Return to the PCRE2 index page.
This page is part of the PCRE2 HTML documentation. It was generated
automatically from the original man page. If there is any nonsense in it,
please consult the man page, in case the conversion went wrong.
pcre2test [options] [input file [output file]]
pcre2test is a test program for the PCRE2 regular expression libraries,
but it can also be used for experimenting with regular expressions. This
document describes the features of the test program; for details of the regular
expressions themselves, see the
pcre2pattern
documentation. For details of the PCRE2 library function calls and their
options, see the
pcre2api
documentation.
The input for pcre2test is a sequence of regular expression patterns and subject strings to be matched. There are also command lines for setting defaults and controlling some special actions. The output shows the result of each match attempt. Modifiers on external or internal command lines, the patterns, and the subject lines specify PCRE2 function options, control how the subject is processed, and what output is produced.
As the original fairly simple PCRE library evolved, it acquired many different features, and as a result, the original pcretest program ended up with a lot of options in a messy, arcane syntax, for testing all the features. The move to the new PCRE2 API provided an opportunity to re-implement the test program as pcre2test, with a cleaner modifier syntax. Nevertheless, there are still many obscure modifiers, some of which are specifically designed for use in conjunction with the test script and data files that are distributed as part of PCRE2. All the modifiers are documented here, some without much justification, but many of them are unlikely to be of use except when testing the libraries.
Different versions of the PCRE2 library can be built to support character strings that are encoded in 8-bit, 16-bit, or 32-bit code units. One, two, or all three of these libraries may be simultaneously installed. The pcre2test program can be used to test all the libraries. However, its own input and output are always in 8-bit format. When testing the 16-bit or 32-bit libraries, patterns and subject strings are converted to 16- or 32-bit format before being passed to the library functions. Results are converted back to 8-bit code units for output.
In the rest of this document, the names of library functions and structures are given in generic form, for example, pcre_compile(). The actual names used in the libraries have a suffix _8, _16, or _32, as appropriate.
Input to pcre2test is processed line by line, either by calling the C library's fgets() function, or via the libreadline library (see below). The input is processed using using C's string functions, so must not contain binary zeroes, even though in Unix-like environments, fgets() treats any bytes other than newline as data characters. In some Windows environments character 26 (hex 1A) causes an immediate end of file, and no further data is read.
For maximum portability, therefore, it is safest to avoid non-printing characters in pcre2test input files. There is a facility for specifying a pattern's characters as hexadecimal pairs, thus making it possible to include binary zeroes in a pattern for testing purposes. Subject lines are processed for backslash escapes, which makes it possible to include any data value.
-8 If the 8-bit library has been built, this option causes it to be used (this is the default). If the 8-bit library has not been built, this option causes an error.
-16 If the 16-bit library has been built, this option causes it to be used. If only the 16-bit library has been built, this is the default. If the 16-bit library has not been built, this option causes an error.
-32 If the 32-bit library has been built, this option causes it to be used. If only the 32-bit library has been built, this is the default. If the 32-bit library has not been built, this option causes an error.
-b Behave as if each pattern has the /fullbincode modifier; the full internal binary form of the pattern is output after compilation.
-C Output the version number of the PCRE2 library, and all available information about the optional features that are included, and then exit with zero exit code. All other options are ignored.
-C option Output information about a specific build-time option, then exit. This functionality is intended for use in scripts such as RunTest. The following options output the value and set the exit code as indicated:
ebcdic-nl the code for LF (= NL) in an EBCDIC environment:
0x15 or 0x25
0 if used in an ASCII environment
exit code is always 0
linksize the configured internal link size (2, 3, or 4)
exit code is set to the link size
newline the default newline setting:
CR, LF, CRLF, ANYCRLF, or ANY
exit code is always 0
bsr the default setting for what \R matches:
ANYCRLF or ANY
exit code is always 0
The following options output 1 for true or 0 for false, and set the exit code
to the same value:
backslash-C \C is supported (not locked out) ebcdic compiled for an EBCDIC environment jit just-in-time support is available pcre2-16 the 16-bit library was built pcre2-32 the 32-bit library was built pcre2-8 the 8-bit library was built unicode Unicode support is availableIf an unknown option is given, an error message is output; the exit code is 0.
-d Behave as if each pattern has the debug modifier; the internal form and information about the compiled pattern is output after compilation; -d is equivalent to -b -i.
-dfa Behave as if each subject line has the dfa modifier; matching is done using the pcre2_dfa_match() function instead of the default pcre2_match().
-help Output a brief summary these options and then exit.
-i Behave as if each pattern has the /info modifier; information about the compiled pattern is given after compilation.
-jit Behave as if each pattern line has the jit modifier; after successful compilation, each pattern is passed to the just-in-time compiler, if available.
\fB-pattern\fB modifier-list Behave as if each pattern line contains the given modifiers.
-q Do not output the version number of pcre2test at the start of execution.
-S size On Unix-like systems, set the size of the run-time stack to size megabytes.
-subject modifier-list Behave as if each subject line contains the given modifiers.
-t Run each compile and match many times with a timer, and output the resulting times per compile or match. When JIT is used, separate times are given for the initial compile and the JIT compile. You can control the number of iterations that are used for timing by following -t with a number (as a separate item on the command line). For example, "-t 1000" iterates 1000 times. The default is to iterate 500,000 times.
-tm This is like -t except that it times only the matching phase, not the compile phase.
-T -TM These behave like -t and -tm, but in addition, at the end of a run, the total times for all compiles and matches are output.
-version Output the PCRE2 version number and then exit.
If pcre2test is given two filename arguments, it reads from the first and writes to the second. If the first name is "-", input is taken from the standard input. If pcre2test is given only one argument, it reads from that file and writes to stdout. Otherwise, it reads from stdin and writes to stdout.
When pcre2test is built, a configuration option can specify that it should be linked with the libreadline or libedit library. When this is done, if the input is from a terminal, it is read using the readline() function. This provides line-editing and history facilities. The output from the -help option states whether or not readline() will be used.
The program handles any number of tests, each of which consists of a set of input lines. Each set starts with a regular expression pattern, followed by any number of subject lines to be matched against that pattern. In between sets of test data, command lines that begin with # may appear. This file format, with some restrictions, can also be processed by the perltest.sh script that is distributed with PCRE2 as a means of checking that the behaviour of PCRE2 and Perl is the same.
When the input is a terminal, pcre2test prompts for each line of input, using "re>" to prompt for regular expression patterns, and "data>" to prompt for subject lines. Command lines starting with # can be entered only in response to the "re>" prompt.
Each subject line is matched separately and independently. If you want to do multi-line matches, you have to use the \n escape sequence (or \r or \r\n, etc., depending on the newline setting) in a single line of input to encode the newline sequences. There is no limit on the length of subject lines; the input buffer is automatically extended if it is too small. There are replication features that makes it possible to generate long repetitive pattern or subject lines without having to supply them explicitly.
An empty line or the end of the file signals the end of the subject lines for a test, at which point a new pattern or command line is expected if there is still input to be read.
In between sets of test data, a line that begins with # is interpreted as a command line. If the first character is followed by white space or an exclamation mark, the line is treated as a comment, and ignored. Otherwise, the following commands are recognized:
#forbid_utfSubsequent patterns automatically have the PCRE2_NEVER_UTF and PCRE2_NEVER_UCP options set, which locks out the use of the PCRE2_UTF and PCRE2_UCP options and the use of (*UTF) and (*UCP) at the start of patterns. This command also forces an error if a subsequent pattern contains any occurrences of \P, \p, or \X, which are still supported when PCRE2_UTF is not set, but which require Unicode property support to be included in the library.
This is a trigger guard that is used in test files to ensure that UTF or Unicode property tests are not accidentally added to files that are used when Unicode support is not included in the library. Setting PCRE2_NEVER_UTF and PCRE2_NEVER_UCP as a default can also be obtained by the use of #pattern; the difference is that #forbid_utf cannot be unset, and the automatic options are not displayed in pattern information, to avoid cluttering up test output.
#load <filename>This command is used to load a set of precompiled patterns from a file, as described in the section entitled "Saving and restoring compiled patterns" below.
#newline_default [<newline-list>]When PCRE2 is built, a default newline convention can be specified. This determines which characters and/or character pairs are recognized as indicating a newline in a pattern or subject string. The default can be overridden when a pattern is compiled. The standard test files contain tests of various newline conventions, but the majority of the tests expect a single linefeed to be recognized as a newline by default. Without special action the tests would fail when PCRE2 is compiled with either CR or CRLF as the default newline.
The #newline_default command specifies a list of newline types that are acceptable as the default. The types must be one of CR, LF, CRLF, ANYCRLF, or ANY (in upper or lower case), for example:
#newline_default LF Any anyCRLFIf the default newline is in the list, this command has no effect. Otherwise, except when testing the POSIX API, a newline modifier that specifies the first newline convention in the list (LF in the above example) is added to any pattern that does not already have a newline modifier. If the newline list is empty, the feature is turned off. This command is present in a number of the standard test input files.
When the POSIX API is being tested there is no way to override the default newline convention, though it is possible to set the newline convention from within the pattern. A warning is given if the posix modifier is used when #newline_default would set a default for the non-POSIX API.
#pattern <modifier-list>This command sets a default modifier list that applies to all subsequent patterns. Modifiers on a pattern can change these settings.
#perltestThe appearance of this line causes all subsequent modifier settings to be checked for compatibility with the perltest.sh script, which is used to confirm that Perl gives the same results as PCRE2. Also, apart from comment lines, none of the other command lines are permitted, because they and many of the modifiers are specific to pcre2test, and should not be used in test files that are also processed by perltest.sh. The #perltest command helps detect tests that are accidentally put in the wrong file.
#pop [<modifiers>]This command is used to manipulate the stack of compiled patterns, as described in the section entitled "Saving and restoring compiled patterns" below.
#save <filename>This command is used to save a set of compiled patterns to a file, as described in the section entitled "Saving and restoring compiled patterns" below.
#subject <modifier-list>This command sets a default modifier list that applies to all subsequent subject lines. Modifiers on a subject line can change these settings.
Modifier lists are used with both pattern and subject lines. Items in a list are separated by commas followed by optional white space. Trailing whitespace in a modifier list is ignored. Some modifiers may be given for both patterns and subject lines, whereas others are valid only for one or the other. Each modifier has a long name, for example "anchored", and some of them must be followed by an equals sign and a value, for example, "offset=12". Values cannot contain comma characters, but may contain spaces. Modifiers that do not take values may be preceded by a minus sign to turn off a previous setting.
A few of the more common modifiers can also be specified as single letters, for example "i" for "caseless". In documentation, following the Perl convention, these are written with a slash ("the /i modifier") for clarity. Abbreviated modifiers must all be concatenated in the first item of a modifier list. If the first item is not recognized as a long modifier name, it is interpreted as a sequence of these abbreviations. For example:
/abc/ig,newline=cr,jit=3This is a pattern line whose modifier list starts with two one-letter modifiers (/i and /g). The lower-case abbreviated modifiers are the same as used in Perl.
A pattern line must start with one of the following characters (common symbols, excluding pattern meta-characters):
/ ! " ' ` - = _ : ; , % & @ ~This is interpreted as the pattern's delimiter. A regular expression may be continued over several input lines, in which case the newline characters are included within it. It is possible to include the delimiter within the pattern by escaping it with a backslash, for example
/abc\/def/If you do this, the escape and the delimiter form part of the pattern, but since the delimiters are all non-alphanumeric, this does not affect its interpretation. If the terminating delimiter is immediately followed by a backslash, for example,
/abc/\then a backslash is added to the end of the pattern. This is done to provide a way of testing the error condition that arises if a pattern finishes with a backslash, because
/abc\/is interpreted as the first line of a pattern that starts with "abc/", causing pcre2test to read the next line as a continuation of the regular expression.
A pattern can be followed by a modifier list (details below).
Before each subject line is passed to pcre2_match() or pcre2_dfa_match(), leading and trailing white space is removed, and the line is scanned for backslash escapes. The following provide a means of encoding non-printing characters in a visible way:
\a alarm (BEL, \x07)
\b backspace (\x08)
\e escape (\x27)
\f form feed (\x0c)
\n newline (\x0a)
\r carriage return (\x0d)
\t tab (\x09)
\v vertical tab (\x0b)
\nnn octal character (up to 3 octal digits); always
a byte unless > 255 in UTF-8 or 16-bit or 32-bit mode
\o{dd...} octal character (any number of octal digits}
\xhh hexadecimal byte (up to 2 hex digits)
\x{hh...} hexadecimal character (any number of hex digits)
The use of \x{hh...} is not dependent on the use of the utf modifier on
the pattern. It is recognized always. There may be any number of hexadecimal
digits inside the braces; invalid values provoke error messages.
Note that \xhh specifies one byte rather than one character in UTF-8 mode; this makes it possible to construct invalid UTF-8 sequences for testing purposes. On the other hand, \x{hh} is interpreted as a UTF-8 character in UTF-8 mode, generating more than one byte if the value is greater than 127. When testing the 8-bit library not in UTF-8 mode, \x{hh} generates one byte for values less than 256, and causes an error for greater values.
In UTF-16 mode, all 4-digit \x{hhhh} values are accepted. This makes it possible to construct invalid UTF-16 sequences for testing purposes.
In UTF-32 mode, all 4- to 8-digit \x{...} values are accepted. This makes it possible to construct invalid UTF-32 sequences for testing purposes.
There is a special backslash sequence that specifies replication of one or more characters:
\[<characters>]{<count>}
This makes it possible to test long strings without having to provide them as
part of the file. For example:
\[abc]{4}
is converted to "abcabcabcabc". This feature does not support nesting. To
include a closing square bracket in the characters, code it as \x5D.
A backslash followed by an equals sign marks the end of the subject string and the start of a modifier list. For example:
abc\=notbol,notemptyIf the subject string is empty and \= is followed by whitespace, the line is treated as a comment line, and is not used for matching. For example:
\= This is a comment. abc\= This is an invalid modifier list.A backslash followed by any other non-alphanumeric character just escapes that character. A backslash followed by anything else causes an error. However, if the very last character in the line is a backslash (and there is no modifier list), it is ignored. This gives a way of passing an empty line as data, since a real empty line terminates the data input.
There are several types of modifier that can appear in pattern lines. Except where noted below, they may also be used in #pattern commands. A pattern's modifier list can add to or override default modifiers that were set by a previous #pattern command.
The following modifiers set options for pcre2_compile(). The most common ones have single-letter abbreviations. See pcre2api for a description of their effects.
allow_empty_class set PCRE2_ALLOW_EMPTY_CLASS
alt_bsux set PCRE2_ALT_BSUX
alt_circumflex set PCRE2_ALT_CIRCUMFLEX
alt_verbnames set PCRE2_ALT_VERBNAMES
anchored set PCRE2_ANCHORED
auto_callout set PCRE2_AUTO_CALLOUT
/i caseless set PCRE2_CASELESS
dollar_endonly set PCRE2_DOLLAR_ENDONLY
/s dotall set PCRE2_DOTALL
dupnames set PCRE2_DUPNAMES
/x extended set PCRE2_EXTENDED
firstline set PCRE2_FIRSTLINE
match_unset_backref set PCRE2_MATCH_UNSET_BACKREF
/m multiline set PCRE2_MULTILINE
never_backslash_c set PCRE2_NEVER_BACKSLASH_C
never_ucp set PCRE2_NEVER_UCP
never_utf set PCRE2_NEVER_UTF
no_auto_capture set PCRE2_NO_AUTO_CAPTURE
no_auto_possess set PCRE2_NO_AUTO_POSSESS
no_dotstar_anchor set PCRE2_NO_DOTSTAR_ANCHOR
no_start_optimize set PCRE2_NO_START_OPTIMIZE
no_utf_check set PCRE2_NO_UTF_CHECK
ucp set PCRE2_UCP
ungreedy set PCRE2_UNGREEDY
use_offset_limit set PCRE2_USE_OFFSET_LIMIT
utf set PCRE2_UTF
As well as turning on the PCRE2_UTF option, the utf modifier causes all
non-printing characters in output strings to be printed using the \x{hh...}
notation. Otherwise, those less than 0x100 are output in hex without the curly
brackets.
The following modifiers affect the compilation process or request information about the pattern:
bsr=[anycrlf|unicode] specify \R handling
/B bincode show binary code without lengths
callout_info show callout information
debug same as info,fullbincode
fullbincode show binary code with lengths
/I info show info about compiled pattern
hex pattern is coded in hexadecimal
jit[=<number>] use JIT
jitfast use JIT fast path
jitverify verify JIT use
locale=<name> use this locale
max_pattern_length=<n> set the maximum pattern length
memory show memory used
newline=<type> set newline type
null_context compile with a NULL context
parens_nest_limit=<n> set maximum parentheses depth
posix use the POSIX API
push push compiled pattern onto the stack
stackguard=<number> test the stackguard feature
tables=[0|1|2] select internal tables
The effects of these modifiers are described in the following sections.
The bsr modifier specifies what \R in a pattern should match. If it is set to "anycrlf", \R matches CR, LF, or CRLF only. If it is set to "unicode", \R matches any Unicode newline sequence. The default is specified when PCRE2 is built, with the default default being Unicode.
The newline modifier specifies which characters are to be interpreted as newlines, both in the pattern and in subject lines. The type must be one of CR, LF, CRLF, ANYCRLF, or ANY (in upper or lower case).
The debug modifier is a shorthand for info,fullbincode, requesting all available information.
The bincode modifier causes a representation of the compiled code to be output after compilation. This information does not contain length and offset values, which ensures that the same output is generated for different internal link sizes and different code unit widths. By using bincode, the same regression tests can be used in different environments.
The fullbincode modifier, by contrast, does include length and offset values. This is used in a few special tests that run only for specific code unit widths and link sizes, and is also useful for one-off tests.
The info modifier requests information about the compiled pattern (whether it is anchored, has a fixed first character, and so on). The information is obtained from the pcre2_pattern_info() function. Here are some typical examples:
re> /(?i)(^a|^b)/m,info
Capturing subpattern count = 1
Compile options: multiline
Overall options: caseless multiline
First code unit at start or follows newline
Subject length lower bound = 1
re> /(?i)abc/info
Capturing subpattern count = 0
Compile options: <none>
Overall options: caseless
First code unit = 'a' (caseless)
Last code unit = 'c' (caseless)
Subject length lower bound = 3
"Compile options" are those specified by modifiers; "overall options" have
added options that are taken or deduced from the pattern. If both sets of
options are the same, just a single "options" line is output; if there are no
options, the line is omitted. "First code unit" is where any match must start;
if there is more than one they are listed as "starting code units". "Last code
unit" is the last literal code unit that must be present in any match. This is
not necessarily the last character. These lines are omitted if no starting or
ending code units are recorded.
The callout_info modifier requests information about all the callouts in the pattern. A list of them is output at the end of any other information that is requested. For each callout, either its number or string is given, followed by the item that follows it in the pattern.
Normally, pcre2test passes a context block to pcre2_compile(). If the null_context modifier is set, however, NULL is passed. This is for testing that pcre2_compile() behaves correctly in this case (it uses default values).
The hex modifier specifies that the characters of the pattern are to be interpreted as pairs of hexadecimal digits. White space is permitted between pairs. For example:
/ab 32 59/hexThis feature is provided as a way of creating patterns that contain binary zero and other non-printing characters. By default, pcre2test passes patterns as zero-terminated strings to pcre2_compile(), giving the length as PCRE2_ZERO_TERMINATED. However, for patterns specified in hexadecimal, the actual length of the pattern is passed.
Some tests use long patterns that are very repetitive. Instead of creating a very long input line for such a pattern, you can use a special repetition feature, similar to the one described for subject lines above. If the expand modifier is present on a pattern, parts of the pattern that have the form
\[<characters>]{<count>}
are expanded before the pattern is passed to pcre2_compile(). For
example, \[AB]{6000} is expanded to "ABAB..." 6000 times. This construction
cannot be nested. An initial "\[" sequence is recognized only if "]{" followed
by decimal digits and "}" is found later in the pattern. If not, the characters
remain in the pattern unaltered.
If part of an expanded pattern looks like an expansion, but is really part of the actual pattern, unwanted expansion can be avoided by giving two values in the quantifier. For example, \[AB]{6000,6000} is not recognized as an expansion item.
If the info modifier is set on an expanded pattern, the result of the expansion is included in the information that is output.
Just-in-time (JIT) compiling is a heavyweight optimization that can greatly speed up pattern matching. See the pcre2jit documentation for details. JIT compiling happens, optionally, after a pattern has been successfully compiled into an internal form. The JIT compiler converts this to optimized machine code. It needs to know whether the match-time options PCRE2_PARTIAL_HARD and PCRE2_PARTIAL_SOFT are going to be used, because different code is generated for the different cases. See the partial modifier in "Subject Modifiers" below for details of how these options are specified for each match attempt.
JIT compilation is requested by the /jit pattern modifier, which may optionally be followed by an equals sign and a number in the range 0 to 7. The three bits that make up the number specify which of the three JIT operating modes are to be compiled:
1 compile JIT code for non-partial matching 2 compile JIT code for soft partial matching 4 compile JIT code for hard partial matchingThe possible values for the /jit modifier are therefore:
0 disable JIT 1 normal matching only 2 soft partial matching only 3 normal and soft partial matching 4 hard partial matching only 6 soft and hard partial matching only 7 all three modesIf no number is given, 7 is assumed. The phrase "partial matching" means a call to pcre2_match() with either the PCRE2_PARTIAL_SOFT or the PCRE2_PARTIAL_HARD option set. Note that such a call may return a complete match; the options enable the possibility of a partial match, but do not require it. Note also that if you request JIT compilation only for partial matching (for example, /jit=2) but do not set the partial modifier on a subject line, that match will not use JIT code because none was compiled for non-partial matching.
If JIT compilation is successful, the compiled JIT code will automatically be used when an appropriate type of match is run, except when incompatible run-time options are specified. For more details, see the pcre2jit documentation. See also the jitstack modifier below for a way of setting the size of the JIT stack.
If the jitfast modifier is specified, matching is done using the JIT "fast path" interface, pcre2_jit_match(), which skips some of the sanity checks that are done by pcre2_match(), and of course does not work when JIT is not supported. If jitfast is specified without jit, jit=7 is assumed.
If the jitverify modifier is specified, information about the compiled pattern shows whether JIT compilation was or was not successful. If jitverify is specified without jit, jit=7 is assumed. If JIT compilation is successful when jitverify is set, the text "(JIT)" is added to the first output line after a match or non match when JIT-compiled code was actually used in the match.
The /locale modifier must specify the name of a locale, for example:
/pattern/locale=fr_FRThe given locale is set, pcre2_maketables() is called to build a set of character tables for the locale, and this is then passed to pcre2_compile() when compiling the regular expression. The same tables are used when matching the following subject lines. The /locale modifier applies only to the pattern on which it appears, but can be given in a #pattern command if a default is needed. Setting a locale and alternate character tables are mutually exclusive.
The /memory modifier causes the size in bytes of the memory used to hold the compiled pattern to be output. This does not include the size of the pcre2_code block; it is just the actual compiled data. If the pattern is subsequently passed to the JIT compiler, the size of the JIT compiled code is also output. Here is an example:
re> /a(b)c/jit,memory
Memory allocation (code space): 21
Memory allocation (JIT code): 1910
The parens_nest_limit modifier sets a limit on the depth of nested parentheses in a pattern. Breaching the limit causes a compilation error. The default for the library is set when PCRE2 is built, but pcre2test sets its own default of 220, which is required for running the standard test suite.
The max_pattern_length modifier sets a limit, in code units, to the length of pattern that pcre2_compile() will accept. Breaching the limit causes a compilation error. The default is the largest number a PCRE2_SIZE variable can hold (essentially unlimited).
The /posix modifier causes pcre2test to call PCRE2 via the POSIX wrapper API rather than its native API. This supports only the 8-bit library. Note that it does not imply POSIX matching semantics; for more detail see the pcre2posix documentation. When the POSIX API is being used, the following pattern modifiers set options for the regcomp() function:
caseless REG_ICASE multiline REG_NEWLINE no_auto_capture REG_NOSUB dotall REG_DOTALL ) ungreedy REG_UNGREEDY ) These options are not part of ucp REG_UCP ) the POSIX standard utf REG_UTF8 )The regerror_buffsize modifier specifies a size for the error buffer that is passed to regerror() in the event of a compilation error. For example:
/abc/posix,regerror_buffsize=20This provides a means of testing the behaviour of regerror() when the buffer is too small for the error message. If this modifier has not been set, a large buffer is used.
The aftertext and allaftertext subject modifiers work as described below. All other modifiers cause an error.
The /stackguard modifier is used to test the use of pcre2_set_compile_recursion_guard(), a function that is provided to enable stack availability to be checked during compilation (see the pcre2api documentation for details). If the number specified by the modifier is greater than zero, pcre2_set_compile_recursion_guard() is called to set up callback from pcre2_compile() to a local function. The argument it receives is the current nesting parenthesis depth; if this is greater than the value given by the modifier, non-zero is returned, causing the compilation to be aborted.
The value specified for the /tables modifier must be one of the digits 0, 1, or 2. It causes a specific set of built-in character tables to be passed to pcre2_compile(). This is used in the PCRE2 tests to check behaviour with different character tables. The digit specifies the tables as follows:
0 do not pass any special character tables
1 the default ASCII tables, as distributed in
pcre2_chartables.c.dist
2 a set of tables defining ISO 8859 characters
In table 2, some characters whose codes are greater than 128 are identified as
letters, digits, spaces, etc. Setting alternate character tables and a locale
are mutually exclusive.
The following modifiers are really subject modifiers, and are described below. However, they may be included in a pattern's modifier list, in which case they are applied to every subject line that is processed with that pattern. They may not appear in #pattern commands. These modifiers do not affect the compilation process.
aftertext show text after match
allaftertext show text after captures
allcaptures show all captures
allusedtext show all consulted text
/g global global matching
mark show mark values
replace=<string> specify a replacement string
startchar show starting character when relevant
substitute_extended use PCRE2_SUBSTITUTE_EXTENDED
substitute_overflow_length use PCRE2_SUBSTITUTE_OVERFLOW_LENGTH
substitute_unknown_unset use PCRE2_SUBSTITUTE_UNKNOWN_UNSET
substitute_unset_empty use PCRE2_SUBSTITUTE_UNSET_EMPTY
These modifiers may not appear in a #pattern command. If you want them as
defaults, set them in a #subject command.
When a pattern with the push modifier is successfully compiled, it is pushed onto a stack of compiled patterns, and pcre2test expects the next line to contain a new pattern (or a command) instead of a subject line. This facility is used when saving compiled patterns to a file, as described in the section entitled "Saving and restoring compiled patterns" below. The push modifier is incompatible with compilation modifiers such as global that act at match time. Any that are specified are ignored, with a warning message, except for replace, which causes an error. Note that, jitverify, which is allowed, does not carry through to any subsequent matching that uses this pattern.
The modifiers that can appear in subject lines and the #subject command are of two types.
The following modifiers set options for pcre2_match() or pcre2_dfa_match(). See pcreapi for a description of their effects.
anchored set PCRE2_ANCHORED
dfa_restart set PCRE2_DFA_RESTART
dfa_shortest set PCRE2_DFA_SHORTEST
no_utf_check set PCRE2_NO_UTF_CHECK
notbol set PCRE2_NOTBOL
notempty set PCRE2_NOTEMPTY
notempty_atstart set PCRE2_NOTEMPTY_ATSTART
noteol set PCRE2_NOTEOL
partial_hard (or ph) set PCRE2_PARTIAL_HARD
partial_soft (or ps) set PCRE2_PARTIAL_SOFT
The partial matching modifiers are provided with abbreviations because they
appear frequently in tests.
If the /posix modifier was present on the pattern, causing the POSIX wrapper API to be used, the only option-setting modifiers that have any effect are notbol, notempty, and noteol, causing REG_NOTBOL, REG_NOTEMPTY, and REG_NOTEOL, respectively, to be passed to regexec(). Any other modifiers cause an error.
The following modifiers affect the matching process or request additional information. Some of them may also be specified on a pattern line (see above), in which case they apply to every subject line that is matched against that pattern.
aftertext show text after match
allaftertext show text after captures
allcaptures show all captures
allusedtext show all consulted text (non-JIT only)
altglobal alternative global matching
callout_capture show captures at callout time
callout_data=<n> set a value to pass via callouts
callout_fail=<n>[:<m>] control callout failure
callout_none do not supply a callout function
copy=<number or name> copy captured substring
dfa use pcre2_dfa_match()
find_limits find match and recursion limits
get=<number or name> extract captured substring
getall extract all captured substrings
/g global global matching
jitstack=<n> set size of JIT stack
mark show mark values
match_limit=<n> set a match limit
memory show memory usage
null_context match with a NULL context
offset=<n> set starting offset
offset_limit=<n> set offset limit
ovector=<n> set size of output vector
recursion_limit=<n> set a recursion limit
replace=<string> specify a replacement string
startchar show startchar when relevant
startoffset=<n> same as offset=<n>
substitute_extedded use PCRE2_SUBSTITUTE_EXTENDED
substitute_overflow_length use PCRE2_SUBSTITUTE_OVERFLOW_LENGTH
substitute_unknown_unset use PCRE2_SUBSTITUTE_UNKNOWN_UNSET
substitute_unset_empty use PCRE2_SUBSTITUTE_UNSET_EMPTY
zero_terminate pass the subject as zero-terminated
The effects of these modifiers are described in the following sections.
The aftertext modifier requests that as well as outputting the part of the subject string that matched the entire pattern, pcre2test should in addition output the remainder of the subject string. This is useful for tests where the subject contains multiple copies of the same substring. The allaftertext modifier requests the same action for captured substrings as well as the main matched substring. In each case the remainder is output on the following line with a plus character following the capture number.
The allusedtext modifier requests that all the text that was consulted during a successful pattern match by the interpreter should be shown. This feature is not supported for JIT matching, and if requested with JIT it is ignored (with a warning message). Setting this modifier affects the output if there is a lookbehind at the start of a match, or a lookahead at the end, or if \K is used in the pattern. Characters that precede or follow the start and end of the actual match are indicated in the output by '<' or '>' characters underneath them. Here is an example:
re> /(?<=pqr)abc(?=xyz)/
data> 123pqrabcxyz456\=allusedtext
0: pqrabcxyz
<<< >>>
This shows that the matched string is "abc", with the preceding and following
strings "pqr" and "xyz" having been consulted during the match (when processing
the assertions).
The startchar modifier requests that the starting character for the match be indicated, if it is different to the start of the matched string. The only time when this occurs is when \K has been processed as part of the match. In this situation, the output for the matched string is displayed from the starting character instead of from the match point, with circumflex characters under the earlier characters. For example:
re> /abc\Kxyz/
data> abcxyz\=startchar
0: abcxyz
^^^
Unlike allusedtext, the startchar modifier can be used with JIT.
However, these two modifiers are mutually exclusive.
The allcaptures modifier requests that the values of all potential captured parentheses be output after a match. By default, only those up to the highest one actually used in the match are output (corresponding to the return code from pcre2_match()). Groups that did not take part in the match are output as "<unset>".
A callout function is supplied when pcre2test calls the library matching functions, unless callout_none is specified. If callout_capture is set, the current captured groups are output when a callout occurs.
The callout_fail modifier can be given one or two numbers. If there is only one number, 1 is returned instead of 0 when a callout of that number is reached. If two numbers are given, 1 is returned when callout <n> is reached for the <m>th time. Note that callouts with string arguments are always given the number zero. See "Callouts" below for a description of the output when a callout it taken.
The callout_data modifier can be given an unsigned or a negative number. This is set as the "user data" that is passed to the matching function, and passed back when the callout function is invoked. Any value other than zero is used as a return from pcre2test's callout function.
Searching for all possible matches within a subject can be requested by the global or /altglobal modifier. After finding a match, the matching function is called again to search the remainder of the subject. The difference between global and altglobal is that the former uses the start_offset argument to pcre2_match() or pcre2_dfa_match() to start searching at a new point within the entire string (which is what Perl does), whereas the latter passes over a shortened subject. This makes a difference to the matching process if the pattern begins with a lookbehind assertion (including \b or \B).
If an empty string is matched, the next match is done with the PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED flags set, in order to search for another, non-empty, match at the same point in the subject. If this match fails, the start offset is advanced, and the normal match is retried. This imitates the way Perl handles such cases when using the /g modifier or the split() function. Normally, the start offset is advanced by one character, but if the newline convention recognizes CRLF as a newline, and the current character is CR followed by LF, an advance of two characters occurs.
The copy and get modifiers can be used to test the pcre2_substring_copy_xxx() and pcre2_substring_get_xxx() functions. They can be given more than once, and each can specify a group name or number, for example:
abcd\=copy=1,copy=3,get=G1If the #subject command is used to set default copy and/or get lists, these can be unset by specifying a negative number to cancel all numbered groups and an empty name to cancel all named groups.
The getall modifier tests pcre2_substring_list_get(), which extracts all captured substrings.
If the subject line is successfully matched, the substrings extracted by the convenience functions are output with C, G, or L after the string number instead of a colon. This is in addition to the normal full list. The string length (that is, the return from the extraction function) is given in parentheses after each substring, followed by the name when the extraction was by name.
If the replace modifier is set, the pcre2_substitute() function is called instead of one of the matching functions. Note that replacement strings cannot contain commas, because a comma signifies the end of a modifier. This is not thought to be an issue in a test program.
Unlike subject strings, pcre2test does not process replacement strings for escape sequences. In UTF mode, a replacement string is checked to see if it is a valid UTF-8 string. If so, it is correctly converted to a UTF string of the appropriate code unit width. If it is not a valid UTF-8 string, the individual code units are copied directly. This provides a means of passing an invalid UTF-8 string for testing purposes.
The following modifiers set options (in additional to the normal match options) for pcre2_substitute():
global PCRE2_SUBSTITUTE_GLOBAL substitute_extended PCRE2_SUBSTITUTE_EXTENDED substitute_overflow_length PCRE2_SUBSTITUTE_OVERFLOW_LENGTH substitute_unknown_unset PCRE2_SUBSTITUTE_UNKNOWN_UNSET substitute_unset_empty PCRE2_SUBSTITUTE_UNSET_EMPTY
After a successful substitution, the modified string is output, preceded by the number of replacements. This may be zero if there were no matches. Here is a simple example of a substitution test:
/abc/replace=xxx
=abc=abc=
1: =xxx=abc=
=abc=abc=\=global
2: =xxx=xxx=
Subject and replacement strings should be kept relatively short (fewer than 256
characters) for substitution tests, as fixed-size buffers are used. To make it
easy to test for buffer overflow, if the replacement string starts with a
number in square brackets, that number is passed to pcre2_substitute() as
the size of the output buffer, with the replacement string starting at the next
character. Here is an example that tests the edge case:
/abc/
123abc123\=replace=[10]XYZ
1: 123XYZ123
123abc123\=replace=[9]XYZ
Failed: error -47: no more memory
The default action of pcre2_substitute() is to return
PCRE2_ERROR_NOMEMORY when the output buffer is too small. However, if the
PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option is set (by using the
substitute_overflow_length modifier), pcre2_substitute() continues
to go through the motions of matching and substituting, in order to compute the
size of buffer that is required. When this happens, pcre2test shows the
required buffer length (which includes space for the trailing zero) as part of
the error message. For example:
/abc/substitute_overflow_length
123abc123\=replace=[9]XYZ
Failed: error -47: no more memory: 10 code units are needed
A replacement string is ignored with POSIX and DFA matching. Specifying partial
matching provokes an error return ("bad option value") from
pcre2_substitute().
The jitstack modifier provides a way of setting the maximum stack size that is used by the just-in-time optimization code. It is ignored if JIT optimization is not being used. The value is a number of kilobytes. Providing a stack that is larger than the default 32K is necessary only for very complicated patterns.
The match_limit and recursion_limit modifiers set the appropriate limits in the match context. These values are ignored when the find_limits modifier is specified.
If the find_limits modifier is present, pcre2test calls pcre2_match() several times, setting different values in the match context via pcre2_set_match_limit() and pcre2_set_recursion_limit() until it finds the minimum values for each parameter that allow pcre2_match() to complete without error.
If JIT is being used, only the match limit is relevant. If DFA matching is being used, neither limit is relevant, and this modifier is ignored (with a warning message).
The match_limit number is a measure of the amount of backtracking that takes place, and learning the minimum value can be instructive. For most simple matches, the number is quite small, but for patterns with very large numbers of matching possibilities, it can become large very quickly with increasing length of subject string. The match_limit_recursion number is a measure of how much stack (or, if PCRE2 is compiled with NO_RECURSE, how much heap) memory is needed to complete the match attempt.
The mark modifier causes the names from backtracking control verbs that are returned from calls to pcre2_match() to be displayed. If a mark is returned for a match, non-match, or partial match, pcre2test shows it. For a match, it is on a line by itself, tagged with "MK:". Otherwise, it is added to the non-match message.
The memory modifier causes pcre2test to log all memory allocation and freeing calls that occur during a match operation.
The offset modifier sets an offset in the subject string at which matching starts. Its value is a number of code units, not characters.
The offset_limit modifier sets a limit for unanchored matches. If a match cannot be found starting at or before this offset in the subject, a "no match" return is given. The data value is a number of code units, not characters. When this modifier is used, the use_offset_limit modifier must have been set for the pattern; if not, an error is generated.
The ovector modifier applies only to the subject line in which it appears, though of course it can also be used to set a default in a #subject command. It specifies the number of pairs of offsets that are available for storing matching information. The default is 15.
A value of zero is useful when testing the POSIX API because it causes regexec() to be called with a NULL capture vector. When not testing the POSIX API, a value of zero is used to cause pcre2_match_data_create_from_pattern() to be called, in order to create a match block of exactly the right size for the pattern. (It is not possible to create a match block with a zero-length ovector; there is always at least one pair of offsets.)
By default, the subject string is passed to a native API matching function with its correct length. In order to test the facility for passing a zero-terminated string, the zero_terminate modifier is provided. It causes the length to be passed as PCRE2_ZERO_TERMINATED. (When matching via the POSIX interface, this modifier has no effect, as there is no facility for passing a length.)
When testing pcre2_substitute(), this modifier also has the effect of passing the replacement string as zero-terminated.
Normally, pcre2test passes a context block to pcre2_match(), pcre2_dfa_match() or pcre2_jit_match(). If the null_context modifier is set, however, NULL is passed. This is for testing that the matching functions behave correctly in this case (they use default values). This modifier cannot be used with the find_limits modifier or when testing the substitution function.
By default, pcre2test uses the standard PCRE2 matching function, pcre2_match() to match each subject line. PCRE2 also supports an alternative matching function, pcre2_dfa_match(), which operates in a different way, and has some restrictions. The differences between the two functions are described in the pcre2matching documentation.
If the dfa modifier is set, the alternative matching function is used. This function finds all possible matches at a given point in the subject. If, however, the dfa_shortest modifier is set, processing stops after the first match is found. This is always the shortest possible match.
This section describes the output when the normal matching function, pcre2_match(), is being used.
When a match succeeds, pcre2test outputs the list of captured substrings, starting with number 0 for the string that matched the whole pattern. Otherwise, it outputs "No match" when the return is PCRE2_ERROR_NOMATCH, or "Partial match:" followed by the partially matching substring when the return is PCRE2_ERROR_PARTIAL. (Note that this is the entire substring that was inspected during the partial match; it may include characters before the actual match start if a lookbehind assertion, \K, \b, or \B was involved.)
For any other return, pcre2test outputs the PCRE2 negative error number and a short descriptive phrase. If the error is a failed UTF string check, the code unit offset of the start of the failing character is also output. Here is an example of an interactive pcre2test run.
$ pcre2test
PCRE2 version 9.00 2014-05-10
re> /^abc(\d+)/
data> abc123
0: abc123
1: 123
data> xyz
No match
Unset capturing substrings that are not followed by one that is set are not
shown by pcre2test unless the allcaptures modifier is specified. In
the following example, there are two capturing substrings, but when the first
data line is matched, the second, unset substring is not shown. An "internal"
unset substring is shown as "<unset>", as for the second data line.
re> /(a)|(b)/
data> a
0: a
1: a
data> b
0: b
1: <unset>
2: b
If the strings contain any non-printing characters, they are output as \xhh
escapes if the value is less than 256 and UTF mode is not set. Otherwise they
are output as \x{hh...} escapes. See below for the definition of non-printing
characters. If the /aftertext modifier is set, the output for substring
0 is followed by the the rest of the subject string, identified by "0+" like
this:
re> /cat/aftertext
data> cataract
0: cat
0+ aract
If global matching is requested, the results of successive matching attempts
are output in sequence, like this:
re> /\Bi(\w\w)/g
data> Mississippi
0: iss
1: ss
0: iss
1: ss
0: ipp
1: pp
"No match" is output only if the first match attempt fails. Here is an example
of a failure message (the offset 4 that is specified by the offset
modifier is past the end of the subject string):
re> /xyz/
data> xyz\=offset=4
Error -24 (bad offset value)
Note that whereas patterns can be continued over several lines (a plain ">" prompt is used for continuations), subject lines may not. However newlines can be included in a subject by means of the \n escape (or \r, \r\n, etc., depending on the newline sequence setting).
When the alternative matching function, pcre2_dfa_match(), is used, the output consists of a list of all the matches that start at the first point in the subject where there is at least one match. For example:
re> /(tang|tangerine|tan)/
data> yellow tangerine\=dfa
0: tangerine
1: tang
2: tan
Using the normal matching function on this data finds only "tang". The
longest matching string is always given first (and numbered zero). After a
PCRE2_ERROR_PARTIAL return, the output is "Partial match:", followed by the
partially matching substring. Note that this is the entire substring that was
inspected during the partial match; it may include characters before the actual
match start if a lookbehind assertion, \b, or \B was involved. (\K is not
supported for DFA matching.)
If global matching is requested, the search for further matches resumes at the end of the longest match. For example:
re> /(tang|tangerine|tan)/g
data> yellow tangerine and tangy sultana\=dfa
0: tangerine
1: tang
2: tan
0: tang
1: tan
0: tan
The alternative matching function does not support substring capture, so the
modifiers that are concerned with captured substrings are not relevant.
When the alternative matching function has given the PCRE2_ERROR_PARTIAL return, indicating that the subject partially matched the pattern, you can restart the match with additional subject data by means of the dfa_restart modifier. For example:
re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
data> 23ja\=P,dfa
Partial match: 23ja
data> n05\=dfa,dfa_restart
0: n05
For further information about partial matching, see the
pcre2partial
documentation.
If the pattern contains any callout requests, pcre2test's callout function is called during matching unless callout_none is specified. This works with both matching functions.
The callout function in pcre2test returns zero (carry on matching) by default, but you can use a callout_fail modifier in a subject line (as described above) to change this and other parameters of the callout.
Inserting callouts can be helpful when using pcre2test to check complicated regular expressions. For further information about callouts, see the pcre2callout documentation.
The output for callouts with numerical arguments and those with string arguments is slightly different.
By default, the callout function displays the callout number, the start and current positions in the subject text at the callout time, and the next pattern item to be tested. For example:
--->pqrabcdef
0 ^ ^ \d
This output indicates that callout number 0 occurred for a match attempt
starting at the fourth character of the subject string, when the pointer was at
the seventh character, and when the next pattern item was \d. Just
one circumflex is output if the start and current positions are the same.
Callouts numbered 255 are assumed to be automatic callouts, inserted as a result of the /auto_callout pattern modifier. In this case, instead of showing the callout number, the offset in the pattern, preceded by a plus, is output. For example:
re> /\d?[A-E]\*/auto_callout
data> E*
--->E*
+0 ^ \d?
+3 ^ [A-E]
+8 ^^ \*
+10 ^ ^
0: E*
If a pattern contains (*MARK) items, an additional line is output whenever
a change of latest mark is passed to the callout function. For example:
re> /a(*MARK:X)bc/auto_callout
data> abc
--->abc
+0 ^ a
+1 ^^ (*MARK:X)
+10 ^^ b
Latest Mark: X
+11 ^ ^ c
+12 ^ ^
0: abc
The mark changes between matching "a" and "b", but stays the same for the rest
of the match, so nothing more is output. If, as a result of backtracking, the
mark reverts to being unset, the text "<unset>" is output.
The output for a callout with a string argument is similar, except that instead of outputting a callout number before the position indicators, the callout string and its offset in the pattern string are output before the reflection of the subject string, and the subject string is reflected for each callout. For example:
re> /^ab(?C'first')cd(?C"second")ef/
data> abcdefg
Callout (7): 'first'
--->abcdefg
^ ^ c
Callout (20): "second"
--->abcdefg
^ ^ e
0: abcdef
When pcre2test is outputting text in the compiled version of a pattern, bytes other than 32-126 are always treated as non-printing characters and are therefore shown as hex escapes.
When pcre2test is outputting text that is a matched part of a subject string, it behaves in the same way, unless a different locale has been set for the pattern (using the /locale modifier). In this case, the isprint() function is used to distinguish printing and non-printing characters.
It is possible to save compiled patterns on disc or elsewhere, and reload them later, subject to a number of restrictions. JIT data cannot be saved. The host on which the patterns are reloaded must be running the same version of PCRE2, with the same code unit width, and must also have the same endianness, pointer width and PCRE2_SIZE type. Before compiled patterns can be saved they must be serialized, that is, converted to a stream of bytes. A single byte stream may contain any number of compiled patterns, but they must all use the same character tables. A single copy of the tables is included in the byte stream (its size is 1088 bytes).
The functions whose names begin with pcre2_serialize_ are used for serializing and de-serializing. They are described in the pcre2serialize documentation. In this section we describe the features of pcre2test that can be used to test these functions.
When a pattern with push modifier is successfully compiled, it is pushed onto a stack of compiled patterns, and pcre2test expects the next line to contain a new pattern (or command) instead of a subject line. By this means, a number of patterns can be compiled and retained. The push modifier is incompatible with posix, and control modifiers that act at match time are ignored (with a message). The jitverify modifier applies only at compile time. The command
#save <filename>causes all the stacked patterns to be serialized and the result written to the named file. Afterwards, all the stacked patterns are freed. The command
#load <filename>reads the data in the file, and then arranges for it to be de-serialized, with the resulting compiled patterns added to the pattern stack. The pattern on the top of the stack can be retrieved by the #pop command, which must be followed by lines of subjects that are to be matched with the pattern, terminated as usual by an empty line or end of file. This command may be followed by a modifier list containing only control modifiers that act after a pattern has been compiled. In particular, hex, posix, and push are not allowed, nor are any option-setting modifiers. The JIT modifiers are, however permitted. Here is an example that saves and reloads two patterns.
/abc/push /xyz/push #save tempfile #load tempfile #pop info xyz #pop jit,bincode abcIf jitverify is used with #pop, it does not automatically imply jit, which is different behaviour from when it is used on a pattern.
pcre2(3), pcre2api(3), pcre2callout(3), pcre2jit, pcre2matching(3), pcre2partial(d), pcre2pattern(3), pcre2serialize(3).
Philip Hazel
University Computing Service
Cambridge, England.
Last updated: 12 December 2015
Copyright © 1997-2015 University of Cambridge.
Return to the PCRE2 index page.