PCRE2_ANCHORED Match only at the first position PCRE2_ENDANCHORED Pattern can match only at end of subject diff --git a/doc/html/pcre2api.html b/doc/html/pcre2api.html index 98323c6..7df6d49 100644 --- a/doc/html/pcre2api.html +++ b/doc/html/pcre2api.html @@ -329,7 +329,7 @@ document for an overview of all the PCRE2 documentation. void (*private_free)(void *, void *), void *memory_data);A compile context is also required if you are using custom memory management. If none of these apply, just pass NULL as the context argument of @@ -757,9 +757,9 @@ in the current locale.
-These functions became obsolete at release 10.30 and are retained only for +These functions became obsolete at release 10.30 and are retained only for backward compatibility. They should not be used in new code. The first is replaced by pcre2_set_depth_limit(); the second is no longer needed and has no effect (it always returns zero). @@ -428,10 +428,10 @@ documentation, and the documentation describes how to compile and run it.-The compiling and matching functions recognize various options that are passed -as bits in an options argument. There are also some more complicated parameters -such as custom memory management functions and resource limits that are passed -in "contexts" (which are just memory blocks, described below). Simple +The compiling and matching functions recognize various options that are passed +as bits in an options argument. There are also some more complicated parameters +such as custom memory management functions and resource limits that are passed +in "contexts" (which are just memory blocks, described below). Simple applications do not need to make use of contexts.
@@ -450,7 +450,7 @@ More complicated programs might need to make use of the specialist functions
JIT matching is automatically used by pcre2_match() if it is available, unless the PCRE2_NO_JIT option is set. There is also a direct interface for JIT -matching, which gives improved performance at the expense of less sanity +matching, which gives improved performance at the expense of less sanity checking. The JIT-specific functions are discussed in the pcre2jit documentation. @@ -705,7 +705,7 @@ following compile-time parameters: The newline character sequence The compile time nested parentheses limit The maximum length of the pattern string - The extra options bits (none set by default) + The extra options bits (none set by default)
@@ -837,7 +837,7 @@ A match context is required if you want to:
Set up a callout function Set an offset limit for matching an unanchored pattern - Change the limit on the amount of heap used when matching + Change the limit on the amount of heap used when matching Change the backtracking match limit Change the backtracking depth limit Set custom memory management specifically for the match @@ -908,15 +908,15 @@ In other words, whichever limit comes first is used. uint32_t value);where ddd is a decimal number. However, such a setting is ignored unless ddd is -less than the limit set by the caller of pcre2_match() or, if no such -limit is set, less than the default. +less than the limit set by the caller of pcre2_match() or +pcre2_dfa_match() or, if no such limit is set, less than the default.
-The heap_limit parameter specifies, in units of kilobytes, the maximum +The heap_limit parameter specifies, in units of kilobytes, the maximum amount of heap memory that pcre2_match() may use to hold backtracking information when running an interpretive match. This limit does not apply to matching with the JIT optimization, which has its own memory control arrangements (see the pcre2jit documentation for more details), nor does it apply to pcre2_dfa_match(). -If the limit is reached, the negative error code PCRE2_ERROR_HEAPLIMIT is -returned. The default limit is set when PCRE2 is built; the default default is +If the limit is reached, the negative error code PCRE2_ERROR_HEAPLIMIT is +returned. The default limit is set when PCRE2 is built; the default default is very large and is essentially "unlimited".@@ -932,11 +932,11 @@ limit is set, less than the default.
The pcre2_match() function starts out using a 20K vector on the system stack for recording backtracking points. The more nested backtracking points -there are (that is, the deeper the search tree), the more memory is needed. -Heap memory is used only if the initial vector is too small. If the heap limit -is set to a value less than 21 (in particular, zero) no heap memory will be -used. In this case, only patterns that do not have a lot of nested backtracking -can be successfully processed. +there are (that is, the deeper the search tree), the more memory is needed. +Heap memory is used only if the initial vector is too small. If the heap limit +is set to a value less than 21 (in particular, zero) no heap memory will be +used. In this case, only patterns that do not have a lot of nested backtracking +can be successfully processed.
int pcre2_set_match_limit(pcre2_match_context *mcontext, @@ -954,8 +954,8 @@ time round its main matching loop. If this value reaches the match limit, pcre2_match() returns the negative value PCRE2_ERROR_MATCHLIMIT. This has the effect of limiting the amount of backtracking that can take place. For patterns that are not anchored, the count restarts from zero for each position -in the subject string. This limit is not relevant to pcre2_dfa_match(), -which ignores it. +in the subject string. This limit also applies to pcre2_dfa_match(), +though the counting is done in a different way.When pcre2_match() is called with a pattern that was successfully @@ -974,8 +974,8 @@ of the form (*LIMIT_MATCH=ddd)
PCRE2_DOLLAR_ENDONLY @@ -1391,11 +1391,11 @@ documentation. PCRE2_ENDANCHOREDIf this bit is set, the end of any pattern match must be right at the end of -the string being searched (the "subject string"). If the pattern match -succeeds by reaching (*ACCEPT), but does not reach the end of the subject, the -match fails at the current starting point. For unanchored patterns, a new match -is then tried at the next starting point. However, if the match succeeds by -reaching the end of the pattern, but not the end of the subject, backtracking +the string being searched (the "subject string"). If the pattern match +succeeds by reaching (*ACCEPT), but does not reach the end of the subject, the +match fails at the current starting point. For unanchored patterns, a new match +is then tried at the next starting point. However, if the match succeeds by +reaching the end of the pattern, but not the end of the subject, backtracking occurs and an alternative match may be found. Consider these two patterns:
.(*ACCEPT)|.. @@ -1407,9 +1407,9 @@ achieved by appropriate constructs in the pattern itself, which is the only way to do it in Perl.-For DFA matching with pcre2_dfa_match(), PCRE2_ENDANCHORED applies only +For DFA matching with pcre2_dfa_match(), PCRE2_ENDANCHORED applies only to the first (that is, the longest) matched string. Other parallel matches, -which are necessarily substrings of the first one, must obviously end before +which are necessarily substrings of the first one, must obviously end before the end of the subject.
PCRE2_EXTENDED @@ -1584,7 +1584,7 @@ current starting position, which in this case, it does. However, if the same match is run with PCRE2_NO_START_OPTIMIZE set, the initial scan along the subject string does not happen. The first match attempt is run starting from "D" and when this fails, (*COMMIT) prevents any further matches being tried, so -the overall result is "no match". +the overall result is "no match".There are also other start-up optimizations. For example, a minimum length for @@ -1610,13 +1610,13 @@ and in the pcre2unicode document. If an invalid UTF sequence is found, pcre2_compile() returns a -negative error code. +negative error code.
If you know that your pattern is a valid UTF string, and you want to skip this check for performance reasons, you can set the PCRE2_NO_UTF_CHECK option. When it is set, the effect of passing an invalid UTF string as a pattern is -undefined. It may cause your program to crash or loop. +undefined. It may cause your program to crash or loop.
Note that this option can also be passed to pcre2_match() and @@ -1685,13 +1685,13 @@ calling the pcre2_set_compile_extra_options() function are as follows:
PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES-This option applies when compiling a pattern in UTF-8 or UTF-32 mode. It is +This option applies when compiling a pattern in UTF-8 or UTF-32 mode. It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode "surrogate" code points in the range 0xd800 to 0xdfff are used in pairs in UTF-16 to encode -code points with values in the range 0x10000 to 0x10ffff. The surrogates cannot +code points with values in the range 0x10000 to 0x10ffff. The surrogates cannot therefore be represented in UTF-16. They can be represented in UTF-8 and -UTF-32, but are defined as invalid code points, and cause errors if encountered -in a UTF-8 or UTF-32 string that is being checked for validity by PCRE2. +UTF-32, but are defined as invalid code points, and cause errors if encountered +in a UTF-8 or UTF-32 string that is being checked for validity by PCRE2.These values also cause errors if encountered in escape sequences such as @@ -1702,9 +1702,9 @@ not disable the error that occurs, because it applies only to the testing of input strings for UTF validity.
-If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surrogate code -point values in UTF-8 and UTF-32 patterns no longer provoke errors and are -incorporated in the compiled pattern. However, they can only match subject +If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surrogate code +point values in UTF-8 and UTF-32 patterns no longer provoke errors and are +incorporated in the compiled pattern. However, they can only match subject characters if the matching function is called with PCRE2_NO_UTF_CHECK set.
COMPILATION ERROR CODES
@@ -1914,7 +1914,7 @@ The third argument should point to an uint32_t variable. If the pattern set a backtracking depth limit by including an item of the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The third argument should point to an unsigned 32-bit integer. If no such value has been set, the -call to pcre2_pattern_info() returns the error PCRE2_ERROR_UNSET. Note +call to pcre2_pattern_info() returns the error PCRE2_ERROR_UNSET. Note that this limit will only be used during matching if it is less than the limit set or defaulted by the caller of the match function.@@ -2123,7 +2123,7 @@ The output is one of the following uint32_t values: PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF) PCRE2_NEWLINE_ANY Any Unicode line ending PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF - PCRE2_NEWLINE_NUL The NUL character (binary zero) + PCRE2_NEWLINE_NUL The NUL character (binary zero)This identifies the character sequence that will be recognized as meaning "newline" while matching. @@ -2334,8 +2334,8 @@ instead of one.If a non-zero starting offset is passed when the pattern is anchored, a single attempt to match at the given offset is made. This can only succeed if the -pattern does not require the match to be at the start of the subject. In other -words, the anchoring must be the result of setting the PCRE2_ANCHORED option or +pattern does not require the match to be at the start of the subject. In other +words, the anchoring must be the result of setting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not by starting the pattern with ^ or \A.
@@ -2508,7 +2508,7 @@ reference, and so advances only by one character after the first failure.An explicit match for CR of LF is either a literal appearance of one of those -characters in the pattern, or one of the \r or \n or equivalent octal or +characters in the pattern, or one of the \r or \n or equivalent octal or hexadecimal escape sequences. Implicit matches such as [^X] do not count, nor does \s, even though it includes CR and LF in the characters that it matches.
@@ -2751,9 +2751,9 @@ The backtracking match limit was reached.PCRE2_ERROR_NOMEMORY-If a pattern contains many nested backtracking points, heap memory is used to -remember them. This error is given when the memory allocation function (default -or custom) fails. Note that a different error, PCRE2_ERROR_HEAPLIMIT, is given +If a pattern contains many nested backtracking points, heap memory is used to +remember them. This error is given when the memory allocation function (default +or custom) fails. Note that a different error, PCRE2_ERROR_HEAPLIMIT, is given if the amount of memory needed exceeds the heap limit.PCRE2_ERROR_NULL @@ -3471,7 +3471,7 @@ Cambridge, England.
REVISION
-Last updated: 26 May 2017 +Last updated: 30 May 2017
Copyright © 1997-2017 University of Cambridge.
diff --git a/doc/html/pcre2build.html b/doc/html/pcre2build.html index 1cef522..94c2c65 100644 --- a/doc/html/pcre2build.html +++ b/doc/html/pcre2build.html @@ -260,9 +260,9 @@ setting such as--with-match-limit=500000-to the configure command. This setting has no effect on the -pcre2_dfa_match() matching function, but it does also limit JIT matching -(though the counting is done differently). +to the configure command. This setting also applies to the +pcre2_dfa_match() matching function, and to JIT matching (though the +counting is done differently).The pcre2_match() function starts out using a 20K vector on the system @@ -554,7 +554,7 @@ Cambridge, England.
REVISION
-Last updated: 10 April 2017 +Last updated: 30 May 2017
Copyright © 1997-2017 University of Cambridge.
diff --git a/doc/html/pcre2pattern.html b/doc/html/pcre2pattern.html index 9679933..3eccb3e 100644 --- a/doc/html/pcre2pattern.html +++ b/doc/html/pcre2pattern.html @@ -204,11 +204,11 @@ still recognized for backwards compatibility.The heap limit applies only when the pcre2_match() interpreter is used for matching. It does not apply to JIT or DFA matching. The match limit is used -(but in a different way) when JIT is being used, but it is not relevant, and is -ignored, when matching with pcre2_dfa_match(). The depth limit is ignored -by JIT but is relevant for DFA matching, which uses function recursion for -recursions within the pattern. In this case, the depth limit controls the -amount of system stack that is used. +(but in a different way) when JIT is being used, or when +pcre2_dfa_match() is called, to limit computing resource usage by those +matching functions. The depth limit is ignored by JIT but is relevant for DFA +matching, which uses function recursion for recursions within the pattern. In +this case, the depth limit controls the amount of system stack that is used.
Newline conventions @@ -3445,7 +3445,7 @@ Cambridge, England.
REVISION
-Last updated: 26 May 2017 +Last updated: 30 May 2017
Copyright © 1997-2017 University of Cambridge.
diff --git a/doc/pcre2.txt b/doc/pcre2.txt index d672333..477ad6f 100644 --- a/doc/pcre2.txt +++ b/doc/pcre2.txt @@ -963,8 +963,8 @@ PCRE2 CONTEXTS limit, pcre2_match() returns the negative value PCRE2_ERROR_MATCHLIMIT. This has the effect of limiting the amount of backtracking that can take place. For patterns that are not anchored, the count restarts from - zero for each position in the subject string. This limit is not rele- - vant to pcre2_dfa_match(), which ignores it. + zero for each position in the subject string. This limit also applies + to pcre2_dfa_match(), though the counting is done in a different way. When pcre2_match() is called with a pattern that was successfully pro- cessed by pcre2_jit_compile(), the way in which matching is executed is @@ -981,8 +981,8 @@ PCRE2 CONTEXTS (*LIMIT_MATCH=ddd) where ddd is a decimal number. However, such a setting is ignored - unless ddd is less than the limit set by the caller of pcre2_match() - or, if no such limit is set, less than the default. + unless ddd is less than the limit set by the caller of pcre2_match() or + pcre2_dfa_match() or, if no such limit is set, less than the default. int pcre2_set_depth_limit(pcre2_match_context *mcontext, uint32_t value); @@ -3350,7 +3350,7 @@ AUTHOR REVISION - Last updated: 26 May 2017 + Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. ------------------------------------------------------------------------------ @@ -3586,9 +3586,9 @@ LIMITING PCRE2 RESOURCE USAGE --with-match-limit=500000 - to the configure command. This setting has no effect on the - pcre2_dfa_match() matching function, but it does also limit JIT match- - ing (though the counting is done differently). + to the configure command. This setting also applies to the + pcre2_dfa_match() matching function, and to JIT matching (though the + counting is done differently). The pcre2_match() function starts out using a 20K vector on the system stack to record backtracking points. The more nested backtracking @@ -3885,7 +3885,7 @@ AUTHOR REVISION - Last updated: 10 April 2017 + Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. ------------------------------------------------------------------------------ @@ -5751,22 +5751,23 @@ SPECIAL START-OF-PATTERN ITEMS The heap limit applies only when the pcre2_match() interpreter is used for matching. It does not apply to JIT or DFA matching. The match limit - is used (but in a different way) when JIT is being used, but it is not - relevant, and is ignored, when matching with pcre2_dfa_match(). The - depth limit is ignored by JIT but is relevant for DFA matching, which - uses function recursion for recursions within the pattern. In this - case, the depth limit controls the amount of system stack that is used. + is used (but in a different way) when JIT is being used, or when + pcre2_dfa_match() is called, to limit computing resource usage by those + matching functions. The depth limit is ignored by JIT but is relevant + for DFA matching, which uses function recursion for recursions within + the pattern. In this case, the depth limit controls the amount of sys- + tem stack that is used. Newline conventions - PCRE2 supports six different conventions for indicating line breaks in - strings: a single CR (carriage return) character, a single LF (line- + PCRE2 supports six different conventions for indicating line breaks in + strings: a single CR (carriage return) character, a single LF (line- feed) character, the two-character sequence CRLF, any of the three pre- - ceding, any Unicode newline sequence, or the NUL character (binary - zero). The pcre2api page has further discussion about newlines, and + ceding, any Unicode newline sequence, or the NUL character (binary + zero). The pcre2api page has further discussion about newlines, and shows how to set the newline convention when calling pcre2_compile(). - It is also possible to specify a newline convention by starting a pat- + It is also possible to specify a newline convention by starting a pat- tern string with one of the following sequences: (*CR) carriage return @@ -5777,7 +5778,7 @@ SPECIAL START-OF-PATTERN ITEMS (*NUL) the NUL character (binary zero) These override the default and the options given to the compiling func- - tion. For example, on a Unix system where LF is the default newline + tion. For example, on a Unix system where LF is the default newline sequence, the pattern (*CR)a.b @@ -5786,38 +5787,38 @@ SPECIAL START-OF-PATTERN ITEMS no longer a newline. If more than one of these settings is present, the last one is used. - The newline convention affects where the circumflex and dollar asser- + The newline convention affects where the circumflex and dollar asser- tions are true. It also affects the interpretation of the dot metachar- - acter when PCRE2_DOTALL is not set, and the behaviour of \N. However, - it does not affect what the \R escape sequence matches. By default, - this is any Unicode newline sequence, for Perl compatibility. However, - this can be changed; see the next section and the description of \R in - the section entitled "Newline sequences" below. A change of \R setting + acter when PCRE2_DOTALL is not set, and the behaviour of \N. However, + it does not affect what the \R escape sequence matches. By default, + this is any Unicode newline sequence, for Perl compatibility. However, + this can be changed; see the next section and the description of \R in + the section entitled "Newline sequences" below. A change of \R setting can be combined with a change of newline convention. Specifying what \R matches It is possible to restrict \R to match only CR, LF, or CRLF (instead of - the complete set of Unicode line endings) by setting the option - PCRE2_BSR_ANYCRLF at compile time. This effect can also be achieved by - starting a pattern with (*BSR_ANYCRLF). For completeness, (*BSR_UNI- + the complete set of Unicode line endings) by setting the option + PCRE2_BSR_ANYCRLF at compile time. This effect can also be achieved by + starting a pattern with (*BSR_ANYCRLF). For completeness, (*BSR_UNI- CODE) is also recognized, corresponding to PCRE2_BSR_UNICODE. EBCDIC CHARACTER CODES - PCRE2 can be compiled to run in an environment that uses EBCDIC as its - character code instead of ASCII or Unicode (typically a mainframe sys- - tem). In the sections below, character code values are ASCII or Uni- + PCRE2 can be compiled to run in an environment that uses EBCDIC as its + character code instead of ASCII or Unicode (typically a mainframe sys- + tem). In the sections below, character code values are ASCII or Uni- code; in an EBCDIC environment these characters may have different code values, and there are no code points greater than 255. CHARACTERS AND METACHARACTERS - A regular expression is a pattern that is matched against a subject - string from left to right. Most characters stand for themselves in a - pattern, and match the corresponding characters in the subject. As a + A regular expression is a pattern that is matched against a subject + string from left to right. Most characters stand for themselves in a + pattern, and match the corresponding characters in the subject. As a trivial example, the pattern The quick brown fox @@ -5826,14 +5827,14 @@ CHARACTERS AND METACHARACTERS caseless matching is specified (the PCRE2_CASELESS option), letters are matched independently of case. - The power of regular expressions comes from the ability to include - alternatives and repetitions in the pattern. These are encoded in the + The power of regular expressions comes from the ability to include + alternatives and repetitions in the pattern. These are encoded in the pattern by the use of metacharacters, which do not stand for themselves but instead are interpreted in some special way. - There are two different sets of metacharacters: those that are recog- - nized anywhere in the pattern except within square brackets, and those - that are recognized within square brackets. Outside square brackets, + There are two different sets of metacharacters: those that are recog- + nized anywhere in the pattern except within square brackets, and those + that are recognized within square brackets. Outside square brackets, the metacharacters are as follows: \ general escape character with several uses @@ -5852,7 +5853,7 @@ CHARACTERS AND METACHARACTERS also "possessive quantifier" { start min/max quantifier - Part of a pattern that is in square brackets is called a "character + Part of a pattern that is in square brackets is called a "character class". In a character class the only metacharacters are: \ general escape character @@ -5869,30 +5870,30 @@ BACKSLASH The backslash character has several uses. Firstly, if it is followed by a character that is not a number or a letter, it takes away any special - meaning that character may have. This use of backslash as an escape + meaning that character may have. This use of backslash as an escape character applies both inside and outside character classes. - For example, if you want to match a * character, you must write \* in - the pattern. This escaping action applies whether or not the following - character would otherwise be interpreted as a metacharacter, so it is - always safe to precede a non-alphanumeric with backslash to specify + For example, if you want to match a * character, you must write \* in + the pattern. This escaping action applies whether or not the following + character would otherwise be interpreted as a metacharacter, so it is + always safe to precede a non-alphanumeric with backslash to specify that it stands for itself. In particular, if you want to match a back- slash, you write \\. - In a UTF mode, only ASCII numbers and letters have any special meaning - after a backslash. All other characters (in particular, those whose + In a UTF mode, only ASCII numbers and letters have any special meaning + after a backslash. All other characters (in particular, those whose codepoints are greater than 127) are treated as literals. - If a pattern is compiled with the PCRE2_EXTENDED option, most white - space in the pattern (other than in a character class), and characters - between a # outside a character class and the next newline, inclusive, + If a pattern is compiled with the PCRE2_EXTENDED option, most white + space in the pattern (other than in a character class), and characters + between a # outside a character class and the next newline, inclusive, are ignored. An escaping backslash can be used to include a white space or # character as part of the pattern. - If you want to remove the special meaning from a sequence of charac- - ters, you can do so by putting them between \Q and \E. This is differ- - ent from Perl in that $ and @ are handled as literals in \Q...\E - sequences in PCRE2, whereas in Perl, $ and @ cause variable interpola- + If you want to remove the special meaning from a sequence of charac- + ters, you can do so by putting them between \Q and \E. This is differ- + ent from Perl in that $ and @ are handled as literals in \Q...\E + sequences in PCRE2, whereas in Perl, $ and @ cause variable interpola- tion. Note the following examples: Pattern PCRE2 matches Perl matches @@ -5902,21 +5903,21 @@ BACKSLASH \Qabc\$xyz\E abc\$xyz abc\$xyz \Qabc\E\$\Qxyz\E abc$xyz abc$xyz - The \Q...\E sequence is recognized both inside and outside character - classes. An isolated \E that is not preceded by \Q is ignored. If \Q - is not followed by \E later in the pattern, the literal interpretation - continues to the end of the pattern (that is, \E is assumed at the - end). If the isolated \Q is inside a character class, this causes an - error, because the character class is not terminated by a closing + The \Q...\E sequence is recognized both inside and outside character + classes. An isolated \E that is not preceded by \Q is ignored. If \Q + is not followed by \E later in the pattern, the literal interpretation + continues to the end of the pattern (that is, \E is assumed at the + end). If the isolated \Q is inside a character class, this causes an + error, because the character class is not terminated by a closing square bracket. Non-printing characters A second use of backslash provides a way of encoding non-printing char- - acters in patterns in a visible manner. There is no restriction on the - appearance of non-printing characters in a pattern, but when a pattern + acters in patterns in a visible manner. There is no restriction on the + appearance of non-printing characters in a pattern, but when a pattern is being prepared by text editing, it is often easier to use one of the - following escape sequences than the binary character it represents. In + following escape sequences than the binary character it represents. In an ASCII or Unicode environment, these escapes are as follows: \a alarm, that is, the BEL character (hex 07) @@ -5933,51 +5934,51 @@ BACKSLASH \x{hhh..} character with hex code hhh.. (default mode) \uhhhh character with hex code hhhh (when PCRE2_ALT_BSUX is set) - The precise effect of \cx on ASCII characters is as follows: if x is a - lower case letter, it is converted to upper case. Then bit 6 of the + The precise effect of \cx on ASCII characters is as follows: if x is a + lower case letter, it is converted to upper case. Then bit 6 of the character (hex 40) is inverted. Thus \cA to \cZ become hex 01 to hex 1A - (A is 41, Z is 5A), but \c{ becomes hex 3B ({ is 7B), and \c; becomes - hex 7B (; is 3B). If the code unit following \c has a value less than + (A is 41, Z is 5A), but \c{ becomes hex 3B ({ is 7B), and \c; becomes + hex 7B (; is 3B). If the code unit following \c has a value less than 32 or greater than 126, a compile-time error occurs. - When PCRE2 is compiled in EBCDIC mode, \a, \e, \f, \n, \r, and \t gen- + When PCRE2 is compiled in EBCDIC mode, \a, \e, \f, \n, \r, and \t gen- erate the appropriate EBCDIC code values. The \c escape is processed as specified for Perl in the perlebcdic document. The only characters that - are allowed after \c are A-Z, a-z, or one of @, [, \, ], ^, _, or ?. - Any other character provokes a compile-time error. The sequence \c@ - encodes character code 0; after \c the letters (in either case) encode + are allowed after \c are A-Z, a-z, or one of @, [, \, ], ^, _, or ?. + Any other character provokes a compile-time error. The sequence \c@ + encodes character code 0; after \c the letters (in either case) encode characters 1-26 (hex 01 to hex 1A); [, \, ], ^, and _ encode characters - 27-31 (hex 1B to hex 1F), and \c? becomes either 255 (hex FF) or 95 + 27-31 (hex 1B to hex 1F), and \c? becomes either 255 (hex FF) or 95 (hex 5F). - Thus, apart from \c?, these escapes generate the same character code - values as they do in an ASCII environment, though the meanings of the - values mostly differ. For example, \cG always generates code value 7, + Thus, apart from \c?, these escapes generate the same character code + values as they do in an ASCII environment, though the meanings of the + values mostly differ. For example, \cG always generates code value 7, which is BEL in ASCII but DEL in EBCDIC. - The sequence \c? generates DEL (127, hex 7F) in an ASCII environment, - but because 127 is not a control character in EBCDIC, Perl makes it - generate the APC character. Unfortunately, there are several variants - of EBCDIC. In most of them the APC character has the value 255 (hex - FF), but in the one Perl calls POSIX-BC its value is 95 (hex 5F). If + The sequence \c? generates DEL (127, hex 7F) in an ASCII environment, + but because 127 is not a control character in EBCDIC, Perl makes it + generate the APC character. Unfortunately, there are several variants + of EBCDIC. In most of them the APC character has the value 255 (hex + FF), but in the one Perl calls POSIX-BC its value is 95 (hex 5F). If certain other characters have POSIX-BC values, PCRE2 makes \c? generate 95; otherwise it generates 255. - After \0 up to two further octal digits are read. If there are fewer - than two digits, just those that are present are used. Thus the + After \0 up to two further octal digits are read. If there are fewer + than two digits, just those that are present are used. Thus the sequence \0\x\015 specifies two binary zeros followed by a CR character (code value 13). Make sure you supply two digits after the initial zero if the pattern character that follows is itself an octal digit. - The escape \o must be followed by a sequence of octal digits, enclosed - in braces. An error occurs if this is not the case. This escape is a - recent addition to Perl; it provides way of specifying character code - points as octal numbers greater than 0777, and it also allows octal + The escape \o must be followed by a sequence of octal digits, enclosed + in braces. An error occurs if this is not the case. This escape is a + recent addition to Perl; it provides way of specifying character code + points as octal numbers greater than 0777, and it also allows octal numbers and back references to be unambiguously specified. For greater clarity and unambiguity, it is best to avoid following \ by a digit greater than zero. Instead, use \o{} or \x{} to specify charac- - ter numbers, and \g{} to specify back references. The following para- + ter numbers, and \g{} to specify back references. The following para- graphs describe the old, ambiguous syntax. The handling of a backslash followed by a digit other than 0 is compli- @@ -5985,16 +5986,16 @@ BACKSLASH Outside a character class, PCRE2 reads the digit and any following dig- its as a decimal number. If the number is less than 10, begins with the - digit 8 or 9, or if there are at least that many previous capturing - left parentheses in the expression, the entire sequence is taken as a + digit 8 or 9, or if there are at least that many previous capturing + left parentheses in the expression, the entire sequence is taken as a back reference. A description of how this works is given later, follow- - ing the discussion of parenthesized subpatterns. Otherwise, up to + ing the discussion of parenthesized subpatterns. Otherwise, up to three octal digits are read to form a character code. - Inside a character class, PCRE2 handles \8 and \9 as the literal char- - acters "8" and "9", and otherwise reads up to three octal digits fol- + Inside a character class, PCRE2 handles \8 and \9 as the literal char- + acters "8" and "9", and otherwise reads up to three octal digits fol- lowing the backslash, using them to generate a data character. Any sub- - sequent digits stand for themselves. For example, outside a character + sequent digits stand for themselves. For example, outside a character class: \040 is another way of writing an ASCII space @@ -6011,31 +6012,31 @@ BACKSLASH the value 255 (decimal) \81 is always a back reference - Note that octal values of 100 or greater that are specified using this - syntax must not be introduced by a leading zero, because no more than + Note that octal values of 100 or greater that are specified using this + syntax must not be introduced by a leading zero, because no more than three octal digits are ever read. - By default, after \x that is not followed by {, from zero to two hexa- - decimal digits are read (letters can be in upper or lower case). Any + By default, after \x that is not followed by {, from zero to two hexa- + decimal digits are read (letters can be in upper or lower case). Any number of hexadecimal digits may appear between \x{ and }. If a charac- - ter other than a hexadecimal digit appears between \x{ and }, or if + ter other than a hexadecimal digit appears between \x{ and }, or if there is no terminating }, an error occurs. - If the PCRE2_ALT_BSUX option is set, the interpretation of \x is as + If the PCRE2_ALT_BSUX option is set, the interpretation of \x is as just described only when it is followed by two hexadecimal digits. Oth- - erwise, it matches a literal "x" character. In this mode, support for - code points greater than 256 is provided by \u, which must be followed - by four hexadecimal digits; otherwise it matches a literal "u" charac- + erwise, it matches a literal "x" character. In this mode, support for + code points greater than 256 is provided by \u, which must be followed + by four hexadecimal digits; otherwise it matches a literal "u" charac- ter. Characters whose value is less than 256 can be defined by either of the two syntaxes for \x (or by \u in PCRE2_ALT_BSUX mode). There is no dif- - ference in the way they are handled. For example, \xdc is exactly the + ference in the way they are handled. For example, \xdc is exactly the same as \x{dc} (or \u00dc in PCRE2_ALT_BSUX mode). Constraints on character values - Characters that are specified using octal or hexadecimal numbers are + Characters that are specified using octal or hexadecimal numbers are limited to certain values, as follows: 8-bit non-UTF mode no greater than 0xff @@ -6043,42 +6044,42 @@ BACKSLASH 32-bit non-UTF mode no greater than 0xffffffff All UTF modes no greater than 0x10ffff and a valid codepoint - Invalid Unicode codepoints are the range 0xd800 to 0xdfff (the so- + Invalid Unicode codepoints are the range 0xd800 to 0xdfff (the so- called "surrogate" codepoints), and 0xffef. Escape sequences in character classes All the sequences that define a single character value can be used both - inside and outside character classes. In addition, inside a character + inside and outside character classes. In addition, inside a character class, \b is interpreted as the backspace character (hex 08). - \N is not allowed in a character class. \B, \R, and \X are not special - inside a character class. Like other unrecognized alphabetic escape - sequences, they cause an error. Outside a character class, these + \N is not allowed in a character class. \B, \R, and \X are not special + inside a character class. Like other unrecognized alphabetic escape + sequences, they cause an error. Outside a character class, these sequences have different meanings. Unsupported escape sequences - In Perl, the sequences \l, \L, \u, and \U are recognized by its string - handler and used to modify the case of following characters. By + In Perl, the sequences \l, \L, \u, and \U are recognized by its string + handler and used to modify the case of following characters. By default, PCRE2 does not support these escape sequences. However, if the PCRE2_ALT_BSUX option is set, \U matches a "U" character, and \u can be used to define a character by code point, as described above. Absolute and relative back references - The sequence \g followed by a signed or unsigned number, optionally - enclosed in braces, is an absolute or relative back reference. A named - back reference can be coded as \g{name}. Back references are discussed + The sequence \g followed by a signed or unsigned number, optionally + enclosed in braces, is an absolute or relative back reference. A named + back reference can be coded as \g{name}. Back references are discussed later, following the discussion of parenthesized subpatterns. Absolute and relative subroutine calls - For compatibility with Oniguruma, the non-Perl syntax \g followed by a + For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or a number enclosed either in angle brackets or single quotes, is - an alternative syntax for referencing a subpattern as a "subroutine". - Details are discussed later. Note that \g{...} (Perl syntax) and - \g<...> (Oniguruma syntax) are not synonymous. The former is a back + an alternative syntax for referencing a subpattern as a "subroutine". + Details are discussed later. Note that \g{...} (Perl syntax) and + \g<...> (Oniguruma syntax) are not synonymous. The former is a back reference; the latter is a subroutine call. Generic character types @@ -6097,55 +6098,55 @@ BACKSLASH \W any "non-word" character There is also the single sequence \N, which matches a non-newline char- - acter. This is the same as the "." metacharacter when PCRE2_DOTALL is - not set. Perl also uses \N to match characters by name; PCRE2 does not + acter. This is the same as the "." metacharacter when PCRE2_DOTALL is + not set. Perl also uses \N to match characters by name; PCRE2 does not support this. - Each pair of lower and upper case escape sequences partitions the com- - plete set of characters into two disjoint sets. Any given character - matches one, and only one, of each pair. The sequences can appear both - inside and outside character classes. They each match one character of - the appropriate type. If the current matching point is at the end of - the subject string, all of them fail, because there is no character to + Each pair of lower and upper case escape sequences partitions the com- + plete set of characters into two disjoint sets. Any given character + matches one, and only one, of each pair. The sequences can appear both + inside and outside character classes. They each match one character of + the appropriate type. If the current matching point is at the end of + the subject string, all of them fail, because there is no character to match. - The default \s characters are HT (9), LF (10), VT (11), FF (12), CR - (13), and space (32), which are defined as white space in the "C" + The default \s characters are HT (9), LF (10), VT (11), FF (12), CR + (13), and space (32), which are defined as white space in the "C" locale. This list may vary if locale-specific matching is taking place. - For example, in some locales the "non-breaking space" character (\xA0) + For example, in some locales the "non-breaking space" character (\xA0) is recognized as white space, and in others the VT character is not. - A "word" character is an underscore or any character that is a letter - or digit. By default, the definition of letters and digits is con- + A "word" character is an underscore or any character that is a letter + or digit. By default, the definition of letters and digits is con- trolled by PCRE2's low-valued character tables, and may vary if locale- specific matching is taking place (see "Locale support" in the pcre2api - page). For example, in a French locale such as "fr_FR" in Unix-like - systems, or "french" in Windows, some character codes greater than 127 - are used for accented letters, and these are then matched by \w. The + page). For example, in a French locale such as "fr_FR" in Unix-like + systems, or "french" in Windows, some character codes greater than 127 + are used for accented letters, and these are then matched by \w. The use of locales with Unicode is discouraged. - By default, characters whose code points are greater than 127 never + By default, characters whose code points are greater than 127 never match \d, \s, or \w, and always match \D, \S, and \W, although this may - be different for characters in the range 128-255 when locale-specific - matching is happening. These escape sequences retain their original - meanings from before Unicode support was available, mainly for effi- - ciency reasons. If the PCRE2_UCP option is set, the behaviour is - changed so that Unicode properties are used to determine character + be different for characters in the range 128-255 when locale-specific + matching is happening. These escape sequences retain their original + meanings from before Unicode support was available, mainly for effi- + ciency reasons. If the PCRE2_UCP option is set, the behaviour is + changed so that Unicode properties are used to determine character types, as follows: \d any character that matches \p{Nd} (decimal digit) \s any character that matches \p{Z} or \h or \v \w any character that matches \p{L} or \p{N}, plus underscore - The upper case escapes match the inverse sets of characters. Note that - \d matches only decimal digits, whereas \w matches any Unicode digit, + The upper case escapes match the inverse sets of characters. Note that + \d matches only decimal digits, whereas \w matches any Unicode digit, as well as any Unicode letter, and underscore. Note also that PCRE2_UCP - affects \b, and \B because they are defined in terms of \w and \W. + affects \b, and \B because they are defined in terms of \w and \W. Matching these sequences is noticeably slower when PCRE2_UCP is set. - The sequences \h, \H, \v, and \V, in contrast to the other sequences, - which match only ASCII characters by default, always match a specific - list of code points, whether or not PCRE2_UCP is set. The horizontal + The sequences \h, \H, \v, and \V, in contrast to the other sequences, + which match only ASCII characters by default, always match a specific + list of code points, whether or not PCRE2_UCP is set. The horizontal space characters are: U+0009 Horizontal tab (HT) @@ -6178,36 +6179,36 @@ BACKSLASH U+2028 Line separator U+2029 Paragraph separator - In 8-bit, non-UTF-8 mode, only the characters with code points less + In 8-bit, non-UTF-8 mode, only the characters with code points less than 256 are relevant. Newline sequences - Outside a character class, by default, the escape sequence \R matches - any Unicode newline sequence. In 8-bit non-UTF-8 mode \R is equivalent + Outside a character class, by default, the escape sequence \R matches + any Unicode newline sequence. In 8-bit non-UTF-8 mode \R is equivalent to the following: (?>\r\n|\n|\x0b|\f|\r|\x85) - This is an example of an "atomic group", details of which are given + This is an example of an "atomic group", details of which are given below. This particular group matches either the two-character sequence - CR followed by LF, or one of the single characters LF (linefeed, - U+000A), VT (vertical tab, U+000B), FF (form feed, U+000C), CR (car- - riage return, U+000D), or NEL (next line, U+0085). Because this is an - atomic group, the two-character sequence is treated as a single unit + CR followed by LF, or one of the single characters LF (linefeed, + U+000A), VT (vertical tab, U+000B), FF (form feed, U+000C), CR (car- + riage return, U+000D), or NEL (next line, U+0085). Because this is an + atomic group, the two-character sequence is treated as a single unit that cannot be split. - In other modes, two additional characters whose codepoints are greater + In other modes, two additional characters whose codepoints are greater than 255 are added: LS (line separator, U+2028) and PS (paragraph sepa- - rator, U+2029). Unicode support is not needed for these characters to + rator, U+2029). Unicode support is not needed for these characters to be recognized. It is possible to restrict \R to match only CR, LF, or CRLF (instead of - the complete set of Unicode line endings) by setting the option - PCRE2_BSR_ANYCRLF at compile time. (BSR is an abbrevation for "back- + the complete set of Unicode line endings) by setting the option + PCRE2_BSR_ANYCRLF at compile time. (BSR is an abbrevation for "back- slash R".) This can be made the default when PCRE2 is built; if this is - the case, the other behaviour can be requested via the PCRE2_BSR_UNI- - CODE option. It is also possible to specify these settings by starting + the case, the other behaviour can be requested via the PCRE2_BSR_UNI- + CODE option. It is also possible to specify these settings by starting a pattern string with one of the following sequences: (*BSR_ANYCRLF) CR, LF, or CRLF only @@ -6215,79 +6216,79 @@ BACKSLASH These override the default and the options given to the compiling func- tion. Note that these special settings, which are not Perl-compatible, - are recognized only at the very start of a pattern, and that they must - be in upper case. If more than one of them is present, the last one is - used. They can be combined with a change of newline convention; for + are recognized only at the very start of a pattern, and that they must + be in upper case. If more than one of them is present, the last one is + used. They can be combined with a change of newline convention; for example, a pattern can start with: (*ANY)(*BSR_ANYCRLF) - They can also be combined with the (*UTF) or (*UCP) special sequences. - Inside a character class, \R is treated as an unrecognized escape + They can also be combined with the (*UTF) or (*UCP) special sequences. + Inside a character class, \R is treated as an unrecognized escape sequence, and causes an error. Unicode character properties - When PCRE2 is built with Unicode support (the default), three addi- - tional escape sequences that match characters with specific properties - are available. In 8-bit non-UTF-8 mode, these sequences are of course - limited to testing characters whose codepoints are less than 256, but - they do work in this mode. In 32-bit non-UTF mode, codepoints greater - than 0x10ffff (the Unicode limit) may be encountered. These are all - treated as being in the Common script and with an unassigned type. The + When PCRE2 is built with Unicode support (the default), three addi- + tional escape sequences that match characters with specific properties + are available. In 8-bit non-UTF-8 mode, these sequences are of course + limited to testing characters whose codepoints are less than 256, but + they do work in this mode. In 32-bit non-UTF mode, codepoints greater + than 0x10ffff (the Unicode limit) may be encountered. These are all + treated as being in the Common script and with an unassigned type. The extra escape sequences are: \p{xx} a character with the xx property \P{xx} a character without the xx property \X a Unicode extended grapheme cluster - The property names represented by xx above are limited to the Unicode + The property names represented by xx above are limited to the Unicode script names, the general category properties, "Any", which matches any character (including newline), and some special PCRE2 properties - (described in the next section). Other Perl properties such as "InMu- - sicalSymbols" are not supported by PCRE2. Note that \P{Any} does not + (described in the next section). Other Perl properties such as "InMu- + sicalSymbols" are not supported by PCRE2. Note that \P{Any} does not match any characters, so always causes a match failure. Sets of Unicode characters are defined as belonging to certain scripts. - A character from one of these sets can be matched using a script name. + A character from one of these sets can be matched using a script name. For example: \p{Greek} \P{Han} - Those that are not part of an identified script are lumped together as + Those that are not part of an identified script are lumped together as "Common". The current list of scripts is: - Ahom, Anatolian_Hieroglyphs, Arabic, Armenian, Avestan, Balinese, - Bamum, Bassa_Vah, Batak, Bengali, Bopomofo, Brahmi, Braille, Buginese, - Buhid, Canadian_Aboriginal, Carian, Caucasian_Albanian, Chakma, Cham, - Cherokee, Common, Coptic, Cuneiform, Cypriot, Cyrillic, Deseret, - Devanagari, Duployan, Egyptian_Hieroglyphs, Elbasan, Ethiopic, Geor- - gian, Glagolitic, Gothic, Grantha, Greek, Gujarati, Gurmukhi, Han, + Ahom, Anatolian_Hieroglyphs, Arabic, Armenian, Avestan, Balinese, + Bamum, Bassa_Vah, Batak, Bengali, Bopomofo, Brahmi, Braille, Buginese, + Buhid, Canadian_Aboriginal, Carian, Caucasian_Albanian, Chakma, Cham, + Cherokee, Common, Coptic, Cuneiform, Cypriot, Cyrillic, Deseret, + Devanagari, Duployan, Egyptian_Hieroglyphs, Elbasan, Ethiopic, Geor- + gian, Glagolitic, Gothic, Grantha, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hatran, Hebrew, Hiragana, Imperial_Aramaic, Inherited, - Inscriptional_Pahlavi, Inscriptional_Parthian, Javanese, Kaithi, Kan- - nada, Katakana, Kayah_Li, Kharoshthi, Khmer, Khojki, Khudawadi, Lao, - Latin, Lepcha, Limbu, Linear_A, Linear_B, Lisu, Lycian, Lydian, Maha- + Inscriptional_Pahlavi, Inscriptional_Parthian, Javanese, Kaithi, Kan- + nada, Katakana, Kayah_Li, Kharoshthi, Khmer, Khojki, Khudawadi, Lao, + Latin, Lepcha, Limbu, Linear_A, Linear_B, Lisu, Lycian, Lydian, Maha- jani, Malayalam, Mandaic, Manichaean, Meetei_Mayek, Mende_Kikakui, - Meroitic_Cursive, Meroitic_Hieroglyphs, Miao, Modi, Mongolian, Mro, - Multani, Myanmar, Nabataean, New_Tai_Lue, Nko, Ogham, Ol_Chiki, - Old_Hungarian, Old_Italic, Old_North_Arabian, Old_Permic, Old_Persian, + Meroitic_Cursive, Meroitic_Hieroglyphs, Miao, Modi, Mongolian, Mro, + Multani, Myanmar, Nabataean, New_Tai_Lue, Nko, Ogham, Ol_Chiki, + Old_Hungarian, Old_Italic, Old_North_Arabian, Old_Permic, Old_Persian, Old_South_Arabian, Old_Turkic, Oriya, Osmanya, Pahawh_Hmong, Palmyrene, Pau_Cin_Hau, Phags_Pa, Phoenician, Psalter_Pahlavi, Rejang, Runic, Samaritan, Saurashtra, Sharada, Shavian, Siddham, SignWriting, Sinhala, - Sora_Sompeng, Sundanese, Syloti_Nagri, Syriac, Tagalog, Tagbanwa, - Tai_Le, Tai_Tham, Tai_Viet, Takri, Tamil, Telugu, Thaana, Thai, + Sora_Sompeng, Sundanese, Syloti_Nagri, Syriac, Tagalog, Tagbanwa, + Tai_Le, Tai_Tham, Tai_Viet, Takri, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Tirhuta, Ugaritic, Vai, Warang_Citi, Yi. Each character has exactly one Unicode general category property, spec- - ified by a two-letter abbreviation. For compatibility with Perl, nega- - tion can be specified by including a circumflex between the opening - brace and the property name. For example, \p{^Lu} is the same as + ified by a two-letter abbreviation. For compatibility with Perl, nega- + tion can be specified by including a circumflex between the opening + brace and the property name. For example, \p{^Lu} is the same as \P{Lu}. If only one letter is specified with \p or \P, it includes all the gen- - eral category properties that start with that letter. In this case, in - the absence of negation, the curly brackets in the escape sequence are + eral category properties that start with that letter. In this case, in + the absence of negation, the curly brackets in the escape sequence are optional; these two examples have the same effect: \p{L} @@ -6339,59 +6340,59 @@ BACKSLASH Zp Paragraph separator Zs Space separator - The special property L& is also supported: it matches a character that - has the Lu, Ll, or Lt property, in other words, a letter that is not + The special property L& is also supported: it matches a character that + has the Lu, Ll, or Lt property, in other words, a letter that is not classified as a modifier or "other". - The Cs (Surrogate) property applies only to characters in the range - U+D800 to U+DFFF. Such characters are not valid in Unicode strings and - so cannot be tested by PCRE2, unless UTF validity checking has been - turned off (see the discussion of PCRE2_NO_UTF_CHECK in the pcre2api + The Cs (Surrogate) property applies only to characters in the range + U+D800 to U+DFFF. Such characters are not valid in Unicode strings and + so cannot be tested by PCRE2, unless UTF validity checking has been + turned off (see the discussion of PCRE2_NO_UTF_CHECK in the pcre2api page). Perl does not support the Cs property. - The long synonyms for property names that Perl supports (such as - \p{Letter}) are not supported by PCRE2, nor is it permitted to prefix + The long synonyms for property names that Perl supports (such as + \p{Letter}) are not supported by PCRE2, nor is it permitted to prefix any of these properties with "Is". No character that is in the Unicode table has the Cn (unassigned) prop- erty. Instead, this property is assumed for any code point that is not in the Unicode table. - Specifying caseless matching does not affect these escape sequences. - For example, \p{Lu} always matches only upper case letters. This is + Specifying caseless matching does not affect these escape sequences. + For example, \p{Lu} always matches only upper case letters. This is different from the behaviour of current versions of Perl. - Matching characters by Unicode property is not fast, because PCRE2 has - to do a multistage table lookup in order to find a character's prop- + Matching characters by Unicode property is not fast, because PCRE2 has + to do a multistage table lookup in order to find a character's prop- erty. That is why the traditional escape sequences such as \d and \w do - not use Unicode properties in PCRE2 by default, though you can make - them do so by setting the PCRE2_UCP option or by starting the pattern + not use Unicode properties in PCRE2 by default, though you can make + them do so by setting the PCRE2_UCP option or by starting the pattern with (*UCP). Extended grapheme clusters - The \X escape matches any number of Unicode characters that form an + The \X escape matches any number of Unicode characters that form an "extended grapheme cluster", and treats the sequence as an atomic group - (see below). Unicode supports various kinds of composite character by - giving each character a grapheme breaking property, and having rules + (see below). Unicode supports various kinds of composite character by + giving each character a grapheme breaking property, and having rules that use these properties to define the boundaries of extended grapheme - clusters. \X always matches at least one character. Then it decides - whether to add additional characters according to the following rules + clusters. \X always matches at least one character. Then it decides + whether to add additional characters according to the following rules for ending a cluster: 1. End at the end of the subject string. - 2. Do not end between CR and LF; otherwise end after any control char- + 2. Do not end between CR and LF; otherwise end after any control char- acter. - 3. Do not break Hangul (a Korean script) syllable sequences. Hangul - characters are of five types: L, V, T, LV, and LVT. An L character may - be followed by an L, V, LV, or LVT character; an LV or V character may + 3. Do not break Hangul (a Korean script) syllable sequences. Hangul + characters are of five types: L, V, T, LV, and LVT. An L character may + be followed by an L, V, LV, or LVT character; an LV or V character may be followed by a V or T character; an LVT or T character may be follwed only by a T character. - 4. Do not end before extending characters or spacing marks. Characters - with the "mark" property always have the "extend" grapheme breaking + 4. Do not end before extending characters or spacing marks. Characters + with the "mark" property always have the "extend" grapheme breaking property. 5. Do not end after prepend characters. @@ -6400,10 +6401,10 @@ BACKSLASH PCRE2's additional properties - As well as the standard Unicode properties described above, PCRE2 sup- - ports four more that make it possible to convert traditional escape + As well as the standard Unicode properties described above, PCRE2 sup- + ports four more that make it possible to convert traditional escape sequences such as \w and \s to use Unicode properties. PCRE2 uses these - non-standard, non-Perl properties internally when PCRE2_UCP is set. + non-standard, non-Perl properties internally when PCRE2_UCP is set. However, they may also be used explicitly. These properties are: Xan Any alphanumeric character @@ -6411,53 +6412,53 @@ BACKSLASH Xsp Any Perl space character Xwd Any Perl "word" character - Xan matches characters that have either the L (letter) or the N (num- - ber) property. Xps matches the characters tab, linefeed, vertical tab, - form feed, or carriage return, and any other character that has the Z - (separator) property. Xsp is the same as Xps; in PCRE1 it used to - exclude vertical tab, for Perl compatibility, but Perl changed. Xwd + Xan matches characters that have either the L (letter) or the N (num- + ber) property. Xps matches the characters tab, linefeed, vertical tab, + form feed, or carriage return, and any other character that has the Z + (separator) property. Xsp is the same as Xps; in PCRE1 it used to + exclude vertical tab, for Perl compatibility, but Perl changed. Xwd matches the same characters as Xan, plus underscore. - There is another non-standard property, Xuc, which matches any charac- - ter that can be represented by a Universal Character Name in C++ and - other programming languages. These are the characters $, @, ` (grave - accent), and all characters with Unicode code points greater than or - equal to U+00A0, except for the surrogates U+D800 to U+DFFF. Note that - most base (ASCII) characters are excluded. (Universal Character Names - are of the form \uHHHH or \UHHHHHHHH where H is a hexadecimal digit. + There is another non-standard property, Xuc, which matches any charac- + ter that can be represented by a Universal Character Name in C++ and + other programming languages. These are the characters $, @, ` (grave + accent), and all characters with Unicode code points greater than or + equal to U+00A0, except for the surrogates U+D800 to U+DFFF. Note that + most base (ASCII) characters are excluded. (Universal Character Names + are of the form \uHHHH or \UHHHHHHHH where H is a hexadecimal digit. Note that the Xuc property does not match these sequences but the char- acters that they represent.) Resetting the match start - The escape sequence \K causes any previously matched characters not to + The escape sequence \K causes any previously matched characters not to be included in the final matched sequence. For example, the pattern: foo\Kbar - matches "foobar", but reports that it has matched "bar". This feature - is similar to a lookbehind assertion (described below). However, in - this case, the part of the subject before the real match does not have - to be of fixed length, as lookbehind assertions do. The use of \K does - not interfere with the setting of captured substrings. For example, + matches "foobar", but reports that it has matched "bar". This feature + is similar to a lookbehind assertion (described below). However, in + this case, the part of the subject before the real match does not have + to be of fixed length, as lookbehind assertions do. The use of \K does + not interfere with the setting of captured substrings. For example, when the pattern (foo)\Kbar matches "foobar", the first substring is still set to "foo". - Perl documents that the use of \K within assertions is "not well - defined". In PCRE2, \K is acted upon when it occurs inside positive - assertions, but is ignored in negative assertions. Note that when a - pattern such as (?=ab\K) matches, the reported start of the match can + Perl documents that the use of \K within assertions is "not well + defined". In PCRE2, \K is acted upon when it occurs inside positive + assertions, but is ignored in negative assertions. Note that when a + pattern such as (?=ab\K) matches, the reported start of the match can be greater than the end of the match. Simple assertions - The final use of backslash is for certain simple assertions. An asser- - tion specifies a condition that has to be met at a particular point in - a match, without consuming any characters from the subject string. The - use of subpatterns for more complicated assertions is described below. + The final use of backslash is for certain simple assertions. An asser- + tion specifies a condition that has to be met at a particular point in + a match, without consuming any characters from the subject string. The + use of subpatterns for more complicated assertions is described below. The backslashed assertions are: \b matches at a word boundary @@ -6468,184 +6469,184 @@ BACKSLASH \z matches only at the end of the subject \G matches at the first matching position in the subject - Inside a character class, \b has a different meaning; it matches the - backspace character. If any other of these assertions appears in a + Inside a character class, \b has a different meaning; it matches the + backspace character. If any other of these assertions appears in a character class, an "invalid escape sequence" error is generated. - A word boundary is a position in the subject string where the current - character and the previous character do not both match \w or \W (i.e. - one matches \w and the other matches \W), or the start or end of the - string if the first or last character matches \w, respectively. In a - UTF mode, the meanings of \w and \W can be changed by setting the + A word boundary is a position in the subject string where the current + character and the previous character do not both match \w or \W (i.e. + one matches \w and the other matches \W), or the start or end of the + string if the first or last character matches \w, respectively. In a + UTF mode, the meanings of \w and \W can be changed by setting the PCRE2_UCP option. When this is done, it also affects \b and \B. Neither - PCRE2 nor Perl has a separate "start of word" or "end of word" metase- - quence. However, whatever follows \b normally determines which it is. + PCRE2 nor Perl has a separate "start of word" or "end of word" metase- + quence. However, whatever follows \b normally determines which it is. For example, the fragment \ba matches "a" at the start of a word. - The \A, \Z, and \z assertions differ from the traditional circumflex + The \A, \Z, and \z assertions differ from the traditional circumflex and dollar (described in the next section) in that they only ever match - at the very start and end of the subject string, whatever options are - set. Thus, they are independent of multiline mode. These three asser- - tions are not affected by the PCRE2_NOTBOL or PCRE2_NOTEOL options, - which affect only the behaviour of the circumflex and dollar metachar- - acters. However, if the startoffset argument of pcre2_match() is non- - zero, indicating that matching is to start at a point other than the - beginning of the subject, \A can never match. The difference between - \Z and \z is that \Z matches before a newline at the end of the string + at the very start and end of the subject string, whatever options are + set. Thus, they are independent of multiline mode. These three asser- + tions are not affected by the PCRE2_NOTBOL or PCRE2_NOTEOL options, + which affect only the behaviour of the circumflex and dollar metachar- + acters. However, if the startoffset argument of pcre2_match() is non- + zero, indicating that matching is to start at a point other than the + beginning of the subject, \A can never match. The difference between + \Z and \z is that \Z matches before a newline at the end of the string as well as at the very end, whereas \z matches only at the end. - The \G assertion is true only when the current matching position is at - the start point of the match, as specified by the startoffset argument - of pcre2_match(). It differs from \A when the value of startoffset is - non-zero. By calling pcre2_match() multiple times with appropriate - arguments, you can mimic Perl's /g option, and it is in this kind of + The \G assertion is true only when the current matching position is at + the start point of the match, as specified by the startoffset argument + of pcre2_match(). It differs from \A when the value of startoffset is + non-zero. By calling pcre2_match() multiple times with appropriate + arguments, you can mimic Perl's /g option, and it is in this kind of implementation where \G can be useful. - Note, however, that PCRE2's interpretation of \G, as the start of the + Note, however, that PCRE2's interpretation of \G, as the start of the current match, is subtly different from Perl's, which defines it as the - end of the previous match. In Perl, these can be different when the - previously matched string was empty. Because PCRE2 does just one match + end of the previous match. In Perl, these can be different when the + previously matched string was empty. Because PCRE2 does just one match at a time, it cannot reproduce this behaviour. - If all the alternatives of a pattern begin with \G, the expression is + If all the alternatives of a pattern begin with \G, the expression is anchored to the starting match position, and the "anchored" flag is set in the compiled regular expression. CIRCUMFLEX AND DOLLAR - The circumflex and dollar metacharacters are zero-width assertions. - That is, they test for a particular condition being true without con- + The circumflex and dollar metacharacters are zero-width assertions. + That is, they test for a particular condition being true without con- suming any characters from the subject string. These two metacharacters - are concerned with matching the starts and ends of lines. If the new- - line convention is set so that only the two-character sequence CRLF is - recognized as a newline, isolated CR and LF characters are treated as + are concerned with matching the starts and ends of lines. If the new- + line convention is set so that only the two-character sequence CRLF is + recognized as a newline, isolated CR and LF characters are treated as ordinary data characters, and are not recognized as newlines. Outside a character class, in the default matching mode, the circumflex - character is an assertion that is true only if the current matching - point is at the start of the subject string. If the startoffset argu- - ment of pcre2_match() is non-zero, or if PCRE2_NOTBOL is set, circum- - flex can never match if the PCRE2_MULTILINE option is unset. Inside a - character class, circumflex has an entirely different meaning (see + character is an assertion that is true only if the current matching + point is at the start of the subject string. If the startoffset argu- + ment of pcre2_match() is non-zero, or if PCRE2_NOTBOL is set, circum- + flex can never match if the PCRE2_MULTILINE option is unset. Inside a + character class, circumflex has an entirely different meaning (see below). - Circumflex need not be the first character of the pattern if a number - of alternatives are involved, but it should be the first thing in each - alternative in which it appears if the pattern is ever to match that - branch. If all possible alternatives start with a circumflex, that is, - if the pattern is constrained to match only at the start of the sub- - ject, it is said to be an "anchored" pattern. (There are also other + Circumflex need not be the first character of the pattern if a number + of alternatives are involved, but it should be the first thing in each + alternative in which it appears if the pattern is ever to match that + branch. If all possible alternatives start with a circumflex, that is, + if the pattern is constrained to match only at the start of the sub- + ject, it is said to be an "anchored" pattern. (There are also other constructs that can cause a pattern to be anchored.) - The dollar character is an assertion that is true only if the current - matching point is at the end of the subject string, or immediately - before a newline at the end of the string (by default), unless + The dollar character is an assertion that is true only if the current + matching point is at the end of the subject string, or immediately + before a newline at the end of the string (by default), unless PCRE2_NOTEOL is set. Note, however, that it does not actually match the newline. Dollar need not be the last character of the pattern if a num- ber of alternatives are involved, but it should be the last item in any - branch in which it appears. Dollar has no special meaning in a charac- + branch in which it appears. Dollar has no special meaning in a charac- ter class. - The meaning of dollar can be changed so that it matches only at the - very end of the string, by setting the PCRE2_DOLLAR_ENDONLY option at + The meaning of dollar can be changed so that it matches only at the + very end of the string, by setting the PCRE2_DOLLAR_ENDONLY option at compile time. This does not affect the \Z assertion. The meanings of the circumflex and dollar metacharacters are changed if - the PCRE2_MULTILINE option is set. When this is the case, a dollar - character matches before any newlines in the string, as well as at the - very end, and a circumflex matches immediately after internal newlines - as well as at the start of the subject string. It does not match after - a newline that ends the string, for compatibility with Perl. However, + the PCRE2_MULTILINE option is set. When this is the case, a dollar + character matches before any newlines in the string, as well as at the + very end, and a circumflex matches immediately after internal newlines + as well as at the start of the subject string. It does not match after + a newline that ends the string, for compatibility with Perl. However, this can be changed by setting the PCRE2_ALT_CIRCUMFLEX option. - For example, the pattern /^abc$/ matches the subject string "def\nabc" - (where \n represents a newline) in multiline mode, but not otherwise. - Consequently, patterns that are anchored in single line mode because - all branches start with ^ are not anchored in multiline mode, and a - match for circumflex is possible when the startoffset argument of - pcre2_match() is non-zero. The PCRE2_DOLLAR_ENDONLY option is ignored + For example, the pattern /^abc$/ matches the subject string "def\nabc" + (where \n represents a newline) in multiline mode, but not otherwise. + Consequently, patterns that are anchored in single line mode because + all branches start with ^ are not anchored in multiline mode, and a + match for circumflex is possible when the startoffset argument of + pcre2_match() is non-zero. The PCRE2_DOLLAR_ENDONLY option is ignored if PCRE2_MULTILINE is set. - When the newline convention (see "Newline conventions" below) recog- - nizes the two-character sequence CRLF as a newline, this is preferred, - even if the single characters CR and LF are also recognized as new- - lines. For example, if the newline convention is "any", a multiline - mode circumflex matches before "xyz" in the string "abc\r\nxyz" rather - than after CR, even though CR on its own is a valid newline. (It also + When the newline convention (see "Newline conventions" below) recog- + nizes the two-character sequence CRLF as a newline, this is preferred, + even if the single characters CR and LF are also recognized as new- + lines. For example, if the newline convention is "any", a multiline + mode circumflex matches before "xyz" in the string "abc\r\nxyz" rather + than after CR, even though CR on its own is a valid newline. (It also matches at the very start of the string, of course.) - Note that the sequences \A, \Z, and \z can be used to match the start - and end of the subject in both modes, and if all branches of a pattern - start with \A it is always anchored, whether or not PCRE2_MULTILINE is + Note that the sequences \A, \Z, and \z can be used to match the start + and end of the subject in both modes, and if all branches of a pattern + start with \A it is always anchored, whether or not PCRE2_MULTILINE is set. FULL STOP (PERIOD, DOT) AND \N Outside a character class, a dot in the pattern matches any one charac- - ter in the subject string except (by default) a character that signi- + ter in the subject string except (by default) a character that signi- fies the end of a line. - When a line ending is defined as a single character, dot never matches - that character; when the two-character sequence CRLF is used, dot does - not match CR if it is immediately followed by LF, but otherwise it - matches all characters (including isolated CRs and LFs). When any Uni- - code line endings are being recognized, dot does not match CR or LF or + When a line ending is defined as a single character, dot never matches + that character; when the two-character sequence CRLF is used, dot does + not match CR if it is immediately followed by LF, but otherwise it + matches all characters (including isolated CRs and LFs). When any Uni- + code line endings are being recognized, dot does not match CR or LF or any of the other line ending characters. - The behaviour of dot with regard to newlines can be changed. If the - PCRE2_DOTALL option is set, a dot matches any one character, without - exception. If the two-character sequence CRLF is present in the sub- + The behaviour of dot with regard to newlines can be changed. If the + PCRE2_DOTALL option is set, a dot matches any one character, without + exception. If the two-character sequence CRLF is present in the sub- ject string, it takes two dots to match it. - The handling of dot is entirely independent of the handling of circum- - flex and dollar, the only relationship being that they both involve + The handling of dot is entirely independent of the handling of circum- + flex and dollar, the only relationship being that they both involve newlines. Dot has no special meaning in a character class. - The escape sequence \N behaves like a dot, except that it is not - affected by the PCRE2_DOTALL option. In other words, it matches any - character except one that signifies the end of a line. Perl also uses + The escape sequence \N behaves like a dot, except that it is not + affected by the PCRE2_DOTALL option. In other words, it matches any + character except one that signifies the end of a line. Perl also uses \N to match characters by name; PCRE2 does not support this. MATCHING A SINGLE CODE UNIT - Outside a character class, the escape sequence \C matches any one code - unit, whether or not a UTF mode is set. In the 8-bit library, one code - unit is one byte; in the 16-bit library it is a 16-bit unit; in the - 32-bit library it is a 32-bit unit. Unlike a dot, \C always matches - line-ending characters. The feature is provided in Perl in order to + Outside a character class, the escape sequence \C matches any one code + unit, whether or not a UTF mode is set. In the 8-bit library, one code + unit is one byte; in the 16-bit library it is a 16-bit unit; in the + 32-bit library it is a 32-bit unit. Unlike a dot, \C always matches + line-ending characters. The feature is provided in Perl in order to match individual bytes in UTF-8 mode, but it is unclear how it can use- fully be used. - Because \C breaks up characters into individual code units, matching - one unit with \C in UTF-8 or UTF-16 mode means that the rest of the - string may start with a malformed UTF character. This has undefined + Because \C breaks up characters into individual code units, matching + one unit with \C in UTF-8 or UTF-16 mode means that the rest of the + string may start with a malformed UTF character. This has undefined results, because PCRE2 assumes that it is matching character by charac- - ter in a valid UTF string (by default it checks the subject string's - validity at the start of processing unless the PCRE2_NO_UTF_CHECK + ter in a valid UTF string (by default it checks the subject string's + validity at the start of processing unless the PCRE2_NO_UTF_CHECK option is used). - An application can lock out the use of \C by setting the - PCRE2_NEVER_BACKSLASH_C option when compiling a pattern. It is also + An application can lock out the use of \C by setting the + PCRE2_NEVER_BACKSLASH_C option when compiling a pattern. It is also possible to build PCRE2 with the use of \C permanently disabled. - PCRE2 does not allow \C to appear in lookbehind assertions (described - below) in UTF-8 or UTF-16 modes, because this would make it impossible - to calculate the length of the lookbehind. Neither the alternative + PCRE2 does not allow \C to appear in lookbehind assertions (described + below) in UTF-8 or UTF-16 modes, because this would make it impossible + to calculate the length of the lookbehind. Neither the alternative matching function pcre2_dfa_match() nor the JIT optimizer support \C in these UTF modes. The former gives a match-time error; the latter fails to optimize and so the match is always run using the interpreter. - In the 32-bit library, however, \C is always supported (when not - explicitly locked out) because it always matches a single code unit, + In the 32-bit library, however, \C is always supported (when not + explicitly locked out) because it always matches a single code unit, whether or not UTF-32 is specified. In general, the \C escape sequence is best avoided. However, one way of - using it that avoids the problem of malformed UTF-8 or UTF-16 charac- - ters is to use a lookahead to check the length of the next character, - as in this pattern, which could be used with a UTF-8 string (ignore + using it that avoids the problem of malformed UTF-8 or UTF-16 charac- + ters is to use a lookahead to check the length of the next character, + as in this pattern, which could be used with a UTF-8 string (ignore white space and line breaks): (?| (?=[\x00-\x7f])(\C) | @@ -6653,10 +6654,10 @@ MATCHING A SINGLE CODE UNIT (?=[\x{800}-\x{ffff}])(\C)(\C)(\C) | (?=[\x{10000}-\x{1fffff}])(\C)(\C)(\C)(\C)) - In this example, a group that starts with (?| resets the capturing + In this example, a group that starts with (?| resets the capturing parentheses numbers in each alternative (see "Duplicate Subpattern Num- bers" below). The assertions at the start of each branch check the next - UTF-8 character for values whose encoding uses 1, 2, 3, or 4 bytes, + UTF-8 character for values whose encoding uses 1, 2, 3, or 4 bytes, respectively. The character's individual bytes are then captured by the appropriate number of \C groups. @@ -6665,105 +6666,105 @@ SQUARE BRACKETS AND CHARACTER CLASSES An opening square bracket introduces a character class, terminated by a closing square bracket. A closing square bracket on its own is not spe- - cial by default. If a closing square bracket is required as a member + cial by default. If a closing square bracket is required as a member of the class, it should be the first data character in the class (after - an initial circumflex, if present) or escaped with a backslash. This - means that, by default, an empty class cannot be defined. However, if - the PCRE2_ALLOW_EMPTY_CLASS option is set, a closing square bracket at + an initial circumflex, if present) or escaped with a backslash. This + means that, by default, an empty class cannot be defined. However, if + the PCRE2_ALLOW_EMPTY_CLASS option is set, a closing square bracket at the start does end the (empty) class. - A character class matches a single character in the subject. A matched + A character class matches a single character in the subject. A matched character must be in the set of characters defined by the class, unless - the first character in the class definition is a circumflex, in which + the first character in the class definition is a circumflex, in which case the subject character must not be in the set defined by the class. - If a circumflex is actually required as a member of the class, ensure + If a circumflex is actually required as a member of the class, ensure it is not the first character, or escape it with a backslash. - For example, the character class [aeiou] matches any lower case vowel, - while [^aeiou] matches any character that is not a lower case vowel. + For example, the character class [aeiou] matches any lower case vowel, + while [^aeiou] matches any character that is not a lower case vowel. Note that a circumflex is just a convenient notation for specifying the - characters that are in the class by enumerating those that are not. A - class that starts with a circumflex is not an assertion; it still con- - sumes a character from the subject string, and therefore it fails if + characters that are in the class by enumerating those that are not. A + class that starts with a circumflex is not an assertion; it still con- + sumes a character from the subject string, and therefore it fails if the current pointer is at the end of the string. - When caseless matching is set, any letters in a class represent both - their upper case and lower case versions, so for example, a caseless - [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not + When caseless matching is set, any letters in a class represent both + their upper case and lower case versions, so for example, a caseless + [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a caseful version would. - Characters that might indicate line breaks are never treated in any - special way when matching character classes, whatever line-ending - sequence is in use, and whatever setting of the PCRE2_DOTALL and - PCRE2_MULTILINE options is used. A class such as [^a] always matches + Characters that might indicate line breaks are never treated in any + special way when matching character classes, whatever line-ending + sequence is in use, and whatever setting of the PCRE2_DOTALL and + PCRE2_MULTILINE options is used. A class such as [^a] always matches one of these characters. - The character escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, \V, + The character escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, \V, \w, and \W may appear in a character class, and add the characters that - they match to the class. For example, [\dABCDEF] matches any hexadeci- - mal digit. In UTF modes, the PCRE2_UCP option affects the meanings of - \d, \s, \w and their upper case partners, just as it does when they - appear outside a character class, as described in the section entitled + they match to the class. For example, [\dABCDEF] matches any hexadeci- + mal digit. In UTF modes, the PCRE2_UCP option affects the meanings of + \d, \s, \w and their upper case partners, just as it does when they + appear outside a character class, as described in the section entitled "Generic character types" above. The escape sequence \b has a different - meaning inside a character class; it matches the backspace character. - The sequences \B, \N, \R, and \X are not special inside a character - class. Like any other unrecognized escape sequences, they cause an + meaning inside a character class; it matches the backspace character. + The sequences \B, \N, \R, and \X are not special inside a character + class. Like any other unrecognized escape sequences, they cause an error. - The minus (hyphen) character can be used to specify a range of charac- - ters in a character class. For example, [d-m] matches any letter - between d and m, inclusive. If a minus character is required in a - class, it must be escaped with a backslash or appear in a position - where it cannot be interpreted as indicating a range, typically as the + The minus (hyphen) character can be used to specify a range of charac- + ters in a character class. For example, [d-m] matches any letter + between d and m, inclusive. If a minus character is required in a + class, it must be escaped with a backslash or appear in a position + where it cannot be interpreted as indicating a range, typically as the first or last character in the class, or immediately after a range. For - example, [b-d-z] matches letters in the range b to d, a hyphen charac- + example, [b-d-z] matches letters in the range b to d, a hyphen charac- ter, or z. Perl treats a hyphen as a literal if it appears before or after a POSIX class (see below) or a character type escape such as as \d, but gives a - warning in its warning mode, as this is most likely a user error. As + warning in its warning mode, as this is most likely a user error. As PCRE2 has no facility for warning, an error is given in these cases. It is not possible to have the literal character "]" as the end charac- - ter of a range. A pattern such as [W-]46] is interpreted as a class of - two characters ("W" and "-") followed by a literal string "46]", so it - would match "W46]" or "-46]". However, if the "]" is escaped with a - backslash it is interpreted as the end of range, so [W-\]46] is inter- - preted as a class containing a range followed by two other characters. - The octal or hexadecimal representation of "]" can also be used to end + ter of a range. A pattern such as [W-]46] is interpreted as a class of + two characters ("W" and "-") followed by a literal string "46]", so it + would match "W46]" or "-46]". However, if the "]" is escaped with a + backslash it is interpreted as the end of range, so [W-\]46] is inter- + preted as a class containing a range followed by two other characters. + The octal or hexadecimal representation of "]" can also be used to end a range. Ranges normally include all code points between the start and end char- - acters, inclusive. They can also be used for code points specified + acters, inclusive. They can also be used for code points specified numerically, for example [\000-\037]. Ranges can include any characters that are valid for the current mode. - There is a special case in EBCDIC environments for ranges whose end + There is a special case in EBCDIC environments for ranges whose end points are both specified as literal letters in the same case. For com- - patibility with Perl, EBCDIC code points within the range that are not - letters are omitted. For example, [h-k] matches only four characters, + patibility with Perl, EBCDIC code points within the range that are not + letters are omitted. For example, [h-k] matches only four characters, even though the codes for h and k are 0x88 and 0x92, a range of 11 code - points. However, if the range is specified numerically, for example, + points. However, if the range is specified numerically, for example, [\x88-\x92] or [h-\x92], all code points are included. If a range that includes letters is used when caseless matching is set, it matches the letters in either case. For example, [W-c] is equivalent - to [][\\^_`wxyzabc], matched caselessly, and in a non-UTF mode, if - character tables for a French locale are in use, [\xc8-\xcb] matches + to [][\\^_`wxyzabc], matched caselessly, and in a non-UTF mode, if + character tables for a French locale are in use, [\xc8-\xcb] matches accented E characters in both cases. - A circumflex can conveniently be used with the upper case character - types to specify a more restricted set of characters than the matching - lower case type. For example, the class [^\W_] matches any letter or + A circumflex can conveniently be used with the upper case character + types to specify a more restricted set of characters than the matching + lower case type. For example, the class [^\W_] matches any letter or digit, but not underscore, whereas [\w] includes underscore. A positive character class should be read as "something OR something OR ..." and a negative class as "NOT something AND NOT something AND NOT ...". - The only metacharacters that are recognized in character classes are - backslash, hyphen (only where it can be interpreted as specifying a - range), circumflex (only at the start), opening square bracket (only - when it can be interpreted as introducing a POSIX class name, or for a - special compatibility feature - see the next two sections), and the + The only metacharacters that are recognized in character classes are + backslash, hyphen (only where it can be interpreted as specifying a + range), circumflex (only at the start), opening square bracket (only + when it can be interpreted as introducing a POSIX class name, or for a + special compatibility feature - see the next two sections), and the terminating closing square bracket. However, escaping other non- alphanumeric characters does no harm. @@ -6771,7 +6772,7 @@ SQUARE BRACKETS AND CHARACTER CLASSES POSIX CHARACTER CLASSES Perl supports the POSIX notation for character classes. This uses names - enclosed by [: and :] within the enclosing square brackets. PCRE2 also + enclosed by [: and :] within the enclosing square brackets. PCRE2 also supports this notation. For example, [01[:alpha:]%] @@ -6794,13 +6795,13 @@ POSIX CHARACTER CLASSES word "word" characters (same as \w) xdigit hexadecimal digits - The default "space" characters are HT (9), LF (10), VT (11), FF (12), - CR (13), and space (32). If locale-specific matching is taking place, - the list of space characters may be different; there may be fewer or + The default "space" characters are HT (9), LF (10), VT (11), FF (12), + CR (13), and space (32). If locale-specific matching is taking place, + the list of space characters may be different; there may be fewer or more of them. "Space" and \s match the same set of characters. - The name "word" is a Perl extension, and "blank" is a GNU extension - from Perl 5.8. Another Perl extension is negation, which is indicated + The name "word" is a Perl extension, and "blank" is a GNU extension + from Perl 5.8. Another Perl extension is negation, which is indicated by a ^ character after the colon. For example, [12[:^digit:]] @@ -6811,9 +6812,9 @@ POSIX CHARACTER CLASSES By default, characters with values greater than 127 do not match any of the POSIX character classes, although this may be different for charac- - ters in the range 128-255 when locale-specific matching is happening. - However, if the PCRE2_UCP option is passed to pcre2_compile(), some of - the classes are changed so that Unicode character properties are used. + ters in the range 128-255 when locale-specific matching is happening. + However, if the PCRE2_UCP option is passed to pcre2_compile(), some of + the classes are changed so that Unicode character properties are used. This is achieved by replacing certain POSIX classes with other sequences, as follows: @@ -6827,10 +6828,10 @@ POSIX CHARACTER CLASSES [:upper:] becomes \p{Lu} [:word:] becomes \p{Xwd} - Negated versions, such as [:^alpha:] use \P instead of \p. Three other + Negated versions, such as [:^alpha:] use \P instead of \p. Three other POSIX classes are handled specially in UCP mode: - [:graph:] This matches characters that have glyphs that mark the page + [:graph:] This matches characters that have glyphs that mark the page when printed. In Unicode property terms, it matches all char- acters with the L, M, N, P, S, or Cf properties, except for: @@ -6839,59 +6840,59 @@ POSIX CHARACTER CLASSES U+2066 - U+2069 Various "isolate"s - [:print:] This matches the same characters as [:graph:] plus space - characters that are not controls, that is, characters with + [:print:] This matches the same characters as [:graph:] plus space + characters that are not controls, that is, characters with the Zs property. [:punct:] This matches all characters that have the Unicode P (punctua- - tion) property, plus those characters with code points less + tion) property, plus those characters with code points less than 256 that have the S (Symbol) property. - The other POSIX classes are unchanged, and match only characters with + The other POSIX classes are unchanged, and match only characters with code points less than 256. COMPATIBILITY FEATURE FOR WORD BOUNDARIES - In the POSIX.2 compliant library that was included in 4.4BSD Unix, the - ugly syntax [[:<:]] and [[:>:]] is used for matching "start of word" + In the POSIX.2 compliant library that was included in 4.4BSD Unix, the + ugly syntax [[:<:]] and [[:>:]] is used for matching "start of word" and "end of word". PCRE2 treats these items as follows: [[:<:]] is converted to \b(?=\w) [[:>:]] is converted to \b(?<=\w) Only these exact character sequences are recognized. A sequence such as - [a[:<:]b] provokes error for an unrecognized POSIX class name. This - support is not compatible with Perl. It is provided to help migrations + [a[:<:]b] provokes error for an unrecognized POSIX class name. This + support is not compatible with Perl. It is provided to help migrations from other environments, and is best not used in any new patterns. Note - that \b matches at the start and the end of a word (see "Simple asser- - tions" above), and in a Perl-style pattern the preceding or following - character normally shows which is wanted, without the need for the - assertions that are used above in order to give exactly the POSIX be- + that \b matches at the start and the end of a word (see "Simple asser- + tions" above), and in a Perl-style pattern the preceding or following + character normally shows which is wanted, without the need for the + assertions that are used above in order to give exactly the POSIX be- haviour. VERTICAL BAR - Vertical bar characters are used to separate alternative patterns. For + Vertical bar characters are used to separate alternative patterns. For example, the pattern gilbert|sullivan - matches either "gilbert" or "sullivan". Any number of alternatives may - appear, and an empty alternative is permitted (matching the empty + matches either "gilbert" or "sullivan". Any number of alternatives may + appear, and an empty alternative is permitted (matching the empty string). The matching process tries each alternative in turn, from left - to right, and the first one that succeeds is used. If the alternatives - are within a subpattern (defined below), "succeeds" means matching the + to right, and the first one that succeeds is used. If the alternatives + are within a subpattern (defined below), "succeeds" means matching the rest of the main pattern as well as the alternative in the subpattern. INTERNAL OPTION SETTING - The settings of the PCRE2_CASELESS, PCRE2_MULTILINE, PCRE2_DOTALL, - PCRE2_EXTENDED, PCRE2_EXTENDED_MORE, and PCRE2_NO_AUTO_CAPTURE options + The settings of the PCRE2_CASELESS, PCRE2_MULTILINE, PCRE2_DOTALL, + PCRE2_EXTENDED, PCRE2_EXTENDED_MORE, and PCRE2_NO_AUTO_CAPTURE options (which are Perl-compatible) can be changed from within the pattern by a - sequence of Perl option letters enclosed between "(?" and ")". The + sequence of Perl option letters enclosed between "(?" and ")". The option letters are i for PCRE2_CASELESS @@ -6902,43 +6903,43 @@ INTERNAL OPTION SETTING xx for PCRE2_EXTENDED_MORE For example, (?im) sets caseless, multiline matching. It is also possi- - ble to unset these options by preceding the letter with a hyphen. The - two "extended" options are not independent; unsetting either one can- + ble to unset these options by preceding the letter with a hyphen. The + two "extended" options are not independent; unsetting either one can- cels the effects of both of them. - A combined setting and unsetting such as (?im-sx), which sets - PCRE2_CASELESS and PCRE2_MULTILINE while unsetting PCRE2_DOTALL and - PCRE2_EXTENDED, is also permitted. If a letter appears both before and - after the hyphen, the option is unset. An empty options setting "(?)" + A combined setting and unsetting such as (?im-sx), which sets + PCRE2_CASELESS and PCRE2_MULTILINE while unsetting PCRE2_DOTALL and + PCRE2_EXTENDED, is also permitted. If a letter appears both before and + after the hyphen, the option is unset. An empty options setting "(?)" is allowed. Needless to say, it has no effect. - The PCRE2-specific options PCRE2_DUPNAMES and PCRE2_UNGREEDY can be - changed in the same way as the Perl-compatible options by using the + The PCRE2-specific options PCRE2_DUPNAMES and PCRE2_UNGREEDY can be + changed in the same way as the Perl-compatible options by using the characters J and U respectively. - When one of these option changes occurs at top level (that is, not - inside subpattern parentheses), the change applies to the remainder of - the pattern that follows. An option change within a subpattern (see - below for a description of subpatterns) affects only that part of the + When one of these option changes occurs at top level (that is, not + inside subpattern parentheses), the change applies to the remainder of + the pattern that follows. An option change within a subpattern (see + below for a description of subpatterns) affects only that part of the subpattern that follows it, so (a(?i)b)c - matches abc and aBc and no other strings (assuming PCRE2_CASELESS is - not used). By this means, options can be made to have different set- + matches abc and aBc and no other strings (assuming PCRE2_CASELESS is + not used). By this means, options can be made to have different set- tings in different parts of the pattern. Any changes made in one alter- native do carry on into subsequent branches within the same subpattern. For example, (a(?i)b|c) - matches "ab", "aB", "c", and "C", even though when matching "C" the - first branch is abandoned before the option setting. This is because - the effects of option settings happen at compile time. There would be + matches "ab", "aB", "c", and "C", even though when matching "C" the + first branch is abandoned before the option setting. This is because + the effects of option settings happen at compile time. There would be some very weird behaviour otherwise. - As a convenient shorthand, if any option settings are required at the - start of a non-capturing subpattern (see the next section), the option + As a convenient shorthand, if any option settings are required at the + start of a non-capturing subpattern (see the next section), the option letters may appear between the "?" and the ":". Thus the two patterns (?i:saturday|sunday) @@ -6946,14 +6947,14 @@ INTERNAL OPTION SETTING match exactly the same set of strings. - Note: There are other PCRE2-specific options that can be set by the + Note: There are other PCRE2-specific options that can be set by the application when the compiling function is called. The pattern can con- - tain special leading sequences such as (*CRLF) to override what the - application has set or what has been defaulted. Details are given in - the section entitled "Newline sequences" above. There are also the - (*UTF) and (*UCP) leading sequences that can be used to set UTF and - Unicode property modes; they are equivalent to setting the PCRE2_UTF - and PCRE2_UCP options, respectively. However, the application can set + tain special leading sequences such as (*CRLF) to override what the + application has set or what has been defaulted. Details are given in + the section entitled "Newline sequences" above. There are also the + (*UTF) and (*UCP) leading sequences that can be used to set UTF and + Unicode property modes; they are equivalent to setting the PCRE2_UTF + and PCRE2_UCP options, respectively. However, the application can set the PCRE2_NEVER_UTF and PCRE2_NEVER_UCP options, which lock out the use of the (*UTF) and (*UCP) sequences. @@ -6967,18 +6968,18 @@ SUBPATTERNS cat(aract|erpillar|) - matches "cataract", "caterpillar", or "cat". Without the parentheses, + matches "cataract", "caterpillar", or "cat". Without the parentheses, it would match "cataract", "erpillar" or an empty string. - 2. It sets up the subpattern as a capturing subpattern. This means + 2. It sets up the subpattern as a capturing subpattern. This means that, when the whole pattern matches, the portion of the subject string - that matched the subpattern is passed back to the caller, separately - from the portion that matched the whole pattern. (This applies only to - the traditional matching function; the DFA matching function does not + that matched the subpattern is passed back to the caller, separately + from the portion that matched the whole pattern. (This applies only to + the traditional matching function; the DFA matching function does not support capturing.) Opening parentheses are counted from left to right (starting from 1) to - obtain numbers for the capturing subpatterns. For example, if the + obtain numbers for the capturing subpatterns. For example, if the string "the red king" is matched against the pattern the ((red|white) (king|queen)) @@ -6986,12 +6987,12 @@ SUBPATTERNS the captured substrings are "red king", "red", and "king", and are num- bered 1, 2, and 3, respectively. - The fact that plain parentheses fulfil two functions is not always - helpful. There are often times when a grouping subpattern is required - without a capturing requirement. If an opening parenthesis is followed - by a question mark and a colon, the subpattern does not do any captur- - ing, and is not counted when computing the number of any subsequent - capturing subpatterns. For example, if the string "the white queen" is + The fact that plain parentheses fulfil two functions is not always + helpful. There are often times when a grouping subpattern is required + without a capturing requirement. If an opening parenthesis is followed + by a question mark and a colon, the subpattern does not do any captur- + ing, and is not counted when computing the number of any subsequent + capturing subpatterns. For example, if the string "the white queen" is matched against the pattern the ((?:red|white) (king|queen)) @@ -6999,37 +7000,37 @@ SUBPATTERNS the captured substrings are "white queen" and "queen", and are numbered 1 and 2. The maximum number of capturing subpatterns is 65535. - As a convenient shorthand, if any option settings are required at the - start of a non-capturing subpattern, the option letters may appear + As a convenient shorthand, if any option settings are required at the + start of a non-capturing subpattern, the option letters may appear between the "?" and the ":". Thus the two patterns (?i:saturday|sunday) (?:(?i)saturday|sunday) match exactly the same set of strings. Because alternative branches are - tried from left to right, and options are not reset until the end of - the subpattern is reached, an option setting in one branch does affect - subsequent branches, so the above patterns match "SUNDAY" as well as + tried from left to right, and options are not reset until the end of + the subpattern is reached, an option setting in one branch does affect + subsequent branches, so the above patterns match "SUNDAY" as well as "Saturday". DUPLICATE SUBPATTERN NUMBERS Perl 5.10 introduced a feature whereby each alternative in a subpattern - uses the same numbers for its capturing parentheses. Such a subpattern - starts with (?| and is itself a non-capturing subpattern. For example, + uses the same numbers for its capturing parentheses. Such a subpattern + starts with (?| and is itself a non-capturing subpattern. For example, consider this pattern: (?|(Sat)ur|(Sun))day - Because the two alternatives are inside a (?| group, both sets of cap- - turing parentheses are numbered one. Thus, when the pattern matches, - you can look at captured substring number one, whichever alternative - matched. This construct is useful when you want to capture part, but + Because the two alternatives are inside a (?| group, both sets of cap- + turing parentheses are numbered one. Thus, when the pattern matches, + you can look at captured substring number one, whichever alternative + matched. This construct is useful when you want to capture part, but not all, of one of a number of alternatives. Inside a (?| group, paren- - theses are numbered as usual, but the number is reset at the start of - each branch. The numbers of any capturing parentheses that follow the - subpattern start after the highest number used in any branch. The fol- + theses are numbered as usual, but the number is reset at the start of + each branch. The numbers of any capturing parentheses that follow the + subpattern start after the highest number used in any branch. The fol- lowing example is taken from the Perl documentation. The numbers under- neath show in which buffer the captured content will be stored. @@ -7037,14 +7038,14 @@ DUPLICATE SUBPATTERN NUMBERS / ( a ) (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x # 1 2 2 3 2 3 4 - A back reference to a numbered subpattern uses the most recent value - that is set for that number by any subpattern. The following pattern + A back reference to a numbered subpattern uses the most recent value + that is set for that number by any subpattern. The following pattern matches "abcabc" or "defdef": /(?|(abc)|(def))\1/ - In contrast, a subroutine call to a numbered subpattern always refers - to the first one in the pattern with the given number. The following + In contrast, a subroutine call to a numbered subpattern always refers + to the first one in the pattern with the given number. The following pattern matches "abcabc" or "defabc": /(?|(abc)|(def))(?1)/ @@ -7052,47 +7053,47 @@ DUPLICATE SUBPATTERN NUMBERS A relative reference such as (?-1) is no different: it is just a conve- nient way of computing an absolute group number. - If a condition test for a subpattern's having matched refers to a non- - unique number, the test is true if any of the subpatterns of that num- + If a condition test for a subpattern's having matched refers to a non- + unique number, the test is true if any of the subpatterns of that num- ber have matched. - An alternative approach to using this "branch reset" feature is to use + An alternative approach to using this "branch reset" feature is to use duplicate named subpatterns, as described in the next section. NAMED SUBPATTERNS - Identifying capturing parentheses by number is simple, but it can be - very hard to keep track of the numbers in complicated regular expres- - sions. Furthermore, if an expression is modified, the numbers may + Identifying capturing parentheses by number is simple, but it can be + very hard to keep track of the numbers in complicated regular expres- + sions. Furthermore, if an expression is modified, the numbers may change. To help with this difficulty, PCRE2 supports the naming of sub- patterns. This feature was not added to Perl until release 5.10. Python - had the feature earlier, and PCRE1 introduced it at release 4.0, using - the Python syntax. PCRE2 supports both the Perl and the Python syntax. - Perl allows identically numbered subpatterns to have different names, + had the feature earlier, and PCRE1 introduced it at release 4.0, using + the Python syntax. PCRE2 supports both the Perl and the Python syntax. + Perl allows identically numbered subpatterns to have different names, but PCRE2 does not. - In PCRE2, a subpattern can be named in one of three ways: (?...) - or (?'name'...) as in Perl, or (?P ...) as in Python. References - to capturing parentheses from other parts of the pattern, such as back - references, recursion, and conditions, can be made by name as well as + In PCRE2, a subpattern can be named in one of three ways: (? ...) + or (?'name'...) as in Perl, or (?P ...) as in Python. References + to capturing parentheses from other parts of the pattern, such as back + references, recursion, and conditions, can be made by name as well as by number. - Names consist of up to 32 alphanumeric characters and underscores, but - must start with a non-digit. Named capturing parentheses are still - allocated numbers as well as names, exactly as if the names were not + Names consist of up to 32 alphanumeric characters and underscores, but + must start with a non-digit. Named capturing parentheses are still + allocated numbers as well as names, exactly as if the names were not present. The PCRE2 API provides function calls for extracting the name- - to-number translation table from a compiled pattern. There are also + to-number translation table from a compiled pattern. There are also convenience functions for extracting a captured substring by name. - By default, a name must be unique within a pattern, but it is possible - to relax this constraint by setting the PCRE2_DUPNAMES option at com- - pile time. (Duplicate names are also always permitted for subpatterns - with the same number, set up as described in the previous section.) - Duplicate names can be useful for patterns where only one instance of + By default, a name must be unique within a pattern, but it is possible + to relax this constraint by setting the PCRE2_DUPNAMES option at com- + pile time. (Duplicate names are also always permitted for subpatterns + with the same number, set up as described in the previous section.) + Duplicate names can be useful for patterns where only one instance of the named parentheses can match. Suppose you want to match the name of - a weekday, either as a 3-letter abbreviation or as the full name, and - in both cases you want to extract the abbreviation. This pattern + a weekday, either as a 3-letter abbreviation or as the full name, and + in both cases you want to extract the abbreviation. This pattern (ignoring the line breaks) does the job: (? Mon|Fri|Sun)(?:day)?| @@ -7101,18 +7102,18 @@ NAMED SUBPATTERNS (? Thu)(?:rsday)?| (? Sat)(?:urday)? - There are five capturing substrings, but only one is ever set after a + There are five capturing substrings, but only one is ever set after a match. (An alternative way of solving this problem is to use a "branch reset" subpattern, as described in the previous section.) - The convenience functions for extracting the data by name returns the - substring for the first (and in this example, the only) subpattern of - that name that matched. This saves searching to find which numbered + The convenience functions for extracting the data by name returns the + substring for the first (and in this example, the only) subpattern of + that name that matched. This saves searching to find which numbered subpattern it was. - If you make a back reference to a non-unique named subpattern from - elsewhere in the pattern, the subpatterns to which the name refers are - checked in the order in which they appear in the overall pattern. The + If you make a back reference to a non-unique named subpattern from + elsewhere in the pattern, the subpatterns to which the name refers are + checked in the order in which they appear in the overall pattern. The first one that is set is used for the reference. For example, this pat- tern matches both "foofoo" and "barbar" but not "foobar" or "barfoo": @@ -7120,29 +7121,29 @@ NAMED SUBPATTERNS If you make a subroutine call to a non-unique named subpattern, the one - that corresponds to the first occurrence of the name is used. In the + that corresponds to the first occurrence of the name is used. In the absence of duplicate numbers (see the previous section) this is the one with the lowest number. If you use a named reference in a condition test (see the section about conditions below), either to check whether a subpattern has matched, or - to check for recursion, all subpatterns with the same name are tested. - If the condition is true for any one of them, the overall condition is - true. This is the same behaviour as testing by number. For further - details of the interfaces for handling named subpatterns, see the + to check for recursion, all subpatterns with the same name are tested. + If the condition is true for any one of them, the overall condition is + true. This is the same behaviour as testing by number. For further + details of the interfaces for handling named subpatterns, see the pcre2api documentation. Warning: You cannot use different names to distinguish between two sub- - patterns with the same number because PCRE2 uses only the numbers when + patterns with the same number because PCRE2 uses only the numbers when matching. For this reason, an error is given at compile time if differ- - ent names are given to subpatterns with the same number. However, you + ent names are given to subpatterns with the same number. However, you can always give the same name to subpatterns with the same number, even when PCRE2_DUPNAMES is not set. REPETITION - Repetition is specified by quantifiers, which can follow any of the + Repetition is specified by quantifiers, which can follow any of the following items: a literal data character @@ -7156,17 +7157,17 @@ REPETITION a parenthesized subpattern (including most assertions) a subroutine call to a subpattern (recursive or otherwise) - The general repetition quantifier specifies a minimum and maximum num- - ber of permitted matches, by giving the two numbers in curly brackets - (braces), separated by a comma. The numbers must be less than 65536, + The general repetition quantifier specifies a minimum and maximum num- + ber of permitted matches, by giving the two numbers in curly brackets + (braces), separated by a comma. The numbers must be less than 65536, and the first must be less than or equal to the second. For example: z{2,4} - matches "zz", "zzz", or "zzzz". A closing brace on its own is not a - special character. If the second number is omitted, but the comma is - present, there is no upper limit; if the second number and the comma - are both omitted, the quantifier specifies an exact number of required + matches "zz", "zzz", or "zzzz". A closing brace on its own is not a + special character. If the second number is omitted, but the comma is + present, there is no upper limit; if the second number and the comma + are both omitted, the quantifier specifies an exact number of required matches. Thus [aeiou]{3,} @@ -7175,50 +7176,50 @@ REPETITION \d{8} - matches exactly 8 digits. An opening curly bracket that appears in a - position where a quantifier is not allowed, or one that does not match - the syntax of a quantifier, is taken as a literal character. For exam- + matches exactly 8 digits. An opening curly bracket that appears in a + position where a quantifier is not allowed, or one that does not match + the syntax of a quantifier, is taken as a literal character. For exam- ple, {,6} is not a quantifier, but a literal string of four characters. In UTF modes, quantifiers apply to characters rather than to individual - code units. Thus, for example, \x{100}{2} matches two characters, each + code units. Thus, for example, \x{100}{2} matches two characters, each of which is represented by a two-byte sequence in a UTF-8 string. Simi- - larly, \X{3} matches three Unicode extended grapheme clusters, each of - which may be several code units long (and they may be of different + larly, \X{3} matches three Unicode extended grapheme clusters, each of + which may be several code units long (and they may be of different lengths). The quantifier {0} is permitted, causing the expression to behave as if the previous item and the quantifier were not present. This may be use- - ful for subpatterns that are referenced as subroutines from elsewhere + ful for subpatterns that are referenced as subroutines from elsewhere in the pattern (but see also the section entitled "Defining subpatterns - for use by reference only" below). Items other than subpatterns that + for use by reference only" below). Items other than subpatterns that have a {0} quantifier are omitted from the compiled pattern. - For convenience, the three most common quantifiers have single-charac- + For convenience, the three most common quantifiers have single-charac- ter abbreviations: * is equivalent to {0,} + is equivalent to {1,} ? is equivalent to {0,1} - It is possible to construct infinite loops by following a subpattern + It is possible to construct infinite loops by following a subpattern that can match no characters with a quantifier that has no upper limit, for example: (a?)* - Earlier versions of Perl and PCRE1 used to give an error at compile + Earlier versions of Perl and PCRE1 used to give an error at compile time for such patterns. However, because there are cases where this can be useful, such patterns are now accepted, but if any repetition of the - subpattern does in fact match no characters, the loop is forcibly bro- + subpattern does in fact match no characters, the loop is forcibly bro- ken. - By default, the quantifiers are "greedy", that is, they match as much - as possible (up to the maximum number of permitted times), without - causing the rest of the pattern to fail. The classic example of where + By default, the quantifiers are "greedy", that is, they match as much + as possible (up to the maximum number of permitted times), without + causing the rest of the pattern to fail. The classic example of where this gives problems is in trying to match comments in C programs. These - appear between /* and */ and within the comment, individual * and / - characters may appear. An attempt to match C comments by applying the + appear between /* and */ and within the comment, individual * and / + characters may appear. An attempt to match C comments by applying the pattern /\*.*\*/ @@ -7227,19 +7228,19 @@ REPETITION /* first comment */ not comment /* second comment */ - fails, because it matches the entire string owing to the greediness of + fails, because it matches the entire string owing to the greediness of the .* item. If a quantifier is followed by a question mark, it ceases to be greedy, - and instead matches the minimum number of times possible, so the pat- + and instead matches the minimum number of times possible, so the pat- tern /\*.*?\*/ - does the right thing with the C comments. The meaning of the various - quantifiers is not otherwise changed, just the preferred number of - matches. Do not confuse this use of question mark with its use as a - quantifier in its own right. Because it has two uses, it can sometimes + does the right thing with the C comments. The meaning of the various + quantifiers is not otherwise changed, just the preferred number of + matches. Do not confuse this use of question mark with its use as a + quantifier in its own right. Because it has two uses, it can sometimes appear doubled, as in \d??\d @@ -7248,45 +7249,45 @@ REPETITION only way the rest of the pattern matches. If the PCRE2_UNGREEDY option is set (an option that is not available in - Perl), the quantifiers are not greedy by default, but individual ones - can be made greedy by following them with a question mark. In other + Perl), the quantifiers are not greedy by default, but individual ones + can be made greedy by following them with a question mark. In other words, it inverts the default behaviour. - When a parenthesized subpattern is quantified with a minimum repeat - count that is greater than 1 or with a limited maximum, more memory is - required for the compiled pattern, in proportion to the size of the + When a parenthesized subpattern is quantified with a minimum repeat + count that is greater than 1 or with a limited maximum, more memory is + required for the compiled pattern, in proportion to the size of the minimum or maximum. - If a pattern starts with .* or .{0,} and the PCRE2_DOTALL option - (equivalent to Perl's /s) is set, thus allowing the dot to match new- - lines, the pattern is implicitly anchored, because whatever follows - will be tried against every character position in the subject string, - so there is no point in retrying the overall match at any position + If a pattern starts with .* or .{0,} and the PCRE2_DOTALL option + (equivalent to Perl's /s) is set, thus allowing the dot to match new- + lines, the pattern is implicitly anchored, because whatever follows + will be tried against every character position in the subject string, + so there is no point in retrying the overall match at any position after the first. PCRE2 normally treats such a pattern as though it were preceded by \A. - In cases where it is known that the subject string contains no new- - lines, it is worth setting PCRE2_DOTALL in order to obtain this opti- + In cases where it is known that the subject string contains no new- + lines, it is worth setting PCRE2_DOTALL in order to obtain this opti- mization, or alternatively, using ^ to indicate anchoring explicitly. - However, there are some cases where the optimization cannot be used. + However, there are some cases where the optimization cannot be used. When .* is inside capturing parentheses that are the subject of a back reference elsewhere in the pattern, a match at the start may fail where a later one succeeds. Consider, for example: (.*)abc\1 - If the subject is "xyz123abc123" the match point is the fourth charac- + If the subject is "xyz123abc123" the match point is the fourth charac- ter. For this reason, such a pattern is not implicitly anchored. - Another case where implicit anchoring is not applied is when the lead- - ing .* is inside an atomic group. Once again, a match at the start may + Another case where implicit anchoring is not applied is when the lead- + ing .* is inside an atomic group. Once again, a match at the start may fail where a later one succeeds. Consider this pattern: (?>.*?a)b - It matches "ab" in the subject "aab". The use of the backtracking con- - trol verbs (*PRUNE) and (*SKIP) also disable this optimization, and + It matches "ab" in the subject "aab". The use of the backtracking con- + trol verbs (*PRUNE) and (*SKIP) also disable this optimization, and there is an option, PCRE2_NO_DOTSTAR_ANCHOR, to do so explicitly. When a capturing subpattern is repeated, the value captured is the sub- @@ -7295,8 +7296,8 @@ REPETITION (tweedle[dume]{3}\s*)+ has matched "tweedledum tweedledee" the value of the captured substring - is "tweedledee". However, if there are nested capturing subpatterns, - the corresponding captured values may have been set in previous itera- + is "tweedledee". However, if there are nested capturing subpatterns, + the corresponding captured values may have been set in previous itera- tions. For example, after (a|(b))+ @@ -7306,53 +7307,53 @@ REPETITION ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS - With both maximizing ("greedy") and minimizing ("ungreedy" or "lazy") - repetition, failure of what follows normally causes the repeated item - to be re-evaluated to see if a different number of repeats allows the - rest of the pattern to match. Sometimes it is useful to prevent this, - either to change the nature of the match, or to cause it fail earlier - than it otherwise might, when the author of the pattern knows there is + With both maximizing ("greedy") and minimizing ("ungreedy" or "lazy") + repetition, failure of what follows normally causes the repeated item + to be re-evaluated to see if a different number of repeats allows the + rest of the pattern to match. Sometimes it is useful to prevent this, + either to change the nature of the match, or to cause it fail earlier + than it otherwise might, when the author of the pattern knows there is no point in carrying on. - Consider, for example, the pattern \d+foo when applied to the subject + Consider, for example, the pattern \d+foo when applied to the subject line 123456bar After matching all 6 digits and then failing to match "foo", the normal - action of the matcher is to try again with only 5 digits matching the - \d+ item, and then with 4, and so on, before ultimately failing. - "Atomic grouping" (a term taken from Jeffrey Friedl's book) provides - the means for specifying that once a subpattern has matched, it is not + action of the matcher is to try again with only 5 digits matching the + \d+ item, and then with 4, and so on, before ultimately failing. + "Atomic grouping" (a term taken from Jeffrey Friedl's book) provides + the means for specifying that once a subpattern has matched, it is not to be re-evaluated in this way. - If we use atomic grouping for the previous example, the matcher gives - up immediately on failing to match "foo" the first time. The notation + If we use atomic grouping for the previous example, the matcher gives + up immediately on failing to match "foo" the first time. The notation is a kind of special parenthesis, starting with (?> as in this example: (?>\d+)foo - This kind of parenthesis "locks up" the part of the pattern it con- - tains once it has matched, and a failure further into the pattern is - prevented from backtracking into it. Backtracking past it to previous + This kind of parenthesis "locks up" the part of the pattern it con- + tains once it has matched, and a failure further into the pattern is + prevented from backtracking into it. Backtracking past it to previous items, however, works as normal. - An alternative description is that a subpattern of this type matches - exactly the string of characters that an identical standalone pattern + An alternative description is that a subpattern of this type matches + exactly the string of characters that an identical standalone pattern would match, if anchored at the current point in the subject string. Atomic grouping subpatterns are not capturing subpatterns. Simple cases such as the above example can be thought of as a maximizing repeat that - must swallow everything it can. So, while both \d+ and \d+? are pre- - pared to adjust the number of digits they match in order to make the + must swallow everything it can. So, while both \d+ and \d+? are pre- + pared to adjust the number of digits they match in order to make the rest of the pattern match, (?>\d+) can only match an entire sequence of digits. - Atomic groups in general can of course contain arbitrarily complicated - subpatterns, and can be nested. However, when the subpattern for an + Atomic groups in general can of course contain arbitrarily complicated + subpatterns, and can be nested. However, when the subpattern for an atomic group is just a single repeated item, as in the example above, a - simpler notation, called a "possessive quantifier" can be used. This - consists of an additional + character following a quantifier. Using + simpler notation, called a "possessive quantifier" can be used. This + consists of an additional + character following a quantifier. Using this notation, the previous example can be rewritten as \d++foo @@ -7362,46 +7363,46 @@ ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS (abc|xyz){2,3}+ - Possessive quantifiers are always greedy; the setting of the - PCRE2_UNGREEDY option is ignored. They are a convenient notation for - the simpler forms of atomic group. However, there is no difference in + Possessive quantifiers are always greedy; the setting of the + PCRE2_UNGREEDY option is ignored. They are a convenient notation for + the simpler forms of atomic group. However, there is no difference in the meaning of a possessive quantifier and the equivalent atomic group, - though there may be a performance difference; possessive quantifiers + though there may be a performance difference; possessive quantifiers should be slightly faster. - The possessive quantifier syntax is an extension to the Perl 5.8 syn- - tax. Jeffrey Friedl originated the idea (and the name) in the first + The possessive quantifier syntax is an extension to the Perl 5.8 syn- + tax. Jeffrey Friedl originated the idea (and the name) in the first edition of his book. Mike McCloskey liked it, so implemented it when he built Sun's Java package, and PCRE1 copied it from there. It ultimately found its way into Perl at release 5.10. - PCRE2 has an optimization that automatically "possessifies" certain - simple pattern constructs. For example, the sequence A+B is treated as - A++B because there is no point in backtracking into a sequence of A's + PCRE2 has an optimization that automatically "possessifies" certain + simple pattern constructs. For example, the sequence A+B is treated as + A++B because there is no point in backtracking into a sequence of A's when B must follow. This feature can be disabled by the PCRE2_NO_AUTO- POSSESS option, or starting the pattern with (*NO_AUTO_POSSESS). - When a pattern contains an unlimited repeat inside a subpattern that - can itself be repeated an unlimited number of times, the use of an - atomic group is the only way to avoid some failing matches taking a + When a pattern contains an unlimited repeat inside a subpattern that + can itself be repeated an unlimited number of times, the use of an + atomic group is the only way to avoid some failing matches taking a very long time indeed. The pattern (\D+|<\d+>)*[!?] - matches an unlimited number of substrings that either consist of non- - digits, or digits enclosed in <>, followed by either ! or ?. When it + matches an unlimited number of substrings that either consist of non- + digits, or digits enclosed in <>, followed by either ! or ?. When it matches, it runs quickly. However, if it is applied to aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa - it takes a long time before reporting failure. This is because the - string can be divided between the internal \D+ repeat and the external - * repeat in a large number of ways, and all have to be tried. (The - example uses [!?] rather than a single character at the end, because - both PCRE2 and Perl have an optimization that allows for fast failure - when a single character is used. They remember the last single charac- - ter that is required for a match, and fail early if it is not present - in the string.) If the pattern is changed so that it uses an atomic + it takes a long time before reporting failure. This is because the + string can be divided between the internal \D+ repeat and the external + * repeat in a large number of ways, and all have to be tried. (The + example uses [!?] rather than a single character at the end, because + both PCRE2 and Perl have an optimization that allows for fast failure + when a single character is used. They remember the last single charac- + ter that is required for a match, and fail early if it is not present + in the string.) If the pattern is changed so that it uses an atomic group, like this: ((?>\D+)|<\d+>)*[!?] @@ -7413,28 +7414,28 @@ BACK REFERENCES Outside a character class, a backslash followed by a digit greater than 0 (and possibly further digits) is a back reference to a capturing sub- - pattern earlier (that is, to its left) in the pattern, provided there + pattern earlier (that is, to its left) in the pattern, provided there have been that many previous capturing left parentheses. - However, if the decimal number following the backslash is less than 8, - it is always taken as a back reference, and causes an error only if - there are not that many capturing left parentheses in the entire pat- - tern. In other words, the parentheses that are referenced need not be - to the left of the reference for numbers less than 8. A "forward back - reference" of this type can make sense when a repetition is involved - and the subpattern to the right has participated in an earlier itera- + However, if the decimal number following the backslash is less than 8, + it is always taken as a back reference, and causes an error only if + there are not that many capturing left parentheses in the entire pat- + tern. In other words, the parentheses that are referenced need not be + to the left of the reference for numbers less than 8. A "forward back + reference" of this type can make sense when a repetition is involved + and the subpattern to the right has participated in an earlier itera- tion. - It is not possible to have a numerical "forward back reference" to a - subpattern whose number is 8 or more using this syntax because a - sequence such as \50 is interpreted as a character defined in octal. + It is not possible to have a numerical "forward back reference" to a + subpattern whose number is 8 or more using this syntax because a + sequence such as \50 is interpreted as a character defined in octal. See the subsection entitled "Non-printing characters" above for further - details of the handling of digits following a backslash. There is no - such problem when named parentheses are used. A back reference to any + details of the handling of digits following a backslash. There is no + such problem when named parentheses are used. A back reference to any subpattern is possible using named parentheses (see below). - Another way of avoiding the ambiguity inherent in the use of digits - following a backslash is to use the \g escape sequence. This escape + Another way of avoiding the ambiguity inherent in the use of digits + following a backslash is to use the \g escape sequence. This escape must be followed by a signed or unsigned number, optionally enclosed in braces. These examples are all identical: @@ -7442,46 +7443,46 @@ BACK REFERENCES (ring), \g1 (ring), \g{1} - An unsigned number specifies an absolute reference without the ambigu- + An unsigned number specifies an absolute reference without the ambigu- ity that is present in the older syntax. It is also useful when literal - digits follow the reference. A signed number is a relative reference. + digits follow the reference. A signed number is a relative reference. Consider this example: (abc(def)ghi)\g{-1} The sequence \g{-1} is a reference to the most recently started captur- ing subpattern before \g, that is, is it equivalent to \2 in this exam- - ple. Similarly, \g{-2} would be equivalent to \1. The use of relative - references can be helpful in long patterns, and also in patterns that - are created by joining together fragments that contain references + ple. Similarly, \g{-2} would be equivalent to \1. The use of relative + references can be helpful in long patterns, and also in patterns that + are created by joining together fragments that contain references within themselves. - The sequence \g{+1} is a reference to the next capturing subpattern. - This kind of forward reference can be useful it patterns that repeat. + The sequence \g{+1} is a reference to the next capturing subpattern. + This kind of forward reference can be useful it patterns that repeat. Perl does not support the use of + in this way. - A back reference matches whatever actually matched the capturing sub- - pattern in the current subject string, rather than anything matching + A back reference matches whatever actually matched the capturing sub- + pattern in the current subject string, rather than anything matching the subpattern itself (see "Subpatterns as subroutines" below for a way of doing that). So the pattern (sens|respons)e and \1ibility - matches "sense and sensibility" and "response and responsibility", but - not "sense and responsibility". If caseful matching is in force at the - time of the back reference, the case of letters is relevant. For exam- + matches "sense and sensibility" and "response and responsibility", but + not "sense and responsibility". If caseful matching is in force at the + time of the back reference, the case of letters is relevant. For exam- ple, ((?i)rah)\s+\1 - matches "rah rah" and "RAH RAH", but not "RAH rah", even though the + matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original capturing subpattern is matched caselessly. - There are several different ways of writing back references to named - subpatterns. The .NET syntax \k{name} and the Perl syntax \k or - \k'name' are supported, as is the Python syntax (?P=name). Perl 5.10's + There are several different ways of writing back references to named + subpatterns. The .NET syntax \k{name} and the Perl syntax \k or + \k'name' are supported, as is the Python syntax (?P=name). Perl 5.10's unified back reference syntax, in which \g can be used for both numeric - and named references, is also supported. We could rewrite the above + and named references, is also supported. We could rewrite the above example in any of the following ways: (? (?i)rah)\s+\k @@ -7489,96 +7490,96 @@ BACK REFERENCES (?P (?i)rah)\s+(?P=p1) (? (?i)rah)\s+\g{p1} - A subpattern that is referenced by name may appear in the pattern + A subpattern that is referenced by name may appear in the pattern before or after the reference. - There may be more than one back reference to the same subpattern. If a - subpattern has not actually been used in a particular match, any back + There may be more than one back reference to the same subpattern. If a + subpattern has not actually been used in a particular match, any back references to it always fail by default. For example, the pattern (a|(bc))\2 - always fails if it starts to match "a" rather than "bc". However, if - the PCRE2_MATCH_UNSET_BACKREF option is set at compile time, a back + always fails if it starts to match "a" rather than "bc". However, if + the PCRE2_MATCH_UNSET_BACKREF option is set at compile time, a back reference to an unset value matches an empty string. - Because there may be many capturing parentheses in a pattern, all dig- - its following a backslash are taken as part of a potential back refer- - ence number. If the pattern continues with a digit character, some - delimiter must be used to terminate the back reference. If the - PCRE2_EXTENDED option is set, this can be white space. Otherwise, the + Because there may be many capturing parentheses in a pattern, all dig- + its following a backslash are taken as part of a potential back refer- + ence number. If the pattern continues with a digit character, some + delimiter must be used to terminate the back reference. If the + PCRE2_EXTENDED option is set, this can be white space. Otherwise, the \g{ syntax or an empty comment (see "Comments" below) can be used. Recursive back references - A back reference that occurs inside the parentheses to which it refers - fails when the subpattern is first used, so, for example, (a\1) never - matches. However, such references can be useful inside repeated sub- + A back reference that occurs inside the parentheses to which it refers + fails when the subpattern is first used, so, for example, (a\1) never + matches. However, such references can be useful inside repeated sub- patterns. For example, the pattern (a|b\1)+ matches any number of "a"s and also "aba", "ababbaa" etc. At each iter- - ation of the subpattern, the back reference matches the character - string corresponding to the previous iteration. In order for this to - work, the pattern must be such that the first iteration does not need - to match the back reference. This can be done using alternation, as in + ation of the subpattern, the back reference matches the character + string corresponding to the previous iteration. In order for this to + work, the pattern must be such that the first iteration does not need + to match the back reference. This can be done using alternation, as in the example above, or by a quantifier with a minimum of zero. - Back references of this type cause the group that they reference to be - treated as an atomic group. Once the whole group has been matched, a - subsequent matching failure cannot cause backtracking into the middle + Back references of this type cause the group that they reference to be + treated as an atomic group. Once the whole group has been matched, a + subsequent matching failure cannot cause backtracking into the middle of the group. ASSERTIONS - An assertion is a test on the characters following or preceding the + An assertion is a test on the characters following or preceding the current matching point that does not consume any characters. The simple - assertions coded as \b, \B, \A, \G, \Z, \z, ^ and $ are described + assertions coded as \b, \B, \A, \G, \Z, \z, ^ and $ are described above. - More complicated assertions are coded as subpatterns. There are two - kinds: those that look ahead of the current position in the subject - string, and those that look behind it, and in each case an assertion - may be positive (must succeed for matching to continue) or negative + More complicated assertions are coded as subpatterns. There are two + kinds: those that look ahead of the current position in the subject + string, and those that look behind it, and in each case an assertion + may be positive (must succeed for matching to continue) or negative (must not succeed for matching to continue). An assertion subpattern is - matched in the normal way, except that, when matching continues after- - wards, the matching position in the subject string is as it was at the + matched in the normal way, except that, when matching continues after- + wards, the matching position in the subject string is as it was at the start of the assertion. - Assertion subpatterns are not capturing subpatterns. If an assertion - contains capturing subpatterns within it, these are counted for the - purposes of numbering the capturing subpatterns in the whole pattern. - However, substring capturing is carried out only for positive asser- + Assertion subpatterns are not capturing subpatterns. If an assertion + contains capturing subpatterns within it, these are counted for the + purposes of numbering the capturing subpatterns in the whole pattern. + However, substring capturing is carried out only for positive asser- tions that succeed, that is, one of their branches matches, so matching - continues after the assertion. If all branches of a positive assertion + continues after the assertion. If all branches of a positive assertion fail to match, nothing is captured, and control is passed to the previ- ous backtracking point. - No capturing is done for a negative assertion unless it is being used - as a condition in a conditional subpattern (see the discussion below). - Matching continues after a non-conditional negative assertion only if + No capturing is done for a negative assertion unless it is being used + as a condition in a conditional subpattern (see the discussion below). + Matching continues after a non-conditional negative assertion only if all its branches fail to match. - For compatibility with Perl, most assertion subpatterns may be - repeated; though it makes no sense to assert the same thing several - times, the side effect of capturing parentheses may occasionally be - useful. However, an assertion that forms the condition for a condi- - tional subpattern may not be quantified. In practice, for other asser- + For compatibility with Perl, most assertion subpatterns may be + repeated; though it makes no sense to assert the same thing several + times, the side effect of capturing parentheses may occasionally be + useful. However, an assertion that forms the condition for a condi- + tional subpattern may not be quantified. In practice, for other asser- tions, there only three cases: - (1) If the quantifier is {0}, the assertion is never obeyed during - matching. However, it may contain internal capturing parenthesized + (1) If the quantifier is {0}, the assertion is never obeyed during + matching. However, it may contain internal capturing parenthesized groups that are called from elsewhere via the subroutine mechanism. - (2) If quantifier is {0,n} where n is greater than zero, it is treated - as if it were {0,1}. At run time, the rest of the pattern match is + (2) If quantifier is {0,n} where n is greater than zero, it is treated + as if it were {0,1}. At run time, the rest of the pattern match is tried with and without the assertion, the order depending on the greed- iness of the quantifier. - (3) If the minimum repetition is greater than zero, the quantifier is - ignored. The assertion is obeyed just once when encountered during + (3) If the minimum repetition is greater than zero, the quantifier is + ignored. The assertion is obeyed just once when encountered during matching. Lookahead assertions @@ -7588,38 +7589,38 @@ ASSERTIONS \w+(?=;) - matches a word followed by a semicolon, but does not include the semi- + matches a word followed by a semicolon, but does not include the semi- colon in the match, and foo(?!bar) - matches any occurrence of "foo" that is not followed by "bar". Note + matches any occurrence of "foo" that is not followed by "bar". Note that the apparently similar pattern (?!foo)bar - does not find an occurrence of "bar" that is preceded by something - other than "foo"; it finds any occurrence of "bar" whatsoever, because + does not find an occurrence of "bar" that is preceded by something + other than "foo"; it finds any occurrence of "bar" whatsoever, because the assertion (?!foo) is always true when the next three characters are "bar". A lookbehind assertion is needed to achieve the other effect. If you want to force a matching failure at some point in a pattern, the - most convenient way to do it is with (?!) because an empty string - always matches, so an assertion that requires there not to be an empty + most convenient way to do it is with (?!) because an empty string + always matches, so an assertion that requires there not to be an empty string must always fail. The backtracking control verb (*FAIL) or (*F) is a synonym for (?!). Lookbehind assertions - Lookbehind assertions start with (?<= for positive assertions and (?)...) or (?('name')...) to test for a - used subpattern by name. For compatibility with earlier versions of - PCRE1, which had this facility before Perl, the syntax (?(name)...) is - also recognized. Note, however, that undelimited names consisting of - the letter R followed by digits are ambiguous (see the following sec- + Perl uses the syntax (?( )...) or (?('name')...) to test for a + used subpattern by name. For compatibility with earlier versions of + PCRE1, which had this facility before Perl, the syntax (?(name)...) is + also recognized. Note, however, that undelimited names consisting of + the letter R followed by digits are ambiguous (see the following sec- tion). Rewriting the above example to use a named subpattern gives this: (? \( )? [^()]+ (?( ) \) ) - If the name used in a condition of this kind is a duplicate, the test - is applied to all subpatterns of the same name, and is true if any one + If the name used in a condition of this kind is a duplicate, the test + is applied to all subpatterns of the same name, and is true if any one of them has matched. Checking for pattern recursion - "Recursion" in this sense refers to any subroutine-like call from one - part of the pattern to another, whether or not it is actually recur- - sive. See the sections entitled "Recursive patterns" and "Subpatterns + "Recursion" in this sense refers to any subroutine-like call from one + part of the pattern to another, whether or not it is actually recur- + sive. See the sections entitled "Recursive patterns" and "Subpatterns as subroutines" below for details of recursion and subpattern calls. - If a condition is the string (R), and there is no subpattern with the - name R, the condition is true if matching is currently in a recursion - or subroutine call to the whole pattern or any subpattern. If digits - follow the letter R, and there is no subpattern with that name, the + If a condition is the string (R), and there is no subpattern with the + name R, the condition is true if matching is currently in a recursion + or subroutine call to the whole pattern or any subpattern. If digits + follow the letter R, and there is no subpattern with that name, the condition is true if the most recent call is into a subpattern with the - given number, which must exist somewhere in the overall pattern. This + given number, which must exist somewhere in the overall pattern. This is a contrived example that is equivalent to a+b: ((?(R1)a+|(?1)b)) - However, in both cases, if there is a subpattern with a matching name, - the condition tests for its being set, as described in the section - above, instead of testing for recursion. For example, creating a group - with the name R1 by adding (? ) to the above pattern completely + However, in both cases, if there is a subpattern with a matching name, + the condition tests for its being set, as described in the section + above, instead of testing for recursion. For example, creating a group + with the name R1 by adding (? ) to the above pattern completely changes its meaning. If a name preceded by ampersand follows the letter R, for example: @@ -7846,7 +7847,7 @@ CONDITIONAL SUBPATTERNS of that name (which must exist within the pattern). This condition does not check the entire recursion stack. It tests only - the current level. If the name used in a condition of this kind is a + the current level. If the name used in a condition of this kind is a duplicate, the test is applied to all subpatterns of the same name, and is true if any one of them is the most recent recursion. @@ -7855,10 +7856,10 @@ CONDITIONAL SUBPATTERNS Defining subpatterns for use by reference only If the condition is the string (DEFINE), the condition is always false, - even if there is a group with the name DEFINE. In this case, there may + even if there is a group with the name DEFINE. In this case, there may be only one alternative in the subpattern. It is always skipped if con- - trol reaches this point in the pattern; the idea of DEFINE is that it - can be used to define subroutines that can be referenced from else- + trol reaches this point in the pattern; the idea of DEFINE is that it + can be used to define subroutines that can be referenced from else- where. (The use of subroutines is described below.) For example, a pat- tern to match an IPv4 address such as "192.168.23.245" could be written like this (ignore white space and line breaks): @@ -7866,97 +7867,97 @@ CONDITIONAL SUBPATTERNS (?(DEFINE) (? 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) ) \b (?&byte) (\.(?&byte)){3} \b - The first part of the pattern is a DEFINE group inside which a another - group named "byte" is defined. This matches an individual component of - an IPv4 address (a number less than 256). When matching takes place, - this part of the pattern is skipped because DEFINE acts like a false - condition. The rest of the pattern uses references to the named group - to match the four dot-separated components of an IPv4 address, insist- + The first part of the pattern is a DEFINE group inside which a another + group named "byte" is defined. This matches an individual component of + an IPv4 address (a number less than 256). When matching takes place, + this part of the pattern is skipped because DEFINE acts like a false + condition. The rest of the pattern uses references to the named group + to match the four dot-separated components of an IPv4 address, insist- ing on a word boundary at each end. Checking the PCRE2 version - Programs that link with a PCRE2 library can check the version by call- - ing pcre2_config() with appropriate arguments. Users of applications - that do not have access to the underlying code cannot do this. A spe- - cial "condition" called VERSION exists to allow such users to discover + Programs that link with a PCRE2 library can check the version by call- + ing pcre2_config() with appropriate arguments. Users of applications + that do not have access to the underlying code cannot do this. A spe- + cial "condition" called VERSION exists to allow such users to discover which version of PCRE2 they are dealing with by using this condition to - match a string such as "yesno". VERSION must be followed either by "=" + match a string such as "yesno". VERSION must be followed either by "=" or ">=" and a version number. For example: (?(VERSION>=10.4)yes|no) - This pattern matches "yes" if the PCRE2 version is greater or equal to - 10.4, or "no" otherwise. The fractional part of the version number may + This pattern matches "yes" if the PCRE2 version is greater or equal to + 10.4, or "no" otherwise. The fractional part of the version number may not contain more than two digits. Assertion conditions - If the condition is not in any of the above formats, it must be an - assertion. This may be a positive or negative lookahead or lookbehind - assertion. Consider this pattern, again containing non-significant + If the condition is not in any of the above formats, it must be an + assertion. This may be a positive or negative lookahead or lookbehind + assertion. Consider this pattern, again containing non-significant white space, and with the two alternatives on the second line: (?(?=[^a-z]*[a-z]) \d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} ) - The condition is a positive lookahead assertion that matches an - optional sequence of non-letters followed by a letter. In other words, - it tests for the presence of at least one letter in the subject. If a - letter is found, the subject is matched against the first alternative; - otherwise it is matched against the second. This pattern matches - strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are + The condition is a positive lookahead assertion that matches an + optional sequence of non-letters followed by a letter. In other words, + it tests for the presence of at least one letter in the subject. If a + letter is found, the subject is matched against the first alternative; + otherwise it is matched against the second. This pattern matches + strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits. - When an assertion that is a condition contains capturing subpatterns, - any capturing that occurs in a matching branch is retained afterwards, + When an assertion that is a condition contains capturing subpatterns, + any capturing that occurs in a matching branch is retained afterwards, for both positive and negative assertions, because matching always con- tinues after the assertion, whether it succeeds or fails. (Compare non- - conditional assertions, when captures are retained only for positive + conditional assertions, when captures are retained only for positive assertions that succeed.) COMMENTS There are two ways of including comments in patterns that are processed - by PCRE2. In both cases, the start of the comment must not be in a - character class, nor in the middle of any other sequence of related - characters such as (?: or a subpattern name or number. The characters + by PCRE2. In both cases, the start of the comment must not be in a + character class, nor in the middle of any other sequence of related + characters such as (?: or a subpattern name or number. The characters that make up a comment play no part in the pattern matching. - The sequence (?# marks the start of a comment that continues up to the - next closing parenthesis. Nested parentheses are not permitted. If the - PCRE2_EXTENDED option is set, an unescaped # character also introduces - a comment, which in this case continues to immediately after the next - newline character or character sequence in the pattern. Which charac- - ters are interpreted as newlines is controlled by an option passed to - the compiling function or by a special sequence at the start of the - pattern, as described in the section entitled "Newline conventions" - above. Note that the end of this type of comment is a literal newline - sequence in the pattern; escape sequences that happen to represent a - newline do not count. For example, consider this pattern when - PCRE2_EXTENDED is set, and the default newline convention (a single + The sequence (?# marks the start of a comment that continues up to the + next closing parenthesis. Nested parentheses are not permitted. If the + PCRE2_EXTENDED option is set, an unescaped # character also introduces + a comment, which in this case continues to immediately after the next + newline character or character sequence in the pattern. Which charac- + ters are interpreted as newlines is controlled by an option passed to + the compiling function or by a special sequence at the start of the + pattern, as described in the section entitled "Newline conventions" + above. Note that the end of this type of comment is a literal newline + sequence in the pattern; escape sequences that happen to represent a + newline do not count. For example, consider this pattern when + PCRE2_EXTENDED is set, and the default newline convention (a single linefeed character) is in force: abc #comment \n still comment - On encountering the # character, pcre2_compile() skips along, looking - for a newline in the pattern. The sequence \n is still literal at this - stage, so it does not terminate the comment. Only an actual character + On encountering the # character, pcre2_compile() skips along, looking + for a newline in the pattern. The sequence \n is still literal at this + stage, so it does not terminate the comment. Only an actual character with the code value 0x0a (the default newline) does so. RECURSIVE PATTERNS - Consider the problem of matching a string in parentheses, allowing for - unlimited nested parentheses. Without the use of recursion, the best - that can be done is to use a pattern that matches up to some fixed - depth of nesting. It is not possible to handle an arbitrary nesting + Consider the problem of matching a string in parentheses, allowing for + unlimited nested parentheses. Without the use of recursion, the best + that can be done is to use a pattern that matches up to some fixed + depth of nesting. It is not possible to handle an arbitrary nesting depth. For some time, Perl has provided a facility that allows regular expres- - sions to recurse (amongst other things). It does this by interpolating - Perl code in the expression at run time, and the code can refer to the + sions to recurse (amongst other things). It does this by interpolating + Perl code in the expression at run time, and the code can refer to the expression itself. A Perl pattern using code interpolation to solve the parentheses problem can be created like this: @@ -7966,179 +7967,179 @@ RECURSIVE PATTERNS refers recursively to the pattern in which it appears. Obviously, PCRE2 cannot support the interpolation of Perl code. - Instead, it supports special syntax for recursion of the entire pat- + Instead, it supports special syntax for recursion of the entire pat- tern, and also for individual subpattern recursion. After its introduc- - tion in PCRE1 and Python, this kind of recursion was subsequently + tion in PCRE1 and Python, this kind of recursion was subsequently introduced into Perl at release 5.10. - A special item that consists of (? followed by a number greater than - zero and a closing parenthesis is a recursive subroutine call of the - subpattern of the given number, provided that it occurs inside that - subpattern. (If not, it is a non-recursive subroutine call, which is - described in the next section.) The special item (?R) or (?0) is a + A special item that consists of (? followed by a number greater than + zero and a closing parenthesis is a recursive subroutine call of the + subpattern of the given number, provided that it occurs inside that + subpattern. (If not, it is a non-recursive subroutine call, which is + described in the next section.) The special item (?R) or (?0) is a recursive call of the entire regular expression. - This PCRE2 pattern solves the nested parentheses problem (assume the + This PCRE2 pattern solves the nested parentheses problem (assume the PCRE2_EXTENDED option is set so that white space is ignored): \( ( [^()]++ | (?R) )* \) - First it matches an opening parenthesis. Then it matches any number of - substrings which can either be a sequence of non-parentheses, or a - recursive match of the pattern itself (that is, a correctly parenthe- + First it matches an opening parenthesis. Then it matches any number of + substrings which can either be a sequence of non-parentheses, or a + recursive match of the pattern itself (that is, a correctly parenthe- sized substring). Finally there is a closing parenthesis. Note the use of a possessive quantifier to avoid backtracking into sequences of non- parentheses. - If this were part of a larger pattern, you would not want to recurse + If this were part of a larger pattern, you would not want to recurse the entire pattern, so instead you could use this: ( \( ( [^()]++ | (?1) )* \) ) - We have put the pattern into parentheses, and caused the recursion to + We have put the pattern into parentheses, and caused the recursion to refer to them instead of the whole pattern. - In a larger pattern, keeping track of parenthesis numbers can be - tricky. This is made easier by the use of relative references. Instead + In a larger pattern, keeping track of parenthesis numbers can be + tricky. This is made easier by the use of relative references. Instead of (?1) in the pattern above you can write (?-2) to refer to the second - most recently opened parentheses preceding the recursion. In other - words, a negative number counts capturing parentheses leftwards from + most recently opened parentheses preceding the recursion. In other + words, a negative number counts capturing parentheses leftwards from the point at which it is encountered. Be aware however, that if duplicate subpattern numbers are in use, rel- - ative references refer to the earliest subpattern with the appropriate + ative references refer to the earliest subpattern with the appropriate number. Consider, for example: (?|(a)|(b)) (c) (?-2) - The first two capturing groups (a) and (b) are both numbered 1, and - group (c) is number 2. When the reference (?-2) is encountered, the + The first two capturing groups (a) and (b) are both numbered 1, and + group (c) is number 2. When the reference (?-2) is encountered, the second most recently opened parentheses has the number 1, but it is the - first such group (the (a) group) to which the recursion refers. This - would be the same if an absolute reference (?1) was used. In other - words, relative references are just a shorthand for computing a group + first such group (the (a) group) to which the recursion refers. This + would be the same if an absolute reference (?1) was used. In other + words, relative references are just a shorthand for computing a group number. - It is also possible to refer to subsequently opened parentheses, by - writing references such as (?+2). However, these cannot be recursive - because the reference is not inside the parentheses that are refer- - enced. They are always non-recursive subroutine calls, as described in + It is also possible to refer to subsequently opened parentheses, by + writing references such as (?+2). However, these cannot be recursive + because the reference is not inside the parentheses that are refer- + enced. They are always non-recursive subroutine calls, as described in the next section. - An alternative approach is to use named parentheses. The Perl syntax - for this is (?&name); PCRE1's earlier syntax (?P>name) is also sup- + An alternative approach is to use named parentheses. The Perl syntax + for this is (?&name); PCRE1's earlier syntax (?P>name) is also sup- ported. We could rewrite the above example as follows: (? \( ( [^()]++ | (?&pn) )* \) ) - If there is more than one subpattern with the same name, the earliest + If there is more than one subpattern with the same name, the earliest one is used. The example pattern that we have been looking at contains nested unlim- - ited repeats, and so the use of a possessive quantifier for matching - strings of non-parentheses is important when applying the pattern to + ited repeats, and so the use of a possessive quantifier for matching + strings of non-parentheses is important when applying the pattern to strings that do not match. For example, when this pattern is applied to (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() - it yields "no match" quickly. However, if a possessive quantifier is - not used, the match runs for a very long time indeed because there are - so many different ways the + and * repeats can carve up the subject, + it yields "no match" quickly. However, if a possessive quantifier is + not used, the match runs for a very long time indeed because there are + so many different ways the + and * repeats can carve up the subject, and all have to be tested before failure can be reported. - At the end of a match, the values of capturing parentheses are those - from the outermost level. If you want to obtain intermediate values, a + At the end of a match, the values of capturing parentheses are those + from the outermost level. If you want to obtain intermediate values, a callout function can be used (see below and the pcre2callout documenta- tion). If the pattern above is matched against (ab(cd)ef) - the value for the inner capturing parentheses (numbered 2) is "ef", - which is the last value taken on at the top level. If a capturing sub- - pattern is not matched at the top level, its final captured value is - unset, even if it was (temporarily) set at a deeper level during the + the value for the inner capturing parentheses (numbered 2) is "ef", + which is the last value taken on at the top level. If a capturing sub- + pattern is not matched at the top level, its final captured value is + unset, even if it was (temporarily) set at a deeper level during the matching process. If there are more than 15 capturing parentheses in a pattern, PCRE2 has - to obtain extra memory from the heap to store data during a recursion. - If no memory can be obtained, the match fails with the + to obtain extra memory from the heap to store data during a recursion. + If no memory can be obtained, the match fails with the PCRE2_ERROR_NOMEMORY error. - Do not confuse the (?R) item with the condition (R), which tests for - recursion. Consider this pattern, which matches text in angle brack- - ets, allowing for arbitrary nesting. Only digits are allowed in nested - brackets (that is, when recursing), whereas any characters are permit- + Do not confuse the (?R) item with the condition (R), which tests for + recursion. Consider this pattern, which matches text in angle brack- + ets, allowing for arbitrary nesting. Only digits are allowed in nested + brackets (that is, when recursing), whereas any characters are permit- ted at the outer level. < (?: (?(R) \d++ | [^<>]*+) | (?R)) * > - In this pattern, (?(R) is the start of a conditional subpattern, with - two different alternatives for the recursive and non-recursive cases. + In this pattern, (?(R) is the start of a conditional subpattern, with + two different alternatives for the recursive and non-recursive cases. The (?R) item is the actual recursive call. Differences in recursion processing between PCRE2 and Perl Some former differences between PCRE2 and Perl no longer exist. - Before release 10.30, recursion processing in PCRE2 differed from Perl - in that a recursive subpattern call was always treated as an atomic - group. That is, once it had matched some of the subject string, it was - never re-entered, even if it contained untried alternatives and there - was a subsequent matching failure. (Historical note: PCRE implemented + Before release 10.30, recursion processing in PCRE2 differed from Perl + in that a recursive subpattern call was always treated as an atomic + group. That is, once it had matched some of the subject string, it was + never re-entered, even if it contained untried alternatives and there + was a subsequent matching failure. (Historical note: PCRE implemented recursion before Perl did.) - Starting with release 10.30, recursive subroutine calls are no longer + Starting with release 10.30, recursive subroutine calls are no longer treated as atomic. That is, they can be re-entered to try unused alter- - natives if there is a matching failure later in the pattern. This is - now compatible with the way Perl works. If you want a subroutine call + natives if there is a matching failure later in the pattern. This is + now compatible with the way Perl works. If you want a subroutine call to be atomic, you must explicitly enclose it in an atomic group. - Supporting backtracking into recursions simplifies certain types of + Supporting backtracking into recursions simplifies certain types of recursive pattern. For example, this pattern matches palindromic strings: ^((.)(?1)\2|.?)$ - The second branch in the group matches a single central character in - the palindrome when there are an odd number of characters, or nothing - when there are an even number of characters, but in order to work it - has to be able to try the second case when the rest of the pattern + The second branch in the group matches a single central character in + the palindrome when there are an odd number of characters, or nothing + when there are an even number of characters, but in order to work it + has to be able to try the second case when the rest of the pattern match fails. If you want to match typical palindromic phrases, the pat- - tern has to ignore all non-word characters, which can be done like + tern has to ignore all non-word characters, which can be done like this: ^\W*+((.)\W*+(?1)\W*+\2|\W*+.?)\W*+$ - If run with the PCRE2_CASELESS option, this pattern matches phrases - such as "A man, a plan, a canal: Panama!". Note the use of the posses- - sive quantifier *+ to avoid backtracking into sequences of non-word + If run with the PCRE2_CASELESS option, this pattern matches phrases + such as "A man, a plan, a canal: Panama!". Note the use of the posses- + sive quantifier *+ to avoid backtracking into sequences of non-word characters. Without this, PCRE2 takes a great deal longer (ten times or - more) to match typical phrases, and Perl takes so long that you think + more) to match typical phrases, and Perl takes so long that you think it has gone into a loop. - Another way in which PCRE2 and Perl used to differ in their recursion - processing is in the handling of captured values. Formerly in Perl, - when a subpattern was called recursively or as a subpattern (see the - next section), it had no access to any values that were captured out- - side the recursion, whereas in PCRE2 these values can be referenced. + Another way in which PCRE2 and Perl used to differ in their recursion + processing is in the handling of captured values. Formerly in Perl, + when a subpattern was called recursively or as a subpattern (see the + next section), it had no access to any values that were captured out- + side the recursion, whereas in PCRE2 these values can be referenced. Consider this pattern: ^(.)(\1|a(?2)) - This pattern matches "bab". The first capturing parentheses match "b", - then in the second group, when the back reference \1 fails to match - "b", the second alternative matches "a" and then recurses. In the - recursion, \1 does now match "b" and so the whole match succeeds. This - match used to fail in Perl, but in later versions (I tried 5.024) it + This pattern matches "bab". The first capturing parentheses match "b", + then in the second group, when the back reference \1 fails to match + "b", the second alternative matches "a" and then recurses. In the + recursion, \1 does now match "b" and so the whole match succeeds. This + match used to fail in Perl, but in later versions (I tried 5.024) it now works. SUBPATTERNS AS SUBROUTINES - If the syntax for a recursive subpattern call (either by number or by - name) is used outside the parentheses to which it refers, it operates - like a subroutine in a programming language. The called subpattern may - be defined before or after the reference. A numbered reference can be + If the syntax for a recursive subpattern call (either by number or by + name) is used outside the parentheses to which it refers, it operates + like a subroutine in a programming language. The called subpattern may + be defined before or after the reference. A numbered reference can be absolute or relative, as in these examples: (...(absolute)...)...(?2)... @@ -8149,102 +8150,102 @@ SUBPATTERNS AS SUBROUTINES (sens|respons)e and \1ibility - matches "sense and sensibility" and "response and responsibility", but + matches "sense and sensibility" and "response and responsibility", but not "sense and responsibility". If instead the pattern (sens|respons)e and (?1)ibility - is used, it does match "sense and responsibility" as well as the other - two strings. Another example is given in the discussion of DEFINE + is used, it does match "sense and responsibility" as well as the other + two strings. Another example is given in the discussion of DEFINE above. - Like recursions, subroutine calls used to be treated as atomic, but - this changed at PCRE2 release 10.30, so backtracking into subroutine - calls can now occur. However, any capturing parentheses that are set + Like recursions, subroutine calls used to be treated as atomic, but + this changed at PCRE2 release 10.30, so backtracking into subroutine + calls can now occur. However, any capturing parentheses that are set during the subroutine call revert to their previous values afterwards. - Processing options such as case-independence are fixed when a subpat- - tern is defined, so if it is used as a subroutine, such options cannot + Processing options such as case-independence are fixed when a subpat- + tern is defined, so if it is used as a subroutine, such options cannot be changed for different calls. For example, consider this pattern: (abc)(?i:(?-1)) - It matches "abcabc". It does not match "abcABC" because the change of + It matches "abcabc". It does not match "abcABC" because the change of processing option does not affect the called subpattern. ONIGURUMA SUBROUTINE SYNTAX - For compatibility with Oniguruma, the non-Perl syntax \g followed by a + For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or a number enclosed either in angle brackets or single quotes, is - an alternative syntax for referencing a subpattern as a subroutine, - possibly recursively. Here are two of the examples used above, rewrit- + an alternative syntax for referencing a subpattern as a subroutine, + possibly recursively. Here are two of the examples used above, rewrit- ten using this syntax: (? \( ( (?>[^()]+) | \g )* \) ) (sens|respons)e and \g'1'ibility - PCRE2 supports an extension to Oniguruma: if a number is preceded by a + PCRE2 supports an extension to Oniguruma: if a number is preceded by a plus or a minus sign it is taken as a relative reference. For example: (abc)(?i:\g<-1>) - Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are not - synonymous. The former is a back reference; the latter is a subroutine + Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are not + synonymous. The former is a back reference; the latter is a subroutine call. CALLOUTS Perl has a feature whereby using the sequence (?{...}) causes arbitrary - Perl code to be obeyed in the middle of matching a regular expression. + Perl code to be obeyed in the middle of matching a regular expression. This makes it possible, amongst other things, to extract different sub- strings that match the same pair of parentheses when there is a repeti- tion. - PCRE2 provides a similar feature, but of course it cannot obey arbi- - trary Perl code. The feature is called "callout". The caller of PCRE2 - provides an external function by putting its entry point in a match - context using the function pcre2_set_callout(), and then passing that - context to pcre2_match() or pcre2_dfa_match(). If no match context is + PCRE2 provides a similar feature, but of course it cannot obey arbi- + trary Perl code. The feature is called "callout". The caller of PCRE2 + provides an external function by putting its entry point in a match + context using the function pcre2_set_callout(), and then passing that + context to pcre2_match() or pcre2_dfa_match(). If no match context is passed, or if the callout entry point is set to NULL, callouts are dis- abled. - Within a regular expression, (?C ) indicates a point at which the - external function is to be called. There are two kinds of callout: - those with a numerical argument and those with a string argument. (?C) - on its own with no argument is treated as (?C0). A numerical argument - allows the application to distinguish between different callouts. - String arguments were added for release 10.20 to make it possible for - script languages that use PCRE2 to embed short scripts within patterns + Within a regular expression, (?C ) indicates a point at which the + external function is to be called. There are two kinds of callout: + those with a numerical argument and those with a string argument. (?C) + on its own with no argument is treated as (?C0). A numerical argument + allows the application to distinguish between different callouts. + String arguments were added for release 10.20 to make it possible for + script languages that use PCRE2 to embed short scripts within patterns in a similar way to Perl. During matching, when PCRE2 reaches a callout point, the external func- - tion is called. It is provided with the number or string argument of - the callout, the position in the pattern, and one item of data that is + tion is called. It is provided with the number or string argument of + the callout, the position in the pattern, and one item of data that is also set in the match block. The callout function may cause matching to proceed, to backtrack, or to fail. - By default, PCRE2 implements a number of optimizations at matching - time, and one side-effect is that sometimes callouts are skipped. If - you need all possible callouts to happen, you need to set options that - disable the relevant optimizations. More details, including a complete - description of the programming interface to the callout function, are + By default, PCRE2 implements a number of optimizations at matching + time, and one side-effect is that sometimes callouts are skipped. If + you need all possible callouts to happen, you need to set options that + disable the relevant optimizations. More details, including a complete + description of the programming interface to the callout function, are given in the pcre2callout documentation. Callouts with numerical arguments - If you just want to have a means of identifying different callout - points, put a number less than 256 after the letter C. For example, + If you just want to have a means of identifying different callout + points, put a number less than 256 after the letter C. For example, this pattern has two callout points: (?C1)abc(?C2)def - If the PCRE2_AUTO_CALLOUT flag is passed to pcre2_compile(), numerical - callouts are automatically installed before each item in the pattern. - They are all numbered 255. If there is a conditional group in the pat- + If the PCRE2_AUTO_CALLOUT flag is passed to pcre2_compile(), numerical + callouts are automatically installed before each item in the pattern. + They are all numbered 255. If there is a conditional group in the pat- tern whose condition is an assertion, an additional callout is inserted - just before the condition. An explicit callout may also be set at this + just before the condition. An explicit callout may also be set at this position, as in this example: (?(?C9)(?=a)abc|def) @@ -8254,60 +8255,60 @@ CALLOUTS Callouts with string arguments - A delimited string may be used instead of a number as a callout argu- - ment. The starting delimiter must be one of ` ' " ^ % # $ { and the + A delimited string may be used instead of a number as a callout argu- + ment. The starting delimiter must be one of ` ' " ^ % # $ { and the ending delimiter is the same as the start, except for {, where the end- - ing delimiter is }. If the ending delimiter is needed within the + ing delimiter is }. If the ending delimiter is needed within the string, it must be doubled. For example: (?C'ab ''c'' d')xyz(?C{any text})pqr - The doubling is removed before the string is passed to the callout + The doubling is removed before the string is passed to the callout function. BACKTRACKING CONTROL - There are a number of special "Backtracking Control Verbs" (to use - Perl's terminology) that modify the behaviour of backtracking during - matching. They are generally of the form (*VERB) or (*VERB:NAME). Some - verbs take either form, possibly behaving differently depending on + There are a number of special "Backtracking Control Verbs" (to use + Perl's terminology) that modify the behaviour of backtracking during + matching. They are generally of the form (*VERB) or (*VERB:NAME). Some + verbs take either form, possibly behaving differently depending on whether or not a name is present. - By default, for compatibility with Perl, a name is any sequence of + By default, for compatibility with Perl, a name is any sequence of characters that does not include a closing parenthesis. The name is not - processed in any way, and it is not possible to include a closing - parenthesis in the name. This can be changed by setting the - PCRE2_ALT_VERBNAMES option, but the result is no longer Perl-compati- + processed in any way, and it is not possible to include a closing + parenthesis in the name. This can be changed by setting the + PCRE2_ALT_VERBNAMES option, but the result is no longer Perl-compati- ble. - When PCRE2_ALT_VERBNAMES is set, backslash processing is applied to - verb names and only an unescaped closing parenthesis terminates the - name. However, the only backslash items that are permitted are \Q, \E, - and sequences such as \x{100} that define character code points. Char- + When PCRE2_ALT_VERBNAMES is set, backslash processing is applied to + verb names and only an unescaped closing parenthesis terminates the + name. However, the only backslash items that are permitted are \Q, \E, + and sequences such as \x{100} that define character code points. Char- acter type escapes such as \d are faulted. A closing parenthesis can be included in a name either as \) or between - \Q and \E. In addition to backslash processing, if the PCRE2_EXTENDED - option is also set, unescaped whitespace in verb names is skipped, and - #-comments are recognized, exactly as in the rest of the pattern. + \Q and \E. In addition to backslash processing, if the PCRE2_EXTENDED + option is also set, unescaped whitespace in verb names is skipped, and + #-comments are recognized, exactly as in the rest of the pattern. PCRE2_EXTENDED does not affect verb names unless PCRE2_ALT_VERBNAMES is also set. - The maximum length of a name is 255 in the 8-bit library and 65535 in - the 16-bit and 32-bit libraries. If the name is empty, that is, if the - closing parenthesis immediately follows the colon, the effect is as if + The maximum length of a name is 255 in the 8-bit library and 65535 in + the 16-bit and 32-bit libraries. If the name is empty, that is, if the + closing parenthesis immediately follows the colon, the effect is as if the colon were not there. Any number of these verbs may occur in a pat- tern. - Since these verbs are specifically related to backtracking, most of - them can be used only when the pattern is to be matched using the tra- + Since these verbs are specifically related to backtracking, most of + them can be used only when the pattern is to be matched using the tra- ditional matching function, because that uses a backtracking algorithm. - With the exception of (*FAIL), which behaves like a failing negative + With the exception of (*FAIL), which behaves like a failing negative assertion, the backtracking control verbs cause an error if encountered by the DFA matching function. - The behaviour of these verbs in repeated groups, assertions, and in + The behaviour of these verbs in repeated groups, assertions, and in subpatterns called as subroutines (whether or not recursively) is docu- mented below. @@ -8315,71 +8316,71 @@ BACKTRACKING CONTROL PCRE2 contains some optimizations that are used to speed up matching by running some checks at the start of each match attempt. For example, it - may know the minimum length of matching subject, or that a particular + may know the minimum length of matching subject, or that a particular character must be present. When one of these optimizations bypasses the - running of a match, any included backtracking verbs will not, of + running of a match, any included backtracking verbs will not, of course, be processed. You can suppress the start-of-match optimizations - by setting the PCRE2_NO_START_OPTIMIZE option when calling pcre2_com- - pile(), or by starting the pattern with (*NO_START_OPT). There is more + by setting the PCRE2_NO_START_OPTIMIZE option when calling pcre2_com- + pile(), or by starting the pattern with (*NO_START_OPT). There is more discussion of this option in the section entitled "Compiling a pattern" in the pcre2api documentation. - Experiments with Perl suggest that it too has similar optimizations, + Experiments with Perl suggest that it too has similar optimizations, sometimes leading to anomalous results. Verbs that act immediately - The following verbs act as soon as they are encountered. They may not + The following verbs act as soon as they are encountered. They may not be followed by a name. (*ACCEPT) - This verb causes the match to end successfully, skipping the remainder - of the pattern. However, when it is inside a subpattern that is called - as a subroutine, only that subpattern is ended successfully. Matching + This verb causes the match to end successfully, skipping the remainder + of the pattern. However, when it is inside a subpattern that is called + as a subroutine, only that subpattern is ended successfully. Matching then continues at the outer level. If (*ACCEPT) in triggered in a posi- - tive assertion, the assertion succeeds; in a negative assertion, the + tive assertion, the assertion succeeds; in a negative assertion, the assertion fails. - If (*ACCEPT) is inside capturing parentheses, the data so far is cap- + If (*ACCEPT) is inside capturing parentheses, the data so far is cap- tured. For example: A((?:A|B(*ACCEPT)|C)D) - This matches "AB", "AAD", or "ACD"; when it matches "AB", "B" is cap- + This matches "AB", "AAD", or "ACD"; when it matches "AB", "B" is cap- tured by the outer parentheses. (*FAIL) or (*F) - This verb causes a matching failure, forcing backtracking to occur. It - is equivalent to (?!) but easier to read. The Perl documentation notes - that it is probably useful only when combined with (?{}) or (??{}). - Those are, of course, Perl features that are not present in PCRE2. The - nearest equivalent is the callout feature, as for example in this pat- + This verb causes a matching failure, forcing backtracking to occur. It + is equivalent to (?!) but easier to read. The Perl documentation notes + that it is probably useful only when combined with (?{}) or (??{}). + Those are, of course, Perl features that are not present in PCRE2. The + nearest equivalent is the callout feature, as for example in this pat- tern: a+(?C)(*FAIL) - A match with the string "aaaa" always fails, but the callout is taken + A match with the string "aaaa" always fails, but the callout is taken before each backtrack happens (in this example, 10 times). Recording which path was taken - There is one verb whose main purpose is to track how a match was - arrived at, though it also has a secondary use in conjunction with + There is one verb whose main purpose is to track how a match was + arrived at, though it also has a secondary use in conjunction with advancing the match starting point (see (*SKIP) below). (*MARK:NAME) or (*:NAME) - A name is always required with this verb. There may be as many - instances of (*MARK) as you like in a pattern, and their names do not + A name is always required with this verb. There may be as many + instances of (*MARK) as you like in a pattern, and their names do not have to be unique. - When a match succeeds, the name of the last-encountered (*MARK:NAME), - (*PRUNE:NAME), or (*THEN:NAME) on the matching path is passed back to - the caller as described in the section entitled "Other information - about the match" in the pcre2api documentation. Here is an example of - pcre2test output, where the "mark" modifier requests the retrieval and + When a match succeeds, the name of the last-encountered (*MARK:NAME), + (*PRUNE:NAME), or (*THEN:NAME) on the matching path is passed back to + the caller as described in the section entitled "Other information + about the match" in the pcre2api documentation. Here is an example of + pcre2test output, where the "mark" modifier requests the retrieval and outputting of (*MARK) data: re> /X(*MARK:A)Y|X(*MARK:B)Z/mark @@ -8391,72 +8392,72 @@ BACKTRACKING CONTROL MK: B The (*MARK) name is tagged with "MK:" in this output, and in this exam- - ple it indicates which of the two alternatives matched. This is a more - efficient way of obtaining this information than putting each alterna- + ple it indicates which of the two alternatives matched. This is a more + efficient way of obtaining this information than putting each alterna- tive in its own capturing parentheses. - If a verb with a name is encountered in a positive assertion that is - true, the name is recorded and passed back if it is the last-encoun- + If a verb with a name is encountered in a positive assertion that is + true, the name is recorded and passed back if it is the last-encoun- tered. This does not happen for negative assertions or failing positive assertions. - After a partial match or a failed match, the last encountered name in + After a partial match or a failed match, the last encountered name in the entire match process is returned. For example: re> /X(*MARK:A)Y|X(*MARK:B)Z/mark data> XP No match, mark = B - Note that in this unanchored example the mark is retained from the + Note that in this unanchored example the mark is retained from the match attempt that started at the letter "X" in the subject. Subsequent match attempts starting at "P" and then with an empty string do not get as far as the (*MARK) item, but nevertheless do not reset it. - If you are interested in (*MARK) values after failed matches, you - should probably set the PCRE2_NO_START_OPTIMIZE option (see above) to + If you are interested in (*MARK) values after failed matches, you + should probably set the PCRE2_NO_START_OPTIMIZE option (see above) to ensure that the match is always attempted. Verbs that act after backtracking The following verbs do nothing when they are encountered. Matching con- - tinues with what follows, but if there is no subsequent match, causing - a backtrack to the verb, a failure is forced. That is, backtracking - cannot pass to the left of the verb. However, when one of these verbs - appears inside an atomic group or in an assertion that is true, its - effect is confined to that group, because once the group has been - matched, there is never any backtracking into it. In this situation, - backtracking has to jump to the left of the entire atomic group or + tinues with what follows, but if there is no subsequent match, causing + a backtrack to the verb, a failure is forced. That is, backtracking + cannot pass to the left of the verb. However, when one of these verbs + appears inside an atomic group or in an assertion that is true, its + effect is confined to that group, because once the group has been + matched, there is never any backtracking into it. In this situation, + backtracking has to jump to the left of the entire atomic group or assertion. - These verbs differ in exactly what kind of failure occurs when back- - tracking reaches them. The behaviour described below is what happens - when the verb is not in a subroutine or an assertion. Subsequent sec- + These verbs differ in exactly what kind of failure occurs when back- + tracking reaches them. The behaviour described below is what happens + when the verb is not in a subroutine or an assertion. Subsequent sec- tions cover these special cases. (*COMMIT) - This verb, which may not be followed by a name, causes the whole match + This verb, which may not be followed by a name, causes the whole match to fail outright if there is a later matching failure that causes back- - tracking to reach it. Even if the pattern is unanchored, no further + tracking to reach it. Even if the pattern is unanchored, no further attempts to find a match by advancing the starting point take place. If - (*COMMIT) is the only backtracking verb that is encountered, once it - has been passed pcre2_match() is committed to finding a match at the + (*COMMIT) is the only backtracking verb that is encountered, once it + has been passed pcre2_match() is committed to finding a match at the current starting point, or not at all. For example: a+(*COMMIT)b - This matches "xxaab" but not "aacaab". It can be thought of as a kind + This matches "xxaab" but not "aacaab". It can be thought of as a kind of dynamic anchor, or "I've started, so I must finish." The name of the - most recently passed (*MARK) in the path is passed back when (*COMMIT) + most recently passed (*MARK) in the path is passed back when (*COMMIT) forces a match failure. - If there is more than one backtracking verb in a pattern, a different - one that follows (*COMMIT) may be triggered first, so merely passing + If there is more than one backtracking verb in a pattern, a different + one that follows (*COMMIT) may be triggered first, so merely passing (*COMMIT) during a match does not always guarantee that a match must be at this starting point. - Note that (*COMMIT) at the start of a pattern is not the same as an - anchor, unless PCRE2's start-of-match optimizations are turned off, as + Note that (*COMMIT) at the start of a pattern is not the same as an + anchor, unless PCRE2's start-of-match optimizations are turned off, as shown in this output from pcre2test: re> /(*COMMIT)abc/ @@ -8467,213 +8468,213 @@ BACKTRACKING CONTROL data> xyzabc No match - For the first pattern, PCRE2 knows that any match must start with "a", - so the optimization skips along the subject to "a" before applying the - pattern to the first set of data. The match attempt then succeeds. The - second pattern disables the optimization that skips along to the first - character. The pattern is now applied starting at "x", and so the - (*COMMIT) causes the match to fail without trying any other starting + For the first pattern, PCRE2 knows that any match must start with "a", + so the optimization skips along the subject to "a" before applying the + pattern to the first set of data. The match attempt then succeeds. The + second pattern disables the optimization that skips along to the first + character. The pattern is now applied starting at "x", and so the + (*COMMIT) causes the match to fail without trying any other starting points. (*PRUNE) or (*PRUNE:NAME) - This verb causes the match to fail at the current starting position in + This verb causes the match to fail at the current starting position in the subject if there is a later matching failure that causes backtrack- - ing to reach it. If the pattern is unanchored, the normal "bumpalong" - advance to the next starting character then happens. Backtracking can - occur as usual to the left of (*PRUNE), before it is reached, or when - matching to the right of (*PRUNE), but if there is no match to the - right, backtracking cannot cross (*PRUNE). In simple cases, the use of - (*PRUNE) is just an alternative to an atomic group or possessive quan- + ing to reach it. If the pattern is unanchored, the normal "bumpalong" + advance to the next starting character then happens. Backtracking can + occur as usual to the left of (*PRUNE), before it is reached, or when + matching to the right of (*PRUNE), but if there is no match to the + right, backtracking cannot cross (*PRUNE). In simple cases, the use of + (*PRUNE) is just an alternative to an atomic group or possessive quan- tifier, but there are some uses of (*PRUNE) that cannot be expressed in - any other way. In an anchored pattern (*PRUNE) has the same effect as + any other way. In an anchored pattern (*PRUNE) has the same effect as (*COMMIT). The behaviour of (*PRUNE:NAME) is not the same as (*MARK:NAME)(*PRUNE). It is like (*MARK:NAME) in that the name is remembered for passing back - to the caller. However, (*SKIP:NAME) searches only for names set with + to the caller. However, (*SKIP:NAME) searches only for names set with (*MARK), ignoring those set by (*PRUNE) or (*THEN). (*SKIP) - This verb, when given without a name, is like (*PRUNE), except that if - the pattern is unanchored, the "bumpalong" advance is not to the next + This verb, when given without a name, is like (*PRUNE), except that if + the pattern is unanchored, the "bumpalong" advance is not to the next character, but to the position in the subject where (*SKIP) was encoun- - tered. (*SKIP) signifies that whatever text was matched leading up to + tered. (*SKIP) signifies that whatever text was matched leading up to it cannot be part of a successful match. Consider: a+(*SKIP)b - If the subject is "aaaac...", after the first match attempt fails - (starting at the first character in the string), the starting point + If the subject is "aaaac...", after the first match attempt fails + (starting at the first character in the string), the starting point skips on to start the next attempt at "c". Note that a possessive quan- - tifer does not have the same effect as this example; although it would - suppress backtracking during the first match attempt, the second - attempt would start at the second character instead of skipping on to + tifer does not have the same effect as this example; although it would + suppress backtracking during the first match attempt, the second + attempt would start at the second character instead of skipping on to "c". (*SKIP:NAME) When (*SKIP) has an associated name, its behaviour is modified. When it is triggered, the previous path through the pattern is searched for the - most recent (*MARK) that has the same name. If one is found, the + most recent (*MARK) that has the same name. If one is found, the "bumpalong" advance is to the subject position that corresponds to that (*MARK) instead of to where (*SKIP) was encountered. If no (*MARK) with a matching name is found, the (*SKIP) is ignored. - Note that (*SKIP:NAME) searches only for names set by (*MARK:NAME). It + Note that (*SKIP:NAME) searches only for names set by (*MARK:NAME). It ignores names that are set by (*PRUNE:NAME) or (*THEN:NAME). (*THEN) or (*THEN:NAME) - This verb causes a skip to the next innermost alternative when back- - tracking reaches it. That is, it cancels any further backtracking - within the current alternative. Its name comes from the observation + This verb causes a skip to the next innermost alternative when back- + tracking reaches it. That is, it cancels any further backtracking + within the current alternative. Its name comes from the observation that it can be used for a pattern-based if-then-else block: ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ... - If the COND1 pattern matches, FOO is tried (and possibly further items - after the end of the group if FOO succeeds); on failure, the matcher - skips to the second alternative and tries COND2, without backtracking - into COND1. If that succeeds and BAR fails, COND3 is tried. If subse- - quently BAZ fails, there are no more alternatives, so there is a back- - track to whatever came before the entire group. If (*THEN) is not + If the COND1 pattern matches, FOO is tried (and possibly further items + after the end of the group if FOO succeeds); on failure, the matcher + skips to the second alternative and tries COND2, without backtracking + into COND1. If that succeeds and BAR fails, COND3 is tried. If subse- + quently BAZ fails, there are no more alternatives, so there is a back- + track to whatever came before the entire group. If (*THEN) is not inside an alternation, it acts like (*PRUNE). - The behaviour of (*THEN:NAME) is the not the same as - (*MARK:NAME)(*THEN). It is like (*MARK:NAME) in that the name is - remembered for passing back to the caller. However, (*SKIP:NAME) - searches only for names set with (*MARK), ignoring those set by + The behaviour of (*THEN:NAME) is the not the same as + (*MARK:NAME)(*THEN). It is like (*MARK:NAME) in that the name is + remembered for passing back to the caller. However, (*SKIP:NAME) + searches only for names set with (*MARK), ignoring those set by (*PRUNE) and (*THEN). - A subpattern that does not contain a | character is just a part of the - enclosing alternative; it is not a nested alternation with only one - alternative. The effect of (*THEN) extends beyond such a subpattern to - the enclosing alternative. Consider this pattern, where A, B, etc. are - complex pattern fragments that do not contain any | characters at this + A subpattern that does not contain a | character is just a part of the + enclosing alternative; it is not a nested alternation with only one + alternative. The effect of (*THEN) extends beyond such a subpattern to + the enclosing alternative. Consider this pattern, where A, B, etc. are + complex pattern fragments that do not contain any | characters at this level: A (B(*THEN)C) | D - If A and B are matched, but there is a failure in C, matching does not + If A and B are matched, but there is a failure in C, matching does not backtrack into A; instead it moves to the next alternative, that is, D. - However, if the subpattern containing (*THEN) is given an alternative, + However, if the subpattern containing (*THEN) is given an alternative, it behaves differently: A (B(*THEN)C | (*FAIL)) | D - The effect of (*THEN) is now confined to the inner subpattern. After a + The effect of (*THEN) is now confined to the inner subpattern. After a failure in C, matching moves to (*FAIL), which causes the whole subpat- - tern to fail because there are no more alternatives to try. In this + tern to fail because there are no more alternatives to try. In this case, matching does now backtrack into A. - Note that a conditional subpattern is not considered as having two - alternatives, because only one is ever used. In other words, the | + Note that a conditional subpattern is not considered as having two + alternatives, because only one is ever used. In other words, the | character in a conditional subpattern has a different meaning. Ignoring white space, consider: ^.*? (?(?=a) a | b(*THEN)c ) - If the subject is "ba", this pattern does not match. Because .*? is - ungreedy, it initially matches zero characters. The condition (?=a) - then fails, the character "b" is matched, but "c" is not. At this - point, matching does not backtrack to .*? as might perhaps be expected - from the presence of the | character. The conditional subpattern is + If the subject is "ba", this pattern does not match. Because .*? is + ungreedy, it initially matches zero characters. The condition (?=a) + then fails, the character "b" is matched, but "c" is not. At this + point, matching does not backtrack to .*? as might perhaps be expected + from the presence of the | character. The conditional subpattern is part of the single alternative that comprises the whole pattern, and so - the match fails. (If there was a backtrack into .*?, allowing it to + the match fails. (If there was a backtrack into .*?, allowing it to match "b", the match would succeed.) - The verbs just described provide four different "strengths" of control + The verbs just described provide four different "strengths" of control when subsequent matching fails. (*THEN) is the weakest, carrying on the - match at the next alternative. (*PRUNE) comes next, failing the match - at the current starting position, but allowing an advance to the next - character (for an unanchored pattern). (*SKIP) is similar, except that + match at the next alternative. (*PRUNE) comes next, failing the match + at the current starting position, but allowing an advance to the next + character (for an unanchored pattern). (*SKIP) is similar, except that the advance may be more than one character. (*COMMIT) is the strongest, causing the entire match to fail. More than one backtracking verb - If more than one backtracking verb is present in a pattern, the one - that is backtracked onto first acts. For example, consider this pat- + If more than one backtracking verb is present in a pattern, the one + that is backtracked onto first acts. For example, consider this pat- tern, where A, B, etc. are complex pattern fragments: (A(*COMMIT)B(*THEN)C|ABD) - If A matches but B fails, the backtrack to (*COMMIT) causes the entire + If A matches but B fails, the backtrack to (*COMMIT) causes the entire match to fail. However, if A and B match, but C fails, the backtrack to - (*THEN) causes the next alternative (ABD) to be tried. This behaviour - is consistent, but is not always the same as Perl's. It means that if - two or more backtracking verbs appear in succession, all the the last + (*THEN) causes the next alternative (ABD) to be tried. This behaviour + is consistent, but is not always the same as Perl's. It means that if + two or more backtracking verbs appear in succession, all the the last of them has no effect. Consider this example: ...(*COMMIT)(*PRUNE)... If there is a matching failure to the right, backtracking onto (*PRUNE) - causes it to be triggered, and its action is taken. There can never be + causes it to be triggered, and its action is taken. There can never be a backtrack onto (*COMMIT). Backtracking verbs in repeated groups - PCRE2 differs from Perl in its handling of backtracking verbs in + PCRE2 differs from Perl in its handling of backtracking verbs in repeated groups. For example, consider: /(a(*COMMIT)b)+ac/ - If the subject is "abac", Perl matches, but PCRE2 fails because the + If the subject is "abac", Perl matches, but PCRE2 fails because the (*COMMIT) in the second repeat of the group acts. Backtracking verbs in assertions - (*FAIL) in any assertion has its normal effect: it forces an immediate - backtrack. The behaviour of the other backtracking verbs depends on - whether or not the assertion is standalone or acting as the condition + (*FAIL) in any assertion has its normal effect: it forces an immediate + backtrack. The behaviour of the other backtracking verbs depends on + whether or not the assertion is standalone or acting as the condition in a conditional subpattern. - (*ACCEPT) in a standalone positive assertion causes the assertion to - succeed without any further processing; captured strings are retained. - In a standalone negative assertion, (*ACCEPT) causes the assertion to + (*ACCEPT) in a standalone positive assertion causes the assertion to + succeed without any further processing; captured strings are retained. + In a standalone negative assertion, (*ACCEPT) causes the assertion to fail without any further processing; captured substrings are discarded. - If the assertion is a condition, (*ACCEPT) causes the condition to be - true for a positive assertion and false for a negative one; captured + If the assertion is a condition, (*ACCEPT) causes the condition to be + true for a positive assertion and false for a negative one; captured substrings are retained in both cases. - The effect of (*THEN) is not allowed to escape beyond an assertion. If - there are no more branches to try, (*THEN) causes a positive assertion + The effect of (*THEN) is not allowed to escape beyond an assertion. If + there are no more branches to try, (*THEN) causes a positive assertion to be false, and a negative assertion to be true. - The other backtracking verbs are not treated specially if they appear - in a standalone positive assertion. In a conditional positive asser- + The other backtracking verbs are not treated specially if they appear + in a standalone positive assertion. In a conditional positive asser- tion, backtracking into (*COMMIT), (*SKIP), or (*PRUNE) causes the con- - dition to be false. However, for both standalone and conditional nega- - tive assertions, backtracking into (*COMMIT), (*SKIP), or (*PRUNE) + dition to be false. However, for both standalone and conditional nega- + tive assertions, backtracking into (*COMMIT), (*SKIP), or (*PRUNE) causes the assertion to be true, without considering any further alter- native branches. Backtracking verbs in subroutines - These behaviours occur whether or not the subpattern is called recur- + These behaviours occur whether or not the subpattern is called recur- sively. Perl's treatment of subroutines is different in some cases. - (*FAIL) in a subpattern called as a subroutine has its normal effect: + (*FAIL) in a subpattern called as a subroutine has its normal effect: it forces an immediate backtrack. - (*ACCEPT) in a subpattern called as a subroutine causes the subroutine - match to succeed without any further processing. Matching then contin- + (*ACCEPT) in a subpattern called as a subroutine causes the subroutine + match to succeed without any further processing. Matching then contin- ues after the subroutine call. (*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine cause the subroutine match to fail. - (*THEN) skips to the next alternative in the innermost enclosing group - within the subpattern that has alternatives. If there is no such group + (*THEN) skips to the next alternative in the innermost enclosing group + within the subpattern that has alternatives. If there is no such group within the subpattern, (*THEN) causes the subroutine match to fail. SEE ALSO - pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2syntax(3), + pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2syntax(3), pcre2(3). @@ -8686,7 +8687,7 @@ AUTHOR REVISION - Last updated: 26 May 2017 + Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. ------------------------------------------------------------------------------ diff --git a/doc/pcre2_dfa_match.3 b/doc/pcre2_dfa_match.3 index 17ed86e..32a22c8 100644 --- a/doc/pcre2_dfa_match.3 +++ b/doc/pcre2_dfa_match.3 @@ -1,4 +1,4 @@ -.TH PCRE2_DFA_MATCH 3 "04 April 2017" "PCRE2 10.30" +.TH PCRE2_DFA_MATCH 3 "30 May 2017" "PCRE2 10.30" .SH NAME PCRE2 - Perl-compatible regular expressions (revised API) .SH SYNOPSIS @@ -34,8 +34,9 @@ just once (except when processing lookaround assertions). This function is \fIwscount\fP Number of elements in the vector .sp For \fBpcre2_dfa_match()\fP, a match context is needed only if you want to set -up a callout function or specify the recursion depth limit. The \fIlength\fP -and \fIstartoffset\fP values are code units, not characters. The options are: +up a callout function or specify the match and/or the recursion depth limits. +The \fIlength\fP and \fIstartoffset\fP values are code units, not characters. +The options are: .sp PCRE2_ANCHORED Match only at the first position PCRE2_ENDANCHORED Pattern can match only at end of subject diff --git a/doc/pcre2api.3 b/doc/pcre2api.3 index 5fb703e..34c9f37 100644 --- a/doc/pcre2api.3 +++ b/doc/pcre2api.3 @@ -1,4 +1,4 @@ -.TH PCRE2API 3 "26 May 2017" "PCRE2 10.30" +.TH PCRE2API 3 "30 May 2017" "PCRE2 10.30" .SH NAME PCRE2 - Perl-compatible regular expressions (revised API) .sp @@ -266,7 +266,7 @@ document for an overview of all the PCRE2 documentation. .B " void (*\fIprivate_free\fP)(void *, void *), void *\fImemory_data\fP);" .fi .sp -These functions became obsolete at release 10.30 and are retained only for +These functions became obsolete at release 10.30 and are retained only for backward compatibility. They should not be used in new code. The first is replaced by \fBpcre2_set_depth_limit()\fP; the second is no longer needed and has no effect (it always returns zero). @@ -365,10 +365,10 @@ documentation, and the .\" documentation describes how to compile and run it. .P -The compiling and matching functions recognize various options that are passed -as bits in an options argument. There are also some more complicated parameters -such as custom memory management functions and resource limits that are passed -in "contexts" (which are just memory blocks, described below). Simple +The compiling and matching functions recognize various options that are passed +as bits in an options argument. There are also some more complicated parameters +such as custom memory management functions and resource limits that are passed +in "contexts" (which are just memory blocks, described below). Simple applications do not need to make use of contexts. .P Just-in-time (JIT) compiler support is an optional feature of PCRE2 that can be @@ -384,7 +384,7 @@ More complicated programs might need to make use of the specialist functions .P JIT matching is automatically used by \fBpcre2_match()\fP if it is available, unless the PCRE2_NO_JIT option is set. There is also a direct interface for JIT -matching, which gives improved performance at the expense of less sanity +matching, which gives improved performance at the expense of less sanity checking. The JIT-specific functions are discussed in the .\" HREF \fBpcre2jit\fP @@ -646,7 +646,7 @@ following compile-time parameters: The newline character sequence The compile time nested parentheses limit The maximum length of the pattern string - The extra options bits (none set by default) + The extra options bits (none set by default) .sp A compile context is also required if you are using custom memory management. If none of these apply, just pass NULL as the context argument of @@ -695,9 +695,9 @@ in the current locale. .sp As PCRE2 has developed, almost all the 32 option bits that are available in the \fIoptions\fP argument of \fBpcre2_compile()\fP have been used up. To avoid -running out, the compile context contains a set of extra option bits which are -used for some newer, assumed rarer, options. This function sets those bits. It -always sets all the bits (either on or off). It does not modify any existing +running out, the compile context contains a set of extra option bits which are +used for some newer, assumed rarer, options. This function sets those bits. It +always sets all the bits (either on or off). It does not modify any existing setting. The available options are defined in the section entitled "Extra compile options" .\" HTML @@ -724,8 +724,8 @@ PCRE2_SIZE variable can hold, which is effectively unlimited. This specifies which characters or character sequences are to be recognized as newlines. The value must be one of PCRE2_NEWLINE_CR (carriage return only), PCRE2_NEWLINE_LF (linefeed only), PCRE2_NEWLINE_CRLF (the two-character -sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above), -PCRE2_NEWLINE_ANY (any Unicode newline sequence), or PCRE2_NEWLINE_NUL (the +sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above), +PCRE2_NEWLINE_ANY (any Unicode newline sequence), or PCRE2_NEWLINE_NUL (the NUL character, that is a binary zero). .P A pattern can override the value set in the compile context by starting with a @@ -778,7 +778,7 @@ A match context is required if you want to: .sp Set up a callout function Set an offset limit for matching an unanchored pattern - Change the limit on the amount of heap used when matching + Change the limit on the amount of heap used when matching Change the backtracking match limit Change the backtracking depth limit Set custom memory management specifically for the match @@ -846,7 +846,7 @@ In other words, whichever limit comes first is used. .B " uint32_t \fIvalue\fP);" .fi .sp -The \fIheap_limit\fP parameter specifies, in units of kilobytes, the maximum +The \fIheap_limit\fP parameter specifies, in units of kilobytes, the maximum amount of heap memory that \fBpcre2_match()\fP may use to hold backtracking information when running an interpretive match. This limit does not apply to matching with the JIT optimization, which has its own memory control @@ -855,8 +855,8 @@ arrangements (see the \fBpcre2jit\fP .\" documentation for more details), nor does it apply to \fBpcre2_dfa_match()\fP. -If the limit is reached, the negative error code PCRE2_ERROR_HEAPLIMIT is -returned. The default limit is set when PCRE2 is built; the default default is +If the limit is reached, the negative error code PCRE2_ERROR_HEAPLIMIT is +returned. The default limit is set when PCRE2 is built; the default default is very large and is essentially "unlimited". .P A value for the heap limit may also be supplied by an item at the start of a @@ -870,11 +870,11 @@ limit is set, less than the default. .P The \fBpcre2_match()\fP function starts out using a 20K vector on the system stack for recording backtracking points. The more nested backtracking points -there are (that is, the deeper the search tree), the more memory is needed. -Heap memory is used only if the initial vector is too small. If the heap limit -is set to a value less than 21 (in particular, zero) no heap memory will be -used. In this case, only patterns that do not have a lot of nested backtracking -can be successfully processed. +there are (that is, the deeper the search tree), the more memory is needed. +Heap memory is used only if the initial vector is too small. If the heap limit +is set to a value less than 21 (in particular, zero) no heap memory will be +used. In this case, only patterns that do not have a lot of nested backtracking +can be successfully processed. .sp .nf .B int pcre2_set_match_limit(pcre2_match_context *\fImcontext\fP, @@ -891,8 +891,8 @@ time round its main matching loop. If this value reaches the match limit, \fBpcre2_match()\fP returns the negative value PCRE2_ERROR_MATCHLIMIT. This has the effect of limiting the amount of backtracking that can take place. For patterns that are not anchored, the count restarts from zero for each position -in the subject string. This limit is not relevant to \fBpcre2_dfa_match()\fP, -which ignores it. +in the subject string. This limit also applies to \fBpcre2_dfa_match()\fP, +though the counting is done in a different way. .P When \fBpcre2_match()\fP is called with a pattern that was successfully processed by \fBpcre2_jit_compile()\fP, the way in which matching is executed @@ -909,8 +909,8 @@ of the form (*LIMIT_MATCH=ddd) .sp where ddd is a decimal number. However, such a setting is ignored unless ddd is -less than the limit set by the caller of \fBpcre2_match()\fP or, if no such -limit is set, less than the default. +less than the limit set by the caller of \fBpcre2_match()\fP or +\fBpcre2_dfa_match()\fP or, if no such limit is set, less than the default. .sp .nf .B int pcre2_set_depth_limit(pcre2_match_context *\fImcontext\fP, @@ -918,7 +918,7 @@ limit is set, less than the default. .fi .sp This parameter limits the depth of nested backtracking in \fBpcre2_match()\fP. -Each time a nested backtracking point is passed, a new memory "frame" is used +Each time a nested backtracking point is passed, a new memory "frame" is used to remember the state of matching at that point. Thus, this parameter indirectly limits the amount of memory that is used in a match. However, because the size of each memory "frame" depends on the number of capturing @@ -1040,7 +1040,7 @@ sequence that is recognized as meaning "newline". The values are: PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF) PCRE2_NEWLINE_ANY Any Unicode line ending PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF - PCRE2_NEWLINE_NUL The NUL character (binary zero) + PCRE2_NEWLINE_NUL The NUL character (binary zero) .sp The default should normally correspond to the standard sequence for your operating system. @@ -1270,7 +1270,7 @@ parenthesis. The name is not processed in any way, and it is not possible to include a closing parenthesis in the name. However, if the PCRE2_ALT_VERBNAMES option is set, normal backslash processing is applied to verb names and only an unescaped closing parenthesis terminates the name. A closing parenthesis can be -included in a name either as \e) or between \eQ and \eE. If the PCRE2_EXTENDED +included in a name either as \e) or between \eQ and \eE. If the PCRE2_EXTENDED or PCRE2_EXTENDED_MORE option is set, unescaped whitespace in verb names is skipped and #-comments are recognized in this mode, exactly as in the rest of the pattern. @@ -1290,12 +1290,12 @@ documentation. .sp If this bit is set, letters in the pattern match both upper and lower case letters in the subject. It is equivalent to Perl's /i option, and it can be -changed within a pattern by a (?i) option setting. If PCRE2_UTF is set, Unicode +changed within a pattern by a (?i) option setting. If PCRE2_UTF is set, Unicode properties are used for all characters with more than one other case, and for -all characters whose code points are greater than U+007f. For lower valued -characters with only one other case, a lookup table is used for speed. When -PCRE2_UTF is not set, a lookup table is used for all code points less than 256, -and higher code points (available only in 16-bit or 32-bit mode) are treated as +all characters whose code points are greater than U+007f. For lower valued +characters with only one other case, a lookup table is used for speed. When +PCRE2_UTF is not set, a lookup table is used for all code points less than 256, +and higher code points (available only in 16-bit or 32-bit mode) are treated as not having another case. .sp PCRE2_DOLLAR_ENDONLY @@ -1331,11 +1331,11 @@ documentation. PCRE2_ENDANCHORED .sp If this bit is set, the end of any pattern match must be right at the end of -the string being searched (the "subject string"). If the pattern match -succeeds by reaching (*ACCEPT), but does not reach the end of the subject, the -match fails at the current starting point. For unanchored patterns, a new match -is then tried at the next starting point. However, if the match succeeds by -reaching the end of the pattern, but not the end of the subject, backtracking +the string being searched (the "subject string"). If the pattern match +succeeds by reaching (*ACCEPT), but does not reach the end of the subject, the +match fails at the current starting point. For unanchored patterns, a new match +is then tried at the next starting point. However, if the match succeeds by +reaching the end of the pattern, but not the end of the subject, backtracking occurs and an alternative match may be found. Consider these two patterns: .sp .(*ACCEPT)|.. @@ -1346,9 +1346,9 @@ whereas the second matches "bc". The effect of PCRE2_ENDANCHORED can also be achieved by appropriate constructs in the pattern itself, which is the only way to do it in Perl. .P -For DFA matching with \fBpcre2_dfa_match()\fP, PCRE2_ENDANCHORED applies only +For DFA matching with \fBpcre2_dfa_match()\fP, PCRE2_ENDANCHORED applies only to the first (that is, the longest) matched string. Other parallel matches, -which are necessarily substrings of the first one, must obviously end before +which are necessarily substrings of the first one, must obviously end before the end of the subject. .sp PCRE2_EXTENDED @@ -1520,7 +1520,7 @@ current starting position, which in this case, it does. However, if the same match is run with PCRE2_NO_START_OPTIMIZE set, the initial scan along the subject string does not happen. The first match attempt is run starting from "D" and when this fails, (*COMMIT) prevents any further matches being tried, so -the overall result is "no match". +the overall result is "no match". .P There are also other start-up optimizations. For example, a minimum length for the subject may be recorded. Consider the pattern @@ -1556,12 +1556,12 @@ in the \fBpcre2unicode\fP .\" document. If an invalid UTF sequence is found, \fBpcre2_compile()\fP returns a -negative error code. +negative error code. .P If you know that your pattern is a valid UTF string, and you want to skip this check for performance reasons, you can set the PCRE2_NO_UTF_CHECK option. When it is set, the effect of passing an invalid UTF string as a pattern is -undefined. It may cause your program to crash or loop. +undefined. It may cause your program to crash or loop. .P Note that this option can also be passed to \fBpcre2_match()\fP and \fBpcre_dfa_match()\fP, to suppress UTF validity checking of the subject @@ -1575,7 +1575,7 @@ such as \ex{d800} you can set the PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES extra option, as described in the section entitled "Extra compile options" .\" HTML .\" -below. +below. .\" However, this is possible only in UTF-8 and UTF-32 modes, because these values are not representable in UTF-16. @@ -1642,13 +1642,13 @@ calling the \fBpcre2_set_compile_extra_options()\fP function are as follows: .sp PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES .sp -This option applies when compiling a pattern in UTF-8 or UTF-32 mode. It is +This option applies when compiling a pattern in UTF-8 or UTF-32 mode. It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode "surrogate" code points in the range 0xd800 to 0xdfff are used in pairs in UTF-16 to encode -code points with values in the range 0x10000 to 0x10ffff. The surrogates cannot +code points with values in the range 0x10000 to 0x10ffff. The surrogates cannot therefore be represented in UTF-16. They can be represented in UTF-8 and -UTF-32, but are defined as invalid code points, and cause errors if encountered -in a UTF-8 or UTF-32 string that is being checked for validity by PCRE2. +UTF-32, but are defined as invalid code points, and cause errors if encountered +in a UTF-8 or UTF-32 string that is being checked for validity by PCRE2. .P These values also cause errors if encountered in escape sequences such as \ex{d912} within a pattern. However, it seems that some applications, when @@ -1657,9 +1657,9 @@ for the surrogates using escape sequences. The PCRE2_NO_UTF_CHECK option does not disable the error that occurs, because it applies only to the testing of input strings for UTF validity. .P -If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surrogate code -point values in UTF-8 and UTF-32 patterns no longer provoke errors and are -incorporated in the compiled pattern. However, they can only match subject +If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surrogate code +point values in UTF-8 and UTF-32 patterns no longer provoke errors and are +incorporated in the compiled pattern. However, they can only match subject characters if the matching function is called with PCRE2_NO_UTF_CHECK set. . . @@ -1881,7 +1881,7 @@ The third argument should point to an \fBuint32_t\fP variable. If the pattern set a backtracking depth limit by including an item of the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The third argument should point to an unsigned 32-bit integer. If no such value has been set, the -call to \fBpcre2_pattern_info()\fP returns the error PCRE2_ERROR_UNSET. Note +call to \fBpcre2_pattern_info()\fP returns the error PCRE2_ERROR_UNSET. Note that this limit will only be used during matching if it is less than the limit set or defaulted by the caller of the match function. .sp @@ -2092,7 +2092,7 @@ The output is one of the following \fBuint32_t\fP values: PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF) PCRE2_NEWLINE_ANY Any Unicode line ending PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF - PCRE2_NEWLINE_NUL The NUL character (binary zero) + PCRE2_NEWLINE_NUL The NUL character (binary zero) .sp This identifies the character sequence that will be recognized as meaning "newline" while matching. @@ -2319,8 +2319,8 @@ instead of one. .P If a non-zero starting offset is passed when the pattern is anchored, a single attempt to match at the given offset is made. This can only succeed if the -pattern does not require the match to be at the start of the subject. In other -words, the anchoring must be the result of setting the PCRE2_ANCHORED option or +pattern does not require the match to be at the start of the subject. In other +words, the anchoring must be the result of setting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not by starting the pattern with ^ or \eA. . . @@ -2509,7 +2509,7 @@ start, it skips both the CR and the LF before retrying. However, the pattern reference, and so advances only by one character after the first failure. .P An explicit match for CR of LF is either a literal appearance of one of those -characters in the pattern, or one of the \er or \en or equivalent octal or +characters in the pattern, or one of the \er or \en or equivalent octal or hexadecimal escape sequences. Implicit matches such as [^X] do not count, nor does \es, even though it includes CR and LF in the characters that it matches. .P @@ -2769,9 +2769,9 @@ The backtracking match limit was reached. .sp PCRE2_ERROR_NOMEMORY .sp -If a pattern contains many nested backtracking points, heap memory is used to -remember them. This error is given when the memory allocation function (default -or custom) fails. Note that a different error, PCRE2_ERROR_HEAPLIMIT, is given +If a pattern contains many nested backtracking points, heap memory is used to +remember them. This error is given when the memory allocation function (default +or custom) fails. Note that a different error, PCRE2_ERROR_HEAPLIMIT, is given if the amount of memory needed exceeds the heap limit. .sp PCRE2_ERROR_NULL @@ -3491,6 +3491,6 @@ Cambridge, England. .rs .sp .nf -Last updated: 26 May 2017 +Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. .fi diff --git a/doc/pcre2build.3 b/doc/pcre2build.3 index 7537cbb..bbf5466 100644 --- a/doc/pcre2build.3 +++ b/doc/pcre2build.3 @@ -1,4 +1,4 @@ -.TH PCRE2BUILD 3 "10 April 2017" "PCRE2 10.30" +.TH PCRE2BUILD 3 "30 May 2017" "PCRE2 10.30" .SH NAME PCRE2 - Perl-compatible regular expressions (revised API) . @@ -256,9 +256,9 @@ setting such as .sp --with-match-limit=500000 .sp -to the \fBconfigure\fP command. This setting has no effect on the -\fBpcre2_dfa_match()\fP matching function, but it does also limit JIT matching -(though the counting is done differently). +to the \fBconfigure\fP command. This setting also applies to the +\fBpcre2_dfa_match()\fP matching function, and to JIT matching (though the +counting is done differently). .P The \fBpcre2_match()\fP function starts out using a 20K vector on the system stack to record backtracking points. The more nested backtracking points there @@ -572,6 +572,6 @@ Cambridge, England. .rs .sp .nf -Last updated: 10 April 2017 +Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. .fi diff --git a/doc/pcre2pattern.3 b/doc/pcre2pattern.3 index 81374c4..bafe1cd 100644 --- a/doc/pcre2pattern.3 +++ b/doc/pcre2pattern.3 @@ -1,4 +1,4 @@ -.TH PCRE2PATTERN 3 "26 May 2017" "PCRE2 10.30" +.TH PCRE2PATTERN 3 "30 May 2017" "PCRE2 10.30" .SH NAME PCRE2 - Perl-compatible regular expressions (revised API) .SH "PCRE2 REGULAR EXPRESSION DETAILS" @@ -169,11 +169,11 @@ still recognized for backwards compatibility. .P The heap limit applies only when the \fBpcre2_match()\fP interpreter is used for matching. It does not apply to JIT or DFA matching. The match limit is used -(but in a different way) when JIT is being used, but it is not relevant, and is -ignored, when matching with \fBpcre2_dfa_match()\fP. The depth limit is ignored -by JIT but is relevant for DFA matching, which uses function recursion for -recursions within the pattern. In this case, the depth limit controls the -amount of system stack that is used. +(but in a different way) when JIT is being used, or when +\fBpcre2_dfa_match()\fP is called, to limit computing resource usage by those +matching functions. The depth limit is ignored by JIT but is relevant for DFA +matching, which uses function recursion for recursions within the pattern. In +this case, the depth limit controls the amount of system stack that is used. . . .\" HTML @@ -3475,6 +3475,6 @@ Cambridge, England. .rs .sp .nf -Last updated: 26 May 2017 +Last updated: 30 May 2017 Copyright (c) 1997-2017 University of Cambridge. .fi diff --git a/src/pcre2_dfa_match.c b/src/pcre2_dfa_match.c index f9acba3..518eb83 100644 --- a/src/pcre2_dfa_match.c +++ b/src/pcre2_dfa_match.c @@ -396,6 +396,7 @@ BOOL utf = FALSE; BOOL reset_could_continue = FALSE; +if (mb->match_call_count++ >= mb->match_limit) return PCRE2_ERROR_MATCHLIMIT; if (rlevel++ > mb->match_limit_depth) return PCRE2_ERROR_DEPTHLIMIT; offsetcount &= (uint32_t)(-2); /* Round down */ @@ -3218,6 +3219,7 @@ if (mcontext == NULL) { mb->callout = NULL; mb->memctl = re->memctl; + mb->match_limit = PRIV(default_match_context).match_limit; mb->match_limit_depth = PRIV(default_match_context).depth_limit; } else @@ -3231,8 +3233,13 @@ else mb->callout = mcontext->callout; mb->callout_data = mcontext->callout_data; mb->memctl = mcontext->memctl; + mb->match_limit = mcontext->match_limit; mb->match_limit_depth = mcontext->depth_limit; } + +if (mb->match_limit > re->limit_match) + mb->match_limit = re->limit_match; + if (mb->match_limit_depth > re->limit_depth) mb->match_limit_depth = re->limit_depth; @@ -3244,6 +3251,7 @@ mb->end_subject = end_subject; mb->start_offset = start_offset; mb->moptions = options; mb->poptions = re->overall_options; +mb->match_call_count = 0; /* Process the \R and newline settings. */ diff --git a/src/pcre2_fuzzsupport.c b/src/pcre2_fuzzsupport.c index 7e0d550..48781ff 100644 --- a/src/pcre2_fuzzsupport.c +++ b/src/pcre2_fuzzsupport.c @@ -178,20 +178,20 @@ for (i = 0; i < 2; i++) return 0; } (void)pcre2_set_match_limit(match_context, 100); + (void)pcre2_set_depth_limit(match_context, 100); (void)pcre2_set_callout(match_context, callout_function, &callout_count); } - /* Match twice, with and without options, with a depth limit of 100. */ - - (void)pcre2_set_depth_limit(match_context, 100); + /* Match twice, with and without options. */ for (j = 0; j < 2; j++) { #ifdef STANDALONE printf("Match options %.8x", match_options); - printf("%s%s%s%s%s%s%s%s%s\n", + printf("%s%s%s%s%s%s%s%s%s%s\n", ((match_options & PCRE2_ANCHORED) != 0)? ",anchored" : "", ((match_options & PCRE2_ENDANCHORED) != 0)? ",endanchored" : "", + ((match_options & PCRE2_NO_JIT) != 0)? ",no_jit" : "", ((match_options & PCRE2_NO_UTF_CHECK) != 0)? ",no_utf_check" : "", ((match_options & PCRE2_NOTBOL) != 0)? ",notbol" : "", ((match_options & PCRE2_NOTEMPTY) != 0)? ",notempty" : "", @@ -217,9 +217,8 @@ for (i = 0; i < 2; i++) match_options = 0; /* For second time */ } - /* Match with DFA twice, with and without options, depth limit of 10. */ + /* Match with DFA twice, with and without options. */ - (void)pcre2_set_depth_limit(match_context, 10); match_options = save_match_options & ~PCRE2_NO_JIT; /* Not valid for DFA */ for (j = 0; j < 2; j++) diff --git a/src/pcre2_intmodedep.h b/src/pcre2_intmodedep.h index c5af7df..387f65e 100644 --- a/src/pcre2_intmodedep.h +++ b/src/pcre2_intmodedep.h @@ -877,7 +877,9 @@ typedef struct dfa_match_block { PCRE2_SPTR last_used_ptr; /* Latest consulted character */ const uint8_t *tables; /* Character tables */ PCRE2_SIZE start_offset; /* The start offset value */ + uint32_t match_limit; /* As it says */ uint32_t match_limit_depth; /* As it says */ + uint32_t match_call_count; /* Number of calls of internal function */ uint32_t moptions; /* Match options */ uint32_t poptions; /* Pattern options */ uint32_t nltype; /* Newline type */ diff --git a/src/pcre2test.c b/src/pcre2test.c index 737471d..08d3669 100644 --- a/src/pcre2test.c +++ b/src/pcre2test.c @@ -7054,17 +7054,15 @@ else for (gmatched = 0;; gmatched++) { capcount = 0; /* This stops compiler warnings */ - if ((dat_datctl.control & CTL_DFA) == 0) - { - if (FLD(compiled_code, executable_jit) == NULL || - (dat_datctl.options & PCRE2_NO_JIT) != 0) - { - (void)check_match_limit(pp, arg_ulen, PCRE2_ERROR_HEAPLIMIT, - "heap"); - } - capcount = check_match_limit(pp, arg_ulen, PCRE2_ERROR_MATCHLIMIT, - "match"); - } + if ((dat_datctl.control & CTL_DFA) == 0 && + (FLD(compiled_code, executable_jit) == NULL || + (dat_datctl.options & PCRE2_NO_JIT) != 0)) + { + (void)check_match_limit(pp, arg_ulen, PCRE2_ERROR_HEAPLIMIT, "heap"); + } + + capcount = check_match_limit(pp, arg_ulen, PCRE2_ERROR_MATCHLIMIT, + "match"); if (FLD(compiled_code, executable_jit) == NULL || (dat_datctl.options & PCRE2_NO_JIT) != 0 || diff --git a/testdata/testinput6 b/testdata/testinput6 index df38249..14bdaed 100644 --- a/testdata/testinput6 +++ b/testdata/testinput6 @@ -4941,4 +4941,7 @@ /(?<=|abc)/endanchored abcde\=aftertext +/(*LIMIT_MATCH=100).*(?![|H]?.*(?![|H]?););.*(?![|H]?.*(?![|H]?););\x00\x00\x00\x00\x00\x00\x00(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?![|);)?.*(![|H]?);)?.*(?![|H]?);)?.*(?![|H]?);)?.*(?![|H]););![|H]?););[|H]?);|H]?);)\x00\x00\x00 \x00\x00\x00H]?););?![|H]?);)?.*(?![|H]?););[||H]?);)?.*(?![|H]?););[|H]?);(?![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););;[\x00\x00\x00\x00\x00\x00\x00![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););/no_dotstar_anchor +.*(?![|H]?.*(?![|H]?););.*(?![|H]?.*(?![|H]?););\x00\x00\x00\x00\x00\x00\x00(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?![|);)?.*(![|H]?);)?.*(?![|H]?);)?.*(?![|H]?);)?.*(?![|H]););![|H]?););[|H]?);|H]?);)\x00\x00\x00 \x00\x00\x00H]?););?![|H]?);)?.*(?![|H]?););[||H]?);)?.*(?![|H]?););[|H]?);(?![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););;[\x00\x00\x00\x00\x00\x00\x00![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?);); + # End of testinput6 diff --git a/testdata/testoutput6 b/testdata/testoutput6 index f029123..a703ad3 100644 --- a/testdata/testoutput6 +++ b/testdata/testoutput6 @@ -7691,6 +7691,7 @@ Failed: error -53: matching depth limit exceeded /^(a(?2))(b)(?1)/ abbab\=find_limits +Minimum match limit = 4 Minimum depth limit = 2 0: abbab @@ -7766,4 +7767,8 @@ No match 0: 0+ +/(*LIMIT_MATCH=100).*(?![|H]?.*(?![|H]?););.*(?![|H]?.*(?![|H]?););\x00\x00\x00\x00\x00\x00\x00(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?![|);)?.*(![|H]?);)?.*(?![|H]?);)?.*(?![|H]?);)?.*(?![|H]););![|H]?););[|H]?);|H]?);)\x00\x00\x00 \x00\x00\x00H]?););?![|H]?);)?.*(?![|H]?););[||H]?);)?.*(?![|H]?););[|H]?);(?![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););;[\x00\x00\x00\x00\x00\x00\x00![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););/no_dotstar_anchor +.*(?![|H]?.*(?![|H]?););.*(?![|H]?.*(?![|H]?););\x00\x00\x00\x00\x00\x00\x00(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?!(?![|);)?.*(![|H]?);)?.*(?![|H]?);)?.*(?![|H]?);)?.*(?![|H]););![|H]?););[|H]?);|H]?);)\x00\x00\x00 \x00\x00\x00H]?););?![|H]?);)?.*(?![|H]?););[||H]?);)?.*(?![|H]?););[|H]?);(?![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?););;[\x00\x00\x00\x00\x00\x00\x00![|H]?););![|H]?););[|H]?);|H]?);)?.*(?![|H]?);); +Failed: error -47: match limit exceeded + # End of testinput6