_context_create(NULL);
+match_context = pcre2_match_context_create(NULL);
+match_data = pcre2_match_data_create(offset_size, NULL);
+offsets = pcre2_get_ovector_pointer(match_data);
+
+/* If string (script) callouts are supported, set up the callout processing
+function. */
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+pcre2_set_callout(match_context, pcre2grep_callout, NULL);
+#endif
+
 /* Put limits into the match data block. */
 
 if (heap_limit != PCRE2_UNSET) pcre2_set_heap_limit(match_context, heap_limit);

testdata/grepoutput

@@ -949,3 +949,10 @@ RC=0
 ---------------------------- Test 126 -----------------------------
 ABCXYZ
 RC=0
+---------------------------- Test 127 -----------------------------
+pattern
+RC=0
+---------------------------- Test 128 -----------------------------
+pcre2grep: Requested group 1 cannot be captured.
+pcre2grep: Use --om-capture to increase the size of the capture vector.
+RC=2