ef40879b5f
Refactor nghttp2_stream
...
Combine deferred_data and data into data_item and merge deferred_flags
into flags.
2014-04-02 22:55:49 +09:00
2685e3405f
Rename NGHTTP2_DATA_PAYLOAD_LENGTH as NGHTTP2_DATA_PAYLOADLEN
2014-04-02 20:35:07 +09:00
9c4c99bf96
Adjust transmission frame buffer size to support maximum payload size
2014-04-02 20:33:01 +09:00
c9f90924a9
Add flags parameter to nghttp2_on_header_callback
2014-04-02 02:10:35 +09:00
b1722cbe28
Update static table
2014-04-02 01:30:50 +09:00
7877b676e3
Honor NGHTTP2_NV_FLAG_NO_INDEX in deflater and inflater
2014-04-02 01:25:44 +09:00
24cb90806d
Add flags to nghttp2_nv structure
...
This is preliminary change for upcoming HPACK updates. The flags are
used to determine the name/value pair is indexable or not.
2014-04-01 23:17:50 +09:00
f785e56dba
Implement ALTSVC frame
2014-04-01 21:47:51 +09:00
b85e2ab7f7
Share stream_group weight among streams marked as top
2014-03-31 22:51:33 +09:00
ab2dc5967d
Replace HTTP/2.0 with HTTP/2
2014-03-30 19:26:37 +09:00
21d5986157
Fail nghttp2_submit_settings if there is pending SETTINGS frame in-flight
...
pending_local_max_concurrent_stream is now set in
nghttp2_session_add_settings, rather than after frame was sent.
2014-03-30 18:07:52 +09:00
74daa16a1c
Retain incoming closed streams for dependency tree
...
The number of closed stream to keep is limited by
MAX_CONCURRENT_STREAMS - current active stream.
2014-03-30 17:41:54 +09:00
f7162ab702
Implement dependency based priority
2014-03-30 01:24:16 +09:00
e1eebf08fb
Support DEBUG_DATA in GOAWAY again
2014-03-22 18:59:59 +09:00
01586f473d
Wrap small inbound buffer by nghttp_buf
2014-03-22 18:27:38 +09:00
68b392817b
nghttp2_bufs: Add chunk_keep to specify the number of buffers to keep on reset
2014-03-16 21:38:13 +09:00
2ec4b10805
Add nghttp2_buf tests
2014-03-14 21:40:14 +09:00
b464cb78ac
Fix tests to reflect their intent
2014-03-14 00:25:43 +09:00
1be8d1b797
inflate_header_block: Issue RST_STREAM if header decompression failed
2014-03-13 23:02:33 +09:00
d07bb1ddff
Rework outbound frame buffers
2014-03-13 22:11:02 +09:00
0666a73e10
Remove nghttp2_buffer
2014-03-11 21:20:51 +09:00
74f899fc01
Replace NGHTTP2_MAX_FRAME_LENGTH with NGHTTP2_MAX_PAYLOADLEN
2014-03-11 02:01:08 +09:00
e803c6b65e
Replace NGHTTP2_FRAME_HEAD_LENGTH with NGHTTP2_FRAME_HDLEN
2014-03-11 01:55:42 +09:00
358b4386d3
Introduce nghttp2_buf to ease buffer management
2014-03-11 01:47:38 +09:00
54dab50015
Support END_SEGMENT in nghttp2_submit_data()
2014-03-06 00:19:02 +09:00
547d6d1fb5
Use 4086 as max DATA payload size to make DATA frame fit into 4K buffer
2014-03-05 22:48:17 +09:00
6f0b9128b4
tests: Fix leak
2014-02-28 03:07:19 +09:00
d1c1deaf03
Add promised_stream_user_data parameter to nghttp2_submit_push_promise
...
This is very useful to associate application specific data to promised
stream.
nghttp2_nv_array_copy now does not complain the header field is large.
2014-02-25 00:26:12 +09:00
fc25143418
Remove END_PUSH_PROMISE in favor of END_HEADERS
2014-02-21 21:23:51 +09:00
a21175398d
Add test to verify that deflater can handle initial buf smaller than default
2014-02-21 21:18:46 +09:00
3395f7158f
Strict handling of max concurrent streams
...
Exceeding ACKed max concurrent streams results in connection error.
This change fixes the bug that num_{incoming,outgoing}_streams
is decremented wrongly if a stream is in reserved state and
RST_STREAM is send and its state is changed to NGHTTP2_STREAM_CLOSING.
This change also fixes the bug that transmission of push response
HEADERS does not increase num_outgoing_streams.
2014-02-20 23:10:32 +09:00
2966ad2d15
Update doc
2014-02-19 00:16:25 +09:00
3f3f258cd6
Add padding to PUSH_PROMISE
2014-02-15 16:30:43 +09:00
1e95c8b313
Allow always max 1024 padding for HEADERS
...
We need paddings regardless of payload and frame boundary to mitigate
certain attacks.
Since we handles CONTINUATION internally, we don't show FLAG_PAD_HIGH
and PAD_LOW flags of HEADERS in nghttp/nghttpd. We just show the
total paddings in HEADERS + CONTINUATION.
2014-02-15 01:34:04 +09:00
7ab4206269
Tear down connection if SETTINGS makes window size overflow
2014-02-14 16:08:39 +09:00
fd88c6160d
HPACK post -05 updates
...
* Use 1 Huffman code table for both request and response
* Remove complicated deflater side table size management
* Add encoding context update
* Fix memory leak in inflater
2014-02-13 23:22:52 +09:00
c7a17093cb
Fix compile errors with --enable-maintainer-mode
2014-02-11 21:39:35 +09:00
067a4d05c3
Merge branch 'master' into draft-10
2014-02-11 21:33:49 +09:00
d3fb352c0e
Fix invalid memory use
2014-02-11 21:33:22 +09:00
7822bbd7e8
Fix PAD_HIGH and PAD_LOW are not counted in flow control
2014-02-11 21:30:44 +09:00
cf0b880b15
Error if undefined SETTINGS ID is detected in nghttp2_iv_check
2014-02-11 16:53:08 +09:00
109b8cedde
Fix compile error and test failures
2014-02-11 16:12:26 +09:00
e78a2100ec
Merge branch 'master' into draft-10
2014-02-11 16:03:42 +09:00
cacf4ecf26
Fix premature header block is not treated as connection error
2014-02-11 16:00:59 +09:00
cbbecfeb41
Fix broken session_detect_idle_stream()
2014-02-11 15:35:44 +09:00
78d202ac30
Callback based padding from application
...
Now previous padding options are removed and instead we added
select_padding_callback to select padding length for each frame
by application. If this callback is not implemented by application,
no padding is added.
This change also fixes the broken session_detect_idle_stream()
if stream_id is our side.
2014-02-11 15:28:44 +09:00
68b5ffc1dc
Rename padding related names
2014-02-09 21:46:15 +09:00
909b79e69b
Fix test
2014-02-09 18:33:27 +09:00
945c57c335
Add test for nghttp2_frame_pack_headers with padding
2014-02-09 15:17:26 +09:00
1db2195389
Implement padding for HEADERS and CONTINUATION
2014-02-09 15:17:26 +09:00
814d0f76f3
Implement DATA frame padding
2014-02-08 00:23:18 +09:00
f26270b5b4
Change SETTINGS payload format according to the spec
2014-02-06 22:06:42 +09:00
f2c654f898
Fix reception of ENABLE_PUSH ignored; strict check for SETTINGS value
2014-02-06 21:39:58 +09:00
c79adf6997
Remove flow control disabling feature
2014-02-06 00:23:20 +09:00
196406da0e
Change protocol identifier to h2-10
2014-02-05 23:37:27 +09:00
8be17f077a
Add nghttp2_check_header_name and nghttp2_check_header_value APIs
...
These are promoted to public API from src/http2.h
2014-02-01 19:31:50 +09:00
08ff95d402
Detect frame reception for idle stream and make it connection error
...
Only stream ID which larger than currently used stream ID is
detected as idle.
2014-02-01 17:03:55 +09:00
ab684a9f30
Remove nghttp2_on_request_recv_callback
...
It is easy enough to check the end of incoming data by evaluating
frame->hd.flags & NGHTTP2_FLAG_END_STREAM in on_frame_recv_callback
2014-01-29 21:56:01 +09:00
e186e01933
Replace on_end_headers_callback with on_begin_headers_callback
...
Previously, there is inconsistency when on_frame_recv_callback
is called between HEADERS/PUSH_PROMISE and the other frames.
For former case, it is called before header block, in latter
case, it is called after whole frame is received. To make it
consistent, we call on_frame_recv_callback for HEADERS/PUSH_PROMISE
after its frame is fully received. Since on_frame_recv_callback
can signal the end of header block, we replaced on_end_headers_callback
with on_begin_headers_callback, which is called when the reception
of the header block is started.
2014-01-29 21:23:13 +09:00
a3082b7c1e
Remove nghttp2_on_data_recv_callback and nghttp2_on_data_send_callback
...
nghttp2_data is added to nghttp2_frame union. When DATA is
received, nghttp2_on_frame_recv_callback is called. When DATA is
sent, nghttp2_on_frame_send_callback is called.
2014-01-27 22:16:05 +09:00
fc07a62337
Rename nghttp2_data as nghttp2_private_data
...
This is a preparation to add public nghttp2_data struct to
nghttp2_frame union.
2014-01-27 21:22:33 +09:00
9314e30987
Support transmission of CONTINUATION, change nghttp2_frame_hd
...
The maximum frame size including header block is still limited
to NGHTTP2_HD_MAX_BUFFER_LENGTH, which is 32KB.
2014-01-26 23:10:33 +09:00
91401cfe26
Support CONTINUATION frame reception
2014-01-26 20:31:28 +09:00
e7fc2951b8
nghttp2_hd: Define dedicated struct for HPACK deflater and inflater
2014-01-26 17:53:04 +09:00
45a9f0b637
Remove nghttp2_frame_unpack_* functions
2014-01-26 16:46:18 +09:00
dba2406aba
nghttp2_sesson_mem_recv: Process incoming data in streaming fashion
...
Now incoming data is processed in very small buffer (up to 8 bytes)
using state machine. GOAWAY debug data can get to 16K - 1, and we
don't have callback for it. Since we don't want to buffer that
amount of data just for debugging, we currently discard it.
This change also makes parse_error callback not function.
It probably be removed from API.
2014-01-26 15:44:43 +09:00
8317559090
nghttp2_hd: Implement stream header inflater
...
This stream inflater can inflate incoming header block in streaming
fashion. Currently, we buffer up single name/value pair, but we chose
far more smaller buffer size than HTTP/2 frame size.
2014-01-25 18:24:15 +09:00
201ab1a140
nghttp2_hd: Adjust maximum size to index based on table size
2014-01-21 21:49:53 +09:00
2222b5ab0d
Don't return NGHTTP2_ERR_STREAM_CLOSED when submitting DATA, PRIORITY, WU
...
Remove the check to see that stream exists at the time when submitting
DATA, PRIORITY and WINDOW_UPDATE. We will do this check when we actually
serialize and send them off to the network (or application provided
buffer).
2014-01-18 16:19:28 +09:00
6cd20c55d4
tests: Fix compile error with --enable-maintainer-mode
2014-01-18 00:44:32 +09:00
22a4e3eab8
Remove nghttp2_session_continue
...
nghttp2_session_continue is removed. Now just call
nghttp2_session_mem_recv to continue after NGHTTP2_ERR_PAUSE.
2014-01-17 22:52:30 +09:00
5d535766bf
inflate_header_block: Terminate session on compression error
...
Code cleanup is done as well
2014-01-17 10:13:33 +09:00
707a0b4103
Move name/value validation functions to src
...
nghttp2 library itself now accept octet header/value pairs,
completely not restricted by HTTP/1 header name/value rule.
The applications may impose restriction about them using
validators.
2014-01-17 02:16:53 +09:00
0e4b3d435e
Emit header name/value pair using callback functions
...
Now, in nghttp2_on_frame_recv_callback, nva and nvlen in
HEADERS and PUSH_PROMISE frames are always NULL and 0 respectively.
The header name/value pairs are emitted successive
nghttp2_on_header_callback functions. The end of header fields are
signaled with nghttp2_on_end_headers_callback function.
Since NGHTTP2_ERR_PAUSE for nghttp2_on_frame_recv_callback is
introduced to handle header block, it is now deprecated.
Instead, nghttp2_on_header_callback can be paused using
NGHTTP2_ERR_PAUSE.
2014-01-17 01:49:43 +09:00
9dcd6b003d
Refactor configure options
...
--enable-src is renamed as --enable-app. Fix build failure if
libxml2 is not available.
2014-01-10 23:19:36 +09:00
a85a11c1d9
Update priority for the stream to get response only
2014-01-09 23:30:45 +09:00
5aa487c5ba
nghttp2_stream: flags is now nghttp2_stream_flags
...
We use this flag to know whether it is pushed or not
2014-01-09 23:01:02 +09:00
45837a2cfa
Ensure PRIORITY frame reception/transmission rule
2014-01-09 22:06:38 +09:00
888792a949
nghttp2_hd: Allow HTAB and obs-text characters for field-content
2014-01-03 22:46:40 +09:00
dfcdea894b
Move header name/value pair validation to on_*_received functions
2013-12-25 23:38:55 +09:00
7c4dbb6ffc
nghttp2_hd: Don't malloc if huffman encoded string has 0 length
2013-12-19 23:19:14 +09:00
e61876ccbd
nghttp2_hd: Provide dedicated function to enable no reference set feature
2013-12-14 18:48:41 +09:00
41104f7b63
Abandon DATA frame priority adjustment (again)
...
We tried several times about this subject, but for the current
HTTP/2.0 priority scheme, we think it is best to serve the highest
priroty streams first (interleaving streams if there are several
higest ones). There are an issue when aggregating several frontend
connections to one connection in backend, but it is HTTP/2.0
spec issue, rather than implementation.
2013-12-14 17:02:59 +09:00
6c77cec270
Remove nghttp2_submit_* API functions which has char **nv parameter
...
The nghttp2_submit_{request,response}2 functions are renamed as
nghttp2_submit_{request, response}.
2013-12-08 21:39:43 +09:00
84d1fffb3f
Announce HTTP-draft-09/2.0
2013-12-05 23:23:39 +09:00
1dea4e154b
Reintroduce priority adjustment for DATA frame
...
This mechanism existed but was deleted. We bring it back in order to
prevent lower priority streams from starving.
2013-12-05 23:12:18 +09:00
a3c888d7d1
nghttp2_map: Implement hash table
2013-12-05 00:53:03 +09:00
40a666e7d1
Add nghttp2_submit_response2 tests
2013-11-28 21:47:10 +09:00
e57b3a2139
Set protocol ID to draft-08 temporarily
2013-11-21 21:58:45 +09:00
3d863ed254
nghttp2_hd: Clear reference set with index 0
2013-11-16 17:05:18 +09:00
94ec4dbe42
nghttpd_hd: Update static table and use 1-based index
...
The specification now says that index to the header table entry is
1-based. Since 0-based index is very handy to access arrays, we
internally uses 0-based index. We just convert it to 1-based when
we emit to the block and convert 1-based to 0-based on decoding.
2013-11-16 16:18:44 +09:00
40347487c9
Don't sort headers in library code
...
Remove sorting headers from library code. The application must sort
them if necessary. nghttpx and nghttpd do the sorting of the headers
in stable way if names are equal.
2013-11-13 23:56:02 +09:00
2ae788eddd
Replace nghttp2_set_option with nghttp2_session_{client,server}_new2
...
nghttp2_session_client_new2 and nghttp2_session_server_new2 take
additional parameters which specifies session options.
nghttp2_set_option is somewhat crumsy because of type checking.
Now we use nghttp2_opt_set, which specifies individual options with
types. We changed the value of nghttp2_opt, so this change will
require re-compile.
2013-11-08 00:12:39 +09:00
d5c1eb04c9
Update .gitignore
2013-11-04 18:39:48 +09:00
8cd2b57f8a
tests: Add test for header compression without indexing
2013-11-03 18:30:57 +09:00
7b3dade184
tests: Fix memory leak
2013-11-02 16:55:58 +09:00
4bc44b0c0b
Implement SETTINGS_ENABLE_PUSH
...
It is not clear that SETTINGS_ENABLE_PUSH = 0 disallows HEADERS
to the reserved streams. For now, we just check the reception
and transmission of PUSH_PROMISE against SETTINGS_ENABLE_PUSH.
2013-11-02 16:53:06 +09:00
9ee468ce62
tests: Remove unused function strcopy
2013-11-01 00:32:31 +09:00
f2f8300b62
Add more tests for nghttp2_adjust_local_window_size
2013-10-31 21:26:53 +09:00
49b8ea1bf3
tests: Add failmalloc tests
2013-10-31 02:02:00 +09:00
ad64f11a95
Remove code submitting WINDOW_UPDATE with negative delta
...
It is effectively dead code because we should have already submit
WINDOW_UPDATE before this case happens.
2013-10-30 23:43:40 +09:00
2e7bc014e1
Return 0 if recv_window_size is negative; add tests
2013-10-30 01:58:38 +09:00
6c99ff12c9
nghttp2_hd: Rename local as deflate
2013-10-29 00:42:08 +09:00
2dd44746a6
Merge branch 'master' into hpack-exp
2013-10-28 23:15:14 +09:00
a416891454
tests: Fix test error on 32-bit system
2013-10-28 22:00:49 +09:00
924c858c8f
tests: Add SETTINGS_HEADER_TABLE_SIZE test case
2013-10-28 01:08:09 +09:00
8c530f36cb
Include std lib headers before cunit header file
2013-10-27 23:20:44 +09:00
683253e334
Declare HTTP-draft-07/2.0
2013-10-27 23:16:49 +09:00
67ce60544e
Change maximum frame length to 16383
2013-10-27 21:17:09 +09:00
cfb9857f27
Use FRAME_SIZE_ERROR for invalid payload length
2013-10-27 20:55:44 +09:00
5ace898392
Update error code
2013-10-27 19:31:24 +09:00
a46ccdb144
Apply initiated SETTINGS changes on reception of ACK
2013-10-27 19:22:51 +09:00
cbdd44c4ae
nghttp2_hd: Implement local header table size limit for encoder
2013-10-26 18:49:23 +09:00
8f8c841df0
Merge branch 'master' into hpack-exp
2013-10-25 22:51:51 +09:00
896db5b24f
API change: Add flags parameter to all submit_* functions
...
The nghttp2_submit_{request,response} family do not get this change.
2013-10-25 22:50:24 +09:00
5a81e03497
nghttp2_hd: Add static table entry to dynamic table on emission
2013-10-24 21:52:02 +09:00
d5ccc89fc4
Update huffman table and static table
...
Use huffman table in https://github.com/grmocg/httpbis-header-compression
2013-10-21 23:56:14 +09:00
9e50ae46d9
nghttp_hd: Use NGHTTP2_HD_SIDE_{REQUEST,RESPONSE} instead of {CLIENT,SERVER}
...
This change conveys better notion about compression context.
2013-10-21 00:44:39 +09:00
4e4fab01b1
Merge branch 'master' into hpack-exp
...
Conflicts:
lib/nghttp2_hd.c
2013-10-18 20:06:36 +09:00
0efa6e657f
Fix outbound flow control count
...
We wrongly added the whole payload length even if we sent part of it.
2013-10-18 19:43:59 +09:00
5add90489f
Protocol ID change for HPACK experiment
2013-10-16 01:19:06 +09:00
ed43635c7b
Updated latest initial static header table
2013-10-16 00:09:00 +09:00
50cdcca911
Implement static Huffman for header compression
...
The current implementation uses Huffman code tables described
in http://tools.ietf.org/html/draft-rpeon-httpbis-header-compression-03
2013-10-15 23:55:12 +09:00
8cf3731802
Experiment HPACK with upcoming changes
...
* remove substitution
* reversed insertion and removal from header table
* unified initial static table
2013-10-12 21:49:01 +09:00
e85418f045
Fix local window size adjustments
...
Now shrinking local window size properly limits the amount of
WINDOW_UPDATE value so that shrinked window is honored.
2013-10-12 17:02:37 +09:00
c5501dcb8d
tests: Test WINDOW_UPDATE is queued when certain amount of DATA is received
2013-10-04 21:42:02 +09:00
21d76dcc75
Add nghttp2_session_continue API function
...
The NGHTTP2_ERR_PAUSE library error code is introduced to pause
the execution of nghttp2_session_mem_recv() when that error code
is returned from nghttp2_on_frame_recv_callback or
nghttp2_on_data_chunk_recv_callback. If this happens, the parameters
available for both callbacks are retained until the application
calls nghttp2_session_continue(). The application must retain
input bytes which was used to produce the frame.
After successful call of nghttp2_session_continue, the application
can continue to call nghttp2_session_mem_recv() to process
additional data.
2013-09-28 17:59:24 +09:00
b14a97a273
Update .gitignore
2013-09-14 21:18:08 +09:00
99ba622fed
Add NGHTTP2_OPT_PEER_MAX_CONCURRENT_STREAMS option
...
And utilize it in nghttp to limit initial max concurrent streams.
2013-09-14 19:41:49 +09:00
94263216fb
Add nghttp2_submit_request2
...
This function is similar to nghttp2_submit_request and the
difference is it takes an array of nghttp2_nv as name/value pairs.
It is useful if name/value pairs is not NULL-terminated in the
application code.
2013-09-11 00:55:35 +09:00
a1c3f89c72
nghttp2_pack_settings_payload: added a buffer size argument
...
To make it less likely that a user gets a buffer overflow if a
too small buffer is used.
2013-09-09 21:22:27 +09:00
a6a394902e
tests: Fix out-of-bound read
2013-09-08 23:16:25 +09:00
a67d042a00
tests: Fix buffer overrun
2013-09-08 15:29:46 +09:00
2c127b5cb6
Remove unused functions/macros
2013-09-07 15:48:16 +09:00
4dcf9ad4f2
Make hd encoder ordering aware and one-pass
...
The encoder algorithm is simplified and it now preserves ordering
of the headers. It also becomes one-pass encoder.
2013-09-06 21:53:28 +09:00
d960cf8953
Add const to read-only nghttp2_frame* parameter in callbacks
2013-09-03 21:24:14 +09:00
053c444769
Add int return value to nghttp2_on_request_recv_callback
2013-08-29 23:03:21 +09:00
81653c1d1b
Add int return value to nghttp2_on_stream_close_callback
2013-08-29 22:58:05 +09:00
b9d2f9b6b0
Add int return value to on_frame_not_send_callback
2013-08-29 21:51:58 +09:00
d4852b0f11
Add int return value to on_frame_send_callback
2013-08-29 21:48:34 +09:00
544ac9f61f
Add int return value to nghttp2_on_data_recv_callback
2013-08-29 21:41:33 +09:00
972b47d6af
Add int return value to nghttp2_on_data_chunk_recv_callback
2013-08-29 21:39:32 +09:00
fb7d22fcb9
Add int return value to nghttp2_on_invalid_frame_recv_callback
2013-08-29 21:37:26 +09:00
a59cd3be82
Add int return value to nghttp2_on_frame_recv_callback
2013-08-29 21:33:52 +09:00
66e5ac03a6
Connection error if header continuation is used by peer for now
2013-08-28 23:38:56 +09:00
83b0c89e3c
Handle indexing entry greater than header table limit without error
2013-08-28 23:16:23 +09:00
b37f99ca03
Connection error if payload size is strictly greater than (1 << 14) - 1
...
It would be desired to add option to make this limit configurable.
Fix scripted_recv_callback in tests.
2013-08-28 02:13:57 +09:00
82b9f78fc7
Check incoming header field name strictly
...
The validation rule is described in
http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-02#section-4.1.2
2013-08-25 17:39:29 +09:00
2d41c99289
Connection error if header continuation is employed by peer for now
2013-08-24 19:28:57 +09:00
005e60a5ed
Rework header compression
2013-08-23 23:38:28 +09:00
346fafde3f
Implement draft-ietf-httpbis-header-compression-02
2013-08-23 03:33:05 +09:00
d154faa9ab
Set protocol version draft-06
2013-08-23 03:33:05 +09:00
35229b250f
Treat reception of DATA in reserved stream as connection error
2013-08-23 03:33:05 +09:00
da384988cd
Add test for WINDOW_UPDATE against reserved
2013-08-23 03:33:05 +09:00
e278efdf38
Strict handling of connection error
...
Following cases are now treated as connection error of type
PROTOCOL_ERROR.
* Receiving HEADERS from client in reserved (local)
* Receiving PUSH_PROMISE against peer-initiated stream
* Receiving WINDOW_UPDATE against in reserved (local, remote)
2013-08-23 03:33:05 +09:00
0c9703fa2c
Remove NGHTTP2_FLAG_END_FLOW_CONTROL
2013-08-23 03:33:05 +09:00
b1ae1c30d8
Allow duplicate settings ID in SETTINGS
...
If multiple same ID are found, use the last one.
2013-08-23 03:33:05 +09:00
a52ca391a2
Do not RST_STREAM for DATA against nonexistent stream
...
This may be useful to the misbehaving implementation, but it could
result in lots of RST_STREAM, so just ignore it for now.
2013-08-10 15:13:53 +09:00
6ed8a8957b
Early termination if stream is not found
...
Add this check in nghttp2_submit_{priority, window_update, data,
push_promise}.
2013-08-10 00:02:24 +09:00
1155606d5e
Rewrite re-prioritization with PRIORITY
2013-08-09 23:40:41 +09:00
a3ff4cb50b
Rename window_size member of nghttp2_session as remote_window_size
2013-08-09 01:31:15 +09:00
19377fb3cd
Allow disabling auto WINDOW_UPDATE for connection and stream individually
...
Now NGHTTP2_OPT_NO_AUTO_WINDOW_UPDATE is split into 2 options:
NGHTTP2_OPT_NO_AUTO_STREAM_WINDOW_UPDATE and
NGHTTP2_OPT_NO_AUTO_CONNECTION_WINDOW_UPDATE.
This is preparation for the upcoming removal of END_FLOW_CONTROL
flag. For nghttpx, instead of using END_FLOW_CONTROL to disable
connection-level flow control, increase window size by large
enough value, which is friendly way to current chromium
implementation.
2013-08-09 01:23:39 +09:00
b979d2e8d2
Support increment/reduction of local window size by WINDOW_UPDATE
2013-08-09 00:58:52 +09:00
e67096fef3
Handle overflow in initial window update in stream
...
Rename window_size in nghttp2_stream as remote_window_size.
2013-08-08 21:12:49 +09:00
dcfa421d6f
Fix connection-level flow control (local)
...
Fix the bug that connection-level local window is not updated
for the data is the last part of the stream. For the stream
level window may ignore this, connection-level window must
be updated. Also this change fixes the bug that connection-level
window is not updated for the ignored DATA frames.
2013-08-07 22:02:30 +09:00
73563de8d4
Specify max length for header value and header block
...
The max length of header block is not used right now. It will
be used when header continuation is implemented.
2013-08-06 21:57:26 +09:00
737ac01d91
Add API for HTTP Upgrade
2013-08-03 18:05:14 +09:00
f9c566ec1f
Fix memory leak in unittest
2013-07-28 19:08:49 +09:00
8033152e80
Disable local flow control on FLOW_CONTROL_OPTIONS = 1
2013-07-28 19:05:51 +09:00
608a493925
Change initial window size to 65535
2013-07-27 21:26:47 +09:00
f74674aa7f
Fix header compression (again)
2013-07-27 19:23:05 +09:00
ddd04e8ced
Fix header compression bug, and perform always incremental indexing
2013-07-27 00:58:38 +09:00
e496800cb7
Fix header compression bug
2013-07-26 01:34:28 +09:00
1056d8690e
Rename functions related to HEADERS
2013-07-25 21:07:38 +09:00
84cbebf4f7
Implement server push
2013-07-25 01:59:48 +09:00
321136b042
nghttp2_hd: Don't malloc if namelen/valuelen are zero
2013-07-23 23:10:53 +09:00
0000d3e7f9
Add test for nghttp2_nv_array_from_cstr
2013-07-23 23:03:18 +09:00
b7ff05c4c6
Fail session if header compression failed on send
2013-07-23 22:47:15 +09:00
3c9e31da87
Don't substitute if same indexed header field name is already in working set
2013-07-23 02:52:08 +09:00
ef3caffe8b
Remove push related members from nghttp2_stream
2013-07-23 00:46:55 +09:00
0bcf90d32d
Support PRIORITY frame send and receive
2013-07-23 00:28:00 +09:00
9c58004a86
Cleanup
2013-07-20 01:24:34 +09:00
c3ed20b75d
Remove debug output
2013-07-20 01:19:33 +09:00
e92b74d66e
Use substitution as long as no eviction is required
2013-07-20 01:19:00 +09:00
aa4df35a10
Remove NGHTTP2_OPT_MAX_RECV_CTRL_FRAME_BUFFER option
2013-07-20 00:24:25 +09:00
30d2c86a7a
Remove old zlib compression and other cleanup
2013-07-20 00:20:16 +09:00
61bf7c6b02
Integrate new header compression
2013-07-20 00:08:14 +09:00
45c2245bfb
Implement header compression draft 01
2013-07-19 16:50:31 +09:00
a3bdda68f8
End flow control by WINDOW_UPDATE
2013-07-16 21:30:36 +09:00
d54cfb88ff
Add connection-level flow control
2013-07-16 20:54:24 +09:00
1fdaa7e59a
Disable flow control entirely with FLOW_CONTROL_OPTIONS
2013-07-16 18:26:57 +09:00
24cab312cf
Make spdycat and spdyd barely work
2013-07-16 00:15:04 +09:00
48cb017245
Implement HTTP-draft-04/2.0
2013-07-15 21:45:59 +09:00
05c1eeac85
Disable end_to_end test
...
Will enable it again when spdycat and spdyd are ready for http/2.0
2013-07-13 00:46:24 +09:00
0edce70343
Rebranding nghttp2
2013-07-13 00:43:06 +09:00
f47bf214e5
Allow server initiated stream ID in associated-stream-id
2013-04-05 23:24:28 +09:00
e543441ccc
tests: Fix compiler warning
2013-03-28 01:36:02 +09:00
439b34f49f
Don't allow control characters in outgoing name/value pairs
...
This check is done in spdylay_submit_* family functions and they will
return error if they found control characters.
2013-03-23 21:23:13 +09:00
10c54e44ba
Don't pack multiple empty header values in one header field
...
SPDY spec does not allow multiple empty header values in one header
field. This change makes out-going framer ignore such empty header
value if there is non-empty header value with the same name.
2013-03-23 19:31:22 +09:00
2ca7b51eb6
Fix the incoming last empty header value is not checked properly
...
This change fixes the bug that spdylay_frame_unpack_nv does not check
the size of header value if it is the last value in NULL separated
list.
2013-03-23 18:50:36 +09:00
c235800a1a
Link -ldl with tests only
2013-01-27 16:48:52 +09:00
5adfd07e7c
Fix SPDY/3 priority pack and unpack handling
2013-01-20 19:04:04 +09:00
8a2020362d
tests: Use traditional C-style comments
2012-11-14 21:00:36 +09:00
46e7da2166
Get rid of flags member in spdylay_map
2012-10-05 23:41:49 +09:00
24e932dfa2
Iterative treap implementation
...
This change implements spdylay_map functions in iterative approach
instead of original recursive approach. The iterative version is
overall faster than recursive one. The traversal function
(spdylay_map_each) is slightly slower but it is not noticeable.
2012-10-05 00:46:03 +09:00
e69947a054
Removed trailing spaces
2012-10-01 21:51:24 +09:00
58619a4f97
Enable name/value header compression on server side
2012-09-15 00:47:17 +09:00
088e4f15a2
Check frame length after packing a frame
...
If resultant length of a frame exceeds the maximum value (which is
2**24 - 1 for SPDY/2 and 3), SPDYLAY_ERR_FRAME_TOO_LARGE is used to
indicate this error. This error will be notified by
on_ctrl_not_send_callback.
2012-09-14 22:41:55 +09:00
b8d0b4034c
Eliminate malloc in spdylay_map
...
We use intrusive style pattern in spdylay_stream, which now has
spdylay_map_entry has its first member.
2012-09-12 00:13:02 +09:00
ca415a2a15
Add --enable-src configure option
...
When --enable-src is given, the programs in src directory will be
built. If --disable-src is given, those programs will not be built. If
none of them are given, --enable-src is assumed.
2012-09-10 21:51:08 +09:00
b0fcd68783
Move spdycat, spdyd and shrpx from examples to src
...
To distinguish the to-be-installed programs and non-installable
example source code, the former programs, spdycat, spdydyd and shrpx,
were moved to src directory. spdynative was removed from Makefile
because it does not appeal to any users much.
2012-09-10 21:39:51 +09:00
4e5e741907
Add spdylay_npn_get_proto_list() public API function.
...
spdylay_npn_get_proto_list() returns a pointer to the supported SPDY
version list. The element of the list is spdylay_npn_proto struct. It
contains all SPDY version information this library supports. The
application can use this information to configure NPN protocol
offerings/selection.
2012-08-27 23:16:44 +09:00
f8fcee122a
Check that empty name and NULL value are not included in nv
2012-08-21 23:19:15 +09:00
05e6d527b1
Fix compile error on netbsd
...
Include config.h from sources under examples. Added kevent.udata type
check.
2012-07-27 22:11:13 +09:00
5236394c1c
Take into account shut_flags when accepting DATA frame
2012-06-14 22:39:44 +09:00
7b8768bd3a
Fixed compile error with --enable-maintainer-mode
2012-06-11 23:12:23 +09:00
d12217a1c5
Removed redundant CFLAGS
2012-06-11 23:12:02 +09:00
245c7ff1b3
Return nonzero exit status if test fails. Fixed failmalloc tests.
2012-05-31 21:55:21 +09:00
4dd9c32c25
Added SPDYLAY_OPT_MAX_RECV_CTRL_FRAME_BUFFER option.
...
This option sets maximum receive buffer size for incoming control
frame. Basically the library checks the length field of the incoming
control frame. For frames with name/value header block, the library
also checks the length of inflated block is also under the limit. This
is done while incrementally inflating block. If the length of frames
with name/value header block exceeds the limit, the library will issue
RST_STREAM with FRAME_TOO_LARGE. For other frames, it will issue
GOAWAY.
2012-05-25 13:49:18 +09:00
a6ae4fc72c
Incremental name/value block decompression
2012-05-25 10:46:40 +09:00
a18f04e8c7
Fixed buffer overrun in spdylay_pq_push
2012-05-24 21:35:27 +09:00
b95e9a8c4c
Made spdylay_submit_window_update() not be bounded by recv_window_size
...
Current SPDY/3 spec does not clearly prohibit to send
delta_window_size which makes resulting window size more than initial
window size. For this reason, spdylay_submit_window_update() can send
delta_window_size in [1, (1 << 31)-1], inclusive, without bounded by
stream's recv_window_size. Of course, the application is now
responsible to keep the resulting window size <= (1 << 31)-1.
spdylay_submit_window_update() now returns
SPDYLAY_ERR_INVALID_ARGUMENT if delta_window_size is 0 or negative.
2012-05-20 16:09:57 +09:00
e778f268de
Fixed compiler warning with stricter warning options
2012-05-13 17:38:29 +09:00
164312d857
Added test for EOF from recv_callback.
2012-05-12 18:32:37 +09:00
5c187b950f
spdylay_data_source_read_callback can return
...
SPDYLAY_ERR_TEMPORAL_CALLBACK_FAILURE to signal stream error.
2012-05-12 18:19:05 +09:00
9b619e5dd7
Bring back deferred DATA to the outbound queue when SETTINGS with
...
INITIAL_WINDOW_SIZE is received and the window size becomes positive.
2012-05-11 23:01:40 +09:00
1158de22a3
Added status_code argument to spdylay_on_invalid_ctrl_recv_callback
2012-05-09 23:10:52 +09:00
b7429e7c2d
Added spdylay_submit_window_update() public API.
2012-05-08 23:41:59 +09:00
13ea7c60ba
Added spdylay_session_set_option() public API.
2012-05-08 22:59:34 +09:00
02e4440e4a
Having the number of server and client streams be limited separately
...
using SETTINGS_MAX_CONCURRENT_STREAMS
2012-05-08 00:59:26 +09:00
5412ccf129
Renamed spdylay_gzip API. Added test for them.
2012-05-07 22:56:28 +09:00
7b239cc7b0
Packaging fix
2012-04-25 22:27:50 +09:00
c91a4ec091
Added tests for malloc failures
2012-04-24 22:51:06 +09:00
f74bfae451
Merge remote-tracking branch 'original_master/master'
2012-04-11 12:45:46 -07:00
6c32c50e23
Include spdylay_net.h instead of arpa/inet.h
2012-04-06 23:37:25 +09:00
f7d1ca2740
Move timeout checking into the query parameter condition. Copy last_modified date string for file responses.
2012-04-05 11:11:02 -07:00
828b57c937
Merge branch 'master' of github.com:tatsuhiro-t/spdylay
2012-04-06 02:25:49 +09:00
cb7c0ba142
Fixed typo in union selection
2012-04-06 01:50:48 +09:00
d83d1cd33a
Added CREDENTIAL frame support.
2012-04-06 01:45:39 +09:00
310d88c787
Add a timeout parameter to spdycat and add a crazy parameter to spdyd to test it (or test other clients)
2012-04-04 10:19:00 -07:00
93953c102b
Fixed memory leak in unittest
2012-04-04 00:56:21 +09:00
ba56ed6c48
Hide spdylay_data from public API.
...
The spdylay_data contains full of implementation details and is not
used in public API. It should be hidden.
The spdylay_frame union now only contains the control frame.
2012-03-29 23:59:51 +09:00
8251fa1315
Made OpenSSL not mandatory. Don't build examples if OpenSSL is not found.
...
Spdylay library itself does not depend on OpenSSL. The example programs
in examples directory do. Spdylay library should be built without
OpenSSL.
2012-03-29 02:13:33 +09:00
262cda86e8
Issue RST_STREAM with PROTOCOL_ERROR if invalid header block is received.
...
We say the header block is invalid if at least one of the following
condition is true:
There are duplicate header names; or the header names are not
encoded in US-ASCII character set and not lower cased; or the
header name is zero-length string; or the header value contains
multiple in-sequence NUL bytes.
spdylay_frame_unpack_nv() returns SPDYLAY_ERR_INVALID_HEADER_BLOCK
if the unpacking suceeded but it found the header block is invalid.
This means that caller treats it as success, but do additional
processing for invalid header block if it wants.
The functions calling spdylay_frame_unpack_nv() also return
SPDYLAY_ERR_INVALID_HEADER_BLOCK.
2012-03-26 23:19:58 +09:00
e9b56ab1f6
Added @DEFS@ to CPPFLAGS/CFLAGS.
2012-03-24 00:07:56 +09:00
9e716eb635
Code cleanup: C89 and old-style-prototypes and definition.
2012-03-23 02:17:48 +09:00
425a9558d7
Fixed memory leak in unit test
2012-03-17 23:03:11 +09:00
8f038ae4b6
Added spdylay_session_get_outbound_queue_size()
2012-03-15 23:06:28 +09:00
6024106695
Issue stream error with the status code STREAM_IN_USE if multiple SYN_REPLY
...
frames are received for the same active stream ID.
2012-03-11 22:42:22 +09:00
ce6dc1303e
Issue session error with PROTOCOL_ERROR if SYN_STREAM with a stream ID
...
which is less than any previously received SYN_STREAM.
2012-03-11 19:27:33 +09:00
8284746163
spdylay_submit_syn_stream: Return SPDYLAY_ERR_INVALID_ARGUMENT if even
...
Associated-To-Stream-ID is specified.
Check the Associated-To-Stream is active before sending SYN_STREAM.
2012-03-11 18:55:40 +09:00
94c7e89742
Renamed SPDYLAY_CONCURRENT_STREAMS_MAX as
...
SPDYLAY_INITIAL_MAX_CONCURRENT_STREAMS
2012-03-10 18:49:25 +09:00
02924b6dd0
Added spdylay_submit_settings
2012-03-10 18:41:01 +09:00
82e20192d8
Added functions to process received SETTINGS frame.
...
Now remote and local settings are stored separately.
The initial window size is included in SETTINGS frame, all active stream's
window sizes are now updated.
Removed the initial_window_size member from spdylay_stream because
it is the same as remote_settings's initial window size.
2012-03-10 00:10:11 +09:00
6c9e79e8ca
Use SPDY/3 name in spdylay_settings_flag.
...
Added SPDYLAY_SETTINGS_CLIENT_CERTIFICATE_VECTOR_SIZE.
2012-03-09 21:38:05 +09:00
d05d29b507
Added SPDY/3 SETTINGS frame pack/unpack
2012-03-08 23:49:26 +09:00
0a7c510147
Renamed SPDYLAY_ERR_STREAM_ALREADY_CLOSED as SPDYLAY_ERR_STREAM_CLOSED
...
Added doc for spdylay_error values
2012-03-08 00:37:18 +09:00
0e86cec673
Fixed memory leak in unit tests
2012-03-08 00:25:00 +09:00
11020146f5
Added on_ctrl_not_send_callback.
...
This callback function is invoked after the control frame
is not sent because of the error. The error is indicated by
the error argument, which is one of the values defined in spdylay_error.
2012-03-08 00:18:18 +09:00
00abfc8dd3
Always accept SPDY/3 style name/value pairs from spdylay_submit_* and
...
translate them into SPDY/2 as needed.
2012-03-07 00:38:27 +09:00
ac7b87c7a5
Check Return non-zero for failed spdy requests.
2012-03-02 10:59:07 -08:00
8fd2fabef8
Made spdylay_select_next_protocol() return SPDY protocol version if one of
...
SPDY versions is selected.
2012-03-02 22:52:01 +09:00
4e085a21ea
Verify that the expected version of spdy is used.
2012-03-01 12:41:24 -08:00
3b1b4a6ca0
Add a test for spdy version 3.
2012-03-01 12:09:31 -08:00
9c50bd4c29
Add a simple test between spdycat and spdyd.
2012-03-01 12:04:16 -08:00
097f59e3d3
Fix tests build when building outside the source tree.
2012-03-01 11:07:39 -08:00
7bea01d0ce
Fixed use of uninitialized deflater
2012-03-01 22:40:09 +09:00
abfc100edb
Added convenient function spdylay_frame_nv_norm_copy()
2012-02-28 23:38:40 +09:00
e79de111a4
Added spdylay_submit_syn_reply
2012-02-28 23:27:10 +09:00
3d1b411895
Added test for negative window_size case
2012-02-27 23:24:17 +09:00
036efc1018
Separated SPDY2 and SPDY3 tests to ease debugging
2012-02-26 16:33:53 +09:00
d5cc71c636
Added status_code handling to GOAWAY
2012-02-26 16:26:38 +09:00
8693874340
Added SPDY/3 flow control.
2012-02-26 00:12:32 +09:00
4e62c75b02
Added function to pack and unpack WINDOW_UPDATE frame.
2012-02-25 01:47:37 +09:00
847830f132
Added ability to pack/unpack SPDY/3 frames.
...
Added SPDY/3 zlib dictionary from draft-mbelshe-httpbis-spdy-00.
2012-02-25 01:17:03 +09:00
995ccbc8e5
Added version argument to spdylay_frame_*_init. Added version member to
...
spdylay_session.
2012-02-24 23:33:06 +09:00
7652d3f4ca
Added support for 4 bytes length in name/value pair.
2012-02-24 23:05:49 +09:00
cf7da38598
Define flags separately for control and data frames.
2012-02-24 21:40:13 +09:00
769150d5f7
Added spdylay_submit_headers function.
2012-02-24 00:02:29 +09:00
9e9e281bca
Added spdylay_submit_syn_stream function.
2012-02-23 23:20:05 +09:00
9fa8357bbc
Made return value of spdylay_map_init() void. Updated doc.
2012-02-21 23:23:47 +09:00
37944253d2
Ensure read_callback is non-NULL for response bodies.
2012-02-21 22:04:24 +09:00
6e7025b9f5
Test that FLAG_FIN is set if the read callback is NULL.
2012-02-20 13:12:13 -08:00
2edceb1fb1
Fixed compiler warning
2012-02-19 23:49:43 +09:00
54e4c80b96
Added stream_id argument to spdylay_data_source_read_callback
2012-02-19 23:48:39 +09:00
301eb29cd4
Added ability to postpone DATA frames for asynchronous I/O.
2012-02-19 23:42:25 +09:00
4f28698572
Fixed: if bytes of one frame are received in several chunks, unpacking fails.
2012-02-19 00:05:52 +09:00
03307116a2
Send GOAWAY when spdylay_frame_unpack_* is failed with non-fatal error.
...
SPDYLAY_ERR_ZLIB is now moved back to non-fatal error and it is subject
to GOAWAY if it occurred.
2012-02-18 21:55:40 +09:00
122c619260
Fixed spdylay_frame_count_nv_space() bug. Check all data is processed in spdylay_frame_count_unpack_nv_space()
2012-02-18 17:25:13 +09:00
6f30bbbcb5
Fixed test name
2012-02-16 23:47:04 +09:00
6cb4259232
Merge branch 'master' of https://github.com/sorced-jim/spdylay into sorced-jim-master
2012-02-16 23:41:53 +09:00
ac1629e61b
Reuse buffers when unpacking frames.
2012-02-16 22:01:34 +09:00
050f33e8f9
Reuse buffers when packing frames.
...
Temporal name/value buffer will be shared by unpacking frame.
2012-02-16 20:54:30 +09:00
40e8fc960e
Create a test that explicitly checks that a key exists only once in a name/value block.
2012-02-15 12:07:25 -08:00
85ec883d11
Lower-case names in name/value pairs in spdylay_submit_{request, response}
2012-02-15 23:54:42 +09:00
938f51964d
Respond RST_STREAM with PROTOCOL_ERROR when upper cased name is present in nv.
2012-02-15 22:11:42 +09:00
fd06d21638
Call on_stream_close_callback when server pushed SYN_STREAM has FIN flag set.
...
Don't mix status code and return value in
spdylay_session_on_syn_stream_received.
2012-02-15 00:45:09 +09:00
a48ad800b2
When a stream is canceled by RST_STREAM, don't send further DATA on that stream.
2012-02-12 19:01:23 +09:00
028e1f2b8f
Added test case where DATA frame is backed off by higher priority frame.
2012-02-12 18:30:19 +09:00
ad50b75d75
Fixed compiler warning
2012-02-09 22:48:33 +09:00
Tatsuhiro Tsujikawa
Daniel Stenberg
Jim Morrison