There was (obviously) a copy-paste bug in code converting severities
to GUI's show types. This caused some severities not being
filtered correctly when severity selection in GUI was changed.
Fixes ticket: #3242 (GUI: Unmatched suppression: message in wrong category)
We are using ShowTypes around the GUI codebase so it makes sense
to have it in its own class. And the class also contains related
helper functions instead of scattering them around different
classes.
ShowTypes also contains the visibility settings for all the
GUI severities. Implementation in this commit makes ShowTypes
class to load the visibility settings when it is created. And save
the settings when it is destroyed.
"default" as platform name/definition doesn't tell much and would
only confuse users. "Build-in" is not perfect either but it is
best I've can come with before the release.
Ticket: #3156 (GUI: "default" platform needs proper name)
When GUI was started not all the categories visibility statuses
were not preserved. I.e.
Ticket: #3087 (GUI does not show all reported files until a filter button state is changed)
The iterator was not advanced in the loop. So the code worked when
I ran it in Linux as the first item was matching.
Thanks for Robert for spotting and reporting it.
When running in Windows platforms, set the GUI's checked platform
initially to Windows 32-bit ANSI. Other platforms are set
initially to default/unspecified which means the type sizes are
from the platform GUI was compiled on.
This was suggested by Rober in ticket #3119.
We have now one list for checked platforms, menu items are created
dynamically based on that list. This makes it much easier to alter
the platforms list later on.
This is quick and dirty patch to add the platform selection for
the GUI. It is simple menu selection in Check-menu. It always
defaults to "Default" at startup. And it forget the selection
when the application is closed.
Ticket: #3119 (GUI: add ability to specify platform type)
Refactor the code formatting statistics dialog content so that
the strings are easier to translate. Old formatting with embedded
HTML was practically impossible for translators to translate. New
code isn't very beautiful either but at least translating is now
possible.
Ticket: #2726 (GUI: HTML-formatted statistics report text hard to translate)
The CLI/LIB change earlier added own enable-flag for performance-
and portability-checks. This commit updates GUI to also enable
those new enable-flags.
Per project include directories must be added to the list before
the global include directories. Include directories are searched
in listed order. So placing per project include directories first
we ensure per project include file is found instead of the global
include file if same file exist in both.
The extra menu separator was added before the MRU menu items. When
updating the (menu) MRU items existing items were first removed
and new items added back. But the added separator was not removed.
Earlier the GUI (project) went into some weird state after creating
a new project. The project could not be checked in any discoverable
way.
This commit fixes the above bug by automatically checking the new
project after the project dialog is closed. I think this is what
most users expect to happen.
Exclude is the correct term to use when removing paths from the
list of checked items. Ignore as a term was a poor choise to begin
with. XML file reading still recognizes and reads the 'ignore'
element but writes 'exclude' element.
Ticket: #2995 (GUI: Rename ignore-feature to exclude-feature)
Since include dir order is important (Cppcheck uses the first file
it finds) user must be able to edit the order of include paths.
This commit adds "Up" and "Down" buttons to the Project-dialog's
inlude paths-tab. User can use those two buttons to re-order the
include directories.
Ticket: #3037 (GUI: Allow reordering include paths in project dialog)
The 'Project' label in Project-dialog is confusing and users think
it is project's name. When it acutually is the root directory of
the project. So rename the lable and move it below the 'Defines'-
field to make it less important looking.
Ticket: #2997 (GUI: 'Project'-field in project file-dialog is confusing)
The benchmark data file had errors when checking with Cppcheck.
And people reported these errors. So replace the file with one
that has no (currently found) errors.
The script is available in another repository. I don't want to
distribute it with Cppcheck sources for now. Maybe if and when
there is more interest towards GUI tests...
If the "extra version" is defined (not empty) then it is shown
after the actual version number in the About-dialog.
Ticket: #2164 ([GUI] Add revision info to "About" window)
If strings contain only formatting placeholders for the dynamically
formatted text it does not make sense to mark the strings as
translatable. There is nothing translators can translate e.g. in
"%p".
When Filter-toolbar was enabled/disabled from the View-menu its
state was not updated to the context menu. And vice versa.
Ticket: #2923 (GUI: Filter toolbar menu items not synchronized)
There always should be default editor if there is editor
application configured. But it is possible in some cases that
default application is "lost". So check that we have default
application configured before trying to use it. And inform user
to configure default application instead of silently failing to
open the application (and the file) for the user.
Don't use recursion in the script. The Python's os.walk() already
lists all files in subdirectories and using recursion only caused
tests to be found twice. Also handle the case the project file
defines binary path with DESTDIR define.
Improve the runner script to run only tests whose binary file
exists. Tests with inexistant binary file are not counted into
test counts in the summary.
Add the MIT license header. I'm now maintaining this script in
external repository with MIT license. So I can use the script
in other projects too.
Use build-time define to set the path to the source files
directory. Which then can be used to format path to the test
data. This allows running tests from out-of-source-tree -builds
that e.g. QtCreator does.
Test was using and assuming that severity string starts with
capital letter (e.g. "Style"). But the strings are all lowercase
letters.
Ticket #2832 (GUI: XML version 1 test fails)
Start building each test as separate project as QtestLib tests
usually are built. This commit adds the infrastructure and moves
TranslationHandler test as own project.
Fix I did yesterday gave only filename of the project file for
function loading project file. Causing the loading failing if
not in "current" directory.
If we there is project file in the directory to check then ask
user if one wants to use the project file instead. If there are
multiple project files then just tell there are project files
and ask if user wants to continue without using them.
Ticket: #2816 (GUI regression: Interrupted checking because of too many #ifdef configurations.)
If the project file does not define paths to check then check the
project root directory (which likely is the directory where the
project file is located).
Ticket #2816 (GUI regression: Interrupted checking because of too many #ifdef configurations.)
Setting organization and program name in main() allows us to
cleanup Settings class usage. As we don't need to keep using the
one instance of Settings but can create new Settings class
whenever we need to access settings. According to the Qt
documentation creating Settings class is fast.
Use project file's location as base path when adding new paths
(checked, included or ignored) to the project. In most cases user
wants to add paths in the same project so this reduces browsing
paths considerably when adding them.
When project files support was added to the GUI there was no GUI
for them and automatic/silent loading was added. So that if the
directory contained project file with the same name (and .cppcheck
extension) then the project file was automatically loaded and used
for the checking.
This can be very confusing for the user as there is no any
indication that the project file is used. But this solution was
necessary at that time to get project file support added.
Now that we have usable GUI for the project files this automatic/
silent loading can be removed. Nobody really should be using it
anymore. And even if the automatic loading is needed one can give
the project file for the GUI using command line parameter.
The project file to check just GUI code was missing the directory
to check. This is probably due it was used originally as
"automatically" loaded project file which assumed current
directory is checked and only added some additional parameters.
If the project file in MRU list does not exist ask user if one
wants to remove the file from the list. If user agrees then the
file is removed from the list. Otherwise the file is left to the
list but not tried to open. User may have accidentally moved or
renamed the file so we give a possibility to add it back and not
just blindly removing it from the list.
Add MRU items for project files to File-menu. When user creates
a new project file or opens existing project file it is added to
the list of recently used projects. Last 5 projects are remembered
and available for quick acess in the File-menu.
The ErrorLogger::reportStatus() is not lib code interface. The CLI
code does the looping through file list and gives one file at a
time for the core code. Hence lib has no any idea about the
progress and it can't provide such information.
Also the recent commit (6d858b6) caused a GUI build failure by
adding CLI code dependency to GUI. Which is big no-no.
This is admittedly a hack. But it allow us to build all modules
again.
Two Qt modules are not needed any more in the CMake script for the graphical
user interface after the commit "GUI: Open online-help instead of local help".
3965a08b7b (commit)
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Unify usage and API of CppCheck class. Allow only one file checked
at a time, instead of list of files. Clients can then handle file
lists more naturally and as they see fit. Also clients have better
knowledge of how checking status should be handled.
The single-threaded CLI checking was only one using the file list.
Other clients were giving files (to list) one file at a time.
Add new "Advanced" page to preferences-dialog and add there a
checkbox for enabling inconclusive checks. Now that checkbox is
the only control in that new page but there will be more controls
later on.
This is the first (and quick) support for the inconclusive errors.
We simply add [Inconclusive] to begin of the summary. This is
temporary solution until better GUI is implemented. XML v1 won't
be supporting inconclusive errors. For XML v2 we need still to
decide what to do.
GUI now recognizes -p <project file> command line parameter. When
given (with path to valid project file) GUI automatically loads
the project file and starts checking paths in it.
Ticket: #2613 (GUI: Should accept project file from command line)
I earlier added a check for missing (editor) application command
line parameters. If parameters are missing at GUI startup an
message is shown to user to check the settings. Unfortunately
my check was incomplete and it also triggered when there was no
applications defined. Which happens when user starts GUI for a
first time.
Fix the check so that user is only informed in case the parameters
are missing and name + path are set.
In GNOME the whole big text area was not shown without making the
dialog bigger. So improve the layout for better scaling and adjust
dialog size when it gets initialized.
Earlier user had to add quotation marks around application executable
path in application dialog. Because we could not determine which part
is path and which part is parameters. As we now have separate
variables we can automatically add the quotation marks when needed
before starting the application. This reduces the confusion users
have had about the correct formatting of paths.
Currently combined editor application path + params is a bit
problematic (at least in Windows). We really don't know where the app
path ends and parameters start. So proper quoting is not always
possible.
And application path and command line parameters are clearly
different settings anyway. So make them separate settings. It has
bunch of other positive sides too. Like one can now browse new path
for the application without loosing the parameters.
When starting Cppcheck version with these new settings user is warned
that loading settings had problems and asked to check and fix the
settings.
The library "htmlhelp" is not needed by the graphical user interface at the moment.
2fea5f01d6 (gui)/gui.pro
There are difficulties to fulfil this dependency.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The executable file for the graphical user interface was renamed in a CMake
script to synchronise this setting with the qmake build specification.
b88ce77e4a (gui)/gui.pro
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Local help does not currently work (ticket #2316) and building it
is a bit painful in Windows. Hence it was decided on ticket #2677
and at IRC that we open on-line help from GUI until the local
help issue is solved.
Ln pointed out in IRC that 'se' is not ISO-639 name of the Swedish,
but 'sv' is. So rename the translation file to use the correct
ISO-639 name. This wrong name also probably caused the GUI not
recognizing Swedish locale of the OS.
Translation of severity texts was temporarily disabled by earlier
commits. Now adding new method to ResultsTree for getting
translated severity string.
Convert from using string to enum values for severity in ErrorItem.
Storing and handling severity as string was the easy way earlier
but it is not convenient or efficient way to handle severities.
This commit is the first step in converting severity handling to
use the enum values instead of strings.
Show native path separators in project file-dialog. Convert paths
to internal separators when reading from project file and when
reading from the dialog. Convert to native separators when adding
to the dialog (for the user).
Add similar GUI than include paths has. Currently there is only
possibly select directories directly from the GUI. But filename
can be added to the path by editing it.
Add applying of filtering into list of files to check if we have
an active project file. Filtering is quite much similar to the
filtering in CLI.
If we have directory filter ("gui/") then we check all paths if
they contain "gui" part. In practice we search for string "/gui"
from the paths. If we have filename filtering
("gui/projectfile.cpp") then we check if any of the paths end
with that.
This patch adds support for ignored paths in the project file.
There is new <ignore> element which can contain one or more
<path> elements with name attribute containing the path to
ignore.
Handling paths in line edit control is quite hard. List control is
much more pleasant to use for it. Convert Project file path
handling to similar list control usage than include paths earlier.
Editing include directories in edit control is not nice. Instead
add new tab and list control for the include directories. They
are now added, edited and removed like global include directories
in settings dialog.
The default application was not handled correctly when removing
application from the list. If the default application is removed
then we reset the default application to unknown. Otherwise we
make sure the default application is correct after the removal of
other application.
Instead of keeping the default application as a first item in
the application list point the default application by adding a
"[Default]" text after its name.
Make the editor application settings dialog to look similar than
include paths dialog. Move buttons right to the list, not below.
And remove unnecessary "application" word from button texts.
Rename Modify-button to Edit-button since we are not modifying
the application but editing its info. Similarly rename Delete-
button to Remove-button since we are not deleting the application
but removing from the list.
Instead of hard-to-use single line edit control, use list control
for include paths. Have separate buttons for adding, editing and
removing paths. Paths are still stored as one string where paths
are separated with ";". Empty paths are ignored.
If there were unknown language in settings the fallback to English
language didn't work as expected. And there were no proper current
language set after that. Initialize current language to English
so we always have English as proper fallback.
GUI was storing selected language as index to the languages list.
This is fragile since the order and count of items can change.
This commit changes to using ISO language code (e.g. "en" for
"English").
Fixes ticket #2446 (GUI: Don't use index number for language selection)
Instead of separate language name and filename lists use one
list of structs. This makes language name and filename more
connected and makes handling of them easier.
XML report format 1 only had error "lines" that we promoted to "items"
when adding to GUI. XML report format 2 contains error "items" so
change the code to read items and do the promotion directly when
reading and parsing the data.
The current wording was confusing (espcially related to CLI) since
it said the option will make Cppcheck to check all #ifdef configs.
But this really is case only when there is excessive amount of
those configs and without the option some would be ignored. So
format the option text in line of CLI switch and say it is forcing
not enabling checking of all configurations.
When reading XML file there is no summary data stored so we must
dublicate the message data to summary. Since message can be long
try to find full stop from the message and cut summary to it.
Ticket: #2402 ([GUI] Summary is not shown for loaded .xml file)
Ticket #2513 (GUI: Garbage printed to log after missing include warning)
The linenumber was not properly converted to the QString so there
were garbage printed to the log.
Settings-dialog is more natural place for language selection than
the main menu. We also have more space and freedom there to have
longer text etc to make the selection easier (menus are quite limited
controls).
Ticket #2424 (Windows GUI: "Copy full path" doesn't copy the visible full path if it has been changed in preferences)
We keep paths internally with / separator and only convert to native
separators (for Windows) when showing them. Conversion was missing
from path copying function.
Dan added new enable-flag for information messages in commit 033e759.
Enable that flag for GUI so that the information messages are visible
in the GUI.
I accidentally added the 'placeholderText' attribute to settings.ui
when editing it with Qt Creator. That attribute was added in Qt
4.7.0 and we are not using it for anything. So removing it to fix
building with older Qt versions.
Add 'backend' support for the new 'portability' severity. The new
severity is handled, converted to new SHOW_PORTABILITY and added
with correct type to the result view.
There is no menuitem/toolbar button to show/hide portability
items. Likewise there is no line for portability issues in stats-
dialog.
Ticket #2106 (More severities and new xml format)
Show both short summary and verbose message in lower details panel
in the GUI: Add titles for short summary and message. Hopefully this
makes it easier to read the messages and copy/paste them too.
Revert change ca9f8a7036 that converted
text in Add Application -dialog to rich text. The text is plain
text and doesn't use any formatting so plain text is good for it.
This commit adds new setting and GUI for global include dirs. When
project file with include dirs is loaded, global includes dirs are
added first and after them the include dirs from project file.
After previous patches the details view was only updated when the
item was clicked with mouse. This patch improves the updating and
now it works also when changing selected item using keyboard.
This commit adds new rich text panel for the detailed error messages.
When user clicks error item the detailed error text is updated to
the panel. This way we have much more freedom in formatting the
message and user can easily copy/paste (parts of) the message.
Get rid of the form layout stretching the Browse-button so wide. Use
form-like but more flexible layout. Change the term 'Application to
execute' to 'Command to execute'. This reduces duplication and makes
clear difference between application name and the command to execute
to start the application. Fix also tab ordering so that the
application name field gets the focus initially.
Now DebugErrors get correctly routed to check log. The wrong slot
name also caused a warning printed to the console as reported by
thevbm in ticket #2006.
Debug errors were not shown anywhere in the GUI, they were just
ignored. This commit adds new signal for those debug errors and
directs them to checking log.
Solves ticket #1898 (GUI: Handle internal errors from lib)
* moved the help file to the application folder
* use absolute path instead of relative path for helpfile
* show warning messages if help file doesn't exist or fails to be loaded
Project closing action was not enabled when the project file was
opened from the checked directory. Also update the window caption to
contain project file name that was opened from the checked
directory.
The GUI was crashing if no project files were in checked directory.
I missed this case in my own testing because I had created test
project files for each directory. Whoops!
Anyway, this now also makes silently loaded project files (project
file residing in directory but not load by the user) as normal
projects in the GUI.
If rootpath is given in project file then use it as a current
directory. Also check if paths given in project file are
relative and use rootpath as base path for relative paths.
Add support for new root-element to project file. This element
defines project root directory if given. If not given then project
root is directory where the project file is located.
Now we load user-selected project file and start checking paths it
contains. Project file can be anywhere as long as it contains valid
path(s) to check.
Add new element containing paths to check into the project file. This
is for growing project files to real project files that can be loaded
and selected from the GUI. And decoupling project files from the
directory they reside. So you can put project file in any directory,
load it and it checks paths listed.
I accidentally committed two new files with filenames starting
with capital letters from Windows machine. The Linux build
breakage was fixed by fixing the include lines. But the correct
fix is to fix filenames as we are using all lower letter filenames
in this project.
Create a list of files to check. Currently we only read this list
once. But later on we can refer to this list to for example
determine which files were checked and which not in aborted
checking.
The _CRT_SECURE_NO_WARNINGS define suppresses some Windows-specific
compile warnings. Windows has "secure" versions of some functions
and compiler outputs warnings that those "secure" versions should
be used instead. Since other platforms don't have those functions
we just suppress this warning for now on.
Current directory was set from first file in the list. That file
could be in subdirectory when wrong path was set. Also getting
absolute path was buggy.
Current directory was set from first file in the list. That file
could be in subdirectory when wrong path was set. Also getting
absolute path was buggy.
Earlier commit allowed cppcheck to exit immediately while checking.
This however leads crashes and error logs shown since the thread
termination leaves things in inconsistent state. I thought cppcheck
would close fast enough so these could be ignored. But apparently
not.
So this commits adds new bool mExiting for MainWindow and sets that
to true when exiting while checking. When the checking is ready this
attribute is checked and if it is true the application can now be
cleanly exited.
At first we created the GUI in the code and so needed all the layouts
etc include to the code. Now when we are using UI files we don't need
all those included. So clean them up. Also use forward declarations
instead of includes in header files when possible.
Ensure that native separators are used in saved reports. Reports may
be parsed by other programs/scripts so it is important that paths
are properly formatted.
GUI used to show paths with / separator which is not native
separator in Windows. So lets convert shown paths to native
separators before adding them to the GUI.
This commit modifies and registers ErrorItem as proper metatype so it
can be used with Qt signals. Then sending Error-signals is refactored
so that ErrorItem instances are sent instead of several different
arguments that already contained couple of lists.
This commit separates logic more from the GUI. The dialog class is
only responsible from showing the dialog and handling data in it.
Other related classes do the project file reading/saving/etc.
When loading report from XML there is no full paths so the file's real
path is not known and cppcheck cannot open it. So if the file has no
absolute path then we ask where the file is located from the user.
When converting to use new ErrorItem and ErrorLine I made few mistakes
in how I handled the data. And for some reason there was not even
warnings about converting integers to QStrings.
This commits adds new "Open XML" item to File-menu. Selecting this
menuitem allows user to select report file to open. When the file is
read the error data is printed to debug output. Later patches will
implement adding error data back to the GUI.
Add new "New project file" item to File-menu and rename existing
"Project File" item to "Open Project File". Selecting new file
opens empty project file dialog. When the dialog is then closed
the user is asked to select a filename for the new project file.
Progress signal had also item count with it and then the handler determined
that check is ready when max count of progress was done. Also progressbar
was practically reset in every progress signal. This was simply fragile
code.
After this patch progress signal has only the current progress count. Total
count of items is given when initializing the checking. And there is
separate function for handling check finishing.
This also fixes the bug that progressbar was not hidden after checking
or when interrupting the checking.
The lupdate got confused of removing "Show security errors" and there being
existing string "Show style errors". lupdate thought the "Show style errors"
was a new version ("similar enough") of "Show security errors" string
instead of new string to translate. Or actually existing translated string.
So many translations got "Show style errors" translated by earlier
translation of "Show security errors".
This commit fixes the mess by manually removing "Show security errors"
references and restoring correct translations of "Show style errors" from
earlier file versions.
Good lesson to learn about lupdate behavior.
This commit adds new toolbar to the GUI for fast and easy switching of
different warning//error categories. The icons are currently just
placeholders until more descriptive icons are created.
Improve the system used to have separate versions of code of FileLister for
Win32 and Linux. New idea is to have Base FileLister class implementing
common code and then derived classes for Win32 and Linux specific code.
FileLister is not anymore a static class. Instead we use singleton of
derived class.
When creating makefiles with qmake one needs to give the target in command
line. E.g.
$ qmake -config debug
or
$ qmake -config release
For Visual studio projects both targets are generated by just running the
qmake command without switches.
Fixes ticket #436 (GUI: All style -severity). The possible style errors can be now selected visible / hidden so all severities have their own menu item.
CSV files are handy (and commonly used) to export/import data to other programs. CSV reports allow easy import of cppcheck error data to other programs for further processing.
Allthough I put it after QTranslator had failed to load the translation.
This still allows QTranslator to try and open the file with several
variations of the file. To user we'll tell that the default file is missing.
It was missing the file extension and QTranslator returns false
if it was unable to find the translation file which is just as good.
QTranslator can also check for several variations of the given filename.
This enables us to check if toolbar is visible or not. Earlier
we saved settings after the window was closed and checking for
toolbar visibility was not feasible anymore.
Also added QSetting value names to common.h
Work is halfway on both translations and .ui files.
I added a very quick and rough finnish translation.
The program now requires the translation files to be created before running
that can be done with lrelease gui.pro.
To compile the whole GUI one must do the following
cd gui
qmake
lrelease gui.pro
make
Having translated settings names is a bad idea. If user changes GUI language one loses settings. Also settings might be exported/imported and translated names might not work between systems/users.
Include guard naming fix (names starting with underscore+capital letter are reserved in C++, so we should not use those)
Codeblocks project file update
GUI reads per-project settings (automatically deallocated classes) from XML project file. The project file format is described in projectfile.txt. Example project file is added for gui.
See also forum discussion at:
https://sourceforge.net/apps/phpbb/cppcheck/viewtopic.php?f=3&t=46
Add "Authors" and "License" items to the Help-menu. When selected, these items open simple text file viewer dialog. The AUTHORS and COPYING files are embedded to the executable and shown in the dialog.
Kimmo Varis
Daniel Marjamäki
Marek Zmysłowski
Edoardo Prezioso
Thomas Jarosch
Ryan Pavlik
unknown
Robert Reif
Zachary Blair
Markus Elfring
Greg Hewgill
Lauri Nurmi
Sebastien Debrard
Erik Lax
Reijo Tomperi
vBm
Kimmo Varis
Sbastien Debrard
Tim Gerundt
Ettl Martin
Martin Ettl
Kimmo Varis
Guillaume Miossec
Daniel Marjamäki
Moritz Barsnick
Duraffort
Vesa Pikki
Aleksey Palazhchenko
Slava Semushin