walkero
/
pcre2
1
0
Fork 0
Code Issues Pull Requests Projects Releases 1 Wiki Activity
pcre2/doc/pcre2grep.txt

945 lines
53 KiB
Plaintext
Raw Blame History

PCRE2GREP(1) General Commands Manual PCRE2GREP(1)
NAME
pcre2grep - a grep with Perl-compatible regular expressions.
SYNOPSIS
pcre2grep [options] [long options] [pattern] [path1 path2 ...]
DESCRIPTION
pcre2grep searches files for character patterns, in the same way as
other grep commands do, but it uses the PCRE2 regular expression
library to support patterns that are compatible with the regular
expressions of Perl 5. See pcre2syntax(3) for a quick-reference summary
of pattern syntax, or pcre2pattern(3) for a full description of the
syntax and semantics of the regular expressions that PCRE2 supports.
Patterns, whether supplied on the command line or in a separate file,
are given without delimiters. For example:
pcre2grep Thursday /etc/motd
If you attempt to use delimiters (for example, by surrounding a pattern
with slashes, as is common in Perl scripts), they are interpreted as
part of the pattern. Quotes can of course be used to delimit patterns
on the command line because they are interpreted by the shell, and
indeed quotes are required if a pattern contains white space or shell
metacharacters.
The first argument that follows any option settings is treated as the
single pattern to be matched when neither -e nor -f is present. Con-
versely, when one or both of these options are used to specify pat-
terns, all arguments are treated as path names. At least one of -e, -f,
or an argument pattern must be provided.
If no files are specified, pcre2grep reads the standard input. The
standard input can also be referenced by a name consisting of a single
hyphen. For example:
pcre2grep some-pattern file1 - file3
Input files are searched line by line. By default, each line that
matches a pattern is copied to the standard output, and if there is
more than one file, the file name is output at the start of each line,
followed by a colon. However, there are options that can change how
pcre2grep behaves. In particular, the -M option makes it possible to
search for strings that span line boundaries. What defines a line
boundary is controlled by the -N (--newline) option.
The amount of memory used for buffering files that are being scanned is
controlled by parameters that can be set by the --buffer-size and
--max-buffer-size options. The first of these sets the size of buffer
that is obtained at the start of processing. If an input file contains
very long lines, a larger buffer may be needed; this is handled by
automatically extending the buffer, up to the limit specified by --max-
buffer-size. The default values for these parameters are specified when
pcre2grep is built, with the default defaults being 20K and 1M respec-
tively. An error occurs if a line is too long and the buffer can no
longer be expanded.
The block of memory that is actually used is three times the "buffer
size", to allow for buffering "before" and "after" lines. If the buffer
size is too small, fewer than requested "before" and "after" lines may
be output.
Patterns can be no longer than 8K or BUFSIZ bytes, whichever is the
greater. BUFSIZ is defined in <stdio.h>. When there is more than one
pattern (specified by the use of -e and/or -f), each pattern is applied
to each line in the order in which they are defined, except that all
the -e patterns are tried before the -f patterns.
By default, as soon as one pattern matches a line, no further patterns
are considered. However, if --colour (or --color) is used to colour the
matching substrings, or if --only-matching, --file-offsets, or --line-
offsets is used to output only the part of the line that matched
(either shown literally, or as an offset), scanning resumes immediately
following the match, so that further matches on the same line can be
found. If there are multiple patterns, they are all tried on the
remainder of the line, but patterns that follow the one that matched
are not tried on the earlier part of the line.
This behaviour means that the order in which multiple patterns are
specified can affect the output when one of the above options is used.
This is no longer the same behaviour as GNU grep, which now manages to
display earlier matches for later patterns (as long as there is no
overlap).
Patterns that can match an empty string are accepted, but empty string
matches are never recognized. An example is the pattern
"(super)?(man)?", in which all components are optional. This pattern
finds all occurrences of both "super" and "man"; the output differs
from matching with "super|man" when only the matching substrings are
being shown.
If the LC_ALL or LC_CTYPE environment variable is set, pcre2grep uses
the value to set a locale when calling the PCRE2 library. The --locale
option can be used to override this.
SUPPORT FOR COMPRESSED FILES
It is possible to compile pcre2grep so that it uses libz or libbz2 to
read compressed files whose names end in .gz or .bz2, respectively. You
can find out whether your pcre2grep binary has support for one or both
of these file types by running it with the --help option. If the appro-
priate support is not present, all files are treated as plain text. The
standard input is always so treated. When input is from a compressed
.gz or .bz2 file, the --line-buffered option is ignored.
BINARY FILES
By default, a file that contains a binary zero byte within the first
1024 bytes is identified as a binary file, and is processed specially.
(GNU grep identifies binary files in this manner.) However, if the new-
line type is specified as "nul", that is, the line terminator is a
binary zero, the test for a binary file is not applied. See the
--binary-files option for a means of changing the way binary files are
handled.
BINARY ZEROS IN PATTERNS
Patterns passed from the command line are strings that are terminated
by a binary zero, so cannot contain internal zeros. However, patterns
that are read from a file via the -f option may contain binary zeros.
OPTIONS
The order in which some of the options appear can affect the output.
For example, both the -H and -l options affect the printing of file
names. Whichever comes later in the command line will be the one that
takes effect. Similarly, except where noted below, if an option is
given twice, the later setting is used. Numerical values for options
may be followed by K or M, to signify multiplication by 1024 or
1024*1024 respectively.
-- This terminates the list of options. It is useful if the next
item on the command line starts with a hyphen but is not an
option. This allows for the processing of patterns and file
names that start with hyphens.
-A number, --after-context=number
Output up to number lines of context after each matching
line. Fewer lines are output if the next match or the end of
the file is reached, or if the processing buffer size has
been set too small. If file names and/or line numbers are
being output, a hyphen separator is used instead of a colon
for the context lines. A line containing "--" is output
between each group of lines, unless they are in fact contigu-
ous in the input file. The value of number is expected to be
relatively small. When -c is used, -A is ignored.
-a, --text
Treat binary files as text. This is equivalent to --binary-
files=text.
-B number, --before-context=number
Output up to number lines of context before each matching
line. Fewer lines are output if the previous match or the
start of the file is within number lines, or if the process-
ing buffer size has been set too small. If file names and/or
line numbers are being output, a hyphen separator is used
instead of a colon for the context lines. A line containing
"--" is output between each group of lines, unless they are
in fact contiguous in the input file. The value of number is
expected to be relatively small. When -c is used, -B is
ignored.
--binary-files=word
Specify how binary files are to be processed. If the word is
"binary" (the default), pattern matching is performed on
binary files, but the only output is "Binary file <name>
matches" when a match succeeds. If the word is "text", which
is equivalent to the -a or --text option, binary files are
processed in the same way as any other file. In this case,
when a match succeeds, the output may be binary garbage,
which can have nasty effects if sent to a terminal. If the
word is "without-match", which is equivalent to the -I
option, binary files are not processed at all; they are
assumed not to be of interest and are skipped without causing
any output or affecting the return code.
--buffer-size=number
Set the parameter that controls how much memory is obtained
at the start of processing for buffering files that are being
scanned. See also --max-buffer-size below.
-C number, --context=number
Output number lines of context both before and after each
matching line. This is equivalent to setting both -A and -B
to the same value.
-c, --count
Do not output lines from the files that are being scanned;
instead output the number of lines that would have been
shown, either because they matched, or, if -v is set, because
they failed to match. By default, this count is exactly the
same as the number of lines that would have been output, but
if the -M (multiline) option is used (without -v), there may
be more suppressed lines than the count (that is, the number
of matches).
If no lines are selected, the number zero is output. If sev-
eral files are are being scanned, a count is output for each
of them and the -t option can be used to cause a total to be
output at the end. However, if the --files-with-matches
option is also used, only those files whose counts are
greater than zero are listed. When -c is used, the -A, -B,
and -C options are ignored.
--colour, --color
If this option is given without any data, it is equivalent to
"--colour=auto". If data is required, it must be given in
the same shell item, separated by an equals sign.
--colour=value, --color=value
This option specifies under what circumstances the parts of a
line that matched a pattern should be coloured in the output.
By default, the output is not coloured. The value (which is
optional, see above) may be "never", "always", or "auto". In
the latter case, colouring happens only if the standard out-
put is connected to a terminal. More resources are used when
colouring is enabled, because pcre2grep has to search for all
possible matches in a line, not just one, in order to colour
them all.
The colour that is used can be specified by setting one of
the environment variables PCRE2GREP_COLOUR, PCRE2GREP_COLOR,
PCREGREP_COLOUR, or PCREGREP_COLOR, which are checked in that
order. If none of these are set, pcre2grep looks for
GREP_COLORS or GREP_COLOR (in that order). The value of the
variable should be a string of two numbers, separated by a
semicolon, except in the case of GREP_COLORS, which must
start with "ms=" or "mt=" followed by two semicolon-separated
colours, terminated by the end of the string or by a colon.
If GREP_COLORS does not start with "ms=" or "mt=" it is
ignored, and GREP_COLOR is checked.
If the string obtained from one of the above variables con-
tains any characters other than semicolon or digits, the set-
ting is ignored and the default colour is used. The string is
copied directly into the control string for setting colour on
a terminal, so it is your responsibility to ensure that the
values make sense. If no relevant environment variable is
set, the default is "1;31", which gives red.
-D action, --devices=action
If an input path is not a regular file or a directory,
"action" specifies how it is to be processed. Valid values
are "read" (the default) or "skip" (silently skip the path).
-d action, --directories=action
If an input path is a directory, "action" specifies how it is
to be processed. Valid values are "read" (the default in
non-Windows environments, for compatibility with GNU grep),
"recurse" (equivalent to the -r option), or "skip" (silently
skip the path, the default in Windows environments). In the
"read" case, directories are read as if they were ordinary
files. In some operating systems the effect of reading a
directory like this is an immediate end-of-file; in others it
may provoke an error.
--depth-limit=number
See --match-limit below.
-e pattern, --regex=pattern, --regexp=pattern
Specify a pattern to be matched. This option can be used mul-
tiple times in order to specify several patterns. It can also
be used as a way of specifying a single pattern that starts
with a hyphen. When -e is used, no argument pattern is taken
from the command line; all arguments are treated as file
names. There is no limit to the number of patterns. They are
applied to each line in the order in which they are defined
until one matches.
If -f is used with -e, the command line patterns are matched
first, followed by the patterns from the file(s), independent
of the order in which these options are specified. Note that
multiple use of -e is not the same as a single pattern with
alternatives. For example, X|Y finds the first character in a
line that is X or Y, whereas if the two patterns are given
separately, with X first, pcre2grep finds X if it is present,
even if it follows Y in the line. It finds Y only if there is
no X in the line. This matters only if you are using -o or
--colo(u)r to show the part(s) of the line that matched.
--exclude=pattern
Files (but not directories) whose names match the pattern are
skipped without being processed. This applies to all files,
whether listed on the command line, obtained from --file-
list, or by scanning a directory. The pattern is a PCRE2 reg-
ular expression, and is matched against the final component
of the file name, not the entire path. The -F, -w, and -x
options do not apply to this pattern. The option may be given
any number of times in order to specify multiple patterns. If
a file name matches both an --include and an --exclude pat-
tern, it is excluded. There is no short form for this option.
--exclude-from=filename
Treat each non-empty line of the file as the data for an
--exclude option. What constitutes a newline when reading the
file is the operating system's default. The --newline option
has no effect on this option. This option may be given more
than once in order to specify a number of files to read.
--exclude-dir=pattern
Directories whose names match the pattern are skipped without
being processed, whatever the setting of the --recursive
option. This applies to all directories, whether listed on
the command line, obtained from --file-list, or by scanning a
parent directory. The pattern is a PCRE2 regular expression,
and is matched against the final component of the directory
name, not the entire path. The -F, -w, and -x options do not
apply to this pattern. The option may be given any number of
times in order to specify more than one pattern. If a direc-
tory matches both --include-dir and --exclude-dir, it is
excluded. There is no short form for this option.
-F, --fixed-strings
Interpret each data-matching pattern as a list of fixed
strings, separated by newlines, instead of as a regular
expression. What constitutes a newline for this purpose is
controlled by the --newline option. The -w (match as a word)
and -x (match whole line) options can be used with -F. They
apply to each of the fixed strings. A line is selected if any
of the fixed strings are found in it (subject to -w or -x, if
present). This option applies only to the patterns that are
matched against the contents of files; it does not apply to
patterns specified by any of the --include or --exclude
options.
-f filename, --file=filename
Read patterns from the file, one per line, and match them
against each line of input. As is the case with patterns on
the command line, no delimiters should be used. What consti-
tutes a newline when reading the file is the operating sys-
tem's default interpretation of \n. The --newline option has
no effect on this option. Trailing white space is removed
from each line, and blank lines are ignored. An empty file
contains no patterns and therefore matches nothing. Patterns
read from a file in this way may contain binary zeros, which
are treated as ordinary data characters. See also the com-
ments about multiple patterns versus a single pattern with
alternatives in the description of -e above.
If this option is given more than once, all the specified
files are read. A data line is output if any of the patterns
match it. A file name can be given as "-" to refer to the
standard input. When -f is used, patterns specified on the
command line using -e may also be present; they are tested
before the file's patterns. However, no other pattern is
taken from the command line; all arguments are treated as the
names of paths to be searched.
--file-list=filename
Read a list of files and/or directories that are to be
scanned from the given file, one per line. What constitutes a
newline when reading the file is the operating system's
default. Trailing white space is removed from each line, and
blank lines are ignored. These paths are processed before any
that are listed on the command line. The file name can be
given as "-" to refer to the standard input. If --file and
--file-list are both specified as "-", patterns are read
first. This is useful only when the standard input is a ter-
minal, from which further lines (the list of files) can be
read after an end-of-file indication. If this option is given
more than once, all the specified files are read.
--file-offsets
Instead of showing lines or parts of lines that match, show
each match as an offset from the start of the file and a
length, separated by a comma. In this mode, no context is
shown. That is, the -A, -B, and -C options are ignored. If
there is more than one match in a line, each of them is shown
separately. This option is mutually exclusive with --output,
--line-offsets, and --only-matching.
-H, --with-filename
Force the inclusion of the file name at the start of output
lines when searching a single file. By default, the file name
is not shown in this case. For matching lines, the file name
is followed by a colon; for context lines, a hyphen separator
is used. If a line number is also being output, it follows
the file name. When the -M option causes a pattern to match
more than one line, only the first is preceded by the file
name. This option overrides any previous -h, -l, or -L
options.
-h, --no-filename
Suppress the output file names when searching multiple files.
By default, file names are shown when multiple files are
searched. For matching lines, the file name is followed by a
colon; for context lines, a hyphen separator is used. If a
line number is also being output, it follows the file name.
This option overrides any previous -H, -L, or -l options.
--heap-limit=number
See --match-limit below.
--help Output a help message, giving brief details of the command
options and file type support, and then exit. Anything else
on the command line is ignored.
-I Ignore binary files. This is equivalent to --binary-
files=without-match.
-i, --ignore-case
Ignore upper/lower case distinctions during comparisons.
--include=pattern
If any --include patterns are specified, the only files that
are processed are those that match one of the patterns (and
do not match an --exclude pattern). This option does not
affect directories, but it applies to all files, whether
listed on the command line, obtained from --file-list, or by
scanning a directory. The pattern is a PCRE2 regular expres-
sion, and is matched against the final component of the file
name, not the entire path. The -F, -w, and -x options do not
apply to this pattern. The option may be given any number of
times. If a file name matches both an --include and an
--exclude pattern, it is excluded. There is no short form
for this option.
--include-from=filename
Treat each non-empty line of the file as the data for an
--include option. What constitutes a newline for this purpose
is the operating system's default. The --newline option has
no effect on this option. This option may be given any number
of times; all the files are read.
--include-dir=pattern
If any --include-dir patterns are specified, the only direc-
tories that are processed are those that match one of the
patterns (and do not match an --exclude-dir pattern). This
applies to all directories, whether listed on the command
line, obtained from --file-list, or by scanning a parent
directory. The pattern is a PCRE2 regular expression, and is
matched against the final component of the directory name,
not the entire path. The -F, -w, and -x options do not apply
to this pattern. The option may be given any number of times.
If a directory matches both --include-dir and --exclude-dir,
it is excluded. There is no short form for this option.
-L, --files-without-match
Instead of outputting lines from the files, just output the
names of the files that do not contain any lines that would
have been output. Each file name is output once, on a sepa-
rate line. This option overrides any previous -H, -h, or -l
options.
-l, --files-with-matches
Instead of outputting lines from the files, just output the
names of the files containing lines that would have been out-
put. Each file name is output once, on a separate line.
Searching normally stops as soon as a matching line is found
in a file. However, if the -c (count) option is also used,
matching continues in order to obtain the correct count, and
those files that have at least one match are listed along
with their counts. Using this option with -c is a way of sup-
pressing the listing of files with no matches. This opeion
overrides any previous -H, -h, or -L options.
--label=name
This option supplies a name to be used for the standard input
when file names are being output. If not supplied, "(standard
input)" is used. There is no short form for this option.
--line-buffered
When this option is given, non-compressed input is read and
processed line by line, and the output is flushed after each
write. By default, input is read in large chunks, unless
pcre2grep can determine that it is reading from a terminal
(which is currently possible only in Unix-like environments).
Output to terminal is normally automatically flushed by the
operating system. This option can be useful when the input or
output is attached to a pipe and you do not want pcre2grep to
buffer up large amounts of data. However, its use will affect
performance, and the -M (multiline) option ceases to work.
When input is from a compressed .gz or .bz2 file, --line-
buffered is ignored.
--line-offsets
Instead of showing lines or parts of lines that match, show
each match as a line number, the offset from the start of the
line, and a length. The line number is terminated by a colon
(as usual; see the -n option), and the offset and length are
separated by a comma. In this mode, no context is shown.
That is, the -A, -B, and -C options are ignored. If there is
more than one match in a line, each of them is shown sepa-
rately. This option is mutually exclusive with --output,
--file-offsets, and --only-matching.
--locale=locale-name
This option specifies a locale to be used for pattern match-
ing. It overrides the value in the LC_ALL or LC_CTYPE envi-
ronment variables. If no locale is specified, the PCRE2
library's default (usually the "C" locale) is used. There is
no short form for this option.
--match-limit=number
Processing some regular expression patterns may take a very
long time to search for all possible matching strings. Others
may require a very large amount of memory. There are three
options that set resource limits for matching.
The --match-limit option provides a means of limiting comput-
ing resource usage when processing patterns that are not
going to match, but which have a very large number of possi-
bilities in their search trees. The classic example is a pat-
tern that uses nested unlimited repeats. Internally, PCRE2
has a counter that is incremented each time around its main
processing loop. If the value set by --match-limit is
reached, an error occurs.
The --heap-limit option specifies, as a number of kilobytes,
the amount of heap memory that may be used for matching. Heap
memory is needed only if matching the pattern requires a sig-
nificant number of nested backtracking points to be remem-
bered. This parameter can be set to zero to forbid the use of
heap memory altogether.
The --depth-limit option limits the depth of nested back-
tracking points, which indirectly limits the amount of memory
that is used. The amount of memory needed for each backtrack-
ing point depends on the number of capturing parentheses in
the pattern, so the amount of memory that is used before this
limit acts varies from pattern to pattern. This limit is of
use only if it is set smaller than --match-limit.
There are no short forms for these options. The default set-
tings are specified when the PCRE2 library is compiled, with
the default defaults being very large and so effectively
unlimited.
--max-buffer-size=number
This limits the expansion of the processing buffer, whose
initial size can be set by --buffer-size. The maximum buffer
size is silently forced to be no smaller than the starting
buffer size.
-M, --multiline
Allow patterns to match more than one line. When this option
is set, the PCRE2 library is called in "multiline" mode. This
allows a matched string to extend past the end of a line and
continue on one or more subsequent lines. Patterns used with
-M may usefully contain literal newline characters and inter-
nal occurrences of ^ and $ characters. The output for a suc-
cessful match may consist of more than one line. The first
line is the line in which the match started, and the last
line is the line in which the match ended. If the matched
string ends with a newline sequence, the output ends at the
end of that line. If -v is set, none of the lines in a
multi-line match are output. Once a match has been handled,
scanning restarts at the beginning of the line after the one
in which the match ended.
The newline sequence that separates multiple lines must be
matched as part of the pattern. For example, to find the
phrase "regular expression" in a file where "regular" might
be at the end of a line and "expression" at the start of the
next line, you could use this command:
pcre2grep -M 'regular\s+expression' <file>
The \s escape sequence matches any white space character,
including newlines, and is followed by + so as to match
trailing white space on the first line as well as possibly
handling a two-character newline sequence.
There is a limit to the number of lines that can be matched,
imposed by the way that pcre2grep buffers the input file as
it scans it. With a sufficiently large processing buffer,
this should not be a problem, but the -M option does not work
when input is read line by line (see --line-buffered.)
-N newline-type, --newline=newline-type
The PCRE2 library supports five different conventions for
indicating the ends of lines. They are the single-character
sequences CR (carriage return) and LF (linefeed), the two-
character sequence CRLF, an "anycrlf" convention, which rec-
ognizes any of the preceding three types, and an "any" con-
vention, in which any Unicode line ending sequence is assumed
to end a line. The Unicode sequences are the three just men-
tioned, plus VT (vertical tab, U+000B), FF (form feed,
U+000C), NEL (next line, U+0085), LS (line separator,
U+2028), and PS (paragraph separator, U+2029).
When the PCRE2 library is built, a default line-ending
sequence is specified. This is normally the standard
sequence for the operating system. Unless otherwise specified
by this option, pcre2grep uses the library's default. The
possible values for this option are CR, LF, CRLF, ANYCRLF, or
ANY. This makes it possible to use pcre2grep to scan files
that have come from other environments without having to mod-
ify their line endings. If the data that is being scanned
does not agree with the convention set by this option,
pcre2grep may behave in strange ways. Note that this option
does not apply to files specified by the -f, --exclude-from,
or --include-from options, which are expected to use the
operating system's standard newline sequence.
-n, --line-number
Precede each output line by its line number in the file, fol-
lowed by a colon for matching lines or a hyphen for context
lines. If the file name is also being output, it precedes the
line number. When the -M option causes a pattern to match
more than one line, only the first is preceded by its line
number. This option is forced if --line-offsets is used.
--no-jit If the PCRE2 library is built with support for just-in-time
compiling (which speeds up matching), pcre2grep automatically
makes use of this, unless it was explicitly disabled at build
time. This option can be used to disable the use of JIT at
run time. It is provided for testing and working round prob-
lems. It should never be needed in normal use.
-O text, --output=text
When there is a match, instead of outputting the whole line
that matched, output just the given text. This option is
mutually exclusive with --only-matching, --file-offsets, and
--line-offsets. Escape sequences starting with a dollar char-
acter may be used to insert the contents of the matched part
of the line and/or captured substrings into the text.
$<digits> or ${<digits>} is replaced by the captured sub-
string of the given decimal number; zero substitutes the
whole match. If the number is greater than the number of cap-
turing substrings, or if the capture is unset, the replace-
ment is empty.
$a is replaced by bell; $b by backspace; $e by escape; $f by
form feed; $n by newline; $r by carriage return; $t by tab;
$v by vertical tab.
$o<digits> is replaced by the character represented by the
given octal number; up to three digits are processed.
$x<digits> is replaced by the character represented by the
given hexadecimal number; up to two digits are processed.
Any other character is substituted by itself. In particular,
$$ is replaced by a single dollar.
-o, --only-matching
Show only the part of the line that matched a pattern instead
of the whole line. In this mode, no context is shown. That
is, the -A, -B, and -C options are ignored. If there is more
than one match in a line, each of them is shown separately,
on a separate line of output. If -o is combined with -v
(invert the sense of the match to find non-matching lines),
no output is generated, but the return code is set appropri-
ately. If the matched portion of the line is empty, nothing
is output unless the file name or line number are being
printed, in which case they are shown on an otherwise empty
line. This option is mutually exclusive with --output,
--file-offsets and --line-offsets.
-onumber, --only-matching=number
Show only the part of the line that matched the capturing
parentheses of the given number. Up to 32 capturing parenthe-
ses are supported, and -o0 is equivalent to -o without a num-
ber. Because these options can be given without an argument
(see above), if an argument is present, it must be given in
the same shell item, for example, -o3 or --only-matching=2.
The comments given for the non-argument case above also apply
to this option. If the specified capturing parentheses do not
exist in the pattern, or were not set in the match, nothing
is output unless the file name or line number are being out-
put.
If this option is given multiple times, multiple substrings
are output for each match, in the order the options are
given, and all on one line. For example, -o3 -o1 -o3 causes
the substrings matched by capturing parentheses 3 and 1 and
then 3 again to be output. By default, there is no separator
(but see the next option).
--om-separator=text
Specify a separating string for multiple occurrences of -o.
The default is an empty string. Separating strings are never
coloured.
-q, --quiet
Work quietly, that is, display nothing except error messages.
The exit status indicates whether or not any matches were
found.
-r, --recursive
If any given path is a directory, recursively scan the files
it contains, taking note of any --include and --exclude set-
tings. By default, a directory is read as a normal file; in
some operating systems this gives an immediate end-of-file.
This option is a shorthand for setting the -d option to
"recurse".
--recursion-limit=number
See --match-limit above.
-s, --no-messages
Suppress error messages about non-existent or unreadable
files. Such files are quietly skipped. However, the return
code is still 2, even if matches were found in other files.
-t, --total-count
This option is useful when scanning more than one file. If
used on its own, -t suppresses all output except for a grand
total number of matching lines (or non-matching lines if -v
is used) in all the files. If -t is used with -c, a grand
total is output except when the previous output is just one
line. In other words, it is not output when just one file's
count is listed. If file names are being output, the grand
total is preceded by "TOTAL:". Otherwise, it appears as just
another number. The -t option is ignored when used with -L
(list files without matches), because the grand total would
always be zero.
-u, --utf-8
Operate in UTF-8 mode. This option is available only if PCRE2
has been compiled with UTF-8 support. All patterns (including
those for any --exclude and --include options) and all sub-
ject lines that are scanned must be valid strings of UTF-8
characters.
-V, --version
Write the version numbers of pcre2grep and the PCRE2 library
to the standard output and then exit. Anything else on the
command line is ignored.
-v, --invert-match
Invert the sense of the match, so that lines which do not
match any of the patterns are the ones that are found.
-w, --word-regex, --word-regexp
Force the patterns only to match "words". That is, there must
be a word boundary at the start and end of each matched
string. This is equivalent to having "\b(?:" at the start of
each pattern, and ")\b" at the end. This option applies only
to the patterns that are matched against the contents of
files; it does not apply to patterns specified by any of the
--include or --exclude options.
-x, --line-regex, --line-regexp
Force the patterns to start matching only at the beginnings
of lines, and in addition, require them to match entire
lines. In multiline mode the match may be more than one line.
This is equivalent to having "^(?:" at the start of each pat-
tern and ")$" at the end. This option applies only to the
patterns that are matched against the contents of files; it
does not apply to patterns specified by any of the --include
or --exclude options.
ENVIRONMENT VARIABLES
The environment variables LC_ALL and LC_CTYPE are examined, in that
order, for a locale. The first one that is set is used. This can be
overridden by the --locale option. If no locale is set, the PCRE2
library's default (usually the "C" locale) is used.
NEWLINES
The -N (--newline) option allows pcre2grep to scan files with different
newline conventions from the default. Any parts of the input files that
are written to the standard output are copied identically, with what-
ever newline sequences they have in the input. However, the setting of
this option affects only the way scanned files are processed. It does
not affect the interpretation of files specified by the -f, --file-
list, --exclude-from, or --include-from options, nor does it affect the
way in which pcre2grep writes informational messages to the standard
error and output streams. For these it uses the string "\n" to indicate
newlines, relying on the C I/O library to convert this to an appropri-
ate sequence.
OPTIONS COMPATIBILITY
Many of the short and long forms of pcre2grep's options are the same as
in the GNU grep program. Any long option of the form --xxx-regexp (GNU
terminology) is also available as --xxx-regex (PCRE2 terminology). How-
ever, the --depth-limit, --file-list, --file-offsets, --heap-limit,
--include-dir, --line-offsets, --locale, --match-limit, -M, --multi-
line, -N, --newline, --om-separator, --output, -u, and --utf-8 options
are specific to pcre2grep, as is the use of the --only-matching option
with a capturing parentheses number.
Although most of the common options work the same way, a few are dif-
ferent in pcre2grep. For example, the --include option's argument is a
glob for GNU grep, but a regular expression for pcre2grep. If both the
-c and -l options are given, GNU grep lists only file names, without
counts, but pcre2grep gives the counts as well.
OPTIONS WITH DATA
There are four different ways in which an option with data can be spec-
ified. If a short form option is used, the data may follow immedi-
ately, or (with one exception) in the next command line item. For exam-
ple:
-f/some/file
-f /some/file
The exception is the -o option, which may appear with or without data.
Because of this, if data is present, it must follow immediately in the
same item, for example -o3.
If a long form option is used, the data may appear in the same command
line item, separated by an equals character, or (with two exceptions)
it may appear in the next command line item. For example:
--file=/some/file
--file /some/file
Note, however, that if you want to supply a file name beginning with ~
as data in a shell command, and have the shell expand ~ to a home
directory, you must separate the file name from the option, because the
shell does not treat ~ specially unless it is at the start of an item.
The exceptions to the above are the --colour (or --color) and --only-
matching options, for which the data is optional. If one of these
options does have data, it must be given in the first form, using an
equals character. Otherwise pcre2grep will assume that it has no data.
USING PCRE2'S CALLOUT FACILITY
pcre2grep has, by default, support for calling external programs or
scripts or echoing specific strings during matching by making use of
PCRE2's callout facility. However, this support can be disabled when
pcre2grep is built. You can find out whether your binary has support
for callouts by running it with the --help option. If the support is
not enabled, all callouts in patterns are ignored by pcre2grep.
A callout in a PCRE2 pattern is of the form (?C<arg>) where the argu-
ment is either a number or a quoted string (see the pcre2callout docu-
mentation for details). Numbered callouts are ignored by pcre2grep;
only callouts with string arguments are useful.
Calling external programs or scripts
If the callout string does not start with a pipe (vertical bar) charac-
ter, it is parsed into a list of substrings separated by pipe charac-
ters. The first substring must be an executable name, with the follow-
ing substrings specifying arguments:
executable_name|arg1|arg2|...
Any substring (including the executable name) may contain escape
sequences started by a dollar character: $<digits> or ${<digits>} is
replaced by the captured substring of the given decimal number, which
must be greater than zero. If the number is greater than the number of
capturing substrings, or if the capture is unset, the replacement is
empty.
Any other character is substituted by itself. In particular, $$ is
replaced by a single dollar and $| is replaced by a pipe character.
Here is an example:
echo -e "abcde\n12345" | pcre2grep \
'(?x)(.)(..(.))
(?C"/bin/echo|Arg1: [$1] [$2] [$3]|Arg2: $|${1}$| ($4)")()' -
Output:
Arg1: [a] [bcd] [d] Arg2: |a| ()
abcde
Arg1: [1] [234] [4] Arg2: |1| ()
12345
The parameters for the execv() system call that is used to run the pro-
gram or script are zero-terminated strings. This means that binary zero
characters in the callout argument will cause premature termination of
their substrings, and therefore should not be present. Any syntax
errors in the string (for example, a dollar not followed by another
character) cause the callout to be ignored. If running the program
fails for any reason (including the non-existence of the executable), a
local matching failure occurs and the matcher backtracks in the normal
way.
Echoing a specific string
If the callout string starts with a pipe (vertical bar) character, the
rest of the string is written to the output, having been passed through
the same escape processing as text from the --output option. This pro-
vides a simple echoing facility that avoids calling an external program
or script. No terminator is added to the string, so if you want a new-
line, you must include it explicitly. Matching continues normally
after the string is output. If you want to see only the callout output
but not any output from an actual match, you should end the relevant
pattern with (*FAIL).
MATCHING ERRORS
It is possible to supply a regular expression that takes a very long
time to fail to match certain lines. Such patterns normally involve
nested indefinite repeats, for example: (a+)*\d when matched against a
line of a's with no final digit. The PCRE2 matching function has a
resource limit that causes it to abort in these circumstances. If this
happens, pcre2grep outputs an error message and the line that caused
the problem to the standard error stream. If there are more than 20
such errors, pcre2grep gives up.
The --match-limit option of pcre2grep can be used to set the overall
resource limit. There are also other limits that affect the amount of
memory used during matching; see the discussion of --heap-limit and
--depth-limit above.
DIAGNOSTICS
Exit status is 0 if any matches were found, 1 if no matches were found,
and 2 for syntax errors, overlong lines, non-existent or inaccessible
files (even if matches were found in other files) or too many matching
errors. Using the -s option to suppress error messages about inaccessi-
ble files does not affect the return code.
When run under VMS, the return code is placed in the symbol
PCRE2GREP_RC because VMS does not distinguish between exit(0) and
exit(1).
SEE ALSO
pcre2pattern(3), pcre2syntax(3), pcre2callout(3).
AUTHOR
Philip Hazel
University Computing Service
Cambridge, England.
REVISION
Last updated: 24 February 2018
Copyright (c) 1997-2018 University of Cambridge.
Reference in New Issue View Git Blame Copy Permalink