- Stored global information about cppcheck version and copyright string in a single resource.h file.
- Use macros of windows.h instead of numeric values for filetype, etc.
- Added versioninfo metadata to lib (#4275)
- Removed VS resource editor code from resource files - these files shouldn't be modified with it to avoid information loss
- Renamed files to version.h/rc
- Encoded files as ANSI again - use escape sequences for unicode characters in literals (#4281)
If user tried to save results after re-checking files and not
getting new results by the re-check, the save was failed since
Cppcheck thought there were no results. This was caused by wrong
clearing of "has results" flag when removing single items from
the results.
Ticket: #4121 (Bogus error message when saving the report)
Currently if there were results in the GUI the results from XML
file were imported to list of results. This is confusing and not
what users usually want to do.
This patch makes GUI to clear the results before opening new
results from XML file.
Ticket #3829 (Rename open xml to import xml)
The Polish translation doesn't have any translated text. So it is
only waste of resources to have it available. And it may confuse
some people who try it.
Ticket #4008 (GUI: Polish translation does not translate and should be removed)
When I updated it through QT, it added some missing things to the other translation files, I hope that doesn't break anything :x
So far from what I've tested, everything works fine.
When adding a new include path check if the path is relative path to
the project file's path. If path is relative then remove the begin of
the path making it a relative path in project file.
Ticket: #3019 (GUI: Add project include paths as relative paths)
It is handy to remember the last location of the opened project file.
Currently the Open Project -dialog was always opened to location of
the executable file. Which is never the correct place. But last
opened project file location might at least be near the location user
wants to open next.
Ticket: #3493 (GUI: remember last path in Open Project File)
The GUI crashed if the project file was tried to open from the
command line. The project file loading was run before the MRU menu
was created but tried to add a new item to it.
Project file can't be opened when the check is running. So the menu
items must be disabled.
Fixes ticket: #3446 (GUI: MRU items must be disabled while checking)
There was (obviously) a copy-paste bug in code converting severities
to GUI's show types. This caused some severities not being
filtered correctly when severity selection in GUI was changed.
Fixes ticket: #3242 (GUI: Unmatched suppression: message in wrong category)
We are using ShowTypes around the GUI codebase so it makes sense
to have it in its own class. And the class also contains related
helper functions instead of scattering them around different
classes.
ShowTypes also contains the visibility settings for all the
GUI severities. Implementation in this commit makes ShowTypes
class to load the visibility settings when it is created. And save
the settings when it is destroyed.
"default" as platform name/definition doesn't tell much and would
only confuse users. "Build-in" is not perfect either but it is
best I've can come with before the release.
Ticket: #3156 (GUI: "default" platform needs proper name)
When GUI was started not all the categories visibility statuses
were not preserved. I.e.
Ticket: #3087 (GUI does not show all reported files until a filter button state is changed)
The iterator was not advanced in the loop. So the code worked when
I ran it in Linux as the first item was matching.
Thanks for Robert for spotting and reporting it.
When running in Windows platforms, set the GUI's checked platform
initially to Windows 32-bit ANSI. Other platforms are set
initially to default/unspecified which means the type sizes are
from the platform GUI was compiled on.
This was suggested by Rober in ticket #3119.
We have now one list for checked platforms, menu items are created
dynamically based on that list. This makes it much easier to alter
the platforms list later on.
This is quick and dirty patch to add the platform selection for
the GUI. It is simple menu selection in Check-menu. It always
defaults to "Default" at startup. And it forget the selection
when the application is closed.
Ticket: #3119 (GUI: add ability to specify platform type)
Refactor the code formatting statistics dialog content so that
the strings are easier to translate. Old formatting with embedded
HTML was practically impossible for translators to translate. New
code isn't very beautiful either but at least translating is now
possible.
Ticket: #2726 (GUI: HTML-formatted statistics report text hard to translate)
The CLI/LIB change earlier added own enable-flag for performance-
and portability-checks. This commit updates GUI to also enable
those new enable-flags.
Per project include directories must be added to the list before
the global include directories. Include directories are searched
in listed order. So placing per project include directories first
we ensure per project include file is found instead of the global
include file if same file exist in both.
The extra menu separator was added before the MRU menu items. When
updating the (menu) MRU items existing items were first removed
and new items added back. But the added separator was not removed.
Earlier the GUI (project) went into some weird state after creating
a new project. The project could not be checked in any discoverable
way.
This commit fixes the above bug by automatically checking the new
project after the project dialog is closed. I think this is what
most users expect to happen.
Exclude is the correct term to use when removing paths from the
list of checked items. Ignore as a term was a poor choise to begin
with. XML file reading still recognizes and reads the 'ignore'
element but writes 'exclude' element.
Ticket: #2995 (GUI: Rename ignore-feature to exclude-feature)
Since include dir order is important (Cppcheck uses the first file
it finds) user must be able to edit the order of include paths.
This commit adds "Up" and "Down" buttons to the Project-dialog's
inlude paths-tab. User can use those two buttons to re-order the
include directories.
Ticket: #3037 (GUI: Allow reordering include paths in project dialog)
The 'Project' label in Project-dialog is confusing and users think
it is project's name. When it acutually is the root directory of
the project. So rename the lable and move it below the 'Defines'-
field to make it less important looking.
Ticket: #2997 (GUI: 'Project'-field in project file-dialog is confusing)
The benchmark data file had errors when checking with Cppcheck.
And people reported these errors. So replace the file with one
that has no (currently found) errors.
The script is available in another repository. I don't want to
distribute it with Cppcheck sources for now. Maybe if and when
there is more interest towards GUI tests...
If the "extra version" is defined (not empty) then it is shown
after the actual version number in the About-dialog.
Ticket: #2164 ([GUI] Add revision info to "About" window)
If strings contain only formatting placeholders for the dynamically
formatted text it does not make sense to mark the strings as
translatable. There is nothing translators can translate e.g. in
"%p".
When Filter-toolbar was enabled/disabled from the View-menu its
state was not updated to the context menu. And vice versa.
Ticket: #2923 (GUI: Filter toolbar menu items not synchronized)
There always should be default editor if there is editor
application configured. But it is possible in some cases that
default application is "lost". So check that we have default
application configured before trying to use it. And inform user
to configure default application instead of silently failing to
open the application (and the file) for the user.
Don't use recursion in the script. The Python's os.walk() already
lists all files in subdirectories and using recursion only caused
tests to be found twice. Also handle the case the project file
defines binary path with DESTDIR define.
Improve the runner script to run only tests whose binary file
exists. Tests with inexistant binary file are not counted into
test counts in the summary.
Add the MIT license header. I'm now maintaining this script in
external repository with MIT license. So I can use the script
in other projects too.
Use build-time define to set the path to the source files
directory. Which then can be used to format path to the test
data. This allows running tests from out-of-source-tree -builds
that e.g. QtCreator does.
Test was using and assuming that severity string starts with
capital letter (e.g. "Style"). But the strings are all lowercase
letters.
Ticket #2832 (GUI: XML version 1 test fails)
Start building each test as separate project as QtestLib tests
usually are built. This commit adds the infrastructure and moves
TranslationHandler test as own project.
Fix I did yesterday gave only filename of the project file for
function loading project file. Causing the loading failing if
not in "current" directory.
If we there is project file in the directory to check then ask
user if one wants to use the project file instead. If there are
multiple project files then just tell there are project files
and ask if user wants to continue without using them.
Ticket: #2816 (GUI regression: Interrupted checking because of too many #ifdef configurations.)
If the project file does not define paths to check then check the
project root directory (which likely is the directory where the
project file is located).
Ticket #2816 (GUI regression: Interrupted checking because of too many #ifdef configurations.)
PKEuS
Edoardo Prezioso
Frank Zingsheim
XhmikosR
Alexander Mai
arm_in
Daniel Marjamäki
Kimmo Varis
Changkyoon Kim
Ryan Pavlik
Daniel Marjamäki
Reijo Tomperi
Stefan Weil
larudwer
vBm
Ettl Martin
lioncash
Marek Zmysłowski
Thomas Jarosch
Ryan Pavlik
unknown
Robert Reif
Zachary Blair