We regeressed Malayalam in 508cc3d3cf
This brings down the failures to 198 (from 750).
BENGALI: 353725 out of 354188 tests passed. 463 failed (0.130722%)
DEVANAGARI: 707307 out of 707394 tests passed. 87 failed (0.0122987%)
GUJARATI: 366349 out of 366457 tests passed. 108 failed (0.0294714%)
GURMUKHI: 60732 out of 60747 tests passed. 15 failed (0.0246926%)
KANNADA: 951190 out of 951913 tests passed. 723 failed (0.0759523%)
KHMER: 299070 out of 299124 tests passed. 54 failed (0.0180527%)
MALAYALAM: 1048136 out of 1048334 tests passed. 198 failed (0.0188871%)
ORIYA: 42320 out of 42329 tests passed. 9 failed (0.021262%)
SINHALA: 271662 out of 271847 tests passed. 185 failed (0.068053%)
TAMIL: 1091753 out of 1091754 tests passed. 1 failed (9.15957e-05%)
TELUGU: 970555 out of 970573 tests passed. 18 failed (0.00185457%)
MYANMAR: 1123865 out of 1123883 tests passed. 18 failed (0.00160159%)
Test stats remain unchanged, except for Malayalam, which we investigate:
BENGALI: 353725 out of 354188 tests passed. 463 failed (0.130722%)
DEVANAGARI: 707307 out of 707394 tests passed. 87 failed (0.0122987%)
GUJARATI: 366349 out of 366457 tests passed. 108 failed (0.0294714%)
GURMUKHI: 60732 out of 60747 tests passed. 15 failed (0.0246926%)
KANNADA: 951190 out of 951913 tests passed. 723 failed (0.0759523%)
KHMER: 299070 out of 299124 tests passed. 54 failed (0.0180527%)
MALAYALAM: 1047584 out of 1048334 tests passed. 750 failed (0.0715421%)
ORIYA: 42320 out of 42329 tests passed. 9 failed (0.021262%)
SINHALA: 271662 out of 271847 tests passed. 185 failed (0.068053%)
TAMIL: 1091753 out of 1091754 tests passed. 1 failed (9.15957e-05%)
TELUGU: 970555 out of 970573 tests passed. 18 failed (0.00185457%)
Myanmar, compared to Windows 10 mmrtext.ttf:
MYANMAR: 1123865 out of 1123883 tests passed. 18 failed (0.00160159%)
On Windows 10 we are seeing that other error message...
Test sequence: U+0995,U+-9CD,U+09B0
With Nirmala shipped on Windows 10, this failed to form the below form.
Works now.
Reported by Sairus.
Say, if we are ligating "A B_C m D", then previously 'm' was being
attached to 'B' in the combined A_B_C_D ligature. Now we attach it
to 'C'. No test for this though :(.
We use three bits for lig_id these days, so we finally got a report of
two separate ligatures with the same lig_id happening adjacent to each
other, and then the component-handling code was breaking things.
Protect against that by ignoring same-lig-id but lig-comp=0 glyphs after
a new ligature.
Fixes https://github.com/behdad/harfbuzz/issues/198
Before, we were just checking the use_category(). This detects as
halant a ligature that had the halant as first glyph (as seen in
NotoSansBalinese.) Change that to use the is_ligated() glyph prop
bit. The font is forming this ligature in ccmp, which is before
the rphf / pref tests. So we need to make sure the "ligated" bit
survives those tests. Since those only check the "substituted" bit,
we now only clear that bit for them and "ligated" survives.
Fixes https://github.com/behdad/harfbuzz/issues/180
- use '-w' instead of '\<...\>' for check-header-guards
grep manpage says these are the same
- put '-q' first in the grep options
- move VAR into hb-private.hh
- hb-font-private.hh - use [VAR] instead of [] for variable array
Back in the old days, we used to apply 'calt' and 'cswh' in Arabic shaper,
with a pause in between. Then we disabled the 'cswh' because Microsoft
disabled it, but forgot to remove the unnecessary pause. Do that now.
This has the benefit that it fixes shaping with monbaiti from Windows 10.
In that version of that font, the lookups from 'calt' are duplicated in
'rclt', and Mongolian was changed to go through Universal Shaping Engine.
We still use the Arabic shaper for Mongolian. With a pause after 'calt',
we were applying the duplicate lookups from 'calt' and 'rclt' twice. It
happened to be the case that these lookups were NOT idempotent. So we
were getting wrong shaping. See thread "Windows 10 monbaiti.ttf upgrade
(5.01 -> 5.51) caused loss of diacritical marks when shaped with harfbuz"
on the mailing list. This fixes that.
This aims to make Syriac Abbr Mark sizing more accurate when repeating segments are used, by adding an extra repeat and tightening up the spacing slightly rather than leaving a shortfall corresponding to a partial repeat-width.
This was brorken earlier, though, it's really hard to notice it.
Unlike the glyph_h_origin(), an unset glyph_v_origin() does NOT
mean that the vertical origin is at 0,0.
Related to https://github.com/behdad/harfbuzz/issues/187
Fixes https://github.com/behdad/harfbuzz/issues/187
Funcs implementations that have a non-zero horizontal origin must
implement the glyph_h_origin() callback, nothing new here.
Other implementations (all I know of!) can simply not set
glyph_h_origin() now. I did that for hb-ot and hb-ft in
44f8275080, though that broke the
fallback shaper because the default was returning false...
This prepares the headers for exporting symbols using visibility
attributes or __declspec(dllexport), so that we do not need to maintain
symbols listing files, as this is what was and is done in GLib and GTK+.
Behdad Esfahbod
Steven R. Loomis
jfkthame
Simon Cozens
Khaled Hosny
Martin Hosken
Chun-wei Fan
ThePhD