From 8fe95cf804f36b29ae176b6208c2d770a53a25c3 Mon Sep 17 00:00:00 2001 From: "Philip.Hazel" Date: Fri, 20 Feb 2015 09:38:54 +0000 Subject: [PATCH] Documentation correction. --- HACKING | 189 +++++++++++++++++++++++++++++--------------------------- 1 file changed, 99 insertions(+), 90 deletions(-) diff --git a/HACKING b/HACKING index 5eb0315..87a7579 100644 --- a/HACKING +++ b/HACKING @@ -1,14 +1,14 @@ Technical Notes about PCRE2 --------------------------- -These are very rough technical notes that record potentially useful information +These are very rough technical notes that record potentially useful information about PCRE2 internals. PCRE2 is a library based on the original PCRE library, but with a revised (and incompatible) API. To avoid confusion, the original library is referred to as PCRE1 below. For information about testing PCRE2, see the pcre2test documentation and the comment at the head of the RunTest file. -PCRE1 releases were up to 8.3x when PCRE2 was developed. The 8.xx series will -continue for bugfixes if necessary. PCRE2 releases start at 10.0 to avoid +PCRE1 releases were up to 8.3x when PCRE2 was developed. The 8.xx series will +continue for bugfixes if necessary. PCRE2 releases start at 10.0 to avoid confusion with PCRE1. @@ -52,7 +52,7 @@ unrelated to those mentioned above), I tried at first to invent an algorithm that used an amount of store bounded by a multiple of the number of characters in the pattern, to save on compiling time. However, because of the greater complexity in Perl regular expressions, I couldn't do this. In any case, a -first pass through the pattern is helpful for other reasons. +first pass through the pattern is helpful for other reasons. Support for 16-bit and 32-bit data strings @@ -62,7 +62,7 @@ The library can be compiled in any combination of 8-bit, 16-bit or 32-bit modes, creating up to three different libraries. In the description that follows, the word "short" is used for a 16-bit data quantity, and the phrase "code unit" is used for a quantity that is a byte in 8-bit mode, a short in -16-bit mode and a 32-bit word in 32-bit mode. The names of PCRE2 functions are +16-bit mode and a 32-bit word in 32-bit mode. The names of PCRE2 functions are given in generic form, without a _8, _16, or _32 suffix. @@ -88,8 +88,8 @@ a "fake" mode that enables it to compute how much memory it would need, while actually only ever using a few hundred bytes of working memory, and without too many tests of the mode that might slow it down. So I refactored the compiling functions to work this way. This got rid of about 600 lines of source. It -should make future maintenance and development easier. As this was such a major -change, I never released 6.8, instead upping the number to 7.0 (other quite +should make future maintenance and development easier. As this was such a major +change, I never released 6.8, instead upping the number to 7.0 (other quite major changes were also present in the 7.0 release). A side effect of this work was that the previous limit of 200 on the nesting @@ -127,7 +127,7 @@ compiled pattern data as pcre2_match(); however, not all the facilities are available, and those that are do not always work in quite the same way. See the user documentation for details. -The algorithm that is used for pcre2_dfa_match() is not a traditional FSM, +The algorithm that is used for pcre2_dfa_match() is not a traditional FSM, because it may have a number of states active at one time. More work would be needed at compile time to produce a traditional FSM where only one state is ever active at once. I believe some other regex matchers work this way. JIT @@ -177,7 +177,7 @@ These items are all just one unit long OP_ANYBYTE match any single code unit, even in UTF-8/16 mode OP_SOD match start of data: \A OP_SOM, start of match (subject + offset): \G - OP_SET_SOM, set start of match (\K) + OP_SET_SOM, set start of match (\K) OP_CIRC ^ (start of data) OP_CIRCM ^ multiline mode (start of data or after newline) OP_NOT_WORD_BOUNDARY \W @@ -185,31 +185,31 @@ These items are all just one unit long OP_NOT_DIGIT \D OP_DIGIT \d OP_NOT_HSPACE \H - OP_HSPACE \h + OP_HSPACE \h OP_NOT_WHITESPACE \S OP_WHITESPACE \s OP_NOT_VSPACE \V - OP_VSPACE \v + OP_VSPACE \v OP_NOT_WORDCHAR \W OP_WORDCHAR \w OP_EODN match end of data or newline at end: \Z OP_EOD match end of data: \z OP_DOLL $ (end of data, or before final newline) OP_DOLLM $ multiline mode (end of data or before newline) - OP_EXTUNI match an extended Unicode grapheme cluster - OP_ANYNL match any Unicode newline sequence - + OP_EXTUNI match an extended Unicode grapheme cluster + OP_ANYNL match any Unicode newline sequence + OP_ASSERT_ACCEPT ) - OP_ACCEPT ) These are Perl 5.10's "backtracking control + OP_ACCEPT ) These are Perl 5.10's "backtracking control OP_COMMIT ) verbs". If OP_ACCEPT is inside capturing OP_FAIL ) parentheses, it may be preceded by one or more OP_PRUNE ) OP_CLOSE, each followed by a count that OP_SKIP ) indicates which parentheses must be closed. OP_THEN ) - -OP_ASSERT_ACCEPT is used when (*ACCEPT) is encountered within an assertion. -This ends the assertion, not the entire pattern match. - + +OP_ASSERT_ACCEPT is used when (*ACCEPT) is encountered within an assertion. +This ends the assertion, not the entire pattern match. + Backtracking control verbs with optional data --------------------------------------------- @@ -219,12 +219,12 @@ OP_MARK is followed by the mark name, preceded by a length in one code unit, and followed by a binary zero. For (*PRUNE), (*SKIP), and (*THEN) with arguments, the opcodes OP_PRUNE_ARG, OP_SKIP_ARG, and OP_THEN_ARG are used, with the name following in the same format as OP_MARK. - + Matching literal characters --------------------------- -The OP_CHAR opcode is followed by a single character that is to be matched +The OP_CHAR opcode is followed by a single character that is to be matched casefully. For caseless matching, OP_CHARI is used. In UTF-8 or UTF-16 modes, the character may be more than one code unit long. In UTF-32 mode, characters are always exactly one code unit long. @@ -241,32 +241,35 @@ The common repeats (*, +, ?), when applied to a single character, use the following opcodes, which come in caseful and caseless versions: Caseful Caseless - OP_STAR OP_STARI - OP_MINSTAR OP_MINSTARI - OP_POSSTAR OP_POSSTARI - OP_PLUS OP_PLUSI - OP_MINPLUS OP_MINPLUSI - OP_POSPLUS OP_POSPLUSI - OP_QUERY OP_QUERYI - OP_MINQUERY OP_MINQUERYI - OP_POSQUERY OP_POSQUERYI + OP_STAR OP_STARI + OP_MINSTAR OP_MINSTARI + OP_POSSTAR OP_POSSTARI + OP_PLUS OP_PLUSI + OP_MINPLUS OP_MINPLUSI + OP_POSPLUS OP_POSPLUSI + OP_QUERY OP_QUERYI + OP_MINQUERY OP_MINQUERYI + OP_POSQUERY OP_POSQUERYI Each opcode is followed by the character that is to be repeated. In ASCII or UTF-32 modes, these are two-code-unit items; in UTF-8 or UTF-16 modes, the length is variable. Those with "MIN" in their names are the minimizing -versions. Those with "POS" in their names are possessive versions. Other kinds +versions. Those with "POS" in their names are possessive versions. Other kinds of repeat make use of these opcodes: Caseful Caseless - OP_UPTO OP_UPTOI - OP_MINUPTO OP_MINUPTOI - OP_POSUPTO OP_POSUPTOI - OP_EXACT OP_EXACTI + OP_UPTO OP_UPTOI + OP_MINUPTO OP_MINUPTOI + OP_POSUPTO OP_POSUPTOI + OP_EXACT OP_EXACTI -Each of these is followed by a count and then the repeated character. OP_UPTO -matches from 0 to the given number. A repeat with a non-zero minimum and a -fixed maximum is coded as an OP_EXACT followed by an OP_UPTO (or OP_MINUPTO or -OPT_POSUPTO). +Each of these is followed by a count and then the repeated character. The count +is two bytes long in 8-bit mode (most significant byte first), or one code unit +in 16-bit and 32-bit modes. + +OP_UPTO matches from 0 to the given number. A repeat with a non-zero minimum +and a fixed maximum is coded as an OP_EXACT followed by an OP_UPTO (or +OP_MINUPTO or OPT_POSUPTO). Another set of matching repeating opcodes (called OP_NOTSTAR, OP_NOTSTARI, etc.) are used for repeated, negated, single-character classes such as [^a]*. @@ -283,23 +286,23 @@ in the next code unit. The opcodes are: OP_TYPESTAR OP_TYPEMINSTAR - OP_TYPEPOSSTAR + OP_TYPEPOSSTAR OP_TYPEPLUS OP_TYPEMINPLUS - OP_TYPEPOSPLUS + OP_TYPEPOSPLUS OP_TYPEQUERY OP_TYPEMINQUERY - OP_TYPEPOSQUERY + OP_TYPEPOSQUERY OP_TYPEUPTO OP_TYPEMINUPTO - OP_TYPEPOSUPTO + OP_TYPEPOSUPTO OP_TYPEEXACT Match by Unicode property ------------------------- -OP_PROP and OP_NOTPROP are used for positive and negative matches of a +OP_PROP and OP_NOTPROP are used for positive and negative matches of a character by testing its Unicode property (the \p and \P escape sequences). Each is followed by two code units that encode the desired property as a type and a value. The types are a set of #defines of the form PT_xxx, and the values @@ -317,7 +320,7 @@ Character classes If there is only one character in a class, OP_CHAR or OP_CHARI is used for a positive class, and OP_NOT or OP_NOTI for a negative one (that is, for -something like [^a]). +something like [^a]). A set of repeating opcodes (called OP_NOTSTAR etc.) are used for repeated, negated, single-character classes. The normal single-character opcodes @@ -325,35 +328,41 @@ negated, single-character classes. The normal single-character opcodes When there is more than one character in a class, and all the code points are less than 256, OP_CLASS is used for a positive class, and OP_NCLASS for a -negative one. In either case, the opcode is followed by a 32-byte (16-short, +negative one. In either case, the opcode is followed by a 32-byte (16-short, 8-word) bit map containing a 1 bit for every character that is acceptable. The bits are counted from the least significant end of each unit. In caseless mode, bits for both cases are set. -The reason for having both OP_CLASS and OP_NCLASS is so that, in UTF-8/16/32 -mode, subject characters with values greater than 255 can be handled correctly. -For OP_CLASS they do not match, whereas for OP_NCLASS they do. +The reason for having both OP_CLASS and OP_NCLASS is so that, in UTF-8 and +16-bit and 32-bit modes, subject characters with values greater than 255 can be +handled correctly. For OP_CLASS they do not match, whereas for OP_NCLASS they +do. -For classes containing characters with values greater than 255 or that contain -\p or \P, OP_XCLASS is used. It optionally uses a bit map if any code points -are less than 256, followed by a list of pairs (for a range) and single -characters. In caseless mode, both cases are explicitly listed. +For classes containing characters with values greater than 255 or that contain +\p or \P, OP_XCLASS is used. It optionally uses a bit map if any acceptable +code points are less than 256, followed by a list of pairs (for a range) and +single characters. In caseless mode, both cases are explicitly listed. -OP_XCLASS is followed by a code unit containing flag bits: XCL_NOT indicates -that this is a negative class, and XCL_MAP indicates that a bit map is present. -There follows the bit map, if XCL_MAP is set, and then a sequence of items -coded as follows: +OP_XCLASS is followed by a LINK_SIZE item containing the total length of the +opcode and its data. This is followed by a code unit containing flag bits: +XCL_NOT indicates that this is a negative class, and XCL_MAP indicates that a +bit map is present. There follows the bit map, if XCL_MAP is set, and then a +sequence of items coded as follows: XCL_END marks the end of the list XCL_SINGLE one character follows XCL_RANGE two characters follow - XCL_PROP a Unicode property (type, value) follows - XCL_NOTPROP a Unicode property (type, value) follows + XCL_PROP a Unicode property (type, value) follows + XCL_NOTPROP a Unicode property (type, value) follows -If a range starts with a code point less than 256 and ends with one greater -than 256, it is split into two ranges, with characters less than 256 being +If a range starts with a code point less than 256 and ends with one greater +than 256, it is split into two ranges, with characters less than 256 being indicated in the bit map, and the rest with XCL_RANGE. +When XCL_NOT is set, the bit map, if present, contains bits for characters that +are allowed (exactly as for OP_NCLASS), but the list of items that follow it +specifies characters and properties that are not allowed. + Back references --------------- @@ -364,7 +373,7 @@ number or by name). When named groups are used, there may be more than one group with the same name. In this case, a reference to such a group by name generates OP_DNREF or OP_DNREFI. These are followed by two counts: the index (not the byte offset) in the group name table of the first entry for the -required name, followed by the number of groups with the same name. The +required name, followed by the number of groups with the same name. The matching code can then search for the first one that is set. @@ -378,16 +387,16 @@ opcode to see if it is one of these: OP_CRSTAR OP_CRMINSTAR - OP_CRPOSSTAR + OP_CRPOSSTAR OP_CRPLUS OP_CRMINPLUS - OP_CRPOSPLUS + OP_CRPOSPLUS OP_CRQUERY OP_CRMINQUERY - OP_CRPOSQUERY + OP_CRPOSQUERY OP_CRRANGE OP_CRMINRANGE - OP_CRPOSRANGE + OP_CRPOSRANGE All but the last three are single-code-unit items, with no data. The others are followed by the minimum and maximum repeat counts. @@ -400,14 +409,14 @@ A pair of non-capturing round brackets is wrapped round each expression at compile time, so alternation always happens in the context of brackets. [Note for North Americans: "bracket" to some English speakers, including -myself, can be round, square, curly, or pointy. Hence this usage rather than +myself, can be round, square, curly, or pointy. Hence this usage rather than "parentheses".] Non-capturing brackets use the opcode OP_BRA, capturing brackets use OP_CBRA. A bracket opcode is followed by LINK_SIZE bytes which give the offset to the next alternative OP_ALT or, if there aren't any branches, to the matching OP_KET opcode. Each OP_ALT is followed by LINK_SIZE bytes giving the offset to -the next one, or to the OP_KET opcode. For capturing brackets, the bracket +the next one, or to the OP_KET opcode. For capturing brackets, the bracket number is a count that immediately follows the offset. OP_KET is used for subpatterns that do not repeat indefinitely, and OP_KETRMIN @@ -419,8 +428,8 @@ bracket opcode. If a subpattern is quantified such that it is permitted to match zero times, it is preceded by one of OP_BRAZERO, OP_BRAMINZERO, or OP_SKIPZERO. These are single-unit opcodes that tell the matcher that skipping the following -subpattern entirely is a valid branch. In the case of the first two, not -skipping the pattern is also valid (greedy and non-greedy). The third is used +subpattern entirely is a valid branch. In the case of the first two, not +skipping the pattern is also valid (greedy and non-greedy). The third is used when a pattern has the quantifier {0,0}. It cannot be entirely discarded, because it may be called as a subroutine from elsewhere in the pattern. @@ -432,11 +441,11 @@ as appropriate. A subpattern with a bounded maximum repetition is replicated in a nested fashion up to the maximum number of times, with OP_BRAZERO or OP_BRAMINZERO before each replication after the minimum, so that, for example, (abc){2,5} is -compiled as (abc)(abc)((abc)((abc)(abc)?)?)?, except that each bracketed group +compiled as (abc)(abc)((abc)((abc)(abc)?)?)?, except that each bracketed group has the same number. -When a repeated subpattern has an unbounded upper limit, it is checked to see -whether it could match an empty string. If this is the case, the opcode in the +When a repeated subpattern has an unbounded upper limit, it is checked to see +whether it could match an empty string. If this is the case, the opcode in the final replication is changed to OP_SBRA or OP_SCBRA. This tells the matcher that it needs to check for matching an empty string when it hits OP_KETRMIN or OP_KETRMAX, and if so, to break the loop. @@ -447,8 +456,8 @@ Possessive brackets When a repeated group (capturing or non-capturing) is marked as possessive by the "+" notation, e.g. (abc)++, different opcodes are used. Their names all -have POS on the end, e.g. OP_BRAPOS instead of OP_BRA and OP_SCBRAPOS instead -of OP_SCBRA. The end of such a group is marked by OP_KETRPOS. If the minimum +have POS on the end, e.g. OP_BRAPOS instead of OP_BRA and OP_SCBRAPOS instead +of OP_SCBRA. The end of such a group is marked by OP_KETRPOS. If the minimum repetition is zero, the group is preceded by OP_BRAPOSZERO. @@ -456,12 +465,12 @@ Once-only (atomic) groups ------------------------- These are just like other subpatterns, but they start with the opcode -OP_ONCE or OP_ONCE_NC. The former is used when there are no capturing brackets -within the atomic group; the latter when there are. The distinction is needed -for when there is a backtrack to before the group - any captures within the +OP_ONCE or OP_ONCE_NC. The former is used when there are no capturing brackets +within the atomic group; the latter when there are. The distinction is needed +for when there is a backtrack to before the group - any captures within the group must be reset, so it is necessary to retain backtracking points inside -the group, even after it is complete, in order to do this. When there are no -captures in an atomic group, all the backtracking can be discarded when it is +the group, even after it is complete, in order to do this. When there are no +captures in an atomic group, all the backtracking can be discarded when it is complete. This is more efficient, and also uses less stack. The check for matching an empty string in an unbounded repeat is handled @@ -485,7 +494,7 @@ Conditional subpatterns ----------------------- These are like other subpatterns, but they start with the opcode OP_COND, or -OP_SCOND for one that might match an empty string in an unbounded repeat. +OP_SCOND for one that might match an empty string in an unbounded repeat. If the condition is a back reference, this is stored at the start of the subpattern using the opcode OP_CREF followed by a count containing the @@ -500,17 +509,17 @@ group x" (coded as "(?(Rx)"), the group number is stored at the start of the subpattern using the opcode OP_RREF (with a value of RREF_ANY (0xffff) for "the whole pattern") or OP_DNRREF (with data as for OP_DNCREF). -For a DEFINE condition, OP_FALSE is used (with no associated data). During -compilation, however, a DEFINE condition is coded as OP_DEFINE so that, when -the conditional group is complete, there can be a check to ensure that it -contains only one top-level branch. Once this has happened, the opcode is +For a DEFINE condition, OP_FALSE is used (with no associated data). During +compilation, however, a DEFINE condition is coded as OP_DEFINE so that, when +the conditional group is complete, there can be a check to ensure that it +contains only one top-level branch. Once this has happened, the opcode is changed to OP_FALSE, so the matcher never sees OP_DEFINE. There is a special PCRE2-specific condition of the form (VERSION[>]=x.y), which -tests the PCRE2 version number. This compiles into one of the opcodes OP_TRUE +tests the PCRE2 version number. This compiles into one of the opcodes OP_TRUE or OP_FALSE. -If a condition is not a back reference, recursion test, DEFINE, or VERSION, it +If a condition is not a back reference, recursion test, DEFINE, or VERSION, it must start with an assertion, whose opcode immediately follows OP_COND or OP_SCOND. @@ -540,9 +549,9 @@ information using automatic callouts. Opcode table checking --------------------- -The last opcode that is defined in pcre2_internal.h is OP_TABLE_LENGTH. This is -not a real opcode, but is used to check that tables indexed by opcode are the +The last opcode that is defined in pcre2_internal.h is OP_TABLE_LENGTH. This is +not a real opcode, but is used to check that tables indexed by opcode are the correct length, in order to catch updating errors. Philip Hazel -August 2014 +February 2015