pcre2syntax man page

Return to the PCRE2 index page.

This page is part of the PCRE2 HTML documentation. It was generated automatically from the original man page. If there is any nonsense in it, please consult the man page, in case the conversion went wrong.


PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY

The full syntax and semantics of the regular expressions that are supported by PCRE2 are described in the pcre2pattern documentation. This document contains a quick-reference summary of the syntax.


QUOTING

  \x         where x is non-alphanumeric is a literal x
  \Q...\E    treat enclosed characters as literal


ESCAPED CHARACTERS

This table applies to ASCII and Unicode environments. 

  \a         alarm, that is, the BEL character (hex 07)
  \cx        "control-x", where x is any ASCII printing character
  \e         escape (hex 1B)
  \f         form feed (hex 0C)
  \n         newline (hex 0A)
  \r         carriage return (hex 0D)
  \t         tab (hex 09)
  \0dd       character with octal code 0dd
  \ddd       character with octal code ddd, or backreference
  \o{ddd..}  character with octal code ddd..
  \U         "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
  \N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
  \uhhhh     character with hex code hhhh (if PCRE2_ALT_BSUX is set)
  \xhh       character with hex code hh
  \x{hh..}   character with hex code hh..
Note that \0dd is always an octal code. The treatment of backslash followed by a non-zero digit is complicated; for details see the section "Non-printing characters" in the pcre2pattern documentation, where details of escape processing in EBCDIC environments are also given. \N{U+hh..} is synonymous with \x{hh..} in PCRE2 but is not supported in EBCDIC environments. Note that \N not followed by an opening curly bracket has a different meaning (see below).

When \x is not followed by {, from zero to two hexadecimal digits are read, but if PCRE2_ALT_BSUX is set, \x must be followed by two hexadecimal digits to be recognized as a hexadecimal escape; otherwise it matches a literal "x". Likewise, if \u (in ALT_BSUX mode) is not followed by four hexadecimal digits, it matches a literal "u".


CHARACTER TYPES

  .          any character except newline;
               in dotall mode, any character whatsoever
  \C         one code unit, even in UTF mode (best avoided)
  \d         a decimal digit
  \D         a character that is not a decimal digit
  \h         a horizontal white space character
  \H         a character that is not a horizontal white space character
  \N         a character that is not a newline
  \p{xx}     a character with the xx property
  \P{xx}     a character without the xx property
  \R         a newline sequence
  \s         a white space character
  \S         a character that is not a white space character
  \v         a vertical white space character
  \V         a character that is not a vertical white space character
  \w         a "word" character
  \W         a "non-word" character
  \X         a Unicode extended grapheme cluster
\C is dangerous because it may leave the current matching point in the middle of a UTF-8 or UTF-16 character. The application can lock out the use of \C by setting the PCRE2_NEVER_BACKSLASH_C option. It is also possible to build PCRE2 with the use of \C permanently disabled.

By default, \d, \s, and \w match only ASCII characters, even in UTF-8 mode or in the 16-bit and 32-bit libraries. However, if locale-specific matching is happening, \s and \w may also match characters with code points in the range 128-255. If the PCRE2_UCP option is set, the behaviour of these escape sequences is changed to use Unicode properties and they match many more characters.


GENERAL CATEGORY PROPERTIES FOR \p and \P

  C          Other
  Cc         Control
  Cf         Format
  Cn         Unassigned
  Co         Private use
  Cs         Surrogate

  L          Letter
  Ll         Lower case letter
  Lm         Modifier letter
  Lo         Other letter
  Lt         Title case letter
  Lu         Upper case letter
  L&         Ll, Lu, or Lt

  M          Mark
  Mc         Spacing mark
  Me         Enclosing mark
  Mn         Non-spacing mark

  N          Number
  Nd         Decimal number
  Nl         Letter number
  No         Other number

  P          Punctuation
  Pc         Connector punctuation
  Pd         Dash punctuation
  Pe         Close punctuation
  Pf         Final punctuation
  Pi         Initial punctuation
  Po         Other punctuation
  Ps         Open punctuation

  S          Symbol
  Sc         Currency symbol
  Sk         Modifier symbol
  Sm         Mathematical symbol
  So         Other symbol

  Z          Separator
  Zl         Line separator
  Zp         Paragraph separator
  Zs         Space separator


PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P

  Xan        Alphanumeric: union of properties L and N
  Xps        POSIX space: property Z or tab, NL, VT, FF, CR
  Xsp        Perl space: property Z or tab, NL, VT, FF, CR
  Xuc        Univerally-named character: one that can be
               represented by a Universal Character Name
  Xwd        Perl word: property Xan or underscore
Perl and POSIX space are now the same. Perl added VT to its space character set at release 5.18.


SCRIPT NAMES FOR \p AND \P

Adlam, Ahom, Anatolian_Hieroglyphs, Arabic, Armenian, Avestan, Balinese, Bamum, Bassa_Vah, Batak, Bengali, Bhaiksuki, Bopomofo, Brahmi, Braille, Buginese, Buhid, Canadian_Aboriginal, Carian, Caucasian_Albanian, Chakma, Cham, Cherokee, Common, Coptic, Cuneiform, Cypriot, Cyrillic, Deseret, Devanagari, Dogra, Duployan, Egyptian_Hieroglyphs, Elbasan, Ethiopic, Georgian, Glagolitic, Gothic, Grantha, Greek, Gujarati, Gunjala_Gondi, Gurmukhi, Han, Hangul, Hanifi_Rohingya, Hanunoo, Hatran, Hebrew, Hiragana, Imperial_Aramaic, Inherited, Inscriptional_Pahlavi, Inscriptional_Parthian, Javanese, Kaithi, Kannada, Katakana, Kayah_Li, Kharoshthi, Khmer, Khojki, Khudawadi, Lao, Latin, Lepcha, Limbu, Linear_A, Linear_B, Lisu, Lycian, Lydian, Mahajani, Makasar, Malayalam, Mandaic, Manichaean, Marchen, Masaram_Gondi, Medefaidrin, Meetei_Mayek, Mende_Kikakui, Meroitic_Cursive, Meroitic_Hieroglyphs, Miao, Modi, Mongolian, Mro, Multani, Myanmar, Nabataean, New_Tai_Lue, Newa, Nko, Nushu, Ogham, Ol_Chiki, Old_Hungarian, Old_Italic, Old_North_Arabian, Old_Permic, Old_Persian, Old_Sogdian, Old_South_Arabian, Old_Turkic, Oriya, Osage, Osmanya, Pahawh_Hmong, Palmyrene, Pau_Cin_Hau, Phags_Pa, Phoenician, Psalter_Pahlavi, Rejang, Runic, Samaritan, Saurashtra, Sharada, Shavian, Siddham, SignWriting, Sinhala, Sogdian, Sora_Sompeng, Soyombo, Sundanese, Syloti_Nagri, Syriac, Tagalog, Tagbanwa, Tai_Le, Tai_Tham, Tai_Viet, Takri, Tamil, Tangut, Telugu, Thaana, Thai, Tibetan, Tifinagh, Tirhuta, Ugaritic, Vai, Warang_Citi, Yi, Zanabazar_Square.


CHARACTER CLASSES

  [...]       positive character class
  [^...]      negative character class
  [x-y]       range (can be used for hex characters)
  [[:xxx:]]   positive POSIX named set
  [[:^xxx:]]  negative POSIX named set

  alnum       alphanumeric
  alpha       alphabetic
  ascii       0-127
  blank       space or tab
  cntrl       control character
  digit       decimal digit
  graph       printing, excluding space
  lower       lower case letter
  print       printing, including space
  punct       printing, excluding alphanumeric
  space       white space
  upper       upper case letter
  word        same as \w
  xdigit      hexadecimal digit
In PCRE2, POSIX character set names recognize only ASCII characters by default, but some of them use Unicode properties if PCRE2_UCP is set. You can use \Q...\E inside a character class.


QUANTIFIERS

  ?           0 or 1, greedy
  ?+          0 or 1, possessive
  ??          0 or 1, lazy
  *           0 or more, greedy
  *+          0 or more, possessive
  *?          0 or more, lazy
  +           1 or more, greedy
  ++          1 or more, possessive
  +?          1 or more, lazy
  {n}         exactly n
  {n,m}       at least n, no more than m, greedy
  {n,m}+      at least n, no more than m, possessive
  {n,m}?      at least n, no more than m, lazy
  {n,}        n or more, greedy
  {n,}+       n or more, possessive
  {n,}?       n or more, lazy


ANCHORS AND SIMPLE ASSERTIONS

  \b          word boundary
  \B          not a word boundary
  ^           start of subject
                also after an internal newline in multiline mode
                (after any newline if PCRE2_ALT_CIRCUMFLEX is set)
  \A          start of subject
  $           end of subject
                also before newline at end of subject
                also before internal newline in multiline mode
  \Z          end of subject
                also before newline at end of subject
  \z          end of subject
  \G          first matching position in subject


REPORTED MATCH POINT SETTING

  \K          set reported start of match
\K is honoured in positive assertions, but ignored in negative ones.


ALTERNATION

  expr|expr|expr...


CAPTURING

  (...)           capture group
  (?<name>...)    named capture group (Perl)
  (?'name'...)    named capture group (Perl)
  (?P<name>...)   named capture group (Python)
  (?:...)         non-capture group
  (?|...)         non-capture group; reset group numbers for
                   capture groups in each alternative
In non-UTF modes, names may contain underscores and ASCII letters and digits; in UTF modes, any Unicode letters and Unicode decimal digits are permitted. In both cases, a name must not start with a digit.


ATOMIC GROUPS

  (?>...)         atomic non-capture group
  (*atomic:...)   atomic non-capture group


COMMENT

  (?#....)        comment (not nestable)


OPTION SETTING

Changes of these options within a group are automatically cancelled at the end of the group. 

  (?i)            caseless
  (?J)            allow duplicate names
  (?m)            multiline
  (?n)            no auto capture
  (?s)            single line (dotall)
  (?U)            default ungreedy (lazy)
  (?x)            extended: ignore white space except in classes
  (?xx)           as (?x) but also ignore space and tab in classes
  (?-...)         unset option(s)
  (?^)            unset imnsx options
Unsetting x or xx unsets both. Several options may be set at once, and a mixture of setting and unsetting such as (?i-x) is allowed, but there may be only one hyphen. Setting (but no unsetting) is allowed after (?^ for example (?^in). An option setting may appear at the start of a non-capture group, for example (?i:...).

The following are recognized only at the very start of a pattern or after one of the newline or \R options with similar syntax. More than one of them may appear. For the first three, d is a decimal number. 

  (*LIMIT_DEPTH=d) set the backtracking limit to d
  (*LIMIT_HEAP=d)  set the heap size limit to d * 1024 bytes
  (*LIMIT_MATCH=d) set the match limit to d
  (*NOTEMPTY)      set PCRE2_NOTEMPTY when matching
  (*NOTEMPTY_ATSTART) set PCRE2_NOTEMPTY_ATSTART when matching
  (*NO_AUTO_POSSESS) no auto-possessification (PCRE2_NO_AUTO_POSSESS)
  (*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR)
  (*NO_JIT)       disable JIT optimization
  (*NO_START_OPT) no start-match optimization (PCRE2_NO_START_OPTIMIZE)
  (*UTF)          set appropriate UTF mode for the library in use
  (*UCP)          set PCRE2_UCP (use Unicode properties for \d etc)
Note that LIMIT_DEPTH, LIMIT_HEAP, and LIMIT_MATCH can only reduce the value of the limits set by the caller of pcre2_match() or pcre2_dfa_match(), not increase them. LIMIT_RECURSION is an obsolete synonym for LIMIT_DEPTH. The application can lock out the use of (*UTF) and (*UCP) by setting the PCRE2_NEVER_UTF or PCRE2_NEVER_UCP options, respectively, at compile time.


NEWLINE CONVENTION

These are recognized only at the very start of the pattern or after option settings with a similar syntax. 

  (*CR)           carriage return only
  (*LF)           linefeed only
  (*CRLF)         carriage return followed by linefeed
  (*ANYCRLF)      all three of the above
  (*ANY)          any Unicode newline sequence
  (*NUL)          the NUL character (binary zero)


WHAT \R MATCHES

These are recognized only at the very start of the pattern or after option setting with a similar syntax. 

  (*BSR_ANYCRLF)  CR, LF, or CRLF
  (*BSR_UNICODE)  any Unicode newline sequence


LOOKAHEAD AND LOOKBEHIND ASSERTIONS

  (?=...)                     )
  (*pla:...)                  ) positive lookahead
  (*positive_lookahead:...)   )

  (?!...)                     )
  (*nla:...)                  ) negative lookahead
  (*negative_lookahead:...)   )

  (?<=...)                    )
  (*plb:...)                  ) positive lookbehind
  (*positive_lookbehind:...)  )

  (?<!...)                    )
  (*nlb:...)                  ) negative lookbehind
  (*negative_lookbehind:...)  )
Each top-level branch of a lookbehind must be of a fixed length.


SCRIPT RUNS

  (*script_run:...)           ) script run, can be backtracked into
  (*sr:...)                   )

  (*atomic_script_run:...)    ) atomic script run
  (*asr:...)                  )


BACKREFERENCES

  \n              reference by number (can be ambiguous)
  \gn             reference by number
  \g{n}           reference by number
  \g+n            relative reference by number (PCRE2 extension)
  \g-n            relative reference by number
  \g{+n}          relative reference by number (PCRE2 extension)
  \g{-n}          relative reference by number
  \k<name>        reference by name (Perl)
  \k'name'        reference by name (Perl)
  \g{name}        reference by name (Perl)
  \k{name}        reference by name (.NET)
  (?P=name)       reference by name (Python)


SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)

  (?R)            recurse whole pattern
  (?n)            call subroutine by absolute number
  (?+n)           call subroutine by relative number
  (?-n)           call subroutine by relative number
  (?&name)        call subroutine by name (Perl)
  (?P>name)       call subroutine by name (Python)
  \g<name>        call subroutine by name (Oniguruma)
  \g'name'        call subroutine by name (Oniguruma)
  \g<n>           call subroutine by absolute number (Oniguruma)
  \g'n'           call subroutine by absolute number (Oniguruma)
  \g<+n>          call subroutine by relative number (PCRE2 extension)
  \g'+n'          call subroutine by relative number (PCRE2 extension)
  \g<-n>          call subroutine by relative number (PCRE2 extension)
  \g'-n'          call subroutine by relative number (PCRE2 extension)


CONDITIONAL PATTERNS

  (?(condition)yes-pattern)
  (?(condition)yes-pattern|no-pattern)

  (?(n)               absolute reference condition
  (?(+n)              relative reference condition
  (?(-n)              relative reference condition
  (?(<name>)          named reference condition (Perl)
  (?('name')          named reference condition (Perl)
  (?(name)            named reference condition (PCRE2, deprecated)
  (?(R)               overall recursion condition
  (?(Rn)              specific numbered group recursion condition
  (?(R&name)          specific named group recursion condition
  (?(DEFINE)          define groups for reference
  (?(VERSION[>]=n.m)  test PCRE2 version
  (?(assert)          assertion condition
Note the ambiguity of (?(R) and (?(Rn) which might be named reference conditions or recursion tests. Such a condition is interpreted as a reference condition if the relevant named group exists.


BACKTRACKING CONTROL

All backtracking control verbs may be in the form (*VERB:NAME). For (*MARK) the name is mandatory, for the others it is optional. (*SKIP) changes its behaviour if :NAME is present. The others just set a name for passing back to the caller, but this is not a name that (*SKIP) can see. The following act immediately they are reached: 

  (*ACCEPT)       force successful match
  (*FAIL)         force backtrack; synonym (*F)
  (*MARK:NAME)    set name to be passed back; synonym (*:NAME)
The following act only when a subsequent match failure causes a backtrack to reach them. They all force a match failure, but they differ in what happens afterwards. Those that advance the start-of-match point do so only if the pattern is not anchored. 
  (*COMMIT)       overall failure, no advance of starting point
  (*PRUNE)        advance to next starting character
  (*SKIP)         advance to current matching position
  (*SKIP:NAME)    advance to position corresponding to an earlier
                  (*MARK:NAME); if not found, the (*SKIP) is ignored
  (*THEN)         local failure, backtrack to next alternation
The effect of one of these verbs in a group called as a subroutine is confined to the subroutine call.


CALLOUTS

  (?C)            callout (assumed number 0)
  (?Cn)           callout with numerical data n
  (?C"text")      callout with string data
The allowed string delimiters are ` ' " ^ % # $ (which are the same for the start and the end), and the starting delimiter { matched with the ending delimiter }. To encode the ending delimiter within the string, double it.


SEE ALSO

pcre2pattern(3), pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2(3).


AUTHOR

Philip Hazel
University Computing Service
Cambridge, England.


REVISION

Last updated: 03 February 2019
Copyright © 1997-2019 University of Cambridge.

Return to the PCRE2 index page.