pcre2test man page

Return to the PCRE2 index page.

This page is part of the PCRE2 HTML documentation. It was generated automatically from the original man page. If there is any nonsense in it, please consult the man page, in case the conversion went wrong.


SYNOPSIS

pcre2test [options] [input file [output file]]

pcre2test is a test program for the PCRE2 regular expression libraries, but it can also be used for experimenting with regular expressions. This document describes the features of the test program; for details of the regular expressions themselves, see the pcre2pattern documentation. For details of the PCRE2 library function calls and their options, see the pcre2api documentation.

The input for pcre2test is a sequence of regular expression patterns and subject strings to be matched. The output shows the result of each match attempt. Modifiers on the command line, the patterns, and the subject lines specify PCRE2 function options, control how the subject is processed, and what output is produced.

As the original fairly simple PCRE library evolved, it acquired many different features, and as a result, the original pcretest program ended up with a lot of options in a messy, arcane syntax, for testing all the features. The move to the new PCRE2 API provided an opportunity to re-implement the test program as pcre2test, with a cleaner modifier syntax. Nevertheless, there are still many obscure modifiers, some of which are specifically designed for use in conjunction with the test script and data files that are distributed as part of PCRE2. All the modifiers are documented here, some without much justification, but many of them are unlikely to be of use except when testing the libraries.


PCRE2's 8-BIT, 16-BIT AND 32-BIT LIBRARIES

Different versions of the PCRE2 library can be built to support character strings that are encoded in 8-bit, 16-bit, or 32-bit code units. One, two, or all three of these libraries may be simultaneously installed. The pcre2test program can be used to test all the libraries. However, its own input and output are always in 8-bit format. When testing the 16-bit or 32-bit libraries, patterns and subject strings are converted to 16- or 32-bit format before being passed to the library functions. Results are converted back to 8-bit code units for output.

In the rest of this document, the names of library functions and structures are given in generic form, for example, pcre_compile(). The actual names used in the libraries have a suffix _8, _16, or _32, as appropriate.


INPUT ENCODING

Input to pcre2test is processed line by line, either by calling the C library's fgets() function, or via the libreadline library (see below). In Unix-like environments, fgets() treats any bytes other than newline as data characters. However, in some Windows environments character 26 (hex 1A) causes an immediate end of file, and no further data is read. For maximum portability, therefore, it is safest to avoid non-printing characters in pcre2test input files.


COMMAND LINE OPTIONS

-8 If the 8-bit library has been built, this option causes it to be used (this is the default). If the 8-bit library has not been built, this option causes an error.

-16 If the 16-bit library has been built, this option causes it to be used. If only the 16-bit library has been built, this is the default. If the 16-bit library has not been built, this option causes an error.

-32 If the 32-bit library has been built, this option causes it to be used. If only the 32-bit library has been built, this is the default. If the 32-bit library has not been built, this option causes an error.

-b Behave as if each pattern has the /fullbincode modifier; the full internal binary form of the pattern is output after compilation.

-C Output the version number of the PCRE2 library, and all available information about the optional features that are included, and then exit with zero exit code. All other options are ignored.

-C option Output information about a specific build-time option, then exit. This functionality is intended for use in scripts such as RunTest. The following options output the value and set the exit code as indicated:

  ebcdic-nl  the code for LF (= NL) in an EBCDIC environment:
               0x15 or 0x25
               0 if used in an ASCII environment
               exit code is always 0
  linksize   the configured internal link size (2, 3, or 4)
               exit code is set to the link size
  newline    the default newline setting:
               CR, LF, CRLF, ANYCRLF, or ANY
               exit code is always 0
  bsr        the default setting for what \R matches:
               ANYCRLF or ANY
               exit code is always 0
The following options output 1 for true or 0 for false, and set the exit code to the same value:
  ebcdic     compiled for an EBCDIC environment
  jit        just-in-time support is available
  pcre2-16   the 16-bit library was built
  pcre2-32   the 32-bit library was built
  pcre2-8    the 8-bit library was built
  unicode    Unicode support is available
If an unknown option is given, an error message is output; the exit code is 0.

-d Behave as if each pattern has the debug modifier; the internal form and information about the compiled pattern is output after compilation; -d is equivalent to -b -i.

-dfa Behave as if each subject line has the dfa modifier; matching is done using the pcre2_dfa_match() function instead of the default pcre2_match().

-help Output a brief summary these options and then exit.

-i Behave as if each pattern has the /info modifier; information about the compiled pattern is given after compilation.

-jit Behave as if each pattern line has the jit modifier; after successful compilation, each pattern is passed to the just-in-time compiler, if available.

\fB-pattern\fB modifier-list Behave as if each pattern line contains the given modifiers.

-q Do not output the version number of pcre2test at the start of execution.

-S size On Unix-like systems, set the size of the run-time stack to size megabytes.

-subject modifier-list Behave as if each subject line contains the given modifiers.

-t Run each compile and match many times with a timer, and output the resulting times per compile or match. When JIT is used, separate times are given for the initial compile and the JIT compile. You can control the number of iterations that are used for timing by following -t with a number (as a separate item on the command line). For example, "-t 1000" iterates 1000 times. The default is to iterate 500,000 times.

-tm This is like -t except that it times only the matching phase, not the compile phase.

-T -TM These behave like -t and -tm, but in addition, at the end of a run, the total times for all compiles and matches are output.

-version Output the PCRE2 version number and then exit.


DESCRIPTION

If pcre2test is given two filename arguments, it reads from the first and writes to the second. If the first name is "-", input is taken from the standard input. If pcre2test is given only one argument, it reads from that file and writes to stdout. Otherwise, it reads from stdin and writes to stdout. When the input is a terminal, it prompts for each line of input, using "re>" to prompt for regular expression patterns, and "data>" to prompt for subject lines.

When pcre2test is built, a configuration option can specify that it should be linked with the libreadline or libedit library. When this is done, if the input is from a terminal, it is read using the readline() function. This provides line-editing and history facilities. The output from the -help option states whether or not readline() will be used.

The program handles any number of tests, each of which consists of a set of input lines. Each set starts with a regular expression pattern, followed by any number of subject lines to be matched against that pattern. In between sets of test data, command lines that begin with a hash (#) character may appear. This file format, with some restrictions, can also be processed by the perltest.sh script that is distributed with PCRE2 as a means of checking that the behaviour of PCRE2 and Perl is the same.

Each subject line is matched separately and independently. If you want to do multi-line matches, you have to use the \n escape sequence (or \r or \r\n, etc., depending on the newline setting) in a single line of input to encode the newline sequences. There is no limit on the length of subject lines; the input buffer is automatically extended if it is too small. There is a replication feature that makes it possible to generate long subject lines without having to supply them explicitly.

An empty line or the end of the file signals the end of the subject lines for a test, at which point a new pattern or command line is expected if there is still input to be read.


COMMAND LINES

In between sets of test data, a line that begins with a hash (#) character is interpreted as a command line. If the first character is followed by white space or an exclamation mark, the line is treated as a comment, and ignored. Otherwise, the following commands are recognized:

  #forbid_utf
Subsequent patterns automatically have the PCRE2_NEVER_UTF and PCRE2_NEVER_UCP options set, which locks out the use of UTF and Unicode property features. This is a trigger guard that is used in test files to ensure that UTF/Unicode tests are not accidentally added to files that are used when UTF support is not included in the library. This effect can also be obtained by the use of #pattern; the difference is that #forbid_utf cannot be unset, and the automatic options are not displayed in pattern information, to avoid cluttering up test output.
  #pattern <modifier-list>
This command sets a default modifier list that applies to all subsequent patterns. Modifiers on a pattern can change these settings.
  #perltest
The appearance of this line causes all subsequent modifier settings to be checked for compatibility with the perltest.sh script, which is used to confirm that Perl gives the same results as PCRE2. Also, apart from comment lines, none of the other command lines are permitted, because they and many of the modifiers are specific to pcre2test, and should not be used in test files that are also processed by perltest.sh. The \fP#perltest\fB command helps detect tests that are accidentally put in the wrong file.
  #subject <modifier-list>
This command sets a default modifier list that applies to all subsequent subject lines. Modifiers on a subject line can change these settings.


MODIFIER SYNTAX

Modifier lists are used with both pattern and subject lines. Items in a list are separated by commas and optional white space. Some modifiers may be given for both patterns and subject lines, whereas others are valid for one or the other only. Each modifier has a long name, for example "anchored", and some of them must be followed by an equals sign and a value, for example, "offset=12". Modifiers that do not take values may be preceded by a minus sign to turn off a previous setting.

A few of the more common modifiers can also be specified as single letters, for example "i" for "caseless". In documentation, following the Perl convention, these are written with a slash ("the /i modifier") for clarity. Abbreviated modifiers must all be concatenated in the first item of a modifier list. If the first item is not recognized as a long modifier name, it is interpreted as a sequence of these abbreviations. For example:

  /abc/ig,newline=cr,jit=3
This is a pattern line whose modifier list starts with two one-letter modifiers (/i and /g). The lower-case abbreviated modifiers are the same as used in Perl.


PATTERN SYNTAX

A pattern line must start with one of the following characters (common symbols, excluding pattern meta-characters):

  / ! " ' ` - = _ : ; , % & @ ~
This is interpreted as the pattern's delimiter. A regular expression may be continued over several input lines, in which case the newline characters are included within it. It is possible to include the delimiter within the pattern by escaping it with a backslash, for example
  /abc\/def/
If you do this, the escape and the delimiter form part of the pattern, but since the delimiters are all non-alphanumeric, this does not affect its interpretation. If the terminating delimiter is immediately followed by a backslash, for example,
  /abc/\
then a backslash is added to the end of the pattern. This is done to provide a way of testing the error condition that arises if a pattern finishes with a backslash, because
  /abc\/
is interpreted as the first line of a pattern that starts with "abc/", causing pcre2test to read the next line as a continuation of the regular expression.

A pattern can be followed by a modifier list (details below).


SUBJECT LINE SYNTAX

Before each subject line is passed to pcre2_match() or pcre2_dfa_match(), leading and trailing white space is removed, and the line is scanned for backslash escapes. The following provide a means of encoding non-printing characters in a visible way:

  \a         alarm (BEL, \x07)
  \b         backspace (\x08)
  \e         escape (\x27)
  \f         form feed (\x0c)
  \n         newline (\x0a)
  \r         carriage return (\x0d)
  \t         tab (\x09)
  \v         vertical tab (\x0b)
  \nnn       octal character (up to 3 octal digits); always
               a byte unless > 255 in UTF-8 or 16-bit or 32-bit mode
  \o{dd...}  octal character (any number of octal digits}
  \xhh       hexadecimal byte (up to 2 hex digits)
  \x{hh...}  hexadecimal character (any number of hex digits)
The use of \x{hh...} is not dependent on the use of the utf modifier on the pattern. It is recognized always. There may be any number of hexadecimal digits inside the braces; invalid values provoke error messages.

Note that \xhh specifies one byte rather than one character in UTF-8 mode; this makes it possible to construct invalid UTF-8 sequences for testing purposes. On the other hand, \x{hh} is interpreted as a UTF-8 character in UTF-8 mode, generating more than one byte if the value is greater than 127. When testing the 8-bit library not in UTF-8 mode, \x{hh} generates one byte for values less than 256, and causes an error for greater values.

In UTF-16 mode, all 4-digit \x{hhhh} values are accepted. This makes it possible to construct invalid UTF-16 sequences for testing purposes.

In UTF-32 mode, all 4- to 8-digit \x{...} values are accepted. This makes it possible to construct invalid UTF-32 sequences for testing purposes.

There is a special backslash sequence that specifies replication of one or more characters:

  \[<characters>]{<count>}
This makes it possible to test long strings without having to provide them as part of the file. For example:
  \[abc]{4}
is converted to "abcabcabcabc". This feature does not support nesting. To include a closing square bracket in the characters, code it as \x5D.

A backslash followed by an equals sign marks the end of the subject string and the start of a modifier list. For example:

  abc\=notbol,notempty
A backslash followed by any other non-alphanumeric character just escapes that character. A backslash followed by anything else causes an error. However, if the very last character in the line is a backslash (and there is no modifier list), it is ignored. This gives a way of passing an empty line as data, since a real empty line terminates the data input.


PATTERN MODIFIERS

There are three types of modifier that can appear in pattern lines, two of which may also be used in a #pattern command. A pattern's modifier list can add to or override default modifiers that were set by a previous #pattern command.


Setting compilation options

The following modifiers set options for pcre2_compile(). The most common ones have single-letter abbreviations. See pcreapi for a description of their effects.

      allow_empty_class         set PCRE2_ALLOW_EMPTY_CLASS
      alt_bsux                  set PCRE2_ALT_BSUX
      anchored                  set PCRE2_ANCHORED
      auto_callout              set PCRE2_AUTO_CALLOUT
  /i  caseless                  set PCRE2_CASELESS
      dollar_endonly            set PCRE2_DOLLAR_ENDONLY
  /s  dotall                    set PCRE2_DOTALL
      dupnames                  set PCRE2_DUPNAMES
  /x  extended                  set PCRE2_EXTENDED
      firstline                 set PCRE2_FIRSTLINE
      match_unset_backref       set PCRE2_MATCH_UNSET_BACKREF
  /m  multiline                 set PCRE2_MULTILINE
      never_ucp                 set PCRE2_NEVER_UCP
      never_utf                 set PCRE2_NEVER_UTF
      no_auto_capture           set PCRE2_NO_AUTO_CAPTURE
      no_auto_possess           set PCRE2_NO_AUTO_POSSESS
      no_start_optimize         set PCRE2_NO_START_OPTIMIZE
      no_utf_check              set PCRE2_NO_UTF_CHECK
      ucp                       set PCRE2_UCP
      ungreedy                  set PCRE2_UNGREEDY
      utf                       set PCRE2_UTF
As well as turning on the PCRE2_UTF option, the utf modifier causes all non-printing characters in output strings to be printed using the \x{hh...} notation. Otherwise, those less than 0x100 are output in hex without the curly brackets.


Setting compilation controls

The following modifiers affect the compilation process or request information about the pattern:

      bsr=[anycrlf|unicode]     specify \R handling
  /B  bincode                   show binary code without lengths
      debug                     same as info,fullbincode
      fullbincode               show binary code with lengths
  /I  info                      show info about compiled pattern
      hex                       pattern is coded in hexadecimal
      jit[=<number>]            use JIT
      jitfast                   use JIT fast path
      jitverify                 verify JIT use
      locale=<name>             use this locale
      memory                    show memory used
      newline=<type>            set newline type
      parens_nest_limit=<n>     set maximum parentheses depth
      perlcompat                lock out non-Perl modifiers
      posix                     use the POSIX API
      stackguard=<number>       test the stackguard feature
      tables=[0|1|2]            select internal tables
The effects of these modifiers are described in the following sections.


Newline and \R handling

The bsr modifier specifies what \R in a pattern should match. If it is set to "anycrlf", \R matches CR, LF, or CRLF only. If it is set to "unicode", \R matches any Unicode newline sequence. The default is specified when PCRE2 is built, with the default default being Unicode.

The newline modifier specifies which characters are to be interpreted as newlines, both in the pattern and in subject lines. The type must be one of CR, LF, CRLF, ANYCRLF, or ANY (in upper or lower case).


Information about a pattern

The debug modifier is a shorthand for info,fullbincode, requesting all available information.

The bincode modifier causes a representation of the compiled code to be output after compilation. This information does not contain length and offset values, which ensures that the same output is generated for different internal link sizes and different code unit widths. By using bincode, the same regression tests can be used in different environments.

The fullbincode modifier, by contrast, does include length and offset values. This is used in a few special tests that run only for specific code unit widths and link sizes, and is also useful for one-off tests.

The info modifier requests information about the compiled pattern (whether it is anchored, has a fixed first character, and so on). The information is obtained from the pcre2_pattern_info() function. Here are some typical examples:

    re> /(?i)(^a|^b)/m,info
  Capturing subpattern count = 1
  Compile options: multiline
  Overall options: caseless multiline
  First code unit at start or follows newline
  Subject length lower bound = 1

    re> /(?i)abc/info
  Capturing subpattern count = 0
  Compile options: <none>
  Overall options: caseless
  First code unit = 'a' (caseless)
  Last code unit = 'c' (caseless)
  Subject length lower bound = 3
"Compile options" are those specified by modifiers; "overall options" have added options that are taken or deduced from the pattern. If both sets of options are the same, just a single "options" line is output; if there are no options, the line is omitted. "First code unit" is where any match must start; if there is more than one they are listed as "starting code units". "Last code unit" is the last literal code unit that must be present in any match. This is not necessarily the last character. These lines are omitted if no starting or ending code units are recorded.


Specifying a pattern in hex

The hex modifier specifies that the characters of the pattern are to be interpreted as pairs of hexadecimal digits. White space is permitted between pairs. For example:

  /ab 32 59/hex
This feature is provided as a way of creating patterns that contain binary zero and other non-printing characters. By default, pcre2test passes patterns as zero-terminated strings to pcre2_compile(), giving the length as PCRE2_ZERO_TERMINATED. However, for patterns specified in hexadecimal, the actual length of the pattern is passed.


JIT compilation

The /jit modifier may optionally be followed by an equals sign and a number in the range 0 to 7:

  0  disable JIT
  1  use JIT for normal match only
  2  use JIT for soft partial match only
  3  use JIT for normal match and soft partial match
  4  use JIT for hard partial match only
  6  use JIT for soft and hard partial match
  7  all three modes
If no number is given, 7 is assumed. If JIT compilation is successful, the compiled JIT code will automatically be used when pcre2_match() is run for the appropriate type of match, except when incompatible run-time options are specified. For more details, see the pcre2jit documentation. See also the jitstack modifier below for a way of setting the size of the JIT stack.

If the jitfast modifier is specified, matching is done using the JIT "fast path" interface, \fBpcre2_jit_match(), which skips some of the sanity checks that are done by pcre2_match(), and of course does not work when JIT is not supported. If jitfast is specified without jit, jit=7 is assumed.

If the jitverify modifier is specified, information about the compiled pattern shows whether JIT compilation was or was not successful. If jitverify is specified without jit, jit=7 is assumed. If JIT compilation is successful when jitverify is set, the text "(JIT)" is added to the first output line after a match or non match when JIT-compiled code was actually used in the match.


Setting a locale

The /locale modifier must specify the name of a locale, for example:

  /pattern/locale=fr_FR
The given locale is set, pcre2_maketables() is called to build a set of character tables for the locale, and this is then passed to pcre2_compile() when compiling the regular expression. The same tables are used when matching the following subject lines. The /locale modifier applies only to the pattern on which it appears, but can be given in a #pattern command if a default is needed. Setting a locale and alternate character tables are mutually exclusive.


Showing pattern memory

The /memory modifier causes the size in bytes of the memory used to hold the compiled pattern to be output. This does not include the size of the pcre2_code block; it is just the actual compiled data. If the pattern is subsequently passed to the JIT compiler, the size of the JIT compiled code is also output. Here is an example:

    re> /a(b)c/jit,memory
  Memory allocation (code space): 21
  Memory allocation (JIT code): 1910


Limiting nested parentheses

The parens_nest_limit modifier sets a limit on the depth of nested parentheses in a pattern. Breaching the limit causes a compilation error. The default for the library is set when PCRE2 is built, but pcre2test sets its own default of 220, which is required for running the standard test suite.


Using the POSIX wrapper API

The /posix modifier causes pcre2test to call PCRE2 via the POSIX wrapper API rather than its native API. This supports only the 8-bit library. When the POSIX API is being used, the following pattern modifiers set options for the regcomp() function:

  caseless           REG_ICASE
  multiline          REG_NEWLINE
  no_auto_capture    REG_NOSUB
  dotall             REG_DOTALL     )
  ungreedy           REG_UNGREEDY   ) These options are not part of
  ucp                REG_UCP        )   the POSIX standard
  utf                REG_UTF8       )
The aftertext and allaftertext subject modifiers work as described below. All other modifiers cause an error.


Testing the stack guard feature

The /stackguard modifier is used to test the use of pcre2_set_compile_recursion_guard(), a function that is provided to enable stack availability to be checked during compilation (see the pcre2api documentation for details). If the number specified by the modifier is greater than zero, pcre2_set_compile_recursion_guard() is called to set up callback from pcre2_compile() to a local function. The argument it receives is the current nesting parenthesis depth; if this is greater than the value given by the modifier, non-zero is returned, causing the compilation to be aborted.


Using alternative character tables

The value specified for the /tables modifier must be one of the digits 0, 1, or 2. It causes a specific set of built-in character tables to be passed to pcre2_compile(). This is used in the PCRE2 tests to check behaviour with different character tables. The digit specifies the tables as follows:

  0   do not pass any special character tables
  1   the default ASCII tables, as distributed in
        pcre2_chartables.c.dist
  2   a set of tables defining ISO 8859 characters
In table 2, some characters whose codes are greater than 128 are identified as letters, digits, spaces, etc. Setting alternate character tables and a locale are mutually exclusive.


Setting certain match controls

The following modifiers are really subject modifiers, and are described below. However, they may be included in a pattern's modifier list, in which case they are applied to every subject line that is processed with that pattern. They do not affect the compilation process.

      aftertext           show text after match
      allaftertext        show text after captures
      allcaptures         show all captures
      allusedtext         show all consulted text
  /g  global              global matching
      mark                show mark values
      replace=<string>    specify a replacement string
      startchar           show starting character when relevant
These modifiers may not appear in a #pattern command. If you want them as defaults, set them in a #subject command.


SUBJECT MODIFIERS

The modifiers that can appear in subject lines and the #subject command are of two types.


Setting match options

The following modifiers set options for pcre2_match() or pcre2_dfa_match(). See pcreapi for a description of their effects.

      anchored                  set PCRE2_ANCHORED
      dfa_restart               set PCRE2_DFA_RESTART
      dfa_shortest              set PCRE2_DFA_SHORTEST
      no_utf_check              set PCRE2_NO_UTF_CHECK
      notbol                    set PCRE2_NOTBOL
      notempty                  set PCRE2_NOTEMPTY
      notempty_atstart          set PCRE2_NOTEMPTY_ATSTART
      noteol                    set PCRE2_NOTEOL
      partial_hard (or ph)      set PCRE2_PARTIAL_HARD
      partial_soft (or ps)      set PCRE2_PARTIAL_SOFT
The partial matching modifiers are provided with abbreviations because they appear frequently in tests.

If the /posix modifier was present on the pattern, causing the POSIX wrapper API to be used, the only option-setting modifiers that have any effect are notbol, notempty, and noteol, causing REG_NOTBOL, REG_NOTEMPTY, and REG_NOTEOL, respectively, to be passed to regexec(). Any other modifiers cause an error.


Setting match controls

The following modifiers affect the matching process or request additional information. Some of them may also be specified on a pattern line (see above), in which case they apply to every subject line that is matched against that pattern.

      aftertext                 show text after match
      allaftertext              show text after captures
      allcaptures               show all captures
      allusedtext               show all consulted text (non-JIT only)
      altglobal                 alternative global matching
      callout_capture           show captures at callout time
      callout_data=<n>          set a value to pass via callouts
      callout_fail=<n>[:<m>]    control callout failure
      callout_none              do not supply a callout function
      copy=<number or name>     copy captured substring
      dfa                       use pcre2_dfa_match()
      find_limits               find match and recursion limits
      get=<number or name>      extract captured substring
      getall                    extract all captured substrings
  /g  global                    global matching
      jitstack=<n>              set size of JIT stack
      mark                      show mark values
      match_limit=>n>           set a match limit
      memory                    show memory usage
      offset=<n>                set starting offset
      ovector=<n>               set size of output vector
      recursion_limit=<n>       set a recursion limit
      replace=<string>          specify a replacement string
      startchar                 show startchar when relevant
      zero_terminate            pass the subject as zero-terminated
The effects of these modifiers are described in the following sections.


Showing more text

The aftertext modifier requests that as well as outputting the part of the subject string that matched the entire pattern, pcre2test should in addition output the remainder of the subject string. This is useful for tests where the subject contains multiple copies of the same substring. The allaftertext modifier requests the same action for captured substrings as well as the main matched substring. In each case the remainder is output on the following line with a plus character following the capture number.

The allusedtext modifier requests that all the text that was consulted during a successful pattern match by the interpreter should be shown. This feature is not supported for JIT matching, and if requested with JIT it is ignored (with a warning message). Setting this modifier affects the output if there is a lookbehind at the start of a match, or a lookahead at the end, or if \K is used in the pattern. Characters that precede or follow the start and end of the actual match are indicated in the output by '<' or '>' characters underneath them. Here is an example:

    re> /(?<=pqr)abc(?=xyz)/
  data> 123pqrabcxyz456\=allusedtext
   0: pqrabcxyz
      <<<   >>>
This shows that the matched string is "abc", with the preceding and following strings "pqr" and "xyz" having been consulted during the match (when processing the assertions).

The startchar modifier requests that the starting character for the match be indicated, if it is different to the start of the matched string. The only time when this occurs is when \K has been processed as part of the match. In this situation, the output for the matched string is displayed from the starting character instead of from the match point, with circumflex characters under the earlier characters. For example:

    re> /abc\Kxyz/
  data> abcxyz\=startchar
   0: abcxyz
      ^^^
Unlike allusedtext, the startchar modifier can be used with JIT. However, these two modifiers are mutually exclusive.


Showing the value of all capture groups

The allcaptures modifier requests that the values of all potential captured parentheses be output after a match. By default, only those up to the highest one actually used in the match are output (corresponding to the return code from pcre2_match()). Groups that did not take part in the match are output as "<unset>".


Testing callouts

A callout function is supplied when pcre2test calls the library matching functions, unless callout_none is specified. If callout_capture is set, the current captured groups are output when a callout occurs.

The callout_fail modifier can be given one or two numbers. If there is only one number, 1 is returned instead of 0 when a callout of that number is reached. If two numbers are given, 1 is returned when callout <n> is reached for the <m>th time.

The callout_data modifier can be given an unsigned or a negative number. Any value other than zero is used as a return from pcre2test's callout function.


Finding all matches in a string

Searching for all possible matches within a subject can be requested by the global or /altglobal modifier. After finding a match, the matching function is called again to search the remainder of the subject. The difference between global and altglobal is that the former uses the start_offset argument to pcre2_match() or pcre2_dfa_match() to start searching at a new point within the entire string (which is what Perl does), whereas the latter passes over a shortened subject. This makes a difference to the matching process if the pattern begins with a lookbehind assertion (including \b or \B).

If an empty string is matched, the next match is done with the PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED flags set, in order to search for another, non-empty, match at the same point in the subject. If this match fails, the start offset is advanced, and the normal match is retried. This imitates the way Perl handles such cases when using the /g modifier or the split() function. Normally, the start offset is advanced by one character, but if the newline convention recognizes CRLF as a newline, and the current character is CR followed by LF, an advance of two characters occurs.


Testing substring extraction functions

The copy and get modifiers can be used to test the pcre2_substring_copy_xxx() and pcre2_substring_get_xxx() functions. They can be given more than once, and each can specify a group name or number, for example:

   abcd\=copy=1,copy=3,get=G1
If the #subject command is used to set default copy and/or get lists, these can be unset by specifying a negative number to cancel all numbered groups and an empty name to cancel all named groups.

The getall modifier tests pcre2_substring_list_get(), which extracts all captured substrings.

If the subject line is successfully matched, the substrings extracted by the convenience functions are output with C, G, or L after the string number instead of a colon. This is in addition to the normal full list. The string length (that is, the return from the extraction function) is given in parentheses after each substring, followed by the name when the extraction was by name.


Testing the substitution function

If the replace modifier is set, the pcre2_substitute() function is called instead of one of the matching functions. Unlike subject strings, pcre2test does not process replacement strings for escape sequences. In UTF mode, a replacement string is checked to see if it is a valid UTF-8 string. If so, it is correctly converted to a UTF string of the appropriate code unit width. If it is not a valid UTF-8 string, the individual code units are copied directly. This provides a means of passing an invalid UTF-8 string for testing purposes.

If the global modifier is set, PCRE2_SUBSTITUTE_GLOBAL is passed to pcre2_substitute(). After a successful substitution, the modified string is output, preceded by the number of replacements. This may be zero if there were no matches. Here is a simple example of a substitution test:

  /abc/replace=xxx
      =abc=abc=
   1: =xxx=abc=
      =abc=abc=\=global
   2: =xxx=xxx=
Subject and replacement strings should be kept relatively short for substitution tests, as fixed-size buffers are used. To make it easy to test for buffer overflow, if the replacement string starts with a number in square brackets, that number is passed to pcre2_substitute() as the size of the output buffer, with the replacement string starting at the next character. Here is an example that tests the edge case:
  /abc/
      123abc123\=replace=[10]XYZ
   1: 123XYZ123
      123abc123\=replace=[9]XYZ
  Failed: error -47: no more memory
A replacement string is ignored with POSIX and DFA matching. Specifying partial matching provokes an error return ("bad option value") from pcre2_substitute().


Setting the JIT stack size

The jitstack modifier provides a way of setting the maximum stack size that is used by the just-in-time optimization code. It is ignored if JIT optimization is not being used. The value is a number of kilobytes. Providing a stack that is larger than the default 32K is necessary only for very complicated patterns.


Setting match and recursion limits

The match_limit and recursion_limit modifiers set the appropriate limits in the match context. These values are ignored when the find_limits modifier is specified.


Finding minimum limits

If the find_limits modifier is present, pcre2test calls pcre2_match() several times, setting different values in the match context via pcre2_set_match_limit() and pcre2_set_recursion_limit() until it finds the minimum values for each parameter that allow pcre2_match() to complete without error.

If JIT is being used, only the match limit is relevant. If DFA matching is being used, neither limit is relevant, and this modifier is ignored (with a warning message).

The match_limit number is a measure of the amount of backtracking that takes place, and learning the minimum value can be instructive. For most simple matches, the number is quite small, but for patterns with very large numbers of matching possibilities, it can become large very quickly with increasing length of subject string. The match_limit_recursion number is a measure of how much stack (or, if PCRE2 is compiled with NO_RECURSE, how much heap) memory is needed to complete the match attempt.


Showing MARK names

The mark modifier causes the names from backtracking control verbs that are returned from calls to pcre2_match() to be displayed. If a mark is returned for a match, non-match, or partial match, pcre2test shows it. For a match, it is on a line by itself, tagged with "MK:". Otherwise, it is added to the non-match message.


Showing memory usage

The memory modifier causes pcre2test to log all memory allocation and freeing calls that occur during a match operation.


Setting a starting offset

The offset modifier sets an offset in the subject string at which matching starts. Its value is a number of code units, not characters.


Setting the size of the output vector

The ovector modifier applies only to the subject line in which it appears, though of course it can also be used to set a default in a #subject command. It specifies the number of pairs of offsets that are available for storing matching information. The default is 15.

A value of zero is useful when testing the POSIX API because it causes regexec() to be called with a NULL capture vector. When not testing the POSIX API, a value of zero is used to cause pcre2_match_data_create_from_pattern() to be called, in order to create a match block of exactly the right size for the pattern. (It is not possible to create a match block with a zero-length ovector; there is always at least one pair of offsets.)


Passing the subject as zero-terminated

By default, the subject string is passed to a native API matching function with its correct length. In order to test the facility for passing a zero-terminated string, the zero_terminate modifier is provided. It causes the length to be passed as PCRE2_ZERO_TERMINATED. (When matching via the POSIX interface, this modifier has no effect, as there is no facility for passing a length.)

When testing pcre2_substitute(), this modifier also has the effect of passing the replacement string as zero-terminated.


THE ALTERNATIVE MATCHING FUNCTION

By default, pcre2test uses the standard PCRE2 matching function, pcre2_match() to match each subject line. PCRE2 also supports an alternative matching function, pcre2_dfa_match(), which operates in a different way, and has some restrictions. The differences between the two functions are described in the pcre2matching documentation.

If the dfa modifier is set, the alternative matching function is used. This function finds all possible matches at a given point in the subject. If, however, the dfa_shortest modifier is set, processing stops after the first match is found. This is always the shortest possible match.


DEFAULT OUTPUT FROM pcre2test

This section describes the output when the normal matching function, pcre2_match(), is being used.

When a match succeeds, pcre2test outputs the list of captured substrings, starting with number 0 for the string that matched the whole pattern. Otherwise, it outputs "No match" when the return is PCRE2_ERROR_NOMATCH, or "Partial match:" followed by the partially matching substring when the return is PCRE2_ERROR_PARTIAL. (Note that this is the entire substring that was inspected during the partial match; it may include characters before the actual match start if a lookbehind assertion, \K, \b, or \B was involved.)

For any other return, pcre2test outputs the PCRE2 negative error number and a short descriptive phrase. If the error is a failed UTF string check, the code unit offset of the start of the failing character is also output. Here is an example of an interactive pcre2test run.

  $ pcre2test
  PCRE2 version 9.00 2014-05-10

    re> /^abc(\d+)/
  data> abc123
   0: abc123
   1: 123
  data> xyz
  No match
Unset capturing substrings that are not followed by one that is set are not shown by pcre2test unless the allcaptures modifier is specified. In the following example, there are two capturing substrings, but when the first data line is matched, the second, unset substring is not shown. An "internal" unset substring is shown as "<unset>", as for the second data line.
    re> /(a)|(b)/
  data> a
   0: a
   1: a
  data> b
   0: b
   1: <unset>
   2: b
If the strings contain any non-printing characters, they are output as \xhh escapes if the value is less than 256 and UTF mode is not set. Otherwise they are output as \x{hh...} escapes. See below for the definition of non-printing characters. If the /aftertext modifier is set, the output for substring 0 is followed by the the rest of the subject string, identified by "0+" like this:
    re> /cat/aftertext
  data> cataract
   0: cat
   0+ aract
If global matching is requested, the results of successive matching attempts are output in sequence, like this:
    re> /\Bi(\w\w)/g
  data> Mississippi
   0: iss
   1: ss
   0: iss
   1: ss
   0: ipp
   1: pp
"No match" is output only if the first match attempt fails. Here is an example of a failure message (the offset 4 that is specified by the offset modifier is past the end of the subject string):
    re> /xyz/
  data> xyz\=offset=4
  Error -24 (bad offset value)

Note that whereas patterns can be continued over several lines (a plain ">" prompt is used for continuations), subject lines may not. However newlines can be included in a subject by means of the \n escape (or \r, \r\n, etc., depending on the newline sequence setting).


OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION

When the alternative matching function, pcre2_dfa_match(), is used, the output consists of a list of all the matches that start at the first point in the subject where there is at least one match. For example:

    re> /(tang|tangerine|tan)/
  data> yellow tangerine\=dfa
   0: tangerine
   1: tang
   2: tan
Using the normal matching function on this data finds only "tang". The longest matching string is always given first (and numbered zero). After a PCRE2_ERROR_PARTIAL return, the output is "Partial match:", followed by the partially matching substring. Note that this is the entire substring that was inspected during the partial match; it may include characters before the actual match start if a lookbehind assertion, \b, or \B was involved. (\K is not supported for DFA matching.)

If global matching is requested, the search for further matches resumes at the end of the longest match. For example:

    re> /(tang|tangerine|tan)/g
  data> yellow tangerine and tangy sultana\=dfa
   0: tangerine
   1: tang
   2: tan
   0: tang
   1: tan
   0: tan
The alternative matching function does not support substring capture, so the modifiers that are concerned with captured substrings are not relevant.


RESTARTING AFTER A PARTIAL MATCH

When the alternative matching function has given the PCRE2_ERROR_PARTIAL return, indicating that the subject partially matched the pattern, you can restart the match with additional subject data by means of the dfa_restart modifier. For example:

    re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
  data> 23ja\=P,dfa
  Partial match: 23ja
  data> n05\=dfa,dfa_restart
   0: n05
For further information about partial matching, see the pcre2partial documentation.


CALLOUTS

If the pattern contains any callout requests, pcre2test's callout function is called during matching. This works with both matching functions. By default, the called function displays the callout number, the start and current positions in the text at the callout time, and the next pattern item to be tested. For example:

  --->pqrabcdef
    0    ^  ^     \d
This output indicates that callout number 0 occurred for a match attempt starting at the fourth character of the subject string, when the pointer was at the seventh character, and when the next pattern item was \d. Just one circumflex is output if the start and current positions are the same.

Callouts numbered 255 are assumed to be automatic callouts, inserted as a result of the /auto_callout pattern modifier. In this case, instead of showing the callout number, the offset in the pattern, preceded by a plus, is output. For example:

    re> /\d?[A-E]\*/auto_callout
  data> E*
  --->E*
   +0 ^      \d?
   +3 ^      [A-E]
   +8 ^^     \*
  +10 ^ ^
   0: E*
If a pattern contains (*MARK) items, an additional line is output whenever a change of latest mark is passed to the callout function. For example:
    re> /a(*MARK:X)bc/auto_callout
  data> abc
  --->abc
   +0 ^       a
   +1 ^^      (*MARK:X)
  +10 ^^      b
  Latest Mark: X
  +11 ^ ^     c
  +12 ^  ^
   0: abc
The mark changes between matching "a" and "b", but stays the same for the rest of the match, so nothing more is output. If, as a result of backtracking, the mark reverts to being unset, the text "<unset>" is output.

The callout function in pcre2test returns zero (carry on matching) by default, but you can use a callout_fail modifier in a subject line (as described above) to change this and other parameters of the callout.

Inserting callouts can be helpful when using pcre2test to check complicated regular expressions. For further information about callouts, see the pcre2callout documentation.


NON-PRINTING CHARACTERS

When pcre2test is outputting text in the compiled version of a pattern, bytes other than 32-126 are always treated as non-printing characters and are therefore shown as hex escapes.

When pcre2test is outputting text that is a matched part of a subject string, it behaves in the same way, unless a different locale has been set for the pattern (using the /locale modifier). In this case, the isprint() function is used to distinguish printing and non-printing characters.


SEE ALSO

pcre2(3), pcre2api(3), pcre2callout(3), pcre2jit, pcre2matching(3), pcre2partial(d), pcre2pattern(3).


AUTHOR

Philip Hazel
University Computing Service
Cambridge, England.


REVISION

Last updated: 23 November 2014
Copyright © 1997-2014 University of Cambridge.

Return to the PCRE2 index page.