pcre2build man page

Return to the PCRE2 index page.

This page is part of the PCRE2 HTML documentation. It was generated automatically from the original man page. If there is any nonsense in it, please consult the man page, in case the conversion went wrong.

• BUILDING PCRE2
• PCRE2 BUILD-TIME OPTIONS
• BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES
• BUILDING SHARED AND STATIC LIBRARIES
• Unicode and UTF SUPPORT
• JUST-IN-TIME COMPILER SUPPORT
• CODE VALUE OF NEWLINE
• WHAT \R MATCHES
• HANDLING VERY LARGE PATTERNS
• AVOIDING EXCESSIVE STACK USAGE
• LIMITING PCRE2 RESOURCE USAGE
• CREATING CHARACTER TABLES AT BUILD TIME
• USING EBCDIC CODE
• PCRE2GREP OPTIONS FOR COMPRESSED FILE SUPPORT
• PCRE2GREP BUFFER SIZE
• PCRE2TEST OPTION FOR LIBREADLINE SUPPORT
• DEBUGGING WITH VALGRIND SUPPORT
• CODE COVERAGE REPORTING
• SEE ALSO
• AUTHOR
• REVISION

PCRE2 is distributed with a configure script that can be used to build the library in Unix-like environments using the applications known as Autotools. Also in the distribution are files to support building using CMake instead of configure. The text file README contains general information about building with Autotools (some of which is repeated below), and also has some comments about building on various operating systems. There is a lot more information about building PCRE2 without using Autotools (including information about using CMake and building "by hand") in the text file called NON-AUTOTOOLS-BUILD. You should consult this file as well as the README file if you are building in a non-Unix-like environment.

The rest of this document describes the optional features of PCRE2 that can be selected when the library is compiled. It assumes use of the configure script, where the optional features are selected or deselected by providing options to configure before running the make command. However, the same options can be selected in both Unix-like and non-Unix-like environments if you are using CMake instead of configure to build PCRE2.

If you are not using Autotools or CMake, option selection can be done by editing the config.h file, or by passing parameter settings to the compiler, as described in NON-AUTOTOOLS-BUILD.

The complete list of options for configure (which includes the standard ones such as the selection of the installation directory) can be obtained by running

  ./configure --help

By default, a library called libpcre2-8 is built, containing functions that take string arguments contained in vectors of bytes, interpreted either as single-byte characters, or UTF-8 strings. You can also build two other libraries, called libpcre2-16 and libpcre2-32, which process strings that are contained in vectors of 16-bit and 32-bit code units, respectively. These can be interpreted either as single-unit characters or UTF-16/UTF-32 strings. To build these additional libraries, add one or both of the following to the configure command:

  --enable-pcre16
  --enable-pcre32

  --disable-pcre8

The Autotools PCRE2 building process uses libtool to build both shared and static libraries by default. You can suppress one of these by adding one of

  --disable-shared
  --disable-static

By default, PCRE2 is built with support for Unicode and UTF character strings. To build it without Unicode support, add

  --disable-unicode

Of itself, Unicode support does not make PCRE2 treat strings as UTF-8, UTF-16 or UTF-32. To do that you have have to set the PCRE2_UTF option when you call pcre2_compile() to compile a pattern.

It is not possible to support both EBCDIC and UTF-8 codes in the same version of the library. Consequently, --enable-unicode and --enable-ebcdic are mutually exclusive.

UTF support allows the libraries to process character codepoints up to 0x10ffff in the strings that they handle. It also provides support for accessing the properties of such characters, using pattern escapes such as \P, \p, and \X. Only the general category properties such as Lu and Nd are supported. Details are given in the pcre2pattern documentation.

Just-in-time compiler support is included in the build by specifying

  --enable-jit

  --disable-pcre2grep-jit

By default, PCRE2 interprets the linefeed (LF) character as indicating the end of a line. This is the normal newline character on Unix-like systems. You can compile PCRE2 to use carriage return (CR) instead, by adding

  --enable-newline-is-cr

  --enable-newline-is-crlf

  --enable-newline-is-anycrlf

  --enable-newline-is-any

Whatever line ending convention is selected when PCRE2 is built can be overridden when the library functions are called. At build time it is conventional to use the standard for your operating system.

By default, the sequence \R in a pattern matches any Unicode newline sequence, whatever has been selected as the line ending sequence. If you specify

  --enable-bsr-anycrlf

Within a compiled pattern, offset values are used to point from one part to another (for example, from an opening parenthesis to an alternation metacharacter). By default, in the 8-bit and 16-bit libraries, two-byte values are used for these offsets, leading to a maximum size for a compiled pattern of around 64K. This is sufficient to handle all but the most gigantic patterns. Nevertheless, some people do want to process truly enormous patterns, so it is possible to compile PCRE2 to use three-byte or four-byte offsets by adding a setting such as

  --with-link-size=3

When matching with the pcre2_match() function, PCRE2 implements backtracking by making recursive calls to an internal function called match(). In environments where the size of the stack is limited, this can severely limit PCRE2's operation. (The Unix environment does not usually suffer from this problem, but it may sometimes be necessary to increase the maximum stack size. There is a discussion in the pcre2stack documentation.) An alternative approach to recursion that uses memory from the heap to remember data, instead of using recursive function calls, has been implemented to work round the problem of limited stack size. If you want to build a version of PCRE2 that works this way, add

  --disable-stack-for-recursion

Internally, PCRE2 has a function called match(), which it calls repeatedly (sometimes recursively) when matching a pattern with the pcre2_match() function. By controlling the maximum number of times this function may be called during a single matching operation, a limit can be placed on the resources used by a single call to pcre2_match(). The limit can be changed at run time, as described in the pcre2api documentation. The default is 10 million, but this can be changed by adding a setting such as

  --with-match-limit=500000

In some environments it is desirable to limit the depth of recursive calls of match() more strictly than the total number of calls, in order to restrict the maximum amount of stack (or heap, if --disable-stack-for-recursion is specified) that is used. A second limit controls this; it defaults to the value that is set for --with-match-limit, which imposes no additional constraints. However, you can set a lower limit by adding, for example,

  --with-match-limit-recursion=10000

PCRE2 uses fixed tables for processing characters whose code points are less than 256. By default, PCRE2 is built with a set of tables that are distributed in the file src/pcre2_chartables.c.dist. These tables are for ASCII codes only. If you add

  --enable-rebuild-chartables

PCRE2 assumes by default that it will run in an environment where the character code is ASCII (or Unicode, which is a superset of ASCII). This is the case for most computer operating systems. PCRE2 can, however, be compiled to run in an EBCDIC environment by adding

  --enable-ebcdic --disable-unicode

The EBCDIC character that corresponds to an ASCII LF is assumed to have the value 0x15 by default. However, in some EBCDIC environments, 0x25 is used. In such an environment you should use

  --enable-ebcdic-nl25

The options that select newline behaviour, such as --enable-newline-is-cr, and equivalent run-time options, refer to these character values in an EBCDIC environment.

By default, pcre2grep reads all files as plain text. You can build it so that it recognizes files whose names end in .gz or .bz2, and reads them with libz or libbz2, respectively, by adding one or both of

  --enable-pcre2grep-libz
  --enable-pcre2grep-libbz2

pcre2grep uses an internal buffer to hold a "window" on the file it is scanning, in order to be able to output "before" and "after" lines when it finds a match. The size of the buffer is controlled by a parameter whose default value is 20K. The buffer itself is three times this size, but because of the way it is used for holding "before" lines, the longest line that is guaranteed to be processable is the parameter size. You can change the default parameter value by adding, for example,

  --with-pcre2grep-bufsize=50K

If you add one of

  --enable-pcre2test-libreadline
  --enable-pcre2test-libedit

Setting this option causes the -lreadline option to be added to the pcre2test build. In many operating environments with a sytem-installed readline library this is sufficient. However, in some environments (e.g. if an unmodified distribution version of readline is in use), some extra configuration may be necessary. The INSTALL file for libreadline says this:

  "Readline uses the termcap functions, but does not link with
  the termcap or curses library itself, allowing applications
  which link with readline the to choose an appropriate library."

  LIBS="-ncurses"

By adding the

  --enable-valgrind

If your C compiler is gcc, you can build a version of PCRE2 that can generate a code coverage report for its test suite. To enable this, you must install lcov version 1.6 or above. Then specify

  --enable-coverage

Note that using ccache (a caching C compiler) is incompatible with code coverage reporting. If you have configured ccache to run automatically on your system, you must set the environment variable

  CCACHE_DISABLE=1

When --enable-coverage is used, the following addition targets are added to the Makefile:

  make coverage

  make coverage-reset

  make coverage-baseline

  make coverage-report

  make coverage-clean-report

  make coverage-clean-data

  make coverage-clean

pcre2api(3), pcre2-config(3).

Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.

Last updated: 03 November 2014
Copyright © 1997-2014 University of Cambridge.

Return to the PCRE2 index page.