diff --git a/src/config.h b/src/config.h deleted file mode 100644 index fd2c3d6..0000000 --- a/src/config.h +++ /dev/null @@ -1,295 +0,0 @@ -/* src/config.h. Generated from config.h.in by configure. */ -/* src/config.h.in. Generated from configure.ac by autoheader. */ - - -/* PCRE2 is written in Standard C, but there are a few non-standard things it -can cope with, allowing it to run on SunOS4 and other "close to standard" -systems. - -In environments that support the GNU autotools, config.h.in is converted into -config.h by the "configure" script. In environments that use CMake, -config-cmake.in is converted into config.h. If you are going to build PCRE2 "by -hand" without using "configure" or CMake, you should copy the distributed -config.h.generic to config.h, and edit the macro definitions to be the way you -need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, -so that config.h is included at the start of every source. - -Alternatively, you can avoid editing by using -D on the compiler command line -to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, -but if you do, default values will be taken from config.h for non-boolean -macros that are not defined on the command line. - -Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined -(conventionally to 1) for TRUE, and not defined at all for FALSE. All such -macros are listed as a commented #undef in config.h.generic. Macros such as -MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are -surrounded by #ifndef/#endif lines so that the value can be overridden by -D. - -PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if -HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make -sure both macros are undefined; an emulation function will then be used. */ - -/* By default, the \R escape sequence matches any Unicode line ending - character or sequence of characters. If BSR_ANYCRLF is defined (to any - value), this is changed so that backslash-R matches only CR, LF, or CRLF. - The build-time default can be overridden by the user of PCRE2 at runtime. - */ -/* #undef BSR_ANYCRLF */ - -/* If you are compiling for a system that uses EBCDIC instead of ASCII - character codes, define this macro to any value. When EBCDIC is set, PCRE2 - assumes that all input strings are in EBCDIC. If you do not define this - macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It - is not possible to build a version of PCRE2 that supports both EBCDIC and - UTF-8/16/32. */ -/* #undef EBCDIC */ - -/* In an EBCDIC environment, define this macro to any value to arrange for the - NL character to be 0x25 instead of the default 0x15. NL plays the role that - LF does in an ASCII/Unicode environment. */ -/* #undef EBCDIC_NL25 */ - -/* Define to 1 if you have the `bcopy' function. */ -#define HAVE_BCOPY 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_BZLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_DIRENT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_DLFCN_H 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_EDITLINE_READLINE_H */ - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_EDIT_READLINE_READLINE_H */ - -/* Define to 1 if you have the header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_LIMITS_H 1 - -/* Define to 1 if you have the `memmove' function. */ -#define HAVE_MEMMOVE 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_MEMORY_H 1 - -/* Define if you have POSIX threads libraries and header files. */ -#define HAVE_PTHREAD 1 - -/* Have PTHREAD_PRIO_INHERIT. */ -#define HAVE_PTHREAD_PRIO_INHERIT 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_READLINE_HISTORY_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_READLINE_READLINE_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the `strerror' function. */ -#define HAVE_STRERROR 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to 1 if the compiler supports simple visibility declarations. */ -#define HAVE_VISIBILITY 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_WINDOWS_H */ - -/* Define to 1 if you have the header file. */ -#define HAVE_ZLIB_H 1 - -/* PCRE2 uses recursive function calls to handle backtracking while matching. - This can sometimes be a problem on systems that have stacks of limited - size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't - use recursion in the match() function; instead it creates its own stack by - steam using memory from the heap. For more detail, see the comments and - other stuff just above the match() function. */ -/* #undef HEAP_MATCH_RECURSE */ - -/* The value of LINK_SIZE determines the number of bytes used to store links - as offsets within the compiled regex. The default is 2, which allows for - compiled patterns up to 64K long. This covers the vast majority of cases. - However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This - allows for longer patterns in extreme cases. */ -#define LINK_SIZE 2 - -/* Define to the sub-directory where libtool stores uninstalled libraries. */ -#define LT_OBJDIR ".libs/" - -/* The value of MATCH_LIMIT determines the default number of times the - internal match() function can be called during a single execution of - pcre2_match(). There is a runtime interface for setting a different limit. - The limit exists in order to catch runaway regular expressions that take - for ever to determine that they do not match. The default is set very large - so that it does not accidentally catch legitimate cases. */ -#define MATCH_LIMIT 10000000 - -/* The above limit applies to all calls of match(), whether or not they - increase the recursion depth. In some environments it is desirable to limit - the depth of recursive calls of match() more strictly, in order to restrict - the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined) - that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive - calls of match(). To have any useful effect, it must be less than the value - of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There - is a runtime method for setting a different limit. */ -#define MATCH_LIMIT_RECURSION MATCH_LIMIT - -/* This limit is parameterized just in case anybody ever wants to change it. - Care must be taken if it is increased, because it guards against integer - overflow caused by enormously large patterns. */ -#define MAX_NAME_COUNT 10000 - -/* This limit is parameterized just in case anybody ever wants to change it. - Care must be taken if it is increased, because it guards against integer - overflow caused by enormously large patterns. */ -#define MAX_NAME_SIZE 32 - -/* The value of NEWLINE_DEFAULT determines the default newline character - sequence. PCRE2 client programs can override this by selecting other values - at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5 - (ANYCRLF). */ -#define NEWLINE_DEFAULT 2 - -/* Name of package */ -#define PACKAGE "pcre2" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "PCRE2" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "PCRE2 10.21-RC1" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "pcre2" - -/* Define to the home page for this package. */ -#define PACKAGE_URL "" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "10.21-RC1" - -/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested - parentheses (of any kind) in a pattern. This limits the amount of system - stack that is used while compiling a pattern. */ -#define PARENS_NEST_LIMIT 250 - -/* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by - pcre2grep to hold parts of the file it is searching. This is also the - minimum value. The actual amount of memory used by pcre2grep is three times - this number, because it allows for the buffering of "before" and "after" - lines. */ -#define PCRE2GREP_BUFSIZE 20480 - -/* to make a symbol visible */ -#define PCRE2POSIX_EXP_DECL extern __attribute__ ((visibility ("default"))) - -/* to make a symbol visible */ -#define PCRE2POSIX_EXP_DEFN extern __attribute__ ((visibility ("default"))) - -/* Define to any value to include debugging code. */ -/* #undef PCRE2_DEBUG */ - -/* to make a symbol visible */ -#define PCRE2_EXP_DECL extern __attribute__ ((visibility ("default"))) - - -/* If you are compiling for a system other than a Unix-like system or - Win32, and it needs some magic to be inserted before the definition - of a function that is exported by the library, define this macro to - contain the relevant magic. If you do not define this macro, a suitable - __declspec value is used for Windows systems; in other environments - "extern" is used for a C compiler and "extern C" for a C++ compiler. - This macro apears at the start of every exported function that is part - of the external API. It does not appear on functions that are "external" - in the C sense, but which are internal to the library. */ -#define PCRE2_EXP_DEFN __attribute__ ((visibility ("default"))) - -/* Define to any value if linking statically (TODO: make nice with Libtool) */ -#define PCRE2_STATIC 1 - -/* Define to necessary symbol if this constant uses a non-standard name on - your system. */ -/* #undef PTHREAD_CREATE_JOINABLE */ - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define to any value to enable support for Just-In-Time compiling. */ -#define SUPPORT_JIT /**/ - -/* Define to any value to allow pcre2grep to be linked with libbz2, so that it - is able to handle .bz2 files. */ -#define SUPPORT_LIBBZ2 /**/ - -/* Define to any value to allow pcre2test to be linked with libedit. */ -/* #undef SUPPORT_LIBEDIT */ - -/* Define to any value to allow pcre2test to be linked with libreadline. */ -#define SUPPORT_LIBREADLINE /**/ - -/* Define to any value to allow pcre2grep to be linked with libz, so that it - is able to handle .gz files. */ -#define SUPPORT_LIBZ /**/ - -/* Define to any value to enable JIT support in pcre2grep. */ -#define SUPPORT_PCRE2GREP_JIT /**/ - -/* Define to any value to enable the 16 bit PCRE2 library. */ -#define SUPPORT_PCRE2_16 /**/ - -/* Define to any value to enable the 32 bit PCRE2 library. */ -#define SUPPORT_PCRE2_32 /**/ - -/* Define to any value to enable the 8 bit PCRE2 library. */ -#define SUPPORT_PCRE2_8 /**/ - -/* Define to any value to enable support for Unicode and UTF encoding. This - will work even in an EBCDIC environment, but it is incompatible with the - EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* - ASCII/Unicode, but not both at once. */ -#define SUPPORT_UNICODE /**/ - -/* Define to any value for valgrind support to find invalid memory reads. */ -#define SUPPORT_VALGRIND /**/ - -/* Version number of package */ -#define VERSION "10.21-RC1" - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #undef const */ - -/* Define to the type of a signed integer type of width exactly 64 bits if - such a type exists and the standard includes do not define it. */ -/* #undef int64_t */ - -/* Define to `unsigned int' if does not define. */ -/* #undef size_t */