Fix bugs in new UCP casing code for back references and characters with more

than 2 cases.

ChangeLog

@@ -69,7 +69,7 @@ character is decoded in JIT.
 18. Changes in many areas of the code so that when Unicode is supported and 
 PCRE2_UCP is set without PCRE2_UTF, Unicode character properties are used for 
 upper/lower case computations on characters whose code points are greater than 
-127. Documentation is not yet updated. JIT is not yet updated.
+127.
 
 19. The function for checking UTF-16 validity was returning an incorrect offset
 for the start of the error when a high surrogate was not followed by a valid

src/pcre2_compile.c

@@ -5565,12 +5565,12 @@ for (;; pptr++)
       zerofirstcu = firstcu;
       zerofirstcuflags = firstcuflags;
 
-      /* For caseless UTF mode, check whether this character has more than
-      one other case. If so, generate a special OP_NOTPROP item instead of
+      /* For caseless UTF or UCP mode, check whether this character has more
+      than one other case. If so, generate a special OP_NOTPROP item instead of
       OP_NOTI. */
 
 #ifdef SUPPORT_UNICODE
-      if (utf && (options & PCRE2_CASELESS) != 0 &&
+      if ((utf||ucp) && (options & PCRE2_CASELESS) != 0 &&
           (d = UCD_CASESET(c)) != 0)
         {
         *code++ = OP_NOTPROP;
@@ -7824,11 +7824,12 @@ for (;; pptr++)
     NORMAL_CHAR_SET:  /* Character is already in meta */
     matched_char = TRUE;
 
-    /* For caseless UTF mode, check whether this character has more than one
-    other case. If so, generate a special OP_PROP item instead of OP_CHARI. */
+    /* For caseless UTF or UCP mode, check whether this character has more than
+    one other case. If so, generate a special OP_PROP item instead of OP_CHARI.
+    */
 
 #ifdef SUPPORT_UNICODE
-    if (utf && (options & PCRE2_CASELESS) != 0)
+    if ((utf||ucp) && (options & PCRE2_CASELESS) != 0)
       {
       uint32_t caseset = UCD_CASESET(meta);
       if (caseset != 0)

src/pcre2_match.c

@@ -381,8 +381,12 @@ length = Fovector[offset+1] - Fovector[offset];
 if (caseless)
   {
 #if defined SUPPORT_UNICODE
-  if ((mb->poptions & PCRE2_UTF) != 0)
+  BOOL utf = (mb->poptions & PCRE2_UTF) != 0;
+   
+  if (utf || (mb->poptions & PCRE2_UCP) != 0)
     {
+    PCRE2_SPTR endptr = p + length;
+
     /* Match characters up to the end of the reference. NOTE: the number of
     code units matched may differ, because in UTF-8 there are some characters
     whose upper and lower case codes have different numbers of bytes. For
@@ -390,16 +394,25 @@ if (caseless)
     bytes in UTF-8); a sequence of 3 of the former uses 6 bytes, as does a
     sequence of two of the latter. It is important, therefore, to check the
     length along the reference, not along the subject (earlier code did this
-    wrong). */
+    wrong). UCP without uses Unicode properties but without UTF encoding. */
      
-    PCRE2_SPTR endptr = p + length;
     while (p < endptr)
       {
       uint32_t c, d;
       const ucd_record *ur;
       if (eptr >= mb->end_subject) return 1;   /* Partial match */
-      GETCHARINC(c, eptr);
-      GETCHARINC(d, p);
+      
+      if (utf)
+        { 
+        GETCHARINC(c, eptr);
+        GETCHARINC(d, p);
+        }
+      else
+        {
+        c = *eptr++;
+        d = *p++;  
+        }
+ 
       ur = GET_UCD(d);
       if (c != d && c != (uint32_t)((int)d + ur->other_case))
         {
@@ -415,7 +428,7 @@ if (caseless)
   else
 #endif
 
-  /* Not in UTF mode */
+  /* Not in UTF or UCP mode */
     {
     for (; length > 0; length--)
       {
@@ -432,7 +445,8 @@ if (caseless)
   }
 
 /* In the caseful case, we can just compare the code units, whether or not we
-are in UTF mode. When partial matching, we have to do this unit-by-unit. */
+are in UTF and/or UCP mode. When partial matching, we have to do this unit by
+unit. */
 
 else
   {

testdata/testinput12

@@ -530,6 +530,20 @@
 /X(\x{121})Y/ucp,replace=>\U$1<,substitute_extended
     X\x{121}Y
 
+/s/i,ucp
+    \x{17f} 
+
+/s/i,utf
+    \x{17f} 
+
+/[^s]/i,ucp
+\= Expect no match
+    \x{17f} 
+
+/[^s]/i,utf
+\= Expect no match
+    \x{17f} 
+
 # ---------------------------------------------------- 
 
 # End of testinput12

testdata/testinput5

@@ -2181,4 +2181,7 @@
 
 /(|ß)7/caseless,ucp
 
+/(\xc1)\1/i,ucp
+    \xc1\xe1\=no_jit
+    
 # End of testinput5

testdata/testoutput12-16

@@ -1761,6 +1761,24 @@ Subject length lower bound = 1
     X\x{121}Y
  1: >\x{120}<
 
+/s/i,ucp
+    \x{17f} 
+ 0: \x{17f}
+
+/s/i,utf
+    \x{17f} 
+ 0: \x{17f}
+
+/[^s]/i,ucp
+\= Expect no match
+    \x{17f} 
+No match
+
+/[^s]/i,utf
+\= Expect no match
+    \x{17f} 
+No match
+
 # ---------------------------------------------------- 
 
 # End of testinput12

testdata/testoutput12-32

@@ -1759,6 +1759,24 @@ Subject length lower bound = 1
     X\x{121}Y
  1: >\x{120}<
 
+/s/i,ucp
+    \x{17f} 
+ 0: \x{17f}
+
+/s/i,utf
+    \x{17f} 
+ 0: \x{17f}
+
+/[^s]/i,ucp
+\= Expect no match
+    \x{17f} 
+No match
+
+/[^s]/i,utf
+\= Expect no match
+    \x{17f} 
+No match
+
 # ---------------------------------------------------- 
 
 # End of testinput12

testdata/testoutput5

@@ -4940,4 +4940,9 @@ Subject length lower bound = 3
 
 /(|ß)7/caseless,ucp
 
+/(\xc1)\1/i,ucp
+    \xc1\xe1\=no_jit
+ 0: \xc1\xe1
+ 1: \xc1
+    
 # End of testinput5