/************************************************* * Perl-Compatible Regular Expressions * *************************************************/ /* PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. Written by Philip Hazel Original API code Copyright (c) 1997-2012 University of Cambridge New API code Copyright (c) 2014 University of Cambridge ----------------------------------------------------------------------------- Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the University of Cambridge nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ----------------------------------------------------------------------------- */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #define NLBLOCK cb /* Block containing newline information */ #define PSSTART start_pattern /* Field containing processed string start */ #define PSEND end_pattern /* Field containing processed string end */ #include "pcre2_internal.h" /* There are a few things that vary with different code unit sizes. Handle them by defining macros in order to minimize #if usage. */ #if PCRE2_CODE_UNIT_WIDTH == 8 #define STRING_UTFn_RIGHTPAR STRING_UTF8_RIGHTPAR, 5 #define XDIGIT(c) xdigitab[c] #else /* Either 16-bit or 32-bit */ #define XDIGIT(c) (MAX_255(c)? xdigitab[c] : 0xff) #if PCRE2_CODE_UNIT_WIDTH == 16 #define STRING_UTFn_RIGHTPAR STRING_UTF16_RIGHTPAR, 6 #else /* 32-bit */ #define STRING_UTFn_RIGHTPAR STRING_UTF32_RIGHTPAR, 6 #endif #endif /* Function definitions to allow mutual recursion */ static int add_list_to_class(uint8_t *, PCRE2_UCHAR **, int, compile_block *, const uint32_t *, unsigned int); static BOOL compile_regex(uint32_t, PCRE2_UCHAR **, PCRE2_SPTR *, int *, BOOL, BOOL, int, int, uint32_t *, int32_t *, uint32_t *, int32_t *, branch_chain *, compile_block *, size_t *); /************************************************* * Code parameters and static tables * *************************************************/ /* This value specifies the size of stack workspace, which is used during the pre-compile phase when determining how much memory is required. The regex is partly compiled into this space, but the compiled parts are discarded as soon as they can be, so that hopefully there will never be an overrun. The code does, however, check for an overrun. The largest amount I've seen used is 218, so this number is very generous. The same workspace is used during the second, actual compile phase for remembering forward references to groups so that they can be filled in at the end. Each entry in this list occupies LINK_SIZE bytes, so even when LINK_SIZE is 4 there is plenty of room for most patterns. However, the memory can get filled up by repetitions of forward references, for example patterns like /(?1){0,1999}(b)/, and one user did hit the limit. The code has been changed so that the workspace is expanded in this situation. The value below is therefore a minimum, and we put a maximum on it for safety. The minimum is now also defined in terms of LINK_SIZE so that the size increase kicks in at the same number of forward references in all cases. */ #define COMPILE_WORK_SIZE (2048*LINK_SIZE) #define COMPILE_WORK_SIZE_MAX (100*COMPILE_WORK_SIZE) /* The overrun tests check for a slightly smaller size so that they detect the overrun before it actually does run off the end of the data block. */ #define WORK_SIZE_SAFETY_MARGIN (100) /* This value determines the size of the initial vector that is used for remembering named groups during the pre-compile. It is allocated on the stack, but if it is too small, it is expanded, in a similar way to the workspace. The value is the number of slots in the list. */ #define NAMED_GROUP_LIST_SIZE 20 /* The original PCRE required patterns to be zero-terminated, and it simplifies the compiling code if it is guaranteed that there is a zero code unit at the end of the pattern, because this means that tests for coding sequences such as (*SKIP) or even just (?<= can check a sequence of code units without having to keep checking for the end of the pattern. The new PCRE2 API allows zero code units within patterns if a positive length is given, but in order to keep most of the compiling code as it was, we copy such patterns and add a zero on the end. This value determines the size of space on the stack that is used if the pattern fits; if not, heap memory is used. */ #define COPIED_PATTERN_SIZE 1024 /* Maximum length value to check against when making sure that the variable that holds the compiled pattern length does not overflow. We make it a bit less than INT_MAX to allow for adding in group terminating bytes, so that we don't have to check them every time. */ #define OFLOW_MAX (INT_MAX - 20) /* Macro for setting individual bits in class bitmaps. */ #define SETBIT(a,b) a[(b)/8] |= (1 << ((b)&7)) /* Private flags added to firstcu and reqcu. */ #define REQ_CASELESS (1 << 0) /* Indicates caselessness */ #define REQ_VARY (1 << 1) /* reqcu followed non-literal item */ /* Negative values for the firstcu and reqcu flags */ #define REQ_UNSET (-2) /* Not yet found anything */ #define REQ_NONE (-1) /* Found not fixed char */ /* This bit (which is greater than any UTF value) is used to indicate that a variable contains a number of code units instead of an actual code point. */ #define UTF_LENGTH 0x10000000l /* This simple test for a decimal digit works for both ASCII/Unicode and EBCDIC and is fast (a good compiler can turn it into a subtraction and unsigned comparison). */ #define IS_DIGIT(x) ((x) >= CHAR_0 && (x) <= CHAR_9) /* Table to identify hex digits. The tables in chartables are dependent on the locale, and may mark arbitrary characters as digits. We want to recognize only 0-9, a-z, and A-Z as hex digits, which is why we have a private table here. It costs 256 bytes, but it is a lot faster than doing character value tests (at least in some simple cases I timed), and in some applications one wants PCRE to compile efficiently as well as match efficiently. The value in the table is the binary hex digit value, or 0xff for non-hex digits. */ /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in UTF-8 mode. */ #ifndef EBCDIC static const uint8_t xdigitab[] = { 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0- 7 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 8- 15 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 16- 23 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 24- 31 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* - ' */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* ( - / */ 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, /* 0 - 7 */ 0x08,0x09,0xff,0xff,0xff,0xff,0xff,0xff, /* 8 - ? */ 0xff,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,0xff, /* @ - G */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* H - O */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* P - W */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* X - _ */ 0xff,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,0xff, /* ` - g */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* h - o */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* p - w */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* x -127 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 128-135 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 136-143 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 144-151 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 152-159 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 160-167 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 168-175 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 176-183 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 184-191 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 192-199 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 2ff-207 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 208-215 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 216-223 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 224-231 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 232-239 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 240-247 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff};/* 248-255 */ #else /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */ static const uint8_t xdigitab[] = { 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0- 7 0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 8- 15 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 16- 23 10 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 24- 31 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 32- 39 20 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 40- 47 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 48- 55 30 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 56- 63 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* - 71 40 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 72- | */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* & - 87 50 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 88- 95 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* - -103 60 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 104- ? */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 112-119 70 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 120- " */ 0xff,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,0xff, /* 128- g 80 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* h -143 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 144- p 90 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* q -159 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 160- x A0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* y -175 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* ^ -183 B0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 184-191 */ 0xff,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,0xff, /* { - G C0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* H -207 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* } - P D0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* Q -223 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* \ - X E0 */ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* Y -239 */ 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, /* 0 - 7 F0 */ 0x08,0x09,0xff,0xff,0xff,0xff,0xff,0xff};/* 8 -255 */ #endif /* EBCDIC */ /* Table for handling alphanumeric escaped characters. Positive returns are simple data values; negative values are for special things like \d and so on. Zero means further processing is needed (for things like \x), or the escape is invalid. */ /* This is the "normal" table for ASCII systems or for EBCDIC systems running in UTF-8 mode. It runs from '0' to 'z'. */ #ifndef EBCDIC #define ESCAPES_FIRST CHAR_0 #define ESCAPES_LAST CHAR_z static const short int escapes[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, CHAR_COLON, CHAR_SEMICOLON, CHAR_LESS_THAN_SIGN, CHAR_EQUALS_SIGN, CHAR_GREATER_THAN_SIGN, CHAR_QUESTION_MARK, CHAR_COMMERCIAL_AT, -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E, 0, -ESC_G, -ESC_H, 0, 0, -ESC_K, 0, 0, -ESC_N, 0, -ESC_P, -ESC_Q, -ESC_R, -ESC_S, 0, 0, -ESC_V, -ESC_W, -ESC_X, 0, -ESC_Z, CHAR_LEFT_SQUARE_BRACKET, CHAR_BACKSLASH, CHAR_RIGHT_SQUARE_BRACKET, CHAR_CIRCUMFLEX_ACCENT, CHAR_UNDERSCORE, CHAR_GRAVE_ACCENT, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, -ESC_h, 0, 0, -ESC_k, 0, 0, ESC_n, 0, -ESC_p, 0, ESC_r, -ESC_s, ESC_tee, 0, -ESC_v, -ESC_w, 0, 0, -ESC_z }; #else /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. It runs from 'a' to '9'. */ #define ESCAPES_FIRST CHAR_a #define ESCAPES_LAST CHAR_9 static const short int escapes[] = { /* 80 */ 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, /* 88 */-ESC_h, 0, 0, '{', 0, 0, 0, 0, /* 90 */ 0, 0, -ESC_k, 'l', 0, ESC_n, 0, -ESC_p, /* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0, /* A0 */ 0, '~', -ESC_s, ESC_tee, 0,-ESC_v, -ESC_w, 0, /* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0, /* B0 */ 0, 0, 0, 0, 0, 0, 0, 0, /* B8 */ 0, 0, 0, 0, 0, ']', '=', '-', /* C0 */ '{',-ESC_A, -ESC_B, -ESC_C, -ESC_D,-ESC_E, 0, -ESC_G, /* C8 */-ESC_H, 0, 0, 0, 0, 0, 0, 0, /* D0 */ '}', 0, -ESC_K, 0, 0,-ESC_N, 0, -ESC_P, /* D8 */-ESC_Q,-ESC_R, 0, 0, 0, 0, 0, 0, /* E0 */ '\\', 0, -ESC_S, 0, 0,-ESC_V, -ESC_W, -ESC_X, /* E8 */ 0,-ESC_Z, 0, 0, 0, 0, 0, 0, /* F0 */ 0, 0, 0, 0, 0, 0, 0, 0, /* F8 */ 0, 0 }; #endif /* Table of special "verbs" like (*PRUNE). This is a short table, so it is searched linearly. Put all the names into a single string, in order to reduce the number of relocations when a shared library is dynamically linked. The string is built from string macros so that it works in UTF-8 mode on EBCDIC platforms. */ typedef struct verbitem { int len; /* Length of verb name */ int op; /* Op when no arg, or -1 if arg mandatory */ int op_arg; /* Op when arg present, or -1 if not allowed */ } verbitem; static const char verbnames[] = "\0" /* Empty name is a shorthand for MARK */ STRING_MARK0 STRING_ACCEPT0 STRING_COMMIT0 STRING_F0 STRING_FAIL0 STRING_PRUNE0 STRING_SKIP0 STRING_THEN; static const verbitem verbs[] = { { 0, -1, OP_MARK }, { 4, -1, OP_MARK }, { 6, OP_ACCEPT, -1 }, { 6, OP_COMMIT, -1 }, { 1, OP_FAIL, -1 }, { 4, OP_FAIL, -1 }, { 5, OP_PRUNE, OP_PRUNE_ARG }, { 4, OP_SKIP, OP_SKIP_ARG }, { 4, OP_THEN, OP_THEN_ARG } }; static const int verbcount = sizeof(verbs)/sizeof(verbitem); /* Substitutes for [[:<:]] and [[:>:]], which mean start and end of word in another regex library. */ static const PCRE2_UCHAR sub_start_of_word[] = { CHAR_BACKSLASH, CHAR_b, CHAR_LEFT_PARENTHESIS, CHAR_QUESTION_MARK, CHAR_EQUALS_SIGN, CHAR_BACKSLASH, CHAR_w, CHAR_RIGHT_PARENTHESIS, '\0' }; static const PCRE2_UCHAR sub_end_of_word[] = { CHAR_BACKSLASH, CHAR_b, CHAR_LEFT_PARENTHESIS, CHAR_QUESTION_MARK, CHAR_LESS_THAN_SIGN, CHAR_EQUALS_SIGN, CHAR_BACKSLASH, CHAR_w, CHAR_RIGHT_PARENTHESIS, '\0' }; /* Tables of names of POSIX character classes and their lengths. The names are now all in a single string, to reduce the number of relocations when a shared library is dynamically loaded. The list of lengths is terminated by a zero length entry. The first three must be alpha, lower, upper, as this is assumed for handling case independence. The indices for graph, print, and punct are needed, so identify them. */ static const char posix_names[] = STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0 STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0 STRING_graph0 STRING_print0 STRING_punct0 STRING_space0 STRING_word0 STRING_xdigit; static const uint8_t posix_name_lengths[] = { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 }; #define PC_GRAPH 8 #define PC_PRINT 9 #define PC_PUNCT 10 /* Table of class bit maps for each POSIX class. Each class is formed from a base map, with an optional addition or removal of another map. Then, for some classes, there is some additional tweaking: for [:blank:] the vertical space characters are removed, and for [:alpha:] and [:alnum:] the underscore character is removed. The triples in the table consist of the base map offset, second map offset or -1 if no second map, and a non-negative value for map addition or a negative value for map subtraction (if there are two maps). The absolute value of the third field has these meanings: 0 => no tweaking, 1 => remove vertical space characters, 2 => remove underscore. */ static const int posix_class_maps[] = { cbit_word, cbit_digit, -2, /* alpha */ cbit_lower, -1, 0, /* lower */ cbit_upper, -1, 0, /* upper */ cbit_word, -1, 2, /* alnum - word without underscore */ cbit_print, cbit_cntrl, 0, /* ascii */ cbit_space, -1, 1, /* blank - a GNU extension */ cbit_cntrl, -1, 0, /* cntrl */ cbit_digit, -1, 0, /* digit */ cbit_graph, -1, 0, /* graph */ cbit_print, -1, 0, /* print */ cbit_punct, -1, 0, /* punct */ cbit_space, -1, 0, /* space */ cbit_word, -1, 0, /* word - a Perl extension */ cbit_xdigit,-1, 0 /* xdigit */ }; /* Table of substitutes for \d etc when PCRE2_UCP is set. They are replaced by Unicode property escapes. */ #ifdef SUPPORT_UTF static const PCRE2_UCHAR string_PNd[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pNd[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_N, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PXsp[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pXsp[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_s, CHAR_p, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PXwd[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pXwd[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_w, CHAR_d, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static PCRE2_SPTR substitutes[] = { string_PNd, /* \D */ string_pNd, /* \d */ string_PXsp, /* \S */ /* Xsp is Perl space, but from 8.34, Perl */ string_pXsp, /* \s */ /* space and POSIX space are the same. */ string_PXwd, /* \W */ string_pXwd /* \w */ }; /* The POSIX class substitutes must be in the order of the POSIX class names, defined above, and there are both positive and negative cases. NULL means no general substitute of a Unicode property escape (\p or \P). However, for some POSIX classes (e.g. graph, print, punct) a special property code is compiled directly. */ static const PCRE2_UCHAR string_pCc[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_C, CHAR_c, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pL[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pLl[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pLu[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_pXan[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_h[] = { CHAR_BACKSLASH, CHAR_h, '\0' }; static const PCRE2_UCHAR string_pXps[] = { CHAR_BACKSLASH, CHAR_p, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PCc[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_C, CHAR_c, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PL[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PLl[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_l, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PLu[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_L, CHAR_u, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_PXan[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_a, CHAR_n, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static const PCRE2_UCHAR string_H[] = { CHAR_BACKSLASH, CHAR_H, '\0' }; static const PCRE2_UCHAR string_PXps[] = { CHAR_BACKSLASH, CHAR_P, CHAR_LEFT_CURLY_BRACKET, CHAR_X, CHAR_p, CHAR_s, CHAR_RIGHT_CURLY_BRACKET, '\0' }; static PCRE2_SPTR posix_substitutes[] = { string_pL, /* alpha */ string_pLl, /* lower */ string_pLu, /* upper */ string_pXan, /* alnum */ NULL, /* ascii */ string_h, /* blank */ string_pCc, /* cntrl */ string_pNd, /* digit */ NULL, /* graph */ NULL, /* print */ NULL, /* punct */ string_pXps, /* space */ /* Xps is POSIX space, but from 8.34 */ string_pXwd, /* word */ /* Perl and POSIX space are the same */ NULL, /* xdigit */ /* Negated cases */ string_PL, /* ^alpha */ string_PLl, /* ^lower */ string_PLu, /* ^upper */ string_PXan, /* ^alnum */ NULL, /* ^ascii */ string_H, /* ^blank */ string_PCc, /* ^cntrl */ string_PNd, /* ^digit */ NULL, /* ^graph */ NULL, /* ^print */ NULL, /* ^punct */ string_PXps, /* ^space */ /* Xps is POSIX space, but from 8.34 */ string_PXwd, /* ^word */ /* Perl and POSIX space are the same */ NULL /* ^xdigit */ }; #define POSIX_SUBSIZE (sizeof(posix_substitutes) / sizeof(PCRE2_UCHAR *)) #endif /* SUPPORT_UTF */ /* Masks for checking option settings. */ #define PUBLIC_COMPILE_OPTIONS \ (PCRE2_ANCHORED|PCRE2_ALLOW_EMPTY_CLASS|PCRE2_ALT_BSUX|PCRE2_AUTO_CALLOUT| \ PCRE2_CASELESS|PCRE2_DOLLAR_ENDONLY|PCRE2_DOTALL|PCRE2_DUPNAMES| \ PCRE2_EXTENDED|PCRE2_FIRSTLINE|PCRE2_MATCH_UNSET_BACKREF| \ PCRE2_MULTILINE|PCRE2_NEVER_UCP|PCRE2_NEVER_UTF|PCRE2_NO_AUTO_CAPTURE| \ PCRE2_NO_AUTO_POSSESS|PCRE2_NO_START_OPTIMIZE|PCRE2_NO_UTF_CHECK| \ PCRE2_UCP|PCRE2_UNGREEDY|PCRE2_UTF) /* Compile time error code numbers. They are given names so that they can more easily be tracked. When a new number is added, the tables called eint1 and eint2 in pcre2posix.c must be updated, and a new error text must be added to compile_error_texts in pcre2_error.c. */ enum { ERR0 = COMPILE_ERROR_BASE, ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9, ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19, ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29, ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39, ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49, ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59, ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68, ERR69, ERR70, ERR71, ERR72, ERR73, ERR74, ERR75, ERR76, ERR77, ERR78 }; /* This is a table of start-of-pattern options such as (*UTF) and settings such as (*LIMIT_MATCH=nnnn) and (*CRLF). For completeness and backward compatibility, (*UTFn) is supported in the relevant libraries, but (*UTF) is generic and always supported. */ enum { PSO_OPT, /* Value is an option bit */ PSO_NL, /* Value is a newline type */ PSO_BSR, /* Value is a \R type */ PSO_LIMM, /* Read integer value for match limit */ PSO_LIMR }; /* Read integer value for recursion limit */ typedef struct pso { const uint8_t *name; uint16_t length; uint16_t type; uint32_t value; } pso; /* NB: STRING_UTFn_RIGHTPAR contains the length as well */ static pso pso_list[] = { { (uint8_t *)STRING_UTFn_RIGHTPAR, PSO_OPT, PCRE2_UTF }, { (uint8_t *)STRING_UTF_RIGHTPAR, 4, PSO_OPT, PCRE2_UTF }, { (uint8_t *)STRING_UCP_RIGHTPAR, 4, PSO_OPT, PCRE2_UCP }, { (uint8_t *)STRING_NO_AUTO_POSSESS_RIGHTPAR, 16, PSO_OPT, PCRE2_NO_AUTO_POSSESS }, { (uint8_t *)STRING_NO_START_OPT_RIGHTPAR, 13, PSO_OPT, PCRE2_NO_START_OPTIMIZE }, { (uint8_t *)STRING_LIMIT_MATCH_EQ, 12, PSO_LIMM, 0 }, { (uint8_t *)STRING_LIMIT_RECURSION_EQ, 16, PSO_LIMR, 0 }, { (uint8_t *)STRING_CR_RIGHTPAR, 3, PSO_NL, PCRE2_NEWLINE_CR }, { (uint8_t *)STRING_LF_RIGHTPAR, 3, PSO_NL, PCRE2_NEWLINE_LF }, { (uint8_t *)STRING_CRLF_RIGHTPAR, 5, PSO_NL, PCRE2_NEWLINE_CRLF }, { (uint8_t *)STRING_ANY_RIGHTPAR, 4, PSO_NL, PCRE2_NEWLINE_ANY }, { (uint8_t *)STRING_ANYCRLF_RIGHTPAR, 8, PSO_NL, PCRE2_NEWLINE_ANYCRLF }, { (uint8_t *)STRING_BSR_ANYCRLF_RIGHTPAR, 12, PSO_BSR, PCRE2_BSR_ANYCRLF }, { (uint8_t *)STRING_BSR_UNICODE_RIGHTPAR, 12, PSO_BSR, PCRE2_BSR_UNICODE } }; /* This table is used when converting repeating opcodes into possessified versions as a result of an explicit possessive quantifier such as ++. A zero value means there is no possessified version - in those cases the item in question must be wrapped in ONCE brackets. The table is truncated at OP_CALLOUT because all relevant opcodes are less than that. */ static const uint8_t opcode_possessify[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 15 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16 - 31 */ 0, /* NOTI */ OP_POSSTAR, 0, /* STAR, MINSTAR */ OP_POSPLUS, 0, /* PLUS, MINPLUS */ OP_POSQUERY, 0, /* QUERY, MINQUERY */ OP_POSUPTO, 0, /* UPTO, MINUPTO */ 0, /* EXACT */ 0, 0, 0, 0, /* POS{STAR,PLUS,QUERY,UPTO} */ OP_POSSTARI, 0, /* STARI, MINSTARI */ OP_POSPLUSI, 0, /* PLUSI, MINPLUSI */ OP_POSQUERYI, 0, /* QUERYI, MINQUERYI */ OP_POSUPTOI, 0, /* UPTOI, MINUPTOI */ 0, /* EXACTI */ 0, 0, 0, 0, /* POS{STARI,PLUSI,QUERYI,UPTOI} */ OP_NOTPOSSTAR, 0, /* NOTSTAR, NOTMINSTAR */ OP_NOTPOSPLUS, 0, /* NOTPLUS, NOTMINPLUS */ OP_NOTPOSQUERY, 0, /* NOTQUERY, NOTMINQUERY */ OP_NOTPOSUPTO, 0, /* NOTUPTO, NOTMINUPTO */ 0, /* NOTEXACT */ 0, 0, 0, 0, /* NOTPOS{STAR,PLUS,QUERY,UPTO} */ OP_NOTPOSSTARI, 0, /* NOTSTARI, NOTMINSTARI */ OP_NOTPOSPLUSI, 0, /* NOTPLUSI, NOTMINPLUSI */ OP_NOTPOSQUERYI, 0, /* NOTQUERYI, NOTMINQUERYI */ OP_NOTPOSUPTOI, 0, /* NOTUPTOI, NOTMINUPTOI */ 0, /* NOTEXACTI */ 0, 0, 0, 0, /* NOTPOS{STARI,PLUSI,QUERYI,UPTOI} */ OP_TYPEPOSSTAR, 0, /* TYPESTAR, TYPEMINSTAR */ OP_TYPEPOSPLUS, 0, /* TYPEPLUS, TYPEMINPLUS */ OP_TYPEPOSQUERY, 0, /* TYPEQUERY, TYPEMINQUERY */ OP_TYPEPOSUPTO, 0, /* TYPEUPTO, TYPEMINUPTO */ 0, /* TYPEEXACT */ 0, 0, 0, 0, /* TYPEPOS{STAR,PLUS,QUERY,UPTO} */ OP_CRPOSSTAR, 0, /* CRSTAR, CRMINSTAR */ OP_CRPOSPLUS, 0, /* CRPLUS, CRMINPLUS */ OP_CRPOSQUERY, 0, /* CRQUERY, CRMINQUERY */ OP_CRPOSRANGE, 0, /* CRRANGE, CRMINRANGE */ 0, 0, 0, 0, /* CRPOS{STAR,PLUS,QUERY,RANGE} */ 0, 0, 0, /* CLASS, NCLASS, XCLASS */ 0, 0, /* REF, REFI */ 0, 0, /* DNREF, DNREFI */ 0, 0 /* RECURSE, CALLOUT */ }; /* FIXME: this is currently incomplete (free JIT?) */ /************************************************* * Free compiled code * *************************************************/ PCRE2_EXP_DEFN void PCRE2_CALL_CONVENTION pcre2_code_free(pcre2_code *code) { if (code != NULL) code->memctl.free(code, code->memctl.memory_data); } /************************************************* * Insert an automatic callout point * *************************************************/ /* This function is called when the PCRE2_AUTO_CALLOUT option is set, to insert callout points before each pattern item. Arguments: code current code pointer ptr current pattern pointer cb general compile-time data Returns: new code pointer */ static PCRE2_UCHAR * auto_callout(PCRE2_UCHAR *code, PCRE2_SPTR ptr, compile_block *cb) { *code++ = OP_CALLOUT; *code++ = 255; PUT(code, 0, ptr - cb->start_pattern); /* Pattern offset */ PUT(code, LINK_SIZE, 0); /* Default length */ return code + 2 * LINK_SIZE; } /************************************************* * Complete a callout item * *************************************************/ /* A callout item contains the length of the next item in the pattern, which we can't fill in till after we have reached the relevant point. This is used for both automatic and manual callouts. Arguments: previous_callout points to previous callout item ptr current pattern pointer cb general compile-time data Returns: nothing */ static void complete_callout(PCRE2_UCHAR *previous_callout, PCRE2_SPTR ptr, compile_block *cb) { size_t length = ptr - cb->start_pattern - GET(previous_callout, 2); PUT(previous_callout, 2 + LINK_SIZE, length); } /************************************************* * Find the fixed length of a branch * *************************************************/ /* Scan a branch and compute the fixed length of subject that will match it, if the length is fixed. This is needed for dealing with backward assertions. In UTF mode, the result is in code units rather than bytes. The branch is temporarily terminated with OP_END when this function is called. This function is called when a backward assertion is encountered, so that if it fails, the error message can point to the correct place in the pattern. However, we cannot do this when the assertion contains subroutine calls, because they can be forward references. We solve this by remembering this case and doing the check at the end; a flag specifies which mode we are running in. Arguments: code points to the start of the pattern (the bracket) utf TRUE in UTF mode atend TRUE if called when the pattern is complete cb the "compile data" structure Returns: the fixed length, or -1 if there is no fixed length, or -2 if \C was encountered (in UTF-8 mode only) or -3 if an OP_RECURSE item was encountered and atend is FALSE or -4 if an unknown opcode was encountered (internal error) */ static int find_fixedlength(PCRE2_UCHAR *code, BOOL utf, BOOL atend, compile_block *cb) { int length = -1; register int branchlength = 0; register PCRE2_UCHAR *cc = code + 1 + LINK_SIZE; /* Scan along the opcodes for this branch. If we get to the end of the branch, check the length against that of the other branches. */ for (;;) { int d; PCRE2_UCHAR *ce, *cs; register PCRE2_UCHAR op = *cc; switch (op) { /* We only need to continue for OP_CBRA (normal capturing bracket) and OP_BRA (normal non-capturing bracket) because the other variants of these opcodes are all concerned with unlimited repeated groups, which of course are not of fixed length. */ case OP_CBRA: case OP_BRA: case OP_ONCE: case OP_ONCE_NC: case OP_COND: d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cb); if (d < 0) return d; branchlength += d; do cc += GET(cc, 1); while (*cc == OP_ALT); cc += 1 + LINK_SIZE; break; /* Reached end of a branch; if it's a ket it is the end of a nested call. If it's ALT it is an alternation in a nested call. An ACCEPT is effectively an ALT. If it is END it's the end of the outer call. All can be handled by the same code. Note that we must not include the OP_KETRxxx opcodes here, because they all imply an unlimited repeat. */ case OP_ALT: case OP_KET: case OP_END: case OP_ACCEPT: case OP_ASSERT_ACCEPT: if (length < 0) length = branchlength; else if (length != branchlength) return -1; if (*cc != OP_ALT) return length; cc += 1 + LINK_SIZE; branchlength = 0; break; /* A true recursion implies not fixed length, but a subroutine call may be OK. If the subroutine is a forward reference, we can't deal with it until the end of the pattern, so return -3. */ case OP_RECURSE: if (!atend) return -3; cs = ce = (PCRE2_UCHAR *)cb->start_code + GET(cc, 1); /* Start subpattern */ do ce += GET(ce, 1); while (*ce == OP_ALT); /* End subpattern */ if (cc > cs && cc < ce) return -1; /* Recursion */ d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cb); if (d < 0) return d; branchlength += d; cc += 1 + LINK_SIZE; break; /* Skip over assertive subpatterns */ case OP_ASSERT: case OP_ASSERT_NOT: case OP_ASSERTBACK: case OP_ASSERTBACK_NOT: do cc += GET(cc, 1); while (*cc == OP_ALT); cc += PRIV(OP_lengths)[*cc]; break; /* Skip over things that don't match chars */ case OP_MARK: case OP_PRUNE_ARG: case OP_SKIP_ARG: case OP_THEN_ARG: cc += cc[1] + PRIV(OP_lengths)[*cc]; break; case OP_CALLOUT: case OP_CIRC: case OP_CIRCM: case OP_CLOSE: case OP_COMMIT: case OP_CREF: case OP_DEF: case OP_DNCREF: case OP_DNRREF: case OP_DOLL: case OP_DOLLM: case OP_EOD: case OP_EODN: case OP_FAIL: case OP_NOT_WORD_BOUNDARY: case OP_PRUNE: case OP_REVERSE: case OP_RREF: case OP_SET_SOM: case OP_SKIP: case OP_SOD: case OP_SOM: case OP_THEN: case OP_WORD_BOUNDARY: cc += PRIV(OP_lengths)[*cc]; break; /* Handle literal characters */ case OP_CHAR: case OP_CHARI: case OP_NOT: case OP_NOTI: branchlength++; cc += 2; #ifdef SUPPORT_UTF if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]); #endif break; /* Handle exact repetitions. The count is already in characters, but we need to skip over a multibyte character in UTF8 mode. */ case OP_EXACT: case OP_EXACTI: case OP_NOTEXACT: case OP_NOTEXACTI: branchlength += (int)GET2(cc,1); cc += 2 + IMM2_SIZE; #ifdef SUPPORT_UTF if (utf && HAS_EXTRALEN(cc[-1])) cc += GET_EXTRALEN(cc[-1]); #endif break; case OP_TYPEEXACT: branchlength += GET2(cc,1); if (cc[1 + IMM2_SIZE] == OP_PROP || cc[1 + IMM2_SIZE] == OP_NOTPROP) cc += 2; cc += 1 + IMM2_SIZE + 1; break; /* Handle single-char matchers */ case OP_PROP: case OP_NOTPROP: cc += 2; /* Fall through */ case OP_HSPACE: case OP_VSPACE: case OP_NOT_HSPACE: case OP_NOT_VSPACE: case OP_NOT_DIGIT: case OP_DIGIT: case OP_NOT_WHITESPACE: case OP_WHITESPACE: case OP_NOT_WORDCHAR: case OP_WORDCHAR: case OP_ANY: case OP_ALLANY: branchlength++; cc++; break; /* The single-byte matcher isn't allowed. This only happens in UTF-8 mode; otherwise \C is coded as OP_ALLANY. */ case OP_ANYBYTE: return -2; /* Check a class for variable quantification */ case OP_CLASS: case OP_NCLASS: #ifdef SUPPORT_WIDE_CHARS case OP_XCLASS: /* The original code caused an unsigned overflow in 64 bit systems, so now we use a conditional statement. */ if (op == OP_XCLASS) cc += GET(cc, 1); else cc += PRIV(OP_lengths)[OP_CLASS]; #else cc += PRIV(OP_lengths)[OP_CLASS]; #endif switch (*cc) { case OP_CRSTAR: case OP_CRMINSTAR: case OP_CRPLUS: case OP_CRMINPLUS: case OP_CRQUERY: case OP_CRMINQUERY: case OP_CRPOSSTAR: case OP_CRPOSPLUS: case OP_CRPOSQUERY: return -1; case OP_CRRANGE: case OP_CRMINRANGE: case OP_CRPOSRANGE: if (GET2(cc,1) != GET2(cc,1+IMM2_SIZE)) return -1; branchlength += (int)GET2(cc,1); cc += 1 + 2 * IMM2_SIZE; break; default: branchlength++; } break; /* Anything else is variable length */ case OP_ANYNL: case OP_BRAMINZERO: case OP_BRAPOS: case OP_BRAPOSZERO: case OP_BRAZERO: case OP_CBRAPOS: case OP_EXTUNI: case OP_KETRMAX: case OP_KETRMIN: case OP_KETRPOS: case OP_MINPLUS: case OP_MINPLUSI: case OP_MINQUERY: case OP_MINQUERYI: case OP_MINSTAR: case OP_MINSTARI: case OP_MINUPTO: case OP_MINUPTOI: case OP_NOTMINPLUS: case OP_NOTMINPLUSI: case OP_NOTMINQUERY: case OP_NOTMINQUERYI: case OP_NOTMINSTAR: case OP_NOTMINSTARI: case OP_NOTMINUPTO: case OP_NOTMINUPTOI: case OP_NOTPLUS: case OP_NOTPLUSI: case OP_NOTPOSPLUS: case OP_NOTPOSPLUSI: case OP_NOTPOSQUERY: case OP_NOTPOSQUERYI: case OP_NOTPOSSTAR: case OP_NOTPOSSTARI: case OP_NOTPOSUPTO: case OP_NOTPOSUPTOI: case OP_NOTQUERY: case OP_NOTQUERYI: case OP_NOTSTAR: case OP_NOTSTARI: case OP_NOTUPTO: case OP_NOTUPTOI: case OP_PLUS: case OP_PLUSI: case OP_POSPLUS: case OP_POSPLUSI: case OP_POSQUERY: case OP_POSQUERYI: case OP_POSSTAR: case OP_POSSTARI: case OP_POSUPTO: case OP_POSUPTOI: case OP_QUERY: case OP_QUERYI: case OP_REF: case OP_REFI: case OP_DNREF: case OP_DNREFI: case OP_SBRA: case OP_SBRAPOS: case OP_SCBRA: case OP_SCBRAPOS: case OP_SCOND: case OP_SKIPZERO: case OP_STAR: case OP_STARI: case OP_TYPEMINPLUS: case OP_TYPEMINQUERY: case OP_TYPEMINSTAR: case OP_TYPEMINUPTO: case OP_TYPEPLUS: case OP_TYPEPOSPLUS: case OP_TYPEPOSQUERY: case OP_TYPEPOSSTAR: case OP_TYPEPOSUPTO: case OP_TYPEQUERY: case OP_TYPESTAR: case OP_TYPEUPTO: case OP_UPTO: case OP_UPTOI: return -1; /* Catch unrecognized opcodes so that when new ones are added they are not forgotten, as has happened in the past. */ default: return -4; } } /* Control never gets here */ } /************************************************* * Find first significant op code * *************************************************/ /* This is called by several functions that scan a compiled expression looking for a fixed first character, or an anchoring op code etc. It skips over things that do not influence this. For some calls, it makes sense to skip negative forward and all backward assertions, and also the \b assertion; for others it does not. Arguments: code pointer to the start of the group skipassert TRUE if certain assertions are to be skipped Returns: pointer to the first significant opcode */ static const PCRE2_UCHAR* first_significant_code(PCRE2_SPTR code, BOOL skipassert) { for (;;) { switch ((int)*code) { case OP_ASSERT_NOT: case OP_ASSERTBACK: case OP_ASSERTBACK_NOT: if (!skipassert) return code; do code += GET(code, 1); while (*code == OP_ALT); code += PRIV(OP_lengths)[*code]; break; case OP_WORD_BOUNDARY: case OP_NOT_WORD_BOUNDARY: if (!skipassert) return code; /* Fall through */ case OP_CALLOUT: case OP_CREF: case OP_DNCREF: case OP_RREF: case OP_DNRREF: case OP_DEF: code += PRIV(OP_lengths)[*code]; break; default: return code; } } /* Control never reaches here */ } /************************************************* * Scan compiled branch for non-emptiness * *************************************************/ /* This function scans through a branch of a compiled pattern to see whether it can match the empty string. It is called from could_be_empty() below and from compile_branch() when checking for an unlimited repeat of a group that can match nothing. Note that first_significant_code() skips over backward and negative forward assertions when its final argument is TRUE. If we hit an unclosed bracket, we return "empty" - this means we've struck an inner bracket whose current branch will already have been scanned. Arguments: code points to start of search endcode points to where to stop utf TRUE if in UTF mode cb compile data recurses chain of recurse_check to catch mutual recursion Returns: TRUE if what is matched could be empty */ typedef struct recurse_check { struct recurse_check *prev; PCRE2_SPTR group; } recurse_check; static BOOL could_be_empty_branch(PCRE2_SPTR code, PCRE2_SPTR endcode, BOOL utf, compile_block *cb, recurse_check *recurses) { register PCRE2_UCHAR c; recurse_check this_recurse; for (code = first_significant_code(code + PRIV(OP_lengths)[*code], TRUE); code < endcode; code = first_significant_code(code + PRIV(OP_lengths)[c], TRUE)) { PCRE2_SPTR ccode; c = *code; /* Skip over forward assertions; the other assertions are skipped by first_significant_code() with a TRUE final argument. */ if (c == OP_ASSERT) { do code += GET(code, 1); while (*code == OP_ALT); c = *code; continue; } /* For a recursion/subroutine call, if its end has been reached, which implies a backward reference subroutine call, we can scan it. If it's a forward reference subroutine call, we can't. To detect forward reference we have to scan up the list that is kept in the workspace. This function is called only when doing the real compile, not during the pre-compile that measures the size of the compiled pattern. */ if (c == OP_RECURSE) { PCRE2_SPTR scode = cb->start_code + GET(code, 1); PCRE2_SPTR endgroup = scode; BOOL empty_branch; /* Test for forward reference or uncompleted reference. This is disabled when called to scan a completed pattern by setting cb->start_workspace to NULL. */ if (cb->start_workspace != NULL) { PCRE2_SPTR tcode; for (tcode = cb->start_workspace; tcode < cb->hwm; tcode += LINK_SIZE) if ((int)GET(tcode, 0) == (int)(code + 1 - cb->start_code)) return TRUE; if (GET(scode, 1) == 0) return TRUE; /* Unclosed */ } /* If the reference is to a completed group, we need to detect whether this is a recursive call, as otherwise there will be an infinite loop. If it is a recursion, just skip over it. Simple recursions are easily detected. For mutual recursions we keep a chain on the stack. */ do endgroup += GET(endgroup, 1); while (*endgroup == OP_ALT); if (code >= scode && code <= endgroup) continue; /* Simple recursion */ else { recurse_check *r = recurses; for (r = recurses; r != NULL; r = r->prev) if (r->group == scode) break; if (r != NULL) continue; /* Mutual recursion */ } /* Completed reference; scan the referenced group, remembering it on the stack chain to detect mutual recursions. */ empty_branch = FALSE; this_recurse.prev = recurses; this_recurse.group = scode; do { if (could_be_empty_branch(scode, endcode, utf, cb, &this_recurse)) { empty_branch = TRUE; break; } scode += GET(scode, 1); } while (*scode == OP_ALT); if (!empty_branch) return FALSE; /* All branches are non-empty */ continue; } /* Groups with zero repeats can of course be empty; skip them. */ if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO || c == OP_BRAPOSZERO) { code += PRIV(OP_lengths)[c]; do code += GET(code, 1); while (*code == OP_ALT); c = *code; continue; } /* A nested group that is already marked as "could be empty" can just be skipped. */ if (c == OP_SBRA || c == OP_SBRAPOS || c == OP_SCBRA || c == OP_SCBRAPOS) { do code += GET(code, 1); while (*code == OP_ALT); c = *code; continue; } /* For other groups, scan the branches. */ if (c == OP_BRA || c == OP_BRAPOS || c == OP_CBRA || c == OP_CBRAPOS || c == OP_ONCE || c == OP_ONCE_NC || c == OP_COND) { BOOL empty_branch; if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */ /* If a conditional group has only one branch, there is a second, implied, empty branch, so just skip over the conditional, because it could be empty. Otherwise, scan the individual branches of the group. */ if (c == OP_COND && code[GET(code, 1)] != OP_ALT) code += GET(code, 1); else { empty_branch = FALSE; do { if (!empty_branch && could_be_empty_branch(code, endcode, utf, cb, NULL)) empty_branch = TRUE; code += GET(code, 1); } while (*code == OP_ALT); if (!empty_branch) return FALSE; /* All branches are non-empty */ } c = *code; continue; } /* Handle the other opcodes */ switch (c) { /* Check for quantifiers after a class. XCLASS is used for classes that cannot be represented just by a bit map. This includes negated single high-valued characters. The length in PRIV(OP_lengths)[] is zero; the actual length is stored in the compiled code, so we must update "code" here. */ #if defined SUPPORT_UTF || PCRE2_CODE_UNIT_WIDTH != 8 case OP_XCLASS: ccode = code += GET(code, 1); goto CHECK_CLASS_REPEAT; #endif case OP_CLASS: case OP_NCLASS: ccode = code + PRIV(OP_lengths)[OP_CLASS]; #if defined SUPPORT_UTF || PCRE2_CODE_UNIT_WIDTH != 8 CHECK_CLASS_REPEAT: #endif switch (*ccode) { case OP_CRSTAR: /* These could be empty; continue */ case OP_CRMINSTAR: case OP_CRQUERY: case OP_CRMINQUERY: case OP_CRPOSSTAR: case OP_CRPOSQUERY: break; default: /* Non-repeat => class must match */ case OP_CRPLUS: /* These repeats aren't empty */ case OP_CRMINPLUS: case OP_CRPOSPLUS: return FALSE; case OP_CRRANGE: case OP_CRMINRANGE: case OP_CRPOSRANGE: if (GET2(ccode, 1) > 0) return FALSE; /* Minimum > 0 */ break; } break; /* Opcodes that must match a character */ case OP_ANY: case OP_ALLANY: case OP_ANYBYTE: case OP_PROP: case OP_NOTPROP: case OP_ANYNL: case OP_NOT_HSPACE: case OP_HSPACE: case OP_NOT_VSPACE: case OP_VSPACE: case OP_EXTUNI: case OP_NOT_DIGIT: case OP_DIGIT: case OP_NOT_WHITESPACE: case OP_WHITESPACE: case OP_NOT_WORDCHAR: case OP_WORDCHAR: case OP_CHAR: case OP_CHARI: case OP_NOT: case OP_NOTI: case OP_PLUS: case OP_PLUSI: case OP_MINPLUS: case OP_MINPLUSI: case OP_NOTPLUS: case OP_NOTPLUSI: case OP_NOTMINPLUS: case OP_NOTMINPLUSI: case OP_POSPLUS: case OP_POSPLUSI: case OP_NOTPOSPLUS: case OP_NOTPOSPLUSI: case OP_EXACT: case OP_EXACTI: case OP_NOTEXACT: case OP_NOTEXACTI: case OP_TYPEPLUS: case OP_TYPEMINPLUS: case OP_TYPEPOSPLUS: case OP_TYPEEXACT: return FALSE; /* These are going to continue, as they may be empty, but we have to fudge the length for the \p and \P cases. */ case OP_TYPESTAR: case OP_TYPEMINSTAR: case OP_TYPEPOSSTAR: case OP_TYPEQUERY: case OP_TYPEMINQUERY: case OP_TYPEPOSQUERY: if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; break; /* Same for these */ case OP_TYPEUPTO: case OP_TYPEMINUPTO: case OP_TYPEPOSUPTO: if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; break; /* End of branch */ case OP_KET: case OP_KETRMAX: case OP_KETRMIN: case OP_KETRPOS: case OP_ALT: return TRUE; /* In UTF-8 or UTF-16 mode, STAR, MINSTAR, POSSTAR, QUERY, MINQUERY, POSQUERY, UPTO, MINUPTO, and POSUPTO and their caseless and negative versions may be followed by a multibyte character. */ #ifdef MAYBE_UTF_MULTI case OP_STAR: case OP_STARI: case OP_NOTSTAR: case OP_NOTSTARI: case OP_MINSTAR: case OP_MINSTARI: case OP_NOTMINSTAR: case OP_NOTMINSTARI: case OP_POSSTAR: case OP_POSSTARI: case OP_NOTPOSSTAR: case OP_NOTPOSSTARI: case OP_QUERY: case OP_QUERYI: case OP_NOTQUERY: case OP_NOTQUERYI: case OP_MINQUERY: case OP_MINQUERYI: case OP_NOTMINQUERY: case OP_NOTMINQUERYI: case OP_POSQUERY: case OP_POSQUERYI: case OP_NOTPOSQUERY: case OP_NOTPOSQUERYI: if (utf && HAS_EXTRALEN(code[1])) code += GET_EXTRALEN(code[1]); break; case OP_UPTO: case OP_UPTOI: case OP_NOTUPTO: case OP_NOTUPTOI: case OP_MINUPTO: case OP_MINUPTOI: case OP_NOTMINUPTO: case OP_NOTMINUPTOI: case OP_POSUPTO: case OP_POSUPTOI: case OP_NOTPOSUPTO: case OP_NOTPOSUPTOI: if (utf && HAS_EXTRALEN(code[1 + IMM2_SIZE])) code += GET_EXTRALEN(code[1 + IMM2_SIZE]); break; #endif /* MAYBE_UTF_MULTI */ /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument string. */ case OP_MARK: case OP_PRUNE_ARG: case OP_SKIP_ARG: case OP_THEN_ARG: code += code[1]; break; /* None of the remaining opcodes are required to match a character. */ default: break; } } return TRUE; } /************************************************* * Scan compiled regex for non-emptiness * *************************************************/ /* This function is called to check for left recursive calls. We want to check the current branch of the current pattern to see if it could match the empty string. If it could, we must look outwards for branches at other levels, stopping when we pass beyond the bracket which is the subject of the recursion. This function is called only during the real compile, not during the pre-compile. Arguments: code points to start of the recursion endcode points to where to stop (current RECURSE item) bcptr points to the chain of current (unclosed) branch starts utf TRUE if in UTF mode cb compile data Returns: TRUE if what is matched could be empty */ static BOOL could_be_empty(PCRE2_SPTR code, PCRE2_SPTR endcode, branch_chain *bcptr, BOOL utf, compile_block *cb) { while (bcptr != NULL && bcptr->current_branch >= code) { if (!could_be_empty_branch(bcptr->current_branch, endcode, utf, cb, NULL)) return FALSE; bcptr = bcptr->outer; } return TRUE; } /************************************************* * Expand the workspace * *************************************************/ /* This function is called during the second compiling phase, if the number of forward references fills the existing workspace, which is originally a block on the stack. A larger block is obtained from the heap unless the ultimate limit has been reached or the increase will be rather small. Argument: pointer to the compile data block Returns: 0 if all went well, else an error number */ static int expand_workspace(compile_block *cb) { PCRE2_UCHAR *newspace; int newsize = cb->workspace_size * 2; if (newsize > COMPILE_WORK_SIZE_MAX) newsize = COMPILE_WORK_SIZE_MAX; if (cb->workspace_size >= COMPILE_WORK_SIZE_MAX || newsize - cb->workspace_size < WORK_SIZE_SAFETY_MARGIN) return ERR72; newspace = cb->cx->memctl.malloc(CU2BYTES(newsize), cb->cx->memctl.memory_data); if (newspace == NULL) return ERR21; memcpy(newspace, cb->start_workspace, cb->workspace_size * sizeof(PCRE2_UCHAR)); cb->hwm = (PCRE2_UCHAR *)newspace + (cb->hwm - cb->start_workspace); if (cb->workspace_size > COMPILE_WORK_SIZE) cb->cx->memctl.free((void *)cb->start_workspace, cb->cx->memctl.memory_data); cb->start_workspace = newspace; cb->workspace_size = newsize; return 0; } /************************************************* * Check for counted repeat * *************************************************/ /* This function is called when a '{' is encountered in a place where it might start a quantifier. It looks ahead to see if it really is a quantifier, that is, one of the forms {ddd} {ddd,} or {ddd,ddd} where the ddds are digits. Argument: pointer to the first char after '{' Returns: TRUE or FALSE */ static BOOL is_counted_repeat(PCRE2_SPTR p) { if (!IS_DIGIT(*p)) return FALSE; p++; while (IS_DIGIT(*p)) p++; if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE; if (*p++ != CHAR_COMMA) return FALSE; if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE; if (!IS_DIGIT(*p)) return FALSE; p++; while (IS_DIGIT(*p)) p++; return (*p == CHAR_RIGHT_CURLY_BRACKET); } /************************************************* * Handle escapes * *************************************************/ /* This function is called when a \ has been encountered. It either returns a positive value for a simple escape such as \d, or 0 for a data character, which is placed in chptr. A backreference to group n is returned as negative n. On entry, ptr is pointing at the \. On exit, it points the final code unit of the escape sequence. Arguments: ptrptr points to the pattern position pointer chptr points to a returned data character errorcodeptr points to the errorcode variable (containing zero) options the current options bits isclass TRUE if inside a character class cb compile data block Returns: zero => a data character positive => a special escape sequence negative => a back reference on error, errorcodeptr is set non-zero */ static int check_escape(PCRE2_SPTR *ptrptr, uint32_t *chptr, int *errorcodeptr, int options, BOOL isclass, compile_block *cb) { BOOL utf = (options & PCRE2_UTF) != 0; PCRE2_SPTR ptr = *ptrptr + 1; register uint32_t c, cc; int escape = 0; int i; GETCHARINCTEST(c, ptr); /* Get character value, increment pointer */ ptr--; /* Set pointer back to the last code unit */ /* If backslash is at the end of the pattern, it's an error. */ if (c == CHAR_NULL && ptr >= cb->end_pattern) *errorcodeptr = ERR1; /* Non-alphanumerics are literals, so we just leave the value in c. An initial value test saves a memory lookup for code points outside the alphanumeric range. Otherwise, do a table lookup. A non-zero result is something that can be returned immediately. Otherwise further processing is required. */ else if (c < ESCAPES_FIRST || c > ESCAPES_LAST) {} /* Definitely literal */ else if ((i = escapes[c - ESCAPES_FIRST]) != 0) { if (i > 0) c = (uint32_t)i; /* Positive is a data character */ else escape = -i; /* Else return a special escape */ } /* Escapes that need further processing, including those that are unknown. */ else { PCRE2_SPTR oldptr; BOOL braced, negated, overflow; unsigned int s; switch (c) { /* A number of Perl escapes are not handled by PCRE. We give an explicit error. */ case CHAR_l: case CHAR_L: *errorcodeptr = ERR37; break; /* \u is unrecognized when PCRE2_ALT_BSUX is not set. When it is treated specially, \u must be followed by four hex digits. Otherwise it is a lowercase u letter. */ case CHAR_u: if ((options & PCRE2_ALT_BSUX) == 0) *errorcodeptr = ERR37; else { uint32_t xc; if ((cc = XDIGIT(ptr[1])) == 0xff) break; /* Not a hex digit */ if ((xc = XDIGIT(ptr[2])) == 0xff) break; /* Not a hex digit */ cc = (cc << 4) | xc; if ((xc = XDIGIT(ptr[3])) == 0xff) break; /* Not a hex digit */ cc = (cc << 4) | xc; if ((xc = XDIGIT(ptr[4])) == 0xff) break; /* Not a hex digit */ c = (cc << 4) | xc; ptr += 4; if (utf) { if (c > 0x10ffffU) *errorcodeptr = ERR77; else if (c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73; } else if (c > MAX_NON_UTF_CHAR) *errorcodeptr = ERR77; } break; case CHAR_U: /* \U is unrecognized unless PCRE2_ALT_BSUX is set, in which case it is an upper case letter. */ if ((options & PCRE2_ALT_BSUX) == 0) *errorcodeptr = ERR37; break; /* In a character class, \g is just a literal "g". Outside a character class, \g must be followed by one of a number of specific things: (1) A number, either plain or braced. If positive, it is an absolute backreference. If negative, it is a relative backreference. This is a Perl 5.10 feature. (2) Perl 5.10 also supports \g{name} as a reference to a named group. This is part of Perl's movement towards a unified syntax for back references. As this is synonymous with \k{name}, we fudge it up by pretending it really was \k. (3) For Oniguruma compatibility we also support \g followed by a name or a number either in angle brackets or in single quotes. However, these are (possibly recursive) subroutine calls, _not_ backreferences. Just return the ESC_g code (cf \k). */ case CHAR_g: if (isclass) break; if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE) { escape = ESC_g; break; } /* Handle the Perl-compatible cases */ if (ptr[1] == CHAR_LEFT_CURLY_BRACKET) { PCRE2_SPTR p; for (p = ptr+2; *p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET; p++) if (*p != CHAR_MINUS && !IS_DIGIT(*p)) break; if (*p != CHAR_NULL && *p != CHAR_RIGHT_CURLY_BRACKET) { escape = ESC_k; break; } braced = TRUE; ptr++; } else braced = FALSE; if (ptr[1] == CHAR_MINUS) { negated = TRUE; ptr++; } else negated = FALSE; /* The integer range is limited by the machine's int representation. */ s = 0; overflow = FALSE; while (IS_DIGIT(ptr[1])) { if (s > INT_MAX / 10 - 1) /* Integer overflow */ { overflow = TRUE; break; } s = s * 10 + (int)(*(++ptr) - CHAR_0); } if (overflow) /* Integer overflow */ { while (IS_DIGIT(ptr[1])) ptr++; *errorcodeptr = ERR61; break; } if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET) { *errorcodeptr = ERR57; break; } if (s == 0) { *errorcodeptr = ERR58; break; } if (negated) { if (s > cb->bracount) { *errorcodeptr = ERR15; break; } s = cb->bracount - (s - 1); } escape = -s; break; /* The handling of escape sequences consisting of a string of digits starting with one that is not zero is not straightforward. Perl has changed over the years. Nowadays \g{} for backreferences and \o{} for octal are recommended to avoid the ambiguities in the old syntax. Outside a character class, the digits are read as a decimal number. If the number is less than 10, or if there are that many previous extracting left brackets, it is a back reference. Otherwise, up to three octal digits are read to form an escaped byte. Thus \123 is likely to be octal 123 (cf \0123, which is octal 012 followed by the literal 3). If the octal value is greater than 377, the least significant 8 bits are taken. Inside a character class, \ followed by a digit is always either a literal 8 or 9 or an octal number. */ case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5: case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9: if (!isclass) { oldptr = ptr; /* The integer range is limited by the machine's int representation. */ s = (int)(c - CHAR_0); overflow = FALSE; while (IS_DIGIT(ptr[1])) { if (s > INT_MAX / 10 - 1) /* Integer overflow */ { overflow = TRUE; break; } s = s * 10 + (int)(*(++ptr) - CHAR_0); } if (overflow) /* Integer overflow */ { while (IS_DIGIT(ptr[1])) ptr++; *errorcodeptr = ERR61; break; } if (s < 10 || s <= cb->bracount) /* Check for back reference */ { escape = -s; break; } ptr = oldptr; /* Put the pointer back and fall through */ } /* Handle a digit following \ when the number is not a back reference. If the first digit is 8 or 9, Perl used to generate a binary zero byte and then treat the digit as a following literal. At least by Perl 5.18 this changed so as not to insert the binary zero. */ if ((c = *ptr) >= CHAR_8) break; /* Fall through with a digit less than 8 */ /* \0 always starts an octal number, but we may drop through to here with a larger first octal digit. The original code used just to take the least significant 8 bits of octal numbers (I think this is what early Perls used to do). Nowadays we allow for larger numbers in UTF-8 mode and 16-bit mode, but no more than 3 octal digits. */ case CHAR_0: c -= CHAR_0; while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7) c = c * 8 + *(++ptr) - CHAR_0; #if PCRE2_CODE_UNIT_WIDTH == 8 if (!utf && c > 0xff) *errorcodeptr = ERR51; #endif break; /* \o is a relatively new Perl feature, supporting a more general way of specifying character codes in octal. The only supported form is \o{ddd}. */ case CHAR_o: if (ptr[1] != CHAR_LEFT_CURLY_BRACKET) *errorcodeptr = ERR55; else if (ptr[2] == CHAR_RIGHT_CURLY_BRACKET) *errorcodeptr = ERR78; else { ptr += 2; c = 0; overflow = FALSE; while (*ptr >= CHAR_0 && *ptr <= CHAR_7) { cc = *ptr++; if (c == 0 && cc == CHAR_0) continue; /* Leading zeroes */ #if PCRE2_CODE_UNIT_WIDTH == 32 if (c >= 0x20000000l) { overflow = TRUE; break; } #endif c = (c << 3) + cc - CHAR_0 ; #if PCRE2_CODE_UNIT_WIDTH == 8 if (c > (utf ? 0x10ffffU : 0xffU)) { overflow = TRUE; break; } #elif PCRE2_CODE_UNIT_WIDTH == 16 if (c > (utf ? 0x10ffffU : 0xffffU)) { overflow = TRUE; break; } #elif PCRE2_CODE_UNIT_WIDTH == 32 if (utf && c > 0x10ffffU) { overflow = TRUE; break; } #endif } if (overflow) { while (*ptr >= CHAR_0 && *ptr <= CHAR_7) ptr++; *errorcodeptr = ERR34; } else if (*ptr == CHAR_RIGHT_CURLY_BRACKET) { if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73; } else *errorcodeptr = ERR64; } break; /* \x is complicated. When PCRE2_ALT_BSUX is set, \x must be followed by two hexadecimal digits. Otherwise it is a lowercase x letter. */ case CHAR_x: if ((options & PCRE2_ALT_BSUX) != 0) { uint32_t xc; if ((cc = XDIGIT(ptr[1])) == 0xff) break; /* Not a hex digit */ if ((xc = XDIGIT(ptr[2])) == 0xff) break; /* Not a hex digit */ c = (cc << 4) | xc; ptr += 2; } /* End PCRE2_ALT_BSUX handling */ /* Handle \x in Perl's style. \x{ddd} is a character number which can be greater than 0xff in UTF-8 or non-8bit mode, but only if the ddd are hex digits. If not, { used to be treated as a data character. However, Perl seems to read hex digits up to the first non-such, and ignore the rest, so that, for example \x{zz} matches a binary zero. This seems crazy, so PCRE now gives an error. */ else { if (ptr[1] == CHAR_LEFT_CURLY_BRACKET) { ptr += 2; if (*ptr == CHAR_RIGHT_CURLY_BRACKET) { *errorcodeptr = ERR78; break; } c = 0; overflow = FALSE; while ((cc = XDIGIT(*ptr)) != 0xff) { ptr++; if (c == 0 && cc == 0) continue; /* Leading zeroes */ #if PCRE2_CODE_UNIT_WIDTH == 32 if (c >= 0x10000000l) { overflow = TRUE; break; } #endif c = (c << 4) | cc; if ((utf && c > 0x10ffffU) || (!utf && c > MAX_NON_UTF_CHAR)) { overflow = TRUE; break; } } if (overflow) { while (XDIGIT(*ptr) != 0xff) ptr++; *errorcodeptr = ERR34; } else if (*ptr == CHAR_RIGHT_CURLY_BRACKET) { if (utf && c >= 0xd800 && c <= 0xdfff) *errorcodeptr = ERR73; } /* If the sequence of hex digits does not end with '}', give an error. We used just to recognize this construct and fall through to the normal \x handling, but nowadays Perl gives an error, which seems much more sensible, so we do too. */ else *errorcodeptr = ERR67; } /* End of \x{} processing */ /* Read a single-byte hex-defined char (up to two hex digits after \x) */ else { c = 0; if ((cc = XDIGIT(ptr[1])) == 0xff) break; /* Not a hex digit */ ptr++; c = cc; if ((cc = XDIGIT(ptr[1])) == 0xff) break; /* Not a hex digit */ ptr++; c = (c << 4) | cc; } /* End of \xdd handling */ } /* End of Perl-style \x handling */ break; /* For \c, a following letter is upper-cased; then the 0x40 bit is flipped. An error is given if the byte following \c is not a printable ASCII character. This coding is ASCII-specific, but then the whole concept of \cx is ASCII-specific. (However, an EBCDIC equivalent has now been added.) */ case CHAR_c: c = *(++ptr); if (c == CHAR_NULL && ptr >= cb->end_pattern) { *errorcodeptr = ERR2; break; } #ifndef EBCDIC /* ASCII/UTF-8 coding */ if (c < 32 || c > 126) /* Excludes all non-printable ASCII */ { *errorcodeptr = ERR68; break; } if (c >= CHAR_a && c <= CHAR_z) c -= 32; c ^= 0x40; #else /* EBCDIC coding */ if (c >= CHAR_a && c <= CHAR_z) c += 64; c ^= 0xC0; #endif break; /* Any other alphanumeric following \ is an error. Perl gives an error only if in warning mode, but PCRE doesn't have a warning mode. */ default: *errorcodeptr = ERR3; break; } } /* Perl supports \N{name} for character names, as well as plain \N for "not newline". PCRE does not support \N{name}. However, it does support quantification such as \N{2,3}. */ if (escape == ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET && !is_counted_repeat(ptr+2)) *errorcodeptr = ERR37; /* If PCRE2_UCP is set, we change the values for \d etc. */ if ((options & PCRE2_UCP) != 0 && escape >= ESC_D && escape <= ESC_w) escape += (ESC_DU - ESC_D); /* Set the pointer to the final character before returning. */ *ptrptr = ptr; *chptr = c; return escape; } #ifdef SUPPORT_UTF /************************************************* * Handle \P and \p * *************************************************/ /* This function is called after \P or \p has been encountered, provided that PCRE2 is compiled with support for UTF and Unicode properties. On entry, the contents of ptrptr are pointing at the P or p. On exit, it is left pointing at the final code unit of the escape sequence. Arguments: ptrptr the pattern position pointer negptr a boolean that is set TRUE for negation else FALSE ptypeptr an unsigned int that is set to the type value pdataptr an unsigned int that is set to the detailed property value errorcodeptr the error code variable cb the compile data Returns: TRUE if the type value was found, or FALSE for an invalid type */ static BOOL get_ucp(PCRE2_SPTR *ptrptr, BOOL *negptr, unsigned int *ptypeptr, unsigned int *pdataptr, int *errorcodeptr, compile_block *cb) { register PCRE2_UCHAR c; int i, bot, top; PCRE2_SPTR ptr = *ptrptr; PCRE2_UCHAR name[32]; *negptr = FALSE; c = *(++ptr); /* \P or \p can be followed by a name in {}, optionally preceded by ^ for negation. */ if (c == CHAR_LEFT_CURLY_BRACKET) { if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT) { *negptr = TRUE; ptr++; } for (i = 0; i < (int)(sizeof(name) / sizeof(PCRE2_UCHAR)) - 1; i++) { c = *(++ptr); if (c == CHAR_NULL) goto ERROR_RETURN; if (c == CHAR_RIGHT_CURLY_BRACKET) break; name[i] = c; } if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN; name[i] = 0; } /* Otherwise there is just one following character, which must be an ASCII letter. */ else if (MAX_255(c) && (cb->ctypes[c] & ctype_letter) != 0) { name[0] = c; name[1] = 0; } else goto ERROR_RETURN; *ptrptr = ptr; /* Search for a recognized property name using binary chop. */ bot = 0; top = PRIV(utt_size); while (bot < top) { int r; i = (bot + top) >> 1; r = PRIV(strcmp_c8)(name, PRIV(utt_names) + PRIV(utt)[i].name_offset); if (r == 0) { *ptypeptr = PRIV(utt)[i].type; *pdataptr = PRIV(utt)[i].value; return TRUE; } if (r > 0) bot = i + 1; else top = i; } *errorcodeptr = ERR47; /* Unrecognized name */ return FALSE; ERROR_RETURN: /* Malformed \P or \p */ *errorcodeptr = ERR46; *ptrptr = ptr; return FALSE; } #endif /************************************************* * Read repeat counts * *************************************************/ /* Read an item of the form {n,m} and return the values. This is called only after is_counted_repeat() has confirmed that a repeat-count quantifier exists, so the syntax is guaranteed to be correct, but we need to check the values. Arguments: p pointer to first char after '{' minp pointer to int for min maxp pointer to int for max returned as -1 if no max errorcodeptr points to error code variable Returns: pointer to '}' on success; current ptr on error, with errorcodeptr set non-zero */ static PCRE2_SPTR read_repeat_counts(PCRE2_SPTR p, int *minp, int *maxp, int *errorcodeptr) { int min = 0; int max = -1; while (IS_DIGIT(*p)) { min = min * 10 + (int)(*p++ - CHAR_0); if (min > 65535) { *errorcodeptr = ERR5; return p; } } if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else { if (*(++p) != CHAR_RIGHT_CURLY_BRACKET) { max = 0; while(IS_DIGIT(*p)) { max = max * 10 + (int)(*p++ - CHAR_0); if (max > 65535) { *errorcodeptr = ERR5; return p; } } if (max < min) { *errorcodeptr = ERR4; return p; } } } *minp = min; *maxp = max; return p; } /************************************************* * Scan compiled regex for specific bracket * *************************************************/ /* This function scans through a compiled pattern until it finds a capturing bracket with the given number, or, if the number is negative, an instance of OP_REVERSE for a lookbehind. The function is global in the C sense so that it can be called from pcre2_study() when finding the minimum matching length. Arguments: code points to start of expression utf TRUE in UTF mode number the required bracket number or negative to find a lookbehind Returns: pointer to the opcode for the bracket, or NULL if not found */ PCRE2_SPTR PRIV(find_bracket)(PCRE2_SPTR code, BOOL utf, int number) { for (;;) { register PCRE2_UCHAR c = *code; if (c == OP_END) return NULL; /* XCLASS is used for classes that cannot be represented just by a bit map. This includes negated single high-valued characters. The length in the table is zero; the actual length is stored in the compiled code. */ if (c == OP_XCLASS) code += GET(code, 1); /* Handle recursion */ else if (c == OP_REVERSE) { if (number < 0) return (PCRE2_UCHAR *)code; code += PRIV(OP_lengths)[c]; } /* Handle capturing bracket */ else if (c == OP_CBRA || c == OP_SCBRA || c == OP_CBRAPOS || c == OP_SCBRAPOS) { int n = (int)GET2(code, 1+LINK_SIZE); if (n == number) return (PCRE2_UCHAR *)code; code += PRIV(OP_lengths)[c]; } /* Otherwise, we can get the item's length from the table, except that for repeated character types, we have to test for \p and \P, which have an extra two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we must add in its length. */ else { switch(c) { case OP_TYPESTAR: case OP_TYPEMINSTAR: case OP_TYPEPLUS: case OP_TYPEMINPLUS: case OP_TYPEQUERY: case OP_TYPEMINQUERY: case OP_TYPEPOSSTAR: case OP_TYPEPOSPLUS: case OP_TYPEPOSQUERY: if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; break; case OP_TYPEUPTO: case OP_TYPEMINUPTO: case OP_TYPEEXACT: case OP_TYPEPOSUPTO: if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; break; case OP_MARK: case OP_PRUNE_ARG: case OP_SKIP_ARG: case OP_THEN_ARG: code += code[1]; break; } /* Add in the fixed length from the table */ code += PRIV(OP_lengths)[c]; /* In UTF-8 and UTF-16 modes, opcodes that are followed by a character may be followed by a multi-byte character. The length in the table is a minimum, so we have to arrange to skip the extra bytes. */ #ifdef MAYBE_UTF_MULTI if (utf) switch(c) { case OP_CHAR: case OP_CHARI: case OP_EXACT: case OP_EXACTI: case OP_UPTO: case OP_UPTOI: case OP_MINUPTO: case OP_MINUPTOI: case OP_POSUPTO: case OP_POSUPTOI: case OP_STAR: case OP_STARI: case OP_MINSTAR: case OP_MINSTARI: case OP_POSSTAR: case OP_POSSTARI: case OP_PLUS: case OP_PLUSI: case OP_MINPLUS: case OP_MINPLUSI: case OP_POSPLUS: case OP_POSPLUSI: case OP_QUERY: case OP_QUERYI: case OP_MINQUERY: case OP_MINQUERYI: case OP_POSQUERY: case OP_POSQUERYI: if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]); break; } #else (void)(utf); /* Keep compiler happy by referencing function argument */ #endif /* MAYBE_UTF_MULTI */ } } } /************************************************* * Scan compiled regex for recursion reference * *************************************************/ /* This function scans through a compiled pattern until it finds an instance of OP_RECURSE. Arguments: code points to start of expression utf TRUE in UTF mode Returns: pointer to the opcode for OP_RECURSE, or NULL if not found */ static PCRE2_SPTR find_recurse(PCRE2_SPTR code, BOOL utf) { for (;;) { register PCRE2_UCHAR c = *code; if (c == OP_END) return NULL; if (c == OP_RECURSE) return code; /* XCLASS is used for classes that cannot be represented just by a bit map. This includes negated single high-valued characters. The length in the table is zero; the actual length is stored in the compiled code. */ if (c == OP_XCLASS) code += GET(code, 1); /* Otherwise, we can get the item's length from the table, except that for repeated character types, we have to test for \p and \P, which have an extra two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we must add in its length. */ else { switch(c) { case OP_TYPESTAR: case OP_TYPEMINSTAR: case OP_TYPEPLUS: case OP_TYPEMINPLUS: case OP_TYPEQUERY: case OP_TYPEMINQUERY: case OP_TYPEPOSSTAR: case OP_TYPEPOSPLUS: case OP_TYPEPOSQUERY: if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2; break; case OP_TYPEPOSUPTO: case OP_TYPEUPTO: case OP_TYPEMINUPTO: case OP_TYPEEXACT: if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP) code += 2; break; case OP_MARK: case OP_PRUNE_ARG: case OP_SKIP_ARG: case OP_THEN_ARG: code += code[1]; break; } /* Add in the fixed length from the table */ code += PRIV(OP_lengths)[c]; /* In UTF-8 and UTF-16 modes, opcodes that are followed by a character may be followed by a multi-unit character. The length in the table is a minimum, so we have to arrange to skip the extra units. */ #ifdef MAYBE_UTF_MULTI if (utf) switch(c) { case OP_CHAR: case OP_CHARI: case OP_NOT: case OP_NOTI: case OP_EXACT: case OP_EXACTI: case OP_NOTEXACT: case OP_NOTEXACTI: case OP_UPTO: case OP_UPTOI: case OP_NOTUPTO: case OP_NOTUPTOI: case OP_MINUPTO: case OP_MINUPTOI: case OP_NOTMINUPTO: case OP_NOTMINUPTOI: case OP_POSUPTO: case OP_POSUPTOI: case OP_NOTPOSUPTO: case OP_NOTPOSUPTOI: case OP_STAR: case OP_STARI: case OP_NOTSTAR: case OP_NOTSTARI: case OP_MINSTAR: case OP_MINSTARI: case OP_NOTMINSTAR: case OP_NOTMINSTARI: case OP_POSSTAR: case OP_POSSTARI: case OP_NOTPOSSTAR: case OP_NOTPOSSTARI: case OP_PLUS: case OP_PLUSI: case OP_NOTPLUS: case OP_NOTPLUSI: case OP_MINPLUS: case OP_MINPLUSI: case OP_NOTMINPLUS: case OP_NOTMINPLUSI: case OP_POSPLUS: case OP_POSPLUSI: case OP_NOTPOSPLUS: case OP_NOTPOSPLUSI: case OP_QUERY: case OP_QUERYI: case OP_NOTQUERY: case OP_NOTQUERYI: case OP_MINQUERY: case OP_MINQUERYI: case OP_NOTMINQUERY: case OP_NOTMINQUERYI: case OP_POSQUERY: case OP_POSQUERYI: case OP_NOTPOSQUERY: case OP_NOTPOSQUERYI: if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]); break; } #else (void)(utf); /* Keep compiler happy by referencing function argument */ #endif /* MAYBE_UTF_MULTI */ } } } /************************************************* * Adjust OP_RECURSE items in repeated group * *************************************************/ /* OP_RECURSE items contain an offset from the start of the regex to the group that is referenced. This means that groups can be replicated for fixed repetition simply by copying (because the recursion is allowed to refer to earlier groups that are outside the current group). However, when a group is optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is inserted before it, after it has been compiled. This means that any OP_RECURSE items within it that refer to the group itself or any contained groups have to have their offsets adjusted. That is one of the jobs of this function. Before it is called, the partially compiled regex must be temporarily terminated with OP_END. This function has been extended with the possibility of forward references for recursions and subroutine calls. It must also check the list of such references for the group we are dealing with. If it finds that one of the recursions in the current group is on this list, it adjusts the offset in the list, not the value in the reference (which is a group number). Arguments: group points to the start of the group adjust the amount by which the group is to be moved utf TRUE in UTF mode cb compile data save_hwm the hwm forward reference pointer at the start of the group Returns: nothing */ static void adjust_recurse(PCRE2_UCHAR *group, int adjust, BOOL utf, compile_block *cb, PCRE2_UCHAR *save_hwm) { PCRE2_UCHAR *ptr = group; while ((ptr = (PCRE2_UCHAR *)find_recurse(ptr, utf)) != NULL) { int offset; PCRE2_UCHAR *hc; /* See if this recursion is on the forward reference list. If so, adjust the reference. */ for (hc = save_hwm; hc < cb->hwm; hc += LINK_SIZE) { offset = (int)GET(hc, 0); if (cb->start_code + offset == ptr + 1) { PUT(hc, 0, offset + adjust); break; } } /* Otherwise, adjust the recursion offset if it's after the start of this group. */ if (hc >= cb->hwm) { offset = (int)GET(ptr, 1); if (cb->start_code + offset >= group) PUT(ptr, 1, offset + adjust); } ptr += 1 + LINK_SIZE; } } /************************************************* * Check for POSIX class syntax * *************************************************/ /* This function is called when the sequence "[:" or "[." or "[=" is encountered in a character class. It checks whether this is followed by a sequence of characters terminated by a matching ":]" or ".]" or "=]". If we reach an unescaped ']' without the special preceding character, return FALSE. Originally, this function only recognized a sequence of letters between the terminators, but it seems that Perl recognizes any sequence of characters, though of course unknown POSIX names are subsequently rejected. Perl gives an "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE didn't consider this to be a POSIX class. Likewise for [:1234:]. The problem in trying to be exactly like Perl is in the handling of escapes. We have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code below handles the special case of \], but does not try to do any other escape processing. This makes it different from Perl for cases such as [:l\ower:] where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize "l\ower". This is a lesser evil than not diagnosing bad classes when Perl does, I think. A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not. It seems that the appearance of a nested POSIX class supersedes an apparent external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or a digit. In Perl, unescaped square brackets may also appear as part of class names. For example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for [:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not seem right at all. PCRE does not allow closing square brackets in POSIX class names. Arguments: ptr pointer to the initial [ endptr where to return a pointer to the terminating ':', '.', or '=' Returns: TRUE or FALSE */ static BOOL check_posix_syntax(PCRE2_SPTR ptr, PCRE2_SPTR *endptr) { PCRE2_UCHAR terminator; /* Don't combine these lines; the Solaris cc */ terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */ for (++ptr; *ptr != CHAR_NULL; ptr++) { if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) ptr++; else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE; else { if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) { *endptr = ptr; return TRUE; } if (*ptr == CHAR_LEFT_SQUARE_BRACKET && (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, endptr)) return FALSE; } } return FALSE; } /************************************************* * Check POSIX class name * *************************************************/ /* This function is called to check the name given in a POSIX-style class entry such as [:alnum:]. Arguments: ptr points to the first letter len the length of the name Returns: a value representing the name, or -1 if unknown */ static int check_posix_name(PCRE2_SPTR ptr, int len) { const char *pn = posix_names; register int yield = 0; while (posix_name_lengths[yield] != 0) { if (len == posix_name_lengths[yield] && PRIV(strncmp_c8)(ptr, pn, (unsigned int)len) == 0) return yield; pn += posix_name_lengths[yield] + 1; yield++; } return -1; } #ifdef SUPPORT_UTF /************************************************* * Get othercase range * *************************************************/ /* This function is passed the start and end of a class range in UCT mode. It searches up the characters, looking for ranges of characters in the "other" case. Each call returns the next one, updating the start address. A character with multiple other cases is returned on its own with a special return value. Arguments: cptr points to starting character value; updated d end value ocptr where to put start of othercase range odptr where to put end of othercase range Yield: -1 when no more 0 when a range is returned >0 the CASESET offset for char with multiple other cases in this case, ocptr contains the original */ static int get_othercase_range(uint32_t *cptr, uint32_t d, uint32_t *ocptr, uint32_t *odptr) { uint32_t c, othercase, next; unsigned int co; /* Find the first character that has an other case. If it has multiple other cases, return its case offset value. */ for (c = *cptr; c <= d; c++) { if ((co = UCD_CASESET(c)) != 0) { *ocptr = c++; /* Character that has the set */ *cptr = c; /* Rest of input range */ return (int)co; } if ((othercase = UCD_OTHERCASE(c)) != c) break; } if (c > d) return -1; /* Reached end of range */ /* Found a character that has a single other case. Search for the end of the range, which is either the end of the input range, or a character that has zero or more than one other cases. */ *ocptr = othercase; next = othercase + 1; for (++c; c <= d; c++) { if ((co = UCD_CASESET(c)) != 0 || UCD_OTHERCASE(c) != next) break; next++; } *odptr = next - 1; /* End of othercase range */ *cptr = c; /* Rest of input range */ return 0; } #endif /* SUPPORT_UTF */ /************************************************* * Add a character or range to a class * *************************************************/ /* This function packages up the logic of adding a character or range of characters to a class. The character values in the arguments will be within the valid values for the current mode (8-bit, 16-bit, UTF, etc). This function is mutually recursive with the function immediately below. Arguments: classbits the bit map for characters < 256 uchardptr points to the pointer for extra data options the options word cb compile data start start of range character end end of range character Returns: the number of < 256 characters added the pointer to extra data is updated */ static int add_to_class(uint8_t *classbits, PCRE2_UCHAR **uchardptr, int options, compile_block *cb, uint32_t start, uint32_t end) { uint32_t c; uint32_t classbits_end = (end <= 0xff ? end : 0xff); int n8 = 0; /* If caseless matching is required, scan the range and process alternate cases. In Unicode, there are 8-bit characters that have alternate cases that are greater than 255 and vice-versa. Sometimes we can just extend the original range. */ if ((options & PCRE2_CASELESS) != 0) { #ifdef SUPPORT_UTF if ((options & PCRE2_UTF) != 0) { int rc; uint32_t oc, od; options &= ~PCRE2_CASELESS; /* Remove for recursive calls */ c = start; while ((rc = get_othercase_range(&c, end, &oc, &od)) >= 0) { /* Handle a single character that has more than one other case. */ if (rc > 0) n8 += add_list_to_class(classbits, uchardptr, options, cb, PRIV(ucd_caseless_sets) + rc, oc); /* Do nothing if the other case range is within the original range. */ else if (oc >= start && od <= end) continue; /* Extend the original range if there is overlap, noting that if oc < c, we can't have od > end because a subrange is always shorter than the basic range. Otherwise, use a recursive call to add the additional range. */ else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */ else if (od > end && oc <= end + 1) end = od; /* Extend upwards */ else n8 += add_to_class(classbits, uchardptr, options, cb, oc, od); } } else #endif /* SUPPORT_UTF */ /* Not UTF mode */ for (c = start; c <= classbits_end; c++) { SETBIT(classbits, cb->fcc[c]); n8++; } } /* Now handle the original range. Adjust the final value according to the bit length - this means that the same lists of (e.g.) horizontal spaces can be used in all cases. */ if ((options & PCRE2_UTF) == 0 && end > MAX_NON_UTF_CHAR) end = MAX_NON_UTF_CHAR; /* Use the bitmap for characters < 256. Otherwise use extra data.*/ for (c = start; c <= classbits_end; c++) { /* Regardless of start, c will always be <= 255. */ SETBIT(classbits, c); n8++; } #ifdef SUPPORT_WIDE_CHARS if (start <= 0xff) start = 0xff + 1; if (end >= start) { PCRE2_UCHAR *uchardata = *uchardptr; #ifdef SUPPORT_UTF if ((options & PCRE2_UTF) != 0) { if (start < end) { *uchardata++ = XCL_RANGE; uchardata += PRIV(ord2utf)(start, uchardata); uchardata += PRIV(ord2utf)(end, uchardata); } else if (start == end) { *uchardata++ = XCL_SINGLE; uchardata += PRIV(ord2utf)(start, uchardata); } } else #endif /* SUPPORT_UTF */ /* Without UTF support, character values are constrained by the bit length, and can only be > 256 for 16-bit and 32-bit libraries. */ #if PCRE2_CODE_UNIT_WIDTH == 8 {} #else if (start < end) { *uchardata++ = XCL_RANGE; *uchardata++ = start; *uchardata++ = end; } else if (start == end) { *uchardata++ = XCL_SINGLE; *uchardata++ = start; } #endif *uchardptr = uchardata; /* Updata extra data pointer */ } #else (void)uchardptr; /* Avoid compiler warning */ #endif /* SUPPORT_WIDE_CHARS */ return n8; /* Number of 8-bit characters */ } /************************************************* * Add a list of characters to a class * *************************************************/ /* This function is used for adding a list of case-equivalent characters to a class, and also for adding a list of horizontal or vertical whitespace. If the list is in order (which it should be), ranges of characters are detected and handled appropriately. This function is mutually recursive with the function above. Arguments: classbits the bit map for characters < 256 uchardptr points to the pointer for extra data options the options word cb contains pointers to tables etc. p points to row of 32-bit values, terminated by NOTACHAR except character to omit; this is used when adding lists of case-equivalent characters to avoid including the one we already know about Returns: the number of < 256 characters added the pointer to extra data is updated */ static int add_list_to_class(uint8_t *classbits, PCRE2_UCHAR **uchardptr, int options, compile_block *cb, const uint32_t *p, unsigned int except) { int n8 = 0; while (p[0] < NOTACHAR) { int n = 0; if (p[0] != except) { while(p[n+1] == p[0] + n + 1) n++; n8 += add_to_class(classbits, uchardptr, options, cb, p[0], p[n]); } p += n + 1; } return n8; } /************************************************* * Add characters not in a list to a class * *************************************************/ /* This function is used for adding the complement of a list of horizontal or vertical whitespace to a class. The list must be in order. Arguments: classbits the bit map for characters < 256 uchardptr points to the pointer for extra data options the options word cb contains pointers to tables etc. p points to row of 32-bit values, terminated by NOTACHAR Returns: the number of < 256 characters added the pointer to extra data is updated */ static int add_not_list_to_class(uint8_t *classbits, PCRE2_UCHAR **uchardptr, int options, compile_block *cb, const uint32_t *p) { BOOL utf = (options & PCRE2_UTF) != 0; int n8 = 0; if (p[0] > 0) n8 += add_to_class(classbits, uchardptr, options, cb, 0, p[0] - 1); while (p[0] < NOTACHAR) { while (p[1] == p[0] + 1) p++; n8 += add_to_class(classbits, uchardptr, options, cb, p[0] + 1, (p[1] == NOTACHAR) ? (utf ? 0x10ffffu : 0xffffffffu) : p[1] - 1); p++; } return n8; } /************************************************* * Compile one branch * *************************************************/ /* Scan the pattern, compiling it into the a vector. If the options are changed during the branch, the pointer is used to change the external options bits. This function is used during the pre-compile phase when we are trying to find out the amount of memory needed, as well as during the real compile phase. The value of lengthptr distinguishes the two phases. Arguments: optionsptr pointer to the option bits codeptr points to the pointer to the current code point ptrptr points to the current pattern pointer errorcodeptr points to error code variable firstcuptr place to put the first required code unit firstcuflagsptr place to put the first code unit flags, or a negative number reqcuptr place to put the last required code unit reqcuflagsptr place to put the last required code unit flags, or a negative number bcptr points to current branch chain cond_depth conditional nesting depth cb contains pointers to tables etc. lengthptr NULL during the real compile phase points to length accumulator during pre-compile phase Returns: TRUE on success FALSE, with *errorcodeptr set non-zero on error */ static BOOL compile_branch(uint32_t *optionsptr, PCRE2_UCHAR **codeptr, PCRE2_SPTR *ptrptr, int *errorcodeptr, uint32_t *firstcuptr, int32_t *firstcuflagsptr, uint32_t *reqcuptr, int32_t *reqcuflagsptr, branch_chain *bcptr, int cond_depth, compile_block *cb, size_t *lengthptr) { int repeat_type, op_type; int repeat_min = 0, repeat_max = 0; /* To please picky compilers */ int bravalue = 0; int greedy_default, greedy_non_default; uint32_t firstcu, reqcu; int32_t firstcuflags, reqcuflags; uint32_t zeroreqcu, zerofirstcu; int32_t zeroreqcuflags, zerofirstcuflags; int32_t req_caseopt, reqvary, tempreqvary; int options = *optionsptr; /* May change dynamically */ int after_manual_callout = 0; int escape; size_t length_prevgroup = 0; register uint32_t c; register PCRE2_UCHAR *code = *codeptr; PCRE2_UCHAR *last_code = code; PCRE2_UCHAR *orig_code = code; PCRE2_UCHAR *tempcode; BOOL inescq = FALSE; BOOL groupsetfirstcu = FALSE; PCRE2_SPTR ptr = *ptrptr; PCRE2_SPTR tempptr; PCRE2_SPTR nestptr = NULL; PCRE2_UCHAR *previous = NULL; PCRE2_UCHAR *previous_callout = NULL; PCRE2_UCHAR *save_hwm = NULL; uint8_t classbits[32]; /* We can fish out the UTF setting once and for all into a BOOL, but we must not do this for other options (e.g. PCRE2_EXTENDED) because they may change dynamically as we process the pattern. */ #ifdef SUPPORT_UTF BOOL utf = (options & PCRE2_UTF) != 0; #if PCRE2_CODE_UNIT_WIDTH != 32 PCRE2_UCHAR utf_units[6]; /* For setting up multi-cu chars */ #endif #else /* No UTF support */ BOOL utf = FALSE; #endif /* Helper variables for OP_XCLASS opcode (for characters > 255). We define class_uchardata always so that it can be passed to add_to_class() always, though it will not be used in non-UTF 8-bit cases. This avoids having to supply alternative calls for the different cases. */ PCRE2_UCHAR *class_uchardata; #ifdef SUPPORT_WIDE_CHARS BOOL xclass; PCRE2_UCHAR *class_uchardata_base; #endif /* Set up the default and non-default settings for greediness */ greedy_default = ((options & PCRE2_UNGREEDY) != 0); greedy_non_default = greedy_default ^ 1; /* Initialize no first unit, no required unit. REQ_UNSET means "no char matching encountered yet". It gets changed to REQ_NONE if we hit something that matches a non-fixed first unit; reqcu just remains unset if we never find one. When we hit a repeat whose minimum is zero, we may have to adjust these values to take the zero repeat into account. This is implemented by setting them to zerofirstcu and zeroreqcu when such a repeat is encountered. The individual item types that can be repeated set these backoff variables appropriately. */ firstcu = reqcu = zerofirstcu = zeroreqcu = 0; firstcuflags = reqcuflags = zerofirstcuflags = zeroreqcuflags = REQ_UNSET; /* The variable req_caseopt contains either the REQ_CASELESS value or zero, according to the current setting of the caseless flag. The REQ_CASELESS value leaves the lower 28 bit empty. It is added into the firstcu or reqcu variables to record the case status of the value. This is used only for ASCII characters. */ req_caseopt = ((options & PCRE2_CASELESS) != 0)? REQ_CASELESS:0; /* Switch on next character until the end of the branch */ for (;; ptr++) { BOOL negate_class; BOOL should_flip_negation; BOOL possessive_quantifier; BOOL is_quantifier; BOOL is_recurse; BOOL reset_bracount; int class_has_8bitchar; int class_one_char; #ifdef SUPPORT_WIDE_CHARS BOOL xclass_has_prop; #endif int newoptions; uint32_t recno; int refsign; int skipbytes; uint32_t subreqcu, subfirstcu; int32_t subreqcuflags, subfirstcuflags; int terminator; unsigned int mclength; unsigned int tempbracount; uint32_t ec; PCRE2_UCHAR mcbuffer[8]; /* Get next character in the pattern */ c = *ptr; /* If we are at the end of a nested substitution, revert to the outer level string. Nesting only happens one level deep. */ if (c == CHAR_NULL && nestptr != NULL) { ptr = nestptr; nestptr = NULL; c = *ptr; } /* If we are in the pre-compile phase, accumulate the length used for the previous cycle of this loop. */ if (lengthptr != NULL) { if (code > cb->start_workspace + cb->workspace_size - WORK_SIZE_SAFETY_MARGIN) /* Check for overrun */ { *errorcodeptr = ERR52; goto FAILED; } /* There is at least one situation where code goes backwards: this is the case of a zero quantifier after a class (e.g. [ab]{0}). At compile time, the class is simply eliminated. However, it is created first, so we have to allow memory for it. Therefore, don't ever reduce the length at this point. */ if (code < last_code) code = last_code; /* Paranoid check for integer overflow */ if (OFLOW_MAX - *lengthptr < (size_t)(code - last_code)) { *errorcodeptr = ERR20; goto FAILED; } *lengthptr += code - last_code; /* If "previous" is set and it is not at the start of the work space, move it back to there, in order to avoid filling up the work space. Otherwise, if "previous" is NULL, reset the current code pointer to the start. */ if (previous != NULL) { if (previous > orig_code) { memmove(orig_code, previous, CU2BYTES(code - previous)); code -= previous - orig_code; previous = orig_code; } } else code = orig_code; /* Remember where this code item starts so we can pick up the length next time round. */ last_code = code; } /* In the real compile phase, just check the workspace used by the forward reference list. */ else if (cb->hwm > cb->start_workspace + cb->workspace_size - WORK_SIZE_SAFETY_MARGIN) { *errorcodeptr = ERR52; goto FAILED; } /* If in \Q...\E, check for the end; if not, we have a literal */ if (inescq && (c != CHAR_NULL || ptr < cb->end_pattern)) { if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E) { inescq = FALSE; ptr++; continue; } else { if (previous_callout != NULL) { if (lengthptr == NULL) /* Don't attempt in pre-compile phase */ complete_callout(previous_callout, ptr, cb); previous_callout = NULL; } if ((options & PCRE2_AUTO_CALLOUT) != 0) { previous_callout = code; code = auto_callout(code, ptr, cb); } goto NORMAL_CHAR; } /* Control does not reach here. */ } /* In extended mode, skip white space and comments. We need a loop in order to check for more white space and more comments after a comment. */ if ((options & PCRE2_EXTENDED) != 0) { for (;;) { while (MAX_255(c) && (cb->ctypes[c] & ctype_space) != 0) c = *(++ptr); if (c != CHAR_NUMBER_SIGN) break; ptr++; while (*ptr != CHAR_NULL) { if (IS_NEWLINE(ptr)) /* For non-fixed-length newline cases, */ { /* IS_NEWLINE sets cb->nllen. */ ptr += cb->nllen; break; } ptr++; #ifdef SUPPORT_UTF if (utf) FORWARDCHAR(ptr); #endif } c = *ptr; /* Either NULL or the char after a newline */ } } /* See if the next thing is a quantifier. */ is_quantifier = c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK || (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1)); /* Fill in length of a previous callout, except when the next thing is a quantifier or when processing a property substitution string in UCP mode. */ if (!is_quantifier && previous_callout != NULL && nestptr == NULL && after_manual_callout-- <= 0) { if (lengthptr == NULL) /* Don't attempt in pre-compile phase */ complete_callout(previous_callout, ptr, cb); previous_callout = NULL; } /* Create auto callout, except for quantifiers, or while processing property strings that are substituted for \w etc in UCP mode. */ if ((options & PCRE2_AUTO_CALLOUT) != 0 && !is_quantifier && nestptr == NULL) { previous_callout = code; code = auto_callout(code, ptr, cb); } /* Process the next pattern item. */ switch(c) { /* ===================================================================*/ /* The branch terminates at string end or | or ) */ case CHAR_NULL: if (ptr < cb->end_pattern) goto NORMAL_CHAR; /* Zero data character */ /* Fall through */ case CHAR_VERTICAL_LINE: case CHAR_RIGHT_PARENTHESIS: *firstcuptr = firstcu; *firstcuflagsptr = firstcuflags; *reqcuptr = reqcu; *reqcuflagsptr = reqcuflags; *codeptr = code; *ptrptr = ptr; if (lengthptr != NULL) { if (OFLOW_MAX - *lengthptr < (size_t)(code - last_code)) { *errorcodeptr = ERR20; goto FAILED; } *lengthptr += code - last_code; /* To include callout length */ } return TRUE; /* ===================================================================*/ /* Handle single-character metacharacters. In multiline mode, ^ disables the setting of any following char as a first character. */ case CHAR_CIRCUMFLEX_ACCENT: previous = NULL; if ((options & PCRE2_MULTILINE) != 0) { if (firstcuflags == REQ_UNSET) zerofirstcuflags = firstcuflags = REQ_NONE; *code++ = OP_CIRCM; } else *code++ = OP_CIRC; break; case CHAR_DOLLAR_SIGN: previous = NULL; *code++ = ((options & PCRE2_MULTILINE) != 0)? OP_DOLLM : OP_DOLL; break; /* There can never be a first char if '.' is first, whatever happens about repeats. The value of reqcu doesn't change either. */ case CHAR_DOT: if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; previous = code; *code++ = ((options & PCRE2_DOTALL) != 0)? OP_ALLANY: OP_ANY; break; /* ===================================================================*/ /* Character classes. If the included characters are all < 256, we build a 32-byte bitmap of the permitted characters, except in the special case where there is only one such character. For negated classes, we build the map as usual, then invert it at the end. However, we use a different opcode so that data characters > 255 can be handled correctly. If the class contains characters outside the 0-255 range, a different opcode is compiled. It may optionally have a bit map for characters < 256, but those above are are explicitly listed afterwards. A flag byte tells whether the bitmap is present, and whether this is a negated class or not. An isolated ']' character is not treated specially, so is just another data character. In earlier versions of PCRE that used the original API there was a "JavaScript compatibility mode" in which it gave an error. However, JavaScript itself has changed in this respect so there is no longer any need for this special handling. In another (POSIX) regex library, the ugly syntax [[:<:]] and [[:>:]] is used for "start of word" and "end of word". As these are otherwise illegal sequences, we don't break anything by recognizing them. They are replaced by \b(?=\w) and \b(?<=\w) respectively. Sequences like [a[:<:]] are erroneous and are handled by the normal code below. */ case CHAR_LEFT_SQUARE_BRACKET: if (PRIV(strncmp_c8)(ptr+1, STRING_WEIRD_STARTWORD, 6) == 0) { nestptr = ptr + 7; ptr = sub_start_of_word - 1; continue; } if (PRIV(strncmp_c8)(ptr+1, STRING_WEIRD_ENDWORD, 6) == 0) { nestptr = ptr + 7; ptr = sub_end_of_word - 1; continue; } /* Handle a real character class. */ previous = code; /* PCRE supports POSIX class stuff inside a class. Perl gives an error if they are encountered at the top level, so we'll do that too. */ if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr)) { *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR12 : ERR13; goto FAILED; } /* If the first character is '^', set the negation flag and skip it. Also, if the first few characters (either before or after ^) are \Q\E or \E we skip them too. This makes for compatibility with Perl. */ negate_class = FALSE; for (;;) { c = *(++ptr); if (c == CHAR_BACKSLASH) { if (ptr[1] == CHAR_E) ptr++; else if (PRIV(strncmp_c8)(ptr + 1, STR_Q STR_BACKSLASH STR_E, 3) == 0) ptr += 3; else break; } else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT) negate_class = TRUE; else break; } /* Empty classes are allowed if PCRE2_ALLOW_EMPTY_CLASS is set. Otherwise, an initial ']' is taken as a data character -- the code below handles that. When empty classes are allowed, [] must always fail, so generate OP_FAIL, whereas [^] must match any character, so generate OP_ALLANY. */ if (c == CHAR_RIGHT_SQUARE_BRACKET && (cb->external_options & PCRE2_ALLOW_EMPTY_CLASS) != 0) { *code++ = negate_class? OP_ALLANY : OP_FAIL; if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; break; } /* If a class contains a negative special such as \S, we need to flip the negation flag at the end, so that support for characters > 255 works correctly (they are all included in the class). */ should_flip_negation = FALSE; /* Extended class (xclass) will be used when characters > 255 might match. */ #ifdef SUPPORT_WIDE_CHARS xclass = FALSE; class_uchardata = code + LINK_SIZE + 2; /* For XCLASS items */ class_uchardata_base = class_uchardata; /* Save the start */ #endif /* For optimization purposes, we track some properties of the class: class_has_8bitchar will be non-zero if the class contains at least one 256 character with a code point less than 256; class_one_char will be 1 if the class contains just one character; xclass_has_prop will be TRUE if Unicode property checks are present in the class. */ class_has_8bitchar = 0; class_one_char = 0; #ifdef SUPPORT_WIDE_CHARS xclass_has_prop = FALSE; #endif /* Initialize the 256-bit (32-byte) bit map to all zeros. We build the map in a temporary bit of memory, in case the class contains fewer than two 8-bit characters because in that case the compiled code doesn't use the bit map. */ memset(classbits, 0, 32 * sizeof(uint8_t)); /* Process characters until ] is reached. As the test is at the end of the loop, an initial ] is taken as a data character. At the start of the loop, c contains the first code unit of the character. If it is zero, check for the end of the pattern, to allow binary zero as data. */ for(;;) { PCRE2_SPTR oldptr; if (c == CHAR_NULL && ptr >= cb->end_pattern) { *errorcodeptr = ERR6; /* Missing terminating ']' */ goto FAILED; } #ifdef SUPPORT_UTF if (utf && HAS_EXTRALEN(c)) { /* Braces are required because the */ GETCHARLEN(c, ptr, ptr); /* macro generates multiple statements */ } #endif #ifdef SUPPORT_WIDE_CHARS /* In the pre-compile phase, accumulate the length of any wide characters and reset the pointer. This is so that very large classes that contain a zillion wide characters no longer overwrite the work space (which is on the stack). We have to remember that there was XCLASS data, however. */ if (lengthptr != NULL && class_uchardata > class_uchardata_base) { xclass = TRUE; *lengthptr += class_uchardata - class_uchardata_base; class_uchardata = class_uchardata_base; } #endif /* Inside \Q...\E everything is literal except \E */ if (inescq) { if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E) /* If we are at \E */ { inescq = FALSE; /* Reset literal state */ ptr++; /* Skip the 'E' */ goto CONTINUE_CLASS; /* Carry on with next char */ } goto CHECK_RANGE; /* Could be range if \E follows */ } /* Handle POSIX class names. Perl allows a negation extension of the form [:^name:]. A square bracket that doesn't match the syntax is treated as a literal. We also recognize the POSIX constructions [.ch.] and [=ch=] ("collating elements") and fault them, as Perl 5.6 and 5.8 do. */ if (c == CHAR_LEFT_SQUARE_BRACKET && (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr)) { BOOL local_negate = FALSE; int posix_class, taboffset, tabopt; register const uint8_t *cbits = cb->cbits; uint8_t pbits[32]; if (ptr[1] != CHAR_COLON) { *errorcodeptr = ERR13; goto FAILED; } ptr += 2; if (*ptr == CHAR_CIRCUMFLEX_ACCENT) { local_negate = TRUE; should_flip_negation = TRUE; /* Note negative special */ ptr++; } posix_class = check_posix_name(ptr, (int)(tempptr - ptr)); if (posix_class < 0) { *errorcodeptr = ERR30; goto FAILED; } /* If matching is caseless, upper and lower are converted to alpha. This relies on the fact that the class table starts with alpha, lower, upper as the first 3 entries. */ if ((options & PCRE2_CASELESS) != 0 && posix_class <= 2) posix_class = 0; /* When PCRE2_UCP is set, some of the POSIX classes are converted to different escape sequences that use Unicode properties \p or \P. Others that are not available via \p or \P generate XCL_PROP/XCL_NOTPROP directly. UCP support is not available unless UTF support is.*/ #ifdef SUPPORT_UTF if ((options & PCRE2_UCP) != 0) { unsigned int ptype = 0; int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0); /* The posix_substitutes table specifies which POSIX classes can be converted to \p or \P items. */ if (posix_substitutes[pc] != NULL) { nestptr = tempptr + 1; ptr = posix_substitutes[pc] - 1; goto CONTINUE_CLASS; } /* There are three other classes that generate special property calls that are recognized only in an XCLASS. */ else switch(posix_class) { case PC_GRAPH: ptype = PT_PXGRAPH; /* Fall through */ case PC_PRINT: if (ptype == 0) ptype = PT_PXPRINT; /* Fall through */ case PC_PUNCT: if (ptype == 0) ptype = PT_PXPUNCT; *class_uchardata++ = local_negate? XCL_NOTPROP : XCL_PROP; *class_uchardata++ = ptype; *class_uchardata++ = 0; xclass_has_prop = TRUE; ptr = tempptr + 1; goto CONTINUE_CLASS; /* For all other POSIX classes, no special action is taken in UCP mode. Fall through to the non_UCP case. */ default: break; } } #endif /* SUPPORT_UTF */ /* In the non-UCP case, or when UCP makes no difference, we build the bit map for the POSIX class in a chunk of local store because we may be adding and subtracting from it, and we don't want to subtract bits that may be in the main map already. At the end we or the result into the bit map that is being built. */ posix_class *= 3; /* Copy in the first table (always present) */ memcpy(pbits, cbits + posix_class_maps[posix_class], 32 * sizeof(uint8_t)); /* If there is a second table, add or remove it as required. */ taboffset = posix_class_maps[posix_class + 1]; tabopt = posix_class_maps[posix_class + 2]; if (taboffset >= 0) { if (tabopt >= 0) for (c = 0; c < 32; c++) pbits[c] |= cbits[c + taboffset]; else for (c = 0; c < 32; c++) pbits[c] &= ~cbits[c + taboffset]; } /* Now see if we need to remove any special characters. An option value of 1 removes vertical space and 2 removes underscore. */ if (tabopt < 0) tabopt = -tabopt; if (tabopt == 1) pbits[1] &= ~0x3c; else if (tabopt == 2) pbits[11] &= 0x7f; /* Add the POSIX table or its complement into the main table that is being built and we are done. */ if (local_negate) for (c = 0; c < 32; c++) classbits[c] |= ~pbits[c]; else for (c = 0; c < 32; c++) classbits[c] |= pbits[c]; ptr = tempptr + 1; /* Every class contains at least one < 256 character. */ class_has_8bitchar = 1; /* Every class contains at least two characters. */ class_one_char = 2; goto CONTINUE_CLASS; /* End of POSIX syntax handling */ } /* Backslash may introduce a single character, or it may introduce one of the specials, which just set a flag. The sequence \b is a special case. Inside a class (and only there) it is treated as backspace. We assume that other escapes have more than one character in them, so speculatively set both class_has_8bitchar and class_one_char bigger than one. Unrecognized escapes fall through and are faulted. */ if (c == CHAR_BACKSLASH) { escape = check_escape(&ptr, &ec, errorcodeptr, options, TRUE, cb); if (*errorcodeptr != 0) goto FAILED; if (escape == 0) c = ec; /* Escaped single char */ else if (escape == ESC_b) c = CHAR_BS; /* \b is backspace in a class */ else if (escape == ESC_N) /* \N is not supported in a class */ { *errorcodeptr = ERR71; goto FAILED; } else if (escape == ESC_Q) /* Handle start of quoted string */ { if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) { ptr += 2; /* avoid empty string */ } else inescq = TRUE; goto CONTINUE_CLASS; } else if (escape == ESC_E) goto CONTINUE_CLASS; /* Ignore orphan \E */ else /* Handle \d-type escapes */ { register const uint8_t *cbits = cb->cbits; /* Every class contains at least two < 256 characters. */ class_has_8bitchar++; /* Every class contains at least two characters. */ class_one_char += 2; switch (escape) { #ifdef SUPPORT_UTF case ESC_du: /* These are the values given for \d etc */ case ESC_DU: /* when PCRE2_UCP is set. We replace the */ case ESC_wu: /* escape sequence with an appropriate \p */ case ESC_WU: /* or \P to test Unicode properties instead */ case ESC_su: /* of the default ASCII testing. */ case ESC_SU: nestptr = ptr; ptr = substitutes[escape - ESC_DU] - 1; /* Just before substitute */ class_has_8bitchar--; /* Undo! */ break; #endif case ESC_d: for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit]; break; case ESC_D: should_flip_negation = TRUE; for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit]; break; case ESC_w: for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_word]; break; case ESC_W: should_flip_negation = TRUE; for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word]; break; /* Perl 5.004 onwards omitted VT from \s, but restored it at Perl 5.18. Before PCRE 8.34, we had to preserve the VT bit if it was previously set by something earlier in the character class. Luckily, the value of CHAR_VT is 0x0b in both ASCII and EBCDIC, so we could just adjust the appropriate bit. From PCRE 8.34 we no longer treat \s and \S specially. */ case ESC_s: for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space]; break; case ESC_S: should_flip_negation = TRUE; for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space]; break; /* The rest apply in both UCP and non-UCP cases. */ case ESC_h: (void)add_list_to_class(classbits, &class_uchardata, options, cb, PRIV(hspace_list), NOTACHAR); break; case ESC_H: (void)add_not_list_to_class(classbits, &class_uchardata, options, cb, PRIV(hspace_list)); break; case ESC_v: (void)add_list_to_class(classbits, &class_uchardata, options, cb, PRIV(vspace_list), NOTACHAR); break; case ESC_V: (void)add_not_list_to_class(classbits, &class_uchardata, options, cb, PRIV(vspace_list)); break; #ifdef SUPPORT_UTF case ESC_p: case ESC_P: { BOOL negated; unsigned int ptype = 0, pdata = 0; if (!get_ucp(&ptr, &negated, &ptype, &pdata, errorcodeptr, cb)) goto FAILED; *class_uchardata++ = ((escape == ESC_p) != negated)? XCL_PROP : XCL_NOTPROP; *class_uchardata++ = ptype; *class_uchardata++ = pdata; xclass_has_prop = TRUE; class_has_8bitchar--; /* Undo! */ } break; #endif /* Unrecognized escapes are faulted. */ default: *errorcodeptr = ERR7; goto FAILED; } /* Handled \d-type escape */ goto CONTINUE_CLASS; } /* Control gets here if the escape just defined a single character. This is in c and may be greater than 256. */ escape = 0; } /* End of backslash handling */ /* A character may be followed by '-' to form a range. However, Perl does not permit ']' to be the end of the range. A '-' character at the end is treated as a literal. Perl ignores orphaned \E sequences entirely. The code for handling \Q and \E is messy. */ CHECK_RANGE: while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) { inescq = FALSE; ptr += 2; } oldptr = ptr; /* Remember if \r or \n were explicitly used */ if (c == CHAR_CR || c == CHAR_NL) cb->external_flags |= PCRE2_HASCRORLF; /* Check for range */ if (!inescq && ptr[1] == CHAR_MINUS) { uint32_t d; ptr += 2; while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2; /* If we hit \Q (not followed by \E) at this point, go into escaped mode. */ while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q) { ptr += 2; if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) { ptr += 2; continue; } inescq = TRUE; break; } /* Minus (hyphen) at the end of a class is treated as a literal, so put back the pointer and jump to handle the character that preceded it. */ if (*ptr == CHAR_NULL || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET)) { ptr = oldptr; goto CLASS_SINGLE_CHARACTER; } /* Otherwise, we have a potential range; pick up the next character */ #ifdef SUPPORT_UTF if (utf) { /* Braces are required because the */ GETCHARLEN(d, ptr, ptr); /* macro generates multiple statements */ } else #endif d = *ptr; /* Not UTF mode */ /* The second part of a range can be a single-character escape sequence, but not any of the other escapes. Perl treats a hyphen as a literal in such circumstances. However, in Perl's warning mode, a warning is given, so PCRE now faults it as it is almost certainly a mistake on the user's part. */ if (!inescq) { if (d == CHAR_BACKSLASH) { int descape; descape = check_escape(&ptr, &d, errorcodeptr, options, TRUE, cb); if (*errorcodeptr != 0) goto FAILED; /* 0 means a character was put into d; \b is backspace; any other special causes an error. */ if (descape != 0) { if (descape == ESC_b) d = CHAR_BS; else { *errorcodeptr = ERR50; goto FAILED; } } } /* A hyphen followed by a POSIX class is treated in the same way. */ else if (d == CHAR_LEFT_SQUARE_BRACKET && (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT || ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr)) { *errorcodeptr = ERR50; goto FAILED; } } /* Check that the two values are in the correct order. Optimize one-character ranges. */ if (d < c) { *errorcodeptr = ERR8; goto FAILED; } if (d == c) goto CLASS_SINGLE_CHARACTER; /* A few lines below */ /* We have found a character range, so single character optimizations cannot be done anymore. Any value greater than 1 indicates that there is more than one character. */ class_one_char = 2; /* Remember an explicit \r or \n, and add the range to the class. */ if (d == CHAR_CR || d == CHAR_NL) cb->external_flags |= PCRE2_HASCRORLF; class_has_8bitchar += add_to_class(classbits, &class_uchardata, options, cb, c, d); goto CONTINUE_CLASS; /* Go get the next char in the class */ } /* Handle a single character - we can get here for a normal non-escape char, or after \ that introduces a single character or for an apparent range that isn't. Only the value 1 matters for class_one_char, so don't increase it if it is already 2 or more ... just in case there's a class with a zillion characters in it. */ CLASS_SINGLE_CHARACTER: if (class_one_char < 2) class_one_char++; /* If class_one_char is 1, we have the first single character in the class, and there have been no prior ranges, or XCLASS items generated by escapes. If this is the final character in the class, we can optimize by turning the item into a 1-character OP_CHAR[I] if it's positive, or OP_NOT[I] if it's negative. In the positive case, it can cause firstcu to be set. Otherwise, there can be no first char if this item is first, whatever repeat count may follow. In the case of reqcu, save the previous value for reinstating. */ if (!inescq && class_one_char == 1 && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) { ptr++; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; if (negate_class) { #ifdef SUPPORT_UTF int d; #endif if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; /* For caseless UTF mode, check whether this character has more than one other case. If so, generate a special OP_NOTPROP item instead of OP_NOTI. */ #ifdef SUPPORT_UTF if (utf && (options & PCRE2_CASELESS) != 0 && (d = UCD_CASESET(c)) != 0) { *code++ = OP_NOTPROP; *code++ = PT_CLIST; *code++ = d; } else #endif /* Char has only one other case, or UCP not available */ { *code++ = ((options & PCRE2_CASELESS) != 0)? OP_NOTI: OP_NOT; code += PUTCHAR(c, code); } /* We are finished with this character class */ goto END_CLASS; } /* For a single, positive character, get the value into mcbuffer, and then we can handle this with the normal one-character code. */ mclength = PUTCHAR(c, mcbuffer); goto ONE_CHAR; } /* End of 1-char optimization */ /* There is more than one character in the class, or an XCLASS item has been generated. Add this character to the class. */ class_has_8bitchar += add_to_class(classbits, &class_uchardata, options, cb, c, c); /* Continue to the next character in the class. Closing square bracket not within \Q..\E ends the class. A NULL character terminates a nested substitution string, but may be a data character in the main pattern (tested at the start of this loop). */ CONTINUE_CLASS: c = *(++ptr); if (c == 0 && nestptr != NULL) { ptr = nestptr; nestptr = NULL; c = *(++ptr); } if (c == CHAR_RIGHT_SQUARE_BRACKET && !inescq) break; } /* End of main class-processing loop */ /* We will need an XCLASS if data has been placed in class_uchardata. In the second phase this is a sufficient test. However, in the pre-compile phase, class_uchardata gets emptied to prevent workspace overflow, so it only if the very last character in the class needs XCLASS will it contain anything at this point. For this reason, xclass gets set TRUE above when class_uchardata is emptied, and that's why this code is the way it is here instead of just doing a test on class_uchardata below. */ #ifdef SUPPORT_WIDE_CHARS if (class_uchardata > class_uchardata_base) xclass = TRUE; #endif /* If this is the first thing in the branch, there can be no first char setting, whatever the repeat count. Any reqcu setting must remain unchanged after any kind of repeat. */ if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; /* If there are characters with values > 255, we have to compile an extended class, with its own opcode, unless there was a negated special such as \S in the class, and PCRE2_UCP is not set, because in that case all characters > 255 are in the class, so any that were explicitly given as well can be ignored. If (when there are explicit characters > 255 that must be listed) there are no characters < 256, we can omit the bitmap in the actual compiled code. */ #ifdef SUPPORT_UTF if (xclass && (!should_flip_negation || (options & PCRE2_UCP) != 0)) #elif PCRE2_CODE_UNIT_WIDTH != 8 if (xclass && !should_flip_negation) #endif #ifdef SUPPORT_WIDE_CHARS { *class_uchardata++ = XCL_END; /* Marks the end of extra data */ *code++ = OP_XCLASS; code += LINK_SIZE; *code = negate_class? XCL_NOT:0; if (xclass_has_prop) *code |= XCL_HASPROP; /* If the map is required, move up the extra data to make room for it; otherwise just move the code pointer to the end of the extra data. */ if (class_has_8bitchar > 0) { *code++ |= XCL_MAP; memmove(code + (32 / sizeof(PCRE2_UCHAR)), code, CU2BYTES(class_uchardata - code)); if (negate_class && !xclass_has_prop) for (c = 0; c < 32; c++) classbits[c] = ~classbits[c]; memcpy(code, classbits, 32); code = class_uchardata + (32 / sizeof(PCRE2_UCHAR)); } else code = class_uchardata; /* Now fill in the complete length of the item */ PUT(previous, 1, (int)(code - previous)); break; /* End of class handling */ } #endif /* If there are no characters > 255, or they are all to be included or excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the whole class was negated and whether there were negative specials such as \S (non-UCP) in the class. Then copy the 32-byte map into the code vector, negating it if necessary. */ *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS; if (lengthptr == NULL) /* Save time in the pre-compile phase */ { if (negate_class) for (c = 0; c < 32; c++) classbits[c] = ~classbits[c]; memcpy(code, classbits, 32); } code += 32 / sizeof(PCRE2_UCHAR); END_CLASS: break; /* ===================================================================*/ /* Various kinds of repeat; '{' is not necessarily a quantifier, but this has been tested above. */ case CHAR_LEFT_CURLY_BRACKET: if (!is_quantifier) goto NORMAL_CHAR; ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr); if (*errorcodeptr != 0) goto FAILED; goto REPEAT; case CHAR_ASTERISK: repeat_min = 0; repeat_max = -1; goto REPEAT; case CHAR_PLUS: repeat_min = 1; repeat_max = -1; goto REPEAT; case CHAR_QUESTION_MARK: repeat_min = 0; repeat_max = 1; REPEAT: if (previous == NULL) { *errorcodeptr = ERR9; goto FAILED; } if (repeat_min == 0) { firstcu = zerofirstcu; /* Adjust for zero repeat */ firstcuflags = zerofirstcuflags; reqcu = zeroreqcu; /* Ditto */ reqcuflags = zeroreqcuflags; } /* Remember whether this is a variable length repeat */ reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY; op_type = 0; /* Default single-char op codes */ possessive_quantifier = FALSE; /* Default not possessive quantifier */ /* Save start of previous item, in case we have to move it up in order to insert something before it. */ tempcode = previous; /* Before checking for a possessive quantifier, we must skip over whitespace and comments in extended mode because Perl allows white space at this point. */ if ((options & PCRE2_EXTENDED) != 0) { PCRE2_SPTR p = ptr + 1; for (;;) { while (MAX_255(*p) && (cb->ctypes[*p] & ctype_space) != 0) p++; if (*p != CHAR_NUMBER_SIGN) break; p++; while (*p != CHAR_NULL) { if (IS_NEWLINE(p)) /* For non-fixed-length newline cases, */ { /* IS_NEWLINE sets cb->nllen. */ p += cb->nllen; break; } p++; #ifdef SUPPORT_UTF if (utf) FORWARDCHAR(p); #endif } /* Loop for comment characters */ } /* Loop for multiple comments */ ptr = p - 1; /* Character before the next significant one. */ } /* If the next character is '+', we have a possessive quantifier. This implies greediness, whatever the setting of the PCRE2_UNGREEDY option. If the next character is '?' this is a minimizing repeat, by default, but if PCRE2_UNGREEDY is set, it works the other way round. We change the repeat type to the non-default. */ if (ptr[1] == CHAR_PLUS) { repeat_type = 0; /* Force greedy */ possessive_quantifier = TRUE; ptr++; } else if (ptr[1] == CHAR_QUESTION_MARK) { repeat_type = greedy_non_default; ptr++; } else repeat_type = greedy_default; /* If previous was a recursion call, wrap it in atomic brackets so that previous becomes the atomic group. All recursions were so wrapped in the past, but it no longer happens for non-repeated recursions. In fact, the repeated ones could be re-implemented independently so as not to need this, but for the moment we rely on the code for repeating groups. */ if (*previous == OP_RECURSE) { memmove(previous + 1 + LINK_SIZE, previous, CU2BYTES(1 + LINK_SIZE)); *previous = OP_ONCE; PUT(previous, 1, 2 + 2*LINK_SIZE); previous[2 + 2*LINK_SIZE] = OP_KET; PUT(previous, 3 + 2*LINK_SIZE, 2 + 2*LINK_SIZE); code += 2 + 2 * LINK_SIZE; length_prevgroup = 3 + 3*LINK_SIZE; /* When actually compiling, we need to check whether this was a forward reference, and if so, adjust the offset. */ if (lengthptr == NULL && cb->hwm >= cb->start_workspace + LINK_SIZE) { int offset = GET(cb->hwm, -LINK_SIZE); if (offset == previous + 1 - cb->start_code) PUT(cb->hwm, -LINK_SIZE, offset + 1 + LINK_SIZE); } } /* Now handle repetition for the different types of item. */ /* If previous was a character or negated character match, abolish the item and generate a repeat item instead. If a char item has a minimum of more than one, ensure that it is set in reqcu - it might not be if a sequence such as x{3} is the first thing in a branch because the x will have gone into firstcu instead. */ if (*previous == OP_CHAR || *previous == OP_CHARI || *previous == OP_NOT || *previous == OP_NOTI) { switch (*previous) { default: /* Make compiler happy. */ case OP_CHAR: op_type = OP_STAR - OP_STAR; break; case OP_CHARI: op_type = OP_STARI - OP_STAR; break; case OP_NOT: op_type = OP_NOTSTAR - OP_STAR; break; case OP_NOTI: op_type = OP_NOTSTARI - OP_STAR; break; } /* Deal with UTF characters that take up more than one code unit. It's easier to write this out separately than try to macrify it. Use c to hold the length of the character in code units, plus UTF_LENGTH to flag that it's a length rather than a small character. */ #ifdef MAYBE_UTF_MULTI if (utf && NOT_FIRSTCHAR(code[-1])) { PCRE2_UCHAR *lastchar = code - 1; BACKCHAR(lastchar); c = (int)(code - lastchar); /* Length of UTF character */ memcpy(utf_units, lastchar, CU2BYTES(c)); /* Save the char */ c |= UTF_LENGTH; /* Flag c as a length */ } else #endif /* MAYBE_UTF_MULTI */ /* Handle the case of a single charater - either with no UTF support, or with UTF disabled, or for a single-code-unit UTF character. */ { c = code[-1]; if (*previous <= OP_CHARI && repeat_min > 1) { reqcu = c; reqcuflags = req_caseopt | cb->req_varyopt; } } goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */ } /* If previous was a character type match (\d or similar), abolish it and create a suitable repeat item. The code is shared with single-character repeats by setting op_type to add a suitable offset into repeat_type. Note the the Unicode property types will be present only when SUPPORT_UTF is defined, but we don't wrap the little bits of code here because it just makes it horribly messy. */ else if (*previous < OP_EODN) { PCRE2_UCHAR *oldcode; int prop_type, prop_value; op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */ c = *previous; /* Save previous opcode */ if (c == OP_PROP || c == OP_NOTPROP) { prop_type = previous[1]; prop_value = previous[2]; } else { /* Come here from just above with a character in c */ OUTPUT_SINGLE_REPEAT: prop_type = prop_value = -1; } /* At this point we either have prop_type == prop_value == -1 and either a code point or a character type that is not OP_[NOT]PROP in c, or we have OP_[NOT]PROP in c and prop_type/prop_value not negative. */ oldcode = code; /* Save where we were */ code = previous; /* Usually overwrite previous item */ /* If the maximum is zero then the minimum must also be zero; Perl allows this case, so we do too - by simply omitting the item altogether. */ if (repeat_max == 0) goto END_REPEAT; /* Combine the op_type with the repeat_type */ repeat_type += op_type; /* A minimum of zero is handled either as the special case * or ?, or as an UPTO, with the maximum given. */ if (repeat_min == 0) { if (repeat_max == -1) *code++ = OP_STAR + repeat_type; else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type; else { *code++ = OP_UPTO + repeat_type; PUT2INC(code, 0, repeat_max); } } /* A repeat minimum of 1 is optimized into some special cases. If the maximum is unlimited, we use OP_PLUS. Otherwise, the original item is left in place and, if the maximum is greater than 1, we use OP_UPTO with one less than the maximum. */ else if (repeat_min == 1) { if (repeat_max == -1) *code++ = OP_PLUS + repeat_type; else { code = oldcode; /* Leave previous item in place */ if (repeat_max == 1) goto END_REPEAT; *code++ = OP_UPTO + repeat_type; PUT2INC(code, 0, repeat_max - 1); } } /* The case {n,n} is just an EXACT, while the general case {n,m} is handled as an EXACT followed by an UPTO or STAR or QUERY. */ else { *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */ PUT2INC(code, 0, repeat_min); /* Unless repeat_max equals repeat_min, fill in the data for EXACT, and then generate the second opcode. In UTF mode, multi-code-unit characters have their length in c, with the UTF_LENGTH bit as a flag, and the code units in utf_units. For a repeated Unicode property match, there are two extra values that define the required property, and c never has the UTF_LENGTH bit set. */ if (repeat_max != repeat_min) { #ifdef MAYBE_UTF_MULTI if (utf && (c & UTF_LENGTH) != 0) { memcpy(code, utf_units, CU2BYTES(c & 7)); code += c & 7; } else #endif /* MAYBE_UTF_MULTI */ { *code++ = c; if (prop_type >= 0) { *code++ = prop_type; *code++ = prop_value; } } /* Now set up the following opcode */ if (repeat_max < 0) *code++ = OP_STAR + repeat_type; else { repeat_max -= repeat_min; if (repeat_max == 1) { *code++ = OP_QUERY + repeat_type; } else { *code++ = OP_UPTO + repeat_type; PUT2INC(code, 0, repeat_max); } } } } /* Fill in the character or character type for the final opcode. */ #ifdef MAYBE_UTF_MULTI if (utf && (c & UTF_LENGTH) != 0) { memcpy(code, utf_units, CU2BYTES(c & 7)); code += c & 7; } else #endif /* MAYBEW_UTF_MULTI */ { *code++ = c; if (prop_type >= 0) { *code++ = prop_type; *code++ = prop_value; } } } /* If previous was a character class or a back reference, we put the repeat stuff after it, but just skip the item if the repeat was {0,0}. */ else if (*previous == OP_CLASS || *previous == OP_NCLASS || #ifdef SUPPORT_WIDE_CHARS *previous == OP_XCLASS || #endif *previous == OP_REF || *previous == OP_REFI || *previous == OP_DNREF || *previous == OP_DNREFI) { if (repeat_max == 0) { code = previous; goto END_REPEAT; } if (repeat_min == 0 && repeat_max == -1) *code++ = OP_CRSTAR + repeat_type; else if (repeat_min == 1 && repeat_max == -1) *code++ = OP_CRPLUS + repeat_type; else if (repeat_min == 0 && repeat_max == 1) *code++ = OP_CRQUERY + repeat_type; else { *code++ = OP_CRRANGE + repeat_type; PUT2INC(code, 0, repeat_min); if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */ PUT2INC(code, 0, repeat_max); } } /* If previous was a bracket group, we may have to replicate it in certain cases. Note that at this point we can encounter only the "basic" bracket opcodes such as BRA and CBRA, as this is the place where they get converted into the more special varieties such as BRAPOS and SBRA. A test for >= OP_ASSERT and <= OP_COND includes ASSERT, ASSERT_NOT, ASSERTBACK, ASSERTBACK_NOT, ONCE, ONCE_NC, BRA, BRAPOS, CBRA, CBRAPOS, and COND. Originally, PCRE did not allow repetition of assertions, but now it does, for Perl compatibility. */ else if (*previous >= OP_ASSERT && *previous <= OP_COND) { register int i; int len = (int)(code - previous); PCRE2_UCHAR *bralink = NULL; PCRE2_UCHAR *brazeroptr = NULL; /* Repeating a DEFINE group is pointless, but Perl allows the syntax, so we just ignore the repeat. */ if (*previous == OP_COND && previous[LINK_SIZE+1] == OP_DEF) goto END_REPEAT; /* There is no sense in actually repeating assertions. The only potential use of repetition is in cases when the assertion is optional. Therefore, if the minimum is greater than zero, just ignore the repeat. If the maximum is not zero or one, set it to 1. */ if (*previous < OP_ONCE) /* Assertion */ { if (repeat_min > 0) goto END_REPEAT; if (repeat_max < 0 || repeat_max > 1) repeat_max = 1; } /* The case of a zero minimum is special because of the need to stick OP_BRAZERO in front of it, and because the group appears once in the data, whereas in other cases it appears the minimum number of times. For this reason, it is simplest to treat this case separately, as otherwise the code gets far too messy. There are several special subcases when the minimum is zero. */ if (repeat_min == 0) { /* If the maximum is also zero, we used to just omit the group from the output altogether, like this: ** if (repeat_max == 0) ** { ** code = previous; ** goto END_REPEAT; ** } However, that fails when a group or a subgroup within it is referenced as a subroutine from elsewhere in the pattern, so now we stick in OP_SKIPZERO in front of it so that it is skipped on execution. As we don't have a list of which groups are referenced, we cannot do this selectively. If the maximum is 1 or unlimited, we just have to stick in the BRAZERO and do no more at this point. However, we do need to adjust any OP_RECURSE calls inside the group that refer to the group itself or any internal or forward referenced group, because the offset is from the start of the whole regex. Temporarily terminate the pattern while doing this. */ if (repeat_max <= 1) /* Covers 0, 1, and unlimited */ { *code = OP_END; adjust_recurse(previous, 1, utf, cb, save_hwm); memmove(previous + 1, previous, CU2BYTES(len)); code++; if (repeat_max == 0) { *previous++ = OP_SKIPZERO; goto END_REPEAT; } brazeroptr = previous; /* Save for possessive optimizing */ *previous++ = OP_BRAZERO + repeat_type; } /* If the maximum is greater than 1 and limited, we have to replicate in a nested fashion, sticking OP_BRAZERO before each set of brackets. The first one has to be handled carefully because it's the original copy, which has to be moved up. The remainder can be handled by code that is common with the non-zero minimum case below. We have to adjust the value or repeat_max, since one less copy is required. Once again, we may have to adjust any OP_RECURSE calls inside the group. */ else { int offset; *code = OP_END; adjust_recurse(previous, 2 + LINK_SIZE, utf, cb, save_hwm); memmove(previous + 2 + LINK_SIZE, previous, CU2BYTES(len)); code += 2 + LINK_SIZE; *previous++ = OP_BRAZERO + repeat_type; *previous++ = OP_BRA; /* We chain together the bracket offset fields that have to be filled in later when the ends of the brackets are reached. */ offset = (bralink == NULL)? 0 : (int)(previous - bralink); bralink = previous; PUTINC(previous, 0, offset); } repeat_max--; } /* If the minimum is greater than zero, replicate the group as many times as necessary, and adjust the maximum to the number of subsequent copies that we need. If we set a first char from the group, and didn't set a required char, copy the latter from the former. If there are any forward reference subroutine calls in the group, there will be entries on the workspace list; replicate these with an appropriate increment. */ else { if (repeat_min > 1) { /* In the pre-compile phase, we don't actually do the replication. We just adjust the length as if we had. Do some paranoid checks for potential integer overflow. The INT64_OR_DOUBLE type is a 64-bit integer type when available, otherwise double. */ if (lengthptr != NULL) { size_t delta = (repeat_min - 1)*length_prevgroup; if ((INT64_OR_DOUBLE)(repeat_min - 1)* (INT64_OR_DOUBLE)length_prevgroup > (INT64_OR_DOUBLE)INT_MAX || OFLOW_MAX - *lengthptr < delta) { *errorcodeptr = ERR20; goto FAILED; } *lengthptr += delta; } /* This is compiling for real. If there is a set first byte for the group, and we have not yet set a "required byte", set it. Make sure there is enough workspace for copying forward references before doing the copy. */ else { if (groupsetfirstcu && reqcuflags < 0) { reqcu = firstcu; reqcuflags = firstcuflags; } for (i = 1; i < repeat_min; i++) { PCRE2_UCHAR *hc; PCRE2_UCHAR *this_hwm = cb->hwm; memcpy(code, previous, CU2BYTES(len)); while (cb->hwm > cb->start_workspace + cb->workspace_size - WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm)) { size_t save_offset = save_hwm - cb->start_workspace; size_t this_offset = this_hwm - cb->start_workspace; *errorcodeptr = expand_workspace(cb); if (*errorcodeptr != 0) goto FAILED; save_hwm = (PCRE2_UCHAR *)cb->start_workspace + save_offset; this_hwm = (PCRE2_UCHAR *)cb->start_workspace + this_offset; } for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE) { PUT(cb->hwm, 0, GET(hc, 0) + len); cb->hwm += LINK_SIZE; } save_hwm = this_hwm; code += len; } } } if (repeat_max > 0) repeat_max -= repeat_min; } /* This code is common to both the zero and non-zero minimum cases. If the maximum is limited, it replicates the group in a nested fashion, remembering the bracket starts on a stack. In the case of a zero minimum, the first one was set up above. In all cases the repeat_max now specifies the number of additional copies needed. Again, we must remember to replicate entries on the forward reference list. */ if (repeat_max >= 0) { /* In the pre-compile phase, we don't actually do the replication. We just adjust the length as if we had. For each repetition we must add 1 to the length for BRAZERO and for all but the last repetition we must add 2 + 2*LINKSIZE to allow for the nesting that occurs. Do some paranoid checks to avoid integer overflow. The INT64_OR_DOUBLE type is a 64-bit integer type when available, otherwise double. */ if (lengthptr != NULL && repeat_max > 0) { size_t delta = repeat_max*(length_prevgroup + 1 + 2 + 2*LINK_SIZE) - 2 - 2*LINK_SIZE; /* Last one doesn't nest */ if ((INT64_OR_DOUBLE)repeat_max * (INT64_OR_DOUBLE)(length_prevgroup + 1 + 2 + 2*LINK_SIZE) > (INT64_OR_DOUBLE)INT_MAX || OFLOW_MAX - *lengthptr < delta) { *errorcodeptr = ERR20; goto FAILED; } *lengthptr += delta; } /* This is compiling for real */ else for (i = repeat_max - 1; i >= 0; i--) { PCRE2_UCHAR *hc; PCRE2_UCHAR *this_hwm = cb->hwm; *code++ = OP_BRAZERO + repeat_type; /* All but the final copy start a new nesting, maintaining the chain of brackets outstanding. */ if (i != 0) { int offset; *code++ = OP_BRA; offset = (bralink == NULL)? 0 : (int)(code - bralink); bralink = code; PUTINC(code, 0, offset); } memcpy(code, previous, CU2BYTES(len)); /* Ensure there is enough workspace for forward references before copying them. */ while (cb->hwm > cb->start_workspace + cb->workspace_size - WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm)) { size_t save_offset = save_hwm - cb->start_workspace; size_t this_offset = this_hwm - cb->start_workspace; *errorcodeptr = expand_workspace(cb); if (*errorcodeptr != 0) goto FAILED; save_hwm = (PCRE2_UCHAR *)cb->start_workspace + save_offset; this_hwm = (PCRE2_UCHAR *)cb->start_workspace + this_offset; } for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE) { PUT(cb->hwm, 0, GET(hc, 0) + len + ((i != 0)? 2+LINK_SIZE : 1)); cb->hwm += LINK_SIZE; } save_hwm = this_hwm; code += len; } /* Now chain through the pending brackets, and fill in their length fields (which are holding the chain links pro tem). */ while (bralink != NULL) { int oldlinkoffset; int offset = (int)(code - bralink + 1); PCRE2_UCHAR *bra = code - offset; oldlinkoffset = GET(bra, 1); bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset; *code++ = OP_KET; PUTINC(code, 0, offset); PUT(bra, 1, offset); } } /* If the maximum is unlimited, set a repeater in the final copy. For ONCE brackets, that's all we need to do. However, possessively repeated ONCE brackets can be converted into non-capturing brackets, as the behaviour of (?:xx)++ is the same as (?>xx)++ and this saves having to deal with possessive ONCEs specially. Otherwise, when we are doing the actual compile phase, check to see whether this group is one that could match an empty string. If so, convert the initial operator to the S form (e.g. OP_BRA -> OP_SBRA) so that runtime checking can be done. [This check is also applied to ONCE groups at runtime, but in a different way.] Then, if the quantifier was possessive and the bracket is not a conditional, we convert the BRA code to the POS form, and the KET code to KETRPOS. (It turns out to be convenient at runtime to detect this kind of subpattern at both the start and at the end.) The use of special opcodes makes it possible to reduce greatly the stack usage in pcre_exec(). If the group is preceded by OP_BRAZERO, convert this to OP_BRAPOSZERO. Then, if the minimum number of matches is 1 or 0, cancel the possessive flag so that the default action below, of wrapping everything inside atomic brackets, does not happen. When the minimum is greater than 1, there will be earlier copies of the group, and so we still have to wrap the whole thing. */ else { PCRE2_UCHAR *ketcode = code - 1 - LINK_SIZE; PCRE2_UCHAR *bracode = ketcode - GET(ketcode, 1); /* Convert possessive ONCE brackets to non-capturing */ if ((*bracode == OP_ONCE || *bracode == OP_ONCE_NC) && possessive_quantifier) *bracode = OP_BRA; /* For non-possessive ONCE brackets, all we need to do is to set the KET. */ if (*bracode == OP_ONCE || *bracode == OP_ONCE_NC) *ketcode = OP_KETRMAX + repeat_type; /* Handle non-ONCE brackets and possessive ONCEs (which have been converted to non-capturing above). */ else { /* In the compile phase, check for empty string matching. */ if (lengthptr == NULL) { PCRE2_UCHAR *scode = bracode; do { if (could_be_empty_branch(scode, ketcode, utf, cb, NULL)) { *bracode += OP_SBRA - OP_BRA; break; } scode += GET(scode, 1); } while (*scode == OP_ALT); } /* Handle possessive quantifiers. */ if (possessive_quantifier) { /* For COND brackets, we wrap the whole thing in a possessively repeated non-capturing bracket, because we have not invented POS versions of the COND opcodes. Because we are moving code along, we must ensure that any pending recursive references are updated. */ if (*bracode == OP_COND || *bracode == OP_SCOND) { int nlen = (int)(code - bracode); *code = OP_END; adjust_recurse(bracode, 1 + LINK_SIZE, utf, cb, save_hwm); memmove(bracode + 1 + LINK_SIZE, bracode, CU2BYTES(nlen)); code += 1 + LINK_SIZE; nlen += 1 + LINK_SIZE; *bracode = OP_BRAPOS; *code++ = OP_KETRPOS; PUTINC(code, 0, nlen); PUT(bracode, 1, nlen); } /* For non-COND brackets, we modify the BRA code and use KETRPOS. */ else { *bracode += 1; /* Switch to xxxPOS opcodes */ *ketcode = OP_KETRPOS; } /* If the minimum is zero, mark it as possessive, then unset the possessive flag when the minimum is 0 or 1. */ if (brazeroptr != NULL) *brazeroptr = OP_BRAPOSZERO; if (repeat_min < 2) possessive_quantifier = FALSE; } /* Non-possessive quantifier */ else *ketcode = OP_KETRMAX + repeat_type; } } } /* If previous is OP_FAIL, it was generated by an empty class [] (PCRE2_ALLOW_EMPTY_CLASS is set). The other ways in which OP_FAIL can be generated, that is by (*FAIL) or (?!), set previous to NULL, which gives a "nothing to repeat" error above. We can just ignore the repeat in empty class case. */ else if (*previous == OP_FAIL) goto END_REPEAT; /* Else there's some kind of shambles */ else { *errorcodeptr = ERR10; goto FAILED; } /* If the character following a repeat is '+', possessive_quantifier is TRUE. For some opcodes, there are special alternative opcodes for this case. For anything else, we wrap the entire repeated item inside OP_ONCE brackets. Logically, the '+' notation is just syntactic sugar, taken from Sun's Java package, but the special opcodes can optimize it. Some (but not all) possessively repeated subpatterns have already been completely handled in the code just above. For them, possessive_quantifier is always FALSE at this stage. Note that the repeated item starts at tempcode, not at previous, which might be the first part of a string whose (former) last char we repeated. */ if (possessive_quantifier) { int len; /* Possessifying an EXACT quantifier has no effect, so we can ignore it. However, QUERY, STAR, or UPTO may follow (for quantifiers such as {5,6}, {5,}, or {5,10}). We skip over an EXACT item; if the length of what remains is greater than zero, there's a further opcode that can be handled. If not, do nothing, leaving the EXACT alone. */ switch(*tempcode) { case OP_TYPEEXACT: tempcode += PRIV(OP_lengths)[*tempcode] + ((tempcode[1 + IMM2_SIZE] == OP_PROP || tempcode[1 + IMM2_SIZE] == OP_NOTPROP)? 2 : 0); break; /* CHAR opcodes are used for exacts whose count is 1. */ case OP_CHAR: case OP_CHARI: case OP_NOT: case OP_NOTI: case OP_EXACT: case OP_EXACTI: case OP_NOTEXACT: case OP_NOTEXACTI: tempcode += PRIV(OP_lengths)[*tempcode]; #ifdef SUPPORT_UTF if (utf && HAS_EXTRALEN(tempcode[-1])) tempcode += GET_EXTRALEN(tempcode[-1]); #endif break; /* For the class opcodes, the repeat operator appears at the end; adjust tempcode to point to it. */ case OP_CLASS: case OP_NCLASS: tempcode += 1 + 32/sizeof(PCRE2_UCHAR); break; #ifdef SUPPORT_WIDE_CHARS case OP_XCLASS: tempcode += GET(tempcode, 1); break; #endif } /* If tempcode is equal to code (which points to the end of the repeated item), it means we have skipped an EXACT item but there is no following QUERY, STAR, or UPTO; the value of len will be 0, and we do nothing. In all other cases, tempcode will be pointing to the repeat opcode, and will be less than code, so the value of len will be greater than 0. */ len = (int)(code - tempcode); if (len > 0) { unsigned int repcode = *tempcode; /* There is a table for possessifying opcodes, all of which are less than OP_CALLOUT. A zero entry means there is no possessified version. */ if (repcode < OP_CALLOUT && opcode_possessify[repcode] > 0) *tempcode = opcode_possessify[repcode]; /* For opcode without a special possessified version, wrap the item in ONCE brackets. Because we are moving code along, we must ensure that any pending recursive references are updated. */ else { *code = OP_END; adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cb, save_hwm); memmove(tempcode + 1 + LINK_SIZE, tempcode, CU2BYTES(len)); code += 1 + LINK_SIZE; len += 1 + LINK_SIZE; tempcode[0] = OP_ONCE; *code++ = OP_KET; PUTINC(code, 0, len); PUT(tempcode, 1, len); } } } /* In all case we no longer have a previous item. We also set the "follows varying string" flag for subsequently encountered reqcus if it isn't already set and we have just passed a varying length item. */ END_REPEAT: previous = NULL; cb->req_varyopt |= reqvary; break; /* ===================================================================*/ /* Start of nested parenthesized sub-expression, or comment or lookahead or lookbehind or option setting or condition or all the other extended parenthesis forms. */ case CHAR_LEFT_PARENTHESIS: newoptions = options; skipbytes = 0; bravalue = OP_CBRA; save_hwm = cb->hwm; reset_bracount = FALSE; /* First deal with various "verbs" that can be introduced by '*'. */ ptr++; if (ptr[0] == CHAR_ASTERISK && (ptr[1] == ':' || (MAX_255(ptr[1]) && ((cb->ctypes[ptr[1]] & ctype_letter) != 0)))) { int i, namelen; int arglen = 0; const char *vn = verbnames; PCRE2_SPTR name = ptr + 1; PCRE2_SPTR arg = NULL; previous = NULL; ptr++; while (MAX_255(*ptr) && (cb->ctypes[*ptr] & ctype_letter) != 0) ptr++; namelen = (int)(ptr - name); /* It appears that Perl allows any characters whatsoever, other than a closing parenthesis, to appear in arguments, so we no longer insist on letters, digits, and underscores. */ if (*ptr == CHAR_COLON) { arg = ++ptr; while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++; arglen = (int)(ptr - arg); if ((unsigned int)arglen > MAX_MARK) { *errorcodeptr = ERR76; goto FAILED; } } if (*ptr != CHAR_RIGHT_PARENTHESIS) { *errorcodeptr = ERR60; goto FAILED; } /* Scan the table of verb names */ for (i = 0; i < verbcount; i++) { if (namelen == verbs[i].len && PRIV(strncmp_c8)(name, vn, namelen) == 0) { int setverb; /* Check for open captures before ACCEPT and convert it to ASSERT_ACCEPT if in an assertion. */ if (verbs[i].op == OP_ACCEPT) { open_capitem *oc; if (arglen != 0) { *errorcodeptr = ERR59; goto FAILED; } cb->had_accept = TRUE; for (oc = cb->open_caps; oc != NULL; oc = oc->next) { *code++ = OP_CLOSE; PUT2INC(code, 0, oc->number); } setverb = *code++ = (cb->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT; /* Do not set firstcu after *ACCEPT */ if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; } /* Handle other cases with/without an argument */ else if (arglen == 0) { if (verbs[i].op < 0) /* Argument is mandatory */ { *errorcodeptr = ERR66; goto FAILED; } setverb = *code++ = verbs[i].op; } else { if (verbs[i].op_arg < 0) /* Argument is forbidden */ { *errorcodeptr = ERR59; goto FAILED; } setverb = *code++ = verbs[i].op_arg; *code++ = arglen; memcpy(code, arg, CU2BYTES(arglen)); code += arglen; *code++ = 0; } switch (setverb) { case OP_THEN: case OP_THEN_ARG: cb->external_flags |= PCRE2_HASTHEN; break; case OP_PRUNE: case OP_PRUNE_ARG: case OP_SKIP: case OP_SKIP_ARG: cb->had_pruneorskip = TRUE; break; } break; /* Found verb, exit loop */ } vn += verbs[i].len + 1; } if (i < verbcount) continue; /* Successfully handled a verb */ *errorcodeptr = ERR60; /* Verb not recognized */ goto FAILED; } /* Deal with the extended parentheses; all are introduced by '?', and the appearance of any of them means that this is not a capturing group. */ else if (*ptr == CHAR_QUESTION_MARK) { int i, set, unset, namelen; int *optset; PCRE2_SPTR name; PCRE2_UCHAR *slot; switch (*(++ptr)) { case CHAR_NUMBER_SIGN: /* Comment; skip to ket */ ptr++; while (ptr < cb->end_pattern && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++; if (*ptr != CHAR_RIGHT_PARENTHESIS) { *errorcodeptr = ERR18; goto FAILED; } continue; /* ------------------------------------------------------------ */ case CHAR_VERTICAL_LINE: /* Reset capture count for each branch */ reset_bracount = TRUE; /* Fall through */ /* ------------------------------------------------------------ */ case CHAR_COLON: /* Non-capturing bracket */ bravalue = OP_BRA; ptr++; break; /* ------------------------------------------------------------ */ case CHAR_LEFT_PARENTHESIS: bravalue = OP_COND; /* Conditional group */ tempptr = ptr; /* A condition can be an assertion, a number (referring to a numbered group's having been set), a name (referring to a named group), or 'R', referring to recursion. R and R&name are also permitted for recursion tests. There are ways of testing a named group: (?(name)) is used by Python; Perl 5.10 onwards uses (?() or (?('name')). There is one unfortunate ambiguity, caused by history. 'R' can be the recursive thing or the name 'R' (and similarly for 'R' followed by digits). We look for a name first; if not found, we try the other case. For compatibility with auto-callouts, we allow a callout to be specified before a condition that is an assertion. First, check for the syntax of a callout; if found, adjust the temporary pointer that is used to check for an assertion condition. That's all that is needed! */ if (ptr[1] == CHAR_QUESTION_MARK && ptr[2] == CHAR_C) { for (i = 3;; i++) if (!IS_DIGIT(ptr[i])) break; if (ptr[i] == CHAR_RIGHT_PARENTHESIS) tempptr += i + 1; } /* For conditions that are assertions, check the syntax, and then exit the switch. This will take control down to where bracketed groups, including assertions, are processed. */ if (tempptr[1] == CHAR_QUESTION_MARK && (tempptr[2] == CHAR_EQUALS_SIGN || tempptr[2] == CHAR_EXCLAMATION_MARK || tempptr[2] == CHAR_LESS_THAN_SIGN)) break; /* Other conditions use OP_CREF/OP_DNCREF/OP_RREF/OP_DNRREF, and all need to skip at least 1+IMM2_SIZE bytes at the start of the group. */ code[1+LINK_SIZE] = OP_CREF; skipbytes = 1+IMM2_SIZE; refsign = -1; /* => not a number */ namelen = -1; /* => not a name; must set to avoid warning */ name = NULL; /* Always set to avoid warning */ recno = 0; /* Always set to avoid warning */ /* Check for a test for recursion in a named group. */ ptr++; if (*ptr == CHAR_R && ptr[1] == CHAR_AMPERSAND) { terminator = -1; ptr += 2; code[1+LINK_SIZE] = OP_RREF; /* Change the type of test */ } /* Check for a test for a named group's having been set, using the Perl syntax (?() or (?('name'), and also allow for the original PCRE syntax of (?(name) or for (?(+n), (?(-n), and just (?(n). */ else if (*ptr == CHAR_LESS_THAN_SIGN) { terminator = CHAR_GREATER_THAN_SIGN; ptr++; } else if (*ptr == CHAR_APOSTROPHE) { terminator = CHAR_APOSTROPHE; ptr++; } else { terminator = CHAR_NULL; if (*ptr == CHAR_MINUS || *ptr == CHAR_PLUS) refsign = *ptr++; else if (IS_DIGIT(*ptr)) refsign = 0; } /* Handle a number */ if (refsign >= 0) { while (IS_DIGIT(*ptr)) { recno = recno * 10 + (int)(*ptr - CHAR_0); ptr++; } } /* Otherwise we expect to read a name; anything else is an error. When a name is one of a number of duplicates, a different opcode is used and it needs more memory. Unfortunately we cannot tell whether a name is a duplicate in the first pass, so we have to allow for more memory. */ else { if (IS_DIGIT(*ptr)) { *errorcodeptr = ERR44; /* Group name must start with non-digit */ goto FAILED; } if (!MAX_255(*ptr) || (cb->ctypes[*ptr] & ctype_word) == 0) { *errorcodeptr = ERR28; /* Assertion expected */ goto FAILED; } name = ptr++; while (MAX_255(*ptr) && (cb->ctypes[*ptr] & ctype_word) != 0) { ptr++; } namelen = (int)(ptr - name); if (lengthptr != NULL && (options & PCRE2_DUPNAMES) != 0) *lengthptr += IMM2_SIZE; } /* Check the terminator */ if ((terminator > 0 && *ptr++ != (PCRE2_UCHAR)terminator) || *ptr++ != CHAR_RIGHT_PARENTHESIS) { ptr--; /* Error offset */ *errorcodeptr = ERR26; /* Malformed number or name */ goto FAILED; } /* Do no further checking in the pre-compile phase. */ if (lengthptr != NULL) break; /* In the real compile we do the work of looking for the actual reference. If refsign is not negative, it means we have a number in recno. */ if (refsign >= 0) { if (recno <= 0) { *errorcodeptr = ERR35; goto FAILED; } if (refsign != 0) recno = (refsign == CHAR_MINUS)? cb->bracount - recno + 1 : recno + cb->bracount; if (recno <= 0 || recno > cb->final_bracount) { *errorcodeptr = ERR15; goto FAILED; } PUT2(code, 2+LINK_SIZE, recno); break; } /* Otherwise look for the name. */ slot = cb->name_table; for (i = 0; i < cb->names_found; i++) { if (PRIV(strncmp)(name, slot+IMM2_SIZE, namelen) == 0) break; slot += cb->name_entry_size; } /* Found the named subpattern. If the name is duplicated, add one to the opcode to change CREF/RREF into DNCREF/DNRREF and insert appropriate data values. Otherwise, just insert the unique subpattern number. */ if (i < cb->names_found) { int offset = i++; int count = 1; recno = GET2(slot, 0); /* Number from first found */ for (; i < cb->names_found; i++) { slot += cb->name_entry_size; if (PRIV(strncmp)(name, slot+IMM2_SIZE, namelen) != 0 || (slot+IMM2_SIZE)[namelen] != 0) break; count++; } if (count > 1) { PUT2(code, 2+LINK_SIZE, offset); PUT2(code, 2+LINK_SIZE+IMM2_SIZE, count); skipbytes += IMM2_SIZE; code[1+LINK_SIZE]++; } else /* Not a duplicated name */ { PUT2(code, 2+LINK_SIZE, recno); } } /* If terminator == CHAR_NULL it means that the name followed directly after the opening parenthesis [e.g. (?(abc)...] and in this case there are some further alternatives to try. For the cases where terminator != CHAR_NULL [things like (?(... or (?('name')... or (?(R&name)... ] we have now checked all the possibilities, so give an error. */ else if (terminator != CHAR_NULL) { *errorcodeptr = ERR15; goto FAILED; } /* Check for (?(R) for recursion. Allow digits after R to specify a specific group number. */ else if (*name == CHAR_R) { recno = 0; for (i = 1; i < namelen; i++) { if (!IS_DIGIT(name[i])) { *errorcodeptr = ERR15; goto FAILED; } recno = recno * 10 + name[i] - CHAR_0; } if (recno == 0) recno = RREF_ANY; code[1+LINK_SIZE] = OP_RREF; /* Change test type */ PUT2(code, 2+LINK_SIZE, recno); } /* Similarly, check for the (?(DEFINE) "condition", which is always false. */ else if (namelen == 6 && PRIV(strncmp_c8)(name, STRING_DEFINE, 6) == 0) { code[1+LINK_SIZE] = OP_DEF; skipbytes = 1; } /* Reference to an unidentified subpattern. */ else { *errorcodeptr = ERR15; goto FAILED; } break; /* ------------------------------------------------------------ */ case CHAR_EQUALS_SIGN: /* Positive lookahead */ bravalue = OP_ASSERT; cb->assert_depth += 1; ptr++; break; /* Optimize (?!) to (*FAIL) unless it is quantified - which is a weird thing to do, but Perl allows all assertions to be quantified, and when they contain capturing parentheses there may be a potential use for this feature. Not that that applies to a quantified (?!) but we allow it for uniformity. */ /* ------------------------------------------------------------ */ case CHAR_EXCLAMATION_MARK: /* Negative lookahead */ ptr++; if (*ptr == CHAR_RIGHT_PARENTHESIS && ptr[1] != CHAR_ASTERISK && ptr[1] != CHAR_PLUS && ptr[1] != CHAR_QUESTION_MARK && (ptr[1] != CHAR_LEFT_CURLY_BRACKET || !is_counted_repeat(ptr+2))) { *code++ = OP_FAIL; previous = NULL; continue; } bravalue = OP_ASSERT_NOT; cb->assert_depth += 1; break; /* ------------------------------------------------------------ */ case CHAR_LESS_THAN_SIGN: /* Lookbehind or named define */ switch (ptr[1]) { case CHAR_EQUALS_SIGN: /* Positive lookbehind */ bravalue = OP_ASSERTBACK; cb->assert_depth += 1; ptr += 2; break; case CHAR_EXCLAMATION_MARK: /* Negative lookbehind */ bravalue = OP_ASSERTBACK_NOT; cb->assert_depth += 1; ptr += 2; break; default: /* Could be name define, else bad */ if (MAX_255(ptr[1]) && (cb->ctypes[ptr[1]] & ctype_word) != 0) goto DEFINE_NAME; ptr++; /* Correct offset for error */ *errorcodeptr = ERR24; goto FAILED; } break; /* ------------------------------------------------------------ */ case CHAR_GREATER_THAN_SIGN: /* One-time brackets */ bravalue = OP_ONCE; ptr++; break; /* ------------------------------------------------------------ */ case CHAR_C: /* Callout - may be followed by digits; */ previous_callout = code; /* Save for later completion */ after_manual_callout = 1; /* Skip one item before completing */ *code++ = OP_CALLOUT; { int n = 0; ptr++; while(IS_DIGIT(*ptr)) n = n * 10 + *ptr++ - CHAR_0; if (*ptr != CHAR_RIGHT_PARENTHESIS) { *errorcodeptr = ERR39; goto FAILED; } if (n > 255) { *errorcodeptr = ERR38; goto FAILED; } *code++ = n; PUT(code, 0, (int)(ptr - cb->start_pattern + 1)); /* Pattern offset */ PUT(code, LINK_SIZE, 0); /* Default length */ code += 2 * LINK_SIZE; } previous = NULL; continue; /* ------------------------------------------------------------ */ case CHAR_P: /* Python-style named subpattern handling */ if (*(++ptr) == CHAR_EQUALS_SIGN || *ptr == CHAR_GREATER_THAN_SIGN) /* Reference or recursion */ { is_recurse = *ptr == CHAR_GREATER_THAN_SIGN; terminator = CHAR_RIGHT_PARENTHESIS; goto NAMED_REF_OR_RECURSE; } else if (*ptr != CHAR_LESS_THAN_SIGN) /* Test for Python-style defn */ { *errorcodeptr = ERR41; goto FAILED; } /* Fall through to handle (?P< as (?< is handled */ /* ------------------------------------------------------------ */ DEFINE_NAME: /* Come here from (?< handling */ case CHAR_APOSTROPHE: terminator = (*ptr == CHAR_LESS_THAN_SIGN)? CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE; name = ++ptr; if (IS_DIGIT(*ptr)) { *errorcodeptr = ERR44; /* Group name must start with non-digit */ goto FAILED; } while (MAX_255(*ptr) && (cb->ctypes[*ptr] & ctype_word) != 0) ptr++; namelen = (int)(ptr - name); /* In the pre-compile phase, do a syntax check, remember the longest name, and then remember the group in a vector, expanding it if necessary. Duplicates for the same number are skipped; other duplicates are checked for validity. In the actual compile, there is nothing to do. */ if (lengthptr != NULL) { named_group *ng; uint32_t number = cb->bracount + 1; if (*ptr != (PCRE2_UCHAR)terminator) { *errorcodeptr = ERR42; goto FAILED; } if (cb->names_found >= MAX_NAME_COUNT) { *errorcodeptr = ERR49; goto FAILED; } if (namelen + IMM2_SIZE + 1 > cb->name_entry_size) { cb->name_entry_size = namelen + IMM2_SIZE + 1; if (namelen > MAX_NAME_SIZE) { *errorcodeptr = ERR48; goto FAILED; } } /* Scan the list to check for duplicates. For duplicate names, if the number is the same, break the loop, which causes the name to be discarded; otherwise, if DUPNAMES is not set, give an error. If it is set, allow the name with a different number, but continue scanning in case this is a duplicate with the same number. For non-duplicate names, give an error if the number is duplicated. */ ng = cb->named_groups; for (i = 0; i < cb->names_found; i++, ng++) { if (namelen == ng->length && PRIV(strncmp)(name, ng->name, namelen) == 0) { if (ng->number == number) break; if ((options & PCRE2_DUPNAMES) == 0) { *errorcodeptr = ERR43; goto FAILED; } cb->dupnames = TRUE; /* Duplicate names exist */ } else if (ng->number == number) { *errorcodeptr = ERR65; goto FAILED; } } if (i >= cb->names_found) /* Not a duplicate with same number */ { /* Increase the list size if necessary */ if (cb->names_found >= cb->named_group_list_size) { int newsize = cb->named_group_list_size * 2; named_group *newspace = cb->cx->memctl.malloc(newsize * sizeof(named_group), cb->cx->memctl.memory_data); if (newspace == NULL) { *errorcodeptr = ERR21; goto FAILED; } memcpy(newspace, cb->named_groups, cb->named_group_list_size * sizeof(named_group)); if (cb->named_group_list_size > NAMED_GROUP_LIST_SIZE) cb->cx->memctl.free((void *)cb->named_groups, cb->cx->memctl.memory_data); cb->named_groups = newspace; cb->named_group_list_size = newsize; } cb->named_groups[cb->names_found].name = name; cb->named_groups[cb->names_found].length = namelen; cb->named_groups[cb->names_found].number = number; cb->names_found++; } } ptr++; /* Move past > or ' in both passes. */ goto NUMBERED_GROUP; /* ------------------------------------------------------------ */ case CHAR_AMPERSAND: /* Perl recursion/subroutine syntax */ terminator = CHAR_RIGHT_PARENTHESIS; is_recurse = TRUE; /* Fall through */ /* We come here from the Python syntax above that handles both references (?P=name) and recursion (?P>name), as well as falling through from the Perl recursion syntax (?&name). We also come here from the Perl \k or \k'name' back reference syntax and the \k{name} .NET syntax, and the Oniguruma \g<...> and \g'...' subroutine syntax. */ NAMED_REF_OR_RECURSE: name = ++ptr; if (IS_DIGIT(*ptr)) { *errorcodeptr = ERR44; /* Group name must start with non-digit */ goto FAILED; } while (MAX_255(*ptr) && (cb->ctypes[*ptr] & ctype_word) != 0) ptr++; namelen = (int)(ptr - name); /* In the pre-compile phase, do a syntax check. We used to just set a dummy reference number, because it was not used in the first pass. However, with the change of recursive back references to be atomic, we have to look for the number so that this state can be identified, as otherwise the incorrect length is computed. If it's not a backwards reference, the dummy number will do. */ if (lengthptr != NULL) { named_group *ng; if (namelen == 0) { *errorcodeptr = ERR62; goto FAILED; } if (*ptr != (PCRE2_UCHAR)terminator) { *errorcodeptr = ERR42; goto FAILED; } if (namelen > MAX_NAME_SIZE) { *errorcodeptr = ERR48; goto FAILED; } /* The name table does not exist in the first pass; instead we must scan the list of names encountered so far in order to get the number. If the name is not found, set the value to 0 for a forward reference. */ ng = cb->named_groups; for (i = 0; i < cb->names_found; i++, ng++) { if (namelen == ng->length && PRIV(strncmp)(name, ng->name, namelen) == 0) break; } recno = (i < cb->names_found)? ng->number : 0; /* Count named back references. */ if (!is_recurse) cb->namedrefcount++; /* If duplicate names are permitted, we have to allow for a named reference to a duplicated name (this cannot be determined until the second pass). This needs an extra 16-bit data item. */ if ((options & PCRE2_DUPNAMES) != 0) *lengthptr += IMM2_SIZE; } /* In the real compile, search the name table. We check the name first, and then check that we have reached the end of the name in the table. That way, if the name is longer than any in the table, the comparison will fail without reading beyond the table entry. */ else { slot = cb->name_table; for (i = 0; i < cb->names_found; i++) { if (PRIV(strncmp)(name, slot+IMM2_SIZE, namelen) == 0 && slot[IMM2_SIZE+namelen] == 0) break; slot += cb->name_entry_size; } if (i < cb->names_found) { recno = GET2(slot, 0); } else { *errorcodeptr = ERR15; goto FAILED; } } /* In both phases, for recursions, we can now go to the code than handles numerical recursion. */ if (is_recurse) goto HANDLE_RECURSION; /* In the second pass we must see if the name is duplicated. If so, we generate a different opcode. */ if (lengthptr == NULL && cb->dupnames) { int count = 1; unsigned int index = i; PCRE2_UCHAR *cslot = slot + cb->name_entry_size; for (i++; i < cb->names_found; i++) { if (PRIV(strcmp)(slot + IMM2_SIZE, cslot + IMM2_SIZE) != 0) break; count++; cslot += cb->name_entry_size; } if (count > 1) { if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; previous = code; *code++ = ((options & PCRE2_CASELESS) != 0)? OP_DNREFI : OP_DNREF; PUT2INC(code, 0, index); PUT2INC(code, 0, count); /* Process each potentially referenced group. */ for (; slot < cslot; slot += cb->name_entry_size) { open_capitem *oc; recno = GET2(slot, 0); cb->backref_map |= (recno < 32)? (1 << recno) : 1; if (recno > cb->top_backref) cb->top_backref = recno; /* Check to see if this back reference is recursive, that it, it is inside the group that it references. A flag is set so that the group can be made atomic. */ for (oc = cb->open_caps; oc != NULL; oc = oc->next) { if (oc->number == recno) { oc->flag = TRUE; break; } } } continue; /* End of back ref handling */ } } /* First pass, or a non-duplicated name. */ goto HANDLE_REFERENCE; /* ------------------------------------------------------------ */ case CHAR_R: /* Recursion */ ptr++; /* Same as (?0) */ /* Fall through */ /* ------------------------------------------------------------ */ case CHAR_MINUS: case CHAR_PLUS: /* Recursion or subroutine */ case CHAR_0: case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5: case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9: { PCRE2_SPTR called; terminator = CHAR_RIGHT_PARENTHESIS; /* Come here from the \g<...> and \g'...' code (Oniguruma compatibility). However, the syntax has been checked to ensure that the ... are a (signed) number, so that neither ERR63 nor ERR29 will be called on this path, nor with the jump to OTHER_CHAR_AFTER_QUERY ever be taken. */ HANDLE_NUMERICAL_RECURSION: if ((refsign = *ptr) == CHAR_PLUS) { ptr++; if (!IS_DIGIT(*ptr)) { *errorcodeptr = ERR63; goto FAILED; } } else if (refsign == CHAR_MINUS) { if (!IS_DIGIT(ptr[1])) goto OTHER_CHAR_AFTER_QUERY; ptr++; } recno = 0; while(IS_DIGIT(*ptr)) recno = recno * 10 + *ptr++ - CHAR_0; if (*ptr != (PCRE2_UCHAR)terminator) { *errorcodeptr = ERR29; goto FAILED; } if (refsign == CHAR_MINUS) { if (recno == 0) { *errorcodeptr = ERR58; goto FAILED; } recno = cb->bracount - recno + 1; if (recno <= 0) { *errorcodeptr = ERR15; goto FAILED; } } else if (refsign == CHAR_PLUS) { if (recno == 0) { *errorcodeptr = ERR58; goto FAILED; } recno += cb->bracount; } /* Come here from code above that handles a named recursion */ HANDLE_RECURSION: previous = code; called = cb->start_code; /* When we are actually compiling, find the bracket that is being referenced. Temporarily end the regex in case it doesn't exist before this point. If we end up with a forward reference, first check that the bracket does occur later so we can give the error (and position) now. Then remember this forward reference in the workspace so it can be filled in at the end. */ if (lengthptr == NULL) { *code = OP_END; if (recno != 0) called = PRIV(find_bracket)(cb->start_code, utf, recno); /* Forward reference */ if (called == NULL) { if (recno > cb->final_bracount) { *errorcodeptr = ERR15; goto FAILED; } /* Fudge the value of "called" so that when it is inserted as an offset below, what it actually inserted is the reference number of the group. Then remember the forward reference. */ called = cb->start_code + recno; if (cb->hwm >= cb->start_workspace + cb->workspace_size - WORK_SIZE_SAFETY_MARGIN) { *errorcodeptr = expand_workspace(cb); if (*errorcodeptr != 0) goto FAILED; } PUTINC(cb->hwm, 0, (int)(code + 1 - cb->start_code)); } /* If not a forward reference, and the subpattern is still open, this is a recursive call. We check to see if this is a left recursion that could loop for ever, and diagnose that case. We must not, however, do this check if we are in a conditional subpattern because the condition might be testing for recursion in a pattern such as /(?(R)a+|(?R)b)/, which is perfectly valid. Forever loops are also detected at runtime, so those that occur in conditional subpatterns will be picked up then. */ else if (GET(called, 1) == 0 && cond_depth <= 0 && could_be_empty(called, code, bcptr, utf, cb)) { *errorcodeptr = ERR40; goto FAILED; } } /* Insert the recursion/subroutine item. It does not have a set first character (relevant if it is repeated, because it will then be wrapped with ONCE brackets). */ *code = OP_RECURSE; PUT(code, 1, (int)(called - cb->start_code)); code += 1 + LINK_SIZE; groupsetfirstcu = FALSE; } /* Can't determine a first byte now */ if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; continue; /* ------------------------------------------------------------ */ default: /* Other characters: check option setting */ OTHER_CHAR_AFTER_QUERY: set = unset = 0; optset = &set; while (*ptr != CHAR_RIGHT_PARENTHESIS && *ptr != CHAR_COLON) { switch (*ptr++) { case CHAR_MINUS: optset = &unset; break; case CHAR_J: /* Record that it changed in the external options */ *optset |= PCRE2_DUPNAMES; cb->external_flags |= PCRE2_JCHANGED; break; case CHAR_i: *optset |= PCRE2_CASELESS; break; case CHAR_m: *optset |= PCRE2_MULTILINE; break; case CHAR_s: *optset |= PCRE2_DOTALL; break; case CHAR_x: *optset |= PCRE2_EXTENDED; break; case CHAR_U: *optset |= PCRE2_UNGREEDY; break; default: *errorcodeptr = ERR11; ptr--; /* Correct the offset */ goto FAILED; } } /* Set up the changed option bits, but don't change anything yet. */ newoptions = (options | set) & (~unset); /* If the options ended with ')' this is not the start of a nested group with option changes, so the options change at this level. If this item is right at the start of the pattern, the options can be abstracted and made external in the pre-compile phase, and ignored in the compile phase. This can be helpful when matching -- for instance in caseless checking of required bytes. If the code pointer is not (cb->start_code + 1 + LINK_SIZE), we are definitely *not* at the start of the pattern because something has been compiled. In the pre-compile phase, however, the code pointer can have that value after the start, because it gets reset as code is discarded during the pre-compile. However, this can happen only at top level - if we are within parentheses, the starting BRA will still be present. At any parenthesis level, the length value can be used to test if anything has been compiled at that level. Thus, a test for both these conditions is necessary to ensure we correctly detect the start of the pattern in both phases. If we are not at the pattern start, reset the greedy defaults and the case value for firstcu and reqcu. */ if (*ptr == CHAR_RIGHT_PARENTHESIS) { if (code == cb->start_code + 1 + LINK_SIZE && (lengthptr == NULL || *lengthptr == 2 + 2*LINK_SIZE)) { cb->external_options = newoptions; } else { greedy_default = ((newoptions & PCRE2_UNGREEDY) != 0); greedy_non_default = greedy_default ^ 1; req_caseopt = ((newoptions & PCRE2_CASELESS) != 0)? REQ_CASELESS:0; } /* Change options at this level, and pass them back for use in subsequent branches. */ *optionsptr = options = newoptions; previous = NULL; /* This item can't be repeated */ continue; /* It is complete */ } /* If the options ended with ':' we are heading into a nested group with possible change of options. Such groups are non-capturing and are not assertions of any kind. All we need to do is skip over the ':'; the newoptions value is handled below. */ bravalue = OP_BRA; ptr++; } /* End of switch for character following (? */ } /* End of (? handling */ /* Opening parenthesis not followed by '*' or '?'. If PCRE2_NO_AUTO_CAPTURE is set, all unadorned brackets become non-capturing and behave like (?:...) brackets. */ else if ((options & PCRE2_NO_AUTO_CAPTURE) != 0) { bravalue = OP_BRA; } /* Else we have a capturing group. */ else { NUMBERED_GROUP: cb->bracount += 1; PUT2(code, 1+LINK_SIZE, cb->bracount); skipbytes = IMM2_SIZE; } /* Process nested bracketed regex. First check for parentheses nested too deeply. */ if ((cb->parens_depth += 1) > PARENS_NEST_LIMIT) { *errorcodeptr = ERR19; goto FAILED; } /* Assertions used not to be repeatable, but this was changed for Perl compatibility, so all kinds can now be repeated. We copy code into a non-register variable (tempcode) in order to be able to pass its address because some compilers complain otherwise. */ previous = code; /* For handling repetition */ *code = bravalue; tempcode = code; tempreqvary = cb->req_varyopt; /* Save value before bracket */ tempbracount = cb->bracount; /* Save value before bracket */ length_prevgroup = 0; /* Initialize for pre-compile phase */ if (!compile_regex( newoptions, /* The complete new option state */ &tempcode, /* Where to put code (updated) */ &ptr, /* Input pointer (updated) */ errorcodeptr, /* Where to put an error message */ (bravalue == OP_ASSERTBACK || bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */ reset_bracount, /* True if (?| group */ skipbytes, /* Skip over bracket number */ cond_depth + ((bravalue == OP_COND)?1:0), /* Depth of condition subpatterns */ &subfirstcu, /* For possible first char */ &subfirstcuflags, &subreqcu, /* For possible last char */ &subreqcuflags, bcptr, /* Current branch chain */ cb, /* Compile data block */ (lengthptr == NULL)? NULL : /* Actual compile phase */ &length_prevgroup /* Pre-compile phase */ )) goto FAILED; cb->parens_depth -= 1; /* If this was an atomic group and there are no capturing groups within it, generate OP_ONCE_NC instead of OP_ONCE. */ if (bravalue == OP_ONCE && cb->bracount <= tempbracount) *code = OP_ONCE_NC; if (bravalue >= OP_ASSERT && bravalue <= OP_ASSERTBACK_NOT) cb->assert_depth -= 1; /* At the end of compiling, code is still pointing to the start of the group, while tempcode has been updated to point past the end of the group. The pattern pointer (ptr) is on the bracket. If this is a conditional bracket, check that there are no more than two branches in the group, or just one if it's a DEFINE group. We do this in the real compile phase, not in the pre-pass, where the whole group may not be available. */ if (bravalue == OP_COND && lengthptr == NULL) { PCRE2_UCHAR *tc = code; int condcount = 0; do { condcount++; tc += GET(tc,1); } while (*tc != OP_KET); /* A DEFINE group is never obeyed inline (the "condition" is always false). It must have only one branch. */ if (code[LINK_SIZE+1] == OP_DEF) { if (condcount > 1) { *errorcodeptr = ERR54; goto FAILED; } bravalue = OP_DEF; /* Just a flag to suppress char handling below */ } /* A "normal" conditional group. If there is just one branch, we must not make use of its firstcu or reqcu, because this is equivalent to an empty second branch. */ else { if (condcount > 2) { *errorcodeptr = ERR27; goto FAILED; } if (condcount == 1) subfirstcuflags = subreqcuflags = REQ_NONE; } } /* Error if hit end of pattern */ if (*ptr != CHAR_RIGHT_PARENTHESIS) { *errorcodeptr = ERR14; goto FAILED; } /* In the pre-compile phase, update the length by the length of the group, less the brackets at either end. Then reduce the compiled code to just a set of non-capturing brackets so that it doesn't use much memory if it is duplicated by a quantifier.*/ if (lengthptr != NULL) { if (OFLOW_MAX - *lengthptr < length_prevgroup - 2 - 2*LINK_SIZE) { *errorcodeptr = ERR20; goto FAILED; } *lengthptr += length_prevgroup - 2 - 2*LINK_SIZE; code++; /* This already contains bravalue */ PUTINC(code, 0, 1 + LINK_SIZE); *code++ = OP_KET; PUTINC(code, 0, 1 + LINK_SIZE); break; /* No need to waste time with special character handling */ } /* Otherwise update the main code pointer to the end of the group. */ code = tempcode; /* For a DEFINE group, required and first character settings are not relevant. */ if (bravalue == OP_DEF) break; /* Handle updating of the required and first characters for other types of group. Update for normal brackets of all kinds, and conditions with two branches (see code above). If the bracket is followed by a quantifier with zero repeat, we have to back off. Hence the definition of zeroreqcu and zerofirstcu outside the main loop so that they can be accessed for the back off. */ zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; groupsetfirstcu = FALSE; if (bravalue >= OP_ONCE) { /* If we have not yet set a firstcu in this branch, take it from the subpattern, remembering that it was set here so that a repeat of more than one can replicate it as reqcu if necessary. If the subpattern has no firstcu, set "none" for the whole branch. In both cases, a zero repeat forces firstcu to "none". */ if (firstcuflags == REQ_UNSET) { if (subfirstcuflags >= 0) { firstcu = subfirstcu; firstcuflags = subfirstcuflags; groupsetfirstcu = TRUE; } else firstcuflags = REQ_NONE; zerofirstcuflags = REQ_NONE; } /* If firstcu was previously set, convert the subpattern's firstcu into reqcu if there wasn't one, using the vary flag that was in existence beforehand. */ else if (subfirstcuflags >= 0 && subreqcuflags < 0) { subreqcu = subfirstcu; subreqcuflags = subfirstcuflags | tempreqvary; } /* If the subpattern set a required byte (or set a first byte that isn't really the first byte - see above), set it. */ if (subreqcuflags >= 0) { reqcu = subreqcu; reqcuflags = subreqcuflags; } } /* For a forward assertion, we take the reqcu, if set. This can be helpful if the pattern that follows the assertion doesn't set a different char. For example, it's useful for /(?=abcde).+/. We can't set firstcu for an assertion, however because it leads to incorrect effect for patterns such as /(?=a)a.+/ when the "real" "a" would then become a reqcu instead of a firstcu. This is overcome by a scan at the end if there's no firstcu, looking for an asserted first char. */ else if (bravalue == OP_ASSERT && subreqcuflags >= 0) { reqcu = subreqcu; reqcuflags = subreqcuflags; } break; /* End of processing '(' */ /* ===================================================================*/ /* Handle metasequences introduced by \. For ones like \d, the ESC_ values are arranged to be the negation of the corresponding OP_values in the default case when PCRE2_UCP is not set. For the back references, the values are negative the reference number. Only back references and those types that consume a character may be repeated. We can test for values between ESC_b and ESC_Z for the latter; this may have to change if any new ones are ever created. */ case CHAR_BACKSLASH: tempptr = ptr; escape = check_escape(&ptr, &ec, errorcodeptr, options, FALSE, cb); if (*errorcodeptr != 0) goto FAILED; if (escape == 0) /* The escape coded a single character */ c = ec; else { if (escape == ESC_Q) /* Handle start of quoted string */ { if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E) ptr += 2; /* avoid empty string */ else inescq = TRUE; continue; } if (escape == ESC_E) continue; /* Perl ignores an orphan \E */ /* For metasequences that actually match a character, we disable the setting of a first character if it hasn't already been set. */ if (firstcuflags == REQ_UNSET && escape > ESC_b && escape < ESC_Z) firstcuflags = REQ_NONE; /* Set values to reset to if this is followed by a zero repeat. */ zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; /* \g or \g'name' is a subroutine call by name and \g or \g'n' is a subroutine call by number (Oniguruma syntax). In fact, the value ESC_g is returned only for these cases. So we don't need to check for < or ' if the value is ESC_g. For the Perl syntax \g{n} the value is -n, and for the Perl syntax \g{name} the result is ESC_k (as that is a synonym for a named back reference). */ if (escape == ESC_g) { PCRE2_SPTR p; uint32_t cf; save_hwm = cb->hwm; /* Normally this is set when '(' is read */ terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)? CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE; /* These two statements stop the compiler for warning about possibly unset variables caused by the jump to HANDLE_NUMERICAL_RECURSION. In fact, because we do the check for a number below, the paths that would actually be in error are never taken. */ skipbytes = 0; reset_bracount = FALSE; /* If it's not a signed or unsigned number, treat it as a name. */ cf = ptr[1]; if (cf != CHAR_PLUS && cf != CHAR_MINUS && !IS_DIGIT(cf)) { is_recurse = TRUE; goto NAMED_REF_OR_RECURSE; } /* Signed or unsigned number (cf = ptr[1]) is known to be plus or minus or a digit. */ p = ptr + 2; while (IS_DIGIT(*p)) p++; if (*p != (PCRE2_UCHAR)terminator) { *errorcodeptr = ERR57; break; } ptr++; goto HANDLE_NUMERICAL_RECURSION; } /* \k or \k'name' is a back reference by name (Perl syntax). We also support \k{name} (.NET syntax). */ if (escape == ESC_k) { if ((ptr[1] != CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_APOSTROPHE && ptr[1] != CHAR_LEFT_CURLY_BRACKET)) { *errorcodeptr = ERR69; break; } is_recurse = FALSE; terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)? CHAR_GREATER_THAN_SIGN : (*ptr == CHAR_APOSTROPHE)? CHAR_APOSTROPHE : CHAR_RIGHT_CURLY_BRACKET; goto NAMED_REF_OR_RECURSE; } /* Back references are handled specially; must disable firstcu if not set to cope with cases like (?=(\w+))\1: which would otherwise set ':' later. */ if (escape < 0) { open_capitem *oc; recno = -escape; /* Come here from named backref handling when the reference is to a single group (i.e. not to a duplicated name. */ HANDLE_REFERENCE: if (firstcuflags == REQ_UNSET) firstcuflags = REQ_NONE; previous = code; *code++ = ((options & PCRE2_CASELESS) != 0)? OP_REFI : OP_REF; PUT2INC(code, 0, recno); cb->backref_map |= (recno < 32)? (1 << recno) : 1; if (recno > cb->top_backref) cb->top_backref = recno; /* Check to see if this back reference is recursive, that it, it is inside the group that it references. A flag is set so that the group can be made atomic. */ for (oc = cb->open_caps; oc != NULL; oc = oc->next) { if (oc->number == recno) { oc->flag = TRUE; break; } } } /* So are Unicode property matches, if supported. */ #ifdef SUPPORT_UTF else if (escape == ESC_P || escape == ESC_p) { BOOL negated; unsigned int ptype = 0, pdata = 0; if (!get_ucp(&ptr, &negated, &ptype, &pdata, errorcodeptr, cb)) goto FAILED; previous = code; *code++ = ((escape == ESC_p) != negated)? OP_PROP : OP_NOTPROP; *code++ = ptype; *code++ = pdata; } #else /* If Unicode properties are not supported, \X, \P, and \p are not allowed. */ else if (escape == ESC_X || escape == ESC_P || escape == ESC_p) { *errorcodeptr = ERR45; goto FAILED; } #endif /* For the rest (including \X when Unicode properties are supported), we can obtain the OP value by negating the escape value in the default situation when PCRE2_UCP is not set. When it *is* set, we substitute Unicode property tests. Note that \b and \B do a one-character lookbehind, and \A also behaves as if it does. */ else { if ((escape == ESC_b || escape == ESC_B || escape == ESC_A) && cb->max_lookbehind == 0) cb->max_lookbehind = 1; #ifdef SUPPORT_UTF if (escape >= ESC_DU && escape <= ESC_wu) { nestptr = ptr + 1; /* Where to resume */ ptr = substitutes[escape - ESC_DU] - 1; /* Just before substitute */ } else #endif /* In non-UTF mode, we turn \C into OP_ALLANY instead of OP_ANYBYTE so that it works in DFA mode and in lookbehinds. */ { previous = (escape > ESC_b && escape < ESC_Z)? code : NULL; *code++ = (!utf && escape == ESC_C)? OP_ALLANY : escape; } } continue; } /* We have a data character whose value is in c. In UTF-8 mode it may have a value > 127. We set its representation in the length/buffer, and then handle it as a data character. */ mclength = PUTCHAR(c, mcbuffer); goto ONE_CHAR; /* ===================================================================*/ /* Handle a literal character. It is guaranteed not to be whitespace or # when the extended flag is set. If we are in a UTF mode, it may be a multi-unit literal character. */ default: NORMAL_CHAR: mclength = 1; mcbuffer[0] = c; #ifdef SUPPORT_UTF if (utf && HAS_EXTRALEN(c)) ACROSSCHAR(TRUE, ptr[1], mcbuffer[mclength++] = *(++ptr)); #endif /* At this point we have the character's bytes in mcbuffer, and the length in mclength. When not in UTF mode, the length is always 1. */ ONE_CHAR: previous = code; /* For caseless UTF mode, check whether this character has more than one other case. If so, generate a special OP_PROP item instead of OP_CHARI. */ #ifdef SUPPORT_UTF if (utf && (options & PCRE2_CASELESS) != 0) { GETCHAR(c, mcbuffer); if ((c = UCD_CASESET(c)) != 0) { *code++ = OP_PROP; *code++ = PT_CLIST; *code++ = c; if (firstcuflags == REQ_UNSET) firstcuflags = zerofirstcuflags = REQ_NONE; break; } } #endif /* Caseful matches, or not one of the multicase characters. */ *code++ = ((options & PCRE2_CASELESS) != 0)? OP_CHARI : OP_CHAR; for (c = 0; c < mclength; c++) *code++ = mcbuffer[c]; /* Remember if \r or \n were seen */ if (mcbuffer[0] == CHAR_CR || mcbuffer[0] == CHAR_NL) cb->external_flags |= PCRE2_HASCRORLF; /* Set the first and required bytes appropriately. If no previous first byte, set it from this character, but revert to none on a zero repeat. Otherwise, leave the firstcu value alone, and don't change it on a zero repeat. */ if (firstcuflags == REQ_UNSET) { zerofirstcuflags = REQ_NONE; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; /* If the character is more than one byte long, we can set firstcu only if it is not to be matched caselessly. */ if (mclength == 1 || req_caseopt == 0) { firstcu = mcbuffer[0] | req_caseopt; firstcu = mcbuffer[0]; firstcuflags = req_caseopt; if (mclength != 1) { reqcu = code[-1]; reqcuflags = cb->req_varyopt; } } else firstcuflags = reqcuflags = REQ_NONE; } /* firstcu was previously set; we can set reqcu only if the length is 1 or the matching is caseful. */ else { zerofirstcu = firstcu; zerofirstcuflags = firstcuflags; zeroreqcu = reqcu; zeroreqcuflags = reqcuflags; if (mclength == 1 || req_caseopt == 0) { reqcu = code[-1]; reqcuflags = req_caseopt | cb->req_varyopt; } } break; /* End of literal character handling */ } } /* end of big loop */ /* Control never reaches here by falling through, only by a goto for all the error states. Pass back the position in the pattern so that it can be displayed to the user for diagnosing the error. */ FAILED: *ptrptr = ptr; return FALSE; } /************************************************* * Compile regex: a sequence of alternatives * *************************************************/ /* On entry, ptr is pointing past the bracket character, but on return it points to the closing bracket, or vertical bar, or end of string. The code variable is pointing at the byte into which the BRA operator has been stored. This function is used during the pre-compile phase when we are trying to find out the amount of memory needed, as well as during the real compile phase. The value of lengthptr distinguishes the two phases. Arguments: options option bits, including any changes for this subpattern codeptr -> the address of the current code pointer ptrptr -> the address of the current pattern pointer errorcodeptr -> pointer to error code variable lookbehind TRUE if this is a lookbehind assertion reset_bracount TRUE to reset the count for each branch skipunits skip this many code units at start (for brackets and OP_COND) cond_depth depth of nesting for conditional subpatterns firstcuptr place to put the first required code unit firstcuflagsptr place to put the first code unit flags, or a negative number reqcuptr place to put the last required code unit reqcuflagsptr place to put the last required code unit flags, or a negative number bcptr pointer to the chain of currently open branches cb points to the data block with tables pointers etc. lengthptr NULL during the real compile phase points to length accumulator during pre-compile phase Returns: TRUE on success */ static BOOL compile_regex(uint32_t options, PCRE2_UCHAR **codeptr, PCRE2_SPTR *ptrptr, int *errorcodeptr, BOOL lookbehind, BOOL reset_bracount, int skipunits, int cond_depth, uint32_t *firstcuptr, int32_t *firstcuflagsptr, uint32_t *reqcuptr, int32_t *reqcuflagsptr, branch_chain *bcptr, compile_block *cb, size_t *lengthptr) { PCRE2_SPTR ptr = *ptrptr; PCRE2_UCHAR *code = *codeptr; PCRE2_UCHAR *last_branch = code; PCRE2_UCHAR *start_bracket = code; PCRE2_UCHAR *reverse_count = NULL; open_capitem capitem; int capnumber = 0; uint32_t firstcu, reqcu; int32_t firstcuflags, reqcuflags; uint32_t branchfirstcu, branchreqcu; int32_t branchfirstcuflags, branchreqcuflags; size_t length; unsigned int orig_bracount; unsigned int max_bracount; branch_chain bc; /* If set, call the external function that checks for stack availability. */ if (cb->cx->stack_guard != NULL && cb->cx->stack_guard(cb->parens_depth)) { *errorcodeptr= ERR33; return FALSE; } /* Miscellaneous initialization */ bc.outer = bcptr; bc.current_branch = code; firstcu = reqcu = 0; firstcuflags = reqcuflags = REQ_UNSET; /* Accumulate the length for use in the pre-compile phase. Start with the length of the BRA and KET and any extra code units that are required at the beginning. We accumulate in a local variable to save frequent testing of lengthptr for NULL. We cannot do this by looking at the value of 'code' at the start and end of each alternative, because compiled items are discarded during the pre-compile phase so that the work space is not exceeded. */ length = 2 + 2*LINK_SIZE + skipunits; /* WARNING: If the above line is changed for any reason, you must also change the code that abstracts option settings at the start of the pattern and makes them global. It tests the value of length for (2 + 2*LINK_SIZE) in the pre-compile phase to find out whether or not anything has yet been compiled. If this is a capturing subpattern, add to the chain of open capturing items so that we can detect them if (*ACCEPT) is encountered. This is also used to detect groups that contain recursive back references to themselves. Note that only OP_CBRA need be tested here; changing this opcode to one of its variants, e.g. OP_SCBRAPOS, happens later, after the group has been compiled. */ if (*code == OP_CBRA) { capnumber = GET2(code, 1 + LINK_SIZE); capitem.number = capnumber; capitem.next = cb->open_caps; capitem.flag = FALSE; cb->open_caps = &capitem; } /* Offset is set zero to mark that this bracket is still open */ PUT(code, 1, 0); code += 1 + LINK_SIZE + skipunits; /* Loop for each alternative branch */ orig_bracount = max_bracount = cb->bracount; for (;;) { /* For a (?| group, reset the capturing bracket count so that each branch uses the same numbers. */ if (reset_bracount) cb->bracount = orig_bracount; /* Set up dummy OP_REVERSE if lookbehind assertion */ if (lookbehind) { *code++ = OP_REVERSE; reverse_count = code; PUTINC(code, 0, 0); length += 1 + LINK_SIZE; } /* Now compile the branch; in the pre-compile phase its length gets added into the length. */ if (!compile_branch(&options, &code, &ptr, errorcodeptr, &branchfirstcu, &branchfirstcuflags, &branchreqcu, &branchreqcuflags, &bc, cond_depth, cb, (lengthptr == NULL)? NULL : &length)) { *ptrptr = ptr; return FALSE; } /* Keep the highest bracket count in case (?| was used and some branch has fewer than the rest. */ if (cb->bracount > max_bracount) max_bracount = cb->bracount; /* In the real compile phase, there is some post-processing to be done. */ if (lengthptr == NULL) { /* If this is the first branch, the firstcu and reqcu values for the branch become the values for the regex. */ if (*last_branch != OP_ALT) { firstcu = branchfirstcu; firstcuflags = branchfirstcuflags; reqcu = branchreqcu; reqcuflags = branchreqcuflags; } /* If this is not the first branch, the first char and reqcu have to match the values from all the previous branches, except that if the previous value for reqcu didn't have REQ_VARY set, it can still match, and we set REQ_VARY for the regex. */ else { /* If we previously had a firstcu, but it doesn't match the new branch, we have to abandon the firstcu for the regex, but if there was previously no reqcu, it takes on the value of the old firstcu. */ if (firstcuflags >= 0 && (firstcuflags != branchfirstcuflags || firstcu != branchfirstcu)) { if (reqcuflags < 0) { reqcu = firstcu; reqcuflags = firstcuflags; } firstcuflags = REQ_NONE; } /* If we (now or from before) have no firstcu, a firstcu from the branch becomes a reqcu if there isn't a branch reqcu. */ if (firstcuflags < 0 && branchfirstcuflags >= 0 && branchreqcuflags < 0) { branchreqcu = branchfirstcu; branchreqcuflags = branchfirstcuflags; } /* Now ensure that the reqcus match */ if (((reqcuflags & ~REQ_VARY) != (branchreqcuflags & ~REQ_VARY)) || reqcu != branchreqcu) reqcuflags = REQ_NONE; else { reqcu = branchreqcu; reqcuflags |= branchreqcuflags; /* To "or" REQ_VARY */ } } /* If lookbehind, check that this branch matches a fixed-length string, and put the length into the OP_REVERSE item. Temporarily mark the end of the branch with OP_END. If the branch contains OP_RECURSE, the result is -3 because there may be forward references that we can't check here. Set a flag to cause another lookbehind check at the end. Why not do it all at the end? Because common, erroneous checks are picked up here and the offset of the problem can be shown. */ if (lookbehind) { int fixed_length; *code = OP_END; fixed_length = find_fixedlength(last_branch, (options & PCRE2_UTF) != 0, FALSE, cb); if (fixed_length == -3) { cb->check_lookbehind = TRUE; } else if (fixed_length < 0) { *errorcodeptr = (fixed_length == -2)? ERR36 : (fixed_length == -4)? ERR70: ERR25; *ptrptr = ptr; return FALSE; } else { if (fixed_length > cb->max_lookbehind) cb->max_lookbehind = fixed_length; PUT(reverse_count, 0, fixed_length); } } } /* Reached end of expression, either ')' or end of pattern. In the real compile phase, go back through the alternative branches and reverse the chain of offsets, with the field in the BRA item now becoming an offset to the first alternative. If there are no alternatives, it points to the end of the group. The length in the terminating ket is always the length of the whole bracketed item. Return leaving the pointer at the terminating char. */ if (*ptr != CHAR_VERTICAL_LINE) { if (lengthptr == NULL) { size_t branch_length = code - last_branch; do { size_t prev_length = GET(last_branch, 1); PUT(last_branch, 1, branch_length); branch_length = prev_length; last_branch -= branch_length; } while (branch_length > 0); } /* Fill in the ket */ *code = OP_KET; PUT(code, 1, (int)(code - start_bracket)); code += 1 + LINK_SIZE; /* If it was a capturing subpattern, check to see if it contained any recursive back references. If so, we must wrap it in atomic brackets. Because we are moving code along, we must ensure that any pending recursive references are updated. In any event, remove the block from the chain. */ if (capnumber > 0) { if (cb->open_caps->flag) { *code = OP_END; adjust_recurse(start_bracket, 1 + LINK_SIZE, (options & PCRE2_UTF) != 0, cb, cb->hwm); memmove(start_bracket + 1 + LINK_SIZE, start_bracket, CU2BYTES(code - start_bracket)); *start_bracket = OP_ONCE; code += 1 + LINK_SIZE; PUT(start_bracket, 1, (int)(code - start_bracket)); *code = OP_KET; PUT(code, 1, (int)(code - start_bracket)); code += 1 + LINK_SIZE; length += 2 + 2*LINK_SIZE; } cb->open_caps = cb->open_caps->next; } /* Retain the highest bracket number, in case resetting was used. */ cb->bracount = max_bracount; /* Set values to pass back */ *codeptr = code; *ptrptr = ptr; *firstcuptr = firstcu; *firstcuflagsptr = firstcuflags; *reqcuptr = reqcu; *reqcuflagsptr = reqcuflags; if (lengthptr != NULL) { if (OFLOW_MAX - *lengthptr < length) { *errorcodeptr = ERR20; return FALSE; } *lengthptr += length; } return TRUE; } /* Another branch follows. In the pre-compile phase, we can move the code pointer back to where it was for the start of the first branch. (That is, pretend that each branch is the only one.) In the real compile phase, insert an ALT node. Its length field points back to the previous branch while the bracket remains open. At the end the chain is reversed. It's done like this so that the start of the bracket has a zero offset until it is closed, making it possible to detect recursion. */ if (lengthptr != NULL) { code = *codeptr + 1 + LINK_SIZE + skipunits; length += 1 + LINK_SIZE; } else { *code = OP_ALT; PUT(code, 1, (int)(code - last_branch)); bc.current_branch = last_branch = code; code += 1 + LINK_SIZE; } /* Advance past the vertical bar */ ptr++; } /* Control never reaches here */ } /************************************************* * Check for anchored pattern * *************************************************/ /* Try to find out if this is an anchored regular expression. Consider each alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then it's anchored. However, if this is a multiline pattern, then only OP_SOD will be found, because ^ generates OP_CIRCM in that mode. We can also consider a regex to be anchored if OP_SOM starts all its branches. This is the code for \G, which means "match at start of match position, taking into account the match offset". A branch is also implicitly anchored if it starts with .* and DOTALL is set, because that will try the rest of the pattern at all possible matching points, so there is no point trying again.... er .... .... except when the .* appears inside capturing parentheses, and there is a subsequent back reference to those parentheses. We haven't enough information to catch that case precisely. At first, the best we could do was to detect when .* was in capturing brackets and the highest back reference was greater than or equal to that level. However, by keeping a bitmap of the first 31 back references, we can catch some of the more common cases more precisely. ... A second exception is when the .* appears inside an atomic group, because this prevents the number of characters it matches from being adjusted. Arguments: code points to start of the compiled pattern bracket_map a bitmap of which brackets we are inside while testing; this handles up to substring 31; after that we just have to take the less precise approach cb points to the compile data block atomcount atomic group level Returns: TRUE or FALSE */ static BOOL is_anchored(register PCRE2_SPTR code, unsigned int bracket_map, compile_block *cb, int atomcount) { do { PCRE2_SPTR scode = first_significant_code( code + PRIV(OP_lengths)[*code], FALSE); register int op = *scode; /* Non-capturing brackets */ if (op == OP_BRA || op == OP_BRAPOS || op == OP_SBRA || op == OP_SBRAPOS) { if (!is_anchored(scode, bracket_map, cb, atomcount)) return FALSE; } /* Capturing brackets */ else if (op == OP_CBRA || op == OP_CBRAPOS || op == OP_SCBRA || op == OP_SCBRAPOS) { int n = GET2(scode, 1+LINK_SIZE); int new_map = bracket_map | ((n < 32)? (1 << n) : 1); if (!is_anchored(scode, new_map, cb, atomcount)) return FALSE; } /* Positive forward assertions and conditions */ else if (op == OP_ASSERT || op == OP_COND) { if (!is_anchored(scode, bracket_map, cb, atomcount)) return FALSE; } /* Atomic groups */ else if (op == OP_ONCE || op == OP_ONCE_NC) { if (!is_anchored(scode, bracket_map, cb, atomcount + 1)) return FALSE; } /* .* is not anchored unless DOTALL is set (which generates OP_ALLANY) and it isn't in brackets that are or may be referenced or inside an atomic group. */ else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR || op == OP_TYPEPOSSTAR)) { if (scode[1] != OP_ALLANY || (bracket_map & cb->backref_map) != 0 || atomcount > 0 || cb->had_pruneorskip) return FALSE; } /* Check for explicit anchoring */ else if (op != OP_SOD && op != OP_SOM && op != OP_CIRC) return FALSE; code += GET(code, 1); } while (*code == OP_ALT); /* Loop for each alternative */ return TRUE; } /************************************************* * Check for starting with ^ or .* * *************************************************/ /* This is called to find out if every branch starts with ^ or .* so that "first char" processing can be done to speed things up in multiline matching and for non-DOTALL patterns that start with .* (which must start at the beginning or after \n). As in the case of is_anchored() (see above), we have to take account of back references to capturing brackets that contain .* because in that case we can't make the assumption. Also, the appearance of .* inside atomic brackets or in a pattern that contains *PRUNE or *SKIP does not count, because once again the assumption no longer holds. Arguments: code points to start of the compiled pattern bracket_map a bitmap of which brackets we are inside while testing; this handles up to substring 31; after that we just have to take the less precise approach cb points to the compile data atomcount atomic group level Returns: TRUE or FALSE */ static BOOL is_startline(PCRE2_SPTR code, unsigned int bracket_map, compile_block *cb, int atomcount) { do { PCRE2_SPTR scode = first_significant_code( code + PRIV(OP_lengths)[*code], FALSE); register int op = *scode; /* If we are at the start of a conditional assertion group, *both* the conditional assertion *and* what follows the condition must satisfy the test for start of line. Other kinds of condition fail. Note that there may be an auto-callout at the start of a condition. */ if (op == OP_COND) { scode += 1 + LINK_SIZE; if (*scode == OP_CALLOUT) scode += PRIV(OP_lengths)[OP_CALLOUT]; switch (*scode) { case OP_CREF: case OP_DNCREF: case OP_RREF: case OP_DNRREF: case OP_DEF: return FALSE; default: /* Assertion */ if (!is_startline(scode, bracket_map, cb, atomcount)) return FALSE; do scode += GET(scode, 1); while (*scode == OP_ALT); scode += 1 + LINK_SIZE; break; } scode = first_significant_code(scode, FALSE); op = *scode; } /* Non-capturing brackets */ if (op == OP_BRA || op == OP_BRAPOS || op == OP_SBRA || op == OP_SBRAPOS) { if (!is_startline(scode, bracket_map, cb, atomcount)) return FALSE; } /* Capturing brackets */ else if (op == OP_CBRA || op == OP_CBRAPOS || op == OP_SCBRA || op == OP_SCBRAPOS) { int n = GET2(scode, 1+LINK_SIZE); int new_map = bracket_map | ((n < 32)? (1 << n) : 1); if (!is_startline(scode, new_map, cb, atomcount)) return FALSE; } /* Positive forward assertions */ else if (op == OP_ASSERT) { if (!is_startline(scode, bracket_map, cb, atomcount)) return FALSE; } /* Atomic brackets */ else if (op == OP_ONCE || op == OP_ONCE_NC) { if (!is_startline(scode, bracket_map, cb, atomcount + 1)) return FALSE; } /* .* means "start at start or after \n" if it isn't in atomic brackets or brackets that may be referenced, as long as the pattern does not contain *PRUNE or *SKIP, because these break the feature. Consider, for example, /.*?a(*PRUNE)b/ with the subject "aab", which matches "ab", i.e. not at the start of a line. */ else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR || op == OP_TYPEPOSSTAR) { if (scode[1] != OP_ANY || (bracket_map & cb->backref_map) != 0 || atomcount > 0 || cb->had_pruneorskip) return FALSE; } /* Check for explicit circumflex; anything else gives a FALSE result. Note in particular that this includes atomic brackets OP_ONCE and OP_ONCE_NC because the number of characters matched by .* cannot be adjusted inside them. */ else if (op != OP_CIRC && op != OP_CIRCM) return FALSE; /* Move on to the next alternative */ code += GET(code, 1); } while (*code == OP_ALT); /* Loop for each alternative */ return TRUE; } /************************************************* * Check for asserted fixed first code unit * *************************************************/ /* During compilation, the "first code unit" settings from forward assertions are discarded, because they can cause conflicts with actual literals that follow. However, if we end up without a first code unit setting for an unanchored pattern, it is worth scanning the regex to see if there is an initial asserted first code unit. If all branches start with the same asserted code unit, or with a non-conditional bracket all of whose alternatives start with the same asserted code unit (recurse ad lib), then we return that code unit, with the flags set to zero or REQ_CASELESS; otherwise return zero with REQ_NONE in the flags. Arguments: code points to start of compiled pattern flags points to the first code unit flags inassert TRUE if in an assertion Returns: the fixed first code unit, or 0 with REQ_NONE in flags */ static uint32_t find_firstassertedcu(PCRE2_SPTR code, int32_t *flags, BOOL inassert) { register uint32_t c = 0; int cflags = REQ_NONE; *flags = REQ_NONE; do { uint32_t d; int dflags; int xl = (*code == OP_CBRA || *code == OP_SCBRA || *code == OP_CBRAPOS || *code == OP_SCBRAPOS)? IMM2_SIZE:0; PCRE2_SPTR scode = first_significant_code(code + 1+LINK_SIZE + xl, TRUE); register PCRE2_UCHAR op = *scode; switch(op) { default: return 0; case OP_BRA: case OP_BRAPOS: case OP_CBRA: case OP_SCBRA: case OP_CBRAPOS: case OP_SCBRAPOS: case OP_ASSERT: case OP_ONCE: case OP_ONCE_NC: d = find_firstassertedcu(scode, &dflags, op == OP_ASSERT); if (dflags < 0) return 0; if (cflags < 0) { c = d; cflags = dflags; } else if (c != d || cflags != dflags) return 0; break; case OP_EXACT: scode += IMM2_SIZE; /* Fall through */ case OP_CHAR: case OP_PLUS: case OP_MINPLUS: case OP_POSPLUS: if (!inassert) return 0; if (cflags < 0) { c = scode[1]; cflags = 0; } else if (c != scode[1]) return 0; break; case OP_EXACTI: scode += IMM2_SIZE; /* Fall through */ case OP_CHARI: case OP_PLUSI: case OP_MINPLUSI: case OP_POSPLUSI: if (!inassert) return 0; if (cflags < 0) { c = scode[1]; cflags = REQ_CASELESS; } else if (c != scode[1]) return 0; break; } code += GET(code, 1); } while (*code == OP_ALT); *flags = cflags; return c; } /************************************************* * Add an entry to the name/number table * *************************************************/ /* This function is called between compiling passes to add an entry to the name/number table, maintaining alphabetical order. Checking for permitted and forbidden duplicates has already been done. Arguments: cb the compile data block name the name to add length the length of the name groupno the group number Returns: nothing */ static void add_name_to_table(compile_block *cb, PCRE2_SPTR name, int length, unsigned int groupno) { int i; PCRE2_UCHAR *slot = cb->name_table; for (i = 0; i < cb->names_found; i++) { int crc = memcmp(name, slot+IMM2_SIZE, CU2BYTES(length)); if (crc == 0 && slot[IMM2_SIZE+length] != 0) crc = -1; /* Current name is a substring */ /* Make space in the table and break the loop for an earlier name. For a duplicate or later name, carry on. We do this for duplicates so that in the simple case (when ?(| is not used) they are in order of their numbers. In all cases they are in the order in which they appear in the pattern. */ if (crc < 0) { memmove(slot + cb->name_entry_size, slot, CU2BYTES((cb->names_found - i) * cb->name_entry_size)); break; } /* Continue the loop for a later or duplicate name */ slot += cb->name_entry_size; } PUT2(slot, 0, groupno); memcpy(slot + IMM2_SIZE, name, CU2BYTES(length)); slot[IMM2_SIZE + length] = 0; cb->names_found++; } /************************************************* * External function to compile a pattern * *************************************************/ /* This function reads a regular expression in the form of a string and returns a pointer to a block of store holding a compiled version of the expression. Arguments: pattern the regular expression patlen the length of the pattern, or < 0 for zero-terminated options option bits errorptr pointer to errorcode erroroffset pointer to error offset ccontext points to a compile context or is NULL Returns: pointer to compiled data block, or NULL on error, with errorcode and erroroffset set */ PCRE2_EXP_DEFN pcre2_code * PCRE2_CALL_CONVENTION pcre2_compile(PCRE2_SPTR pattern, PCRE2_SIZE patlen, uint32_t options, int *errorptr, PCRE2_SIZE *erroroffset, pcre2_compile_context *ccontext) { BOOL utf; /* Set TRUE for UTF mode */ pcre2_real_code *re = NULL; /* What we will return */ pcre2_compile_context default_context; /* For use if no context given */ compile_block cb; /* "Static" compile-time data */ const uint8_t *tables; /* Char tables base pointer */ PCRE2_UCHAR *code; /* Current pointer in compiled code */ PCRE2_SPTR codestart; /* Start of compiled code */ PCRE2_SPTR ptr; /* Current pointer in pattern */ size_t length = 1; /* Allow or final END opcode */ size_t re_blocksize; /* Size of memory block */ int32_t firstcuflags, reqcuflags; /* Type of first/req code unit */ uint32_t firstcu, reqcu; /* Value of first/req code unit */ uint32_t setflags = 0; /* NL and BSR set flags */ uint32_t skipatstart; /* When checking (*UTF) etc */ uint32_t limit_match = UINT32_MAX; /* Unset match limits */ uint32_t limit_recursion = UINT32_MAX; int newline = 0; /* Unset; can be set by the pattern */ int bsr = 0; /* Unset; can be set by the pattern */ int errorcode = 0; /* Initialize to avoid compiler warn */ /* Comments at the head of this file explain about these variables. */ PCRE2_UCHAR *copied_pattern = NULL; PCRE2_UCHAR stack_copied_pattern[COPIED_PATTERN_SIZE]; PCRE2_UCHAR cworkspace[COMPILE_WORK_SIZE]; named_group named_groups[NAMED_GROUP_LIST_SIZE]; /* -------------- Check arguments and set up the pattern ----------------- */ /* There must be error code and offset pointers. */ if (errorptr == NULL || erroroffset == NULL) return NULL; *errorptr = ERR0; *erroroffset = 0; /* There must be a pattern! */ if (pattern == NULL) { *errorptr = ERR16; return NULL; } /* Check that all undefined public option bits are zero. */ if ((options & ~PUBLIC_COMPILE_OPTIONS) != 0) { *errorptr = ERR17; return NULL; } /* A NULL compile context means "use a default context" */ if (ccontext == NULL) { PRIV(compile_context_init)(&default_context, TRUE); ccontext = &default_context; } /* A zero-terminated pattern is indicated by the special length value PCRE2_ZERO_TERMINATED. Otherwise, we make a copy of the pattern and add a zero, to ensure that it is always possible to look one code unit beyond the end of the pattern's characters. */ if (patlen == PCRE2_ZERO_TERMINATED) patlen = PRIV(strlen)(pattern); else { if (patlen < COPIED_PATTERN_SIZE) copied_pattern = stack_copied_pattern; else { copied_pattern = ccontext->memctl.malloc(CU2BYTES(patlen + 1), ccontext->memctl.memory_data); if (copied_pattern == NULL) { *errorptr = ERR21; return NULL; } } memcpy(copied_pattern, pattern, CU2BYTES(patlen)); copied_pattern[patlen] = 0; pattern = copied_pattern; } /* ------------ Initialize the "static" compile data -------------- */ tables = (ccontext->tables != NULL)? ccontext->tables : PRIV(default_tables); cb.lcc = tables + lcc_offset; /* Individual */ cb.fcc = tables + fcc_offset; /* character */ cb.cbits = tables + cbits_offset; /* tables */ cb.ctypes = tables + ctypes_offset; cb.assert_depth = 0; cb.bracount = cb.final_bracount = 0; cb.cx = ccontext; cb.dupnames = FALSE; cb.end_pattern = pattern + patlen; cb.external_flags = 0; cb.external_options = options; cb.hwm = cworkspace; cb.max_lookbehind = 0; cb.name_entry_size = 0; cb.name_table = NULL; cb.named_groups = named_groups; cb.named_group_list_size = NAMED_GROUP_LIST_SIZE; cb.namedrefcount = 0; cb.names_found = 0; cb.open_caps = NULL; cb.parens_depth = 0; cb.req_varyopt = 0; cb.start_code = cworkspace; cb.start_pattern = pattern; cb.start_workspace = cworkspace; cb.workspace_size = COMPILE_WORK_SIZE; /* Maximum back reference and backref bitmap. The bitmap records up to 31 back references to help in deciding whether (.*) can be treated as anchored or not. */ cb.top_backref = 0; cb.backref_map = 0; /* --------------- Start looking at the pattern --------------- */ /* Check for global one-time option settings at the start of the pattern, and remember the offset to the actual regex. */ ptr = pattern; skipatstart = 0; while (ptr[skipatstart] == CHAR_LEFT_PARENTHESIS && ptr[skipatstart+1] == CHAR_ASTERISK) { unsigned int i; for (i = 0; i < sizeof(pso_list)/sizeof(pso); i++) { pso *p = pso_list + i; if (PRIV(strncmp_c8)(ptr+skipatstart+2, (char *)(p->name), p->length) == 0) { uint32_t c, pp; skipatstart += p->length + 2; switch(p->type) { case PSO_OPT: cb.external_options |= p->value; break; case PSO_NL: newline = p->value; setflags |= PCRE2_NL_SET; break; case PSO_BSR: bsr = p->value; setflags |= PCRE2_BSR_SET; break; case PSO_LIMM: case PSO_LIMR: c = 0; pp = skipatstart; while (IS_DIGIT(ptr[pp])) { if (c > UINT32_MAX / 10 - 1) break; /* Integer overflow */ c = c*10 + ptr[pp++] - CHAR_0; } if (ptr[pp++] != CHAR_RIGHT_PARENTHESIS) { errorcode = ERR60; goto HAD_ERROR; } if (p->type == PSO_LIMM) limit_match = c; else limit_recursion = c; skipatstart += pp - skipatstart; break; } break; /* Out of the table scan loop */ } } if (i >= sizeof(pso_list)/sizeof(pso)) break; /* Out of pso loop */ } /* End of pattern-start options; advance to start of real regex. */ ptr += skipatstart; /* Can't support UTF or UCP unless PCRE2 has been compiled with UTF support. */ #ifndef SUPPORT_UTF if ((cb.external_options & (PCRE2_UTF|PCRE2_UCP)) != 0) { errorcode = ERR32; goto HAD_ERROR; } #endif /* Check UTF. We have the original options in 'options', with that value as modified by (*UTF) etc in cb->external_options. */ utf = (cb.external_options & PCRE2_UTF) != 0; if (utf) { if ((options & PCRE2_NEVER_UTF) != 0) { errorcode = ERR74; goto HAD_ERROR; } if ((options & PCRE2_NO_UTF_CHECK) == 0 && (errorcode = PRIV(valid_utf)(pattern, patlen, erroroffset)) != 0) goto HAD_ERROR; } /* Check UCP lockout. */ if ((cb.external_options & (PCRE2_UCP|PCRE2_NEVER_UCP)) == (PCRE2_UCP|PCRE2_NEVER_UCP)) { errorcode = ERR75; goto HAD_ERROR; } /* Process the BSR setting. */ if (bsr == 0) bsr = ccontext->bsr_convention; /* Process the newline setting. */ if (newline == 0) newline = ccontext->newline_convention; cb.nltype = NLTYPE_FIXED; switch(newline) { case PCRE2_NEWLINE_CR: cb.nllen = 1; cb.nl[0] = CHAR_CR; break; case PCRE2_NEWLINE_LF: cb.nllen = 1; cb.nl[0] = CHAR_NL; break; case PCRE2_NEWLINE_CRLF: cb.nllen = 2; cb.nl[0] = CHAR_CR; cb.nl[1] = CHAR_NL; break; case PCRE2_NEWLINE_ANY: cb.nltype = NLTYPE_ANY; break; case PCRE2_NEWLINE_ANYCRLF: cb.nltype = NLTYPE_ANYCRLF; break; default: errorcode = ERR56; goto HAD_ERROR; } /* Pretend to compile the pattern while actually just accumulating the amount of memory required in the 'length' variable. This behaviour is triggered by passing a non-NULL final argument to compile_regex(). We pass a block of workspace (cworkspace) for it to compile parts of the pattern into; the compiled code is discarded when it is no longer needed, so hopefully this workspace will never overflow, though there is a test for its doing so. On error, errorcode will be set non-zero, so we don't need to look at the result of the function. The initial options have been put into the cb block so that they can be changed if an option setting is found within the regex right at the beginning. Bringing initial option settings outside can help speed up starting point checks. We still have to pass a separate options variable (the first argument) because that may change as the pattern is processed. */ code = cworkspace; *code = OP_BRA; (void)compile_regex(cb.external_options, &code, &ptr, &errorcode, FALSE, FALSE, 0, 0, &firstcu, &firstcuflags, &reqcu, &reqcuflags, NULL, &cb, &length); if (errorcode != 0) goto HAD_ERROR; if (length > MAX_PATTERN_SIZE) { errorcode = ERR20; goto HAD_ERROR; } /* If there are groups with duplicate names and there are also references by name, we must allow for the possibility of named references to duplicated groups. These require an extra data item each. */ if (cb.dupnames && cb.namedrefcount > 0) length += cb.namedrefcount * IMM2_SIZE * sizeof(PCRE2_UCHAR); /* Compute the size of, and then get and initialize, the data block for storing the compiled pattern and names table. Integer overflow should no longer be possible because nowadays we limit the maximum value of cb.names_found and cb.name_entry_size. */ re_blocksize = sizeof(pcre2_real_code) + CU2BYTES(length + cb.names_found * cb.name_entry_size); re = (pcre2_real_code *) ccontext->memctl.malloc(re_blocksize, ccontext->memctl.memory_data); if (re == NULL) { errorcode = ERR21; goto HAD_ERROR; } re->memctl = ccontext->memctl; re->tables = tables; re->executable_jit = NULL; memset(re->start_bitmap, 0, 32 * sizeof(uint8_t)); re->blocksize = re_blocksize; re->magic_number = MAGIC_NUMBER; re->compile_options = options; re->overall_options = cb.external_options; re->flags = PCRE2_CODE_UNIT_WIDTH/8 | cb.external_flags | setflags; re->limit_match = limit_match; re->limit_recursion = limit_recursion; re->first_codeunit = 0; re->last_codeunit = 0; re->bsr_convention = bsr; re->newline_convention = newline; re->max_lookbehind = re->minlength = 0; re->top_bracket = 0; re->top_backref = 0; re->name_entry_size = cb.name_entry_size; re->name_count = cb.names_found; /* The basic block is immediately followed by the name table, and the compiled code follows after that. */ codestart = (PCRE2_SPTR)((uint8_t *)re + sizeof(pcre2_real_code)) + re->name_entry_size * re->name_count; /* FIXME: Is this necessary? The nullpad field is at the end; it's there to help in the case when a regex compiled on a system with 4-byte pointers is run on another with 8-byte pointers. */ #ifdef FIXME #if PCRE2_CODE_UNIT_WIDTH == 32 re->dummy = 0; #else re->dummy1 = re->dummy2 = re->dummy3 = 0; #endif #endif /* Update the compile data block for the actual compile. The starting points of the name/number translation table and of the code are passed around in the compile data block. The start/end pattern and initial options are already set from the pre-compile phase, as is the name_entry_size field. Reset the bracket count and the names_found field. Also reset the hwm field; this time it's used for remembering forward references to subpatterns. */ cb.final_bracount = cb.bracount; /* Save for checking forward references */ cb.parens_depth = 0; cb.assert_depth = 0; cb.bracount = 0; cb.max_lookbehind = 0; cb.name_table = (PCRE2_UCHAR *)((uint8_t *)re + sizeof(pcre2_real_code)); cb.start_code = codestart; cb.hwm = (PCRE2_UCHAR *)(cb.start_workspace); cb.req_varyopt = 0; cb.had_accept = FALSE; cb.had_pruneorskip = FALSE; cb.check_lookbehind = FALSE; cb.open_caps = NULL; /* If any named groups were found, create the name/number table from the list created in the first pass. If the list was longer than the in-stack list, free the heap memory. */ if (cb.names_found > 0) { int i = cb.names_found; named_group *ng = cb.named_groups; cb.names_found = 0; for (; i > 0; i--, ng++) add_name_to_table(&cb, ng->name, ng->length, ng->number); if (cb.named_group_list_size > NAMED_GROUP_LIST_SIZE) ccontext->memctl.free((void *)cb.named_groups, ccontext->memctl.memory_data); } /* Set up a starting, non-extracting bracket, then compile the expression. On error, errorcode will be set non-zero, so we don't need to look at the result of the function here. */ ptr = pattern + skipatstart; code = (PCRE2_UCHAR *)codestart; *code = OP_BRA; (void)compile_regex(re->overall_options, &code, &ptr, &errorcode, FALSE, FALSE, 0, 0, &firstcu, &firstcuflags, &reqcu, &reqcuflags, NULL, &cb, NULL); re->top_bracket = cb.bracount; re->top_backref = cb.top_backref; re->max_lookbehind = cb.max_lookbehind; #ifdef FIXME /* Is this necessary? Set above */ re->flags = cb.external_flags | PCRE2_MODE; #endif if (cb.had_accept) { reqcu = 0; /* Must disable after (*ACCEPT) */ reqcuflags = REQ_NONE; } /* If we have not reached end of pattern after a successful compile, there's an excess bracket. Otherwise, fill in the final opcode and check for disastrous overflow. */ if (errorcode == 0 && ptr < cb.end_pattern) errorcode = ERR22; *code++ = OP_END; if ((size_t)(code - codestart) > length) errorcode = ERR23; #ifdef SUPPORT_VALGRIND /* If the estimated length exceeds the really used length, mark the extra allocated memory as unaddressable, so that any out-of-bound reads can be detected. */ VALGRIND_MAKE_MEM_NOACCESS(code, (length - (code - codestart)) * sizeof(PCRE2_UCHAR)); #endif /* Fill in any forward references that are required. There may be repeated references; optimize for them, as searching a large regex takes time. */ if (cb.hwm > cb.start_workspace) { int prev_recno = -1; PCRE2_SPTR groupptr = NULL; while (errorcode == 0 && cb.hwm > cb.start_workspace) { int offset, recno; cb.hwm -= LINK_SIZE; offset = GET(cb.hwm, 0); recno = GET(codestart, offset); if (recno != prev_recno) { groupptr = PRIV(find_bracket)(codestart, utf, recno); prev_recno = recno; } if (groupptr == NULL) errorcode = ERR53; else PUT(((PCRE2_UCHAR *)codestart), offset, (int)(groupptr - codestart)); } } /* If the workspace had to be expanded, free the new memory. Set the pointer to NULL to indicate that forward references have been filled in. */ if (cb.workspace_size > COMPILE_WORK_SIZE) ccontext->memctl.free((void *)cb.start_workspace, ccontext->memctl.memory_data); cb.start_workspace = NULL; /* Give an error if there's back reference to a non-existent capturing subpattern. */ if (errorcode == 0 && re->top_backref > re->top_bracket) errorcode = ERR15; /* Unless disabled, check whether any single character iterators can be auto-possessified. The function overwrites the appropriate opcode values, so the type of the pointer must be cast. NOTE: the intermediate variable "temp" is used in this code because at least one compiler gives a warning about loss of "const" attribute if the cast (PCRE2_UCHAR *)codestart is used directly in the function call. */ if ((options & PCRE2_NO_AUTO_POSSESS) == 0) { PCRE2_UCHAR *temp = (PCRE2_UCHAR *)codestart; PRIV(auto_possessify)(temp, utf, &cb); } /* If there were any lookbehind assertions that contained OP_RECURSE (recursions or subroutine calls), a flag is set for them to be checked here, because they may contain forward references. Actual recursions cannot be fixed length, but subroutine calls can. It is done like this so that those without OP_RECURSE that are not fixed length get a diagnosic with a useful offset. The exceptional ones forgo this. We scan the pattern to check that they are fixed length, and set their lengths. */ if (cb.check_lookbehind) { PCRE2_UCHAR *cc = (PCRE2_UCHAR *)codestart; /* Loop, searching for OP_REVERSE items, and process those that do not have their length set. (Actually, it will also re-process any that have a length of zero, but that is a pathological case, and it does no harm.) When we find one, we temporarily terminate the branch it is in while we scan it. */ for (cc = (PCRE2_UCHAR *)PRIV(find_bracket)(codestart, utf, -1); cc != NULL; cc = (PCRE2_UCHAR *)PRIV(find_bracket)(cc, utf, -1)) { if (GET(cc, 1) == 0) { int fixed_length; PCRE2_UCHAR *be = cc - 1 - LINK_SIZE + GET(cc, -LINK_SIZE); int end_op = *be; *be = OP_END; fixed_length = find_fixedlength(cc, utf, TRUE, &cb); *be = end_op; if (fixed_length < 0) { errorcode = (fixed_length == -2)? ERR36 : (fixed_length == -4)? ERR70 : ERR25; break; } if (fixed_length > cb.max_lookbehind) cb.max_lookbehind = fixed_length; PUT(cc, 1, fixed_length); } cc += 1 + LINK_SIZE; } } /* Failed to compile, or error while post-processing. Earlier errors get here via the dreaded goto. */ if (errorcode != 0) { HAD_ERROR: pcre2_code_free(re); re = NULL; *errorptr = errorcode; *erroroffset = (int)(ptr - pattern); goto EXIT; } /* Successful compile. If the anchored option was not passed, set it if we can determine that the pattern is anchored by virtue of ^ characters or \A or anything else, such as starting with non-atomic .* when DOTALL is set and there are no occurrences of *PRUNE or *SKIP. */ if ((re->overall_options & PCRE2_ANCHORED) == 0 && is_anchored(codestart, 0, &cb, 0)) re->overall_options |= PCRE2_ANCHORED; /* If the pattern is still not anchored and we do not have a first code unit, see if there is one that is asserted (these are not saved during the compile because they can cause conflicts with actual literals that follow). */ if ((re->overall_options & PCRE2_ANCHORED) == 0) { if (firstcuflags < 0) firstcu = find_firstassertedcu(codestart, &firstcuflags, FALSE); /* Save the data for a first code unit. */ if (firstcuflags >= 0) { re->first_codeunit = firstcu; re->flags |= PCRE2_FIRSTSET; /* Handle caseless first code units. */ if ((firstcuflags & REQ_CASELESS) != 0) { if (firstcu < 128 || (!utf && firstcu < 255)) { if (cb.fcc[firstcu] != firstcu) re->flags |= PCRE2_FIRSTCASELESS; } /* The first code unit is > 128 in UTF mode, or > 255 otherwise. In 8-bit UTF mode, codepoints in the range 128-255 are introductory code points and cannot have another case. In 16-bit and 32-bit modes, we can check wide characters when UTF (and therefore UCP) is supported. */ #if defined SUPPORT_UTF && PCRE2_CODE_UNIT_WIDTH != 8 else if (firstcu <= MAX_UTF_CODE_POINT && UCD_OTHERCASE(firstcu) != firstcu) re->flags |= PCRE2_FIRSTCASELESS; #endif } } /* When there is no first code unit, see if we can set the PCRE2_STARTLINE flag. This is helpful for multiline matches when all branches start with ^ and also when all branches start with non-atomic .* for non-DOTALL matches when *PRUNE and SKIP are not present. */ else if (is_startline(codestart, 0, &cb, 0)) re->flags |= PCRE2_STARTLINE; } /* Handle the "required code unit", if one is set. In the case of an anchored pattern, do this only if it follows a variable length item in the pattern. */ if (reqcuflags >= 0 && ((re->overall_options & PCRE2_ANCHORED) == 0 || (reqcuflags & REQ_VARY) != 0)) { re->last_codeunit = reqcu; re->flags |= PCRE2_LASTSET; /* Handle caseless required code units as for first code units (above). */ if ((reqcuflags & REQ_CASELESS) != 0) { if (reqcu < 128 || (!utf && reqcu < 255)) { if (cb.fcc[reqcu] != reqcu) re->flags |= PCRE2_LASTCASELESS; } #if defined SUPPORT_UTF && PCRE2_CODE_UNIT_WIDTH != 8 else if (reqcu <= MAX_UTF_CODE_POINT && UCD_OTHERCASE(reqcu) != reqcu) re->flags |= PCRE2_LASTCASELESS; #endif } } /* Check for a pattern than can match an empty string, so that this information can be provided to applications. */ do { if (could_be_empty_branch(codestart, code, utf, &cb, NULL)) { re->flags |= PCRE2_MATCH_EMPTY; break; } codestart += GET(codestart, 1); } while (*codestart == OP_ALT); /* Finally, study the compiled pattern to set up information such as a bitmap of starting code units and a minimum matching length. */ if (PRIV(study)(re) != 0) { errorcode = ERR31; goto HAD_ERROR; } /* Control ends up here in all cases. If memory was obtained for a zero-terminated copy of the pattern, remember to free it before returning. */ EXIT: if (copied_pattern != stack_copied_pattern) ccontext->memctl.free(copied_pattern, ccontext->memctl.memory_data); return re; /* Will be NULL after an error */ } /* End of pcre2_compile.c */