flawfinder/makefile

# Flawfinder.
# Released under the General Public License (GPL) version 2 or later.
# (C) 2001-2017 David A. Wheeler.

# See "release_process.md" for release process, including
# how to change version numbers.

NAME=flawfinder
VERSION=2.0.10
RPM_VERSION=1
VERSIONEDNAME=$(NAME)-$(VERSION)
ARCH=noarch

SAMPLE_DIR=/usr/src/linux-2.2.16
PYTHON=python
PYTHON2=python2
PYTHON3=python3

# Flawfinder has traditionally used INSTALL_DIR, INSTALL_DIR_BIN, and
# INSTALL_DIR_MAN.  Here we add support for GNU variables like prefix, etc.;
# users who override the older flawfinder-specific variable names will
# not notice any changes.  We define exec_prefix oddly so we can
# quietly merge these 2 systems:

prefix=/usr/local
INSTALL_DIR=$(prefix)
exec_prefix=$(INSTALL_DIR)
bindir=$(exec_prefix)/bin
INSTALL_DIR_BIN=$(bindir)

datarootdir=$(INSTALL_DIR)/share
mandir=$(datarootdir)/man
man1dir=$(mandir)/man1
INSTALL_DIR_MAN=$(man1dir)

FLEX=flex

# For Cygwin on Windows, set PYTHONEXT=.py
# (EXE=.exe would be needed on some systems, but not for flawfinder)
EXE=
PYTHONEXT=
# EXE=.exe
# PYTHONEXT=.py

# The rpm build command.  "rpmbuild" for rpm version 4.1+
# (e.g., in Red Hat Linux 8), "rpm" for older versions.

RPMBUILD=rpmbuild

DESTDIR=

all: flawfinder.pdf flawfinder.1.gz
	chmod -R a+rX *

# We use the "-p" option of mkdir; some very old Unixes
# might not support this option, but it's a really common option
# and required by SUSv3 (and probably earlier, I haven't checked).
MKDIR_P=mkdir -p

INSTALL_PROGRAM=cp -p
INSTALL_DATA=cp -p

# This installer doesn't install the compiled Python bytecode.
# It doesn't take long to compile the short Python code, so
# it doesn't save much time, and having the source code available
# makes it easier to see what it does.  It also avoids the
# (admittedly rare) problem of bad date/timestamps causing the
# compiled code to override later uncompiled Python code.
install:
	-$(MKDIR_P) $(DESTDIR)$(INSTALL_DIR_BIN)
	$(INSTALL_PROGRAM) flawfinder $(DESTDIR)$(INSTALL_DIR_BIN)/flawfinder$(PYTHONEXT)
	-$(MKDIR_P) $(DESTDIR)$(INSTALL_DIR_MAN)
	$(INSTALL_DATA) flawfinder.1 $(DESTDIR)$(INSTALL_DIR_MAN)/flawfinder.1

uninstall:
	rm -f $(DESTDIR)$(INSTALL_DIR_BIN)/flawfinder$(PYTHONEXT)
	rm -f $(DESTDIR)$(INSTALL_DIR_MAN)/flawfinder.1

flawfinder.1.gz: flawfinder.1
	gzip -c9 < flawfinder.1 > flawfinder.1.gz

flawfinder.ps: flawfinder.1
	man -t ./flawfinder.1 > flawfinder.ps

flawfinder.pdf: flawfinder.ps
	ps2pdf flawfinder.ps flawfinder.pdf

# Not built by default, since man2html is not widely available
# and the PDF is prettier.
flawfinder.html: flawfinder.1
	man2html flawfinder.1 | tail -n +3 > flawfinder.html

clean:
	rm -f *.pyc
	rm -f flawfinder-$(VERSION).tar.gz
	rm -f cwe.c cwe
	rm -f *.tar *.exe ./cwe

distribute: clean flawfinder.pdf flawfinder.ps
	rm -fr build dist flawfinder.egg-info ,tempdir
	chmod -R a+rX *
	mkdir ,tempdir
	cp -p [a-zA-Z]* ,tempdir
	rm -f ,tempdir/*.tar.gz
	rm -f ,tempdir/*.rpm
	# We don't need both "flawfinder" and "flawfinder.py":
	rm -f ,tempdir/flawfinder.py
	mv ,tempdir flawfinder-$(VERSION)
	# Nobody else needs "update" either.
	rm -f ,tempdir/update
	# Don't need compressed version of document.
	rm -f ,tempdir/flawfinder.1.gz
	# Don't include (out of date) index.html
	rm -f ,tempdir/index.html
	tar cvfz flawfinder-$(VERSION).tar.gz flawfinder-$(VERSION)
	chown --reference=. flawfinder-$(VERSION).tar.gz
	rm -fr flawfinder-$(VERSION)

dist: distribute

# This *creates* a PyPi distribution package. Use "upload-pypi" to upload it
pypi:
	python setup.py bdist_wheel --universal

# NOTE: Only do this after running "make pypi" & being satisfied with it
# Use "-r pypitest" to upload to pypitest.
upload-pypi:
	twine upload dist/*

time:
	echo "Timing the program. First, time taken:"
	time ./flawfinder $(SAMPLE_DIR)/*/*.[ch] > /dev/null
	echo "Lines examined:"
	wc -l $(SAMPLE_DIR)/*/*.[ch] | tail -2

test_001: flawfinder test.c test2.c
	@echo 'test_001 (text output)'
	@# Omit time report so that results are always the same textually.
	@$(PYTHON) ./flawfinder --omittime test.c test2.c > test-results.txt
	@echo >> test-results.txt
	@echo "Testing for no ending newline:" >> test-results.txt
	@$(PYTHON) ./flawfinder --omittime no-ending-newline.c | \
	  grep 'Lines analyzed' >> test-results.txt
	@diff -u correct-results.txt test-results.txt

test_002: flawfinder test.c test2.c
	@echo 'test_002 (HTML output)'
	@$(PYTHON) ./flawfinder --omittime --html --context test.c test2.c > test-results.html
	@diff -u correct-results.html test-results.html

test_003: flawfinder test.c test2.c
	@echo 'test_003 (CSV output)'
	@$(PYTHON) ./flawfinder --csv test.c test2.c > test-results.csv
	@diff -u correct-results.csv test-results.csv

test_004: flawfinder test.c
	@echo 'test_004 (single-line)'
	@$(PYTHON) ./flawfinder -m 5 -S -DC --quiet test.c > \
	  test-results-004.txt
	@diff -u correct-results-004.txt test-results-004.txt

test_005: flawfinder test-diff-005.patch test-patched.c
	@echo 'test_005 (diff)'
	@$(PYTHON) ./flawfinder -SQDC -P test-diff-005.patch \
	  test-patched.c > test-results-005.txt
	@diff -u correct-results-005.txt test-results-005.txt

test_006: flawfinder test.c
	@echo 'test_006 (save/load hitlist)'
	@$(PYTHON) ./flawfinder -S -DC --quiet \
	  --savehitlist test-saved-hitlist-006.txt \
	  test.c > test-junk-006.txt
	@$(PYTHON) ./flawfinder -SQDC -m 5 \
	  --loadhitlist test-saved-hitlist-006.txt > \
	  test-results-006.txt
	@diff -u correct-results-006.txt test-results-006.txt

test_007: setup.py
	@echo 'test_007 (setup.py sane)'
	@test "`$(PYTHON) setup.py --name`" = 'flawfinder'
	@test "`$(PYTHON) setup.py --license`" = 'GPL-2.0+'
	@test "`$(PYTHON) setup.py --author`" = 'David A. Wheeler'

test_008: flawfinder test.c
	@echo 'test_008 (diff hitlist)'
	@$(PYTHON) ./flawfinder -S -DC --quiet \
	  --savehitlist test-saved-hitlist-008.txt \
	  test.c > test-junk-008.txt
	@$(PYTHON) ./flawfinder -S -C --quiet --omittime \
	  --diffhitlist  test-saved-hitlist-008.txt test.c > \
	  test-results-008.txt
	@diff -u correct-results-008.txt test-results-008.txt

# Run all tests on *one* version of Python;
# output shows differences from expected results.
# If everything works as expected, it just prints test numbers.
# Set PYTHON as needed, including to ""
test: test_001 test_002 test_003 test_004 test_005 test_006 test_007 test_008
	@echo 'All tests pass!'

# Usual check routine. Run all tests using *both* python2 and python3.
check:
	@echo "Testing with $(PYTHON2)"
	@PYTHON="$(PYTHON2)" $(MAKE) test
	@echo
	@echo "Testing with $(PYTHON3)"
	@PYTHON="$(PYTHON3)" $(MAKE) test

# Run "make test-is-correct" if the results are as expected.
test-is-correct: test-results.txt
	cp -p test-results.txt correct-results.txt
	cp -p test-results.html correct-results.html
	cp -p test-results.csv correct-results.csv
	cp -p test-results-004.txt correct-results-004.txt
	cp -p test-results-005.txt correct-results-005.txt
	cp -p test-results-006.txt correct-results-006.txt
	cp -p test-results-008.txt correct-results-008.txt

profile:
	/usr/lib/python1.5/profile.py ./flawfinder > profile-results $(SAMPLE_DIR)/*/*.[ch] > profile-results 


rpm: distribute
	chmod -R a+rX *
	cp $(VERSIONEDNAME).tar.gz /usr/src/redhat/SOURCES
	cp flawfinder.spec /usr/src/redhat/SPECS
	cd /usr/src/redhat/SPECS
	$(RPMBUILD) -ba flawfinder.spec
	chmod a+r /usr/src/redhat/RPMS/$(ARCH)/$(VERSIONEDNAME)-$(RPM_VERSION)*.rpm
	chmod a+r /usr/src/redhat/SRPMS/$(VERSIONEDNAME)-$(RPM_VERSION)*.src.rpm
	# cp -p /usr/src/redhat/RPMS/$(ARCH)/$(VERSIONEDNAME)-$(RPM_VERSION)*.rpm .
	# cp -p /usr/src/redhat/RPMS/$(ARCH)/$(VERSIONEDNAME)-$(RPM_VERSION)*.rpm  $(VERSIONEDNAME)-$(RPM_VERSION).noarch.rpm
	cp -p /usr/src/redhat/RPMS/$(ARCH)/$(VERSIONEDNAME)-$(RPM_VERSION)*.rpm  .
	cp -p /usr/src/redhat/SRPMS/$(VERSIONEDNAME)-$(RPM_VERSION)*.src.rpm .
	chown --reference=README.md *.rpm
	# Install, for testing.  Ignore the "not installed" message here,
	# unless you already installed it; we're just removing any old copies:
	-rpm -e flawfinder
	rpm -ivh /usr/src/redhat/RPMS/$(ARCH)/$(VERSIONEDNAME)-$(RPM_VERSION)*.rpm
	echo "Use rpm -e $(NAME) to remove the package"
	chown --reference=. *.rpm

# This is a developer convenience target, not intended for general use.
my-install: flawfinder.pdf flawfinder.ps test
	cp -p $(VERSIONEDNAME).tar.gz \
	      flawfinder flawfinder.1 makefile \
	      flawfinder.pdf flawfinder.ps ChangeLog \
	      test.c test2.c test-results.txt test-results.html \
	           /home/dwheeler/dwheeler.com/flawfinder/

# This is intended to be a local capability to list CWEs
cwe.c: cwe.l
	$(FLEX) -o cwe.c cwe.l

cwe: cwe.c
	$(CC) -o cwe cwe.c -lfl

show-cwes: cwe
	./cwe < flawfinder | sort -u -V

pylint:
	pylint flawfinder

.PHONY: install clean test check profile test-is-correct rpm \
  uninstall distribute my-install show-cwes pylint

# When I switch to using "DistUtils", I may need to move the MANIFEST.in
# file into a subdirectory (named flawfinder-versionnumber).
# I can then create all the distribution files by just typing:
#  python setup.py bdist_rpm