b37f99ca03
Connection error if payload size is strictly greater than (1 << 14) - 1
...
It would be desired to add option to make this limit configurable.
Fix scripted_recv_callback in tests.
2013-08-28 02:13:57 +09:00
82b9f78fc7
Check incoming header field name strictly
...
The validation rule is described in
http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-02#section-4.1.2
2013-08-25 17:39:29 +09:00
2d41c99289
Connection error if header continuation is employed by peer for now
2013-08-24 19:28:57 +09:00
005e60a5ed
Rework header compression
2013-08-23 23:38:28 +09:00
346fafde3f
Implement draft-ietf-httpbis-header-compression-02
2013-08-23 03:33:05 +09:00
d154faa9ab
Set protocol version draft-06
2013-08-23 03:33:05 +09:00
35229b250f
Treat reception of DATA in reserved stream as connection error
2013-08-23 03:33:05 +09:00
da384988cd
Add test for WINDOW_UPDATE against reserved
2013-08-23 03:33:05 +09:00
e278efdf38
Strict handling of connection error
...
Following cases are now treated as connection error of type
PROTOCOL_ERROR.
* Receiving HEADERS from client in reserved (local)
* Receiving PUSH_PROMISE against peer-initiated stream
* Receiving WINDOW_UPDATE against in reserved (local, remote)
2013-08-23 03:33:05 +09:00
0c9703fa2c
Remove NGHTTP2_FLAG_END_FLOW_CONTROL
2013-08-23 03:33:05 +09:00
b1ae1c30d8
Allow duplicate settings ID in SETTINGS
...
If multiple same ID are found, use the last one.
2013-08-23 03:33:05 +09:00
a52ca391a2
Do not RST_STREAM for DATA against nonexistent stream
...
This may be useful to the misbehaving implementation, but it could
result in lots of RST_STREAM, so just ignore it for now.
2013-08-10 15:13:53 +09:00
6ed8a8957b
Early termination if stream is not found
...
Add this check in nghttp2_submit_{priority, window_update, data,
push_promise}.
2013-08-10 00:02:24 +09:00
1155606d5e
Rewrite re-prioritization with PRIORITY
2013-08-09 23:40:41 +09:00
a3ff4cb50b
Rename window_size member of nghttp2_session as remote_window_size
2013-08-09 01:31:15 +09:00
19377fb3cd
Allow disabling auto WINDOW_UPDATE for connection and stream individually
...
Now NGHTTP2_OPT_NO_AUTO_WINDOW_UPDATE is split into 2 options:
NGHTTP2_OPT_NO_AUTO_STREAM_WINDOW_UPDATE and
NGHTTP2_OPT_NO_AUTO_CONNECTION_WINDOW_UPDATE.
This is preparation for the upcoming removal of END_FLOW_CONTROL
flag. For nghttpx, instead of using END_FLOW_CONTROL to disable
connection-level flow control, increase window size by large
enough value, which is friendly way to current chromium
implementation.
2013-08-09 01:23:39 +09:00
b979d2e8d2
Support increment/reduction of local window size by WINDOW_UPDATE
2013-08-09 00:58:52 +09:00
e67096fef3
Handle overflow in initial window update in stream
...
Rename window_size in nghttp2_stream as remote_window_size.
2013-08-08 21:12:49 +09:00
dcfa421d6f
Fix connection-level flow control (local)
...
Fix the bug that connection-level local window is not updated
for the data is the last part of the stream. For the stream
level window may ignore this, connection-level window must
be updated. Also this change fixes the bug that connection-level
window is not updated for the ignored DATA frames.
2013-08-07 22:02:30 +09:00
73563de8d4
Specify max length for header value and header block
...
The max length of header block is not used right now. It will
be used when header continuation is implemented.
2013-08-06 21:57:26 +09:00
737ac01d91
Add API for HTTP Upgrade
2013-08-03 18:05:14 +09:00
f9c566ec1f
Fix memory leak in unittest
2013-07-28 19:08:49 +09:00
8033152e80
Disable local flow control on FLOW_CONTROL_OPTIONS = 1
2013-07-28 19:05:51 +09:00
608a493925
Change initial window size to 65535
2013-07-27 21:26:47 +09:00
f74674aa7f
Fix header compression (again)
2013-07-27 19:23:05 +09:00
ddd04e8ced
Fix header compression bug, and perform always incremental indexing
2013-07-27 00:58:38 +09:00
e496800cb7
Fix header compression bug
2013-07-26 01:34:28 +09:00
1056d8690e
Rename functions related to HEADERS
2013-07-25 21:07:38 +09:00
84cbebf4f7
Implement server push
2013-07-25 01:59:48 +09:00
321136b042
nghttp2_hd: Don't malloc if namelen/valuelen are zero
2013-07-23 23:10:53 +09:00
0000d3e7f9
Add test for nghttp2_nv_array_from_cstr
2013-07-23 23:03:18 +09:00
b7ff05c4c6
Fail session if header compression failed on send
2013-07-23 22:47:15 +09:00
3c9e31da87
Don't substitute if same indexed header field name is already in working set
2013-07-23 02:52:08 +09:00
ef3caffe8b
Remove push related members from nghttp2_stream
2013-07-23 00:46:55 +09:00
0bcf90d32d
Support PRIORITY frame send and receive
2013-07-23 00:28:00 +09:00
9c58004a86
Cleanup
2013-07-20 01:24:34 +09:00
c3ed20b75d
Remove debug output
2013-07-20 01:19:33 +09:00
e92b74d66e
Use substitution as long as no eviction is required
2013-07-20 01:19:00 +09:00
aa4df35a10
Remove NGHTTP2_OPT_MAX_RECV_CTRL_FRAME_BUFFER option
2013-07-20 00:24:25 +09:00
30d2c86a7a
Remove old zlib compression and other cleanup
2013-07-20 00:20:16 +09:00
61bf7c6b02
Integrate new header compression
2013-07-20 00:08:14 +09:00
45c2245bfb
Implement header compression draft 01
2013-07-19 16:50:31 +09:00
a3bdda68f8
End flow control by WINDOW_UPDATE
2013-07-16 21:30:36 +09:00
d54cfb88ff
Add connection-level flow control
2013-07-16 20:54:24 +09:00
1fdaa7e59a
Disable flow control entirely with FLOW_CONTROL_OPTIONS
2013-07-16 18:26:57 +09:00
24cab312cf
Make spdycat and spdyd barely work
2013-07-16 00:15:04 +09:00
48cb017245
Implement HTTP-draft-04/2.0
2013-07-15 21:45:59 +09:00
05c1eeac85
Disable end_to_end test
...
Will enable it again when spdycat and spdyd are ready for http/2.0
2013-07-13 00:46:24 +09:00
0edce70343
Rebranding nghttp2
2013-07-13 00:43:06 +09:00
f47bf214e5
Allow server initiated stream ID in associated-stream-id
2013-04-05 23:24:28 +09:00
e543441ccc
tests: Fix compiler warning
2013-03-28 01:36:02 +09:00
439b34f49f
Don't allow control characters in outgoing name/value pairs
...
This check is done in spdylay_submit_* family functions and they will
return error if they found control characters.
2013-03-23 21:23:13 +09:00
10c54e44ba
Don't pack multiple empty header values in one header field
...
SPDY spec does not allow multiple empty header values in one header
field. This change makes out-going framer ignore such empty header
value if there is non-empty header value with the same name.
2013-03-23 19:31:22 +09:00
2ca7b51eb6
Fix the incoming last empty header value is not checked properly
...
This change fixes the bug that spdylay_frame_unpack_nv does not check
the size of header value if it is the last value in NULL separated
list.
2013-03-23 18:50:36 +09:00
c235800a1a
Link -ldl with tests only
2013-01-27 16:48:52 +09:00
5adfd07e7c
Fix SPDY/3 priority pack and unpack handling
2013-01-20 19:04:04 +09:00
8a2020362d
tests: Use traditional C-style comments
2012-11-14 21:00:36 +09:00
46e7da2166
Get rid of flags member in spdylay_map
2012-10-05 23:41:49 +09:00
24e932dfa2
Iterative treap implementation
...
This change implements spdylay_map functions in iterative approach
instead of original recursive approach. The iterative version is
overall faster than recursive one. The traversal function
(spdylay_map_each) is slightly slower but it is not noticeable.
2012-10-05 00:46:03 +09:00
e69947a054
Removed trailing spaces
2012-10-01 21:51:24 +09:00
58619a4f97
Enable name/value header compression on server side
2012-09-15 00:47:17 +09:00
088e4f15a2
Check frame length after packing a frame
...
If resultant length of a frame exceeds the maximum value (which is
2**24 - 1 for SPDY/2 and 3), SPDYLAY_ERR_FRAME_TOO_LARGE is used to
indicate this error. This error will be notified by
on_ctrl_not_send_callback.
2012-09-14 22:41:55 +09:00
b8d0b4034c
Eliminate malloc in spdylay_map
...
We use intrusive style pattern in spdylay_stream, which now has
spdylay_map_entry has its first member.
2012-09-12 00:13:02 +09:00
ca415a2a15
Add --enable-src configure option
...
When --enable-src is given, the programs in src directory will be
built. If --disable-src is given, those programs will not be built. If
none of them are given, --enable-src is assumed.
2012-09-10 21:51:08 +09:00
b0fcd68783
Move spdycat, spdyd and shrpx from examples to src
...
To distinguish the to-be-installed programs and non-installable
example source code, the former programs, spdycat, spdydyd and shrpx,
were moved to src directory. spdynative was removed from Makefile
because it does not appeal to any users much.
2012-09-10 21:39:51 +09:00
4e5e741907
Add spdylay_npn_get_proto_list() public API function.
...
spdylay_npn_get_proto_list() returns a pointer to the supported SPDY
version list. The element of the list is spdylay_npn_proto struct. It
contains all SPDY version information this library supports. The
application can use this information to configure NPN protocol
offerings/selection.
2012-08-27 23:16:44 +09:00
f8fcee122a
Check that empty name and NULL value are not included in nv
2012-08-21 23:19:15 +09:00
05e6d527b1
Fix compile error on netbsd
...
Include config.h from sources under examples. Added kevent.udata type
check.
2012-07-27 22:11:13 +09:00
5236394c1c
Take into account shut_flags when accepting DATA frame
2012-06-14 22:39:44 +09:00
7b8768bd3a
Fixed compile error with --enable-maintainer-mode
2012-06-11 23:12:23 +09:00
d12217a1c5
Removed redundant CFLAGS
2012-06-11 23:12:02 +09:00
245c7ff1b3
Return nonzero exit status if test fails. Fixed failmalloc tests.
2012-05-31 21:55:21 +09:00
4dd9c32c25
Added SPDYLAY_OPT_MAX_RECV_CTRL_FRAME_BUFFER option.
...
This option sets maximum receive buffer size for incoming control
frame. Basically the library checks the length field of the incoming
control frame. For frames with name/value header block, the library
also checks the length of inflated block is also under the limit. This
is done while incrementally inflating block. If the length of frames
with name/value header block exceeds the limit, the library will issue
RST_STREAM with FRAME_TOO_LARGE. For other frames, it will issue
GOAWAY.
2012-05-25 13:49:18 +09:00
a6ae4fc72c
Incremental name/value block decompression
2012-05-25 10:46:40 +09:00
a18f04e8c7
Fixed buffer overrun in spdylay_pq_push
2012-05-24 21:35:27 +09:00
b95e9a8c4c
Made spdylay_submit_window_update() not be bounded by recv_window_size
...
Current SPDY/3 spec does not clearly prohibit to send
delta_window_size which makes resulting window size more than initial
window size. For this reason, spdylay_submit_window_update() can send
delta_window_size in [1, (1 << 31)-1], inclusive, without bounded by
stream's recv_window_size. Of course, the application is now
responsible to keep the resulting window size <= (1 << 31)-1.
spdylay_submit_window_update() now returns
SPDYLAY_ERR_INVALID_ARGUMENT if delta_window_size is 0 or negative.
2012-05-20 16:09:57 +09:00
e778f268de
Fixed compiler warning with stricter warning options
2012-05-13 17:38:29 +09:00
164312d857
Added test for EOF from recv_callback.
2012-05-12 18:32:37 +09:00
5c187b950f
spdylay_data_source_read_callback can return
...
SPDYLAY_ERR_TEMPORAL_CALLBACK_FAILURE to signal stream error.
2012-05-12 18:19:05 +09:00
9b619e5dd7
Bring back deferred DATA to the outbound queue when SETTINGS with
...
INITIAL_WINDOW_SIZE is received and the window size becomes positive.
2012-05-11 23:01:40 +09:00
1158de22a3
Added status_code argument to spdylay_on_invalid_ctrl_recv_callback
2012-05-09 23:10:52 +09:00
b7429e7c2d
Added spdylay_submit_window_update() public API.
2012-05-08 23:41:59 +09:00
13ea7c60ba
Added spdylay_session_set_option() public API.
2012-05-08 22:59:34 +09:00
02e4440e4a
Having the number of server and client streams be limited separately
...
using SETTINGS_MAX_CONCURRENT_STREAMS
2012-05-08 00:59:26 +09:00
5412ccf129
Renamed spdylay_gzip API. Added test for them.
2012-05-07 22:56:28 +09:00
7b239cc7b0
Packaging fix
2012-04-25 22:27:50 +09:00
c91a4ec091
Added tests for malloc failures
2012-04-24 22:51:06 +09:00
f74bfae451
Merge remote-tracking branch 'original_master/master'
2012-04-11 12:45:46 -07:00
6c32c50e23
Include spdylay_net.h instead of arpa/inet.h
2012-04-06 23:37:25 +09:00
f7d1ca2740
Move timeout checking into the query parameter condition. Copy last_modified date string for file responses.
2012-04-05 11:11:02 -07:00
828b57c937
Merge branch 'master' of github.com:tatsuhiro-t/spdylay
2012-04-06 02:25:49 +09:00
cb7c0ba142
Fixed typo in union selection
2012-04-06 01:50:48 +09:00
d83d1cd33a
Added CREDENTIAL frame support.
2012-04-06 01:45:39 +09:00
310d88c787
Add a timeout parameter to spdycat and add a crazy parameter to spdyd to test it (or test other clients)
2012-04-04 10:19:00 -07:00
93953c102b
Fixed memory leak in unittest
2012-04-04 00:56:21 +09:00
ba56ed6c48
Hide spdylay_data from public API.
...
The spdylay_data contains full of implementation details and is not
used in public API. It should be hidden.
The spdylay_frame union now only contains the control frame.
2012-03-29 23:59:51 +09:00
8251fa1315
Made OpenSSL not mandatory. Don't build examples if OpenSSL is not found.
...
Spdylay library itself does not depend on OpenSSL. The example programs
in examples directory do. Spdylay library should be built without
OpenSSL.
2012-03-29 02:13:33 +09:00
262cda86e8
Issue RST_STREAM with PROTOCOL_ERROR if invalid header block is received.
...
We say the header block is invalid if at least one of the following
condition is true:
There are duplicate header names; or the header names are not
encoded in US-ASCII character set and not lower cased; or the
header name is zero-length string; or the header value contains
multiple in-sequence NUL bytes.
spdylay_frame_unpack_nv() returns SPDYLAY_ERR_INVALID_HEADER_BLOCK
if the unpacking suceeded but it found the header block is invalid.
This means that caller treats it as success, but do additional
processing for invalid header block if it wants.
The functions calling spdylay_frame_unpack_nv() also return
SPDYLAY_ERR_INVALID_HEADER_BLOCK.
2012-03-26 23:19:58 +09:00
e9b56ab1f6
Added @DEFS@ to CPPFLAGS/CFLAGS.
2012-03-24 00:07:56 +09:00
9e716eb635
Code cleanup: C89 and old-style-prototypes and definition.
2012-03-23 02:17:48 +09:00
425a9558d7
Fixed memory leak in unit test
2012-03-17 23:03:11 +09:00
8f038ae4b6
Added spdylay_session_get_outbound_queue_size()
2012-03-15 23:06:28 +09:00
6024106695
Issue stream error with the status code STREAM_IN_USE if multiple SYN_REPLY
...
frames are received for the same active stream ID.
2012-03-11 22:42:22 +09:00
ce6dc1303e
Issue session error with PROTOCOL_ERROR if SYN_STREAM with a stream ID
...
which is less than any previously received SYN_STREAM.
2012-03-11 19:27:33 +09:00
8284746163
spdylay_submit_syn_stream: Return SPDYLAY_ERR_INVALID_ARGUMENT if even
...
Associated-To-Stream-ID is specified.
Check the Associated-To-Stream is active before sending SYN_STREAM.
2012-03-11 18:55:40 +09:00
94c7e89742
Renamed SPDYLAY_CONCURRENT_STREAMS_MAX as
...
SPDYLAY_INITIAL_MAX_CONCURRENT_STREAMS
2012-03-10 18:49:25 +09:00
02924b6dd0
Added spdylay_submit_settings
2012-03-10 18:41:01 +09:00
82e20192d8
Added functions to process received SETTINGS frame.
...
Now remote and local settings are stored separately.
The initial window size is included in SETTINGS frame, all active stream's
window sizes are now updated.
Removed the initial_window_size member from spdylay_stream because
it is the same as remote_settings's initial window size.
2012-03-10 00:10:11 +09:00
6c9e79e8ca
Use SPDY/3 name in spdylay_settings_flag.
...
Added SPDYLAY_SETTINGS_CLIENT_CERTIFICATE_VECTOR_SIZE.
2012-03-09 21:38:05 +09:00
d05d29b507
Added SPDY/3 SETTINGS frame pack/unpack
2012-03-08 23:49:26 +09:00
0a7c510147
Renamed SPDYLAY_ERR_STREAM_ALREADY_CLOSED as SPDYLAY_ERR_STREAM_CLOSED
...
Added doc for spdylay_error values
2012-03-08 00:37:18 +09:00
0e86cec673
Fixed memory leak in unit tests
2012-03-08 00:25:00 +09:00
11020146f5
Added on_ctrl_not_send_callback.
...
This callback function is invoked after the control frame
is not sent because of the error. The error is indicated by
the error argument, which is one of the values defined in spdylay_error.
2012-03-08 00:18:18 +09:00
00abfc8dd3
Always accept SPDY/3 style name/value pairs from spdylay_submit_* and
...
translate them into SPDY/2 as needed.
2012-03-07 00:38:27 +09:00
ac7b87c7a5
Check Return non-zero for failed spdy requests.
2012-03-02 10:59:07 -08:00
8fd2fabef8
Made spdylay_select_next_protocol() return SPDY protocol version if one of
...
SPDY versions is selected.
2012-03-02 22:52:01 +09:00
4e085a21ea
Verify that the expected version of spdy is used.
2012-03-01 12:41:24 -08:00
3b1b4a6ca0
Add a test for spdy version 3.
2012-03-01 12:09:31 -08:00
9c50bd4c29
Add a simple test between spdycat and spdyd.
2012-03-01 12:04:16 -08:00
097f59e3d3
Fix tests build when building outside the source tree.
2012-03-01 11:07:39 -08:00
7bea01d0ce
Fixed use of uninitialized deflater
2012-03-01 22:40:09 +09:00
abfc100edb
Added convenient function spdylay_frame_nv_norm_copy()
2012-02-28 23:38:40 +09:00
e79de111a4
Added spdylay_submit_syn_reply
2012-02-28 23:27:10 +09:00
3d1b411895
Added test for negative window_size case
2012-02-27 23:24:17 +09:00
036efc1018
Separated SPDY2 and SPDY3 tests to ease debugging
2012-02-26 16:33:53 +09:00
d5cc71c636
Added status_code handling to GOAWAY
2012-02-26 16:26:38 +09:00
8693874340
Added SPDY/3 flow control.
2012-02-26 00:12:32 +09:00
4e62c75b02
Added function to pack and unpack WINDOW_UPDATE frame.
2012-02-25 01:47:37 +09:00
847830f132
Added ability to pack/unpack SPDY/3 frames.
...
Added SPDY/3 zlib dictionary from draft-mbelshe-httpbis-spdy-00.
2012-02-25 01:17:03 +09:00
995ccbc8e5
Added version argument to spdylay_frame_*_init. Added version member to
...
spdylay_session.
2012-02-24 23:33:06 +09:00
7652d3f4ca
Added support for 4 bytes length in name/value pair.
2012-02-24 23:05:49 +09:00
cf7da38598
Define flags separately for control and data frames.
2012-02-24 21:40:13 +09:00
769150d5f7
Added spdylay_submit_headers function.
2012-02-24 00:02:29 +09:00
9e9e281bca
Added spdylay_submit_syn_stream function.
2012-02-23 23:20:05 +09:00
9fa8357bbc
Made return value of spdylay_map_init() void. Updated doc.
2012-02-21 23:23:47 +09:00
37944253d2
Ensure read_callback is non-NULL for response bodies.
2012-02-21 22:04:24 +09:00
6e7025b9f5
Test that FLAG_FIN is set if the read callback is NULL.
2012-02-20 13:12:13 -08:00
2edceb1fb1
Fixed compiler warning
2012-02-19 23:49:43 +09:00
54e4c80b96
Added stream_id argument to spdylay_data_source_read_callback
2012-02-19 23:48:39 +09:00
301eb29cd4
Added ability to postpone DATA frames for asynchronous I/O.
2012-02-19 23:42:25 +09:00
4f28698572
Fixed: if bytes of one frame are received in several chunks, unpacking fails.
2012-02-19 00:05:52 +09:00
03307116a2
Send GOAWAY when spdylay_frame_unpack_* is failed with non-fatal error.
...
SPDYLAY_ERR_ZLIB is now moved back to non-fatal error and it is subject
to GOAWAY if it occurred.
2012-02-18 21:55:40 +09:00
122c619260
Fixed spdylay_frame_count_nv_space() bug. Check all data is processed in spdylay_frame_count_unpack_nv_space()
2012-02-18 17:25:13 +09:00
6f30bbbcb5
Fixed test name
2012-02-16 23:47:04 +09:00
6cb4259232
Merge branch 'master' of https://github.com/sorced-jim/spdylay into sorced-jim-master
2012-02-16 23:41:53 +09:00
ac1629e61b
Reuse buffers when unpacking frames.
2012-02-16 22:01:34 +09:00
050f33e8f9
Reuse buffers when packing frames.
...
Temporal name/value buffer will be shared by unpacking frame.
2012-02-16 20:54:30 +09:00
40e8fc960e
Create a test that explicitly checks that a key exists only once in a name/value block.
2012-02-15 12:07:25 -08:00
85ec883d11
Lower-case names in name/value pairs in spdylay_submit_{request, response}
2012-02-15 23:54:42 +09:00
938f51964d
Respond RST_STREAM with PROTOCOL_ERROR when upper cased name is present in nv.
2012-02-15 22:11:42 +09:00
Tatsuhiro Tsujikawa
Jim Morrison