diff --git a/extras/PhysFS.NET/AssemblyInfo.cs b/extras/PhysFS.NET/AssemblyInfo.cs deleted file mode 100755 index 67157c6..0000000 --- a/extras/PhysFS.NET/AssemblyInfo.cs +++ /dev/null @@ -1,58 +0,0 @@ -using System.Reflection; -using System.Runtime.CompilerServices; - -// -// General Information about an assembly is controlled through the following -// set of attributes. Change these attribute values to modify the information -// associated with an assembly. -// -[assembly: AssemblyTitle("PhysFS.NET")] -[assembly: AssemblyDescription("PhysFS Bindings for .NET")] -[assembly: AssemblyConfiguration("")] -[assembly: AssemblyCompany("")] -[assembly: AssemblyProduct("PhysFS.NET")] -[assembly: AssemblyCopyright("(c)2003 Gregory S. Read")] -[assembly: AssemblyTrademark("")] -[assembly: AssemblyCulture("")] - -// -// Version information for an assembly consists of the following four values: -// -// Major Version -// Minor Version -// Build Number -// Revision -// -// You can specify all the values or you can default the Revision and Build Numbers -// by using the '*' as shown below: - -[assembly: AssemblyVersion("1.0.*")] - -// -// In order to sign your assembly you must specify a key to use. Refer to the -// Microsoft .NET Framework documentation for more information on assembly signing. -// -// Use the attributes below to control which key is used for signing. -// -// Notes: -// (*) If no key is specified, the assembly is not signed. -// (*) KeyName refers to a key that has been installed in the Crypto Service -// Provider (CSP) on your machine. KeyFile refers to a file which contains -// a key. -// (*) If the KeyFile and the KeyName values are both specified, the -// following processing occurs: -// (1) If the KeyName can be found in the CSP, that key is used. -// (2) If the KeyName does not exist and the KeyFile does exist, the key -// in the KeyFile is installed into the CSP and used. -// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility. -// When specifying the KeyFile, the location of the KeyFile should be -// relative to the project output directory which is -// %Project Directory%\obj\. For example, if your KeyFile is -// located in the project directory, you would specify the AssemblyKeyFile -// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] -// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework -// documentation for more information on this. -// -[assembly: AssemblyDelaySign(false)] -[assembly: AssemblyKeyFile("")] -[assembly: AssemblyKeyName("")] diff --git a/extras/PhysFS.NET/PhysFS.NET.csproj b/extras/PhysFS.NET/PhysFS.NET.csproj deleted file mode 100755 index 3b827b8..0000000 --- a/extras/PhysFS.NET/PhysFS.NET.csproj +++ /dev/null @@ -1,113 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/extras/PhysFS.NET/PhysFS.NET.sln b/extras/PhysFS.NET/PhysFS.NET.sln deleted file mode 100755 index 341aa47..0000000 --- a/extras/PhysFS.NET/PhysFS.NET.sln +++ /dev/null @@ -1,21 +0,0 @@ -Microsoft Visual Studio Solution File, Format Version 7.00 -Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PhysFS.NET", "PhysFS.NET.csproj", "{C6205A43-3D4D-41E6-872C-96CD7BE55230}" -EndProject -Global - GlobalSection(SolutionConfiguration) = preSolution - ConfigName.0 = Debug - ConfigName.1 = Release - EndGlobalSection - GlobalSection(ProjectDependencies) = postSolution - EndGlobalSection - GlobalSection(ProjectConfiguration) = postSolution - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.ActiveCfg = Debug|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.Build.0 = Debug|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.ActiveCfg = Release|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.Build.0 = Release|.NET - EndGlobalSection - GlobalSection(ExtensibilityGlobals) = postSolution - EndGlobalSection - GlobalSection(ExtensibilityAddIns) = postSolution - EndGlobalSection -EndGlobal diff --git a/extras/PhysFS.NET/PhysFS.cs b/extras/PhysFS.NET/PhysFS.cs deleted file mode 100755 index 30b7dac..0000000 --- a/extras/PhysFS.NET/PhysFS.cs +++ /dev/null @@ -1,189 +0,0 @@ -/* PhysFS.cs - (c)2003 Gregory S. Read - * Provides access to PhysFS API calls not specific to file handle access. - */ -using System; - -namespace PhysFS_NET -{ - public class PhysFS - { - /* Initialize - * Inits the PhysFS API. This normally does not need to be called unless - * the API has been manually deinitialized since the PhysFS_DLL class - * initializes just before the first call is made into the DLL. - * Parameters - * none - * Returns - * none - * Exceptions - * PhysFSException - An error occured in the PhysFS API - */ - public static void Initialize() - { - // Initialize the physfs library, raise an exception if error - if(PhysFS_DLL.PHYSFS_init("") == 0) - throw new PhysFSException(); - } - - /* Deinitialize - * Deinits the PhysFS API. It is recommended that this method be called - * by the application before exiting in order to gracefully deallocate - * resources and close all filehandles, etc. - * Parameters - * none - * Returns - * none - * Exceptions - * PhysFSException - An error occured in the PhysFS API - */ - public static void Deinitialize() - { - // Deinit, raise an exception if an error occured - if(PhysFS_DLL.PHYSFS_deinit() == 0) - throw new PhysFSException(); - } - - /* BaseDir - * Gets the base directory configured for PhysFS. See the PhysFS API - * documentation for more information. - * Parameters - * none - * Returns - * A string value representing the Base Directory - * Exceptions - * none - */ - public static string BaseDir - { - get - { - // Return the current base directory - return PhysFS_DLL.PHYSFS_getBaseDir(); - } - } - - /* WriteDir - * Gets or sets the write directory configured for PhysFS. See the PhysFS API - * documentation for more information. - * Parameters - * set - Path to set the WriteDir property to - * Returns - * A string value representing the Write Directory - * Exceptions - * PhysFSException - An error occured in the PhysFS API when - * settings the write directory. - */ - public static string WriteDir - { - get - { - // Return the current write directory - return PhysFS_DLL.PHYSFS_getWriteDir(); - } - set - { - // Set the write directory and raise an exception if an error occured - if(PhysFS_DLL.PHYSFS_setWriteDir(value) == 0) - throw new PhysFSException(); - } - } - - /* UserDir - * Gets or sets the write directory configured for PhysFS. See the PhysFS API - * documentation for more information. - * Parameters - * set - Path to set the WriteDir property to - * Returns - * A string value representing the Write Directory - * Exceptions - * PhysFSException - An error occured in the PhysFS API when - * settings the write directory. - */ - public static string UserDir - { - get - { - // Return the current user directory - return PhysFS_DLL.PHYSFS_getUserDir(); - } - } - public static void AddToSearchPath(string NewDir, bool Append) - { - if(PhysFS_DLL.PHYSFS_addToSearchPath(NewDir, Append?1:0) == 0) - throw new PhysFSException(); - } - public static void RemoveFromSearchPath(string OldDir) - { - if(PhysFS_DLL.PHYSFS_removeFromSearchPath(OldDir) == 0) - throw new PhysFSException(); - } - public unsafe static string[] GetSearchPath() - { - byte** p; // Searchpath list from PhysFS dll - string[] pathlist; // List converted to an array - - // Get the CDROM drive listing - p = PhysFS_DLL.PHYSFS_getSearchPath(); - // Convert the C-style array to a .NET style array - pathlist = PhysFS_DLL.BytePPToArray(p); - // Free the original list since we're done with it - PhysFS_DLL.PHYSFS_freeList(p); - - return pathlist; - } - public unsafe static string[] GetCDROMDrives() - { - byte** p; // CDROM list from PhysFS dll - string[] cdromlist; // List converted to an array - - // Get the CDROM drive listing - p = PhysFS_DLL.PHYSFS_getCdRomDirs(); - // Convert the C-style array to a .NET style array - cdromlist = PhysFS_DLL.BytePPToArray(p); - // Free the original list since we're done with it - PhysFS_DLL.PHYSFS_freeList(p); - - return cdromlist; - } - public static void MkDir(string Dirname) - { - if(PhysFS_DLL.PHYSFS_mkdir(Dirname) == 0) - throw new PhysFSException(); - } - public static void Delete(string Filename) - { - if(PhysFS_DLL.PHYSFS_delete(Filename) == 0) - throw new PhysFSException(); - } - public static string GetRealDir(string Filename) - { - string RetValue; - - RetValue = PhysFS_DLL.PHYSFS_getRealDir(Filename); - if(RetValue == null) - throw new PhysFSException("File not found in search path."); - - // Return the real file path of the specified filename - return RetValue; - } - public unsafe static string[] EnumerateFiles(string Dirname) - { - byte** p; // File list from PhysFS dll - string[] filelist; // List converted to an array - - // Get the CDROM drive listing - p = PhysFS_DLL.PHYSFS_enumerateFiles(Dirname); - // Convert the C-style array to a .NET style array - filelist = PhysFS_DLL.BytePPToArray(p); - // Free the original list since we're done with it - PhysFS_DLL.PHYSFS_freeList(p); - - return filelist; - } - public static bool IsDirectory(string Filename) - { - // Return true if non-zero, otherwise return false - return (PhysFS_DLL.PHYSFS_isDirectory(Filename) == 0)?false:true; - } - } -} diff --git a/extras/PhysFS.NET/PhysFSFileStream.cs b/extras/PhysFS.NET/PhysFSFileStream.cs deleted file mode 100755 index c0f6b05..0000000 --- a/extras/PhysFS.NET/PhysFSFileStream.cs +++ /dev/null @@ -1,194 +0,0 @@ -/* PhysFSFileStream.cs - (c)2003 Gregory S. Read */ -using System; -using System.Collections; -using System.IO; - -namespace PhysFS_NET -{ - public enum PhysFSFileMode {Read, Write, Append}; - - // Our exception class we'll use for throwing all PhysFS API related exception - public class PhysFSException : IOException - { - public PhysFSException(string Message) : base(Message) {} - public PhysFSException() : base(PhysFS_DLL.PHYSFS_getLastError()) {} - } - - public unsafe class PhysFSFileStream : Stream - { - // ***Public properties*** - public override bool CanRead - { - get - { - // Reading is supported - return true; - } - } - - public override bool CanSeek - { - get - { - // Seek is supported - return true; - } - } - - public override bool CanWrite - { - get - { - // Writing is supported - return true; - } - } - - public override long Length - { - get - { - long TempLength; - TempLength = PhysFS_DLL.PHYSFS_fileLength(pHandle); - - // If call returned an error, throw an exception - if(TempLength == -1) - throw new PhysFSException(); - - return TempLength; - } - } - - public override long Position - { - get - { - long TempPosition; - TempPosition = PhysFS_DLL.PHYSFS_tell(pHandle); - - // If call returned an error, throw an exception - if(TempPosition == -1) - throw new PhysFSException(); - - return TempPosition; - } - set - { - // Seek from beginning of file using the position value - Seek(value, SeekOrigin.Begin); - } - } - - // ***Public methods*** - public PhysFSFileStream(string FileName, PhysFSFileMode FileMode, ulong BufferSize) - { - // Open the specified file with the appropriate file access - switch(FileMode) - { - case PhysFSFileMode.Read: - pHandle = PhysFS_DLL.PHYSFS_openRead(FileName); - break; - case PhysFSFileMode.Write: - pHandle = PhysFS_DLL.PHYSFS_openWrite(FileName); - break; - case PhysFSFileMode.Append: - pHandle = PhysFS_DLL.PHYSFS_openAppend(FileName); - break; - default: - throw new PhysFSException("Invalid FileMode specified"); - } - - // If handle is null, an error occured, so raise an exception - //!!! Does object get created if exception is thrown? - if(pHandle == null) - throw new PhysFSException(); - - // Set buffer size, raise an exception if an error occured - if(PhysFS_DLL.PHYSFS_setBuffer(pHandle, BufferSize) == 0) - throw new PhysFSException(); - } - - // This constructor sets the buffer size to 0 if not specified - public PhysFSFileStream(string FileName, PhysFSFileMode FileMode) : this(FileName, FileMode, 0) {} - - ~PhysFSFileStream() - { - // Don't close the handle if they've specifically closed it already - if(!Closed) - Close(); - } - - public override void Flush() - { - if(PhysFS_DLL.PHYSFS_flush(pHandle) == 0) - throw new PhysFSException(); - } - - public override int Read(byte[] buffer, int offset, int count) - { - long RetValue; - - fixed(byte *pbytes = &buffer[offset]) - { - // Read into our allocated pointer - RetValue = PhysFS_DLL.PHYSFS_read(pHandle, pbytes, sizeof(byte), (uint)count); - } - - if(RetValue == -1) - throw new PhysFSException(); - - // Return number of bytes read - // Note: This cast should be safe since we are only reading 'count' items, which - // is of type 'int'. - return (int)RetValue; - } - - public override void Write(byte[] buffer, int offset, int count) - { - long RetValue; - - fixed(byte* pbytes = &buffer[offset]) - { - // Write buffer - RetValue = PhysFS_DLL.PHYSFS_write(pHandle, pbytes, sizeof(byte), (uint)count); - } - - if(RetValue == -1) - throw new PhysFSException(); - } - - public override long Seek(long offset, SeekOrigin origin) - { - // Only seeking from beginning is supported by PhysFS API - if(origin != SeekOrigin.Begin) - throw new PhysFSException("Only seek origin of \"Begin\" is supported"); - - // Seek to specified offset, raise an exception if error occured - if(PhysFS_DLL.PHYSFS_seek(pHandle, (ulong)offset) == 0) - throw new PhysFSException(); - - // Since we always seek from beginning, the offset is always - // the absolute position. - return offset; - } - - public override void SetLength(long value) - { - throw new NotSupportedException("SetLength method not supported in PhysFSFileStream objects."); - } - - public override void Close() - { - // Close the handle - if(PhysFS_DLL.PHYSFS_close(pHandle) == 0) - throw new PhysFSException(); - - // File has been closed. Rock. - Closed = true; - } - - // ***Private variables*** - private void *pHandle; - private bool Closed = false; - } -} \ No newline at end of file diff --git a/extras/PhysFS.NET/PhysFS_DLL.cs b/extras/PhysFS.NET/PhysFS_DLL.cs deleted file mode 100755 index bc9300c..0000000 --- a/extras/PhysFS.NET/PhysFS_DLL.cs +++ /dev/null @@ -1,113 +0,0 @@ -/* PhysFS_DLL - (c)2003 Gregory S. Read - * Internal class that provides direct access to the PhysFS DLL. It is - * not accessible outside of the PhysFS.NET assembly. - */ -using System.Collections; -using System.Runtime.InteropServices; - -namespace PhysFS_NET -{ - internal class PhysFS_DLL - { - /* Static constructor - * Initializes the PhysFS API before any method is called in this class. This - * relieves the user from having to explicitly initialize the API. - * Parameters - * none - * Returns - * none - * Exceptions - * PhysFSException - An error occured in the PhysFS API - */ - static PhysFS_DLL() - { - if(PHYSFS_init("") == 0) - throw new PhysFSException(); - } - - /* BytePPToArray - * Converts a C-style string array into a .NET managed string array - * Parameters - * C-style string array pointer returned from PhysFS - * Returns - * .NET managed string array - * Exceptions - * none - */ - public unsafe static string[] BytePPToArray(byte **bytearray) - { - byte** ptr; - byte* c; - string tempstr; - ArrayList MyArrayList = new ArrayList(); - string[] RetArray; - - for(ptr = bytearray; *ptr != null; ptr++) - { - tempstr = ""; - for(c = *ptr; *c != 0; c++) - { - tempstr += (char)*c; - } - - // Add string to our list - MyArrayList.Add(tempstr); - } - - // Return a normal array of the list - RetArray = new string[MyArrayList.Count]; - MyArrayList.CopyTo(RetArray, 0); - return RetArray; - } - - // Name of DLL to import - private const string PHYSFS_DLLNAME = "physfs.dll"; - - // DLL import declarations - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_init(string argv0); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_deinit(); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void PHYSFS_freeList(void *listVar); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getLastError(); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getDirSeparator(); - [DllImport(PHYSFS_DLLNAME)] public static extern void PHYSFS_permitSymbolicLinks(int allow); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_getCdRomDirs(); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getBaseDir(); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getUserDir(); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getWriteDir(); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_setWriteDir(string newDir); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_addToSearchPath(string newDir, int appendToPath); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_removeFromSearchPath(string oldDir); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_getSearchPath(); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_setSaneConfig(string organization, - string appName, - string archiveExt, - int includeCdRoms, - int archivesFirst); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_mkdir(string dirName); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_delete(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getRealDir(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_enumerateFiles(string dir); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_exists(string fname); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_isDirectory(string fname); - [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_isSymbolicLink(string fname); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openWrite(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openAppend(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openRead(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_close(void* handle); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_getLastModTime(string filename); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_read(void* handle, - void *buffer, - uint objSize, - uint objCount); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_write(void* handle, - void *buffer, - uint objSize, - uint objCount); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_eof(void* handle); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_tell(void* handle); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_seek(void* handle, ulong pos); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_fileLength(void* handle); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_setBuffer(void* handle, ulong bufsize); - [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_flush(void* handle); - } -} diff --git a/extras/PhysFS.NET/README.txt b/extras/PhysFS.NET/README.txt deleted file mode 100755 index 62ecf63..0000000 --- a/extras/PhysFS.NET/README.txt +++ /dev/null @@ -1,10 +0,0 @@ -PhysFS.NET is a library that encapsulates the PhysFS API into a .NET assembly. - -There are two class objects that are exposed in the assembly: - PhysFS.cs - This class exposes any non-filehandle specific functionality contained in - the PhysFS library. - PhysFSFileStream.cs - A System.IO.Stream derived class which provides file access via the - PhysFS API. Usage of this object is identical to a standard stream - object. \ No newline at end of file diff --git a/extras/PhysFS.NET/TestApp/App.ico b/extras/PhysFS.NET/TestApp/App.ico deleted file mode 100755 index 3a5525f..0000000 Binary files a/extras/PhysFS.NET/TestApp/App.ico and /dev/null differ diff --git a/extras/PhysFS.NET/TestApp/AssemblyInfo.cs b/extras/PhysFS.NET/TestApp/AssemblyInfo.cs deleted file mode 100755 index 177a4f0..0000000 --- a/extras/PhysFS.NET/TestApp/AssemblyInfo.cs +++ /dev/null @@ -1,58 +0,0 @@ -using System.Reflection; -using System.Runtime.CompilerServices; - -// -// General Information about an assembly is controlled through the following -// set of attributes. Change these attribute values to modify the information -// associated with an assembly. -// -[assembly: AssemblyTitle("")] -[assembly: AssemblyDescription("")] -[assembly: AssemblyConfiguration("")] -[assembly: AssemblyCompany("")] -[assembly: AssemblyProduct("")] -[assembly: AssemblyCopyright("")] -[assembly: AssemblyTrademark("")] -[assembly: AssemblyCulture("")] - -// -// Version information for an assembly consists of the following four values: -// -// Major Version -// Minor Version -// Build Number -// Revision -// -// You can specify all the values or you can default the Revision and Build Numbers -// by using the '*' as shown below: - -[assembly: AssemblyVersion("1.0.*")] - -// -// In order to sign your assembly you must specify a key to use. Refer to the -// Microsoft .NET Framework documentation for more information on assembly signing. -// -// Use the attributes below to control which key is used for signing. -// -// Notes: -// (*) If no key is specified, the assembly is not signed. -// (*) KeyName refers to a key that has been installed in the Crypto Service -// Provider (CSP) on your machine. KeyFile refers to a file which contains -// a key. -// (*) If the KeyFile and the KeyName values are both specified, the -// following processing occurs: -// (1) If the KeyName can be found in the CSP, that key is used. -// (2) If the KeyName does not exist and the KeyFile does exist, the key -// in the KeyFile is installed into the CSP and used. -// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility. -// When specifying the KeyFile, the location of the KeyFile should be -// relative to the project output directory which is -// %Project Directory%\obj\. For example, if your KeyFile is -// located in the project directory, you would specify the AssemblyKeyFile -// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] -// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework -// documentation for more information on this. -// -[assembly: AssemblyDelaySign(false)] -[assembly: AssemblyKeyFile("")] -[assembly: AssemblyKeyName("")] diff --git a/extras/PhysFS.NET/TestApp/TestApp.csproj b/extras/PhysFS.NET/TestApp/TestApp.csproj deleted file mode 100755 index e576a21..0000000 --- a/extras/PhysFS.NET/TestApp/TestApp.csproj +++ /dev/null @@ -1,116 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/extras/PhysFS.NET/TestApp/TestApp.sln b/extras/PhysFS.NET/TestApp/TestApp.sln deleted file mode 100755 index d339089..0000000 --- a/extras/PhysFS.NET/TestApp/TestApp.sln +++ /dev/null @@ -1,27 +0,0 @@ -Microsoft Visual Studio Solution File, Format Version 7.00 -Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TestApp", "TestApp.csproj", "{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}" -EndProject -Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PhysFS.NET", "..\PhysFS.NET.csproj", "{C6205A43-3D4D-41E6-872C-96CD7BE55230}" -EndProject -Global - GlobalSection(SolutionConfiguration) = preSolution - ConfigName.0 = Debug - ConfigName.1 = Release - EndGlobalSection - GlobalSection(ProjectDependencies) = postSolution - EndGlobalSection - GlobalSection(ProjectConfiguration) = postSolution - {9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Debug.ActiveCfg = Debug|.NET - {9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Debug.Build.0 = Debug|.NET - {9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Release.ActiveCfg = Release|.NET - {9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Release.Build.0 = Release|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.ActiveCfg = Debug|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.Build.0 = Debug|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.ActiveCfg = Release|.NET - {C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.Build.0 = Release|.NET - EndGlobalSection - GlobalSection(ExtensibilityGlobals) = postSolution - EndGlobalSection - GlobalSection(ExtensibilityAddIns) = postSolution - EndGlobalSection -EndGlobal diff --git a/extras/PhysFS.NET/TestApp/TestAppForm.cs b/extras/PhysFS.NET/TestApp/TestAppForm.cs deleted file mode 100755 index b897ae6..0000000 --- a/extras/PhysFS.NET/TestApp/TestAppForm.cs +++ /dev/null @@ -1,274 +0,0 @@ -using System; -using System.Drawing; -using System.Collections; -using System.ComponentModel; -using System.Windows.Forms; -using System.Data; -using System.IO; -using PhysFS_NET; - -namespace TestApp -{ - /// - /// Summary description for Form1. - /// - public class TestAppForm : System.Windows.Forms.Form - { - private System.Windows.Forms.Label label2; - private System.Windows.Forms.Button RefreshCDsButton; - private System.Windows.Forms.ListBox CDDrivesList; - private System.Windows.Forms.ListBox SearchPathList; - private System.Windows.Forms.Label label1; - private System.Windows.Forms.TextBox EnumFilesPath; - private System.Windows.Forms.ListBox EnumList; - private System.Windows.Forms.Label label3; - private System.Windows.Forms.TextBox NewSearchPathText; - private System.Windows.Forms.Button AddSearchPathButton; - private System.Windows.Forms.Button RemovePathButton; - private System.Windows.Forms.Button RefreshEnumList; - private System.Windows.Forms.Button RefreshSearchPathButton; - /// - /// Required designer variable. - /// - private System.ComponentModel.Container components = null; - - public TestAppForm() - { - // - // Required for Windows Form Designer support - // - InitializeComponent(); - - // - // TODO: Add any constructor code after InitializeComponent call - // - } - - /// - /// Clean up any resources being used. - /// - protected override void Dispose( bool disposing ) - { - if( disposing ) - { - if (components != null) - { - components.Dispose(); - } - } - base.Dispose( disposing ); - } - - #region Windows Form Designer generated code - /// - /// Required method for Designer support - do not modify - /// the contents of this method with the code editor. - /// - private void InitializeComponent() - { - this.label2 = new System.Windows.Forms.Label(); - this.RefreshCDsButton = new System.Windows.Forms.Button(); - this.CDDrivesList = new System.Windows.Forms.ListBox(); - this.SearchPathList = new System.Windows.Forms.ListBox(); - this.label1 = new System.Windows.Forms.Label(); - this.EnumFilesPath = new System.Windows.Forms.TextBox(); - this.EnumList = new System.Windows.Forms.ListBox(); - this.label3 = new System.Windows.Forms.Label(); - this.RefreshEnumList = new System.Windows.Forms.Button(); - this.NewSearchPathText = new System.Windows.Forms.TextBox(); - this.AddSearchPathButton = new System.Windows.Forms.Button(); - this.RemovePathButton = new System.Windows.Forms.Button(); - this.RefreshSearchPathButton = new System.Windows.Forms.Button(); - this.SuspendLayout(); - // - // label2 - // - this.label2.Location = new System.Drawing.Point(8, 8); - this.label2.Name = "label2"; - this.label2.Size = new System.Drawing.Size(136, 16); - this.label2.TabIndex = 2; - this.label2.Text = "Available CD-ROM Drives"; - // - // RefreshCDsButton - // - this.RefreshCDsButton.Location = new System.Drawing.Point(8, 152); - this.RefreshCDsButton.Name = "RefreshCDsButton"; - this.RefreshCDsButton.Size = new System.Drawing.Size(72, 24); - this.RefreshCDsButton.TabIndex = 4; - this.RefreshCDsButton.Text = "Refresh"; - this.RefreshCDsButton.Click += new System.EventHandler(this.RefreshCDsButton_Click); - // - // CDDrivesList - // - this.CDDrivesList.Location = new System.Drawing.Point(8, 24); - this.CDDrivesList.Name = "CDDrivesList"; - this.CDDrivesList.Size = new System.Drawing.Size(136, 121); - this.CDDrivesList.TabIndex = 7; - // - // SearchPathList - // - this.SearchPathList.Location = new System.Drawing.Point(152, 24); - this.SearchPathList.Name = "SearchPathList"; - this.SearchPathList.Size = new System.Drawing.Size(248, 95); - this.SearchPathList.TabIndex = 8; - // - // label1 - // - this.label1.Location = new System.Drawing.Point(152, 8); - this.label1.Name = "label1"; - this.label1.Size = new System.Drawing.Size(136, 16); - this.label1.TabIndex = 10; - this.label1.Text = "Search Path"; - // - // EnumFilesPath - // - this.EnumFilesPath.Location = new System.Drawing.Point(408, 128); - this.EnumFilesPath.Name = "EnumFilesPath"; - this.EnumFilesPath.Size = new System.Drawing.Size(208, 20); - this.EnumFilesPath.TabIndex = 11; - this.EnumFilesPath.Text = ""; - // - // EnumList - // - this.EnumList.Location = new System.Drawing.Point(408, 24); - this.EnumList.Name = "EnumList"; - this.EnumList.Size = new System.Drawing.Size(208, 95); - this.EnumList.TabIndex = 12; - // - // label3 - // - this.label3.Location = new System.Drawing.Point(408, 8); - this.label3.Name = "label3"; - this.label3.Size = new System.Drawing.Size(136, 16); - this.label3.TabIndex = 13; - this.label3.Text = "Enumerate Files"; - // - // RefreshEnumList - // - this.RefreshEnumList.Location = new System.Drawing.Point(544, 152); - this.RefreshEnumList.Name = "RefreshEnumList"; - this.RefreshEnumList.Size = new System.Drawing.Size(72, 24); - this.RefreshEnumList.TabIndex = 14; - this.RefreshEnumList.Text = "Refresh"; - this.RefreshEnumList.Click += new System.EventHandler(this.RefreshEnumList_Click); - // - // NewSearchPathText - // - this.NewSearchPathText.Location = new System.Drawing.Point(152, 128); - this.NewSearchPathText.Name = "NewSearchPathText"; - this.NewSearchPathText.Size = new System.Drawing.Size(248, 20); - this.NewSearchPathText.TabIndex = 15; - this.NewSearchPathText.Text = ""; - // - // AddSearchPathButton - // - this.AddSearchPathButton.Location = new System.Drawing.Point(152, 152); - this.AddSearchPathButton.Name = "AddSearchPathButton"; - this.AddSearchPathButton.Size = new System.Drawing.Size(72, 24); - this.AddSearchPathButton.TabIndex = 9; - this.AddSearchPathButton.Text = "Add Path"; - this.AddSearchPathButton.Click += new System.EventHandler(this.AddSearchPathButton_Click); - // - // RemovePathButton - // - this.RemovePathButton.Location = new System.Drawing.Point(232, 152); - this.RemovePathButton.Name = "RemovePathButton"; - this.RemovePathButton.Size = new System.Drawing.Size(88, 24); - this.RemovePathButton.TabIndex = 16; - this.RemovePathButton.Text = "Remove Path"; - this.RemovePathButton.Click += new System.EventHandler(this.RemovePathButton_Click); - // - // RefreshSearchPathButton - // - this.RefreshSearchPathButton.Location = new System.Drawing.Point(328, 152); - this.RefreshSearchPathButton.Name = "RefreshSearchPathButton"; - this.RefreshSearchPathButton.Size = new System.Drawing.Size(72, 24); - this.RefreshSearchPathButton.TabIndex = 17; - this.RefreshSearchPathButton.Text = "Refresh"; - this.RefreshSearchPathButton.Click += new System.EventHandler(this.RefreshSearchPathButton_Click); - // - // TestAppForm - // - this.AutoScaleBaseSize = new System.Drawing.Size(5, 13); - this.ClientSize = new System.Drawing.Size(624, 309); - this.Controls.AddRange(new System.Windows.Forms.Control[] { - this.RefreshSearchPathButton, - this.RemovePathButton, - this.NewSearchPathText, - this.RefreshEnumList, - this.label3, - this.EnumList, - this.EnumFilesPath, - this.label1, - this.SearchPathList, - this.CDDrivesList, - this.RefreshCDsButton, - this.label2, - this.AddSearchPathButton}); - this.Name = "TestAppForm"; - this.Text = "PhysFS Test Application"; - this.Load += new System.EventHandler(this.TestAppForm_Load); - this.ResumeLayout(false); - - } - #endregion - - /// - /// The main entry point for the application. - /// - [STAThread] - static void Main() - { - Application.Run(new TestAppForm()); - } - - private void TestAppForm_Load(object sender, System.EventArgs e) - { - - } - - private void RefreshCDsButton_Click(object sender, System.EventArgs e) - { - // Clear ths listbox if it contains any items - CDDrivesList.Items.Clear(); - // Add the items to the list - CDDrivesList.Items.AddRange(PhysFS.GetCDROMDrives()); - } - - private void RefreshSearchPathButton_Click(object sender, System.EventArgs e) - { - // Clear ths listbox if it contains any items - SearchPathList.Items.Clear(); - // Add the items to the list - SearchPathList.Items.AddRange(PhysFS.GetSearchPath()); - } - - private void AddSearchPathButton_Click(object sender, System.EventArgs e) - { - // Add search path - PhysFS.AddToSearchPath(NewSearchPathText.Text, false); - // Clear ths listbox if it contains any items - SearchPathList.Items.Clear(); - // Add the items to the list - SearchPathList.Items.AddRange(PhysFS.GetSearchPath()); - } - - private void RemovePathButton_Click(object sender, System.EventArgs e) - { - if(SearchPathList.SelectedItem != null) - { - PhysFS.RemoveFromSearchPath(SearchPathList.SelectedItem.ToString()); - // Clear ths listbox if it contains any items - SearchPathList.Items.Clear(); - // Add the items to the list - SearchPathList.Items.AddRange(PhysFS.GetSearchPath()); - } - } - - private void RefreshEnumList_Click(object sender, System.EventArgs e) - { - EnumList.Items.Clear(); - EnumList.Items.AddRange(PhysFS.EnumerateFiles(EnumFilesPath.Text)); - } - } -} diff --git a/extras/PhysFS.NET/TestApp/TestAppForm.resx b/extras/PhysFS.NET/TestApp/TestAppForm.resx deleted file mode 100755 index 26e9d79..0000000 --- a/extras/PhysFS.NET/TestApp/TestAppForm.resx +++ /dev/null @@ -1,102 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - text/microsoft-resx - - - 1.3 - - - System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - - - System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 - - - TestAppForm - - \ No newline at end of file diff --git a/extras/README-CSharp.txt b/extras/README-CSharp.txt new file mode 100644 index 0000000..863c0db --- /dev/null +++ b/extras/README-CSharp.txt @@ -0,0 +1,11 @@ +There used to be C# bindings in this directory, but they have been +unmaintained for many years. + +Instead, there is a more modern PhysicsFS wrapper for .NET available. + +You can find it at https://github.com/frabert/SharpPhysFS + +Thanks to Francesco Bertolaccini for his efforts on that project! + +--ryan. +