82a43d8035
Optimize opj_dwt_decode_partial_1() when cas == 0
2017-09-01 16:30:54 +02:00
1644665a91
opj_j2k_update_image_data(): avoid zero-ing the buffer if not needed
2017-09-01 16:30:52 +02:00
b2cc8f7f81
Optimize reading/write into sparse array
2017-09-01 16:30:50 +02:00
0ae3cba340
Allow several repeated calls to opj_set_decode_area() and opj_decode() for single-tiled images
...
* Only works for single-tiled images --> will error out cleanly, as currently
in other cases
* Save re-reading the codestream for the tile, and re-use code-blocks of the
previous decoding pass.
* Future improvements might involve improving opj_decompress, and the image writing logic,
to use this strategy.
2017-09-01 16:30:48 +02:00
5d07d463fd
opj_j2k_decode_tiles(): apply whole single tile image decoding optimization to reading at reduced resolution as well
2017-09-01 16:30:45 +02:00
98b9310361
Various changes to allow tile buffers of more than 4giga pixels
...
Untested though, since that means a tile buffer of at least 16 GB. So
there might be places where uint32 overflow on multiplication still occur...
2017-09-01 16:30:44 +02:00
008a12d4fc
TCD: allow tile buffer to be greater than 4GB on 64 bit hosts (but number of pixels must remain under 4 billion)
2017-09-01 16:30:41 +02:00
d1299d9670
Fix compiler warning in release mode
2017-09-01 16:30:39 +02:00
d5153ba404
Remove limitation that prevents from opening images bigger than 4 billion pixels
...
However the intermediate buffer for decoding must still be smaller than 4
billion pixels, so this is useful for decoding at a lower resolution level,
or subtile decoding.
2017-09-01 16:30:37 +02:00
c37e360a51
opj_tcd_init_tile(): fix typo on overflow detection condition (introduced in previous commit)
2017-09-01 16:30:35 +02:00
eee5104a88
opj_dwt_decode_partial_tile(): avoid undefined behaviour in lifting operation by properly initializing working buffer
2017-09-01 16:30:32 +02:00
f9e9942330
Sub-tile decoding: only allocate tile component buffer of the needed dimension
...
Instead of being the full tile size.
* Use a sparse array mechanism to store code-blocks and intermediate stages of
IDWT.
* IDWT, DC level shift and MCT stages are done just on that smaller array.
* Improve copy of tile component array to final image, by saving an intermediate
buffer.
* For full-tile decoding at reduced resolution, only allocate the tile buffer to
the reduced size, instead of the full-resolution size.
2017-09-01 16:30:29 +02:00
aa7198146b
opj_compress: reorder checks related to code block dimensions, to avoid potential int overflow
2017-09-01 10:26:53 +02:00
0a25dceca7
opj_j2k_setup_encoder(): validate code block width/height
2017-09-01 10:26:53 +02:00
84bbb4a874
opj_t1_allocate_buffers(): remove useless overflow checks
2017-09-01 10:26:53 +02:00
6ce49bf5ae
Fix undefined shift behaviour in opj_dwt_is_whole_tile_decoding(). Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3255 . Credit to OSS Fuzz
2017-09-01 10:26:18 +02:00
04b70908a7
Use IDWT whole tile decoding if the area of interest equals to the image bounds, taking into account the reduced resolution factor
2017-08-29 11:40:53 +02:00
a55c024fc6
Subtile decoding: fix overflows in subband coordinate computation that cause later buffer overflow. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3115 . Credit to OSS Fuzz. master only
2017-08-28 17:18:33 +02:00
8f92fc9791
Make opj_set_decode_area() and opj_decode() take into account opj_set_decoded_resolution_factor() ( #1006 , affect API use)
...
* Better document usage of opj_set_decode_area(), ie expecting coordinates
in full resolution/reference grid even if requesting at a lower resolution
factor
* Make sure that image->comps[].factor is set by opj_set_decode_area() and
opj_decode() from the value specified in opj_set_decoded_resolution_factor()
* opj_decompress: add 2 environmenet variables to test alternate ways of
using the API, namely USE_OPJ_SET_DECODED_RESOLUTION_FACTOR=YES to use
opj_set_decoded_resolution_factor() instead of parameters.cp_reduce, and
SKIP_OPJ_SET_DECODE_AREA=YES to not call opj_set_decode_area() if -d is
not specified.
2017-08-28 14:57:49 +02:00
5146abc02e
imagetopgx(): improve performance in 8 bit case (relates to broken.jpc test case)
2017-08-24 14:09:31 +02:00
bc71bd1219
opj_dwt_decode_partial_97(): perf improvement: limit copy of coefficients at end of horizontal pass to actual range of interest
2017-08-23 18:58:32 +02:00
c97666f72b
j2k.c: fix comment, and remove FIXME
2017-08-21 19:02:04 +02:00
24d069e3ff
Add comment
2017-08-21 17:19:13 +02:00
e9bbc6d3dd
Merge pull request #1001 from rouault/subtile_decoding_stage2
...
Subtile decoding: only apply IDWT on areas that participate to the window of interest
2017-08-21 13:02:07 +02:00
17a7ac42d5
Add comments for filter_width values
2017-08-21 12:25:38 +02:00
f87c5ef7eb
Subtile decoding: only do 9x7 IDWT computations on relevant areas of tile-component buffer.
2017-08-20 22:02:41 +02:00
3eed024eb4
pgxtoimage(): avoid excessive memory allocation attempt ( #999 )
2017-08-19 15:45:54 +02:00
5d40325056
Subtile decoding: only do 5x3 IDWT computations on relevant areas of tile-component buffer.
...
This lowers 'bin/opj_decompress -i ../MAPA.jp2 -o out.tif -d 0,0,256,256'
down to 0.860s
2017-08-18 15:08:51 +02:00
e528531922
pgxtoimage(): fix write stack buffer overflow ( #997 )
2017-08-18 13:39:20 +02:00
5597522cac
bmp_read_rle8_data(): avoid potential infinite loop ( #996 )
2017-08-18 10:16:38 +02:00
5d12806091
opj_j2k_update_rates(): grow tile size buffer for some situations
2017-08-17 19:18:48 +02:00
4b0bfbfabc
Zero-initialize tile buffer regions of skipped code-blocks, so as to make Valgrind happy
2017-08-17 19:05:54 +02:00
fe338a057c
Sub-tile decoding: only decode precincts and codeblocks that intersect the window specified in opj_set_decode_area()
2017-08-17 19:05:54 +02:00
17ea17f487
Fix -Wconversion warning
2017-08-17 19:05:29 +02:00
fd8448ed44
bench_dwt.c: fix signedness related warnings
2017-08-17 17:04:48 +02:00
da046b73a8
convert.c: fix recently introduced -Wsign-conversion warnings
2017-08-17 17:02:40 +02:00
9f7d79fd30
opj_getopt_long(): avoid infinite loop on invalid or missing value for an option ( #736 )
2017-08-17 14:52:10 +02:00
2cd30c2b06
tgatoimage(): avoid excessive memory allocation attempt, and fixes unaligned load ( #995 )
2017-08-17 11:47:40 +02:00
09e83407fa
Avoid asserting on assert(i == pcol) in opj_jp2_apply_pclr() by adding new check in opj_jp2_check_color(). Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3068 . Credit to OSS Fuzz
2017-08-17 11:05:53 +02:00
8e6c371e66
opj_t1_encode_cblk(): avoid uint32 overflow when numbps = 0 (which is well defined behaviour, and is properly handled here, but better avoid it to detect real issues)
2017-08-16 18:29:59 +02:00
1e387de742
Fix build issue of JPWL by adding opj_image_data_alloc() and opj_image_data_free() to src/lib/openmj2 ( #994 )
2017-08-16 17:39:20 +02:00
c535531f03
opj_t2_encode_packet(): fix potential write heap buffer overflow ( #992 )
2017-08-16 17:20:29 +02:00
dcac91b8c7
opj_j2k_write_sot(): fix potential write heap buffer overflow ( #991 )
2017-08-16 17:09:10 +02:00
af76000771
tiftoimage(): fix read heap buffer overflow ( #988 )
...
The number of components is given only by TIFFTAG_SAMPLESPERPIXEL / tiSpp.
Querying TIFFTAG_EXTRASAMPLES only give information about which channel is
the alpha channel, but we mostly ignore it for now, so remove that part of the
code.
2017-08-16 13:36:52 +02:00
ab4de904e7
imagetotga(): fix read heap buffer overflow if numcomps < 3 ( #987 )
2017-08-16 13:11:36 +02:00
9624b2fa47
opj_t2_encode_packet(): only emit an error about insufficiently large output buffer in FINAL_PASS mode. Fixes (master-only) regression added in 0b4fef6d19
2017-08-16 12:52:33 +02:00
4241ae6fbb
Fix assertion in debug mode / heap-based buffer overflow in opj_write_bytes_LE for Cinema profiles with numresolutions = 1 ( #985 )
2017-08-15 11:55:58 +02:00
52d5690a6f
Merge pull request #984 from stweil/const
...
Use more const qualifiers
2017-08-14 17:28:26 +02:00
baf0c1ad45
bmp_read_info_header(): reject bmp files with biBitCount == 0 ( #983 )
2017-08-14 17:26:58 +02:00
afb308b9cc
Encoder: grow buffer size in opj_tcd_code_block_enc_allocate_data() to avoid write heap buffer overflow in opj_mqc_flush ( #982 )
2017-08-14 17:20:37 +02:00
bc59410f25
Use const qualifier for mqc_states
...
This allows more compiler optimizations.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2017-08-14 14:41:27 +02:00
10e6ce2c2c
Use const qualifier for j2k_prog_order_list
...
This allows more compiler optimizations.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2017-08-14 14:41:27 +02:00
9f750884f9
Changes in converttif.c for PPC64
2017-08-11 00:06:23 +02:00
a35b489134
Fix argument order in error message of previous commit
2017-08-10 16:58:36 +02:00
0b4fef6d19
Propagate event manager down to opj_t2_encode_packet() and use it to emit an error message when the output buffer is too small
2017-08-10 16:49:47 +02:00
a316f36dfc
Fix crash on encoding if using opj_set_default_encoder_parameters() without defining tcp_numlayers
2017-08-10 14:43:16 +02:00
26fe8f6043
Improve doc of opj_tccp_info_t::cblkw and cblkh
2017-08-10 11:45:49 +02:00
4b16e8d27a
Remove useless opj_tcd_t::enumcs field added per #975
2017-08-09 17:37:05 +02:00
5e200452db
Doc: fix error in previous commit
2017-08-09 15:04:29 +02:00
9203e8ec51
tcd.h: doc fixes and improvements
2017-08-09 14:50:59 +02:00
11b1ffb373
Document qmfbid values
2017-08-09 14:13:58 +02:00
ac375ac9f5
Partial revert BPC related check of #975 ( #979 )
...
PR #975 introduced a check that rejects images that have different bit depth/sign
per compoment in SIZ marker if the JP2 IHDR box has BPC != 255
This didn't work properly if decoding a .j2k file since the new bit added in
opj_cp_t wasn't initialized to the right value.
For clarity, tThis new bit has also been renamed to allow_different_bit_depth_sign
But looking closer at the code, it seems we were already tolerant to inconsistencies.
For example we parsed a JP2 BPCC box even if BPC != 255 (just a warning is emitted)
So failing hard in opj_j2k_read_siz() wouldn't be very inconsistent, and that
alone cannot protect against other issues, so just emit a warning if BPC != 255
and the SIZ marker contains different bit depth/sign per component.
Note: we could also check that the content of JP2 BPCC box is consistant with the one
of the SIZ marker.
2017-08-09 11:34:08 +02:00
c38bdbef4f
opj_decompress: document -quiet option, and remove spurious newline output
2017-08-09 10:03:59 +02:00
0eceb4494c
src/bin/jpwl/convert.c pgxtoimage(): add missing fclose() ( #977 )
2017-08-09 09:50:39 +02:00
5a560ebf51
imagetobmp: avoid shift by -1 (relates to #811 )
2017-08-09 09:42:30 +02:00
0c07950cb3
Fix remaining warning
...
format specifier mismatch in #975
2017-08-08 18:05:37 -07:00
0394f8d0f1
Merge pull request #975 from szukw000/changes-for-afl-tests
...
Catch images broken by AFL
2017-08-08 16:51:54 -07:00
92114694a4
Slight improvement in management of code block chunks
...
Instead of having the chunk array at the segment level, we can move it down to
the codeblock itself since segments are filled in sequential order.
Limit the number of memory allocation, and decrease slightly the memory usage.
On MAPA_005.jp2
n4: 1871312549 (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
n1: 1610689344 0x4E781E7: opj_aligned_malloc (opj_malloc.c:61)
n1: 1610689344 0x4E71D1B: opj_alloc_tile_component_data (tcd.c:676)
n1: 1610689344 0x4E726CF: opj_tcd_init_decode_tile (tcd.c:816)
n1: 1610689344 0x4E4BE39: opj_j2k_read_tile_header (j2k.c:8617)
n1: 1610689344 0x4E4C902: opj_j2k_decode_tiles (j2k.c:10348)
n1: 1610689344 0x4E4E3CE: opj_j2k_decode (j2k.c:7846)
n1: 1610689344 0x4E53002: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40374E: main (opj_decompress.c:1459)
n1: 219232541 0x4E4BC50: opj_j2k_read_tile_header (j2k.c:4683)
n1: 219232541 0x4E4C902: opj_j2k_decode_tiles (j2k.c:10348)
n1: 219232541 0x4E4E3CE: opj_j2k_decode (j2k.c:7846)
n1: 219232541 0x4E53002: opj_jp2_decode (jp2.c:1564)
n0: 219232541 0x40374E: main (opj_decompress.c:1459)
n1: 23893200 0x4E72735: opj_tcd_init_decode_tile (tcd.c:1225)
n1: 23893200 0x4E4BE39: opj_j2k_read_tile_header (j2k.c:8617)
n1: 23893200 0x4E4C902: opj_j2k_decode_tiles (j2k.c:10348)
n1: 23893200 0x4E4E3CE: opj_j2k_decode (j2k.c:7846)
n1: 23893200 0x4E53002: opj_jp2_decode (jp2.c:1564)
n0: 23893200 0x40374E: main (opj_decompress.c:1459)
n0: 17497464 in 52 places, all below massif's threshold (1.00%)
2017-08-07 18:32:52 +02:00
ca34d13e76
Decoding: do not allocate memory for the codestream of each codeblock
...
Currently we allocate at least 8192 bytes for each codeblock, and copy
the relevant parts of the codestream in that per-codeblock buffer as we
decode packets.
As the whole codestream for the tile is ingested in memory and alive
during the decoding, we can directly point to it instead of copying. But
to do that, we need an intermediate concept, a 'chunk' of code-stream segment,
given that segments may be made of data at different places in the code-stream
when quality layers are used.
With that change, the decoding of MAPA_005.jp2 goes down from the previous
improvement of 2.7 GB down to 1.9 GB.
New profile:
n4: 1885648469 (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
n1: 1610689344 0x4E78287: opj_aligned_malloc (opj_malloc.c:61)
n1: 1610689344 0x4E71D7B: opj_alloc_tile_component_data (tcd.c:676)
n1: 1610689344 0x4E7272C: opj_tcd_init_decode_tile (tcd.c:816)
n1: 1610689344 0x4E4BDD9: opj_j2k_read_tile_header (j2k.c:8618)
n1: 1610689344 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 1610689344 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 1610689344 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40374E: main (opj_decompress.c:1459)
n1: 219232541 0x4E4BBF0: opj_j2k_read_tile_header (j2k.c:4685)
n1: 219232541 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 219232541 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 219232541 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 219232541 0x40374E: main (opj_decompress.c:1459)
n1: 39822000 0x4E727A9: opj_tcd_init_decode_tile (tcd.c:1219)
n1: 39822000 0x4E4BDD9: opj_j2k_read_tile_header (j2k.c:8618)
n1: 39822000 0x4E4C8A2: opj_j2k_decode_tiles (j2k.c:10349)
n1: 39822000 0x4E4E36E: opj_j2k_decode (j2k.c:7847)
n1: 39822000 0x4E52FA2: opj_jp2_decode (jp2.c:1564)
n0: 39822000 0x40374E: main (opj_decompress.c:1459)
n0: 15904584 in 52 places, all below massif's threshold (1.00%)
2017-08-07 18:32:52 +02:00
373520db30
Add documentation for magic values in the code
2017-08-07 18:32:52 +02:00
434ace4ff7
opj_jp2_apply_pclr() also needs to use opj_image_data_alloc/opj_image_data_free
2017-08-07 18:32:52 +02:00
0c1fc0593e
Complementary fix to previous commit
2017-08-07 18:32:52 +02:00
f58aab9d6a
Add opj_image_data_alloc() / opj_image_data_free()
...
As bin/common/color.c used to directly call malloc()/free(), we need
to export functions dedicated to allocating/freeing image component data.
2017-08-07 18:32:52 +02:00
61fb5dd7f8
Fix crash on Windows due to b7594c0fcb9dd3aa6356d72c4a525d76168da689
...
b7594c0fcb9dd3aa6356d72c4a525d76168da689 may put opj_tcd_tilecomp_t->data
allocated by opj_alloc_tile_component_data() as the image->comps[].data. As
opj_alloc_tile_component_data() use opj_aligned_malloc() we must be sure to
ue opj_alined_malloc()/_free() in all places where we alloc/free
image->comps[].data.
Note: this might have some compatibility impact in case user code does itself
the allocation/free of image->comps[].data
2017-08-07 18:32:49 +02:00
793edc38e4
Decrease memory consumption for whole image single tile decoding.
...
We can use the same buffer for the tile decoding and the final image, and
save the intermediate buffer to transfer between those.
Effect on the decoding of MAPA (9944 x 13498 x 3 components of size byte)
Peak memory from 4.5 GB to 2.7 GB
Now:
n5: 2699708767 (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
n1: 1610689344 0x4E77E07: opj_aligned_malloc (opj_malloc.c:61) <-- final image
n1: 1610689344 0x4E7195B: opj_alloc_tile_component_data (tcd.c:676)
n1: 1610689344 0x4E722D2: opj_tcd_init_decode_tile (tcd.c:816)
n1: 1610689344 0x4E4BCF1: opj_j2k_read_tile_header (j2k.c:8597)
n1: 1610689344 0x4E4C742: opj_j2k_decode_tiles (j2k.c:10324)
n1: 1610689344 0x4E4E20E: opj_j2k_decode (j2k.c:7826)
n1: 1610689344 0x4E52E42: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40369E: main (opj_decompress.c:1459)
n1: 815554560 0x4E72231: opj_tcd_init_decode_tile (tcd.c:1217) <-- working memory for code blocks: 9944*13498/64/64*8192*3
n1: 815554560 0x4E4BCF1: opj_j2k_read_tile_header (j2k.c:8597)
n1: 815554560 0x4E4C742: opj_j2k_decode_tiles (j2k.c:10324)
n1: 815554560 0x4E4E20E: opj_j2k_decode (j2k.c:7826)
n1: 815554560 0x4E52E42: opj_jp2_decode (jp2.c:1564)
n0: 815554560 0x40369E: main (opj_decompress.c:1459)
n1: 219758391 0x4E4C0BF: opj_j2k_read_tile_header (j2k.c:4661) <-- ingestion of code stream
n1: 219758391 0x4E4C742: opj_j2k_decode_tiles (j2k.c:10324)
n1: 219758391 0x4E4E20E: opj_j2k_decode (j2k.c:7826)
n1: 219758391 0x4E52E42: opj_jp2_decode (jp2.c:1564)
n0: 219758391 0x40369E: main (opj_decompress.c:1459)
n1: 39822000 0x4E7224F: opj_tcd_init_decode_tile (tcd.c:1224) <-- OPJ_J2K_DEFAULT_NB_SEGS*sizeof(opj_tcd_seg_t) per codeblock
n1: 39822000 0x4E4BCF1: opj_j2k_read_tile_header (j2k.c:8597)
n1: 39822000 0x4E4C742: opj_j2k_decode_tiles (j2k.c:10324)
n1: 39822000 0x4E4E20E: opj_j2k_decode (j2k.c:7826)
n1: 39822000 0x4E52E42: opj_jp2_decode (jp2.c:1564)
n0: 39822000 0x40369E: main (opj_decompress.c:1459)
n0: 13884472 in 49 places, all below massif's threshold (1.00%)
Before:
n5: 4493329848 (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
n2: 1610709160 0x4E77C87: opj_aligned_malloc (opj_malloc.c:61)
n1: 1610689344 0x4E717DB: opj_alloc_tile_component_data (tcd.c:676)
n1: 1610689344 0x4E72152: opj_tcd_init_decode_tile (tcd.c:816)
n1: 1610689344 0x4E4BCF1: opj_j2k_read_tile_header (j2k.c:8597)
n1: 1610689344 0x4E4C64A: opj_j2k_decode_tiles (j2k.c:10318)
n1: 1610689344 0x4E4E08E: opj_j2k_decode (j2k.c:7826)
n1: 1610689344 0x4E52CC2: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40369E: main (opj_decompress.c:1459)
n0: 19816 in 2 places, all below massif's threshold (1.00%)
n1: 1610689344 0x4E43F36: opj_j2k_update_image_data.isra.7 (j2k.c:8743)
n1: 1610689344 0x4E4C5C1: opj_j2k_decode_tiles (j2k.c:10358)
n1: 1610689344 0x4E4E08E: opj_j2k_decode (j2k.c:7826)
n1: 1610689344 0x4E52CC2: opj_jp2_decode (jp2.c:1564)
n0: 1610689344 0x40369E: main (opj_decompress.c:1459)
n1: 815554560 0x4E720B1: opj_tcd_init_decode_tile (tcd.c:1217)
n1: 815554560 0x4E4BCF1: opj_j2k_read_tile_header (j2k.c:8597)
n1: 815554560 0x4E4C64A: opj_j2k_decode_tiles (j2k.c:10318)
n1: 815554560 0x4E4E08E: opj_j2k_decode (j2k.c:7826)
n1: 815554560 0x4E52CC2: opj_jp2_decode (jp2.c:1564)
n0: 815554560 0x40369E: main (opj_decompress.c:1459)
n1: 402672336 0x4E4C545: opj_j2k_decode_tiles (j2k.c:10336)
n1: 402672336 0x4E4E08E: opj_j2k_decode (j2k.c:7826)
n1: 402672336 0x4E52CC2: opj_jp2_decode (jp2.c:1564)
n0: 402672336 0x40369E: main (opj_decompress.c:1459)
n0: 53704448 in 58 places, all below massif's threshold (1.00%)
2017-08-07 18:18:53 +02:00
bc3cb74100
Changes for converttif.c to fix tsize_t
2017-08-07 16:44:28 +02:00
2fbd4bb0b9
opj_j2k_read_sot(): check current TPSot number regarding previous (non-zero) TNsot to avoid opj_j2k_merge_ppt() to be called several times. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2851 . Credit to OSS Fuzz
2017-08-04 18:02:10 +02:00
57e36dbfeb
First change on changes-for-afl-tests
2017-08-02 17:27:08 +02:00
48125b0d12
src/bin/jpwl/convert.c: add missing fclose() in error code path (suggested by maddin200, #976 )
2017-07-31 17:35:10 +02:00
00f45684a8
Catch images broken by AFL
2017-07-31 13:58:08 +02:00
13cde9fa37
src/lib/openjp2/*.h: use OPJ_ prefix for inclusion guards instead of reserved __ ( #587 )
2017-07-30 19:46:52 +02:00
9a6d41d22b
opj_event_msg(): force zero termination of buffer
2017-07-30 19:27:01 +02:00
b716f86163
Fix breakage of 22bf99ce02
2017-07-30 19:26:47 +02:00
22bf99ce02
Test return value of opj_j2k_setup_decoding_tile() (commit ec31fa0c7f by ak-dxdy, #561 )
2017-07-30 19:07:16 +02:00
ffa9a4f658
Fix warnings in USE_JPIP compilation mode
2017-07-30 18:46:34 +02:00
c22cbd8bdf
Avoid heap buffer overflow in function pnmtoimage of convert.c, and unsigned integer overflow in opj_image_create() (CVE-2016-9118, #861 )
2017-07-30 18:43:25 +02:00
83342f2aaf
Fix Doxygen warnings (patch derived from Winfried's doxygen-dif.txt.zip, #849 )
2017-07-30 18:18:59 +02:00
4748318136
j2k.c: remove hardcoded constants related to m_state, and useless FIXME
2017-07-30 17:26:03 +02:00
e23e0c94d0
Avoid p_stream->m_user_data_length >= (OPJ_UINT64)p_stream->m_byte_offset assertion in opj_stream_get_number_byte_left(). Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2786 . Credit to OSS Fuzz
2017-07-30 16:48:15 +02:00
1ed8d67797
opj_j2k_set_decode_area: replace assertions by runtime checks. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2795 . Credit to OSS Fuzz
2017-07-30 15:35:47 +02:00
68832af20e
opj_tcd_dc_level_shift_decode: avoid int32 overflow when prec == 31. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2799 . Credit to OSS Fuzz
2017-07-30 15:22:24 +02:00
517bf6fd86
src/bin/jpwl/convert.c: fix memleak (fix suggested by maddin200, #631 )
2017-07-29 21:11:23 +02:00
51eb86d8f7
Fix warnings in pi.c raised by VS11 analyze ( #190 )
2017-07-29 19:43:23 +02:00
397f62c0a8
Fix write heap buffer overflow in opj_mqc_byteout(). Discovered by Ke Liu of Tencent's Xuanwu LAB ( #835 )
2017-07-29 19:13:49 +02:00
11445eddad
opj_pi_update_decode_poc(): limit layno1 to the number of layers (CVE-2016-1626 and CVE-2016-1628, #850 )
...
This has been recently fixed in a less elegant way per
80818c39f5
2017-07-29 19:03:13 +02:00
3fbe713690
opj_tcd_get_decoded_tile_size(): fix potential UINT32 overflow ( #854 , CVE-2016-5152)
...
Fix derived from https://pdfium.googlesource.com/pdfium.git/+/d8cc503575463ff3d81b22dad292665f2c88911e/third_party/libopenjpeg20/0018-tcd_get_decoded_tile_size.patch
2017-07-29 18:38:16 +02:00
5a3e7aaf33
color_cielab_to_rgb(): reject images with components of different dimensions to void read heap buffer overflow ( #909 )
2017-07-29 17:56:12 +02:00
784d4d47e9
Fix breakage of 2fa0fc61f2 ( #970 )
2017-07-29 17:51:10 +02:00
2fa0fc61f2
imagetopnm(): make sure the alpha component has same dimension as other components to avoid read heap buffer overflow ( #970 )
2017-07-29 17:28:55 +02:00
db9ef99f6d
opj_t1_decode_cblk(): avoid undefined shift behaviour. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2487 . Credit to OSS Fuzz
2017-07-29 16:34:35 +02:00
f6551f822f
opj_t1_clbl_decode_processor(): avoid undefined behaviour if roishift >= 31. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2506 . Credit to OSS Fuzz
2017-07-29 16:29:11 +02:00
9906fbf737
Avoid assertion in opj_j2k_merge_ppt() in case premature EOC is encountered in opj_j2k_read_tile_header(). Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2785 . Credit to OSS Fuzz
2017-07-29 16:22:36 +02:00
71b4f5b124
opj_pi_next_pcrl(): avoid undefined shift behaviour. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2787 . Credit to OSS Fuzz
2017-07-29 15:52:11 +02:00
d6654d906c
opj_int_ceildiv(): fix int32 overflow. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2494 . Credit to OSS Fuzz
2017-07-28 22:15:47 +02:00
361c4506fd
opj_tcd_dc_level_shift_decode(): avoid int overflow. Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2516 . Credit to OSS Fuzz
2017-07-28 22:06:26 +02:00
7bdbe490cb
Fix null pointer dereference in opj_jp2_apply_pclr(). Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2558 . Credit to OSS Fuzz
2017-07-28 21:55:22 +02:00
16aeb9282f
Fix null pointer dereference in opj_j2k_add_mct() ( #895 )
...
Fixes openjeg-crashes-2017-07-27/issue879-poc1.j2k of #895
2017-07-28 21:39:30 +02:00
c5bf5ef4d6
Avoid use-after-free when a MCT marker is found after a MCC one ( #895 )
...
Fixes openjeg-crashes-2017-07-27/issue880-poc2.j2k of #895
2017-07-28 21:29:55 +02:00
e03e947466
Avoid undefined shift behaviour if bit depth == 32 ( #895 )
...
Fixes openjeg-crashes-2017-07-27/id:000000,sig:11,src:003798,op:ext_AO,pos:128.jp2
2017-07-27 22:29:17 +02:00
820fcfe8bb
opj_j2k_update_image_data / opj_tcd_update_tile_data: fix unaligned load/store ( #895 )
...
When components don't have the same width, unaligned load/store are possible.
Fixes openjeg-crashes-2017-07-27/id:000000,sig:11,src:001342,op:flip4,pos:162.jp2 of #895
2017-07-27 19:35:35 +02:00
6c4e5bacb9
opj_pi_next_rpcl / opj_pi_next_pcrl / opj_pi_next_cprl: avoid int overflow ( #895 )
...
Fixes int overflow on openjeg-crashes-2017-07-27/id:000000,sig:08,src:000879,op:flip2,pos:128.jp2
2017-07-27 19:22:14 +02:00
178194c093
opj_jp2_check_color(): replace assertion regarding mtyp by runtime check ( #672 , #895 )
...
Fixes test case openjeg-crashes-2017-07-27/id:000000,sig:06,src:000001,op:flip1,pos:808.jp2
of #895
2017-07-27 18:52:35 +02:00
d6fa300997
Avoids undefined shift behaviour in m_dc_level_shift computation
...
Fixes warning found on clusterfuzz-testcase-minimized-5146316340461568
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2495
Credit to OSS Fuzz
2017-07-27 18:10:03 +02:00
a88cbb6a0b
Fix various undefined shift behaviour in pi.c
...
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2496
Credit to OSS Fuzz
2017-07-26 22:53:59 +02:00
6c5fe9407b
Avoid potential undefined shift behaviour in opj_bio_read() from opj_t2_read_packet_header()
...
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2485
Credit to OSS Fuzz
2017-07-26 22:22:44 +02:00
94c4b7300c
T1 decoder: check code stream errors when predictable termination is enabled and emit a warning when errors are found
2017-07-26 21:43:32 +02:00
5e795d90a1
Spelling fixes (patch by ka7, #890 , rebased on top of master)
2017-07-26 21:06:38 +02:00
2be20ce7d9
Reformat src/bin/wx/OPJViewer/source/OPJThreads.cpp src/bin/wx/OPJViewer/source/imagjpeg2000.cpp wrapping/java/openjp2/JavaOpenJPEG.c
2017-07-26 21:04:01 +02:00
94cc97c58a
opj_decompress: fix null pointer dereference on comps[].data on id_000167,sig_11,src_006079,op_havoc,rep_4 ( #939 )
2017-07-26 20:13:09 +02:00
8d2e69e37d
Fix assertion / memory leak in opj_j2k_merge_ppt() on corrupted images ( #939 )
...
Fixes issue on id:000020,sig:06,src:001958,op:flip4,pos:149 that has two
SOT markers for the same tile with the same tile part number, causing
opj_j2k_merge_ppt() to be called several times.
2017-07-26 19:49:38 +02:00
5c5319984b
Avoid division by zero in opj_pi_next_rpcl, opj_pi_next_pcrl, opj_pi_next_cprl ( #938 )
...
Fixes crash on id_000004,sig_06,src_000679,op_arith8,pos_49,val_-17
2017-07-26 18:05:56 +02:00
80818c39f5
Avoid index out of bounds access to pi->include[] ( #938 )
...
Fix id:000098,sig:11,src:005411,op:havoc,rep:2 test case
2017-07-26 12:50:51 +02:00
d27ccf01c6
Avoid division by zero in opj_pi_next_rpcl, opj_pi_next_pcrl and opj_pi_next_cprl ( #938 )
...
Fixes issues with id:000026,sig:08,src:002419,op:int32,pos:60,val:+32 and
id:000019,sig:08,src:001098,op:flip1,pos:49
2017-07-26 11:32:41 +02:00
90ced71601
install static libraries
2017-07-13 11:34:15 +02:00
60f8ddf577
Comment fix
2017-07-06 12:11:37 +02:00
a38c4496b6
Remove unused m_DA_x0, m_DA_y0, m_DA_x1, m_DA_y1 members from opj_j2k_dec structure
2017-07-05 21:33:42 +02:00
c308de39ed
opj_j2k_read_header_procedure(): validate marker size to avoid excessive memory allocation attempt
2017-07-03 14:33:57 +02:00
5736b1a368
Merge pull request #954 from jeroen/static
...
build both shared and static library
2017-07-03 12:03:29 +02:00
8fa405ee15
IDWT 5x3: fix bug in AVX2 implementation ( #953 , #957 )
2017-06-30 00:03:05 +02:00
533fa2fdee
Merge pull request #957 from rouault/idwt_53_improvements
...
IDWT 5x3 single-pass lifting and SSE2/AVX2 implementation
2017-06-26 12:45:34 +02:00
6026786069
Style fix
2017-06-21 13:20:35 +02:00
93aca84731
Fix mingw related warnings
2017-06-21 12:54:40 +02:00
cdd3e83bae
Fix clang warning about extraneous parentheses
2017-06-21 12:49:01 +02:00
fd0dc535ad
IDWT 5x3: generalize SSE2 version for AVX2
...
Thanks to our macros that abstract SSE use, the functions can use
AVX2 when available (at compile time)
This brings an extra 23% speed improvement on bench_dwt in 64bit builds
with AVX2 compared to SSE2.
2017-06-21 12:12:58 +02:00
f6e3475cc9
dwt.c: small cleanup
2017-06-21 01:07:56 +02:00
f06cfadef8
Enable __SSE__ / __SSE2__ with Visual Studio
2017-06-20 18:24:21 +02:00
fa55b52d19
Improve performance of inverse DWT 5x3 ( #953 )
...
* Use single-pass lifting inverse wavelet transform.
* For vertical pass, use SSE2 when available so as to process 8 columns
in parallel. This is the most beneficial improvement, since the
vertical pass involves a lot of cache trashing.
With the bench_dwt utility with default arguments (16383x16383 image),
time goes from 4.064 s to 1.212 s.
2017-06-20 18:01:34 +02:00
919ed5f8b8
Add bench_dwt program (compiled only if BUILD_BENCH_DWT=ON)
2017-06-20 17:56:19 +02:00
8df2521a60
Remove OPJ_NOSANITIZE in opj_bio_read() and opj_bio_write() ( #761 )
...
Commit 29313eb5
2017-06-17 19:15:00 +02:00
32b20b93e0
Fix astyle issue
2017-06-17 16:37:56 +02:00
5f596cb283
Fix warning about unused arguments
2017-06-17 14:10:15 +02:00
cc07aec6c7
Fix warnings with recent GCC versions
2017-06-17 14:09:31 +02:00
a0839cca24
only build both static and dynamic on non-windows
2017-06-16 13:58:25 +02:00
1329b3240a
build both shared and static library
2017-06-16 13:27:19 +02:00
36dd87cea8
Merge pull request #928 from RussellMcOrmond/master
...
Quiet mode for opj_decompress via -quiet long parameter.
2017-06-14 17:23:06 +02:00
9cbc9903c3
Merge branch 't1_flag_optimizations'
2017-06-13 12:09:52 +02:00
2609fb8077
Packet header writing: set empty packet header bit to 0 when appropriate (small optimization)
2017-06-12 18:38:11 +02:00
73d1510d47
Encoder: fix packet writing of empty sub-bands ( #891 , #892 )
...
There are situations where, given a tile size, at a resolution level,
there are sub-bands with x0==x1 or y0==y1, that consequently don't have any
valid codeblocks, but the other sub-bands may be non-empty.
Given that we recycle the memory from one tile to another one, those
ghost codeblocks might be non-0 and thus candidate for packet inclusion.
2017-06-12 18:37:50 +02:00
81c5311758
T1: fix BYPASS/LAZY, TERMALL/RESTART and PTERM/ERTERM encoding modes. ( #674 )
...
There were a number of defects regarding when and how the termination of
passes had to done and the computation of their rate.
2017-06-09 10:49:03 +02:00
9a9b06911e
opj_t1_dec_sigpass_raw/opj_t1_dec_refpass_raw: harmonize style with mqc methods
2017-06-02 19:22:15 +02:00
532243f1fd
MQC/RAW decoder: use an artificial 0xFF 0xFF terminating marker.
...
This saves comparing the current pointer with the end of buffer pointer.
This results at least in tiny speed improvement for raw decoding, and
smaller code size for MQC as well.
This kills the remains of the raw.h/.c files that were only used for
decoding. Encoding using the mqc structure already.
2017-06-02 18:24:07 +02:00
9b39fc4bcc
Fix documentation of opj_t1_decode_cblks()
2017-06-02 18:23:49 +02:00
dde6cbabc0
Simplify VSC handling: instead of masking out bits when reading the 4th row.
...
Do not set them when updating flags of the 1st row
2017-06-02 18:23:38 +02:00
3d9940a35b
Force inlining of mqc decoding and pass steps through heavy use of macros, so as to get better register allocation
2017-06-02 18:23:20 +02:00
7e8b502842
t1_generate_luts.c: fix compiler warnings
2017-06-02 18:22:59 +02:00
2ba861c37c
Optimize opj_t1_update_flags()
2017-06-02 18:22:42 +02:00
a0861855c1
T1: remove use of neghalf variable. It is useless since bpno is always > 0
2017-06-02 18:22:21 +02:00
10410fe72e
T1: avoid pointer indirection for mqc and raw members of opj_t1_t
2017-06-02 18:21:54 +02:00
a5003787ff
T1: remove flags_stride variable from opj_t1_t
2017-06-02 18:21:39 +02:00
0ec842e1f1
Inline opj_raw_decode()
2017-06-02 18:21:21 +02:00
aa7a8a4398
T1: loop unrolling in dec_sigpass_raw and dec_refpass_raw
2017-06-02 18:20:58 +02:00
68557ff503
T1: Transpose coder optimizations to decoder, and cleanup code
2017-06-02 18:20:35 +02:00
1957a498b6
Fix compiler warnings
2017-05-23 17:06:46 +02:00
40c0f42def
Factor index computation for lut_enc_ctxno_sc and lut_enc_spb
2017-05-23 17:06:46 +02:00
d6907b9304
Optimize a bit opj_t1_enc_clnpass()
2017-05-23 17:06:46 +02:00
c76a592131
T1: remove unused code in decoder
2017-05-23 17:06:46 +02:00
4068363ff5
T1: fix VSC mode in encoder
2017-05-23 16:16:32 +02:00
cd12414c6b
T1: use more compact flags to optimize cache usage in encoder passes. ( #172 )
...
Ported from Carl Hetherington work (actually through Matthieu Darbois's port
on top of OpenJPEG 2.1.0)
Can reduce total encoding time by 10-15%
WARNING: VSC mode is not implemented, and so is a temporary regression
that must be fixed.
2017-05-23 16:16:32 +02:00
a8ca7c51f3
CMake: add stronger warnings for openjp2 lib/bin by default, and error out on declaration-after-statement
...
And remove occurences of unused arguments in src/lib/openjp2
2017-05-23 15:47:57 +02:00
8728cfbc79
t1.c: fix compiler warnings
2017-05-23 13:54:28 +02:00
5f1e380b51
Fixed formatting issues ASTYLE
2017-05-16 09:31:07 -04:00
9d8e1ecdeb
Quiet mode for opj_decompress via -quiet long parameter.
2017-05-15 14:39:54 -04:00
83d7a6d4a4
MQC: remove disabled MQC_PERF_OPT mode, which brings no performance improvements (see #923 )
2017-05-15 14:11:47 +02:00
4431fa7265
Add comments about non successfull attempt of implementing alternate INITDEC, DECODE and BYTEIN procedures (refs #921 )
2017-05-15 14:09:51 +02:00
3c2972f924
Reformat: apply reformattin on .h files ( #128 )
2017-05-15 12:21:30 +02:00
563bd8499e
Reformat whole codebase with astyle.options ( #128 )
2017-05-09 20:46:20 +02:00
a43f1bea62
Remove warnings related to empty tag-trees.
...
Decoding some valid .jp2 files like Sentinel2 datasets leads to warnings like:
No incltree created.
tgt_create tree->numnodes == 0, no tree created.
No imsbtree created.
tgt_create tree->numnodes == 0, no tree created.
Besides that, the image is correctly decoded. So there is no reason to emit
those warnings.
2017-02-13 12:36:45 +01:00
34dae137a9
OPENJPEG_NAMESPACE is configurable by user
2016-09-26 12:01:31 +02:00
4d5c5e7c48
Remove typos from comments and man pages
2016-09-26 11:26:55 +02:00
fac916f72a
Fix PNM file reading ( #847 )
...
Malformed PNM file could cause a crash in opj_compress.
Checks were added to prevent this.
Fixes #843
Updates #440
2016-09-22 00:30:34 +02:00
8715ce2749
Fix some issues reported by Coverity Scan ( #846 )
...
* test_tile_decoder: Fix potential buffer overflow (coverity)
CID 1190155 (#1 of 1): Unbounded source buffer (STRING_SIZE)
Using a pointer instead of buffer of fixed size avoids the limit
for the length of the input file name.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* test_tile_encoder: Fix potential buffer overflow (coverity)
CID 1190154 (#1 of 1): Unbounded source buffer (STRING_SIZE)
Using a pointer instead of buffer of fixed size avoids the limit
for the length of the output file name. This implies that the length
can exceed 255, so the data type for variable len had to be fixed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* openjpip: Initialize data before returning it
This fixes an error reported by Coverity:
CID 1190143 (#1 of 1): Uninitialized scalar variable (UNINIT)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-09-21 21:15:25 +02:00
045aa4d9f2
Fix potential out-of-bounds read (coverity) ( #844 )
...
* query_parser: Fix potential out-of-bounds read (coverity)
CID 1190207 (#1 of 1): Out-of-bounds read (OVERRUN)
Variable i must be checked before testing query_param.box_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
* jpip_parser: Fix potential out-of-bounds read (coverity)
CID 1190206 (#1 of 1): Out-of-bounds read (OVERRUN)
Variable i must be checked before testing query_param.box_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-09-21 13:17:09 +02:00
da94042481
Merge pull request #834 from trylab/issue833
...
Fix issue 833.
2016-09-20 18:59:30 +02:00
31d44f0280
Disable automatic compilation of t1_generate_luts
...
Fix #831
2016-09-20 18:48:06 +02:00
3aaeea7ce8
renamed USE_THREAD to OPJ_USE_THREAD
...
renaming to be consistent with previous OPJ CMake options
2016-09-16 17:54:12 +02:00
6e7616c83c
Remove TODO for overflow check ( #842 )
...
The check was already done. It’s been simplified.
Reformat to get consistent style throughout the functions.
2016-09-15 23:51:34 +02:00
9a07ccb3d0
Add overflow checks for opj_aligned_malloc ( #841 )
...
See
https://pdfium.googlesource.com/pdfium/+/b20ab6c7acb3be1393461eb650ca8fa4660c937e/third_party/libopenjpeg20/0020-opj_aligned_malloc.patch
2016-09-15 01:57:53 +02:00
f88c9974e2
Flags in T1 shall be unsigned ( #840 )
...
This will remove some conversion warnings
2016-09-14 23:46:46 +02:00
0954bc11e3
Fix some warnings ( #838 )
...
Fix warnings introduced by uclouvain/openjpeg#786
2016-09-14 00:12:43 +02:00
f66e120452
Merge branch 'bit-fields-type' of https://github.com/smuehlst/openjpeg into smuehlst-bit-fields-type
2016-09-13 21:21:11 +02:00
d6d0f070e1
Merge pull request #786 from rouault/tier1_optimizations_multithreading
...
T1 & DWT multithreading decoding optimizations
2016-09-13 16:39:26 +02:00
893143c8e1
Fix issue 833.
...
Add some overflow check operations.
2016-09-13 17:43:30 +08:00
b21a8317e5
Fix coverity 113065 (CWE-484) ( #824 )
2016-09-08 22:14:19 +02:00
48c16b2c19
Merge branch 'master' of https://github.com/uclouvain/openjpeg into tier1_optimizations_multithreading_2
...
Conflicts:
src/lib/openjp2/t1.c
2016-09-08 10:30:09 +02:00
ab22c5bad5
opj_thread_pool: fix potential deadlock at thread pool destruction
2016-09-08 09:43:36 +02:00
ef01f18dfc
Cast to size_t before multiplication
...
Need to cast to size_t before multiplication otherwise overflow check is useless.
2016-09-08 07:34:46 +02:00
e078172b1c
Add sanity check for tile coordinates ( #823 )
...
Coordinates are casted from OPJ_UINT32 to OPJ_INT32
Add sanity check for negative values and upper bound becoming lower
than lower bound.
See also
https://pdfium.googlesource.com/pdfium/+/b6befb2ed2485a3805cddea86dc7574510178ea9
2016-09-08 00:24:15 +02:00
8750e183c6
Moved type OPJ_BITFIELD from openjpeg.h to opj_includes.h
...
OPJ_BITFIELD is used only in internal headers and must not
appear in the public openjpeg.h header.
2016-09-07 08:41:01 +02:00
6c83f1468c
Merge branch 'master' into bit-fields-type
2016-09-07 08:35:19 +02:00
734d57d5f7
fix incrementing of "l_tcp->m_nb_mcc_records" in opj_j2k_read_mcc ( #820 )
2016-09-06 22:33:26 +02:00
c16bc057ba
Fix an integer overflow issue ( #809 )
...
Prevent an integer overflow issue in function opj_pi_create_decode of
pi.c.
2016-09-06 07:55:49 +02:00
ea320dab8b
Add overflow check in opj_tcd_init_tile ( #819 )
2016-09-06 07:54:29 +02:00
d7e6b7de8a
Fix leak & invalid behavior of opj_jp2_read_ihdr ( #818 )
...
In case multiple ihdr box are present, only the first one shall be
taken into account.
2016-09-06 01:31:15 +02:00
ccd9ced49e
Add overflow check in opj_j2k_update_image_data ( #817 )
2016-09-06 00:50:44 +02:00
9f24b078c7
Change 'restrict' define to 'OPJ_RESTRICT' ( #816 )
...
Visual Studio 2015 does not pass regression tests with `__restrict` so kept disabled for MSVC.
Need to check proper usage of OPJ_RESTRICT (if correct then there’s
probably a bug in vc14)
Closes #661
2016-09-06 00:49:53 +02:00
4f9abb9a45
[Win32] Use _beginthreadex instead of CreateThread()
2016-08-11 21:59:28 +02:00
54874194a8
Unified bit-field declaration, removed tabs.
2016-07-27 10:09:54 +02:00
d2d35bf6c2
Create separate type for bit-fields.
...
The definition of bit-fields with type OPJ_UINT32 caused complilation errors
on IBM iSeries, because OPJ_UINT32 is defined as uint32_t, and
uint32_t is defined as unsigned long in <stdint.h>. The definition of
bit-fields with an integer type of a specific size doesn't make sense
anyway.
2016-07-25 20:46:11 +02:00
e40c28c2e8
jpwl: Remove non-portable data type u_int16_t (fix issue #796 ) ( #797 )
...
The type casts which used this data type can be removed by changing
the signature of function swap16. As this function is called with
unsigned variables, this change is reasonable.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-07-14 10:49:17 +02:00
18da6155b2
Fix dependency for pkg-config (issue #594 ) ( #795 )
...
openjpeg provides libopenjp2.pc, so the require statements must refer to
libopenjp2 instead of openjp2.
Fixes #594
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-07-12 00:45:51 +02:00
cb72c08472
Update tcd.c ( #790 )
...
cppcheck unitialized variable
2016-06-21 22:13:57 +02:00
7d3c7a345f
Be robust to failed allocations of job structures
2016-05-26 23:51:32 +02:00
69497d35c0
opj_decompress: use clock_gettime() instead of getrusage() so as to get the time spent, and not to the total CPU time
2016-05-25 21:59:43 +02:00
d67cd2220a
opj_decompress: add a -threads <num_threads> option
2016-05-25 21:02:07 +02:00
57b216bb58
Use thread pool for DWT decoding
2016-05-25 21:02:07 +02:00
5fbb8b2645
Use thread-pool for T1 decoding
2016-05-25 21:02:07 +02:00
d4b7f03cfa
Add opj_codec_set_threads() in public API and propagate resulting thread pool to tcd level
...
By default, only the main thread is used. If opj_codec_set_threads() is not used,
but the OPJ_NUM_THREADS environment variable is set, its value will be
used to initialize the number of threads. The value can be either an integer
number, or "ALL_CPUS". If OPJ_NUM_THREADS is set and this function is called,
this function will override the behaviour of the environment variable.
2016-05-25 21:02:07 +02:00
54179fe1d5
Add threading and thread pool API
2016-05-25 21:02:07 +02:00
7092f7ea11
Fix MSVC210 build issue (use of C99 declaration after statement) introduced in ba1edf6cd4
2016-05-23 16:00:28 +02:00
107eb31531
Improve perf of opj_t1_dec_sigpass_mqc_vsc() and opj_t1_dec_refpass_mqc_vsc() with loop unrolling
2016-05-23 13:45:15 +02:00
8371491a99
Better inlining of opj_t1_updateflagscolflags() w.r.t. flags_stride
2016-05-23 11:53:54 +02:00
956c31d5a6
opj_t1_dec_clnpass(): remove useless test in the runlen decoding path (of the non VSC case)
2016-05-23 11:53:54 +02:00
93f7f90711
opj_t1_decode_cblks(): tiny perf increase when loop unrolling
2016-05-23 11:53:53 +02:00
1da397e94a
Tier 1 decoding: add a colflags array
...
Addition flag array such that colflags[1+0] is for state of col=0,row=0..3,
colflags[1+1] for col=1, row=0..3, colflags[1+flags_stride] for col=0,row=4..7, ...
This array avoids too much cache trashing when processing by 4 vertical samples
as done in the various decoding steps.
2016-05-23 11:53:53 +02:00
31882ad7f4
Const'ify lut arrays so they are in the read-only data section
2016-05-22 00:54:06 +02:00
ba1edf6cd4
Reduce number of occurrences of orient function argument
...
This is essentially used to shift inside the lut_ctxno_zc, which we
can precompute at the beginning of opj_t1_decode_cblk() /
opj_t1_encode_cblk()
2016-05-22 00:50:34 +02:00
23a01dfdef
Specialize decoding passes for 64x64 code blocks
2016-05-21 16:27:35 +02:00
d8fef96f23
Improve code generation in opj_t1_dec_clnpass()
...
Add a opj_t1_dec_clnpass_step_only_if_flag_not_sig_visit() method that
does the job of opj_t1_dec_clnpass_step_only() assuming the conditions
are met. And use it in opj_t1_dec_clnpass(). The compiler generates
more efficient code.
2016-05-21 15:52:02 +02:00
c539808d09
opj_t1_updateflags(): tiny optimization
...
We can avoid using a loop-up table with some shift arithmetics.
2016-05-21 15:46:56 +02:00
426bf8d337
Move some MQC functions into a header for speed
...
Allow these hot functions to be inlined. This boosts decode performance by ~10%.
2016-05-21 15:18:07 +02:00
4d2b6a671a
Update implementation of opj_calloc ( #705 )
2016-05-10 22:08:49 +02:00
aae066debc
Add missing source for the JPIP library and executables (issue #658 ) ( #659 )
...
They all need opj_malloc and other functions from opc_malloc.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-05-10 22:02:49 +02:00
1a8318f6c2
Fix Out-of-Bounds Access in function opj_tgt_reset
...
Fix uclouvain/openjpeg#775
2016-05-08 20:10:13 +02:00
162f6199c0
Fix Heap Buffer Overflow in function color_cmyk_to_rgb
...
Fix uclouvain/openjpeg#774
2016-05-08 19:18:05 +02:00
8f9cc62b3f
Fix division by zero
...
Fix uclouvain/openjpeg#733
2016-05-08 18:40:12 +02:00
17a0a8a195
Use lowercase for cmake commands consistenly
...
Inspired from https://github.com/InsightSoftwareConsortium/ITK/blob/master/Utilities/Maintenance/HowToCreateTheCMakeCaseConversion.txt
This needs vim 7.3 and fails with vim 7.4
This also fixes a number of :
- missing empty line at end of files
- useless space at end of lines
2016-05-02 16:05:41 +02:00
e1e018a8dc
Fix UBSan gcc warning for first arg to memset non null
2016-05-02 12:13:24 +02:00
72deb588cb
Merge pull request #706 from mayeut/issue135
...
Fix issue 135
The fix is legal regarding the standard but I did not manage to find out if it covers a bug in opj_t2_read_packet_data or if the file is corrupted
2016-04-30 13:51:01 +02:00
cd77b6003b
Fix some coverity warnings
2016-04-30 12:15:22 +02:00
f40a2ff2ad
Fix bad call to fclose with NULL pointer
2016-04-30 01:50:33 +02:00
be42e72d22
Fix warnings ( #763 )
2016-04-30 01:12:16 +02:00
15f081c896
Fix Out-Of-Bounds Read in sycc42x_to_rgb function ( #745 )
...
42x Images with an odd x0/y0 lead to subsampled component starting at the
2nd column/line.
That is offset = comp->dx * comp->x0 - image->x0 = 1
Fix #726
2016-04-30 00:33:27 +02:00
ad593c9e06
Fix heap-buffer-overflow in color_esycc_to_rgb ( #748 )
...
When all components do not have the same dx/dy, components buffer are
read beyond their end.
Do not convert in this case.
Update uclouvain/openjpeg#725
2016-04-29 23:51:14 +02:00
319fc971fe
cppcheck fix for openjp2 ( #740 )
2016-04-29 23:49:17 +02:00
e166e4a209
Check SSIZ is valid in opj_j2k_read_siz ( #762 )
2016-04-28 19:20:14 +02:00
29313eb5f1
Fix unsigned int overflow reported by UBSan ( #761 )
...
* Fix unsigned int overflow reported by UBSan
Please add -DOPJ_UBSAN_BUILD to CFLAGS when building with
-fsanitize=undefined,unsigned-integer-overflow
It seems clang/gcc do not allow to disable checking for block of code
other than function or file.
2016-04-28 13:16:43 +02:00
e982d03966
Fix implicit float-to-bool conversions ( #752 )
2016-04-28 11:52:45 +02:00
66fd497765
Fix unsigned int overflow reported by UBSan ( #759 )
2016-04-28 00:18:37 +02:00
20789fed4e
Fix issue 135
...
dwt_interleave_h.gsr105.jp2 now has the same output as kakadu
issue399 is corrupted. Only the corrupted part changes.
Update known failures for x86 MD5
NR-DEC-kodak_2layers_lrcp.j2c-31-decode-md5
NR-DEC-kodak_2layers_lrcp.j2c-32-decode-md5
NR-DEC-issue135.j2k-68-decode-md5
2016-04-27 23:15:47 +02:00
e6881e7527
Fix negative shift left reported by UBSan ( #758 )
...
Follow-up of #757
This shall have no performance impact on 2’s complement machine where
the compiler replaces the multiplication by power of two (constant) by
a left shift.
Verified at least on MacOS Xcode 7.3, same assembly generated after fix.
2016-04-27 21:56:09 +02:00
Even Rouault
Even Rouault
Stefan Weil
szukw000
Antonin Descampe
Antonin Descampe
Jeroen
Russell McOrmond
Mathieu Malaterre
Matthieu Darbois
trylab
Stephan Mühlstrasser
Stephan Mühlstrasser
maddin200
Kal Conley
Julien Malik
julienmalik