Final file tidies for 10.32

LICENCE

@@ -4,11 +4,11 @@ PCRE2 LICENCE
 PCRE2 is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 
-Release 10 of PCRE2 is distributed under the terms of the "BSD" licence, as
-specified below, with one exemption for certain binary redistributions. The
-documentation for PCRE2, supplied in the "doc" directory, is distributed under
-the same terms as the software itself. The data in the testdata directory is
-not copyrighted and is in the public domain.
+Releases 10.00 and above of PCRE2 are distributed under the terms of the "BSD"
+licence, as specified below, with one exemption for certain binary
+redistributions. The documentation for PCRE2, supplied in the "doc" directory,
+is distributed under the same terms as the software itself. The data in the
+testdata directory is not copyrighted and is in the public domain.
 
 The basic library functions are written in C and are freestanding. Also
 included in the distribution is a just-in-time compiler that can be used to

NEWS

@@ -1,11 +1,12 @@
 News about PCRE2 releases
 -------------------------
 
-Version 10.32 13-August-2018
-----------------------------
+
+Version 10.32 10-September-2018
+-------------------------------
 
 This is another mainly bugfix and tidying release with a few minor
-enhancements.
+enhancements. These are the main ones:
 
 1. pcre2grep now supports the inclusion of binary zeros in patterns that are
 read from files via the -f option.
@@ -22,7 +23,7 @@ parameter now applies to pcre2_dfa_match().
 
 5. (*ACCEPT:ARG), (*FAIL:ARG), and (*COMMIT:ARG) are now supported.
 
-6. Added support for \N{U+dddd}, but not in EBCDIC environments.
+6. Added support for \N{U+dddd}, but only in Unicode mode.
 
 7. Added support for (?^) to unset all imnsx options.
 

configure.ac

@@ -10,8 +10,8 @@ dnl be defined as -RC2, for example. For real releases, it should be empty.
 
 m4_define(pcre2_major, [10])
 m4_define(pcre2_minor, [32])
-m4_define(pcre2_prerelease, [-RC1])
-m4_define(pcre2_date, [2018-08-13])
+m4_define(pcre2_prerelease, [])
+m4_define(pcre2_date, [2018-09-10])
 
 # NOTE: The CMakeLists.txt file searches for the above variables in the first
 # 50 lines of this file. Please update that if the variables above are moved.
@@ -839,7 +839,7 @@ AC_SUBST(EXTRA_LIBPCRE2_POSIX_LDFLAGS)
 
 # When we run 'make distcheck', use these arguments. Turning off compiler
 # optimization makes it run faster.
-DISTCHECK_CONFIGURE_FLAGS="CFLAGS='' CXXFLAGS='' --enable-pcre2-16 --enable-pcre2-32 --enable-jit --enable-utf"
+DISTCHECK_CONFIGURE_FLAGS="CFLAGS='' CXXFLAGS='' --enable-pcre2-16 --enable-pcre2-32 --enable-jit"
 AC_SUBST(DISTCHECK_CONFIGURE_FLAGS)
 
 # Check that, if --enable-pcre2grep-libz or --enable-pcre2grep-libbz2 is

doc/html/pcre2api.html

@@ -1804,7 +1804,8 @@ Unicode support (which is the default). If Unicode support is not available,
 the use of this option provokes an error. Details of how PCRE2_UTF changes the
 behaviour of PCRE2 are given in the
 <a href="pcre2unicode.html"><b>pcre2unicode</b></a>
-page.
+page. In particular, note that it changes the way PCRE2_CASELESS handles
+characters with code points greater than 127.
 <a name="extracompileoptions"></a></P>
 <br><b>
 Extra compile options
@@ -2776,7 +2777,7 @@ Elements in the ovector that do not correspond to capturing parentheses in the
 pattern are never changed. That is, if a pattern contains <i>n</i> capturing
 parentheses, no more than <i>ovector[0]</i> to <i>ovector[2n+1]</i> are set by
 <b>pcre2_match()</b>. The other elements retain whatever values they previously
-had.
+had. After a failed match attempt, the contents of the ovector are unchanged.
 <a name="matchotherdata"></a></P>
 <br><a name="SEC30" href="#TOC1">OTHER INFORMATION ABOUT A MATCH</a><br>
 <P>
@@ -3192,6 +3193,12 @@ functions from the match context, if provided, or else those that were used to
 allocate memory for the compiled code.
 </P>
 <P>
+If an external <i>match_data</i> block is provided, its contents afterwards
+are those set by the final call to <b>pcre2_match()</b>, which will have
+ended in a matching error. The contents of the ovector within the match data
+block may or may not have been changed.
+</P>
+<P>
 The <i>outlengthptr</i> argument must point to a variable that contains the
 length, in code units, of the output buffer. If the function is successful, the
 value is updated to contain the length of the new string, excluding the
@@ -3658,7 +3665,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC42" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 03 August 2018
+Last updated: 07 September 2018
 <br>
 Copyright &copy; 1997-2018 University of Cambridge.
 <br>

doc/html/pcre2pattern.html

@@ -399,14 +399,15 @@ these escapes are as follows:
   \ddd        character with octal code ddd, or backreference
   \o{ddd..}   character with octal code ddd..
   \xhh        character with hex code hh
-  \x{hhh..}   character with hex code hhh.. (default mode)
-  \N{U+hhh..} character with Unicode code point hhh..
+  \x{hhh..}   character with hex code hhh..
+  \N{U+hhh..} character with Unicode hex code point hhh..
   \uhhhh      character with hex code hhhh (when PCRE2_ALT_BSUX is set)
 </pre>
+The \N{U+hhh..} escape sequence is recognized only when the PCRE2_UTF option
+is set, that is, when PCRE2 is operating in a Unicode mode. Perl also uses
+\N{name} to specify characters by Unicode name; PCRE2 does not support this.
 Note that when \N is not followed by an opening brace (curly bracket) it has
 an entirely different meaning, matching any character that is not a newline.
-Perl also uses \N{name} to specify characters by Unicode name; PCRE2 does not
-support this.
 </P>
 <P>
 The precise effect of \cx on ASCII characters is as follows: if x is a lower
@@ -530,7 +531,8 @@ limited to certain values, as follows:
 Invalid Unicode code points are all those in the range 0xd800 to 0xdfff (the
 so-called "surrogate" code points). The check for these can be disabled by the
 caller of <b>pcre2_compile()</b> by setting the option
-PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES.
+PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES. However, this is possible only in UTF-8
+and UTF-32 modes, because these values are not representable in UTF-16.
 </P>
 <br><b>
 Escape sequences in character classes
@@ -3595,13 +3597,16 @@ verbs in subroutines is different in some cases.
 an immediate backtrack.
 </P>
 <P>
-(*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine cause
-the subroutine match to fail.
+(*COMMIT), (*SKIP), and (*PRUNE) cause the subroutine match to fail when
+triggered by being backtracked to in a subpattern called as a subroutine. There
+is then a backtrack at the outer level.
 </P>
 <P>
-(*THEN) skips to the next alternative in the innermost enclosing group within
-the subpattern that has alternatives. If there is no such group within the
-subpattern, (*THEN) causes the subroutine match to fail.
+(*THEN), when triggered, skips to the next alternative in the innermost
+enclosing group within the subpattern that has alternatives (its normal
+behaviour). However, if there is no such group within the subroutine
+subpattern, the subroutine match fails and there is a backtrack at the outer
+level.
 </P>
 <br><a name="SEC28" href="#TOC1">SEE ALSO</a><br>
 <P>
@@ -3619,7 +3624,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC30" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 03 August 2018
+Last updated: 04 September 2018
 <br>
 Copyright &copy; 1997-2018 University of Cambridge.
 <br>

doc/html/pcre2syntax.html

@@ -70,7 +70,7 @@ This table applies to ASCII and Unicode environments.
   \ddd       character with octal code ddd, or backreference
   \o{ddd..}  character with octal code ddd..
   \U         "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
-  \N{U+hh..} character with Unicode code point hh..
+  \N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
   \uhhhh     character with hex code hhhh (if PCRE2_ALT_BSUX is set)
   \xhh       character with hex code hh
   \x{hh..}   character with hex code hh..
@@ -634,7 +634,7 @@ Cambridge, England.
 </P>
 <br><a name="SEC27" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 01 August 2018
+Last updated: 02 September 2018
 <br>
 Copyright &copy; 1997-2018 University of Cambridge.
 <br>

doc/html/pcre2unicode.html

@@ -26,7 +26,8 @@ you must call
 with the PCRE2_UTF option flag, or the pattern must start with the sequence
 (*UTF). When either of these is the case, both the pattern and any subject
 strings that are matched against it are treated as UTF strings instead of
-strings of individual one-code-unit characters.
+strings of individual one-code-unit characters. There are also some other
+changes to the way characters are handled, as documented below.
 </P>
 <P>
 If you do not need Unicode support you can build PCRE2 without it, in which
@@ -59,6 +60,11 @@ values have to use braced sequences. Unbraced octal code points up to \777 are
 also recognized; larger ones can be coded using \o{...}.
 </P>
 <P>
+The escape sequence \N{U+&#60;hex digits&#62;} is recognized as another way of
+specifying a Unicode character by code point in a UTF mode. It is not allowed
+in non-UTF modes.
+</P>
+<P>
 In UTF modes, repeat quantifiers apply to complete UTF characters, not to
 individual code units.
 </P>
@@ -294,9 +300,9 @@ Cambridge, England.
 REVISION
 </b><br>
 <P>
-Last updated: 17 May 2017
+Last updated: 02 September 2018
 <br>
-Copyright &copy; 1997-2017 University of Cambridge.
+Copyright &copy; 1997-2018 University of Cambridge.
 <br>
 <p>
 Return to the <a href="index.html">PCRE2 index page</a>.

src/config.h.generic

@@ -214,7 +214,7 @@ sure both macros are undefined; an emulation function will then be used. */
 #define PACKAGE_NAME "PCRE2"
 
 /* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE2 10.32-RC1"
+#define PACKAGE_STRING "PCRE2 10.32"
 
 /* Define to the one symbol short name of this package. */
 #define PACKAGE_TARNAME "pcre2"
@@ -223,7 +223,7 @@ sure both macros are undefined; an emulation function will then be used. */
 #define PACKAGE_URL ""
 
 /* Define to the version of this package. */
-#define PACKAGE_VERSION "10.32-RC1"
+#define PACKAGE_VERSION "10.32"
 
 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
    parentheses (of any kind) in a pattern. This limits the amount of system
@@ -343,7 +343,7 @@ sure both macros are undefined; an emulation function will then be used. */
 #endif
 
 /* Version number of package */
-#define VERSION "10.32-RC1"
+#define VERSION "10.32"
 
 /* Define to 1 if on MINIX. */
 /* #undef _MINIX */

src/pcre2.h.generic

@@ -43,8 +43,8 @@ POSSIBILITY OF SUCH DAMAGE.
 
 #define PCRE2_MAJOR           10
 #define PCRE2_MINOR           32
-#define PCRE2_PRERELEASE      -RC1
-#define PCRE2_DATE            2018-08-13
+#define PCRE2_PRERELEASE      
+#define PCRE2_DATE            2018-09-10
 
 /* For the benefit of systems without stdint.h, an alternative is to use
 inttypes.h. The existence of these headers is checked by configure or CMake. */
@@ -316,7 +316,7 @@ pcre2_pattern_convert(). */
 #define PCRE2_ERROR_INTERNAL_BAD_CODE_IN_SKIP      190
 #define PCRE2_ERROR_NO_SURROGATES_IN_UTF16         191
 #define PCRE2_ERROR_BAD_LITERAL_OPTIONS            192
-#define PCRE2_ERROR_NOT_SUPPORTED_IN_EBCDIC        193
+#define PCRE2_ERROR_SUPPORTED_ONLY_IN_UNICODE      193
 #define PCRE2_ERROR_INVALID_HYPHEN_IN_OPTIONS      194