Previously we just assumed that if same settings ID is found in
SETTINGS, it is enough to process last seen entry. But it turns out
it is not enough for SETTINGS_HEADER_TABLE_SIZE. If we have 0 and
4096 for SETTINGS_HEADER_TABLE_SIZE in one SETTINGS, we must first
shrink dynamic table to 0 and then enlarge it to 4096. This means
that we have to remember the minimum value and last value.
Previously in inflater we reserve new ringbuffer when table size is
changed. This may be potentially a problem if new table size is very
large number. When inflater is not used directly by application, this
is not a problem because application can choose the buffer size. On
the other hand, if application uses inflater directly and it does not
have control of new buffer size (e.g., protocol dissector), then we
just fail to allocate large buffer in
nghttp2_hd_inflate_change_table_size() without actually use such huge
buffer. This change defers the actual allocation of buffer when it is
actually needed so that we will fail when it is absolutely needed.
Add last_stream_id parameter to nghttp2_submit_goaway(). To terminate
connection immediately with application chosen last stream ID,
nghttp2_session_terminate_session2() was added.
ALTSVC and BLOCKED frames are now extension frames. To add new
extension frame without modifying nghttp2_frame union, which causes so
name bump, we separated extension frames from core frames.
nghttp2_frame includes generic nghttp2_extension. The payload member
of nghttp2_extension will point to the structure of extension frame
payload. The frame types of extension frames are defined in
nghttp2_ext_frame_type.
Previously we use 2 separate buffer for each name and value. The
problem is we would waste buffer space for name because it is usually
small. Also tuning buffer size for each buffer separately is not
elegant and current HTTP server practice is that one buffer for 1
name/value pair. This commit unifies 2 buffers into 1.
We simulate resource sharing by decreasing weight. The thing is if
weight is wrapped, that item continues to send DATA until its weight
gets lowered under the other items. This commits fix this issue.
Previously stream ID was assigned just before HEADERS or PUSH_PROMISE
was serialized and nghttp2_submit_{request, headers, push_promise} did
not return stream ID. The application has to check assigned stream ID
using before_frame_send_callback. Now it is apparent that priority is
meant to DATA transfer only. Also application can reorder the
requests if it wants. Therefore we can assign stream ID in
nghttp2_submit_* functions and return stream ID from them. With this
change, now application does not have to check stream ID using
before_frame_send_callback and its code will be simplified.
We inherited gzip compression API from spdylay codebase. In spdylay,
the cost of having such API is almost free because spdylay requires
zlib for header compression. nghttp2 no longer uses gzip to header
compression. zlib dependency exists just for gzip compression API,
which is not an essential. So we decided to move gzip code to under
src and remove zlib dependency from libnghttp2 itself. As nghttp2
package, we depend on zlib to compile tools under src.
The library interface supports compressed DATA. The library does not
deflate nor inflate data payload. When sending data, an application
has to compress data and set NGHTTP2_DATA_FLAG_COMPRESSED to
data_flags parameter in nghttp2_data_source_read_callback. On
receiving, flags parameter in nghttp2_on_data_chunk_recv_callback
includes NGHTTP2_FLAG_COMPRESSED. An application should check the
flags and inflate data as necessary. Since compression context is per
frame, when DATA is seen in nghttp2_on_frame_recv_callback, an
application should reset compression context.
If stream with dpri value of no_data, we check any its descendant has
stream with dpri value of top. If so, we have to distribute of its
portion of weight to its descendants.
nghttp2_submit_{headers,request}: Return NGHTTP2_ERR_INVAILD_ARGUMENT
if pri_spec->type is invalid.
nghttp2_submit_push_promise: Return NGHTTP2_ERR_PROTO if issued by
client.
nghttp2_submit_altsvc: Return NGHTTP2_ERR_PROTO instead of
NGHTTP2_ERR_INVALID_STATE if issued by client.
Exceeding ACKed max concurrent streams results in connection error.
This change fixes the bug that num_{incoming,outgoing}_streams
is decremented wrongly if a stream is in reserved state and
RST_STREAM is send and its state is changed to NGHTTP2_STREAM_CLOSING.
This change also fixes the bug that transmission of push response
HEADERS does not increase num_outgoing_streams.
We need paddings regardless of payload and frame boundary to mitigate
certain attacks.
Since we handles CONTINUATION internally, we don't show FLAG_PAD_HIGH
and PAD_LOW flags of HEADERS in nghttp/nghttpd. We just show the
total paddings in HEADERS + CONTINUATION.
* Use 1 Huffman code table for both request and response
* Remove complicated deflater side table size management
* Add encoding context update
* Fix memory leak in inflater
Now previous padding options are removed and instead we added
select_padding_callback to select padding length for each frame
by application. If this callback is not implemented by application,
no padding is added.
This change also fixes the broken session_detect_idle_stream()
if stream_id is our side.
Previously, there is inconsistency when on_frame_recv_callback
is called between HEADERS/PUSH_PROMISE and the other frames.
For former case, it is called before header block, in latter
case, it is called after whole frame is received. To make it
consistent, we call on_frame_recv_callback for HEADERS/PUSH_PROMISE
after its frame is fully received. Since on_frame_recv_callback
can signal the end of header block, we replaced on_end_headers_callback
with on_begin_headers_callback, which is called when the reception
of the header block is started.
nghttp2_data is added to nghttp2_frame union. When DATA is
received, nghttp2_on_frame_recv_callback is called. When DATA is
sent, nghttp2_on_frame_send_callback is called.
Now incoming data is processed in very small buffer (up to 8 bytes)
using state machine. GOAWAY debug data can get to 16K - 1, and we
don't have callback for it. Since we don't want to buffer that
amount of data just for debugging, we currently discard it.
This change also makes parse_error callback not function.
It probably be removed from API.
This stream inflater can inflate incoming header block in streaming
fashion. Currently, we buffer up single name/value pair, but we chose
far more smaller buffer size than HTTP/2 frame size.
Remove the check to see that stream exists at the time when submitting
DATA, PRIORITY and WINDOW_UPDATE. We will do this check when we actually
serialize and send them off to the network (or application provided
buffer).
nghttp2 library itself now accept octet header/value pairs,
completely not restricted by HTTP/1 header name/value rule.
The applications may impose restriction about them using
validators.
Now, in nghttp2_on_frame_recv_callback, nva and nvlen in
HEADERS and PUSH_PROMISE frames are always NULL and 0 respectively.
The header name/value pairs are emitted successive
nghttp2_on_header_callback functions. The end of header fields are
signaled with nghttp2_on_end_headers_callback function.
Since NGHTTP2_ERR_PAUSE for nghttp2_on_frame_recv_callback is
introduced to handle header block, it is now deprecated.
Instead, nghttp2_on_header_callback can be paused using
NGHTTP2_ERR_PAUSE.
We tried several times about this subject, but for the current
HTTP/2.0 priority scheme, we think it is best to serve the highest
priroty streams first (interleaving streams if there are several
higest ones). There are an issue when aggregating several frontend
connections to one connection in backend, but it is HTTP/2.0
spec issue, rather than implementation.
The specification now says that index to the header table entry is
1-based. Since 0-based index is very handy to access arrays, we
internally uses 0-based index. We just convert it to 1-based when
we emit to the block and convert 1-based to 0-based on decoding.
Remove sorting headers from library code. The application must sort
them if necessary. nghttpx and nghttpd do the sorting of the headers
in stable way if names are equal.
nghttp2_session_client_new2 and nghttp2_session_server_new2 take
additional parameters which specifies session options.
nghttp2_set_option is somewhat crumsy because of type checking.
Now we use nghttp2_opt_set, which specifies individual options with
types. We changed the value of nghttp2_opt, so this change will
require re-compile.
It is not clear that SETTINGS_ENABLE_PUSH = 0 disallows HEADERS
to the reserved streams. For now, we just check the reception
and transmission of PUSH_PROMISE against SETTINGS_ENABLE_PUSH.
The NGHTTP2_ERR_PAUSE library error code is introduced to pause
the execution of nghttp2_session_mem_recv() when that error code
is returned from nghttp2_on_frame_recv_callback or
nghttp2_on_data_chunk_recv_callback. If this happens, the parameters
available for both callbacks are retained until the application
calls nghttp2_session_continue(). The application must retain
input bytes which was used to produce the frame.
After successful call of nghttp2_session_continue, the application
can continue to call nghttp2_session_mem_recv() to process
additional data.
This function is similar to nghttp2_submit_request and the
difference is it takes an array of nghttp2_nv as name/value pairs.
It is useful if name/value pairs is not NULL-terminated in the
application code.
Following cases are now treated as connection error of type
PROTOCOL_ERROR.
* Receiving HEADERS from client in reserved (local)
* Receiving PUSH_PROMISE against peer-initiated stream
* Receiving WINDOW_UPDATE against in reserved (local, remote)
Now NGHTTP2_OPT_NO_AUTO_WINDOW_UPDATE is split into 2 options:
NGHTTP2_OPT_NO_AUTO_STREAM_WINDOW_UPDATE and
NGHTTP2_OPT_NO_AUTO_CONNECTION_WINDOW_UPDATE.
This is preparation for the upcoming removal of END_FLOW_CONTROL
flag. For nghttpx, instead of using END_FLOW_CONTROL to disable
connection-level flow control, increase window size by large
enough value, which is friendly way to current chromium
implementation.
Fix the bug that connection-level local window is not updated
for the data is the last part of the stream. For the stream
level window may ignore this, connection-level window must
be updated. Also this change fixes the bug that connection-level
window is not updated for the ignored DATA frames.
SPDY spec does not allow multiple empty header values in one header
field. This change makes out-going framer ignore such empty header
value if there is non-empty header value with the same name.
This change implements spdylay_map functions in iterative approach
instead of original recursive approach. The iterative version is
overall faster than recursive one. The traversal function
(spdylay_map_each) is slightly slower but it is not noticeable.
Tatsuhiro Tsujikawa
Daniel Stenberg