Lock out \N{U+hhhh} in non-UTF (non-Unicode) modes.

ChangeLog

@@ -130,7 +130,7 @@ present.
 28. A (*MARK) name was not being passed back for positive assertions that were
 terminated by (*ACCEPT).
 
-29. Add support for \N{U+dddd}, but not in EBCDIC environments.
+29. Add support for \N{U+dddd}, but only in Unicode mode.
 
 30. Add support for (?^) for unsetting all imnsx options.
 

doc/pcre2api.3

@@ -1,4 +1,4 @@
-.TH PCRE2API 3 "03 August 2018" "PCRE2 10.32"
+.TH PCRE2API 3 "02 September 2018" "PCRE2 10.32"
 .SH NAME
 PCRE2 - Perl-compatible regular expressions (revised API)
 .sp
@@ -1756,7 +1756,8 @@ behaviour of PCRE2 are given in the
 .\" HREF
 \fBpcre2unicode\fP
 .\"
-page.
+page. In particular, note that it changes the way PCRE2_CASELESS handles 
+characters with code points greater than 127.
 .
 .
 .\" HTML <a name="extracompileoptions"></a>

doc/pcre2pattern.3

@@ -1,4 +1,4 @@
-.TH PCRE2PATTERN 3 "03 August 2018" "PCRE2 10.32"
+.TH PCRE2PATTERN 3 "02 September 2018" "PCRE2 10.32"
 .SH NAME
 PCRE2 - Perl-compatible regular expressions (revised API)
 .SH "PCRE2 REGULAR EXPRESSION DETAILS"
@@ -376,14 +376,15 @@ these escapes are as follows:
   \eddd        character with octal code ddd, or backreference
   \eo{ddd..}   character with octal code ddd..
   \exhh        character with hex code hh
-  \ex{hhh..}   character with hex code hhh.. (default mode)
+  \ex{hhh..}   character with hex code hhh..
-  \eN{U+hhh..} character with Unicode code point hhh..
+  \eN{U+hhh..} character with Unicode hex code point hhh..
   \euhhhh      character with hex code hhhh (when PCRE2_ALT_BSUX is set)
 .sp
+The \eN{U+hhh..} escape sequence is recognized only when the PCRE2_UTF option
+is set, that is, when PCRE2 is operating in a Unicode mode. Perl also uses
+\eN{name} to specify characters by Unicode name; PCRE2 does not support this.
 Note that when \eN is not followed by an opening brace (curly bracket) it has
 an entirely different meaning, matching any character that is not a newline.
-Perl also uses \eN{name} to specify characters by Unicode name; PCRE2 does not
-support this.
 .P
 The precise effect of \ecx on ASCII characters is as follows: if x is a lower
 case letter, it is converted to upper case. Then bit 6 of the character (hex
@@ -509,7 +510,8 @@ limited to certain values, as follows:
 Invalid Unicode code points are all those in the range 0xd800 to 0xdfff (the
 so-called "surrogate" code points). The check for these can be disabled by the
 caller of \fBpcre2_compile()\fP by setting the option
-PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES.
+PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES. However, this is possible only in UTF-8
+and UTF-32 modes, because these values are not representable in UTF-16.
 .
 .
 .SS "Escape sequences in character classes"
@@ -3650,6 +3652,6 @@ Cambridge, England.
 .rs
 .sp
 .nf
-Last updated: 03 August 2018
+Last updated: 02 September 2018
 Copyright (c) 1997-2018 University of Cambridge.
 .fi

doc/pcre2syntax.3

@@ -1,4 +1,4 @@
-.TH PCRE2SYNTAX 3 "01 August 2018" "PCRE2 10.32"
+.TH PCRE2SYNTAX 3 "02 September 2018" "PCRE2 10.32"
 .SH NAME
 PCRE2 - Perl-compatible regular expressions (revised API)
 .SH "PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY"
@@ -35,7 +35,7 @@ This table applies to ASCII and Unicode environments.
   \eddd       character with octal code ddd, or backreference
   \eo{ddd..}  character with octal code ddd..
   \eU         "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
-  \eN{U+hh..} character with Unicode code point hh..
+  \eN{U+hh..} character with Unicode code point hh.. (Unicode mode only)
   \euhhhh     character with hex code hhhh (if PCRE2_ALT_BSUX is set)
   \exhh       character with hex code hh
   \ex{hh..}   character with hex code hh..
@@ -621,6 +621,6 @@ Cambridge, England.
 .rs
 .sp
 .nf
-Last updated: 01 August 2018
+Last updated: 02 September 2018
 Copyright (c) 1997-2018 University of Cambridge.
 .fi

doc/pcre2unicode.3

@@ -1,4 +1,4 @@
-.TH PCRE2UNICODE 3 "17 May 2017" "PCRE2 10.30"
+.TH PCRE2UNICODE 3 "02 September 2018" "PCRE2 10.32"
 .SH NAME
 PCRE - Perl-compatible regular expressions (revised API)
 .SH "UNICODE AND UTF SUPPORT"
@@ -16,7 +16,8 @@ you must call
 with the PCRE2_UTF option flag, or the pattern must start with the sequence
 (*UTF). When either of these is the case, both the pattern and any subject
 strings that are matched against it are treated as UTF strings instead of
-strings of individual one-code-unit characters.
+strings of individual one-code-unit characters. There are also some other
+changes to the way characters are handled, as documented below.
 .P
 If you do not need Unicode support you can build PCRE2 without it, in which
 case the library will be smaller.
@@ -51,6 +52,10 @@ unbraced hexadecimal escape sequences (for example, \ex{b3} or \exb3). Larger
 values have to use braced sequences. Unbraced octal code points up to \e777 are
 also recognized; larger ones can be coded using \eo{...}.
 .P
+The escape sequence \eN{U+<hex digits>} is recognized as another way of
+specifying a Unicode character by code point in a UTF mode. It is not allowed 
+in non-UTF modes.
+.P
 In UTF modes, repeat quantifiers apply to complete UTF characters, not to
 individual code units.
 .P
@@ -280,6 +285,6 @@ Cambridge, England.
 .rs
 .sp
 .nf
-Last updated: 17 May 2017
+Last updated: 02 September 2018
-Copyright (c) 1997-2017 University of Cambridge.
+Copyright (c) 1997-2018 University of Cambridge.
 .fi

src/pcre2.h.in

@@ -316,7 +316,7 @@ pcre2_pattern_convert(). */
 #define PCRE2_ERROR_INTERNAL_BAD_CODE_IN_SKIP      190
 #define PCRE2_ERROR_NO_SURROGATES_IN_UTF16         191
 #define PCRE2_ERROR_BAD_LITERAL_OPTIONS            192
-#define PCRE2_ERROR_NOT_SUPPORTED_IN_EBCDIC        193
+#define PCRE2_ERROR_SUPPORTED_ONLY_IN_UNICODE      193
 #define PCRE2_ERROR_INVALID_HYPHEN_IN_OPTIONS      194
 
 

src/pcre2_compile.c

@@ -1454,16 +1454,22 @@ else if ((i = escapes[c - ESCAPES_FIRST]) != 0)
       /* \N{U+ can be handled by the \x{ code. However, this construction is
       not valid in EBCDIC environments because it specifies a Unicode
       character, not a codepoint in the local code. For example \N{U+0041}
-      must be "A" in all environments. */
+      must be "A" in all environments. Also, in Perl, \N{U+ forces Unicode 
+      casing semantics for the entire pattern, so allow it only in UTF (i.e. 
+      Unicode) mode. */
 
       if (ptrend - p > 1 && *p == CHAR_U && p[1] == CHAR_PLUS)
         {
 #ifdef EBCDIC
         *errorcodeptr = ERR93;
 #else
+        if (utf)
+          { 
           ptr = p + 1;
           escape = 0;   /* Not a fancy escape after all */
           goto COME_FROM_NU;
+          }
+        else *errorcodeptr = ERR93;   
 #endif
         }
 

src/pcre2_error.c

@@ -179,7 +179,7 @@ static const unsigned char compile_error_texts[] =
   "internal error: bad code value in parsed_skip()\0"
   "PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is not allowed in UTF-16 mode\0"
   "invalid option bits with PCRE2_LITERAL\0"
-  "\\N{U+dddd} is not supported in EBCDIC mode\0"
+  "\\N{U+dddd} is supported only in Unicode (UTF) mode\0"
   "invalid hyphen in option setting\0"
   ;
 

testdata/testinput5

@@ -2089,6 +2089,8 @@
 
 /\N{U+}/
 
+/\N{U+}/utf
+
 /\N{U}/
 
 # This tests the non-UTF Unicode NEL pattern whitespace character, only

testdata/testoutput5

@@ -4751,6 +4751,9 @@ No match
  0: \x{1d1aa}
 
 /\N{U+}/
+Failed: error 193 at offset 2: \N{U+dddd} is supported only in Unicode (UTF) mode
+
+/\N{U+}/utf
 Failed: error 178 at offset 5: digits missing in \x{} or \o{} or \N{U+}
 
 /\N{U}/